Search Results

Search found 5727 results on 230 pages for 'routed commands'.

Page 92/230 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Turned off my computer and o it's opened up in grub. How do I tell it to boot into lubuntu?

  - by Magpie

  It's just a commandline. I have tried my usual trick of sticking a usb with lubuntu in there to see if I can boot from my usb but I get a boot error (I normally wouldn't using that usb). GNU grub version 2.00-7ubuntu11 also just using basic things I know I hits ls then tried boot hd0 but it says: you need to load the kernel first I have no idea how to do this. I looked at the commands and most of them hve obscure names that are not helpful. UPDATE: I hit exit and that allowed be to boot from usb. Hopefully I will be able to find what I need to install to get it booting normally again from there.

  Read the article

• can't control pianobar after using echo

  - by Ubuntuusr22222

  I have a script that starts pianobar (pandora player) and autoloads into tty2 after booting. I'm running Ubuntu Precise 12.04. it's a pretty simple script: #!bin/bash sleep 5 echo "2" | pianobar This works, it selects station 2 and begins playing... but when I try to type in commands it doesn't work (like pushing "p" for pause.) It'll show the letter for a second, then hide it. If I try to exit with ctrl+z it just sits there and I can't use it at all. If I run this it works fine but doesn't auto-select the second station: #!bin/bash sleep 5 pianobar Is there anyway to write this so it will automatically input "2" and then allow me to control from there? Or am I stuck with having to select 2 every time I boot up?

  Read the article

• How can I use a CanoScan N640Pex scanner over a USB/parallel cable?

  - by detly

  I have an old CanoScan N640Pex flat bed scanner and a USB-to-parallel port cable through which I can connect it to my PC. Unfortunately neither Simple Scan nor XSane detect the scanner. I'm running Ubuntu 12.04 (plus updates and backports) with kernel 3.2.0-31-generic. dmesg tells me this when I plus the cable in: [256411.641910] usb 7-1: new full-speed USB device number 10 using uhci_hcd [256411.872392] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [256411.872417] usbcore: registered new interface driver usblp lsusb shows this device for my cable: Bus 007 Device 010: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port The device node created is /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Sep 9 17:46 /dev/usb/lp0 There is no extra information from any of these commands when I attach the scanner to the cable and power it on, though. I suspect I might need to change something in /etc/sane.d/canon_pp.conf, but I have no idea what to put for the ieee1284 line, since there is pretty much zero documentation for that parameter. So how can I get it to work?

  Read the article

• Macro to Add using System.Linq

  - by Aligned

  I have Visual Studio 2010 setup to remove and sort settings on save with the Power Commands extensions. This is great, but sometimes it removes the using System.Linq at the top. I also find myself scrolling to the top to add the using when I first add System.Linq. So I wrote a quick macro to do it for me. Sub AddUsingLinq()        DTE.ActiveDocument.Selection.StartOfDocument()        DTE.ActiveDocument.Selection.StartOfLine(vsStartOfLineOptions.vsStartOfLineOptionsFirstText)        DTE.ActiveDocument.Selection.Text = "using System.Linq;"        DTE.ActiveDocument.Selection.NewLine()        DTE.ExecuteCommand("Edit.FormatDocument")        DTE.ExecuteCommand("Edit.RemoveAndSort")        DTE.ActiveDocument.Save() DTE.ExecuteCommand("View.NavigateBackward")    End SubHook this up to a shortcut (tools -> options -> keyboard, I chose ctrl + x, c) and you'll be moving faster than ever.

  Read the article

• I can't get a native resolution of 1920x1080 on 11.10 (AOC f22 on a Nvidia Geforce GTS 450)

  - by Mikeeeee

  I have a problem were the highest resolution I can get is 1360x769, this is a 22 inch LCD monitor with a native resolution of 1920x1080_60 I have tried numerous drivers but nothing changed I tried editing the xorg.conf scipt with no success (I am a noob with linux though). Running many commands in terminal witch I got from people with similar problems only gives me errors like "Failed to get size of gamma for output default. I get edid checksum is invalid error on boot down also. I think there maybe a communication problem between my screens EDID and ubuntu although xp and windows 7 detect my screen without any errors and automatically set native resolution. also when I am installing ubuntu I get a horrible screen flashing every few seconds until I have installed the nvidia driver. pc specks if it helps x64 os, mainboard N68PV-GS, 4 gig ram, AMD Phenom(tm) 9350e Quad-Core Processor × 4, Nvidia Geforce gts450 512mb, hard drives set up in a onboard nvidia raid array striped. realy need to get a better resolution, 1360x769 does not look nice on a 22 inch screen. ty

