Search Results

Search found 13904 results on 557 pages for 'host on demand'.

Page 92/557 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Windows Server 2012 Hyper-V very slow

  - by Matt Taylor

  I have been running several Hyper-V VMs on Windows Server 2008 R2 for the past couple of years and enjoying perfectly adequate performance for my testing/development/r&d environments. I'm a software developer so my hardware knowledge is basic however I built the rig using: •Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Motherboard •Intel Core i7 960 3.20GHz (Bloomfield) (Socket LGA1366) •24GB triple channel RAM The host OS is running on an OCZ SSD and all the VMs are running on a 2TB Marvell SATA3 RAID 0 array consisting of 2 Western Digital Caviar Black 7,200rpm drives. I have tested the speed of the 2TB drive and appear to be getting less than 3Mbs but it can adequately run a 4 VM farm including a DC, (SQL) database and IIS application servers. I recently upgraded the SSD on which the host runs to a 256GB OCZ Vertex 4 and took the opportunity to upgrade to Windows Server 2012 and installed the Hyper-V role. I tried importing one of my existing Windows Server 2008 R2 VMs (and converted it to .vhdx) plus I have tried creating a brand new Windows Server 2008 R2 VM but both are running extremely slowly and I can see nothing obvious using the host and guest Task Manager/Resource Monitor tools. In both cases the VM has 8GB RAM (fixed), 4 CPUs, fixed size HD (not expanding) and is using an external virtual network running on a separate NIC to the host. I have upgraded the BIOS to the latest available version and checked the virtualization settings. I have run out of "obvious" (to a developer) things to check/configure and my next option will be to re-install the host OS but before I do I would very much appreciate any advice from any experts out there. Thanks

  Read the article

• unable to access a NAT'ed IP via a VPN on Windows 7

  - by crmpicco

  I connect to a range of servers hosted by one provider via a VPN. I can connect to the VPN fine, however when I then go and try and connect to the server(s) it fails. A NAT'ed IP address that has worked up until today, has stopped working either via SSH/SFTP. As you can see below, if I try and ping the IP then it responds with Destination host unreachable, but, for some reason it says the reply is from 192.168.0.8? If it enter this IP address in my browser, I get nothing. Where is this IP coming from and is there any good reason why I cannot access the IP I am trying to ping? C:\Users\crmpicco>ping 172.26.100.x Pinging 172.26.100.x with 32 bytes of data: Reply from 192.168.0.8: Destination host unreachable. Reply from 192.168.0.8: Destination host unreachable. Reply from 192.168.0.8: Destination host unreachable. Reply from 192.168.0.8: Destination host unreachable. Ping statistics for 172.26.100.x: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), I have the VPN remote host address of 80.75.67.x, which shows me as being connected. But i'm unsure if there is a config issue at the server side or my end that has caused this issue? I have had some recent Win7 (automatic) updates, but it's hard to tell if that's caused this problem. This is my output from arp: C:\Users\cmorton>arp -a Interface: 192.168.0.8 --- 0xe Internet Address Physical Address Type 192.168.0.1 00-18-4d-b9-68-5e dynami 192.168.0.6 00-f4-b9-68-0c-9a dynami 192.168.0.7 08-00-27-f2-9f-d6 dynami 192.168.0.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.251 01-00-5e-00-00-fb static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 192.168.56.1 --- 0x15 Internet Address Physical Address Type 192.168.56.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.251 01-00-5e-00-00-fb static 224.0.0.252 01-00-5e-00-00-fc static 255.255.255.255 ff-ff-ff-ff-ff-ff static

  Read the article

• In Zabbix how to separate data of the same type but from different sources?

  - by Jader Dias

  I have a machine that receives data from multiple sources. This machine forwards the data to the Zabbix Trapper. I want to be able to view this data separately. One way of doing that is to send data from each source with a different fake hostname. But this is not ideal. I can receive this data in more than one host. I would like to be able to see data from source 1 on host A separately from source 2 on host A and from source 1 in host B. Also posted on: http://www.zabbix.com/forum/showthread.php?t=16503

  Read the article

• How to configure nagios realtime SMS alert

  - by Jerry

  I have configured nagios SMS alert and it takes around one minute to send notification. I want to get SMS notification withing one/two second(s) after system/service failure. I could not find any way to send sms alert in a second. Can anybody help me??? Update Wednesday, 29 August 9:26:43 a.m GMT define host{ use generic-host ; Name of host template to use host_name localhost alias localhost address x.x.x.187 check_command check-host-alive normal_check_interval 1 max_check_attempts 1 retry_interval 1 notification_interval 120 notification_period 24x7 notification_options d,r contact_groups admins }

  Read the article

• How to best migrate one Windows 2008 R2 / SharePoint / Exchange / Terminal Services (All-in-one) int

  - by MadBoy

  Hello, My client has one machine with Windows 2008 R2 and everything on it. By everything I mean AD, DNS, SharePoint 2010 Standard, Exchange 2010 Standard, Terminal Services, Office 2010 and a bunch of additional apps. Everything stands on I7 x 2 and 36gb ram for 7 people total. I've decided that we should virtualize it and split things into 4 VM's and keep host only with Hyper-V installed to host all the machines. What problems should I expect? What good advices can you give. My plan is that when i move everything to VM's i will move vm's to safe place and format the host as it has a lot of really bad things happening on it. But this also means that everything will be wiped from current solution so I have to be sure that Exchange etc will work when host gets wiped. MadBoy

  Read the article

• Exchange Server 2010 ActiveSync SSL Certificate Problem

  - by Cell-o

  Hi All, We have a problem related Exchange Server 2010 Activesync.My problem is;When I connecting to activesync from outside, I am receiving the following error. ExRCA is testing Exchange ActiveSync. The Exchange ActiveSync test failed. Test Steps Attempting to resolve the host name mail.xxxxx.com in DNS. The host name resolved successfully. Additional Details IP addresses returned: xx.0.x3.4 Testing TCP port 443 on host mail.x.com to ensure it's listening and open. The port was opened successfully. Testing the SSL certificate to make sure it's valid. The SSL certificate failed one or more certificate validation checks. Test Steps Validating the certificate name. Certificate name validation failed. Tell me more about this issue and how to resolve it Additional Details Host name mail.x.com doesn't match any name found on the server certificate CN=xxxxxx. Thanks in advance all your help.

  Read the article

• Is it possible to run vim in remote mode on another machine?

  - by Leonid Shevtsov

  Hi, I run an Ubuntu server virtualbox under a Windows host for web development. At the moment I do all editing in Vim running inside PuTTY. It runs pretty well, but lacks some useful features like native copypasting from the host. I know about the remote mode of Vim, but afaik it can only operate on the same machine. Question is, is it possible to make gVim on the windows host proxy all the commands (and the editing) to a Vim instance running on the Linux guest?

  Read the article

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• download/export emails from webmail

  - by misterjinx

  hello, I'm just switching my hosts and I want to move the emails from my accounts too. In order to have my current emails on the new host I want to download/export them and to import at the other host. In order to do this I use one of the webmail (squirrelmail, roundcube, horde) clients available on my current host. The problem is that except for roundcube, I don't see any download/export option available. And in roundcube I can only select one email at a time and download it as eml. My question is how do I export/download all the emails from one account and import them at the new host? I know this is possible because I remember doing this some time ago using squirrelmail, but I can't find anything related to this now. Thank you.

  Read the article

• Import Firefox passwords into KeePassX or KeePass2

  - by rubo77

  I have an XML export of my Firefox Passwords in the form (I replaced real passwords with *): <xml> <entries ext="Password Exporter" extxmlversion="1.1" type="saved" encrypt="false"> <entry host="chrome://weave" user="****" password="****" formSubmitURL="" httpRealm="Mozilla Services Password" userFieldName="" passFieldName=""/> <entry host="chrome://weave" user="****" password="****" formSubmitURL="" httpRealm="Mozilla Services Encryption Passphrase" userFieldName="" passFieldName=""/> <entry host="http://www.example.de" user="rubo77" password="****" formSubmitURL="http://www.example.de" httpRealm="" userFieldName="benutzername" passFieldName="passwort"/> <entry host="http://example2.de" user="qqq" password="pppp" formSubmitURL="http://example2.de" httpRealm="" userFieldName="username" passFieldName="pass"/> ... Can I somehow convert this into a form KeePassX understands?

  Read the article

• Using wget to recursively download whole FTP directories

  - by user9406

  I want to copy all of the files and folders from one host to another. The files on the old host sit at /var/www/html and I only have FTP access to that server, and I can't TAR all the files. Regular connection to the old host through FTP brings me to the /home/admin folder. I tried running the following command form my new server: wget -r ftp://username:[email protected].host But all I get is a made up index.html file. What the right syntax for using wget recursively over FTP?

  Read the article

• Can a non domain server obtain it's updates from a domain WSUS

  - by NickC

  Anyone know if it is possible to get a non-domain Server to pick-up it's updates from a domain included WSUS server? Just thinking about Hyper-V host Servers, in a single server environment clearly this cannot be part of the domain because at the time the VM Host boots the Domain Controllers is not available. However is there any way to make this Hyper-V Host collect it's updates from the WSUS server.

  Read the article

• Reverse proxy for a subdirectory in nginx

  - by Maple

  I want to set up a Reverse proxy on my VPS for my Heroku app (http://lovemaple.heroku.com) So if I visit mysite.com/blog I can get the content in http://lovemaple.heroku.com I followed the instructions on the Apache wiki. location /couchdb { rewrite /couchdb/(.*) /$1 break; proxy_pass http://localhost:5984; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } I changed it to fit my situation: location /blog { rewrite /blog/(.*) /$1 break; proxy_pass http://lovemaple.heroku.com; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } When I visit mysite.com/blog, the page show up, but js/css file cannot be gotten (404). Their link becomes mysite.com/style.css but not mysite.com/blog/style.css. What's wrong and how can I fix it?

  Read the article

• Sharing printer form win 7 to xp in virtualbox

  - by Null

  Using virtualbox (win7 host, winXP guest) and a bluetooth printer (a portable one) I've set up printer sharing on host and can print from guest. But when the host isn't connected to the internet printing stops working. I'm using bridged adapter in virtualbox.

  Read the article

• VM can't connect to outside in bridged mode

  - by Kamal

  Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have.

  Read the article

• error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7]

  - by brazorf

  This error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] error is happening after i changed router. Actually, i found out that this error just happens on a ctrl+c signal, so it could be not representative about the error itself. The command i run is very basic: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory Basically, the rsync just stuck there and nothing's happening, until i ctrl+c. After interrupting the process i got the error in subject. I past the whole thing here: rsync -avvvvz --delete /source/path/ username@host:/path/to/direectory cmd=<NULL> machine=HOSTNAME user=username path=/path/to/direectory cmd[0]=ssh cmd[1]=-l cmd[2]=username cmd[3]=HOSTNAME cmd[4]=rsync cmd[5]=--server cmd[6]=-vvvvlogDtprze.iLsf cmd[7]=--delete cmd[8]=. cmd[9]=/path/to/direectory opening connection using: ssh -l username HOSTNAME rsync --server -vvvvlogDtprze.iLsf --delete . /path/to/direectory note: iconv_open("UTF-8", "UTF-8") succeeded. ^C[sender] _exit_cleanup(code=20, file=rsync.c, line=541): entered rsync error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] [sender] _exit_cleanup(code=20, file=rsync.c, line=541): about to call exit(130) The authentication runs on ssh via rsa key. I tried basic troubleshoot such as: ping the remote host ssh -l username remote.host check software firewall logs i asked the remote host sysadmin to check for logs, and when i run that command a ssh connection is actually being established and i can state there is no comunication/authentication/name resolution issue here. Rolling back to old router make this work again. Both client and server are running ubuntu 10.04. Try to take a look at my router configuration, where i'm no experienced at all, but i didnt see any "suspect" (what i was looking for is firewall blocking something) setting. The router itself is DLINK DVA-G3670B. Any suggestion? Thank You F.

  Read the article

• Reverse proxy using hop and RDP

  - by Sergei

  I am trying to connect from Vista to XP using RDP via reverse proxy using putty and an intermidiate host. There are myriad articles on the internet how to do it using vnc, ssh servers, winsshd, etc, but I can't find anything that helps me in this specific case. What I have: Windows XP host behind the firewall - 'destination' linux host running ssh on the internet - 'intermediate' windows host behind the firewall - 'source' All I want to do is open reverse tunnel from destination to intermidiate and use this tunnel for connecting back from the source. That should be simple to setup, however I just cannot make it. This is what I do: On 'destination', open putty session, create tunnel to 'intermediate' using following settings: source port 3389, destination is 'source:33389', direction is local On 'source', open putty session, create tunnel to 'intermediate'using following settings: source port 33389, destination is 'destination:33389', direction is local Finally, on source, open termnal services client and connect it to localhost:33389.Unfortunately it seems like packets do go somewhere but eventually client times out. Am I totally misunderstanding the concept? Please help!

  Read the article

• Installing 64-bit Ubuntu Server 12.04 LTS, on a VM with VMWare Player, on a 64-bit Windows 7 PC

  - by WannaBeAGeek

  I'm trying to create a VM, using VMWare Player, with an ISO image of Ubuntu Server 12.04 (LTS). The machine I'm doing the installation on has an Intel(R) Core(TM) i5 CPU, and runs 64-bit Windows 7 I managed to create the VM (gave username, password, configured network etc), but I can't install Ubuntu Server. First I get this alert : Binary translation is incompatible with long mode on this platform. Disabling long mode. Without long mode support, the virtual machine will not be able to run 64-bit code. For more details see http://vmware.com/info?id=152. When I click OK, I get another alert : This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host supports Intel VT-x, but Intel VT-x is disabled. Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. (1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.' (2) Power-cycle the host if either of these BIOS/firmware settings have been changed. (3) Power-cycle the host if you have not done so since installing VMware Player. (4) Update the host's BIOS/firmware to the latest version. For more detailed information, see http://vmware.com/info?id=152. Then, when I click OK, my VM exists, and I get back to the VMWare Player home screen. I don't know much about hardware and virtualisation, so there might be some necessary info I'm not giving. Please don't hesitate to let me know what is missing in my post, for finding solutions. Thanks :)

  Read the article

• Use windows 7 inside virtual box,as guest i mean, to create a Windows 7 USB using "Windows 7 USB/DVD Download Tool" ? (Linux as host)

  - by Abel Coto

  I want to download the Windows 7 professional iso (x32), from microsoft, and , i can do two things. Or buy a new burner , as mine doesn't work (i am trying to decide what dvd writer i could buy) or use a usb dongle to copy the iso to it , and install it via usb. I want to install Windows 7 in a netbook that now has debian,and in my pc. I think i have to buy only the license for the pc , as the netbook came with windows 7 preinstalled, so i suppose that i can use that serial to activate the windows , although i don't know how to install windows 7 starter instead of professional (i think if you remove a file from the iso, windows let you choose the edition to install). The problem is that in both pcs there isn't any windows , only debian. My father has a netbook with windows 7 starter, but i think it hasn't antivirus (at least until have the Karspersky Internet security for 3 pcs bought ), and i don't trust to make the usb there , if i don't now that there isn't any virus or malware. So i am trying to find a way of Create a Windows 7 usb installation , to at least be able to install windows 7 in the netbook without a external dvd writer. I know that with dd in linux you can copy a debian.iso to the usb , and then install debian with it (i've done it) using something like dd if=win7.iso of=/dev/sdb, but i don't know if this would work for windows 7 iso,and if dd will correctly copy the iso to the usb. I suppose that if you are able to boot and install windows 7 from the usb , is that the method works,and you can forget of problems later with the windows 7 installation (problems because some files could not be copied or like). So , i remembered that Microsoft created a tool to copy the iso to the usb using windows. So i thought that i could install in my pc , virtual box , as i have VT and 8 GB ram in it, and download the iso from microsoft ,install windows 7 in the virtual machine , and then copy the iso inside the machine , donwload the iso tool, and atach a usb to the pc, connect it to the guest , and use the tool to copy the iso to the USB. But i don't now if is possible to use a virtual machine to do this , or the virtualization could give problems with the usb, or something. I have found some minutes ago this How to make a windows 7 usb flash install media, from linux? The first method (dd) is the one i like more , and i trust more ( i don't now if the second method using ms-sys , works well , and if i can trust it. I understand that a iso is like a .rar , but no compressed,only containing the files ,so mount the iso and cp the data inside perhaps is ok. Although the method i like more is the microsoft one (more because is from microsoft , and i suppose they now what they do ,at least with this usb related thing, than anything). Perhaps worth more to buy a external dvd writer haha ... Should the virtual machine method work ?

  Read the article

• Second network card configuration not working.

  - by Sebas

  I have 4 servers running Centos 5. All of them have two ethernet network cards. I have configured 192.168.1.x IP addresses on their eth0 card. They are all connected to the same switch using their eth0 card and they are all working. I have configured 10.72.11.x IP addresses on their eth1 card.They are all connected to the same switch - a different one from the switch used with eth0 card - using their eth1 card and they are NOT all working. Their configuration files is like: DEVICE=eth1 BOOTPROTO=static IPADDR=10.72.11.236 BROADCAST=10.72.11.191 NETMASK=255.255.255.192 NETWORK=10.72.11.128 HWADDR=84:2B:2B:55:4B:98 IPV6INIT=yes IPV6_AUTOCONF=yes ONBOOT=yes The interfase is starting and configured as I need. [root@sql1 network-scripts]# ifconfig eth0 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:97 inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::862b:2bff:fe55:4b97/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2981 errors:0 dropped:0 overruns:0 frame:0 TX packets:319 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:386809 (377.7 KiB) TX bytes:66134 (64.5 KiB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 84:2B:2B:55:4B:98 inet addr:10.72.11.236 Bcast:10.72.11.191 Mask:255.255.255.192 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:48 Memory:dc000000-dc012800 I also added a route-eth1 file that looks like: 10.0.0.0/8 via 10.72.11.254 Routing looks fine to me: [root@sql1 network-scripts]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.72.11.192 0.0.0.0 255.255.255.192 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.72.11.254 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 But I cannot ping one server from the other. [root@sql1 network-scripts]# ping 10.72.11.235 PING 10.72.11.235 (10.72.11.235) 56(84) bytes of data. From 10.72.11.236 icmp_seq=1 Destination Host Unreachable From 10.72.11.236 icmp_seq=2 Destination Host Unreachable From 10.72.11.236 icmp_seq=3 Destination Host Unreachable From 10.72.11.236 icmp_seq=4 Destination Host Unreachable From 10.72.11.236 icmp_seq=5 Destination Host Unreachable From 10.72.11.236 icmp_seq=6 Destination Host Unreachable ^C --- 10.72.11.235 ping statistics --- 7 packets transmitted, 0 received, +6 errors, 100% packet loss, time 6033ms , pipe 3 What am I doing wrong?

  Read the article

• nconf nagios config no services defined

  - by user1508056

  I've setup Nagios core on OSX 10.7 server via macports fine. It seems to load fine and the sample config files all copied over to /opt/local/etc/nagios/objects/ fine and are specified correctly in the nagios.cfg file. I then installed nconf manually and got it running without much fight. Then I clicked on "Generate Nagios config" in nconf and get 1 warning and 4 errors. When I expand the error box here what I see: Nagios Core 3.5.0 Copyright (c) 2009-2011 Nagios Core Development Team and Community Contributors Copyright (c) 1999-2009 Ethan Galstad Last Modified: 03-15-2013 License: GPL Website: http://www.nagios.org Reading configuration data... Read main config file okay... Read object config files okay... Running pre-flight check on configuration data... Checking services... Error: There are no services defined! Checked 0 services. Checking hosts... Error: There are no hosts defined! Checked 0 hosts. Checking host groups... Checked 0 host groups. Checking service groups... Checked 0 service groups. Checking contacts... Error: There are no contacts defined! Checked 0 contacts. Checking contact groups... Checked 0 contact groups. Checking service escalations... Checked 0 service escalations. Checking service dependencies... Checked 0 service dependencies. Checking host escalations... Checked 0 host escalations. Checking host dependencies... Checked 0 host dependencies. Checking commands... Checked 0 commands. Checking time periods... Checked 0 time periods. Checking for circular paths between hosts... Checking for circular host and service dependencies... Checking global event handlers... Checking obsessive compulsive processor commands... Checking misc settings... Warning: Nothing specified for illegal_macro_output_chars variable! Total Warnings: 1 Total Errors: 3 I've tried several different things (played with cache settings, changed file permissions/ownership, edited some config files manually, etc.) but nothing gets me past this step. The thing is, when I run 'sudo nagios -v /opt/local/etc/nagios/nagios.cfg' the output shows it is reading a number of services, a localhost, and a contact in the .cfg files...so I'm pretty confident those are ok and the problem is nconf isnt reading the correct .cfg files or something like that. Any ideas what to double check? I did lots of googling and found nothing on this specific issue--so either I'm special (I'm not) or am overlooking something really simple. The path to nagios binary is listed as /opt/local/bin/nagios, if that matters. Also, all the nagios files are owned by nagios:nagios, wheras nconf files are owned by user, with only the directories/files specified in the nconf docs belonging to the _www user and/or group (things like output, temp, config, etc.). Thanks.

  Read the article

• Nginx: Forward all Subdomains

  - by mgutt

  My code doesn't work with second level tld's like domain.co.uk The strainge thing is, that it works in php with preg_match() ^^ Here is my conf: # add www. if ($host ~ ^(?!www)) { rewrite ^/(.*)$ http://www.$host/$1 permanent; } # remove subdomain if ($host ~ "^www\.(.*)\.(.*\.([a-z]{2,4}|[a-z]{2}\.[a-z]{2}))") { set $host_without_sub $2; rewrite ^/(.*)$ http://www.$host_without_sub/$1 permanent; }

  Read the article

• How can I map my server's IP address to my domain?

  - by samoz

  I rented some server space from a new host and have a static IP address and a domain name that I previously purchased, but I do not know how to register the domain name to point to my server. My previous host did this for me, but my new host only offers hardware, i.e. they won't do it for me. How can I register a domain name I own to point to my server's IP address?

  Read the article

• How to completely disable IPv6 for loopback interface on RHEL 5.6

  - by Marc D

  I've done lots of research on how to disable IPv6 on RedHat Linux and I have it almost completely disabled. However the loopback interface is still getting an inet6 loopback address (::1/128). I can't find where IPV6 is still enabled for loopback. To disable IPV6 I added the following settings to /etc/sysctl.conf: net.ipv6.conf.default.disable_ipv6=1 net.ipv6.conf.all.disable_ipv6=1 And also added the following line to /etc/sysconfig/network: NETWORKING_IPV6=no After rebooting, the inet6 address is gone from my physical interface (eth0), but is still there for lo: # ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:50:56:xx:xx:xx brd ff:ff:ff:ff:ff:ff inet 10.x.x.x/21 brd 10.x.x.x scope global eth0 If I manually remove the IPV6 address from loopback and then bounce the interface, it comes back: # ip addr del ::1/128 dev lo # ip addr show lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo # ip link set lo down # ip link set lo up # ip addr show lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever I believe IPV6 should be disabled at the kernel level as confirmed by sysctl: # sysctl net.ipv6.conf.lo.disable_ipv6 net.ipv6.conf.lo.disable_ipv6 = 1 Any ideas on what else would cause the loopback interface to get an IPV6 address?

  Read the article

• How do I connect to SSH without the password to be requested every time ? - Already follow some answers here but it doesn't work

  - by MEM

  MAC OS X Lion 10.7.3 1) On host, I've created an authorized_keys file inside .ssh folder, by doing: touch authorized_keys 2) I've copy my public ssh key into host .ssh folder by doing: scp ~/.ssh/mykey.pub [email protected]:/home/userhost/.ssh/mykey.pub 3) I've place it's contents inside authorized files by doing: cat mykey.pub >> authorized_keys 4) Then I've removed the mykey.pub file: rm mykey.pub 5) On my terminal, locally, inside my ~/.ssh folder I made: ssh-add mykey (notice that it is without the pub extension); 6) I've closed and opened again the terminal. When I first connect to this host, it has being added to the *known_hosts* file inside ~/.ssh; I've pico known_hosts and the hash is there. Still, every time I connect by doing: ssh [email protected] it requests a password ! What am I missing here ? UPDATE: I've done EVEN TWO MORE THINGS here: 7) Set your key to be the default identity - if it doesn't exist, create; touch ~/.ssh/config and place inside the following line: IdentityFile ~/.ssh/yourkeyname *id_rsa is normally your default key. You should switched to your key. This tells that the outgoing ssh connections should use this as a default identity.* 8) Add a bash process to your ssh-agent: ssh-agent bash ssh-add ~/.ssh/yourkeyname Lisinge answer helped but it's not definitive. If we restart our machine, the password gets prompted again!!! How can we debug this? What can we do here? How can we check where is this process failing ? UPDATE 2: If I use: ssh -v -i <keyfile> [email protected] I get among other things: OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 Warning: Identity file yourkeyname not accessible: No such file or directory. This message refers to what? The identify file is not accessible on the localhost, or it's not accessible on the remote host ? Please advice

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >