Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 92/1008 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Why do things change between using a LiveCD/LiveUSB and installing Ubuntu?

  - by ahow628

  Here have been a couple of weird experiences I've had with a Ubuntu LiveCD or LiveUSB: 1) I had one of the original Chromebooks (CR-48). I ended up wiping ChromeOS and installing only Ubuntu 12.04.0 just after it came out. It worked like a charm. About a year later, I broke something and reinstalled Ubuntu using 12.04.3 on a LiveUSB. The LiveUSB worked perfectly - screen resolution, wifi, trackpad all worked fine. I installed it (once installing updates, once stock from the USB drive) and both times screen resolution, wifi, and trackpad all broke. I ended up downloading 12.04.0 and installing it then upgrading to 12.04.3 after the fact and everything worked perfectly once again. 2) I purchased a Toshiba Portege z935 and the LiveUSB worked perfectly, namely the wifi. After install, wifi was extremely slow and basically couldn't load any pages. The answer was that Bluetooth conflicted somehow with wifi and Bluetooth had to be disabled to get wifi to work. Yet both could be enabled in the LiveUSB version, no problem. So my question is, why does this happen? Why does everything work perfectly from the LiveUSB version but then get broken when installed on the system? Is there a different way to install Ubuntu that would allow things to be installed over exactly as they were on the LiveUSB version (drivers, settings, etc)? Are there assumptions that the install makes that I could override somehow?

  Read the article

• Cannot start tor with vidalia, failed to bind listening port because of tor-socks running

  - by ganjan

  I get these errors trying to run tor with vidalia Apr 19 21:55:15.371 [Notice] Tor v0.2.1.30. This is experimental software. Do not rely on it for strong anonymity. (Running on Linux i686) Apr 19 21:55:15.372 [Notice] Initialized libevent version 1.4.13-stable using method epoll. Good. Apr 19 21:55:15.373 [Notice] Opening Socks listener on 127.0.0.1:9050 Apr 19 21:55:15.373 [Warning] Could not bind to 127.0.0.1:9050: Address already in use. Is Tor already running? Apr 19 21:55:15.373 [Warning] Failed to parse/validate config: Failed to bind one of the listener ports. Apr 19 21:55:15.373 [Error] Reading config failed--see warnings above. I don't think tor is running. Here is a nmap scan of my localhost Starting Nmap 5.21 ( http://nmap.org ) at 2011-04-19 21:59 CEST Nmap scan report for localhost (127.0.0.1) Host is up (0.0000050s latency). Hostname localhost resolves to 2 IPs. Only scanned 127.0.0.1 rDNS record for 127.0.0.1: localhost.localdomain Not shown: 989 closed ports PORT STATE SERVICE 22/tcp open ssh 53/tcp open domain 80/tcp open http 139/tcp open netbios-ssn 445/tcp open microsoft-ds 631/tcp open ipp 3128/tcp open squid-http 3306/tcp open mysql 9000/tcp open cslistener 9050/tcp open tor-socks 10000/tcp open snet-sensor-mgmt I see tor-socks is running here, probably be the cause of the problem. How do I stop this from starting up? I want to use vidalia so I can monitor whats going on.

  Read the article

• Login screen restarts while entering password

  - by Shane L

  I am having a problem that only occurred after installing the fglrx proprietary driver through the additional drivers app. The exact same issue is described in this question, however it's closed. Must login twice before entering Unity; first login screen has graphical anomalies When I boot up my computer, once I get to lightdm login screen I will start typing my password, and upon the entering of two of my password characters "n2" the screen will start displaying some corruption in the very top edge of the screen, then after I hit the number 2, lightdm seems to crash and it will restart and everything is fine, I can login from that point. So the issue is, every time I reboot, I have to login once, allow lightdm to crash and restart, then login as normal. The issue did not occur prior to installing fglrx, and has happened through several reinstalls.

  Read the article

• Can and should UDF be used as a hard drive format?

  - by dlamblin

  Several time recently I've seen UDF suggested as the solution to a cross platform format for a drive used on Linux, Mac OS X and Windows XP and above. I've searched here and not found the same suggestion (most are suggesting ntfs-3g which seems to cost money and isn't preinstalled on a Mac). So my question is: how is this done right, and has anyone done this? Have you then filled up the drive and deleted some files to make space finding that everything works like a real r/w format even though it seems to have been primarily a write once format?

  Read the article

• Script to setup Ubuntu as a wireless access point on a bridge mode

  - by nixnotwin

  I use the following script to make my netbook a full-fledged wireless access point. It creates a bridge with eth0 and wlan0 and starts hostapd. #!/bin/bash service network-manager stop ifconfig eth0 0.0.0.0 #remove IP from eth0 ifconfig eth0 up #ensure the interface is up ifconfig wlan0 0.0.0.0 #remove IP from eth1 ifconfig wlan0 up #ensure the interface is up brctl addbr br0 #create br0 node hostapd -d /etc/hostapd/hostapd.conf > /var/log/hostapd.log & sleep 5 brctl addif br0 eth0 #add eth0 to bridge br0 brctl addif br0 wlan0 #add wlan0 to bridge br0 ifconfig br0 192.168.1.15 netmask 255.255.255.0 #ip for bridge ifconfig br0 up #bring up interface route add default gw 192.168.1.1 # gateway This script works efficiently. But if I want to revert back to use Network Manager, I cannot do it. The bridge simply cannot be deleted. How can I modify this script so that if I run bridge_script --stop, the bridge gets deleted, network manager starts and interfaces behave as if the machine had a fresh reboot.

  Read the article

• How to enable wireless on my hp compaq nx6110 laptop

  - by victor

  My laptop is an old HP Compaq NX6110. The wireless switch is not working, and I can`t also enable wireless from connexion manager. I connected to to the Internet with Ubuntu using wired LAN, and I downloaded windows wireless drivers, Wi-Fi radar application, and additional drivers. I also updated to Ubuntu 11.10 but still no luck. I guess I need some terminal commands. Any ideas are welcome. Thank you for the attention victor.

  Read the article

• Cannot install vlc in ubuntu 13.10

  - by nisargshah95

  for some reasons I cannot instal VLC media player on my Ubuntu Gnome 13.10 32bit. I added the VideoLAN PPA repository and ran sudo apt-get update and sudo apt-get install vlc Here's the log - nisarg@nisarg-ThinkPad-T61:~$ sudo apt-get install vlc Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: liba52-0.7.4 libaacs0 libass4 libavcodec53 libavformat53 libavutil51 libbluray1 libcddb2 libcrystalhd3 libdc1394-22 libdca0 libdirac-encoder0 libdirectfb-1.2-9 libdvbpsi8 libdvdnav4 libdvdread4 libebml3 libfaad2 libgsm1 libiso9660-8 libkate1 libmad0 libmatroska5 libmodplug1 libmpcdec6 libmpeg2-4 libopus0 libpostproc52 libresid-builder0c2a libschroedinger-1.0-0 libsdl-image1.2 libsdl1.2debian libsidplay2 libssh2-1 libswscale2 libtar0 libts-0.0-0 libtwolame0 libupnp6 libva-x11-1 libva1 libvcdinfo0 libvlc5 libvlccore5 libwebp4 libx264-123 libxcb-composite0 libxcb-keysyms1 libxcb-randr0 libxcb-xv0 libzvbi-common libzvbi0 tsconf vlc-data vlc-nox vlc-plugin-notify vlc-plugin-pulse Suggested packages: libbluray-bdj firmware-crystalhd libdvdcss2 debhelper opus-tools videolan-doc The following NEW packages will be installed: liba52-0.7.4 libaacs0 libass4 libavcodec53 libavformat53 libavutil51 libbluray1 libcddb2 libcrystalhd3 libdc1394-22 libdca0 libdirac-encoder0 libdirectfb-1.2-9 libdvbpsi8 libdvdnav4 libdvdread4 libebml3 libfaad2 libgsm1 libiso9660-8 libkate1 libmad0 libmatroska5 libmodplug1 libmpcdec6 libmpeg2-4 libopus0 libpostproc52 libresid-builder0c2a libschroedinger-1.0-0 libsdl-image1.2 libsdl1.2debian libsidplay2 libssh2-1 libswscale2 libtar0 libts-0.0-0 libtwolame0 libupnp6 libva-x11-1 libva1 libvcdinfo0 libvlc5 libvlccore5 libwebp4 libx264-123 libxcb-composite0 libxcb-keysyms1 libxcb-randr0 libxcb-xv0 libzvbi-common libzvbi0 tsconf vlc vlc-data vlc-nox vlc-plugin-notify vlc-plugin-pulse 0 upgraded, 58 newly installed, 0 to remove and 7 not upgraded. Need to get 16.7 MB of archives. After this operation, 75.0 MB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc-data all 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [4,967 kB] Get:2 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main libvlccore5 i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [384 kB] Get:3 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main libvlc5 i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [42.4 kB] Get:4 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc-nox i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [2,084 kB] Get:5 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [1,078 kB] Get:6 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc-plugin-notify i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [5,836 B] Get:7 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc-plugin-pulse i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [18.2 kB] Err http://archive.ubuntu.com/ubuntu/ saucy/universe libaacs0 i386 0.6.0-2 Connection failed [IP: 91.189.92.176 80] 51% [Waiting for headers] Now it doesn't move forward after this point. Any suggestions?

  Read the article

• How do I report a missing package dependency during an upgrade?

  - by crasic

  A friend of mine (somewhat new to linux) recently upgraded from 10.10 to 11.04 and his OS broke from the upgrade. A few minutes of troubleshooting showed that the culprit was the PAE kernel that the upgrade decided to install since it determined he had 4GB of phyisical RAM. More specifically the upgrade forgot to install the linux-headers-generic-pae required by the closed source nvidia drivers. I'm not entirely sure how to report this bug to the devs. Its an easy fix (after booting into the non-pae kernel and installing the package everything worked), but they are encouraging users to use the built-in bug reporting system and I'm not entirely certain how to report update bugs.

  Read the article

• How do i mount my SD Card? I am using ubuntu 10.04

  - by shobhit

  root@shobhit:/media# lsusb Bus 002 Device 017: ID 14cd:125c Super Top Bus 002 Device 003: ID 0c45:6421 Microdia Bus 002 Device 002: ID 8087:0020 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 011: ID 413c:8160 Dell Computer Corp. Bus 001 Device 006: ID 413c:8162 Dell Computer Corp. Bus 001 Device 005: ID 413c:8161 Dell Computer Corp. Bus 001 Device 004: ID 138a:0008 DigitalPersona, Inc Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 002: ID 8087:0020 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@shobhit:/home/shobhit/scripts/internalUtilities# sudo lspci -v -nn 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fbc08000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at fbc07000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=20, subordinate=20, sec-latency=32 Capabilities: [50] Subsystem: Dell Device [1028:0441] 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b0b] (rev 06) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01) Subsystem: Dell Device [1028:0441] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 29 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at fbc06000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA <?> Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Dell Device [1028:0441] Flags: medium devsel, IRQ 3 Memory at fbc05000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06) Subsystem: Dell Device [1028:0441] Flags: bus master, fast devsel, latency 0, IRQ 3 Memory at fbc04000 (64-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 3 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- 12:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4727] (rev 01) Subsystem: Dell Device [1028:0010] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fbb00000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number cb-c0-8b-ff-ff-38-00-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl 13:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: Dell Device [1028:0441] Flags: bus master, fast devsel, latency 0, IRQ 28 I/O ports at e000 [size=256] Memory at d0b04000 (64-bit, prefetchable) [size=4K] Memory at d0b00000 (64-bit, prefetchable) [size=16K] Expansion ROM at fba00000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4 Capabilities: [cc] Vital Product Data <?> Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-03 Kernel driver in use: r8169 Kernel modules: r8169 root@shobhit:/home/shobhit/scripts/internalUtilities# sudo lshw shobhit description: Portable Computer product: Vostro 3500 vendor: Dell Inc. version: A10 serial: FV1L3N1 width: 32 bits capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp configuration: boot=normal chassis=portable cpus=2 uuid=44454C4C-5600-1031-804C-C6C04F334E31 *-core description: Motherboard product: 0G2R51 vendor: Dell Inc. physical id: 0 version: A10 serial: .FV1L3N1.CN7016612H00PW. slot: To Be Filled By O.E.M. *-cpu:0 description: CPU product: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.5.5 serial: 0002-0655-0000-0000-0000-0000 slot: CPU 1 size: 1197MHz capacity: 2926MHz width: 64 bits clock: 533MHz capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida arat tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: id=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 3MiB capacity: 3MiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 4.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 4.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 4.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 4.4 width: 64 bits capabilities: logical *-logicalcpu:4 description: Logical CPU physical id: 4.5 width: 64 bits capabilities: logical *-logicalcpu:5 description: Logical CPU physical id: 4.6 width: 64 bits capabilities: logical *-logicalcpu:6 description: Logical CPU physical id: 4.7 width: 64 bits capabilities: logical *-logicalcpu:7 description: Logical CPU physical id: 4.8 width: 64 bits capabilities: logical *-logicalcpu:8 description: Logical CPU physical id: 4.9 width: 64 bits capabilities: logical *-logicalcpu:9 description: Logical CPU physical id: 4.a width: 64 bits capabilities: logical *-logicalcpu:10 description: Logical CPU physical id: 4.b width: 64 bits capabilities: logical *-logicalcpu:11 description: Logical CPU physical id: 4.c width: 64 bits capabilities: logical *-logicalcpu:12 description: Logical CPU physical id: 4.d width: 64 bits capabilities: logical *-logicalcpu:13 description: Logical CPU physical id: 4.e width: 64 bits capabilities: logical *-logicalcpu:14 description: Logical CPU physical id: 4.f width: 64 bits capabilities: logical *-logicalcpu:15 description: Logical CPU physical id: 4.10 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 1d slot: System board or motherboard size: 3GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: HMT112S6TFR8C-H9 vendor: AD80 physical id: 0 serial: 5525C935 slot: DIMM_A size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: HMT125S6TFR8C-H9 vendor: AD80 physical id: 1 serial: 3441D6CA slot: DIMM_B size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A10 (10/25/2010) size: 64KiB capacity: 1984KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.5.5 serial: 0002-0655-0000-0000-0000-0000 size: 1197MHz capacity: 1197MHz capabilities: vmx ht cpufreq configuration: id=4 *-logicalcpu:0 description: Logical CPU physical id: 4.