  Read the article

• Writing Ubuntu shell scripts

  - by Lukesh

  Write a script that will shut down one of your server called “appsserver” every night in order to preserve power. But before the appsserver is brought down, your script should do the following: Check if there are any users logged into the appsserver Check the size of the directory /usr/tmp is bigger than 1G and delete all its content. If (a) is true, send a broadcast message to all user that the machine will shut down in 20 minutes and that they should log out of the appsserver All the output of the commands in your script should be sent to a log file with the script running date appended to the log file itself (e.g. shutdown_14_Nov_2011.log).

  Read the article

• Are these interview questions too difficult for entry-level C++ positions?

  - by Banana

  I recently had a few interviews for programming jobs within the financial industry. I am looking for entry-level positions as I specify in the cover letter. However I am usually asked questions such as: - all two-letters commands you know in unix - representation of float/double numbers (ieee standard) - segmentation fault memory dump, and related issues - all functions you know to convert string to integer (not just atoi) - how to avoid virtual tables - etc.. Is that the custom? Because I don't think this kind of questions make sense for someone willing to get an entry-level job. Is it totally crazy to think that they should ask more conceptual questions? This is beginning to driving me nuts, honestly. Thanks

  Read the article

• Any chance for fully working X1600 PCI-E ID 71c3/Unity under Ubuntu 12.04?

  - by user74975

  How can I get Unity working under an ATI Radeon X1600 PCI-E on Ubuntu 12.04? I'm rather Windows guy, but I can do some things with CLI. ATI seems to have ended support for this card for both Windows and Linux. Theres no proper driver in jockey; binary driver from Software Center doesn't give Unity, just Unity 2D. Yes, I've tried the commands from this post - without any positive results; should I try installing drivers manually?

  Read the article

• New "How do I ..." series

  - by Maria Colgan

  Over the last year or so the Optimizer development team has presented at a number of conferences and we got a lot of questions that start with "How do I ...". Where people were looking for a specific command or set of steps to fix a problem they had encountered. So we thought it would be a good idea to create a series of small posts that deal with these "How do I" question directly. We will use a simple example each time, that shows exactly what commands and procedures should be used to address a given problem. If you have an interesting "How do I .." question you would like to see us answer on the blog please email me and we will do our best to answer them! Watch out for the first post in this series which addresses the problem of "How do I deal with a third party application that has embedded hints that result in a sub-optimal execution plan in my environment?"

  Read the article

• Both bluetooth and wifi not connecting

  - by raff5184

  I'm having problems both with bluetooth and wifi, my pc is a Lenovo B5400. The BT can do a scan, but it isn't able to find any devices; I don't see any wifi network (but I have a working Ethernet connection). I read many topics on the internet but before trying different solutions and make some changes (I just installed Ubuntu 14.04) I would firstly try to understand what could the problem depend on. What are the commands I can use to see what's going on? Thank you in advance

  Read the article

• How do I fix hibernate?

  - by Vivek

  Suspend and Hibernate was not working in my Ubuntu 11.04 and I followed these instructions to fix the issue by installing uswsusp. The commands s2ram and s2disk were working fine for me and hence I replaced the contents of hal-system-power-suspend-linux and hal-system-power-hibernate-linux as directed in the above link. Now after my upgrade to Ubuntu 11.10, I am unable to hibernate my system. How to rectify this issue? Is there any config file which I need to change for hibernate to function properly?

  Read the article

• huwai 1731 ( mobile broadband ) not working with dell inspiron 3521

  - by N.Ramkumar

  Please help, one of my friend shared this note ( enclosed below), I used these codes and my laptop is able open the data card but I am not getting any signals. I am able to work with wired connection, but wi-fi and mobile broad band are not working. Please help. sudo apt-get purge usb-modeswitch sudo apt-get update sudo spt-get install usb-modeswitch sudo apt-get update gksudo gedit /lib/udev/rules.d/40-usb_modeswitch.rules Once you enter these above commands 40-usb_modeswitch.rules text file will open. Then, copy below mentioned lines into 40-usb_modeswitch.rules text file. #Huawei E1731 ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1446", RUN+="usb_modeswitch '%b/%k'" Save the file Then type : sudo apt-get update Then restart the machine.

  Read the article

• Replacing a C++ ActiveX component with a .NET implementation?

  - by Leon Breedt

  I have existing managed and unmanaged software using an ActiveX component supplied by a third party to perform some communications, but it is now required that this communication be routed through my application. Ideally I'd be able to install a .NET component which will expose exactly the same interface, and will be usable as a drop-in replacement. However, I am running into the limits of my understanding of COM, which admittedly is quite minimal. How best to ensure that my implementation of the interface is 100% binary compatible with the existing object? How do I ensure that applications use my implementation of the interface instead of the legacy implementation? Is it simply a matter of registering my implementation, and unregistering the legacy one? How do I ensure it's a "drop-in" replacement, and requires no changes to existing software? How do I ensure unmanaged code can use it without issue? Note: I am able to require that .NET 4.0 be used, if that will make things simpler.

  Read the article

• NVIDIA driver problem after updating to 12.04

  - by patlan

  As the title says I have problems with the driver after updating to 12.04. The GUI doesnt start anymore, I only see the terminal. I have googled this for a couple of days now and have tried different things like running commands for update, upgrade and tried to uninstall and re-install the NVIDIA-drivers but with no success. No matter what I do I get this message: "Error: API mismatch: the NVIDIA kernel module has version 295.40, but this NVIDIA driver component has version 295.49. Please make sure that the kernel and all NVIDIA driver components has the same version." Is there anyway I can fix this from the terminal?

  Read the article

• And again... VMware Player 4.0.4 on Ubuntu 12.04 (Precise Pangolin)

  Even with the new version of VMware Player 4.0.4 you are still required to patch their sources. So, same game as last month. Just changing the value of the required version in the kernel patch script of Stefano Angeleri (weltall) and you are done: nano patch-modules_3.2.0.sh Please change line 8 at the top of the script like so: plreqver=4.0.4 Save your modification and then run the following commands: sudo rm /usr/lib/vmware/modules/source/.patchedsudo ./patch-modules_3.2.0.shsudo service vmware restart And again, on first start VMware will present you their EULA which you have to accept, and everything gets back to normal operation mode. Interestingly, one day ago the Ubuntu repositories provided a newer kernel version 3.2.0-25, so everything is running fine for now.

  Read the article

• Flashing screen hovering over menubar on left side

  - by iwekb

  Just installed Ubuntu 10.10 netbook version on an older Dell Laptop (no other operating system installed). When hovering with mouse over menu bar, the full screen changes to default coloured back ground shortly and then back to normal (as after start-up) again. And that each time the mouse is over any of the (default) icons on the menu bar. I am not able to select any icon. No left or right click works on icons or anywhere on the menubar apart from the left top small icon, white Ubuntu logo, and the right top small icons for WiFi, sound, mail, shut-down etc. Those icons work. I tried re-installation again and all patches are downloaded. Same problem. Problem is that I can't enter commands either to reduce e.g. the swappiness (if that would be of any help). Can somebody help me that encountered similar problem or knows a resolution?

  Read the article

• Boot prompt hyphens

  - by purjuntu

  Booting an Ubuntu DVD, pressing F6 and then ESC presents the boot prompt with the default kernel options, with the possibility of editing and adding extra options. Something like: kernel /casper/vmlinuz boot=casper quiet splash -- Questions: What's the meaning of the two hyphens? When adding an extra option (such as "toram" or "vga=791"), is there any difference between adding it BEFORE or AFTER the hyphens? When typing commands in Bash, two hyphens in a row means "options end here; anything that follows should be treated as an argument, even if it starts with a hyphen". But the hyphens must have another meaning at the boot prompt, as "toram" or "vga=791" really are options.

  Read the article

• I want absolute atomicity on a single couchdb instance (insert, fail if already existing)

  - by MatternPatching

  I've come to really love the couchdb style of organizing and updating data, but there are a few situations where I really need to be able to create an entry and determine if an equivalent entry is already in existence before returning to the user. The only situation that this is absolutely necessary for my application is user registration. I'm fine with having all user registration writes go to a particular, designated couchdb instance known as the "registration-instance". I want to hash the user_id into some _id to use. Then execute a put with this _id, but fail if the _id is already inserted. I need to return to the user that the user name is already reserved, and I cannot detect the conflict later and resolve it at that point, because the user would be under the impression that they had reserved the user name. I don't see why couchdb couldn't provide some way to do this, under the assumption that you designate that inserts for a particular "type" of document always are routed to a particular instance.

