Search Results

Search found 27428 results on 1098 pages for 'copy local'.

Page 916/1098 | < Previous Page | 912 913 914 915 916 917 918 919 920 921 922 923  | Next Page >

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Confused about the Windows 7 Preinstallation Kit

  - by David Brown

  I build custom PCs and would like to use the Windows 7 Preinstallation Kit to make installation go a little quicker and customize the Windows image. However, since each PC is built to a particular customer's specifications, the hardware will rarely be the same. So, I would like to have a single answer file that will work for everything. I'm not sure if that's possible, however. What I mostly want to do for now is add my support information as well as pre-set anything that I would normally change after each installation completes. I have a Windows 7 Professional Upgrade DVD set (both 32-bit and 64-bit), but no OEM disks. I copied the Install.wim file to my local drive and opened it in the Windows System Image Manager, but it asks me to choose a catalog file specifically for each edition of Windows 7. Will this limit the answer file to whichever edition I choose? I would think choosing Starter would give me the most basic settings, which would apply to all other editions, but I'm not entirely sure of this. I don't intend to install any extra applications or drivers. I merely want to insert an OEM disk, my OPK USB drive, and have it work for whatever edition of Windows 7 I'm installing. If a large number of similarly-configured PCs need to be built, I'll go ahead and create a custom answer file in that case, but for a single machine order, that seems like overkill. In addition, do I need a separate answer file for 32-bit and 64-bit versions of Windows 7? Or will it work for both, even though I copied the Install.wim file from the 32-bit disk? Thanks!

  Read the article

• Permissions on mac for itunes library with multiple users - idea

  - by John

  I currently have a lot of music on an external drive and my itunes set up from there. However, periodically, when the external drive isn't connected, itunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my mac HD is large enough to house the music collection. However, I have 4 family members - all with their own logins - using this same gob of music. I don't want 4 copies of the library, only one with all libraries referencing it. So, what I want to do is: 1 - move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. 2 - get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let itunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the itunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any xml library file editing if possible. Am I dreaming? Thanks for help.

  Read the article

• Disabling Skype automatic update

  - by user13267

  How to stop skype from searching or at least downloading update without consent? I want that annoying "Update skype now" dialog box that keeps popping up before I log in to Skype and after I log in to Skype from appearing at all. Few months ago this used to work: 1) C:\Users\”YourName”\AppData\Local\Temp folder. 2) Find the file called SkypeSetup.exe, and delete it. 3) Create a text file in the folder, rename it to SkypeSetup.exe 4) Right click on the new file you just created and ask for properties. 5) Next left click the security tab then left click the advanced button. 6) Now left click “Change Permissions” and then “Add”. Enter “Everyone” (without the quotes) where it sez’, “Enter the object name to select (examples):” and click “OK”. 7) Now check the “Deny” box for “Full control” and click “OK”. obtained from HERE, but now it seems this has stopped working. The worst part is Skype seems to download ~30MB of executable setup file without my knowledge before bugging me with the dialog box to update it, and there seems to be no direct way to disable this download. And disabling the skype updater service does not seem to work either. Is there any kind of patch or registry hack I can use to stop skype from auto updating? Or should I start looking for an alternative to Skype altogether?

  Read the article

• WAMP starts Apache or Mysql, but not both?

  - by ladenedge

  When I install WAMP, the Apache and Mysql services are set to run as the LocalService user and all works well. However, because I need to access remote UNC paths in my PHP code, I need to run at least Apache as a user that exists on both the local host and the remote host - I'll call him WampUser. When both Apache and Mysql are set to start as WampUser, I cannot start both at the same time. If both are stopped, I can start either successfully. When I attempt to start the other, I get Error 1053: The service did not respond to the start or control request in a timely fashion. This error appears immediately - there is no timeout. When at least one of the services is set to start as LocalService, both start fine. I can, therefore, solve my problem by setting Apache to WampUser and Mysql to LocalService, but I'm more interested in why this is happening in the first place. I'm especially curious because this situation does not occur on other servers - something I've done to this server has made these two services exclusive when running as the same user. Here are some miscellaneous data points: I am using Windows Server 2003. I've provided recursive Full Control to the C:\wamp directory for WampUser. Nothing appears in the event log after the service fails. No log entries appear in either the Mysql log or the Apache error log. Neither application appears in the process list when the appropriate service is stopped. Any ideas?

  Read the article

• How to prioritize openvpn traffic?

  - by aditsu

  I have an openvpn server, with one network interface. VPN traffic is extremely slow. I tried to do traffic control with this configuration (currently): qdisc del dev eth0 root qdisc add dev eth0 root handle 1: htb default 12 class add dev eth0 parent 1: classid 1:1 htb rate 900mbit #vpn class add dev eth0 parent 1:1 classid 1:10 htb rate 1500kbit ceil 3000kbit prio 1 #local net class add dev eth0 parent 1:1 classid 1:11 htb rate 10mbit ceil 900mbit prio 2 #other class add dev eth0 parent 1:1 classid 1:12 htb rate 500kbit ceil 1000kbit prio 2 filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 1194 0xffff flowid 1:10 filter add dev eth0 protocol ip parent 1:0 prio 2 u32 match ip dst 192.168.10.0/24 flowid 1:11 qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 qdisc add dev eth0 parent 1:11 handle 11: sfq perturb 10 qdisc add dev eth0 parent 1:12 handle 12: sfq perturb 10 But it's still extremely slow. I have an imaps connection that keeps transferring data continuously (I successfully limited the rate) but with openvpn I can't seem to get more than about 100kbit/s The internet connection speed is about 3mbit/s (symmetric) What could be the problem? Does the sport filter work for udp?

  Read the article

• Encrypted off-site data storage

  - by Dan

  My business has a rather unique problem. We work in China and we want to implement a file server paradigm which does not store any files locally, but rather in a server overseas. Applications would be saved onto our local machines, but data would be loaded directly into memory from the cloud, e.g. I load a docx into word at the beginning of the day, saving periodically to the cloud as I work on it, and turn off my computer at night, with nothing saved locally. Considering recent events, we worry about being raided by the Chinese authorities, and although all our data is encrypted, it would not be hard for the authorities to force us to give up the keys. So the goal is not to have anything compromising physically in China. We have about 20 computers, and we need an authenticated, encrypted connection with this overseas file server. A system with Active-Directory-like permissions would be best, so that only management can read or write to certain files, or workers can only access files that relate to their projects, and to which all access can be cut off should the need arise. The file server itself would also need to be encrypted. And for convenience, it would be nice if this system was integrated with each computer's file explorer (like skydrive or dropbox does, but, again, without saving a copy locally), rather than through a browser. I can't find any solution online. Does anyone know of a service that does this? Otherwise I'll have to do it myself (which kinda sounds fun, but I don't really have the time), and I'm not sure where to start. Amazon maybe. But the protocols that offices would use on their intranet typically aren't encrypted; we need all traffic securely tunneled out of the country. Each computer already has a VPN to a server in California, but I'm unsure whether it would be efficient to pipe file transfers through it. Let me know if anyone has any ideas. And this is my first post; feel free say whether this question is inappropriate/needs to be posted elsewhere.

  Read the article

• SQL server queries are really slow only on first run

  - by JoelFan

  Somewhat strange problem... when I start my .NET app for the first time after rebooting my machine, the SQL Server queries are really slow... when I pause the debugger, I notice that it's hanging on getting the response from the query. This only happens when connecting to a remote SQL server (2008)... if I connect to one on my local machine, it's fine. Also, if I restart the app, it works fast, even off the remote SQL server, and subsequent runs are also fine. The only problem is when I connect to a remote SQL server for the first time after rebooting my machine. What's more, I have even noticed this same exact behavior with a 3rd party app (also .NET) that also connects to a remote SQL server. Another piece of info... this has only started hapenning since I upgraded my machine from XP to Win7 (64 bit). Also, other developers on my team who upgraded to Win7 are seeing the same behavior (both with the app we're developing and the 3rd party .NET app). (copied from http://stackoverflow.com/questions/2014814/sql-server-queries-are-really-slow-only-on-first-run )

  Read the article

• Can't login via ssh after upgrading to Ubuntu 12.10

  - by user42899

  I have an Ubuntu 12.04LTS instance on AWS EC2 and I upgraded it to 12.10 following the instructions at https://help.ubuntu.com/community/QuantalUpgrades. After upgrading I can no longer ssh into my VM. It isn't accepting my ssh key and my password is also rejected. The VM is running, reachable, and SSH is started. The problem seems to be about the authentication part. SSH has been the only way for me to access that VM. What are my options? ubuntu@alice:~$ ssh -v -i .ssh/sos.pem [email protected] OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /home/ubuntu/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to www.hostname.com [37.37.37.37] port 22. debug1: Connection established. debug1: identity file .ssh/sos.pem type -1 debug1: identity file .ssh/sos.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: RSA 33:33:33:33:33:33:33:33:33:33:33:33:33:33 debug1: Host '[www.hostname.com]:22' is known and matches the RSA host key. debug1: Found key in /home/ubuntu/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: .ssh/sos.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentications that can continue: publickey,password Permission denied, please try again.

  Read the article

• Setting Up Apache as a Forward Proxy with Cahcing

  - by Karl

  I am trying to set up Apache as a forward proxy with caching, but it does not seem to be working correctly. Getting Apache working as a forward proxy was no problem, but no matter what I do it is not caching anything, to disk or memory. I already checked to make sure nothing is conflicting in the mods_enabled directory with mod_cache (ended up commenting it all out) and also I tried moving all of the caching related fields to the configuration file for mod_cache. In addition I set up logging for caching requests, but nothing is being written to those logs. Below is my Apache config, any help would be greatly appreciated!! <VIRTUALHOST *:8080> ProxyRequests On ProxyVia On #ErrorLog "/var/log/apache2/proxy-error.log" #CustomLog "/var/log/apache2/proxy-access.log" common CustomLog "/var/log/apache2/cached-requests.log" common env=cache-hit CustomLog "/var/log/apache2/uncached-requests.log" common env=cache-miss CustomLog "/var/log/apache2/revalidated-requests.log" common env=cache-revalidate CustomLog "/var/log/apache2/invalidated-requests.log" common env=cache-invalidate LogFormat "%{cache-status}e ..." # This path must be the same as the one in /etc/default/apache2 CacheRoot /var/cache/apache2/mod_disk_cache # This will also cache local documents. It usually makes more sense to # put this into the configuration for just one virtual host. CacheEnable disk / #CacheHeader on CacheDirLevels 3 CacheDirLength 5 ##<IfModule mod_mem_cache.c> # CacheEnable mem / # MCacheSize 4096 # MCacheMaxObjectCount 100 # MCacheMinObjectSize 1 # MCacheMaxObjectSize 2048 #</IfModule> <Proxy *> Order deny,allow Deny from all Allow from x.x.x.x #IP above hidden for this post <filesMatch "\.(xml|txt|html|js|css)$"> ExpiresDefault A7200 Header append Cache-Control "proxy-revalidate" </filesMatch> </Proxy> </VIRTUALHOST> Thank you once again!

  Read the article

• Is "DSLAM congestion" a legitimate reason for slow DSL?

  - by Jay Bazuzi

  My DSL has been extremely slow in the evenings recently. To test it, I telnet to my DSL Modem, and ping the gateway. This way I eliminate internet congestion and local network issues. In the mornings I get 30ms - 50ms pings. In the evenings, it bounces around a lot, but 10000ms pings are common. I complained to Qwest support, and they said it was a known issue on their end, their engineers were working on it, and wouldn't say anything else. A couple days later I complained again, and they sent out a technician. He tested my house wiring and found that one of them had a short. It was an unused line, so we disconnected it, and he said things looked better and left. My daytime speeds improved at this point, but evening is still bad. I complained to Qwest support again, and they said it was a problem with DSLAM congestion at their end, and that they were working on it, but no ETA. My neighbor has Qwest DSL and doesn't seem to have these problems. That seems strange. I go use her network when I absolutely must get online and mine is behaving badly. I can't tell if they're yanking my chain or not. Regardless, these speeds are crap. I'm paying for 7Mpbs but am lucky if I get 1/10th that in the evenings. My kids like to watch Netflix streaming movies, and it's just impossible after 5pm or so. Should I wait it out? Will complaining again produce any results? Should I change my subscription to a lower speed until they fix their end? Or switch to cable?

  Read the article

• can't ssh within LAN, but can connect from outside

  - by Patrick B.

  A strange issue: I have a desktop running Ubuntu 10.04 behind a Netgear WNR1000 router performing NAT. I would like to be able to ssh into the desktop from my laptop (running Windows 7 and Cygwin). When at home, both the desktop and the laptop are connected by wireless (the desktop is in a different room from the router). sshd seems to be running fine, since ssh localhost from the desktop works without trouble. Also, ssh my.ip.address from my laptop when it is not behind the router works fine (I am forwarding port 22 on the router to my desktop). However, ssh same.ip.address from within the LAN fails with "Connection refused". ssh 192.168.local.ip.address fails with a different message, "Connection timed out". I can connect if I first ssh to a machine outside the LAN. So far I haven't found anything with Google because with the search terms that seem like they would be relevant, the vast majority of people have the opposite problem - i.e., they can't connect from outside the LAN but can connect within it. I can port forward through a remote server when I'm at home, but this seems like a totally absurd way to connect two computers on the same home LAN. I have already tried stopping and starting sshd on the desktop. Any thoughts?

  Read the article

• OS X Apache giving 503 error for anything in /api directory

  - by WilliamMayor

  I have a locally hosted website that uses Smarty templates, I'm trying to get started on building an API for the site. I've used virtualhost.sh to create a local virtual host for this and other sites. I've discovered that if I put a directory called api at the root of any of these virtual hosts I will get a 503 error when I try to access anything inside. I am using mod-rewrite but so far only to append a .php extension when needed. Here are the error logs for a request: [Thu Feb 09 13:42:37 2012] [error] proxy: HTTP: disabled connection for (localhost) [Thu Feb 09 13:49:06 2012] [error] (61)Connection refused: proxy: HTTP: attempt to connect to [fe80::1]:8080 (localhost) failed [Thu Feb 09 13:49:06 2012] [error] ap_proxy_connect_backend disabling worker for (localhost) The middle line gave me a clue to look in my hosts file because why would a request go to [fe80::1]:8080? I commented out that line and tried again, this time the error was in connecting to the standard 127.0.0.1 localhost. I have concluded that perhaps there is some config file somewhere picking up the underlying request of localhost/api and pointing it somewhere other than my virtual host. At this point my ability to fix the problem fails me. Can anyone help?

  Read the article

• Linux Experts Riddle: Network output of 10MB/s on 10GB/s NIC

  - by user150324

  I have two CentOS 6 servers. I am trying to transfer files between them. Source server has 10GB/s NIC nd destination server has 1GB/s NIC. Regardless to the command used nor the protocol, the transfer speed is ~1 Mega byte per second. The goal is at least couple dozens MB per second. I have tried: rsync (also with various encryptions), scp, wget, aftp, nc. Here's some testing results with iperf: [root@serv ~]# iperf -c XXX.XXX.XXX.XXX -i 1 ------------------------------------------------------------ Client connecting to XXX.XXX.XXX.XXX, TCP port 5001 TCP window size: 64.0 KByte (default) ------------------------------------------------------------ [ 3] local XXX.XXX.XXX.XXX port 33180 connected with XXX.XXX.XXX.XXX port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.30 MBytes 10.9 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 1.0- 2.0 sec 1.28 MBytes 10.7 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 2.0- 3.0 sec 1.34 MBytes 11.3 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 3.0- 4.0 sec 1.53 MBytes 12.8 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 4.0- 5.0 sec 1.65 MBytes 13.8 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 5.0- 6.0 sec 1.79 MBytes 15.0 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 6.0- 7.0 sec 1.95 MBytes 16.3 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 7.0- 8.0 sec 1.98 MBytes 16.6 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 8.0- 9.0 sec 1.91 MBytes 16.0 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 9.0-10.0 sec 2.05 MBytes 17.2 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.68 MBytes 14.0 Mbits/sec I guess HD is not the bottleneck here.

  Read the article

• How can I set Vim to obey accents of my spoken language?

  - by naxa

  When pressing w or e in sentences with accents (written in my native language), such as the first one (marked **) here: **Éj-mélybol fölzengo** - csing-ling-ling - száncsengo. Száncsengo - csing-ling-ling - tél csendjén halkan ring. [1] the characters o, ö, among others [2], make my gVim think they are word-ends so it stops on them (in Normal mode). gVim stops on the positions marked with _ where it shouldn't: Éj-mélyb_ol f_ölzeng_o. I would like to set gVim so it properly handle words even when containing accents and other local characters. But where do I set this? I use it on Win32, vim v 7.3.46. [1] - excerpt of a poem by Weöres Sándor [2] - "others", not mentioned here :) like í, u are also a problem. On the other hand, gVim seems to already work with é and á. gVim version info: VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 27 2010 17:59:02) Included patches: 1-46 Compiled by Bram@KIBAALE Big version with GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse +mouseshape +multi_byte_ime/dyn +multi_lang -mzscheme +netbeans_intg +ole -osfiletype +path_extra +perl/dyn +persistent_undo -postscript +printer -profile +python/dyn +python3/dyn +quickfix +reltime +rightleft +ruby/dyn +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white +tcl/dyn -tgetent -termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save +xpm_w32

  Read the article

• DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

  - by Craig M

  I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas? Edit: I completely forgot I'd asked this question until harrymc posted his answer. I've since found out that to fix this problem, I need to disable my Local Area Connection and re-enable it. Once I do that I have no trouble making network connections until the next time I reboot at which point I repeat the process. It's annoying, but manageable since I reboot very infrequently.

  Read the article

• Configuring port forwarding for SSH - no response outside LAN [migrated]

  - by WinnieNicklaus

  I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

  Read the article

• scp No such file or directory

  - by Joe

  I've a confusing question for which superuser doesn't seem to have a good answer, and neither google. I'm trying to scp a file from a remote server to my local machine. The command is this scp user@server:/path/to/source/file.gz /path/to/destination The error I get is: scp: /path/to/source/file.gz: No such file or directory user is my username on the server. The command syntax appears fine to me. ssh works fine and I can cd to the file and it doesn't seem to be an access control issue? Thanks; Edit: Thank you John. I spotted the issue. ls returned this: -r--r--r-- 1 nobody users 168967171 Mar 10 2009 /path/to/source/file.gz So, the file was on a read-only file system and user is able to read it but not scp. I just copied the file to a different directory and chown it and worked fine. It would be good if someone can explain why this is the case though.

  Read the article

• JBoss7 load balancing with mod_proxy_balancer - session not working

  - by Phil P.

  I am trying to set up mod_proxy_balancer for routing requests to 2 jboss7-servers. For the time being I am testing this setup on my local machine, using following config in httpd.conf: ProxyRequests Off <Proxy \*> Order deny,allow Deny from all </Proxy> ProxyPass / balancer://mycluster/ stickysession=JSESSIONID|jsessionid scolonpathdelim=On <Proxy balancer://mycluster> BalancerMember http://localhost:8080 route=node1 BalancerMember http://localhost:8081 route=node2 Order allow,deny Allow from all </Proxy> and in the standalone.xml file of each jboss I have defined the jvmRoute system property: <system-properties> <property name="jvmRoute" value="node1"/> </system-properties> At http:// localhost/myapp the application is accessible but the java-session is not build up correctly. Consequently the authentication is not working. The funny thing is, that everything is working if I turn off one JBoss-instance. As I have tried a couple of settings already, I am thankful for any further suggestions.

  Read the article

• How to solve/disable spam sending with my postfix server on linux

  - by Dukla

  I am quite new in setting up e-mail server on linux - I barely set up the whole think to get it working and connected it with my domain and php script which uses PHPMailer 5.2.1. In my setting I am using smtp server from my web provider (domain) and all e-mail which are not defined (trash) are sent on one simple address like I have address [email protected]. So when somebody will send email to [email protected] it will be forwarded again to [email protected] even in case of failure. I am receiving emails like: Hi. This is the qmail-send program at comercio.interone.com.br. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: Sorry, no mailbox here by that name. (#5.1.1) --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 49156 invoked from network); 25 Jun 2012 07:34:57 -0300 Received: from unknown (HELO S0106602ad08df877.no.shawcable.net) (70.66.34.103) by hosting.interone.com.br with SMTP; 25 Jun 2012 07:34:57 -0300 Message-Id: <20120625034039.B45C12DCC3B13A22F261@GANDERTO-015445> From: Ezra Whitehead <[email protected]> To: toa <[email protected]> Reply-To: Jamey Mcconnell <[email protected]> Subject: Welcome toa Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Visit our shop http://44090.medicneed.ru/ 113B726C73560AA41A68163AA474D5F1476 0225770686522678 As you can see there is line From: Ezra Whitehead <[email protected]> I am sure I did not send this email from my domain.com with some Davis8FB name and some russian page. This is just one of many and only NOT-delivered e-mails - there can be much more which has been sent successfully! What do I have wrong in my settings? How can I make it right? What should I do to prevent these messages to send? Where should I look? Thank you all.

  Read the article

• Setup for a live (low-latency) audio video broadcast over Wi-Fi?

  - by Majal Mirasol

  The Upgrade We are capturing audio (from mixer) and video (from a camera) from a main auditorium and passing it to separate rooms within the building. We used to have done this via manual audio/video cables and wires. We wanted to "upgrade" the system and wirelessly broadcast the stream via Wi-Fi. The Problem In our current setup (Wirecast running on A10 on a Wireless-N network), we have the problem of delay. Our streams are delayed from a minute up to five minutes on the clients (laptop/iPad/Android). This had not been a problem from the previous wired connections. Since the wireless network is local, we thought that a delay of less than a second should be achievable. Our Question And so it goes. Anybody there who has any experience for a setup that has both low latency and at the same time user-friendly to clients streaming in the program? Any recommendations would be highly appreciated. (Our current setup in on Windows 7, but setup on a dedicated Linux box is preferred, if achievable.)

  Read the article

• Why can't I use SSL certs imported via Server Admin in a custom Apache install?

  - by morgant

  I've got a couple of Mac OS X 10.6.8 Server web servers that run a custom AMP255 (Apache 2.x, MySQL 5.x, and PHP 5.x) stack installed using MacPorts. We've got a lot of Mac OS X Server servers and generally install SSL certs via Server Admin and they "just work" in the built-in services, however, these web servers have always had SSL certs installed in a non-standard location and used only for Apache. Long story short, we're trying to standardize this part of our administration and install certs via Server Admin, but have run into the following issue: when the certs are installed via Server Admin and referenced in our Apache conf files, Apache then prompts for a password upon trying to start. It does not seem to be any password we know, certainly not the admin or keychain passwords! We've added the _www user to the certusers (mainly just to ensure they have the proper access to the private key in /etc/certificates/). So, with the custom installed certs we have the following files (basically just pasted in from the company we purchase our certs from): -rw-r--r-- 1 root admin 1395 Apr 10 11:22 *.domain.tld.ca -rw-r--r-- 1 root admin 1656 Apr 10 11:21 *.domain.tld.cert -rw-r--r-- 1 root admin 1680 Apr 10 11:22 *.domain.tld.key And the following in the VirtualHost in /opt/local/apache2/conf/extra/httpd-ssl.conf: SSLCertificateFile /path/to/certs/*.domain.tld.cert SSLCertificateKeyFile /path/to/certs/*.domain.tld.key SSLCACertificateFile /path/to/certs/*.domain.tld.ca This setup functions normally. If we use the certs installed via Server Admin, which both Server Admin & Keychain Assistant show as valid, they're installed in /etc/certificates/ as follows: -rw-r--r-- 1 root wheel 1655 Apr 9 13:44 *.domain.tld.SOMELONGHASH.cert.pem -rw-r--r-- 1 root wheel 4266 Apr 9 13:44 *.domain.tld.SOMELONGHASH.chain.pem -rw-r----- 1 root certusers 3406 Apr 9 13:44 *.domain.tld.SOMELONGHASH.concat.pem -rw-r----- 1 root certusers 1751 Apr 9 13:44 *.domain.tld.SOMELONGHASH.key.pem And if we replace the aforementioned lines in our httpd-ssl.conf with the following: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem This prompts for the unknown password. I have also tried httpd-ssl.conf configured as follows: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.concat.pem And as: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCACertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem We've verified that the certificate is configured to allow all applications access it (in Keychain Assistant). A diff of the /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem & *.domain.tld.key files shows the former is encrypted and the latter is not, so we're assuming that Server Admin/Keychain Assistant is encrypting them for some reason. I know I can create an unencrypted key file as follows: sudo openssl rsa -in /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem -out /etc/certificates/*.domain.tld.SOMELONGHASH.key.no_password.pem But, I can't do that without entering the password. I thought maybe I could export an unencrypted copy of the key from Keychain Admin, but I'm not seeing such an option (not to mention that the .pem options are greyed out in all export options). Any assistance would be greatly appreciated.

  Read the article

• Cannot send email outside of network using Postfix

  - by infmz

  I've set up an Ubuntu server with Request Tracker following this guide (the section about inbound mail would be relevant). However, while I'm able to send mail to other users within the network/domain, I cannot seem to reach beyond - such as my personal accounts etc. Now I have no idea what is causing this, I thought that all it takes is for the system to fetch mail through our exchange server and be able to deliver in the same way. However, that hasn't been the case. I have found another server setup in a similar fashion (CentOS 5, Request Tracker but using Sendmail), however it is a dated server and whoever's built it has kindly left no documentation on how it works, making it a pain to use that as a reference system! :) At one point, I was told I need to set up a relay between the local server's email add and our AD server but this didn't seem to work. Sorry, I know next to nothing about mailservers, my colleagues nothing about Linux so it's a hard one for me. Thank you! EDIT: Result of postconf -N with details masked =) alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = myhost.mydomain.com, localhost.mydomain.com, , localhost myhostname = myhost.mydomain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = EXCHANGE IP smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Sample log message: Sep 4 12:32:05 theedgesupport postfix/smtp[9152]: 2147B200B99: to=<[email protected]>, relay= RELAY IP :25, delay=0.1, delays=0.05/0/0/0.04, dsn=5.7.1, status=bounced (host HOST IP said: 550 5.7.1 Unable to relay for [email protected] (in reply to RCPT TO command))

  Read the article

• Registering publicly Mail server and Web server in a free dns server

  - by Bruno Vieira

  I'm trying to host the e-mails and the site of our company into our private server. I've already followed the Gentoo Virtual Mailhosting System with Postfix Guide and my mail server is working (actually it sends mails for the local users and for external users it goes to spam) and know how to set an Apache 2 server. What I don't know (and I mean really don't) is how to make them public. I did some research and found that I should ask my ISP to change the reverse DNS to my company domain in order to prevent my mails to be marked as spam, they are doing. I already know I have to configure a DNS Server, it seems like my register provider already has one but I don't know how I can configure CNET, A, MX, TXT and all those tags (Is it tags the name?) and If I must do some other configuration on my server. My Server: Linux mail 3.2.21-gentoo #1 SMP My /etc/hosts: 127.0.0.1 mail.example.com.br example example.com.br ::1 mail.example.com.br mail example.com.br My /etc/conf.d/hostname: hostname ="mail" What am I missing? If there's a guide about how to configure I would really be grate. Thanks in advance for the help. Cheers

  Read the article

• Use launchctl to fire an AppleScript script periodically

  - by Daktari

  I have written an AppleScript that lets me back up a particular file. The script runs fine inside AppleScript Editor: it does what it's supposed to do perfectly. So far so good. Now I'd like to run this script at timed intervals. So I use launchctl & .plist to make this happen. That's where the trouble starts. the script is loaded at set interval by launchctl the AppleScript Editor (when open) brings its window (with that script) to the foreground but no code is executed when AppleScript Editor is not running, nothing seems to be happening at all Any ideas as to why this is not working? -- After editing (as per Daniel Beck's suggestions) my plist now looks like: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>KeepAlive</key> <false/> <key>Label</key> <string>com.opera.autosave</string> <key>ProgramArguments</key> <array> <string>osascript</string> <string>/Users/user_name/Library/Scripts/opera_autosave_bak.scpt</string> </array> <key>StartInterval</key> <integer>30</integer> </dict> </plist> and the AppleScript I'm trying to run: on appIsRunning(appName) tell application "System Events" to (name of processes) contains appName end appIsRunning --only run this script when Opera is running if appIsRunning("Opera") then set base_path to "user_name:Library:Preferences:Opera Preferences:sessions:" set autosave_file to "test.txt" set autosave_file_old to "test_old.txt" set autosave_file_older to "test_older.txt" set autosave_file_oldest to "test_oldest.txt" set autosave_path to base_path & autosave_file set autosave_path_old to base_path & autosave_file_old set autosave_path_older to base_path & autosave_file_older set autosave_path_oldest to base_path & autosave_file_oldest set copied_file to "test copy.txt" set copied_path to base_path & copied_file tell application "Finder" duplicate file autosave_path delete file autosave_path_oldest set name of file autosave_path_older to autosave_file_oldest set name of file autosave_path_old to autosave_file_older set name of file copied_path to autosave_file_old end tell end if

  Read the article

< Previous Page | 912 913 914 915 916 917 918 919 920 921 922 923  | Next Page >