Search Results

Search found 65206 results on 2609 pages for 'real time'.

Page 926/2609 | < Previous Page | 922 923 924 925 926 927 928 929 930 931 932 933  | Next Page >

• where is memory gone (no, not buffers or cache)

  - by Marki

  can anyone tell me where the memory is gone: (no, this time neither buffers nor cache) # free total used free shared buffers cached Mem: 3928200 3868560 59640 0 2888 92924 -/+ buffers/cache: 3772748 155452 Swap: 4192956 226352 3966604 top, sorted by memory, descending: top - 13:42:06 up 1 day, 3:47, 2 users, load average: 0.08, 0.12, 0.36 Tasks: 228 total, 1 running, 227 sleeping, 0 stopped, 0 zombie Cpu0 : 2.0%us, 4.0%sy, 0.0%ni, 90.1%id, 0.0%wa, 0.0%hi, 4.0%si, 0.0%st Cpu1 : 0.0%us, 0.0%sy, 0.0%ni, 0.0%id,100.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3928200k total, 3868020k used, 60180k free, 2896k buffers Swap: 4192956k total, 226048k used, 3966908k free, 82068k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3863 root 20 0 902m 199m 3296 S 7 5.2 99:08.77 ndsd 21906 root 20 0 138m 9076 2988 S 0 0.2 0:00.02 sfcbd 2332 root 20 0 126m 4660 1332 S 0 0.1 0:17.72 mono 4243 wwwrun 20 0 683m 4468 668 S 0 0.1 0:07.38 java 2994 root 20 0 202m 2288 1660 S 0 0.1 6:10.02 httpstkd 4338 root 20 0 184m 2240 1112 S 0 0.1 0:00.52 namcd 21898 root 20 0 32368 1832 1256 R 1 0.0 0:00.08 top In fact, some time ago oom kicked in and crashed the system (kernel panic), and I'm afraid we're again not far from that point.... UPDATE # cat /proc/meminfo MemTotal: 3928200 kB MemFree: 51336 kB Buffers: 2964 kB Cached: 72876 kB SwapCached: 29128 kB Active: 233440 kB Inactive: 88040 kB Active(anon): 188920 kB Inactive(anon): 56752 kB Active(file): 44520 kB Inactive(file): 31288 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 4192956 kB SwapFree: 3966824 kB Dirty: 32 kB Writeback: 0 kB AnonPages: 225112 kB Mapped: 11356 kB Shmem: 32 kB Slab: 1624080 kB SReclaimable: 13740 kB SUnreclaim: 1610340 kB KernelStack: 4176 kB PageTables: 10500 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 6157056 kB Committed_AS: 2397684 kB VmallocTotal: 34359738367 kB VmallocUsed: 441372 kB VmallocChunk: 34359246755 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 10240 kB DirectMap2M: 4184064 kB slabtop Active / Total Objects (% used) : 9041019 / 9207548 (98.2%) Active / Total Slabs (% used) : 401132 / 401156 (100.0%) Active / Total Caches (% used) : 91 / 159 (57.2%) Active / Total Size (% used) : 1491537.88K / 1519791.56K (98.1%) Minimum / Average / Maximum Object : 0.02K / 0.17K / 4096.00K OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 4240470 4240319 99% 0.12K 141349 30 565396K pid 2245140 2219675 98% 0.25K 149676 15 598704K size-256 2238090 2210087 98% 0.12K 74603 30 298412K size-128 ...

  Read the article

• 613 threads limit on debian

  - by Joel

  When running this program thread-limit.c on my dedicated debian server, the output says that my system can't create more than around 600 threads. I need to create more threads, and fix my system misconfiguration. Here are a few informations about my dedicated server: de801:/# uname -a Linux de801.ispfr.net 2.6.18-028stab085.5 #1 SMP Thu Apr 14 15:06:33 MSD 2011 x86_64 GNU/Linux de801:/# java -version java version "1.6.0_26" Java(TM) SE Runtime Environment (build 1.6.0_26-b03) Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode) de801:/# ldd $(which java) linux-vdso.so.1 => (0x00007fffbc3fd000) libpthread.so.0 => /lib/libpthread.so.0 (0x00002af013225000) libjli.so => /usr/lib/jvm/java-6-sun-1.6.0.26/jre/bin/../lib/amd64/jli/libjli.so (0x00002af013441000) libdl.so.2 => /lib/libdl.so.2 (0x00002af01354b000) libc.so.6 => /lib/libc.so.6 (0x00002af013750000) /lib64/ld-linux-x86-64.so.2 (0x00002af013008000) de801:/# cat /proc/sys/kernel/threads-max 1589248 de801:/# ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 794624 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 10240 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 128 cpu time (seconds, -t) unlimited max user processes (-u) unlimited virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Here is the output of the C program de801:/test# ./thread-limit Creating threads ... Address of c = 1061520 KB Address of c = 1081300 KB Address of c = 1080904 KB Address of c = 1081168 KB Address of c = 1080508 KB Address of c = 1080640 KB Address of c = 1081432 KB Address of c = 1081036 KB Address of c = 1080772 KB 100 threads so far ... 200 threads so far ... 300 threads so far ... 400 threads so far ... 500 threads so far ... 600 threads so far ... Failed with return code 12 creating thread 637. Any ideas how to fix this please ?

  Read the article

• Identifying mail account used in CRAM-MD5 transaction

  - by ManiacZX

  I suppose this is one of those where the tool for identifying the problem is also the tool used for taking advantage of it. I have a mail server that I am seeing emails that spam is being sent through it. It is not an open relay, the messages in question are being sent by someone authenticating to the smtp with CRAM-MD5. However, the logs only capture the actual data passed, which has been hashed so I cannot see what user account is being used. My suspicion is a simple username/password combo or a user account's password has otherwise been compromised, but I cannot do much about it without knowing what user it is. Of course I can block the IP that is doing it, but that doesn't fix the real problem. I have both the CRAM-MD5 Base64 challenge string and the hashed client auth string containing the username, password and challenge string. I am looking for a way to either reverse this (which I haven't been able to find any information on) or otherwise I suppose I need a dictionary attack tool designed for CRAM-MD5 to run through two lists, one for username and one for password and the constant of the challenge string until it finds a matching result of the authentication string I have logged. Any information on reversing using the data I have logged, a tool to identify it or any alternative methods you have used for this situation would be greatly appreciated.

  Read the article

• Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

  - by MasterRoot24

  I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

  Read the article

• Jboss unreachable/ slow behind apache with ajp

  - by Niels

  I have an linux server running with a JBoss Instance with apache2. Apache2 will use AJP connection to reverse proxy to JBoss. I found these messages in the apache error.log: [error] (70007)The timeout specified has expired: ajp_ilink_receive() can't receive header [error] ajp_read_header: ajp_ilink_receive failed [error] (120006)APR does not understand this error code: proxy: read response failed from 8.8.8.8:8009 (hostname) [error] (111)Connection refused: proxy: AJP: attempt to connect to 8.8.8.8:8009 (hostname) failed [error] ap_proxy_connect_backend disabling worker for (hostname) [error] proxy: AJP: failed to make connection to backend: hostname [error] proxy: AJP: disabled connection for (hostname)25 I googled around but I can't seem to find any related topics. There are people say this behavior can be caused by misconfigured apache vs jboss. Telling the max amount of connections apache allows are far greater then jboss, causing the apache connection to time out. But I know the app isn't used by thousands of simultaneous connections at the time not even hundreds of connections so I don't believe this could be a cause. Does anybody have an idea? Or could tell me how to debug this problem? I'm using these versions: Debian 4.3.5-4 64Bit Apache Version 2.2.16 JBOSS Version 4.2.3.GA Thanks

  Read the article

• Apache doesn't immediately notice a change in the document root

  - by Tom

  We use capistrano for website deployments and our Apache document root is a symlink to a particular code release. The deployment procedure switches the symlink from the old release to the new release as the final step of the deployment. We are migrating our webservers from real servers running RHEL 5.6 to Amazon EC2 virtual machines running Ubuntu 11.10 and the new servers are suffering from a problem where Apache doesn't immediately notice the change to it's document root when the symlink is switched. It can take a second or so (and I think I've even seen it take a couple of minutes). It's kind of like Apache has cached the physical path of the symlink for some time. Does anyone know some Apache settings I could look at to get it to "scan" for changes to it's served files quicker. Thoughts: I read that the disks on virtual machines are much slower (since they are network attached storage). Perhaps the filesystem cache somehow works differently too? If so, is there anything that can be done? The website runs PHP code. Perhaps there is some PHP config differences between RHEL and Ubuntu? I checked realpath_cache_ttl but both servers have it commented out: e.g. ; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; http://www.php.net/manual/en/ini.core.php#ini.realpath-cache-ttl ;realpath_cache_ttl = 120 We do use the APC opcode cache but don't think it's the issue due to experimentation. The PHP code is in different file paths for each deployment and we ensure stat=1. Here is a similar question that is very interesting: 294107 - but doesn't provide an answer for me. One solution would be to reload Apache everytime we modify the document root symlink. I'll do this if we can't find another solution.

  Read the article

• Idle state detection for server

  - by odinmillion

  Windows OS has a service that detects idle state. Details: Task Idle Conditions The computer is considered idle if all the processors and all the disks were idle for more than 90% of the past 15 minutes and if there is no keyboard or mouse input during this period of time. When the Task Scheduler service detects that the computer is idle, the service only waits for user input to mark the end of the idle state. It is very useful for usual PCs that have keyboard amd mouse. We can use standard task scheduler to start some process like defrag when PC in idle state and stop when PC isn't in idle state. But what should we use when we using a standalone server without keyboard and mouse? Server sometimes receives commands by TCP/IP and starts CPU and HDD activity. But sometimes CPU and HDD activity at zero level. I would like to use this periods of time to start defrag or another process. But this started at "idle" state processes should be terminated when another commands will appear. So, standard idle state conditions cant help me because we have not got user input to stop idle state. I need more customizable idle state detector. Automatically started processes shouldn't influence to idle state, but PC should go away from idle state when another process will apperar. What should I use? Maybe exists some advansed task scheduler? Or I should write some useful utility on C#? I hope that it is a standard task and all useful utilities already compiled :)

  Read the article

• Hard drive failed, suspected filesystem corruption, still cannot salvage any data from harddrive

  - by Hippy-Head

  Firstly, I am terribly sorry if this is a duplicate, but I couldn't find a similar issue to mine, so here goes. I have a 1TB hdd bought around 8 months ago used as backup hard drive. I have not used the drive for a period of time whatsoever, and when I was trying to get back to some files on it, it was completely wiped just like that. At first it would not boot I tried everything from command line chkdsk and filesystem recovery software to rebuilt it. After a few attempts I managed to initialize it, at that time it was an achievement. The problems started when I tried to recover the data inside, I have used A LOT of software free and commercial software on both Mac and Windows, with the help of cmd or Terminal commands, however no data of any kind was recovered, even after leaving it thoroughly scan for around 9-10 hours all night sometimes longer, with no results at all. I am somewhat desperate, I am usually good at retrieving data from corrupt hard drives, but this is not the case. Call me paranoid, but I do not want to give it to someone to fix it for me, as I have a lot of photos and personal stuff that I do not want anyone to see.

  Read the article

• The physical working paradigm of a signal passing on wire.

  - by smwikipedia

  Hi, This may be more a question of physics, so pardon me if there's any inconvenience. When I study computer networks, I often read something like this in order to represent a signal, we place some voltage on one end of the wire and the other end will detect the voltage and thus the signal. So I am wondering how a signal exactly passes through wire? Here's my current understanding based on my formal knowledge about electronics: First we need a close circuit to constrain/hold the electronic field. When we place a voltage at somewhere A of the circuit, electronic field will start to build up within the circuit medium, this process should be as fast as light speed. And as the electronic field is being built up, the electrons within the circuit medium are moved, and thus electronic current occurs, and once the electronic current is strong enough to be detected at somewhere else B on the complete circuit, then B knows about what has happend at A and thus communication between A and B is achieved. The above is only talking about the process of sending a single voltage through wire. If there's a bitstream and we need to send a series of voltages, I am not sure which of the following is true: The 2nd voltage should only be sent from A after the 1st voltage has been detected at B, the time interval is time needed to stimulate the electronic field in the medium and form a detectable electronic current at B. Several different voltages could be sent on wire one by one, different electronic current values will exists along the wire simutaneously and arrive at B successively. I hope I made myself clear and someone else has ever pondered this question. (I tag this question with network cause I don't know if there's a better option.) Thanks, Sam

  Read the article

• DisableCrossAccountCopy not working on some Outlook installs, working on others, both going against Exchange

  - by MikeBaz

  As part of a mail migration project from one Exchange organization to another, we need to be able to prevent users from moving/copying messages between their accounts in each organization. (Yes, users will think this is evil; no, it's not my decision; yes, users will hate us.) Luckily, we thought, Outlook 2010 provides the DisableCrossAccountCopy registry value/policy (cf. http://technet.microsoft.com/en-us/library/ff800883.aspx). (Because you can't do multiple Exchange organizations in a single profile before Outlook 2010, this only matters on Outlook 2010. Yes, I'm ignoring for the sake of this question copy/move to/from the filesystem.) In our test lab, in a test forest with a test Exchange organization, with a second Exchange account added to the profile in either of the "real" Exchange organizations, with the value set to "*", everything works as expected. On a workstation in one of the production domains, however, the setting does not seem to work. We have tried it under HKCU, HKLM, HKCU\Software\Policies, and HKLM\Software\Policies. It simply seems to be ignored. The value was set in the OCT on a test machine, but the OCT (and the ADM/ADMX file) have the wrong type for the value. We have located the value in the registry and removed it everywhere it is found, we think, and put it back in HKCU, but it still isn't taking. At the moment, a clean Outlook install is not an option - even if it was, we at this point would need to know what to do to fix the pushed copy (I didn't push the copy out to thousands of machines, I've just been asked to help clean up the current mess). Thoughts?

  Read the article

• Large mailbox in Outlook 2007 takes ages to index

  - by Reado

  In our company each user has a single mailbox and all email they have ever sent/received is in that mailbox. We don't do archiving to PST and we thought that was the way forward. The problem we now have is if someone switches to another PC for the day and opens Outlook, it has to download all emails first to that PC (cached mode) but even then when they try to search for something, Outlook says items are still being indexed. One user has over 100,000 items to be indexed and it's been saying that for about a week! As a temporary workaround I have turned off instant searching which allows them to search for anything, but it takes time to filter through, and Outlook doesn't exactly indicate if it's still searching for something, so in most cases the user thinks the search isn't working when really it is and it's just taking time to populate the results. I need a solution that allows the mailbox to be indexed really quickly if the user has to login to another PC. Are we best using Online Mode instead of Cached Mode or is there another way around this? Thanks in advance.

  Read the article

• Intel Rapid Storage Technology (pre-OS) driver installation

  - by Nero theZero

  My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

  Read the article

• Repairing Damage to VMWare Virtual Disk

  - by Lachlan McDonald

  Evening all, I've got a considerable problem I'm hoping to get some resolution on. I had two VMWare 6.5 virtual machines, one running Ubuntu 9.10 and the other Ubuntu 10.04. I used 9.10 as a testing server, so I could install a LAMP environment to prepare some code. Over the months I took a number of snapshots of this VM just in case something went wrong, and did a full copy of the entire VM a month ago. I created the 10.04 VM when Lucid Lynx launched so I could continue development on a fresh install. To get the files over, I simply added the 9.10 virtual disk into the 10.04 VM, grabbed some of the files I needed, and dismounted it. Unknown to me at the time, the changes to the 9.04 virtual disk meant that I could no longer boot it with the 9.10 VM. I'd always get the "The parent virtual disk has been modified since the child was created." error. I decided this was a good time to backup all the critical files, but now whenever I open the 9.04 disk to get the data it isn't in the same state as it was earlier. My question is; is it possible when I'm mounting the virtual disk that I'm not seeing the most recent snapshot, or in my blundering, have I lost the virtual disk. Cheers

  Read the article

• Is it possible to be a professional studying on your own?

  - by Marc Jr

  I read economics at university(nothing to see with linux, isn't it? :P). I have some basic knowledge about booting process, Linux Kernel compiling from source and stuff like that. But of course I have still much to learn sometimes some errors appears and "voila" I am lost. I had: Ubuntu, Fedora, OpenSuse, Arch.. using Gentoo now. I'd like to know what you linux users, professionals, administrators... would think it is the best way to learn linux in a professional way. Is it worth studying it and passing the LPIC test enough to work in the linux world? or do I need going to IT uni? I've heard LFS is a good way of learning about linux, is that real? I've been thinking about getting to LFS learn about more deeply about the linux process and learning scripts. It is possible to do this way? if anyone has a tip or a good way of doing, maybe someone did it. Any tip is very welcome. Words from a person in love with linux. :D The best, Marc

  Read the article

• OS X 10.6 Apply ipfw rules at startup

  - by Michael Irey

  I have a couple of firewall rules I would to like to apply at startup. I have followed the instructions from http://images.apple.com/support/security/guides/docs/SnowLeopard_Security_Config_v10.6.pdf On page 192. However, the rules do not get applied at startup. I am running 10.6.8 NON Server Edition. I can however run: (Which applies the rules correctly) sudo ipfw /etc/ipfw.conf Which results in: 00100 fwd 127.0.0.1,8080 tcp from any to any dst-port 80 in 00200 fwd 127.0.0.1,8443 tcp from any to any dst-port 443 in 65535 allow ip from any to any Here is my /etc/ipfw.conf # To get real 80 and 443 while loading vagrant vbox add fwd localhost,8080 tcp from any to any 80 in add fwd localhost,8443 tcp from any to any 443 in Here is my /Library/LaunchDaemons/ipfw.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>ipfw</string> <key>Program</key> <string>/sbin/ipfw</string> <key>ProgramArguments</key> <array> <string>/sbin/ipfw</string> <string>/etc/ipfw.conf</string> </array> <key>RunAtLoad</key> <true /> </dict> </plist> The permissions of all the files seem to be appropriate: -rw-rw-r-- 1 root wheel 151 Oct 11 14:11 /etc/ipfw.conf -rw-rw-r-- 1 root wheel 438 Oct 11 14:09 /Library/LaunchDaemons/ipfw.plist Any thoughts or ideas on what could be wrong would be very helpful!

  Read the article

• How to prevent nginx from locking files on mounted samba partition in Centos 6

  - by Bruce Kirkpatrick

  I'm using nginx 1.3.8 inside a centos 6.3 virtualbox 4.2.4 virtual machine. The system is running the latest software available via yum update. The host OS is windows 7. The site files nginx is serving are on mounted samba partition, which is a folder on the host Windows system. I.e., inside linux, nginx paths are referring to /home/vhosts and this is mounted from D:\vhosts\ on windows. The samba partition is mounted as root with 777 privileges. /etc/fstab looks like this, but with real ip, username, password: //hostip/vhosts /home/vhosts cifs username=username,password=SECRETPASSWORD,uid=root,gid=root,file_mode=0777,dir_mode=0777,rw,_netdev 0 0 I.e. linux/nginx reads from the windows share, and not the opposite. in /etc/samba/smb.conf, I have tried to disable all samba locking features, but it seems to have no effect even after rebooting the virtual machine. locking=no share modes=no oplocks = no level2 oplocks = no kernel oplocks =no I'm receiving "Access is denied" errors in Windows or linux when attempting to overwrite the javascript file in windows that has been accessed at least once with nginx. If I run "service nginx reload", the lock is removed and I'm able to save the file. That's why I think it is nginx causing the lock. The same problem occurs with directories. However, that may be a different issue not related to the use of samba. I'm using samba so that I can manage the source code outside of the virtual machine. Also note that after I run "service nginx reload", the file I'm editing is actually automatically deleted from the windows host. SOLVED: I just reviewed my nginx.conf file. It appears the "open_file_cache" feature is what is causing the lock and deleted files. When I set this option to open_file_cache off;, My problem is resolved. I will repost as the answer when it allows me to do so.

  Read the article

• OS X mouse pointer speed varies with different mouse

  - by Stan

  OS X Snow Leopard It seems that when using different mice on OS X may have different pointer speed and scrolling speed. For example, when using my Logitech basic laser mouse, the pointer speed is like normal. But when using MX Performance or Anywhere, it's very slow, I will have to adjust the pointer speed in mouse configuration to max. Even with max, it's still a bit slow. Basically, just feel the plug and play on OS X is terrible. I need re-adapt to it every single time. This is not the case on Windows OS. Also, the mouse scrolling speed varies with different mouse too. But usually they are all very slow, usually scroll 1 line at a time. If I adjust it in mouse configuration, it turns to scroll too much lines. I have Logitech official mouse driver (LCC) installed. But either tuning in LCC or mouse configuration doesn't make things better. Has anyone have similar issue? How to resolve it? Please advise, thanks.

  Read the article

• Odd IIS FTP Failure

  - by Monkey Boson

  We're running a script on our production box that zips up our database and FTPs it to a backup box every night. Our production box is running Redhat Enterprise 5. Our backup box is running Windows XP Pro / IIS 5.1. Both machines are on the same VLAN (not sure if this is imporatant). The backup file usually clocks in at around 3GB. Every now and again (~5% of the time), the backup script fails. The shell script on the "client side" - which looks at return codes - never identifies any problem since ftp always returns 0. On the "server side", IIS writes out a log that looks like this: #Software: Microsoft Internet Information Services 5.1 #Version: 1.0 #Date: 2009-08-08 07:04:25 #Fields: time c-ip cs-method cs-uri-stem sc-status sc-win32-status 07:04:25 192.168.111.235 [15]USER backup 331 0 07:04:25 192.168.111.235 [15]PASS - 230 0 07:05:54 192.168.111.235 [15]created backup_20090808.zip 426 10035 07:06:16 192.168.111.235 [15]QUIT - 426 0 Now, I know that 426 means "Connection closed, transfer aborted", which is sort-of a catch-all for "IIS was not happy". The real puzzler is the wincode: 10035 (WSAEWOULDBLOCK -- Resource temporarily unavailable). My understanding is that this code is normal when using non-blocking socket calls - which would almost certainly be used by any FTP Server implementation. My first guess that it might be a timeout issue doesn't make sense, since we're only talking about a few minutes here and the timeout was left at the default 900 s. Does anybody have any ideas about what is causing this problem, and how it may be fixed? Thanks!

  Read the article

• Alternate way to connect a vpn through a MIFI

  - by questor

  This has gotten to be a major problem at our company and depending on who I ask, the problem either does not really exist (mfr. and vendor) or is insoluble ( according to most users including techs who know how to prove their point). The problem involves getting a normal Windows 7 system to connect to a normal Server 2008 R2 Server over a cellular router (usually called a Mifi). A very few brands/models appear to work but the majority cannot make the connection. Since it is a cellular device, there are many variables that come into play and I wondered if anyone had ever found a consistent way to either make one work or else prove to the providers that their equipment was at fault. They all specifically state “VPN use” on the sales brochures. But few if any work. And those that do are not reliable. From a standpoint of pure knowledge, I just wondered if anyone knew the real reason why they fail? Pptp, L2tp, IPsec doesn’t matter. I have not tried Shrew or OpenVPN and am using strictly MS Windows protocols. Plenty of Google Searches back up my complaints but none seem to be any closer to knowing "why" they fail, just that they do. This is a "quest for knowledge"question. I don't expect a solution. Just a reason for the problem if anyone has any ideas.

  Read the article

• DHCP Server on local machine

  - by EralpB

  Hello I am trying to setup a dhcp3-server on Ubuntu. But my question is more generic, if dhcp server is in a blockbox and all clients are connected to it I think I get what is going on but when dhcp server is installed on one of the "clients" that confuses me. When I send a dhcp packet from that client to the dhcp server, will my ethernet card read and write at the same time? Or will it handle it internally without writing any data to ethernet cable. It's the first time I am encountering these network things so I am a little bit confused. Also I wonder If I am in a big network with lan IP let's say 192.168.0.100 and I install a dhcp server to my computer, can any other computers accidentally get IP from my dhcp server? Every computer has one ethernet card (if that matters?). And every computer is connected to one router. I guess the answer is no because the broadcast message won't reach to my computer since when router receives a dhcp search packet it will answer and it won't let other computers know about it because they don't need to. And without router sending that packet one by one, it cannot travel further. I'd be glad if someone enlightens me. Thank you very much.

  Read the article

• What determines what resolutions a laptop is willing to output over VGA?

  - by Joshua McKinnon

  I'm responsible for several conference rooms and have setup 1080p projectors and I provide both HDMI and VGA connectivity. HDMI for DisplayPort and Mini-DisplayPort, and VGA as a fallback, universal option. Contrary to what I expected, people seem to have much more trouble with the HDMI than VGA, so VGA gets used a lot more than you'd think (even as most workstation laptops made in the last 3-4 years have DisplayPort or Mini-DisplayPort...). Also to my surprise, VGA outputs over 1080p on a 50ft cable run with very minimal degradation on certain laptops - other laptops just don't offer 1080p as a resolution choice and top out at 1600x1200 or something else. Specific example: a ThinkPad W530 will do 1080p, a W520 won't, over VGA. (both do 1080p over displayport/mini-DP) What determines what resolutions a laptop is willing to output over VGA? I'm thinking this will come down to either a video driver that says it supports only certain resolutions for output, or limitations of the RAMDAC (which wouldn't be in play, at least DAC wise, on a digital output, but WOULD on VGA, an analog output). The basic reason for the question is that I noticed, say, a ThinkPad W520 with 1080p built in display, will output 1080p fine over DisplayPort to a 1080p projector, but will cap out at 1600x1200 (practically the same pixel count, just a little shy) on VGA. Now, this wouldn't be surprising at all except SOME laptops have no issue outputting 1080p over VGA, even with lower native resolutions. Why do I care? Well if there's some way I could enable it... for situations where my users end up using VGA anyway, it's preferable for display mirroring if they can output their laptop's native resolution, which, you guessed it, is very often 1080p on 15" models. DISCLAIMER: This is primarily a curiosity, I'm not claiming 1080p over VGA is ideal by any means, but hey, if it works. I've seen HDMI start artifacting more over same-length, same gauge cabling (up to 50' run in certain rooms). If you think this is better suited to SuperUser, please move it, but this is framed from an IT standpoint of something that affects a real pool of users in a multiple conference room, 50+ deployed laptop scenario.

  Read the article

• Async ignored on AJAX requests on Nginx server

  - by eComEvo

  Despite sending an async request to the server over AJAX, the server will not respond until the previous unrelated request has finished. The following code is only broken in this way on Nginx, but runs perfectly on Apache. This call will start a background process and it waits for it to complete so it can display the final result. $.ajax({ type: 'GET', async: true, url: $(this).data('route'), data: $('input[name=data]').val(), dataType: 'json', success: function (data) { /* do stuff */} error: function (data) { /* handle errors */} }); The below is called after the above, which on Apache requires 100ms to execute and repeats itself, showing progress for data being written in the background: checkStatusInterval = setInterval(function () { $.ajax({ type: 'GET', async: false, cache: false, url: '/process-status?process=' + currentElement.attr('id'), dataType: 'json', success: function (data) { /* update progress bar and status message */ } }); }, 1000); Unfortunately, when this script is run from nginx, the above progress request never even finishes a single request until the first AJAX request that sent the data is done. If I change the async to TRUE in the above, it executes one every interval, but none of them complete until that very first AJAX request finishes. Here is the main nginx conf file: #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; server_names_hash_bucket_size 64; # configure temporary paths # nginx is started with param -p, setting nginx path to serverpack installdir fastcgi_temp_path temp/fastcgi; uwsgi_temp_path temp/uwsgi; scgi_temp_path temp/scgi; client_body_temp_path temp/client-body 1 2; proxy_temp_path temp/proxy; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; # Sendfile copies data between one FD and other from within the kernel. # More efficient than read() + write(), since the requires transferring data to and from the user space. sendfile on; # Tcp_nopush causes nginx to attempt to send its HTTP response head in one packet, # instead of using partial frames. This is useful for prepending headers before calling sendfile, # or for throughput optimization. tcp_nopush on; # don't buffer data-sends (disable Nagle algorithm). Good for sending frequent small bursts of data in real time. tcp_nodelay on; types_hash_max_size 2048; # Timeout for keep-alive connections. Server will close connections after this time. keepalive_timeout 90; # Number of requests a client can make over the keep-alive connection. This is set high for testing. keepalive_requests 100000; # allow the server to close the connection after a client stops responding. Frees up socket-associated memory. reset_timedout_connection on; # send the client a "request timed out" if the body is not loaded by this time. Default 60. client_header_timeout 20; client_body_timeout 60; # If the client stops reading data, free up the stale client connection after this much time. Default 60. send_timeout 60; # Size Limits client_body_buffer_size 64k; client_header_buffer_size 4k; client_max_body_size 8M; # FastCGI fastcgi_connect_timeout 60; fastcgi_send_timeout 120; fastcgi_read_timeout 300; # default: 60 secs; when step debugging with XDEBUG, you need to increase this value fastcgi_buffer_size 64k; fastcgi_buffers 4 64k; fastcgi_busy_buffers_size 128k; fastcgi_temp_file_write_size 128k; # Caches information about open FDs, freqently accessed files. open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # Turn on gzip output compression to save bandwidth. # http://wiki.nginx.org/HttpGzipModule gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; gzip_http_version 1.1; gzip_vary on; gzip_proxied any; #gzip_proxied expired no-cache no-store private auth; gzip_comp_level 6; gzip_buffers 16 8k; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript application/javascript; # show all files and folders autoindex on; server { # access from localhost only listen 127.0.0.1:80; server_name localhost; root www; # the following default "catch-all" configuration, allows access to the server from outside. # please ensure your firewall allows access to tcp/port 80. check your "skype" config. # listen 80; # server_name _; log_not_found off; charset utf-8; access_log logs/access.log main; # handle files in the root path /www location / { index index.php index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root www; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 # location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9100; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } # add expire headers location ~* ^.+.(gif|ico|jpg|jpeg|png|flv|swf|pdf|mp3|mp4|xml|txt|js|css)$ { expires 30d; } # deny access to .htaccess files (if Apache's document root concurs with nginx's one) # deny access to git & svn repositories location ~ /(\.ht|\.git|\.svn) { deny all; } } # include config files of "enabled" domains include domains-enabled/*.conf; } Here is the enabled domain conf file: access_log off; access_log C:/server/www/test.dev/logs/access.log; error_log C:/server/www/test.dev/logs/error.log; # HTTP Server server { listen 127.0.0.1:80; server_name test.dev; root C:/server/www/test.dev/public; index index.php; rewrite_log on; default_type application/octet-stream; #include /etc/nginx/mime.types; # Include common configurations. include domains-common/location.conf; } # HTTPS server server { listen 443 ssl; server_name test.dev; root C:/server/www/test.dev/public; index index.php; rewrite_log on; default_type application/octet-stream; #include /etc/nginx/mime.types; # Include common configurations. include domains-common/location.conf; include domains-common/ssl.conf; } Contents of ssl.conf: # OpenSSL for HTTPS connections. ssl on; ssl_certificate C:/server/bin/openssl/certs/cert.pem; ssl_certificate_key C:/server/bin/openssl/certs/cert.key; ssl_session_timeout 5m; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; # Pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 location ~ \.php$ { try_files $uri =404; fastcgi_param HTTPS on; fastcgi_pass 127.0.0.1:9100; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } Contents of location.conf: # Remove trailing slash to please Laravel routing system. if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } location / { try_files $uri $uri/ /index.php?$query_string; } # We don't need .ht files with nginx. location ~ /(\.ht|\.git|\.svn) { deny all; } # Added cache headers for images. location ~* \.(png|jpg|jpeg|gif)$ { expires 30d; log_not_found off; } # Only 3 hours on CSS/JS to allow me to roll out fixes during early weeks. location ~* \.(js|css)$ { expires 3h; log_not_found off; } # Add expire headers. location ~* ^.+.(gif|ico|jpg|jpeg|png|flv|swf|pdf|mp3|mp4|xml|txt)$ { expires 30d; } # Pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 location ~ \.php$ { try_files $uri /index.php =404; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; fastcgi_pass 127.0.0.1:9100; } Any ideas where this is going wrong?

  Read the article

• Mysql queries stuck in "sending data" state

  - by MarkPW

  I'm running a Litespeed web server and a database server (2 x Clovertown 5335) with MySQL 5.1.52-log (running on Cent OS 4.5 and 4.6 32bit respectively). Last week, I upgraded from 5.0.51a-community-log and since then I've been having a problem whereby my database server's load starts increasing for no apparent reason. Running SHOW PROCESSLIST; I see all of my SQL_CACHE queries that use a wildcard in WHERE, backing up and getting stuck in "sending data" state. However, other queries that use SQL_CACHE but no wildcard do not get caught up in this. To get things going again, the first time it happens (after about 24 hours), I have to restart mysql. 4/5 times it will re-occur after about 20 minutes or so and this time and for subsequent occurrences it is not necessary to restart mysql. Simply stopping the web server for a few minutes will suffice while I allow the stuck queries to clear themselves up. I had no such problem with the the previous mysql install. What could be causing the issue and how do I resolve it? Thanks

  Read the article

• Make Nginx fail when SSL certificate not present, instead of hopping to only available certificate

  - by Oli

  I've got a bunch of websites on a server, all hosted through nginx. One site has a certificate, the others do not. Here's an example of two sites, using (fairly accurate) representations of real configuration: server { listen 80; server_name ssl.example.com; return 301 https://ssl.example.com$request_uri; } server { listen 443 ssl; server_name ssl.example.com; } server { listen 80; server_name nossl.example.com; } SSL works on ssl.example.com great. If I visit http://nossl.example.com, that works great, but if I try to visit https://nossl.example.com (note the SSL), I get ugly warnings about the certificate being for ssl.example.com. By the sounds of it, because ssl.example.com is the only site listening on port 443, all requests are being sent to it, regardless of domain name. Is there anything I can do to make sure a Nginx server directive only responds to domains it's responsible for?

  Read the article

• CopSSH SFTP -- limit users access to their home directory only

  - by bradvido

  Let me preface this by saying I've read and followed these instructions at the FAQ many times: http://www.itefix.no/i2/node/37 It does not do what the title claims... It allows every user access to every other user's home directory, as well as access to all subfolders below the copssh installation path. I'm only using this for SFTP access and I need my users to be sandboxed into only their home directory. If you know a fool-proof way to lock users down so they can see only their home directory and its subfolders, stop reading now and reply with the solution. The details: Here is exactly what i tried as I followed the FAQ. My copSSH installation directory is: C:\Program Files\CopSSH net localgroup sftp_users /ADD **Create a user group to hold all my SFTP users cacls c:\ /c /e /t /d sftp_users **For that group, deny access at the top level and all levels below cacls "C:\Program Files\CopSSH" /c /e /t /r sftp_users **Allow my user group access to the copSSH installation directory and its subdirectories For each sftp user, I create a new windows user account, then I: net localgroup sftp_users sftp_user_1 /add **Add my user to the group I've created Open the activate user wizard for CopSSH, choosing the user, "/bin/sftponly" and Remove copssh home directory if it exists **Remains checked Create keys for public key authentication **Remains checked Create link to user's real home directory **Remains checked This works, however, every user has access to every other user's home directory as well as the CopSSH root directory.... So I tried denying access for all users to the user home directory: cacls "C:\Program Files\CopSSH\home" /c /e /t /d sftp_users **Deny access for users to the user home directory Then I tried adding permissions on a user-by-user basis for each users home\username folder. However,these permission were not allowed by windows because of the above deny rule i created at the home directory was being inherited and over-riding my allow rule. The next step for me would be to remove the deny rule at the home directory and for each user folder, add a deny rule for every user it doesn't belong to, and add an allow rule for the one user it does belong to. However, as my user list gets long, this will become very cumbersome. Thanks for the help!

  Read the article

< Previous Page | 922 923 924 925 926 927 928 929 930 931 932 933  | Next Page >