  Read the article

• Stucked in the grub command prompt

  - by user903645

  I have a windows xp os, and I ve decided to give ubuntu a shot. I installed and It when rebooting it did boot by default windows. I red several forums and after entering those commands: sudo mkdir /mnt/ubuntu sudo mount /dev/sda2 /mnt/ubuntu sudo grub-install /dev/sda --root -directory=/mnt/ubuntu after rebooting the system showed me the command grub. And I cannot get anywhere. I don t have a windows cd to fix anything. so how can I launch windows from this command grub? Thanks... I am in a real mess.

  Read the article

• Ask the Readers: How Do You Share Your Photos?

  - by Jason Fitzpatrick

  It’s easy to snap away and fill up a memory card, but not quite as easy to share your best pics with your friends and family. How do you get your pics from your camera to your friends’ monitors? This week we’re interested in hearing about your favorite photo sharing tools and techniques. What’s your workflow for getting your photos from your digital camera to the virtual desktops of friends around the globe? Sound off in the comments with your favorite resources, applications, and photo sharing tricks. Make sure to check in on Friday for the What You Said roundup to see how your fellow readers get the job done. 8 Deadly Commands You Should Never Run on Linux 14 Special Google Searches That Show Instant Answers How To Create a Customized Windows 7 Installation Disc With Integrated Updates

  Read the article

• Ubuntu is not booting - "No init fount. Try passing init= bootarg." , Install from Windows (Wubi)

  - by Hunzai

  Unbuntu 10.04 installed from Windows 7 (Wubi filesystme), Now Ubuntu is not booting giving this error. Target filesystem doesn't have /sbin/init. No init fount. Try passing init= bootarg. BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built in shell (ash) Enter 'help' for a list of build in commands (initramfs) The solutions given by folk is like [http://learntoconfigure.wordpress.com/2012/11/29/ubuntu-cannot-boot-no-init-found-try-passing-initbootarg/] Can't solved my problem because Ubuntu is installed from windows and all the drive shows of windows, Can anyone help me? thanks, Hunzai

  Read the article

• Remove ubuntu when it's the only OS on the machine

  - by Frances

  I've been trying for hours to remove ubuntu 12 which is the only OS on my laptop. I don't have a Windows installation there. I've followed various bits of help, including trying to get boot-repair to work (I just get error messages when I try to run the recommended commands). Please can someone tell me how to get rid of ubuntu? It won't recognise my .iso copy of Windows - tries to read the DVD and then just boots ubuntu anyway. The DVD is fine - I can use it on other computers and it's perfectly OK. Frances

  Read the article

• Compiling old versions of R (2.11 or older) on Ubuntu 13.10 (or newer)?

  - by user283293

  I am trying to compile an old version of R (2.11.1, specifically). "Why?", you might ask. Well, I have a program I am trying to run (that was not written by me, but I am hoping to use in my research) that was written in "old" R, and the program writer has specifically mentioned that R-2.11.1 or older must be used. I have run ./configure with no obvious errors (the entire output being far too long to post here, but I have been warned that I cannot make PDF, DVI, or HTML versions of the help pages, which I'm not too concerned about). Next, when I pass the make command, I am met with the following error (after a long stream of successful commands): Warning in solve.default(rgb): unable to load shared library '/home/sbowerma/Programs/R-2.11.1/modules//lapack.so': /home/sbowerma/Programs/R-2.11.1/lib/libRlapack.so: undefined symbol: _gfortran_compare_string Error in solve.default(rgb) : lapack routines cannot be loaded Error: unable to load R code in package 'grDevices' Execution halted However, I have confirmed that the library lapack.so is, in fact, in the exact position it is supposed to be.

  Read the article

• How to operating systems… run… without having an OS to run in?

  - by Plazmotech Binary

  I'm really curious right now. I'm a Python programmer, and this question just boggled me: You write an OS. How do you run it? It has to be run somehow, and that way is within another OS? How can an application run without being in an OS? How do you tell the computer to run, say, C, and execute these commands to the screen, if it doesn't have an OS to run in? Does it have to do with a UNIX kernel? If so, what is a unix kernel, or a kernel in general? I'm sure OSes are more complicated than that, but how does it work? It would be really brilliant to know this! Thanks.

  Read the article

• C# Event routing in code behind

  - by Nate

  I'm building a WPF MVVM-ish application. I want to be able to display an event log containing items in a collection that exists in my viewmodel. I want any of the objects in the model to be able to add data to the event log. Therefore every object needs to be able to pass data back to one central collection for databinding in the view. I could implement an event in every one of my data classes and manually pass the events up the object heirarchy but this seems super clumsy. On the visual tree a Routed Event would take care of this, is there some equivelent in the model scope? Any other ideas?

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >