Search Results

Search found 29222 results on 1169 pages for 'network security'.

Page 917/1169 | < Previous Page | 913 914 915 916 917 918 919 920 921 922 923 924  | Next Page >

• Why can my Mac not connect to my iPhone via ssh?

  - by martin08

  I couldn't always ssh to my iPhone from my Mac. They're both on the same wifi network but sometimes the connection is established, sometimes it failed. From my Mac: $ ssh [email protected] ssh: connect to host 192.168.0.102 port 22: Operation timed out $ ping 192.168.0.102 PING 192.168.0.102 (192.168.0.102): 56 data bytes ping: sendto: No route to host ping: sendto: Host is down ping: sendto: Host is down I enabled SSH on the phone and am sure it can load webpages. So what might be a reason why they cannot connect? Thanks

  Read the article

• Ubuntu 12.04 host lookups extremely slow

  - by tubaguy50035

  I'm having issues with one of my servers taking a long time to look up host names. This is an Ubuntu 12.04 box, so I've tried following the new resolvconf directives. In my /etc/network/interfaces file, I defined my name servers like this: auto eth0 iface eth0 inet static address someaddress netmask 255.255.255.0 gateway 198.58.103.1 dns-nameservers 74.14.179.5 72.14.188.5 In my /etc/resolv.conf, I see these name servers, like this: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 74.14.179.5 nameserver 72.14.188.5 On another box, I edited the resolv.conf directly as directed by my hosts' setup help files. It looks like this: domain members.linode.com search members.linode.com nameserver 72.14.179.5 nameserver 72.14.188.5 options rotate This second box has no issues with host name look ups and responds quite quickly. Could not having the domain and search directives make my look ups slow? By slow, I mean it's taking anywhere from 5 to 15 seconds to find the IP address of a host.

  Read the article

• Wired connection to windows ISC stopped working

  - by cmpickle

  I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

  Read the article

• accessing files on a shared folder via IIS

  - by Darkcat Studios

  Im not sure if this suits stackexchange, serverfault or here... so i'll go with here for a start. I'm having issues setting up a network share to be accessed by IIS, all I need to do is read/write files on the Other server. We have 2 servers set up (Both 2008 R2 & IIS 7.5), one is the WEB server, which is externally accessible and NOT part of the domain. We also have an Intranet server which has no internet connectivity and is part of the domain. These 2 servers can talk to each other happily, I have the SQL server on the WEB server shared across to the intranet server so that the web content is editable from the intranet. I can share a folder on the web server (say, wwwroot/Images/) and connect to it from the intranet server, even have it as a mapped drive (but i know thats not going to work for IIS to access it), So there seems not to be a connectivity issue. I can also set up a Virtual folder in IIS on the Intranet server - this is where it gets annoying - I cant connect using pass-through authentication because there is no suitable user on the web server (which is not on the domain). If i set up a user on the web server, eg Intranet_USR, and give it appropriate rights to the folder, files and share, i can connect, but only view folder contents in IIS, not read, although that user has read privileges!! Any help much appreciated!

  Read the article

• How to route traffic through a VPN tunnel?

  - by Gabriel

  The problem with our server is that we need to use the bug ridden and awful AT&T network client, which causes our server to bluescreen once per 24 hours. Does any one know how to (or has a good guide) quickly set up a workstation running Windows server 2008 R2 as a proxy server. So this spare workstation would run AT&T and would act as a bridge between our server and the server that can be connected to only via the AT&T VPN software. And this way our own production server would not crash so often (or not at all) and the workstation can happily crash whenever it wants to.

  Read the article

• Samba domain trust errors on a specific interface

  - by John K

  We have a windows domain that also has RHEL member servers in it. All the servers have a primary network connection to the LAN, but some servers also have private dedicated links to one of our RHEL servers, which serves as a head to our SAN storage. This particular server is running Samba 3.5.15, and is running in domain authentication mode. Users can access shares on this server without a problem over the LAN connection from our Windows servers, but if a user tries to access the shares over a private link (i.e. a 192.168.1.2 address to the RHEL server) users get an error "The trust relationship between this workstation and the primary domain failed."

  Read the article

• Today's Links (6/27/2011)

  - by Bob Rhubart

  2011 Entrepreneurs of the Year, Northern California Region Drake Martinet reports on the new batch of entrepreneurs joining the ranks of Oracle CEO Larry Ellison, Yahoo CEO Carol Bartz and eBay co-founder Pierre Omidyar as the Norther California Region winners of Ernst & Young's Entrepreneurs of the Year awards. Technical Article: Caching Strategies for Oracle Service Bus 11g William Markito Oliveira illustrates how the right caching strategy can make a big difference in application performance. Kscope 11 - Day 1 and 2 Oracle ACE Director Markus Eisele checks in from Long Beach. Kaleidoscope 2011: Sunday’s Symposium And so does Oracle ACE Director Marco Gralike. Yet another GlassFish 3.1.1 promoted build | The Aquarium "This version was carefully designed to be highly compatible with the previous 3.x versions," says Alexis, "thus leaving you with little reasons not to upgrade as soon as it comes out this summer." Using NoSQL database in your Java EE 6 Applications on GlassFish - MongoDB for now! "The NoSQL databases are not intended to be a replacement for the mainstream RDBMS," says Arun Gupta. I have a performance problem | Alan Hargreaves Good (and entertaining) advice from an Australian Solaris and Network Domain TSC* Principal Field Technologist.

  Read the article

• rdiff-backup failed due to target machine being down, but is unkillable

  - by Markus

  My backup script was invoked by cron, using rdiff-backup to backup the user files onto a target system in the network. That target computer went down at some point, yet still appeared as mounted on the server. rdiff-backup didn't do anything, but still appears as a process. kill-ing doesn't stop it. Similarly, running rdiff-backup for other directories works but doesn't exit properly and remains in the process list. Is there anything short of rebooting the server that I can try?

  Read the article

• How do I restore the default applets to Gnome's notification area?

  - by gbacon

  I have a fresh install of Karmic Koala. In a botched attempt at trying to change my default window manager, I somehow removed at least three applets from the notification area: network manager (nm-applet), volume control (gnome-volume-control-applet), and the battery meter (???). Now if I logout and back in, these applets don't run, but I can start them from the command line. Because it's a fresh install, I completely removed my luser account and home directory. After recreating my account, I was frustrated to find that the applets are still missing and no obvious way to add them back. How can I restore the default configuration?

  Read the article

• What are my X client options for MS Windows?

  - by Nick Bolton

  I need to connect to a headless X Windows server (running on Ubuntu) from my MS Windows 7 computer over a 100 Mbit network. I could use VNC (or any other remote viewer) but the 3D graphics performance would be lousy I imagine. I used to have it hooked up to a monitor, but that's broken now and I can't afford a new one. A friend advised that I could try and use an X client, and that the 3D graphics wont suffer too much over 100 Mbit. Cygwin seems to be an option, but I was wondering if there were any more lightweight options.

  Read the article

• What type of wireless adapter for Verizon Fios?

  - by ShoeLace1291

  I have verizon fios internet service. I believe they use a Wireless G router, but I just have one question. I currently am using a 54mbps wireless pci adapter in my Windows 7 custom build. It drops the internet connection all the time and is starting to get very irritating. I'm thinking about buying a new one, but all the 300mbps cards on newegg are wireless n. So my question is, will a wireless n network adapter make a difference with a wireless g router?

  Read the article

• Accessing non-port80 web server using IPv6

  - by logain

  In a normal IPv4 network, I can go into any browser such as Firefox and browse a server on a IPv4 address not hosted on port 80: (add http:// - Super user stops "new" users from adding links)192.168.42.6:8080/ This accesses the server on Port 8080 on 192.168.42.6. However, if I try this with a IPv6 IP, I get no luck. This tries to access port 8080 on fe80::520:ff0f:ece0:1 : http://[fe80::520:ff0f:ece0:1]:8080/ Firefox will automatically "fix" this URL to: http://[www.fe80::520:ff0f:ece0:1.com]:8080/ which does not help me access it at all. So either I am doing something really wrong OR there's something really wrong with IPv6. Couldn't find anything that even remotely helped on the Internet. (And yes, there is a server running on the IPv6 in question)

  Read the article

• Ethernet port sleeping on PS3 running linux

  - by Doug

  My lab has a PS3 running Ubuntu Linux 9.04 Server Edition. After a period of a few hours with no use, the Ethernet connection (eth0) seems to go to sleep, causing the connection to be lost. Pinging or trying to SSH into the machine results in no response. The fix I've been using is to access the machine locally and restart it (trying to bring eth0 down then up doesn't seem to correct it). I've tried setting up an hourly cron job that runs on the PS3 and pings another machine just to create network activity, but this doesn't seem to solve the problem either. Update: The solution was to run the above cron job much more frequently: every 10 minutes works.

  Read the article

• No internet on some devices, still on WiFi

  - by Joost

  Ok, here's the situation. I live with 3 friends, and we often sit in the living room with laptops out. There's a WiFi router in the kitchen, and we have quite a stable connection. The issue, however, is this: sometimes, all of a sudden one of my friends loses internet connection. Even disconnecting/reconnecting to the WiFi network does not help. When we restart the router, though, it works like a charm again. The odd thing is, it happens just for this one Windows 7 laptop. We've switched routers (for a different reason) in the mean time, but the issue remained. This makes me suspect the laptop even more. I realise I've given little details, but I don't really know what to try/do. Any suggestions what it might be?

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

• Why can't gif images copy at a reasonable speed on this dell laptop with XP?

  - by alt234

  I've got this somewhat old Dell Latitude D810. Strangest thing... If I try to copy anything that has gif files in it the gif files take forever. Like a few minutes per gif regardless of size. Everything else copies fine. I notice this when copying files off our network, copying off multiple external drives, and even when files are copying during an installation process. I'm on Windows XP Pro service pack 3. I've never seen anything like this before. Anyone else?

  Read the article

• what to do when ctrl-c can't kill a process?

  - by Dustin Boswell

  Ctrl-c doesn't always work to kill the current process (for instance, if that process is busy in certain network operations). In that case, you just see "^C" by your cursor, and can't do much else. What's the easiest way to force that process to die now without losing my terminal? Summary of answers below: Usually, you can Ctrl-z to put the process to sleep, and then do "kill -9 process-pid", where you find the process's pid with 'ps' and other tools. On Bash (and possibly other shells) you can do "kill -9 %1" (or '%N' in general) which is easier. If Ctrl-z doesn't work, you'll have to open another terminal and kill from there.

  Read the article

• Best Practices in Preventing Locks in File sharing in Windows?

  - by crosenblum

  We have a web development server, that has our source control on it. That we use via mapped drives to open/edit/save/create files on to it. But I have noticed a lot of weird glitches with either the file lock/sharing/etc For example, if i have a file open on my local pc, and try to check out that file via my source control on dev, it error's out. The source control I use is QCVS by Qumasoft. Or If I use cuteftp to download something to dev, via my local pc, it won't download unless I close that file. So my brain sniff's and figures this is either an issue with folder/network/sharing, or an issue of permissions. Has anyone else had similar issues, and what did they do to fix it permanently? Thank you...

  Read the article

• View scheduled recordings remotely

  - by Scott

  I have one computer which is equipped with a TV tuner card. The Recorded TV folder is shared so that other computers on the network can watch recordings. Now that I am upgrading my computers to Windows 7, they have Media Center, which makes for a nicer viewing experience than a Windows Explorer folder view. I have set up Media Center on my laptop to considering the Recorded TV folder on the tuner-equipped PC as an extended library location, so now I can view all the recordings from within Media Center on the laptop. To make this experience even better, is there a way to view the list of scheduled recordings on the tuner-equipped PC from within Media Center on my laptop?

  Read the article

• Windows Server 2008 Static IP Address

  - by Gauls

  I have Win 2008 Server VM and want to set static IP address so that i can RDP into instead of using VM player (mouse gets out of focus as the size of the VM increases). Now while making the changes i see two TC/IPv6 and TC/IPv4 i try changing the IPaddress from obtain autimatically, but it always goes to "Unidentified Network". If i leave it to automatically obtain IP,i still cannot RDP into it. I have tired disabling TC/IPv6 from reistry. Any other suggestions? BTW the same setting works fine with WIN XP and i can RDP into all Win XP VM's Cheers Gauls

  Read the article

• esx 4 - c7000 - cisco 3020

  - by gdavid

  I have 4 blades with esx 4 installed in a HP c7000 enclosure. They have 6 cisco 3020 for hp switches in the backend. The plan was to use 2 switches for iSCSI traffic and the other 4 for data traffic. I am having a problem trunking the switches to our existing environment. The documentation i keep finding online has commands/features that are not available on the 3020 switch. Does anyone have this setup anywhere? I am looking to do Virtual Switch Tagging (VST) so i can control the machines vlan via the port groups. The only time any configuration worked for us was when our network team placed the command switchport native vlan x this setup only allowed vlan x to pass traffic and only when the port group was in vlan 0. Ideas? thanks for any help. -GD

  Read the article

• cannot boot Ubuntu after fresh install

  - by Jonathan

  I just installed Ubuntu on a Lenovo v570, and cannot boot into the system. All I get is a loop, where some (bios) info is displayed, and then the computer asks me where I would like to boot from. I tried reinstalling, reinstalling with a custom partition scheme, and boot -repair after the install. None of these work. I can see the files on my harddisk have been copied. I have installed many Ubuntus in the past, as well other distros where custom partitioning is required. I don't know where to find any useful information since I don't even get too the grub menu. One odd thing I noticed. The bios now had options to boot USB, OpenSuse,Fedora, or the HD. I am not dual booting. I also realized that the boot info is for a network boot, which means the computer is not recognizing what to boot. It is boot an HD problem, because I can install other OSs just fine. I am completely stumped. I would like to settle this, and end up with a tutorial, that explains to me what happened.

  Read the article

• How do sites avoid SEO issues / legalities with subdomain unique ids?

  - by JM4

  I was looking through a few websites recently and noticed a trend I'm not sure I understand. Sites are creating unique referral URLs for customers in the form of: http://customname.site.com (If somebody were to use http://www.site.com/customname it would function the same way). I can see the sites are using 302 redirects at some point using Google Chrome then doing some sort of htaccess redirect, taking the subdomain name (customname) and applying it as a referral parameter then keeping in session during the entire process. However, there must be thousands of these custom URLs that people are typing in. How are each one of these "subdomains" not treated as separate URLs which in turn are redirected to the same page (in short, generating tons of links all pointing to the same page which Google would normally frown upon)? Additionally, the links also appear on the site themselves as clickable links so I'm not sure how these are not tracked. Similarly, the "unique" url is not indexed or cached in any Google search results. How is this capability handled? It does NOT highlight the referral aspect, but a true example of this is visiting http://sfgiants.com which does a 302 redirect to the much longer proper San Francisco Giants MLB homepage. I am wondering how SFgiants.com is not indexed (assuming that direct shortened link appears on several MLB pages)? 1 - I know these are 302 redirects, I can see this on the sites network flow. 2 - These links do in fact appear on the page itself because in some areas (for example, the bottom of the page may say: send this page to a friend! http://name.site.com/ which in turn would again redirect to something like http://www.site.com?id=name so the id value could be stored in session

  Read the article

• Block a machine from accessing the internet

  - by Simon Rigby

  After some confirmation that I have thinking right in this scenario. We have a number of wired and wireless machines which presently have direct internet access. I also have a Linux (Ubuntu) server which is used as a file server for the network. Essentially I would like to be able to turn internet access on and off for machines. My plan is to block these machines by MAC address at the router. I would then set up a proxy server on the Linux box (ie Squid) so that the machines I wish to restrict can access the internet via the proxy. As I can adjust access via ACLs in squid, I would be able to switch on or off a machines access to the internet without having to further adjust the router's MAC rules. And of course I could go further and create a few scripts to assist with this admin task. Does this seem sound and have I over looked anything? Any help greatly appreciated. Simon.

  Read the article

• Very slow accessing printer shared from Windows Machine

  - by Tarski

  How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

  Read the article

< Previous Page | 913 914 915 916 917 918 919 920 921 922 923 924  | Next Page >