Search Results

Search found 34195 results on 1368 pages for 'try'.

Page 924/1368 | < Previous Page | 920 921 922 923 924 925 926 927 928 929 930 931  | Next Page >

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

• WIM2VHD failing with "Cannot derive Volume GUID from mount point."

  - by Jacob

  I'm trying to use WIM2VHD according to the instructions on Scott Hanselman's blog post to create a Sysprepped VHD image to boot from. I've installed the WAIK, and I have my Windows 7 sources mounted as a virtual drive. When I try to run WIM2VHD like this: cscript WIM2VHD.wsf /wim:F:\sources\install.wim /sku:Ultimate /vhd:E:\WindowsSeven.vhd /size:30721 I get the following log: Log for WIM2VHD 6.1.7600.0 on 11/2/2009 at 10:51:18.16 Copyright (C) Microsoft Corporation. All rights reserved. MACHINE INFO: Build=7600 Platform=x86fre OS=Windows 7 Ultimate ServicePack= Version=6.1 BuildLab=win7_rtm BuildDate=090713-1255 Language=en-ZA INFO: Looking for IMAGEX.EXE... INFO: Looking for BCDBOOT.EXE... INFO: Looking for BCDEDIT.EXE... INFO: Looking for REG.EXE... INFO: Looking for DISKPART.EXE... INFO: Session key is E01E1ED7-C197-4814-BDE4-43B73E14FCC4 INFO: Inspecting the WIM... INFO: Configuring and formatting the VHD... ******************************************************************************* Error: 0: Cannot derive Volume GUID from mount point. ******************************************************************************* INFO: Unmounting the VHD due to error... WARNING: In order to help resolve the issue, temporary files have not been deleted. They are in: C:\Users\Jacob\AppData\Local\Temp\WIM2VHD.WSF\E01E1ED7-C197-4814-BDE4-43B73E14FCC4 *emphasized text*Summary: Errors: 1, Warnings: 1, Successes: 0 INFO: Done. Any ideas?

  Read the article

• Windows Server 2008R2 Virtual Lab Activation strategies?

  - by William Hilsum

  I have a ESXi server that I use for testing, however, I am often needing to create additional Windows Server virtual machines. Typically, if I do not need a VM for more than 30 days, I simply do not activate. However, I have been doing a lot of HA/DRS testing recently and I have had a few servers up for more than this time. I have a MSDN account with Microsoft and have already received extra keys for Windows Server 2008 R2. I am doing nothing illegal and I am sure if I asked, they would issue more - but, I do not want to tempt fate! I have got 3 different "activated" windows snapshots I can get to at any time. If I try to clone these machines, I get the usual "did you copy or move them VM" message. If I choose copy, as far as I can see, it changes the BIOS ID and NIC MACs which is enough to disable activation. If I choose move, it keeps the activation fine (obviously, I know to change the NIC MAC - I believe I can leave the BIOS ID without problems). However, either of these options keeps the same SID code for the computer and user accounts. After the activation period has expired, as far as I can see, all that happens is optional updates do not work - it seems that the normal updates work fine. Based on this, as you can easily get in to Windows when not activated without any sort of workaround, I was wondering if it is ok just to leave a machine un activated? (However, I obviously would prefer if it was activated!) Alternatively, how dangerous is it run multiple machines on a non domain environment with the same SID? I am just interested to know if anyone can recommend a strategy for me? I have only found one solution that deals with bypassing activation - I am not interested in doing anything remotely dodgy... at a stretch, I am happy to rearm (I have never needed to keep a server past 100 days), but, I would rather have a proper strategy in place.

  Read the article

• Mac 10.5 Python libsvm 64 bit vs 32 bit

  - by shadowsoul

  I have a Mac 10.5 when I type "python" in terminal, it says Enthought Python Distribution -- www.enthought.com Version: 7.3-2 (64-bit) Python 2.7.3 |EPD 7.3-2 (64-bit)| (default, Apr 12 2012, 11:14:05) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "credits", "demo" or "enthought" for more information. then I go to my libsvm/python folder and type "make" which results in make -C .. lib if [ "Darwin" = "Darwin" ]; then \ SHARED_LIB_FLAG="-dynamiclib -W1,-install_name,libsvm.so.2"; \ else \ SHARED_LIB_FLAG="-shared -W1,-soname,libsvm.so.2"; \ fi; \ g++ ${SHARED_LIB_FLAG} svm.o -o libsvm.so.2 when I try to do "from svmutil import *" I get the error: OSError: dlopen(.../libsvm-3.12/python/../libsvm.so.2, 6): no suitable image found. Did find: .../libsvm-3.12/python/../libsvm.so.2: mach-o, but wrong architecture when I do "lipo -info libsvm.so.2", I get: Non-fat file: libsvm.so.2 is architecture: i386 So it looks like I'm running 64-bit python but libsvm ends up as a 32-bit program. Any way I can get it to compile as a 64-bit program?

  Read the article

• Mysql Fail to start

  - by John Naegle

  I'm running a Ubuntu 12.04 LTS Virtual Machine. Last week, the VM stopped unexpectedly now mysql will not start on the VM. These two events may be related, they may not be. When I try to connect: $ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) Then: $ sudo service mysql start start: Job failed to start And $ dmesg [ 1838.218400] type=1400 audit(1374633238.253:50): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18473 comm="apparmor_parser" [ 1838.358656] init: mysql main process (18477) terminated with status 1 [ 1838.358695] init: mysql main process ended, respawning [ 1839.269303] init: mysql post-start process (18478) terminated with status 1 And $ service mysql status mysql stop/waiting I think this means mysql is crashing when it starts: $ sudo mysqld start 130723 21:51:24 InnoDB: Assertion failure in thread 3064211200 in file fut0lst.ic line 83 InnoDB: Failing assertion: addr.page == FIL_NULL || addr.boffset >= FIL_PAGE_DATA InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 02:51:24 UTC - mysqld got signal 6 ; Per the manual, I went to the data directory (/var/lib/mysql) and ran this: myisamchk --silent --force */*.MYI Then: $ sudo mysqld ... InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. ... Is my database corrupt? What can I do to recover? Re-install mysql? Something less drastic? I'm fine with losing the database, I just want a working system.

  Read the article

• How can I erase the traces of Folder Redirection from the Default Domain Policy

  - by bruor

  I've taken over from an IT outsourcer and have found a struggle now that we're starting a migration to windows 7. Someone decided that they would setup Folder redirection in the Default Domain Policy. I've since configured redirection in another policy at an OU level. No matter what I do, the windows 7 systems pick up the Default Domain Policy folder redirection settings only. I keep getting entries in the event log showing that the previously redirected folders "need to be redirected" with a status of 0x80000004. From what I can tell this just means that it's redirecting them locally. Is there a way I can wipe that section of the GPO clean so it's no longer there? I'm hesitant to try to reset the default domain policy to complete defaults. ***UPDATE 6-26 I found that the following condition occurred and was causing the grief here. I've already implemented the new policies for clients, and for some reason, XP was working great, 7 was refusing to process. The DDP was enforced. Because of this, and the fact that the folder redirection policies were set to redirect back to the local profile upon removal, it was forcing clients to pick up it's "redirect to local" settings. Requirements for to recreate the issue. -Create a new test OU and policy. -Create some folder redirection settings, set them to redirect to local upon removal -Remove settings on that GPO -Refresh your view of the GPO and check the settings. -You'll notice that the settings show "not configured" entries for folder redirection. -Enforce this GPO -Create another sub-OU -Create a GPO linked to this sub-ou and configure some folder redirection settings. -Watch as the enforced GPOs "not configured" setting overrides the policy you just defined. I've had to relink the DDP to all OU's that have "block inheritance" enabled, and disable the "enforced" option on the DDP as a workaround. I'd love to re-enable enforcement of the DDP, but until I can erase the traces of folder redirection settings from the DDP, I think I'm stuck.

  Read the article

• (solved) `ssh foo "<command/>"` not loading remote aliases?

  - by TomRoche

  summary: Why does this fail $ ssh foo 'R --version | head -n 1' bash: R: command not found but this succeeds $ ssh foo 'grep -nHe 'bashrc' ~/.bash_profile' /home/me/.bash_profile:3:# source the users .bashrc if it exists /home/me/.bash_profile:4:if [ -f "${HOME}/.bashrc" ] ; then /home/me/.bash_profile:5: source "${HOME}/.bashrc" $ ssh foo 'grep -nHe "\WR\W" ~/.bashrc' /home/me/.bashrc:118:alias R='/share/linux86_64/bin/R' $ ssh foo '/share/linux86_64/bin/R --version | head -n 1' R version 2.14.1 (2011-12-22) ? details: I am a (rootless) user on 2 clusters. One uses environment modules, so any given server on that cluster can provide (via module add) pretty much the same resources. The other cluster, on which I must also unfortunately work, has servers managed individually, so I get in the habit of doing, e.g., EXEC_NAME='whatever' for S in 'foo' 'bar' 'baz' ; do ssh ${SERVER} "${EXEC_NAME} --version" done This works fine for packages installed normally/consistently, but often (for reasons unknown to me) packages are not: e.g. (compare alias below to alias above), $ ssh bar 'R --version | head -n 1' bash: R: command not found $ ssh bar 'grep -nHe 'bashrc' ~/.bash_profile' /home/me/.bash_profile:3:# source the users .bashrc if it exists /home/me/.bash_profile:4:if [ -f "${HOME}/.bashrc" ] ; then /home/me/.bash_profile:5: source "${HOME}/.bashrc" $ ssh bar 'grep -nHe "\WR\W" ~/.bashrc' /home/me/.bashrc:118:alias R='/share/linux/bin/R' $ ssh bar '/share/linux86_64/bin/R --version | head -n 1' R version 2.14.1 (2011-12-22) Using aliases copes well with these install differences when I interactively shell into the server, but fails when I try to script ssh commands (as above); i.e., # interactively $ ssh foo ... foo> R --version calls my alias for R on remote host=foo, but # scripting $ ssh foo 'R --version' doesn't. What do I need to do to make ssh foo "<command/>" load my aliases on the remote host?

  Read the article

• Active Directory FRS problems. 13508 error and other problems

  - by ITPIP

  I have 3 Domain Controllers. We will call them DC1, DC2 and DC3. DC3 and DC2 show Event ID 13508 in their FRS logs with no follow-up event(13509 I think) to say the error had been fixed. DC1's FRS log no matter what you do never shows any events besides FRS service stopped and started. DC1 holds the SYSVOL that needs to be replicated to the other DC's. The other DC's sysvol folders are empty. I have tried the burflag method of fixing this but I haven't had any luck. My procedure for that was to stop all FRS services on all DC's. Then set the burflag on DC1 to D4 and the other two DCs burflag to D2. Started FRS on DC1 and the only event's I see in DC1's FRS event logs are service stopped and service started messages. This fact is leading me to believe that something is wrong on FRS for DC1. I believe there should be events 13553 and 13516 in the FRS event logs after an authoritative sysvol restore. The other two DC's do not have anything in their SYSVOL, otherwise I would have made one of them the authoritative sysvol. DC1 is MS Server 2003 Enterprise Edition SP2 DC2 is MS Server 2003 Standard Edition SP1 DC3 is MS Server 2003 R2 Standard Edition SP2 I did not setup this domain originally but I am now the administrator of it, so I don't have a lot of background on why certain things may have been done in the past. My main goal is to try and fix these issues to get myself better prepared to decommision DC1 and add a DC running Server 2008 to my domain. Thanks.

  Read the article

• Fedora, ssh and sudo

  - by Ricky Robinson

  I have to run a script remotely on several Fedora machines through ssh. Since the script requires root priviliges, I do: $ ssh me@remost_host "sudo touch test_sudo" #just a simple example sudo: no tty present and no askpass program specified The remote machines are configured in such a way that the password for sudo is never asked for. For the above error, the most common fix is to allocate a pseudo-terminal with the -t option in ssh: $ ssh -t me@remost_host "sudo touch test_sudo" sudo: no tty present and no askpass program specified Let's try to force this allocation with -t -t: $ ssh -t -t me@remost_host "sudo touch test_sudo" sudo: no tty present and no askpass program specified Nope, it doesn't work. In /etc/sudoers of course I have this line: #Defaults requiretty ... but I can't manually change it on tens of remote machines. Am I missing something here? Is there an easy fix? EDIT: Here is the sudoers file of a host where ssh me@host "sudo stat ." works. Here is the sudoers file of a host where it doesn't work. EDIT 2: Running tty on a host where it works: $ ssh me@host_ok tty not a tty $ ssh -t me@host_ok tty /dev/pts/12 Connection to host_ok closed. $ ssh -t -t me@host_ok tty /dev/pts/12 Connection to host_ok closed. Now on a host where it doesn't work: $ ssh me@host_ko tty not a tty $ ssh -t me@host_ko tty not a tty Connection to host_ko closed. $ ssh -t -t me@host_ko tty not a tty Connection to host_ko closed.

  Read the article

• Running gdb on Ubuntu 9.10 Apache2 Install

  - by AJ

  Hi all, I am trying to run gdb to debug my Ubuntu 9.10 Apache2 install and having a couple of problems: It seems like the package installed by Ubuntu for Apache2 does not include debugging symbols; is there a different version of the package I should be using for developing/debugging? When I try to run gdb, I get an error that looks to be caused by some missing environment variable. Are there additional options I should pass to "run" to get this to work? Here is the output of the debugger session: root@aj-ubuntu:/usr/sbin# gdb apache2 GNU gdb (GDB) 7.0-ubuntu Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/sbin/apache2...(no debugging symbols found)...done. (gdb) run -X Starting program: /usr/sbin/apache2 -X [Thread debugging using libthread_db enabled] apache2: bad user name ${APACHE_RUN_USER} Program exited with code 01. (gdb) Thanks in advance, -aj

  Read the article

• Viewing a large-resolution VNC server through a small-resolution viewer in Ubuntu

  - by Madiyaan Damha

  I have two Ubuntu computers, one with a large screen resolution (1920x1600) that is running the default Ubuntu VNC server. I have another computer that has a resolution of about 1200x1024 that I use to VNC into the server using the default Ubuntu VNC viewer). Now everything works fine except there are annoying scrollbars in the viewer because the server's desktop resolution is so much higher than the viewer's. Is there a way to: Scale the server's desktop down to the viewer's resolution. I know there will be a loss of image quality, but I am willing to try it out. This should be something like how Windows Media Player or VLC scales down the window (and does some interpolation of pixels). Automatically shrink the resolution of the server to the client's when I connect and scale the resolution back when I disconnect. This seems like a less attractive solution. Any other solution that gurus out there use? I am sure someone has experienced this before (annoying scroll bars) so there must be a solution out there.

  Read the article

• Emails from web site sometimes blank or gibberish

  - by John Gardeniers

  Our company has one web site with an online store based on osCommerce. The system sends emails for various reasons, such as password changes, order confirmations, etc., using PHP's mail() function. We occasionally have customers report that the email they received is either blank (email is plain text format) or gibberish (email is in HTML format). In the latter case it's really just HTML that's being displayed as raw text but of course the customers can't read it. In this case the first opening tag's <, and sometimes a few more characters, has gone missing. In an attempt to determine whether this was happening only for certain customers or email systems I configured the web site to send a CC of each message to a service account at my end. Those CC'd messages always arrive intact and display correctly in Outlook. For what it's worth, it seems to happen a little more frequently to Hotmail users but is certainly not limited to them. As the web site is on a shared (Debian) host there's precious little I can do about debugging things from that end, although if I made the right request I feel the hosting company staff would help me, even though they have limited resources to spend on such matters. Any suggestions on what else I might do to try and determine just why those emails are not being received correctly by some customers, yet a CC copy arrives just fine?

  Read the article

• Stream video file in debian?

  - by Rob

  I've tried ffserver with ffmpeg, I've tried VLC, and I'm not sure what else to try or what I've done wrong. I've gone through, with VLC +-[ robert@s10 ]--[ ~ ] +[#!]¬ vlc --version VLC media player 2.0.0 Twoflower (revision 2.0.0-0-g421a4fc) VLC version 2.0.0 Twoflower (2.0.0-0-g421a4fc) Compiled by buildd on biber.debian.org (Mar 1 2012 22:21:37) Compiler: gcc version 4.6.2 (Debian 4.6.2-14) This program comes with NO WARRANTY, to the extent permitted by law. You may redistribute it under the terms of the GNU General Public License; see the file named COPYING for details. Written by the VideoLAN team; see the AUTHORS file. and tried everything I could in the streaming section, but I can't get the stream to actually work. Looking around, apparently debian strips the encoders from the package? I want to do share some videos I've made with friends on IRC, and it would be easiest if I could just stream it so we can all watch at the same time and critique parts of it in real time. Has anyone done something similar? Linux s10 3.2.0-2-686-pae #1 SMP Tue Mar 20 19:48:26 UTC 2012 i686 GNU/Linux Basic home network, I am behind a NAT (192.168.1.*) and have dynamic DNS set up. That doesn't really matter too much, I can figure that out, but it's not even working locally. I have a file server set up and could just share the files that way, but I'd rather have everyone watching at the same time (or just about). Not worried about installing new packages or building something from source, that's not a big issue, just want to get it working. Big plus if I can do it from command line.

  Read the article

• SSH to VM rejecting password, works from virt-manager console

  - by boundless08

  First of all, I'm sorry if there is a duplicate post somewhere. I searched for a while but none of the posts I found fixed my problem. It's fairly annoying. I created a new VM on our network and when using virt-manager I can log into the VM fine with the username and password. When I try to ssh to the VM from anywhere else it rejects the password, but I know the password is correct. I've even changed it multiple times to make sure its correct. The address I'm ssh'ing to is definitely pointing at the right VM as well, I've tested all this. It's still usable, but the virt-manager console is very limited so the sooner I can get to the bottom of this the better. VM is running ubuntu 12.04 btw. EDIT 1 Checked the auth.log and all I'm getting is "sshd[29304]:Connection closed by 'server.ip.address' [preauth]". I also tried allowing logging in as root, and even turned off password auth altogether in sshd_config and still nothing! I then turned on "AllowEmptyPasswords", still a whole lot of nothing.

  Read the article

• Convert a Linksys WAG54GP2 ADSL router into Access point only to extend my Wifi range

  - by Preet Sangha

  I have a wireless lan running on my ASDL2 connection. The router (Seimens Gigaset sx763) is provided by the ISP and is generally good. However I have couple of dead spots at the far end of the house and since I have my old router sitting in the drawer I thought that I'd try to convert it into simple WAP. However downloading the manual from linksys it seems to be that the manual is from an earlier firmware, but the very first option on the very first page seems promising: Wan Mode: Router or ADSL However after this I'm a bit lost. I know that the wireless card on this box will need a mac address and it must get its address from the master router (I thought static might be best). However the again the manual is out of date I have the option of DHCP: ON or OFF or RELAY I've not even got to the more complex options yet. Question is can this device even work this way (seems like it but I cannot find any docs on it), and if so how? Edit: Having now fiddled around I'm of the opinion that this cannot be done.

  Read the article

• Default route not on LAN

  - by jarmund

  I have a network that in principle looks like this: H1---\ /----Inet1 H2---->---GW1---< H3---/ \----GW2-----Inet2 H1 and H2 = Hosts that need access to internet with GW1 Inet1 = Internet link over 3G connection Inet2 = 5GHz link to Internet (not always up) GW1 = Works as a router, automatically picking the "best" connection between Inet1 and Inet2 (the latter via GW2). GW2 = 5GHz wifi router And here's the problem: H3 only needs internet access when Inet2 is up. What i was thinking of doing was a routing table that looks like this: route to GW2 via GW1 default route is via GW2 I first set the route to GW2 via GW1 without a problem. But when i try route add default gw 1.2.3.4 (1.2.3.4 being the IP of GW2), it complains "SIOCADDRT: No such device" Is the problem that the default gw i'm trying to set is not reachable directly? Is there a different approach that would allow me to achieve this? An alternative (and hypothetical) approach: Since H3 will be using a static IP, is it possible to do some magic with iptables on GW1 to forward any packets from H3 to GW3, thereby "tricking" H3 into using GW2 as its default router?

  Read the article

• Is my HDD dead forever?

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken and it couldn't be recognized by the BIOS. I have another of the same hard drive, so I exchanged the boards. I found out that there is a problem on its board since my good hard drive didn't work. But the broken hard drive doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hard drive is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hard drive but with the wrong size (2TB). I try to make it read the hard drive but it got an I/O error reading sector. It tries to read, the hard drive spins up. So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do to recover the files from it?

  Read the article

• Makecert.exe hangs

  - by Robert

  I was following the steps in Scott Hanselman's blog post describing how to create a certificate authority and code signing certificate for PowerShell scripts. Initially, I created the certificate authority and a personal certifcate and used it to sign a powershell script successfully. All went as described in the blog post. The problem starts (as most do) when I did something that was (probably) stupid, although it seemed reasonable at the time. I wanted to start over and repeat the process again with a clean slate, so from the mmc certificates snap-in console, I deleted the personal certificate and the certificate authority I created previously. After that any time I try to use makecert, (just as I did the first time around), makecert either hangs or faults (which prompts to end or debug). Did I hose something up by deleting via the certificates snap-in? It didn't complain or warn me that it could be potentially hazardous. Is this just coincidence and something else entirely could be hosed? I have Event Log entries from the times when makecert crashed, which all look very similar; here is one: Log Name: Application Source: Application Error Date: 8/5/2009 3:55:04 PM Event ID: 1000 Task Category: (100) Level: Error Description: Faulting application makecert.exe, version 6.0.6000.16384, time stamp 0x4545910b, faulting module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03821, exception code 0xc0000005, fault offset 0x00067409, process id 0xe58, application start time 0x01ca160efdf30625. Anyone have any ideas as to what exactly caused this and/or what I can do to fix it. I'm on 32-bit Vista Enterprise w/SP2.

  Read the article

• can't access SATA card config screen on boot, nor access the disks

  - by Ronald

  We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

  Read the article

• Windows Remote Desktop (RDP/MSTSC) fails with Error Code: 5

  - by BryCoBat

  I have 2 Windows XP boxen: A (running XP SP3) and B (running XP SP2). I'm using Remote Desktop to connect from A to B. When I connect, I get the login screen (which is slow to respond to keyboard/mouse input), and after logging in, I get the following: Fatal Error (Error Code: 5) Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. I've seen one way to (sometimes) get in by opening a second RDP session to the same box [1], and if I wait long enough sometimes it will go ahead and log in anyway. Is there something broken/missing on the PC I'm trying to remote in to? Edited in reply to djangofan: There's nobody listed under "Lock pages in memory". When the double login trick works, a glance at Task Manager shows plenty of free memory, 800MB available out of 1.5 GB. (Performance tab, Physical memory) For what it's worth, this happens consistently after a reboot. What sort of exact info would be useful? There's very little remaining installed on that machine that's not Windows + Office... [1] found at http://www.fdcservers.net/vbulletin/archive/index.php/t-1580.html

  Read the article

• Nexus 1000v VEM fails on 2 out of 8 hosts.

  - by cougar694u

  I have 8 ESXi hosts. I do a fresh install from the installable CD directly to 4u1. We have another 2-node cluster with a working Nexus 1000v primary & secondary. Everything's up and running. I installed 6 hosts and everything worked great, migrated them to the Nexus DVS, and VUM installed the modules. I did the 7th host, and when I tried to migrate it to the DVS, it failed with the following error: Cannot complete a Distributed Virtual Switch operation for one or more host memebers. DVS Operation failed on host , error durring the configuration of the host: create dvswitch failed with the following error message: SysinfoException: Node (VSI_NODE_net_create) ; Status(bad0003)= Not found ; Message = Instance(0): Inpute(3) DvsPortset-0 256 cisco_nexus_1000v got (vim.fault.PlatformConfigFault) exception Then, I tried to do host 8, and got the exact same problem. It worked about 15 minutes prior when I did host 6, nothing changed, then went to host 7 and it failed. If I try to remediate either of these two hosts, either patches or extensions, it fails. Anyone else have these problems?

  Read the article

• Install Python setuptools on CentOS 6

  - by Ivan

  I'm trying to install setuptools with no success so far. When I do python3.3 ez_setup.py I get the following error: Extracting in /tmp/tmp6nn4cz Traceback (most recent call last): File "ez_setup.py", line 370, in <module> sys.exit(main()) File "ez_setup.py", line 367, in main return _install(tarball, _build_install_args(options)) File "ez_setup.py", line 55, in _install tar = tarfile.open(tarball) File "/usr/local/lib/python3.3/tarfile.py", line 1571, in open raise ReadError("file could not be opened successfully") tarfile.ReadError: file could not be opened successfully I've been reading and it seems that zlib-devel was not installed when the python installation was done. However, I did uncomment line 358 on Modules/Setup to enable zlib before compiling and if I try to import zlib on python3.3 console it works. Also, in case it helps, here is the ldd python3.3: # ldd `which python3.3` linux-vdso.so.1 => (0x00007fff79fda000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00002b96092da000) libdl.so.2 => /lib64/libdl.so.2 (0x00002b96094f6000) libutil.so.1 => /lib64/libutil.so.1 (0x00002b96096fa000) libz.so.1 => /lib64/libz.so.1 (0x00002b96098fe000) libm.so.6 => /lib64/libm.so.6 (0x00002b9609b12000) libc.so.6 => /lib64/libc.so.6 (0x00002b9609d95000) /lib64/ld-linux-x86-64.so.2 (0x00002b96090bc000) What can I do?

  Read the article

• CheckPoint/Amazon VPC VPN tunnel working inconsistently

  - by Lee

  First time poster, so please be gentle and correct me if there's Server Fault etiquette I'm missing. We have two CheckPoint edge devices at sites A & B, independently managed, connecting to two Amazon private clouds. In both cases, the two Amazon VPCs are in the same community on the CheckPoint device. A VPN tunnel exists between the two CheckPoint devices as well. Between Sites A & B and the Amazon VPC in Northern Virigina, we are unable to keep more than one tunnel up. Both will come up, but tunnel 2 will drop an hour after initiation and will not come back up while tunnel 1 is up. We believe the 1-hour period is due to IPsec phase 2 renegotiation, but can't be sure. On our side, we see the tunnel 2 remote endpoint as not responding to phase 2 negotiation. Between Sites A & B and the Amazon VPC in Oregon, we have no issues. Both tunnels are up and fail over properly. The CheckPoint gateways are using domain-based VPNs. According to CheckPoint's advice to Amazon, this won't work. Yet, in Oregon, it does. We've pursued this with Amazon and, despite the fact it's working in Oregon, they've refused to troubleshoot with us further. Can anyone suggest anything we can do to try to get this stabilized? Going to route-based VPNs is not an option for us.

  Read the article

• Unable to login to Amazon EC2 compute server

  - by MasterGaurav

  I am unable to login to the EC2 server. Here's the log of the connection-attempt: $ ssh -v -i ec2-key-incoleg-x002.pem [email protected] OpenSSH_5.6p1, OpenSSL 0.9.8p 16 Nov 2010 debug1: Reading configuration data /home/gvaish/.ssh/config debug1: Applying options for * debug1: Connecting to ec2-50-16-0-207.compute-1.amazonaws.com [50.16.0.207] port 22. debug1: Connection established. debug1: identity file ec2-key-incoleg-x002.pem type -1 debug1: identity file ec2-key-incoleg-x002.pem-cert type -1 debug1: identity file /home/gvaish/.ssh/id_rsa type -1 debug1: identity file /home/gvaish/.ssh/id_rsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'ec2-50-16-0-207.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/gvaish/.ssh/known_hosts:8 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: ec2-key-incoleg-x002.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey debug1: Trying private key: /home/gvaish/.ssh/id_rsa debug1: No more authentication methods to try. Permission denied (publickey). What can be the possible reason? How do I fix the issue?

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

< Previous Page | 920 921 922 923 924 925 926 927 928 929 930 931  | Next Page >