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 4.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 4.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 4.4 capabilities: logical *-logicalcpu:4 description: Logical CPU physical id: 4.5 capabilities: logical *-logicalcpu:5 description: Logical CPU physical id: 4.6 capabilities: logical *-logicalcpu:6 description: Logical CPU physical id: 4.7 capabilities: logical *-logicalcpu:7 description: Logical CPU physical id: 4.8 capabilities: logical *-logicalcpu:8 description: Logical CPU physical id: 4.9 capabilities: logical *-logicalcpu:9 description: Logical CPU physical id: 4.a capabilities: logical *-logicalcpu:10 description: Logical CPU physical id: 4.b capabilities: logical *-logicalcpu:11 description: Logical CPU physical id: 4.c capabilities: logical *-logicalcpu:12 description: Logical CPU physical id: 4.d capabilities: logical *-logicalcpu:13 description: Logical CPU physical id: 4.e capabilities: logical *-logicalcpu:14 description: Logical CPU physical id: 4.f capabilities: logical *-logicalcpu:15 description: Logical CPU physical id: 4.10 capabilities: logical *-pci description: Host bridge product: Core Processor DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 18 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: msi pm bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:30 memory:fac00000-faffffff memory:c0000000-cfffffff(prefetchable) ioport:f080(size=8) *-communication UNCLAIMED description: Communication controller product: 5 Series/3400 Series Chipset HECI Controller vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: latency=0 resources: memory:fbc09000-fbc0900f *-usb:0 description: USB Controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 06 width: 32 bits clock: 33MHz capabilities: pm debug bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fbc08000-fbc083ff *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:22 memory:fbc00000-fbc03fff *-pci:0 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:24 ioport:2000(size=4096) memory:bc000000-bc1fffff memory:bc200000-bc3fffff(prefetchable) *-pci:1 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:25 ioport:3000(size=4096) memory:fbb00000-fbbfffff memory:bc400000-bc5fffff(prefetchable) *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:8b:aa:d8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=10.0.1.50 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbb00000-fbb03fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:26 ioport:e000(size=4096) memory:fba00000-fbafffff ioport:d0b00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 03 serial: 78:2b:cb:cc:0e:2a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:28 ioport:e000(size=256) memory:d0b04000-d0b04fff(prefetchable) memory:d0b00000-d0b03fff(prefetchable) memory:fba00000-fba1ffff(prefetchable) *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:27 ioport:d000(size=4096) memory:fb000000-fb9fffff ioport:d0000000(size=10485760) *-usb:1 description: USB Controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 06 width: 32 bits clock: 33MHz capabilities: pm debug bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fbc07000-fbc073ff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a6 width: 32 bits clock: 33MHz capabilities: pci bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 06 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 5 Series/3400 Series Chipset 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 06 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:29 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fbc06000-fbc067ff *-disk description: ATA Disk product: WDC WD3200BEKT-7 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21AC0W1945 size: 298GiB (320GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=77e3ed41 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: aa69-51c0 size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-04-03 02:00:15 filesystem=ntfs label=System Reserved state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 9854ff5c-1dea-a147-84a6-624e758f44b8 size: 48GiB capacity: 48GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2012-04-10 13:55:31 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-volume:2 description: Extended partition physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 size: 48GiB capacity: 48GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 1952MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered state=mounted *-volume:3 description: Windows NTFS volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 logical name: /media/56AA8094AA807273 version: 3.1 serial: 22a29e8d-56c7-9a4a-adea-528103948f6d size: 200GiB capacity: 200GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2012-04-02 20:17:15 filesystem=ntfs modified_by_chkdsk=true mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 mounted_on_nt4=true resize_log_file=true state=mounted upgrade_on_mount=true *-cdrom description: DVD-RAM writer product: DVD+-RW TS-L633J vendor: TSSTcorp physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: D200 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 06 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fbc05000-fbc050ff ioport:f000(size=32) *-generic UNCLAIMED description: Signal processing controller product: 5 Series/3400 Series Chipset Thermal Subsystem vendor: Intel Corporation physical id: 1f.6 bus info: pci@0000:00:1f.6 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: latency=0 resources: memory:fbc04000-fbc04fff *-scsi physical id: 2 bus info: usb@2:1.1 logical name: scsi15 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@15:0.0.0 logical name: /dev/sdb I have tried all options like fdisk /dev/sdb , pmount /dev/sdb but nothing is working .Pls guide me

  Read the article

• Do dconf use EXI binary XML?

  - by Hibou57

  A question came to my mind reading an answer to the question What are the differences between gconf and dconf?. In an reply to the above question, Oli said: Binary read access is far faster than parsing XML. However, there exist a W3C recommendation for binary XML, since 2010: Efficient XML Interchange (EXI) Format 1.0. Is this what dconf uses? If Yes, where is it confirmed? If No, was there some investigations toward it at some time, and what was the conclusions? Thanks for any tracks, I'm curious to know.

  Read the article

• Dual Screen will only mirror after 12.04 upgrade

  - by Ne0

  I have been using Ubuntu with a dual screen for years now, after upgrading to 12.04 LTS i cannot get my dual screen working properly Graphics: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] (Secondary) I noticed i was using open source drivers and attempted to install official binaries using the methods in this thread. Output: liam@liam-desktop:~$ sudo apt-get install fglrx fglrx-amdcccle Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: fglrx fglrx-amdcccle 2 upgraded, 0 newly installed, 0 to remove and 12 not upgraded. Need to get 45.1 MB of archives. After this operation, 739 kB of additional disk space will be used. Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx i386 2:8.960-0ubuntu1 [39.2 MB] Get:2 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx-amdcccle i386 2:8.960-0ubuntu1 [5,883 kB] Fetched 45.1 MB in 1min 33s (484 kB/s) (Reading database ... 328081 files and directories currently installed.) Preparing to replace fglrx 2:8.951-0ubuntu1 (using .../fglrx_2%3a8.960-0ubuntu1_i386.deb) ... Removing all DKMS Modules Error! There are no instances of module: fglrx 8.951 located in the DKMS tree. Done. Unpacking replacement fglrx ... Preparing to replace fglrx-amdcccle 2:8.951-0ubuntu1 (using .../fglrx-amdcccle_2%3a8.960-0ubuntu1_i386.deb) ... Unpacking replacement fglrx-amdcccle ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Setting up fglrx (2:8.960-0ubuntu1) ... update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-initramfs: deferring update (trigger activated) update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Loading new fglrx-8.960 DKMS files... Building only for 3.2.0-25-generic-pae Building for architecture i686 Building initial module for 3.2.0-25-generic-pae Done. fglrx: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-25-generic-pae/updates/dkms/ depmod....... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle (2:8.960-0ubuntu1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place liam@liam-desktop:~$ sudo aticonfig --initial -f aticonfig: No supported adapters detected When i attempt to get my settings back to what they were before upgrading i get this message requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) and GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) Any idea's on what i need to do to fix this issue?

  Read the article

• SSD temperature sensor readout with hddtemp

  - by Dande Un

  It seems hddtemp cannot detect the temperature sensor of my SSD (Samsung EVO 840) properly.This is the bash output when running hddtemp: WARNUNG: Laufwerk /dev/sda scheint keinen Temperatur-Sensor zu haben. WARNUNG: Das bedeutet nicht, dass es keinen besitzt. WARNUNG: Falls Sie sicher sind, dass es einen besitzt, kontaktieren Sie mich bitte ([email protected]). WARNUNG: Siehe Optionen --help, --debug und --drivebase. /dev/sda: Samsung SSD 840 EVO 120G B ?@: kein Sensor I looked in the most recent .db file posted on http://nongnu.mirrors.hostinginnederland.nl//hddtemp/hddtemp.db, but it doesn't seem to list any SSD drives at all. Was anyone able to readout the temp-sensor of a SSD with hddtemp?

  Read the article

• Internet suddenly stopped working

  - by user95629

  I was using NoMachine to access Ubuntu 11.10 when suddenly the internet on Ubuntu stopped working. Now Ubuntu doesn't recognize the internet at all (including locally). Symptoms: Doesn't recognize the fact that there is an ethernet cable attached. (I've tried switching cables, didn't work.) GUI says "No network devices available" Can't ping external IP addresses. Tried changing /etc/network/interfaces to eth1 instead of eth0 but it didn't work. ifconfig provides no output relating to eth0. When I type "/etc/init.d/networking restart" it tells me "Cannot find device 'eth0'/Failed to bring up eth0." The network settings had used a static IP address prior to the crash. I don't know why it won't recognize the ethernet (I think this is the fundamental problem, but I might be wrong) and why it stopped working so suddenly--I haven't installed any updates lately. Any ideas? Any more information I should provide? EDIT: lspci recognizes the Ethernet controller; netstat does not. lspci calls it "Intel Corporation Device 0000"

  Read the article

• Cannot right click with synaptics touchpad

  - by fluteflute

  I have a Sony VAIO E14. The touchpad detects all clicks as Left clicks. In Windows 7, pressing on the right side of the touchpad is recognised as a right click. How can I enable right clicking? greg@greg-SVE14A1C5E:~$ xinput ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? SynPS/2 Synaptics TouchPad id=11 [slave pointer (2)] ... greg@greg-SVE14A1C5E:~$ grep "TouchPad: buttons:" /var/log/Xorg.0.log [ 23.112] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple

  Read the article

• install AMD Driver on HP Pavilion dv6-6051er on ubuntu 13.10 amd64

  - by user1685095

  So... I've tried to follow this instructions After running sudo dpkg -i fglrx*.deb I got a bunch of errors about missing packages, so I've star?d to install them one by one and stuck on this one. Unpacking fglrx-dev (from fglrx-dev_12.104-0ubuntu1_amd64.deb) ... dpkg: dependency problems prevent configuration of fglrx: fglrx depends on lib32gcc1; however: Package lib32gcc1 is not installed. fglrx depends on dkms; however: Package dkms is not installed. dpkg: error processing fglrx (--install): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--install): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--install): dependency problems - leaving unconfigured Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Errors were encountered while processing: fglrx fglrx-amdcccle fglrx-dev sudo apt-get install lib32gcc1 Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: fglrx : Depends: dkms but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). So, what sould I do next to install this drivers?

  Read the article

• How do I make changes to /proc/acpi/wakeup permanent?

  - by Jolan

  I had a problem with my Ubuntu 12.04 waking up immediately after going into suspend. I solved the problem by changing the settings in /proc/acpi/wakeup, as suggested in this question: How do I prevent immediate wake up from suspend?. After changing the settings, the system goes flawlessly into suspend and stays suspended, but after I wake it back up, the settings in /proc/acpi/wakeup are different from what I set them to. Before going to suspend: cat /proc/acpi/wakeup Device S-state Status Sysfs node SMB0 S4 *disabled pci:0000:00:03.2 PBB0 S4 *disabled pci:0000:00:09.0 HDAC S4 *disabled pci:0000:00:08.0 XVR0 S4 *disabled pci:0000:00:0c.0 XVR1 S4 *disabled P0P5 S4 *disabled P0P6 S4 *disabled pci:0000:00:15.0 GLAN S4 *enabled pci:0000:03:00.0 P0P7 S4 *disabled pci:0000:00:16.0 P0P8 S4 *disabled P0P9 S4 *disabled USB0 S3 *disabled pci:0000:00:04.0 USB2 S3 *disabled pci:0000:00:04.1 US15 S3 *disabled pci:0000:00:06.0 US12 S3 *disabled pci:0000:00:06.1 PWRB S4 *enabled SLPB S4 *enabled I tell the system to suspend, and it works as it should. But later after waking it up, the settings are changed to either: USB0 S3 *disabled pci:0000:00:04.0 USB2 S3 *enabled pci:0000:00:04.1 US15 S3 *disabled pci:0000:00:06.0 US12 S3 *enabled pci:0000:00:06.1 or USB0 S3 *enabled pci:0000:00:04.0 USB2 S3 *enabled pci:0000:00:04.1 US15 S3 *enabled pci:0000:00:06.0 US12 S3 *enabled pci:0000:00:06.1 Any ideas? Thank you for your response. Unfortunately it did not solve my problem. all of /sys/bus/usb/devices/usb1/power/wakeup /sys/bus/usb/devices/usb2/power/wakeup /sys/bus/usb/devices/usb3/power/wakeup /sys/bus/usb/devices/usb4/power/wakeup as well as /sys/bus/usb/devices/3-1/power/wakeup are set to disabled, and the notebook still wakes up by itself right after going to sleep. The only thing it seems to react to are the settings in /proc/acpi/wakeup, which keep changing (resetting) every time i power off/restart my notebook.

  Read the article

• Unable to delete file from read-only file system

  - by tech

  I cannot delete files, when I tried to delete the file, this message appeard: "Error while deleting. There was an error deleting file2.rar." This is what I get from clicking on SHOW MORE DETAILS: "Error removing file: Read-only file system" This is what I've tried so far: delete from the downloads directory from my user. deleting permanently, but it does not work. EDIT When trying to remount it as read/write I get this error: jianyue@jianyue:~$ sudo mount -o remount,rw /media/A88F-8788 [sudo] password for jianyue: sudo: unable to open /var/lib/sudo/jianyue/1: Read-only file system mount: can't find /media/A88F-8788 in /etc/fstab or /etc/mtab

  Read the article

• can't install with usb pen drive, SYSLINUX problem

  - by nkint

  i'm on ubuntustudio and i want to format my hd and try kubuntu (install in my acer notebook, no partion, no double operating system problem, only istall it) i've downloaded iso file ( kubuntu-10.10-desktop-i386.iso ), insert usb pen drive, then: system administration startup disk creator erased usb pen content, and "make startup disk" finally, reboot computer with pen inside usb port normal boot didn't start (as expected) but only black screen with this signal: SYSLINUX 4.03 2010-10-22 EDD Copyright (c) 1994-2010, H. Peter Anvin et al unknown keyword in configuration file boot: i've tried different usb pen stick and different iso files (ubuntu, kubuntu, netbook edition).. always same problem (sometimes only the first line without "unknow keyword in conf file" error) some advice?? sorry for my bad english

  Read the article

• Can't boot 12.04 installed alongside Windows 7

  - by PalaceChan

  I realize there are other questions like this one here, but I have visited them and tried several things and nothing is helping. One of them had a suggestion to boot the liveCD, and sudo mount /dev/sda* /mnt and to then chroot and reinstall grub. I did this and it did not help. Then on the Windows side, I downloaded a free version of easyBCD and chose to add a Grub2 Ubuntu 12.04 entry. On restart I saw this entry, but when I click on it it takes me to a Windows failed to boot error, as if it wasn't even trying to boot Ubuntu. I have booted from Ubuntu liveCD once again and have a snapshot of my GParted I ran this bootinfoscript thing from the liveCD, here are my results: It seems grub is on sda. I just want to be able to boot into my Ubuntu on startup. Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1041658947 of the same hard drive for core.img. core.img is at this location and looks for (,gpt7)/boot/grub on this drive. sda1: __________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/Boot/bootx64.efi sda2: __________________________________________ File system: Boot sector type: - Boot sector info: Mounting failed: mount: unknown filesystem type '' sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda4: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda5: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /boot/bcd sda6: __________________________________________ File system: BIOS Boot partition Boot sector type: Grub2's core.img Boot sector info: sda7: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda7 and looks at sector 1046637581 of the same hard drive for core.img. core.img is at this location and looks for (,gpt7)/boot/grub on this drive. Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda8: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sda1 2,048 411,647 409,600 EFI System partition /dev/sda2 411,648 673,791 262,144 Microsoft Reserved Partition (Windows) /dev/sda3 673,792 533,630,975 532,957,184 Data partition (Windows/Linux) /dev/sda4 533,630,976 1,041,658,946 508,027,971 Data partition (Windows/Linux) /dev/sda5 1,412,718,592 1,465,147,391 52,428,800 Windows Recovery Environment (Windows) /dev/sda6 1,041,658,947 1,041,660,900 1,954 BIOS Boot partition /dev/sda7 1,041,660,901 1,396,174,572 354,513,672 Data partition (Windows/Linux) /dev/sda8 1,396,174,573 1,412,718,591 16,544,019 Swap partition (Linux) blkid output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 B498-319E vfat SYSTEM /dev/sda3 820C0DA30C0D92F9 ntfs OS /dev/sda4 168410AB84108EFD ntfs DATA /dev/sda5 AC7A43BA7A438056 ntfs Recovery /dev/sda7 42a5b598-4d8b-471b-987c-5ce8a0ce89a1 ext4 /dev/sda8 5732f1c7-fa51-45c3-96a4-7af3bff13278 swap /dev/sr0 iso9660 Ubuntu 12.04 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda7/boot/grub/grub.cfg: =========================== How can I get this option? When I was using easyBCD, it kept saying I had no entries at all, so I did the add entry thing for Ubuntu many times and I see several of those on boot screen now. I'd love to get rid of all those unusable options.

  Read the article

• Set up a GUI managed stateful filtering firewall?

  - by Azendale

  What ways are there of setting up a stateful filtering* firewall whose rules can be managed by a GUI? Can GUFW do it? FireStarter? (or should that be avoided because it is supposedly no longer updated?) *By filtering, I'm mean the traffic I am setting rules up for is not destined for this computer. It is either from or to other computers on my LAN. Say, for (a simplified, hypothetical) example: I have an ethernet connection at my dorm that I have plugged into eth0. It gets an address of 192.168.1.185 and I also have 192.168.185.0/24 routed to me, so I don't have to do any NAT. I have a hub attached to my second ethernet port (eth1) with a few Windows computers and I give addresses out of my 192.168.185.0/24 block with DHCP. How can I use my Ubuntu box to block incoming connections from eth0 that are being routed to my Windows computers and let through just a few specific ports (so fellow students can't see what files my Windows boxes are sharing via SMB)?

  Read the article

• How do I know I'm using kubuntu?

  - by Adobe

  I installed Kubuntu image long time ago, and did several release upgrades since that. I have package kubuntu-full installed, and boot into KDE. Currently it looks like I'm using ubuntu: ~: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.10 Release: 13.10 Codename: saucy There's not a single kubuntu word in my /etc/apt/sources.list, or is it Kubuntu = Ubuntu - Unity + KDE now? For example there's a Pre-Alpha Ubuntu Thar already, but no Kubuntu one. Would I get Kubuntu Thar, by installing Ubuntu Thar in the way mentioned above? Probably Kubuntu team now are the guys responsible for KDE working in Ubuntu.

  Read the article

• disable all hotkeys with dconf-editor

  - by Gijs

  I'm building a deb package that will create a kiosk user account. When you login to this account, the browser automatically starts and navigates to a pre-given website. Also all the hotkeys should be disabled except for one you defined. Now I'm at the part that the browser starts and my disable script is excecuted on logon but for exaple, I can still close the browser with Alt + F4. And when i check the dconf-editor for the hotkeys, for every single one the bind is deleted, but mine for close isn't added. Like you can see in the printscreen. I disabled all these keys with this code, one line for evere hotkey gsettings set org.gnome.desktop.wm.keybindings begin-resize [] So this seams to work, but at the bottom of my disable script this line should be executed. gsettings set org.gnome.desktop.wm.keybindings close ['<Alt>b'] Does anyone know why i'm able to unbind all these hotkeys in my dconf-editor but they are able to still do their job? And when it is possible to unbind them, why cant I bind mine? I searched the web for a solution but couldn't find one fitting my needs, I hope some of you know the answer to this. Regards Gijs

  Read the article

• Port listening on localhost:8000 but not on ip:8000

  - by Marionette

  Hello I'm running a web application on port 8000. When I access it from the host server localhost:8000 it responds ok, 127.0.0.1:8000 also works, but 192.168.1.7:8000 does not work. 192.168.1.7 is the ip of my server. Also if i try to go to another web application running on port 80 it works 192.168.1.7 I enabled ufw firewall and set ufw default allow. I am using ubuntu server 12.04 Any suggestions on why I can't get to my app on port 8000 using the ip-address:8000? Thanks in advance!

  Read the article

• How backup and restore Horde manualy

  - by Thomas

  how can I backup and restore my horde sql database The Databse ist located in /var/lib/mysql/horde There are many *.frm files and one db.opt My Server ist broken, so I want to reinstall it. Can i copy this files to a USB Stick, then restore the entire server without horde and then simply copy the files in the same directory? Or habe I do something like "mysqldump" to delete an reinztall the database? Thank you, Thomas

  Read the article

• How can a gamepad control THE mouse?

  - by Boris

  There are many questions about this subject: Remapping both mouse and keyboard to a gamepad How do I configure a joystick or gamepad? How to control the mouse pointer via my keyboard? ... But the purpose of these questions/answers is to be able to use the gamepad for playing a game. I would a like a solution to use the gamepad to control THE mouse. To replace the mouse by the gamepad in all applications. That way I could control my computer in the living-room from my couch with a wireless gamepad.

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >