Search Results

Search found 28559 results on 1143 pages for 'upgrade issue'.

Page 92/1143 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• excel 2010 format and input issue

  - by Craig Gunn

  I have completed a very complex Excel spreadsheet with a lot of equations, except ... I forgot to include September I have Jan through Dec, all the months, except the calculations for September. Of course all the equations are currently perfect for the data that's here. How do I add a whole new column without ruining the previous equations? PS: tomorrow is my holidays and I have to go to work to finish this table, so bad. would really appreciate some kind expertise :) cheers craig.

  Read the article

• Mikrotik and NAT/Routing issue

  - by arul

  I have basic NAT/Routing problem with Mikrotik RB750 that I've been unable to solve over the past days. From our ISP we have 26 IP addresses: 10.10.10.192/27, with 10.10.10.193 being the gateway and 10.10.10.194 the first available IP. What I need is that everything connected to ether2 gets a public IP from the DHCP server, and everything connected to ether3 gets a local IP from another DHCP (192.168.100.0/24). All clients should have internet access (I'll figure out bandwidth throttling later) and optimally just 'see' each other (all boxes are Win7, I guess this can ultimately be handled with VPN). Here is my setup: ether1 (10.10.10.194) is connected directly to ISP. 20 clients connected to ether2(10.10.10.195), and another 20 to ether3(10.10.10.196) (both through same 24 port switches). This is my setup, which doesn't work, all 20 clients from ether2 can access the internet, though all comm. seems to come from 10.10.10.194 (is this due to the masquerade on ether1?), and ether3 can't access the internet at all. I think that I need to masquerade ether3, and SNAT/DNAT or NETMAP ether2, but that doesn't work either, I guess that I need to somehow 'wire' both ether2+3 to ether1. Address list: # ADDRESS NETWORK INTERFACE 0 ;;; public 10.10.10.194/32 10.10.10.192 ether1-gateway 1 ;;; inner DHCP 192.168.100.0/24 192.168.100.0 ether3-private 2 ;;; public 10.10.10.195/32 10.10.10.192 ether2-pub 3 ;;; public 10.10.10.196/32 10.10.10.192 ether3-private NAT 0 ;;; ether3 nat chain=srcnat action=src-nat to-addresses=10.10.10.196 src-address=192.168.100.0/24 out-interface=ether3-private 1 ;;; ether3 nat chain=dstnat action=dst-nat to-addresses=192.168.100.0/24 in-interface=ether3-private 2 ;;; ether1 masquerade chain=srcnat action=masquerade to-addresses=10.10.10.194 out-interface=ether1-gateway Routes: # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 ether1-gateway 1 2 A S 10.10.10.192/27 10.10.10.195 ether2-pub 1 3 ADC 10.10.10.192/32 10.10.10.195 ether2-pub 0 ether1-gateway ether3-private 4 ADC 192.168.100.0/24 192.168.100.0 ether3-private 0 IP Pools: # NAME RANGES 0 public-pool 10.10.10.201-10.10.10.220 1 private-pool 192.168.100.2-192.168.100.254 DHCP configs: # NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP 0 public-dhcp ether2-pub public-pool 3d 1 private-dhcp ether3-private private-pool 3d Thanks!

  Read the article

• Blue screen issue

  - by Jack

  I received several BSOD's that are recorded in the following logs: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 3081 Additional information about the problem: BCCode: 50 BCP1: FFFFF95FF8150C10 BCP2: 0000000000000008 BCP3: FFFFF95FF8150C10 BCP4: 0000000000000005 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\040412-20030-01.dmp C:\Users\Jack\AppData\Local\Temp\WER-33025-0.sysdata.xml ~~~~~ Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 3081 Additional information about the problem: BCCode: 1e BCP1: 0000000000000000 BCP2: 0000000000000000 BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\040412-32729-01.dmp C:\Users\Jack\AppData\Local\Temp\WER-64319-0.sysdata.xml It seems to occur at random. I have gone 2 months without a BSOD, then I have gone a week with 10+ without changing what I am doing. This is my system: Windows 7 Professional 64-bit Gigabyte GA-890GPA-UD3H AMD Phenom II x6 1090T Processor 3.2GHz 8GB Ram(4X 2GB) Radeon HD 7850 2TB HDD Thermaltake 500W PSU I'm not sure about what the BSOD says, it just counts to 100 by 5's then restarts the computer. It happens fast and I have tried to get a picture before but to no avail.

  Read the article

• CNTLM issue with intranet (maybe DNS)

  - by htorque

  On my Linux box I need to use an ISA proxy that requires authentication to reach the internet. I therefore installed CNTLM and configured it to point to the proxy address and listen on port 4321. I then configured my GNOME distribution to use localhost:4321 as global proxy for HTTP and HTTPS. The result: I can connect to the internet. I can ping intranet IPs, I do receive name resolution for intranet sites, yet I cannot ping them or open any intranet site in a browser (configured to use the distributions proxy) unless I use the site's IP address. I tried blocking the intranet IP range in the CNTLM config file without luck.

  Read the article

• Virtual PC network connection setting issue

  - by George2

  Hello everyone, I am using Virtual PC 2007 on Windows Vista Enterprise x86. My confusion is about the network setting for guest OS. In the network setting, I can set the network adaptor of guest OS to one of my physical network adaptors of my host OS (I have tested that it works for guest OS to use the physical network adaptor of host OS to access external network). But in this way, 1. since both host OS and guest OS will use the same physical network adaptor, will there be any conflicts (e.g. same H/W serves two OS)? 2. will guest OS share a part of network bandwidth of the host OS of the physical network adaptor? 3. What means NAT setting in guest OS network connection adaptor? thanks in advance, George

  Read the article

• ReadyNAS issue with Google Apps?

  - by Jauder Ho

  The power went out (again) in my house today so I decided to set up some alerting. Since I have a ReadyNAS and the latest version of Raidinator seems to have SMTP TLS support, I figured I would try setting things up to email to a domain I have hosted on Google Apps. At this point, I have everything working IF I use a Gmail account but as soon as I switch to a Google Apps email address, it stops working and complains with smtpstatus=535 smtpmsg='535-5.7.1 Username and Password not accepted. Learn more at \n535 5.7.1 http://mail.google.com/support/bin/answer.py?answer=14257 30sm16076226wfd.23' errormsg='authentication failed (GNU SASL, method PLAIN)' exitcode=EX_NOPERM I'm wondering if anyone else has encountered this. Google's extremely aggressive captcha does not help but I am able to log in now without a captcha from a browser so I'm open to any ideas why the simple switch of a user/password combo that is supposed to work does not. I'm also attaching my config so that others can see how to set things up.

  Read the article

• TimeZone Issue during DayLight Saving

  - by Viren

  I just been bugged by the Day light saving hours I seem that 3rd November 2013 01:00:00 start EST time Now ever Time I set my time to 3rd November 2013 00:58:xx(some seconds) and run date it give me valid Time zone i.e EDT but even after the time pass 01:00:00 and I still query the date library I still see the Time zone as EDT and not EST have a look at this screenshot You can clearly see the Time zone saying as EDT even when it is EST any one has a clue for this Update There is one other finding I found if I restart my machine I see this More Update Before Restart After Restart

  Read the article

• TimeZone Issue during DayLight Saving

  - by user1328293

  I just been bugged by the Day light saving hours I seem that 3rd November 2013 01:00:00 start EST time Now ever Time I set my time to 3rd November 2013 00:58:xx(some seconds) and run date it give me valid Time zone i.e EDT but even after the time pass 01:00:00 and I still query the date library I still see the Time zone as EDT and not EST have a look at this screenshot You can clearly see the Time zone saying as EDT even when it is EST any one has a clue for this Update There is one other finding I found if I restart my machine I see this

  Read the article

• How to Diagnose a Pre-Operating System Load or Hardware Issue

  - by soandos

  How can I find out if my problem is hardware based? If it is, how can I figure out what component is to blame How can I fix other pre-operating system issues? As an aside, what are all of these components responsible for, and if they break, what can go wrong? (This question comes up frequently, and the suggested solutions are usually the same. This community wiki is an attempt to serve as the definitive, most comprehensive answer possible. Feel free to add your contributions via edits.)

  Read the article

• APC Smart UPS network shutdown issue

  - by Rob Clarke

  Here is a bit about our setup: We have 2x Smart-UPS RT 6000 XL units with network management cards We are running Powerchute from a network server Powerchute is connected to the management cards of both UPSs UPSs are set to do a graceful shutdown via Powerchute when the battery duration is under 20 minutes We also have a command file that runs with Powerchute Although our setup is redundant we do not have an equal load on each server due to APC switches for single power devices The problem is that as we do not have an equal load on each server the batteries drain at different rates. This means that the UPSs both get to the specified low battery duration at completely different times. The problem here is that UPS 1 may have run down to 5 minutes and is in desperate need of initiating a Powerchute shutdown - UPS 2 still has 25 minutes of runtime so no shutdown is initiated. Consequently UPS 1 goes down and takes all the servers with and then shuts down UPS 2 as well! What we need to happen are 1 of either 2 things: Powerchute initiates the shutdown as soon as either UPS reaches the 20 minutes low battery duration setting - and doesnt wait for both The UPS with the heavier load expends its entire battery but does not shutdown both UPSs and lets the load be switched across to the UPS that still has runtime remaining. That way when the UPS that still has runtime reaches its low battery duration it can proceed with the graceful shutdown via Powerchute. Hope that makes sense, any help is greatly appreciated!

  Read the article

• Dependencies issue while installing Graphviz 2.28

  - by M. Saâd

  I want to install this packages for Nagvis : graphviz-2.28.0-1.el6.i686.rpm graphviz-doc-2.28.0-1.el6.i686.rpm graphviz-gd-2.28.0-1.el6.i686.rpm graphviz-graphs-2.28.0-1.el6.i686.rpm graphviz-perl-2.28.0-1.el6.i686.rpm But while installing, i have this error : # rpm -ivh graphviz-2.28.0-1.el6.i686.rpm erreur: Dépendances requises: libgdkglext-x11-1.0.so.0 est nécessaire pour graphviz-2.28.0-1.el6.i686 libglut.so.3 est nécessaire pour graphviz-2.28.0-1.el6.i686 libgtkglext-x11-1.0.so.0 est nécessaire pour graphviz-2.28.0-1.el6.i686 libgts-0.7.so.5 est nécessaire pour graphviz-2.28.0-1.el6.i686

  Read the article

• mod_mono 'Service Temporarily Unavailable' issue

  - by Charlie Somerville

  I've deployed an ASP.NET web application on a Linux (Debian) server running Apache 2.2 and mod_mono 1.9 It's working well, however Mono occasionally segfaults and uses the entire CPU which causes the website to stop working and display 'Service Temporarily Unavailable' Killing mono fixes it, but obviously this isn't a good solution. I tailed the system log after this happened and I saw the following error messages from the kernel: Apr 20 01:49:37 charliesomerville kernel: [1596436.204158] mono[17909]: segfault at b645f671 ip b645f671 sp b4ffb604 error 4<6>mono[19047]: segfault at b645f66e ip b645f66e sp b4bf7604 error 4<6>mono[18017]: segfault at b645f66e ip b645f66e sp b52fe604 error 4<6>mono[19668]: segfault at b645f5e6 ip b645f5e6 sp b48f4604 error 4<6>mono[22565]: segfault at b645f674 ip b645f674 sp b45f1604 error 4<6>mono[17700]: segfault at b645f661 ip b645f661 sp b51fd604 error 4<6>mono[19596]: segfault at b645f5e6 ip b645f5e6 sp b49f5604 error 4 Apr 20 01:49:37 charliesomerville kernel: [1596436.208172] mono[23219]: segfault at b645f66e ip b645f66e sp b44f0604 error 4 At the end of Apache's error.log are the following errors: [Tue Apr 20 03:10:23 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 System.ArgumentNullException: null key Parameter name: key at System.Collections.Hashtable.get_Item (System.Object key) [0x00000] at System.Runtime.Serialization.SerializationCallbacks.GetSerializationCallbacks (System.Type t) [0x00000] at System.Runtime.Serialization.ObjectManager.RaiseOnDeserializingEvent (System.Object obj) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectContent (System.IO.BinaryReader reader, System.Runtime.Serialization.Formatters.Binary.TypeMetadata metadata, Int64 objectId, System.Object& objectInstance, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectInstance (System.IO.BinaryReader reader, Boolean isRuntimeObject, Boolean hasTypeInfo, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObject (BinaryElement element, System.IO.BinaryReader reader, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] at System.Runtime.Remoting.Channels.CADSerializer.DeserializeObject (System.IO.MemoryStream mem) [0x00000] at System.Runtime.Remoting.RemotingServices.GetDomainProxy (System.AppDomain domain) [0x00000] at System.AppDomain.CreateDomain (System.String friendlyName, System.Security.Policy.Evidence securityInfo, System.AppDomainSetup info) [0x00000] at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] at Mono.WebServer.ApplicationServer.GetApplicationForPath (System.String vhost, Int32 port, System.String path, Boolean defaultToRoot) [0x00000] at (wrapper remoting-invoke-with-check) Mono.WebServer.ApplicationServer:GetApplicationForPath (string,int,string,bool) at Mono.WebServer.ModMonoWorker.GetOrCreateApplication (System.String vhost, Int32 port, System.String filepath, System.String virt) [0x00000] at Mono.WebServer.ModMonoWorker.InnerRun (System.Object state) [0x00000] at Mono.WebServer.ModMonoWorker.Run (System.Object state) [0x00000] [Tue Apr 20 03:10:26 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:26 2010] [error] Command stream corrupted, last command was -1 Along with the above errors, Apache's error.log is packed with hundreds (if not thousands) of the following error: Maximum number (20) of concurrent mod_mono requests to /tmp/mod_mono_dashboard_default_2.lock reached. Droping request. At the moment, I'm thinking there might be something wrong with configuration here (it's basically running on out-of-the-box config)

  Read the article

• ubuntu 12.04 server and tftp access violation issue on put command

  - by SMYERS

  I installed tftp as per this document: http://icesquare.com/wordpress/solvedtftp-error-code-2-access-violation/ I followed this to the letter 3 times and every time I put a file I get: root@CiscoCFG:~# tftp localhost tftp put test Error code 2: Access violation tftp root@CiscoCFG:~# tftp localhost tftp put test Error code 2: Access violation If I touch the file name chmod 777 the file then do a put it works perfectly fine. My config is as follows: service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /svr/tftp disable = no } the directory /svr/tftp permissions are 777: drwxrwxrwx 3 nobody nobody 4096 Nov 14 10:32 svr This thing should have full permissions as would anyone who wanted to write or read from that directory. I see nothing in the logs im really stumped on this. If the file is already in the directory I can read it all day long, I just cant make NEW files, can not put them, but I can do get's, I can only put to an existing file with permissions @777. Thanks

  Read the article

• Debian + ProFTPD + LDAP Incorrect Password Issue

  - by Tristan Hall

  I have the LDAP configuration configured for ProFTPD and I have modified the modules.conf file to include the LDAP module. However, every time I login with FileZilla I get 530 Login Incorrect. It does this for all users except those whose passwords are defined locally as well as in LDAP. The exact same setup works fine on my CentOS server and I've already tried re-installing it after purging the configuration files.

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

• Issue booting Linux Mint from Live CD?

  - by Vee

  I had Windows 8 and Linux Mint 15 dual booted on my laptop. When I first installed Linux, I wasn't able to load into because the grub would not show. To fix this, I used boot-repair from a Live CD. This time, I updated to Windows 8.1 and it showed a watermark telling me my secure boot wasn't configured properly. I then went and enabled secure boot (BIOS) and I believe it was after that that the Grub would not show once again. I tried to boot from a Linux CD again but when I try, it gives me the following errors: error: failure reading sector 0x0 from 'hd1' error: you need to load the kernel first. Press any key to continue... Before, it was giving me an error with sector 0x6d200 or something instead of 0x0. I am completely unsure of what to do. I do not know what other details to give except that this my have happened after I enabled secure boot, and I actually clicked reset to default setting so I am unsure if any other settings were changed in the BIOS menu.

  Read the article

• Hardware issue: UI freezes and hard drive light goes solid several times per hour

  - by alchemical

  I have a workstation that has been acting up for the last few weeks. It currently has Windows Server 2008 R2 installed on it, and 2 HDD mirrored. A few times per hour the screen will freeze up, applications will say "not responding", sometimes the screen will turn a lighter shaded color--at the same time the HDD light is on solid. This lasts anywhere from 10 to about 50 seconds. Could this be something with one of the drives or the mechanism keeping the mirror in place? Any other ideas?

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• Resolving a BSOD/CPU/GPU issue...

  - by Christian Sciberras

  Hello all, I'm getting a BSOD / system crash (sometimes the PC just quits without a BSOD). Hardware Specifications cpu: i7 920 2666MHz / 8 cores (not OCed afaik) mobo: Asus P6T SE ram: 2x Corsair CM3X2G1333C9 (64bit DDR3 667MHz) gfx: ATI Radeon HD 5970 1GB (XFX HD5970 BE) os: Windows 7 Ultimate 64 bit (legit) All bios, firmware and drivers are all up to date (as of today). Symptoms Sometimes the PC runs smoothly, sometimes I get this BSOD. The BSOD always happens when I'm doing something related to graphics, such as viewing a video or playing a game. I get to know about the imminent BSOD ~10 seconds earlier; the PC starts freezing occasionally but increasing in frequency and length of lag (I noticed processor usage in creased from Process Monitor). I've tweaked BIOS settings occasionally but afaik, it was in vain. A day or so ago, I reset it to factory settings. BSOD contents The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000019, 0x0000000000000000, 0xfffff88001f35180, 0x0000000000000004). 15-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 4 23-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 2 Important The interesting thing is that although the event log (and BSOD screen) blame a "secondary processor", Windows Action Center sometimes blamed the GFX driver (for the same error). Also It is interesting to note that after hibernating my PC, I always get the BSOD.

  Read the article

• Timing issue with autohotscript, fails to dump or open destination file

  - by learnerforever

  I've created a autohotscript to quickly dump selected text into my jot file on the Desktop and I think I'm facing a timing error. The script works like thus: Select text when reading a text file, browsing internet, reading PDF, etc. Hit Ctrl + J Contents of selected text is dumped into my jot file. When I press Ctrl + J very quickly, it sometimes doesn't come up in my jot file and sometimes when I keep pressing Ctrl + J for a long time, many instances of the text appear. Could somebody please point out what's wrong with this script and how I can improve it. ^j:: Clipboard := "" ; clear Send, ^c ; simulate Ctrl+C (=selection in clipboard) selection = %Clipboard% ; save the content of the clipboard FileAppend, `n%selection%`n,C:\Users\jagrati\Desktop\jots.txt return

  Read the article

• litespeed issue with content-type

  - by sandeep.s85

  I am running magento with litespeed. The problem I am facing is that ajax call is being made of which header is set as x-json, but lightspeed is setting another header of text/html content type I've checked that page with apache and everything is working fine. I checked the response headers with apache and litespeed and here are they: With apache: HTTP/1.1 200 OK Date: Fri, 07 Sep 2012 05:58:47 GMT Server: Apache Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Set-Cookie: frontend=164b21c64808a05e806027bdbd4d745d; expires=Fri, 07-Sep-2012 06:58:48 GMT; path=/; domain=mydomain.com; httponly Connection: close Transfer-Encoding: chunked Content-Type: application/x-json With litespeed: HTTP/1.1 200 OK Date: Fri, 07 Sep 2012 06:10:55 GMT Server: LiteSpeed Connection: close Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Set-Cookie: frontend=164b21c64808a05e806027bdbd4d745d; expires=Fri, 07-Sep-2012 07:10:55 GMT; path=/; domain=mydomain.com; httponly Content-Type: text/html; charset=UTF-8 Content-Length: 474 Vary: User-Agent I've also added application/json to mime.properties of litespeed,restarted it but that did not work. Here is the screenshot

  Read the article

• PDF rendering issue os OSX

  - by 2Ti

  I came across some very odd rendering when trying to view a PDF file that needed to print out. I was wondering anyone has come across a similar problem before or has any ideas as to what might be causing this. PDF when viewed on OSX 10.7.4 - Preview version 6.0. I've tried opening the file in Skim but that doesn't work either. PDF as it should be, and as Chrome renders it in browser, but not if I download it onto my machine. Illustrator complains about "an unknown imaging construct" when I open the file, but renders it fine nevertheless, Photoshop doesn't have any problems either.

  Read the article

• Issue with user having a gmail account and Google Apps account using same email/username

  - by Joshua

  Greetings! We have a user in our organization that had been using her email address at our domain at her username for gmail.com We recently moved our folks on to Google Apps, and have just moved our email server over to Google (IMAP/SMTP). I'm having all kinds of trouble only with this user's account with her sending and receiving email via the new Google mail server and wondering if it's because of her existing Gmail account. So her email address with us is [email protected], which is her login/user id with us on our Google Apps site. She still has her gmail identity tied to that same [email protected]. She's ok with deleting her old Gmail account...if I do so however will it goof things up for her going forward with us on the Google Apps site? Will she not be able to receive email? Thanks! Joshua

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >