Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 93/1213 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 with 2.6.39 kernel

    - by Dean Thomson
    I've been getting an issue since upgrading to 2.6.39 in Natty from the Kernel-PPA repository. When I do a sudo update-initramfs -u I get the following error message. update-initramfs: Generating /boot/initrd.img-2.6.39-0-generic-pae W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 I did notice that firmware wasn't in the allocated directory. Does anyone know where to get the firmware files for this.

    Read the article

  • How to fix "apt-get upgrade" errors?

    - by mohamad farid bin abdullah
    I get these errors when I try to upgrade the packages installed on my Ubuntu system: m@m-desktop ~ $ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up drbd8-source (2:8.3.7-1ubuntu2.3) ... Removing old drbd8-8.3.7 DKMS files... ------------------------------ Deleting module version: 8.3.7 completely from the DKMS tree. ------------------------------ Done. Loading new drbd8-8.3.7 DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i386 Building initial module for 2.6.35-22-generic Error! Bad return status for module build on kernel: 2.6.35-22-generic (i386) Consult the make.log in the build directory /var/lib/dkms/drbd8/8.3.7/build/ for more information. dpkg: error processing drbd8-source (--configure): subprocess installed post-installation script returned error exit status 10 dpkg: dependency problems prevent configuration of drbd8-utils: drbd8-utils depends on drbd8-source; however: Package drbd8-source is not configured yet. dpkg: error processing drbd8-utils (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: drbd8-source drbd8-utils E: Sub-process /usr/bin/dpkg returned an error code (1) m@m-desktop ~ $

    Read the article

  • Installing drivers for Ubuntu 12.04 on MacBook Pro 9,1 Mid 2012 15 inch

    - by Pratyush Nalam
    I just installed Ubuntu 12.04 on my MacBook Pro 9,1 Mid 2012 non retina 15 inch. I installed the 4 drivers from this link https://launchpad.net/~mactel-support/+archive/ppa?field.series_filter=precise but still I can't get wireless or bluetooth to work. Even adaptive brightness I think isn't working. Can anyone suggest where to get the complete set of drivers? P.s. Additional drivers says no proprietary devices found which is weird.

    Read the article

  • Ubuntu can't find the correct max resolution with Samsung SyncMaster SA300

    - by fatmatto
    i decided to install ubuntu also on my desktop PC (Windows has been exorcised from my life) but i am having some problems i didn't have with previous hardware configurations. My display is a Samsung SyncMaster SA300, on windows vista the maximum resolution (1920x1080) worked well, but now, ubuntu (after installing fglrx drivers) tells me that the maximum resolution is 1600x1200 I googled a lot last night, and i found a lot of people solving this (on different displays though) with xrandr. I was not able to do it, because xrandr keep complaining "you goddamn maximum resolution is 1600x1600". What xranrd clean command say is: mattia@fatdesktop:~$ xrandr Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600 DFP1 disconnected (normal left inverted right x axis y axis) CRT1 disconnected (normal left inverted right x axis y axis) CRT2 connected 1600x1200+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1600x1200 60.0*+ 1400x1050 60.0 1280x1024 60.0 47.0 43.0 1440x900 59.9 1280x960 60.0 1280x800 60.0 1152x864 60.0 47.0 43.0 1280x768 59.9 56.0 1280x720 60.0 50.0 1024x768 60.0 43.5 800x600 60.3 56.2 47.0 720x576 50.0 720x480 60.0 640x480 60.0 TV disconnected (normal left inverted right x axis y axis) CV disconnected (normal left inverted right x axis y axis) Then according to other internet posts and forums: mattia@fatdesktop:~$ cvt 1920 1080 60 # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync So now i have to add that modeline mattia@fatdesktop:~$ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync mattia@fatdesktop:~$ xrandr --addmode CRT2 1920x1080_60.00 And here comes the pain: mattia@fatdesktop:~$ xrandr --output CRT2 --mode 1920x1080_60.00 xrandr: **screen cannot be larger than 1600x1600 (desired size 1920x1080)** See? screen cannot be larger than 1600x1600 (desired size 1920x1080) At this point, the 1920x1080 option appears inside the resolution choice menu (the graphical one). But last night, when i tried to select it, my screen went black, and i had to power off the pc. Any clues? am i on the wrong path?

    Read the article

  • Set up printing with a networked LPR printer?

    - by Ben
    I'm trying to set up printing to a networked LPR printer, but I can't seem to make it work. The connexion information that IT gives is: Print Spooler: printing.domain.edu Printer Name: PrinterName Print port: 515 Bidirectional: Disabled It's an HP LaserJet p4015x, and I'm using the "HP LaserJet p4015x, hpcups 3.10.6 (color, 2-sided printing)" driver, according to CUPS. I have tried installing via the CUPS admin interface as lpd://printing.domain.edu:515/PrinterName, lpd://printing.domain.edu/PrinterName, and http://printing.domain.edu:515/PrinterName, and none of these has worked (i.e. test pages show up as "stopped").

    Read the article

  • dpkg stuck downloading font files

    - by Bob Bowles
    I have been reinstalling Ubuntu 12.04. The install from USB works fine, and I could update everything OK, but when I got to re-installing my application software I hit a snag. One of the packages I tried to re-install was ttf-mscorefonts-installer. dpkg stalled during this setup, downloading a font file (it had tried to download it all night). I stopped dpkg, and attempted to re-start downloading something else, but it would not let me. The commands I typed are as follows: bob@bobStudio:~$ sudo rm /var/lib/dpkg/lock This unlocks dpkg, but if I try to do something I get the following message (eg): bob@bobStudio:~$ sudo apt-get install synaptic E: dpgk was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem So, I did just that: bob@bobStudio:~$ sudo dpkg --configure -a whereupon it started the previously failed download all over again. I went round the loop here a few times and each time after the configure command it re-started the failing download, but then I got this: bob@bobStudio:~$ sudo dpkg --configure -a Setting up update-notifier-common (0.119ubuntu8.4) ... ttf-mscorefonts-installer: downloading http://downloads.sourceforge.net/corefonts/andale32.exe Traceback (most recent call last): File "/usr/lib/update-notifier/package-data-downloader", line 234, in process_download_requests dest_file = urllib.urlretrieve(files[i])[0] File "/usr/lib/python2.7/urllib.py", line 93, in urlretrieve return _urlopener.retrieve(url, filename, reporthook, data) File "/usr/lib/python2.7/urllib.py", line 239, in retrieve fp = self.open(url, data) File "/usr/lib/python2.7/urllib.py", line 207, in open return getattr(self, name)(url) File "/usr/lib/python2.7/urllib.py", line 344, in open_http h.endheaders(data) File "/usr/lib/python2.7/httplib.py", line 954, in endheaders self._send_output(message_body) File "/usr/lib/python2.7/httplib.py", line 814, in _send_output self.send(msg) File "/usr/lib/python2.7/httplib.py", line 776, in send self.connect() File "/usr/lib/python2.7/httplib.py", line 757, in connect self.timeout, self.source_address) File "/usr/lib/python2.7/socket.py", line 553, in create_connection for res in getaddrinfo(host, port, 0, SOCK_STREAM): IOError: [Errno socket error] [Errno -2] Name or service not known Setting up ttf-mscorefonts-installer (3.4ubuntu3) ... bob@bobStudio:~$ sudo apt-get update E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable) E: Unable to lock directory /var/lib/apt/lists/ bob@bobStudio:~$ sudo rm /var/lib/dpkg/lock bob@bobStudio:~$ sudo apt-get update E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable) E: Unable to lock directory /var/lib/apt/lists/ The good news is that, once I sorted out the file locks, this seems to have permanently aborted the setup of the font package, so at least I can do something else with dpkg. That leaves two questions: 1) How could I have broken the loop without actually crashing out of dpkg? 2) How can I set up the ttf-mscorefonts-installer package in the future? Is this download really broken, or is it 'just' a bad Internet connection?

    Read the article

  • How to use Xvfb in Ubuntu 14.04 with/without RandR?

    - by Itchy
    I try to run Unit-Tests with Selenium running Firefox on my Ubuntu 14.04 Server. And I'm using Xvfb as described in this blog to simulate a virtual display to show Firefox in. But Xvfg somehow doesn't load/work with RandR. Because whenever I try this: sudo Xvfb :10 -ac & export DISPLAY=:10 firefox I get an Xlib: extension "RandR" missing on display ":10"-Error. I've also tried sudo Xvfb :10 -ac +extension RANDR, sudo Xvfb :10 -ac -extension RANDR and beacuse it supplies with "xrandr" also apt-get install x11-xserver-utils. And my setup is a plain empty Ubuntu 14.04 Server with apt-get install xvfb firefox. Can anyone please help me run Xvfb with or without RandR?

    Read the article

  • Adobe Reader issue in Ubuntu 13.10

    - by Ridwan Ahmed Khan
    I have downloaded adobe reader 9.5.5 and installed it using gdebi.Now if I click on any pdf it is not starting.I tried "acroread" in terminal and it is showing me this error /opt/Adobe/Reader9/Reader/intellinux/bin/acroread: error while loading shared libraries: libxml2.so.2: cannot open shared object file: No such file or directory Then I have installed libxml2.But still it is showing the same above error. My system OS is ubuntu 13.10. Is there any solution to my problem for using Adobe reader or any other alternative pdf reader other than foxit and default(evince) or okular by using which I can highlight any text in my pdf?

    Read the article

  • ubuntu one not syncing

    - by Martin
    I am really starting to despair as I have been trying ubuntu one for several months, trying it on several machines, and it has caused me loads of different issues wasting me a lot of time. It is not straight forward to use, it should be a piece of software that runs in background and users should not think about checking all the time if it is really doing it's job. Of course I have been searching around this website and other forums but couldn't find an answer to my situation. Yesterday I had several problems with the client not syncing and using a lot of the machine's RAM, up and CPU. I had to reboot on several occasions and leave the office's PC on overnight in order to sync a few files of not more than a few MB. Today I am experiencing another problem: I have decided to do a test putting a small file in my ubuntu one shared folder. Ubuntu one is not detecting it (now already more than an hour), therefore not uploading it to the server. martin@ubuntu-desktop:~$ u1sdtool --status State: QUEUE_MANAGER connection: With User With Network description: processing the commands pool is_connected: True is_error: False is_online: True queues: IDLE and martin@ubuntu-desktop:~$ u1sdtool --current-transfers Current uploads: 0 Current downloads: 0 I am running Ubuntu 11.04 64 with all recent updates. On my other machine the transfer of files seems to be completely frozen, with around 10 files in the queue but no transfer whatsoever. Another curious issue is on my Ubuntu 10.10 laptop where ubuntu one seems to have completly disappeared from Nautilus context menu, folder/file sync status icons missing. I have therefore been forced to upgrade to 11.04 on this machine. Anyway, now I would like to solve the ** processing the commands pool ** issue and make sure the client

    Read the article

  • How to install VLC? When i get this error?

    - by YumYumYum
    How to install VLC? (with error showing such). root@sun-desktop:/var/tmp# apt-get install vlc Reading package lists... Done Building dependency tree Reading state information... Done vlc is already the newest version. The following packages were automatically installed and are no longer required: liblash3 libreoffice-l10n-common libgsf-1-common libcutter-dev pocketsphinx-hmm-wsj1 libfluidsynth1 libftgl2 projectm-data libprojectm-qt1 libgnomevfs2-extra libbml0 libprojectm2 libpocketsphinx1 libsphinxbase1 buzztard-data libbabl-0.0-0 libgegl-0.0-0 libhal1 libgsf-1-114 libsidplay1 pocketsphinx-utils liboil0.3 pocketsphinx-lm-wsj libcutter0 cutter-testing-framework-bin Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 239 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up vlc-nox (1.1.9-1ubuntu1.3) ... /var/lib/dpkg/info/vlc-nox.postinst: 10: /usr/lib/vlc/vlc-cache-gen: not found dpkg: error processing vlc-nox (--configure): subprocess installed post-installation script returned error exit status 127 dpkg: dependency problems prevent configuration of vlc: vlc depends on vlc-nox (= 1.1.9-1ubuntu1.3); however: Package vlc-nox is not configured yet. dpkg: error processing vlc (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: vlc-nox vlc E: Sub-process /usr/bin/dpkg returned an error code (1) # sudo apt-get autoremove vlc vlc-nox Reading package lists... Done Building dependency tree Reading state information... Done Package vlc is not installed, so not removed Package vlc-nox is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 237 not upgraded.

    Read the article

  • Unable to start Apache on Ubuntu 12.10: no listening sockets available

    - by michalstanko
    I'm unable to start apache2 installed using apt-get. I'm getting the very same error on 2 separate Ubuntu 12.10 installations, one on my desktop PC, the other one running in VirtualBox: michal@michaltest:~$ sudo service apache2 start * Starting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName no listening sockets available, shutting down Unable to open logs Action 'start' failed. The Apache error log may have more information. [fail] lsof says: michal@michaltest:/var/log/apache2$ sudo lsof -i :80 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ubuntu-ge 2074 michal 11u IPv4 23978 0t0 TCP michaltest.local:47578->mulberry.canonical.com:http (CLOSE_WAIT) firefox 25194 michal 71u IPv4 42477 0t0 TCP michaltest.local:59793->69.59.197.29:http (ESTABLISHED) firefox 25194 michal 76u IPv4 41834 0t0 TCP michaltest.local:59698->69.59.197.29:http (ESTABLISHED) gvfsd-htt 25320 michal 12u IPv4 42568 0t0 TCP michaltest.local:56203->lb260.amst.cotendo.net:http (CLOSE_WAIT) netstat says: michal@michaltest:/var/log/apache2$ sudo netstat -lnp | grep '80' unix 2 [ ACC ] STREAM LISTENING 8030 876/acpid /var/run/acpid.socket /var/log/apache2/error.log: [Thu Nov 08 11:13:30 2012] [notice] Apache/2.2.22 (Ubuntu) configured -- resuming normal operations [Thu Nov 08 11:17:32 2012] [notice] caught SIGTERM, shutting down /etc/apache2/ports.conf: NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> Thanks for your help. EDIT #1: michal@michaltest:~$ sudo netstat -ano | grep '443' tcp 54 0 10.0.2.15:58504 91.189.92.70:443 CLOSE_WAIT off (0.00/0/0)

    Read the article

  • Udev webcam rule read, but not respected?

    - by user89305
    I have two usb-webcams on them machine, but at bot they some switch /dev/video number. The solution to this problem seems to be new udev rule. I have added this rule in/etc/udev/rules.d/jj-video.rules: Fix webcam 1 KERNEL=="video1", SUBSYSTEM=="video4linux", SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d6b", ATTRS{idProduct}=="0001", SYMLINK+="webcam1" Fix webcam 2 KERNEL=="video2", SUBSYSTEM=="video4linux", ATTR{name}=="Logitech QuickCam Pro 3000", KERNELS=="0000:00:1d.0", SUBSYSTEMS=="pci", DRIVERS=="uhci_hcd", ATTRS{vendor}=="0x8086", ATTRS##{device}=="0x2658", SYMLINK+="webcam2" but the symlinks are not created. I have tried many different combinations in this file. The present ones are just my lates attempts. I found the parameters in: jjk@eee-old:~$ udevadm info -a -p $(udevadm info -q path -p /class/video4linux/video1) Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1': KERNEL=="video1" SUBSYSTEM=="video4linux" DRIVER=="" ATTR{name}=="Logitech QuickCam Pro 3000" ATTR{index}=="0" ATTR{button}=="0" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0': KERNELS=="2-2:1.0" SUBSYSTEMS=="usb" DRIVERS=="Philips webcam" ATTRS{bInterfaceNumber}=="00" ATTRS{bAlternateSetting}==" 9" ATTRS{bNumEndpoints}=="02" ATTRS{bInterfaceClass}=="0a" ATTRS{bInterfaceSubClass}=="ff" ATTRS{bInterfaceProtocol}=="00" ATTRS{supports_autosuspend}=="0" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2': KERNELS=="2-2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{configuration}=="" ATTRS{bNumInterfaces}==" 3" ATTRS{bConfigurationValue}=="1" ATTRS{bmAttributes}=="a0" ATTRS{bMaxPower}=="500mA" ATTRS{urbnum}=="371076" ATTRS{idVendor}=="046d" ATTRS{idProduct}=="08b0" ATTRS{bcdDevice}=="0002" ATTRS{bDeviceClass}=="00" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{bNumConfigurations}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{speed}=="12" ATTRS{busnum}=="2" ATTRS{devnum}=="2" ATTRS{devpath}=="2" ATTRS{version}==" 1.10" ATTRS{maxchild}=="0" ATTRS{quirks}=="0x0" ATTRS{avoid_reset_quirk}=="0" ATTRS{authorized}=="1" ATTRS{serial}=="01402100A5000000" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2': KERNELS=="usb2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{configuration}=="" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bMaxPower}==" 0mA" ATTRS{urbnum}=="34" ATTRS{idVendor}=="1d6b" ATTRS{idProduct}=="0001" ATTRS{bcdDevice}=="0302" ATTRS{bDeviceClass}=="09" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{bNumConfigurations}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{speed}=="12" ATTRS{busnum}=="2" ATTRS{devnum}=="1" ATTRS{devpath}=="0" ATTRS{version}==" 1.10" ATTRS{maxchild}=="2" ATTRS{quirks}=="0x0" ATTRS{avoid_reset_quirk}=="0" ATTRS{authorized}=="1" ATTRS{manufacturer}=="Linux 3.2.0-29-generic uhci_hcd" ATTRS{product}=="UHCI Host Controller" ATTRS{serial}=="0000:00:1d.0" ATTRS{authorized_default}=="1" looking at parent device '/devices/pci0000:00/0000:00:1d.0': KERNELS=="0000:00:1d.0" SUBSYSTEMS=="pci" DRIVERS=="uhci_hcd" ATTRS{vendor}=="0x8086" ATTRS{device}=="0x2658" ATTRS{subsystem_vendor}=="0x1043" ATTRS{subsystem_device}=="0x82d8" ATTRS{class}=="0x0c0300" ATTRS{irq}=="23" ATTRS{local_cpus}=="ff" ATTRS{local_cpulist}=="0-7" ATTRS{dma_mask_bits}=="32" ATTRS{consistent_dma_mask_bits}=="32" ATTRS{broken_parity_status}=="0" ATTRS{msi_bus}=="" looking at parent device '/devices/pci0000:00': KERNELS=="pci0000:00" SUBSYSTEMS=="" DRIVERS=="" jjk@eee-old:~$ And tested the setup: sudo udevadm --debug test /sys/class/video4linux/video1 main: runtime dir '/run/udev' run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-gnupg.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-hplip.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-ia64.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-inputattach.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-libgphoto2-2.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-libsane.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-ppc.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-xserver-xorg-video-intel.rules' as rules file parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file parse_file: reading '/lib/udev/rules.d/50-firmware.rules' as rules file parse_file: reading '/lib/udev/rules.d/50-udev-default.rules' as rules file parse_file: reading '/lib/udev/rules.d/55-dm.rules' as rules file parse_file: reading '/lib/udev/rules.d/56-hpmud_support.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-cdrom_id.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-pcmcia.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-alsa.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-input.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-serial.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-dm.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-tape.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-v4l.rules' as rules file parse_file: reading '/lib/udev/rules.d/61-accelerometer.rules' as rules file parse_file: reading '/lib/udev/rules.d/64-xorg-xkb.rules' as rules file parse_file: reading '/lib/udev/rules.d/66-xorg-synaptics-quirks.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 parse_file: reading '/lib/udev/rules.d/69-libmtp.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-xorg-vmmouse.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-xserver-xorg-input-wacom.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-cd.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-net.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-printers.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-udev-acl.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-cd-aliases-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-net-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-persistent-net-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-probe_mtd.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-tty-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-ericsson-mbm.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-longcheer-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-nokia-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-pcmcia-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-platform-serial-whitelist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-qdl-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-simtech-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-x22x-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-zte-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-nm-olpc-mesh.rules' as rules file parse_file: reading '/lib/udev/rules.d/78-graphics-card.rules' as rules file parse_file: reading '/lib/udev/rules.d/78-sound-card.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-drivers.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-mm-candidate.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-udisks.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-brltty.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-hdparm.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-hplj10xx.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-keyboard-configuration.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-regulatory.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-alsa-restore.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-alsa-ucm.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-libgpod.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-pulseaudio.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-cd-devices.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-keyboard-force-release.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-keymap.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-udev-late.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-dell.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-gateway.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-ibm.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-csr.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file parse_file: reading '/etc/udev/rules.d/jj-video.rules' as rules file udev_rules_new: rules use 259284 bytes tokens (21607 * 12 bytes), 37913 bytes buffer udev_rules_new: temporary index used 67520 bytes (3376 * 20 bytes) udev_device_new_from_syspath: device 0x215103e0 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' udev_device_new_from_syspath: device 0x21510758 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' udev_device_read_db: device 0x21510758 filled with db file data udev_device_new_from_syspath: device 0x21510e10 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0' udev_device_new_from_syspath: device 0x21511b10 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2' udev_device_new_from_syspath: device 0x215132f8 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2' udev_device_new_from_syspath: device 0x21513650 has devpath '/devices/pci0000:00/0000:00:1d.0' udev_device_new_from_syspath: device 0x21513980 has devpath '/devices/pci0000:00' udev_rules_apply_to_event: GROUP 44 /lib/udev/rules.d/50-udev-default.rules:29 udev_rules_apply_to_event: IMPORT 'v4l_id /dev/video1' /lib/udev/rules.d/60-persistent-v4l.rules:7 udev_event_spawn: starting 'v4l_id /dev/video1' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_VERSION=2' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_PRODUCT=Logitech QuickCam Pro 3000' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_CAPABILITIES=:capture:' spawn_wait: 'v4l_id /dev/video1' [2609] exit with return code 0 udev_rules_apply_to_event: IMPORT builtin 'usb_id' /lib/udev/rules.d/60-persistent-v4l.rules:9 builtin_usb_id: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0: if_class 10 protocol 0 udev_builtin_add_property: ID_VENDOR=046d udev_builtin_add_property: ID_VENDOR_ENC=046d udev_builtin_add_property: ID_VENDOR_ID=046d udev_builtin_add_property: ID_MODEL=08b0 udev_builtin_add_property: ID_MODEL_ENC=08b0 udev_builtin_add_property: ID_MODEL_ID=08b0 udev_builtin_add_property: ID_REVISION=0002 udev_builtin_add_property: ID_SERIAL=046d_08b0_01402100A5000000 udev_builtin_add_property: ID_SERIAL_SHORT=01402100A5000000 udev_builtin_add_property: ID_TYPE=generic udev_builtin_add_property: ID_BUS=usb udev_builtin_add_property: ID_USB_INTERFACES=:0aff00:010100:010200: udev_builtin_add_property: ID_USB_INTERFACE_NUM=00 udev_builtin_add_property: ID_USB_DRIVER=Philips webcam udev_rules_apply_to_event: LINK 'v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' /lib/udev/rules.d/60-persistent-v4l.rules:10 udev_rules_apply_to_event: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-v4l.rules:16 udev_builtin_add_property: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0 udev_builtin_add_property: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0 udev_rules_apply_to_event: LINK 'v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' /lib/udev/rules.d/60-persistent-v4l.rules:17 udev_rules_apply_to_event: RUN 'udev-acl --action=$env{ACTION} --device=$env{DEVNAME}' /lib/udev/rules.d/70-udev-acl.rules:74 udev_rules_apply_to_event: LINK 'webcam1' /etc/udev/rules.d/jj-video.rules:2 udev_event_execute_rules: no node name set, will use kernel supplied name 'video1' udev_node_add: creating device node '/dev/video1', devnum=81:1, mode=0660, uid=0, gid=44 udev_node_mknod: preserve file '/dev/video1', because it has correct dev_t udev_node_mknod: preserve permissions /dev/video1, 020660, uid=0, gid=44 node_symlink: preserve already existing symlink '/dev/char/81:1' to '../video1' link_find_prioritized: found 'c81:2' claiming '/run/udev/links/v4l\x2fby-id\x2fusb-046d_08b0_01402100A5000000-video-index0' udev_device_new_from_syspath: device 0x21516748 has devpath '/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/video4linux/video2' udev_device_read_db: device 0x21516748 filled with db file data link_find_prioritized: found 'c81:1' claiming '/run/udev/links/v4l\x2fby-id\x2fusb-046d_08b0_01402100A5000000-video-index0' link_update: creating link '/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' to '/dev/video1' node_symlink: atomically replace '/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' link_find_prioritized: found 'c81:1' claiming '/run/udev/links/v4l\x2fby-path\x2fpci-0000:00:1d.0-usb-0:2:1.0-video-index0' link_update: creating link '/dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' to '/dev/video1' node_symlink: preserve already existing symlink '/dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' to '../../video1' link_find_prioritized: found 'c81:1' claiming '/run/udev/links/webcam1' link_update: creating link '/dev/webcam1' to '/dev/video1' node_symlink: preserve already existing symlink '/dev/webcam1' to 'video1' udev_device_update_db: created db file '/run/udev/data/c81:1' for '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' ACTION=add COLORD_DEVICE=1 COLORD_KIND=camera DEVLINKS=/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0 /dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0 /dev/webcam1 DEVNAME=/dev/video1 DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1 ID_BUS=usb ID_MODEL=08b0 ID_MODEL_ENC=08b0 ID_MODEL_ID=08b0 ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0 ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0 ID_REVISION=0002 ID_SERIAL=046d_08b0_01402100A5000000 ID_SERIAL_SHORT=01402100A5000000 ID_TYPE=generic ID_USB_DRIVER=Philips webcam ID_USB_INTERFACES=:0aff00:010100:010200: ID_USB_INTERFACE_NUM=00 ID_V4L_CAPABILITIES=:capture: ID_V4L_PRODUCT=Logitech QuickCam Pro 3000 ID_V4L_VERSION=2 ID_VENDOR=046d ID_VENDOR_ENC=046d ID_VENDOR_ID=046d MAJOR=81 MINOR=1 SUBSYSTEM=video4linux TAGS=:udev-acl: UDEV_LOG=6 USEC_INITIALIZED=18213768 run: 'udev-acl --action=add --device=/dev/video1' jjk@eee-old:~$ (and correspondingly for video2) It looks to me like my rules are read, but not respected. What am I doing wrong?

    Read the article

  • Boot failure : No DEFAULT or UI configuration directive found!

    - by Sven
    Hello .... I've tried to install Ubuntu on a VMWare Virtual Machine, but it never get's past the bootloader : ISOLINUX 4.01 debian-20100714 ETCD Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found! boot: _ I've also tried to burn this .iso image to a CD and go from there - but I got the same problems also ... Some more details : VMWare Server 2.0.2 Build 203138 on Windows 2008 R2 ubuntu-10.10-desktop-i386.iso image used (downloaded yesterday evening) I have no clue, why this is not booting !!! Somebody have any ideas ? Thanks, Sven

    Read the article

  • Cannot connect to google talk using empathy/pidgin after upgrading

    - by levesque
    I can't seem to be able to connect to google talk using either pidgin or empathy after upgrading to Ubuntu 10.10 (fresh install). I do not know why... empathy just writes "Connecting ..." forever and never connects. What can I do from there? Google talk's web interface works just fine for me so I doubt it is a firewall issue. EDIT: In fact sometimes it's able to connect (empathy), it just takes a LOOONG time (I'd say about 5 mins), longer than I am willing to wait. On the other hand, the web interface is able to connect in seconds.

    Read the article

  • Assign highest priority to my local repository

    - by Anwar Shah
    Original question was : "How to assign highest priority to local repository without using sources.list file" I have setup a local repository with packages I downloaded. I use it to avoid downloading the same packages over the Internet, when I need to reinstall my Ubuntu. It is a basic repository, created with apt-ftparchive packages . > Packages. I made this a trusted repository to avoid "unauthenticated repository" warning. (When you have a untrusted repository, apt or synaptic try to download the same packages over the Internet, 'cause it is trusted). I have been using this local repository for at least 1 years. But I have to always put my local repository line at the top of the sources.list file to use this. But this is annoying, since I must open a terminal and do some typing on it every time I reinstall Ubuntu, though there is a better tool software-properties-gtk. I cannot use this tool since it place the source line at the end of `sources.list. And the real problem is that, the apt or synaptic always download a package from the source which is mentioned earlier, without inspecting whether the packages are already available in the local repository. So, I have no choice but to place the local source at the top of sources.list doing terminal (I actually don't hate terminal, but I need a solution) . I have tried this method. But this does not help me. My preference file is this in /etc/apt/preferences.d/local-pin-900 Package: * Pin: release o=Local,n=ubuntu-local Pin-Priority: 900 My release file is this Origin: Local Label: Local-Ubuntu Description: Local Ubuntu Repository Codename: ubuntu-local MD5Sum: ed43222856d18f389c637ac3d7dd6f85 1043412 Packages d41d8cd98f00b204e9800998ecf8427e 0 Sources When I enable the apt-preference, the apt-cache policy correctly shows the preference, e.g. It shows the local repository has the highest priority. But when I do this sudo apt-get install <package-name>, apt tries to download it from Internet. But when I place my local-repo at the top, it installs from local repository. So, My question is - 'Is it possible to force apt to use local repository when the package is available in local repository, without explicitly placing "the local source" at the top of my repository list (e.g sources.list file) ?' Edit: output of apt-cache policy $package_name is as follows nautilus-wipe: Installed: (none) Candidate: 0.1.1-2 Version table: 0.1.1-2 0 500 http://archive.ubuntu.com/ubuntu/ precise/universe i386 Packages 900 file:/media/Main/Linux-Software/Ubuntu/Precise/ Packages It is showing that my local repository has higher preference, though it is not the one which comes first in sources.list file. Here is the output of apt-get install nautilus-wipe Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: nautilus-wipe 0 upgraded, 1 newly installed, 0 to remove and 131 not upgraded. Need to get 30.7 kB of archives. After this operation, 150 kB of additional disk space will be used. 'http://archive.ubuntu.com/ubuntu/pool/universe/n/nautilus-wipe/nautilus-wipe_0.1.1-2_i386.deb' nautilus-wipe_0.1.1-2_i386.deb 30730 MD5Sum:7d497b8dfcefe1c0b51a45f3b0466994 It is still trying to get the file from Internet, though I think it should be happy with the local one.

    Read the article

  • Can I perform a distribution upgrade without rebooting?

    - by Martin Eve
    Hi, I would, ideally, like to run a distribution upgrade that doesn't end in a complete reboot of the machine (owing to an irritation in my hardware that requires a period of disconnection from the power supply before my SSD can be detected). What would be the procedure for doing this from a desktop environment? I would image: dist-upgrade shutdown all graphical services restart X I'd appreciate any advice (particularly on the exact procedure for step 2, if this correct). NB. I'm using KSplice for in-memory kernel patching, so the kernel is already dealt with. Many thanks, Martin

    Read the article

  • Out of disk space - /boot at 100%

    - by uvasal
    My /boot is at 100%. When I run aptitude search ~ilinux-image I'm getting loads of unused images. When I try to delete one of them (after checking which one is currently in use by doing uname -r), e.g apt-get autoremove linux-image-3.2.0-44-generic I get: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed linux-server : Depends: linux-headers-server (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). And running apt-get -f install throws No space left on device. I've also tried doing apt-get purge but I am getting the same thing. Output of df -h and dpkg -l linux-*.: root@hb2088:/srv/www# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 9.4G 3.0G 6.0G 34% / udev 301M 4.0K 301M 1% /dev tmpfs 124M 228K 124M 1% /run none 5.0M 0 5.0M 0% /run/lock none 309M 0 309M 0% /run/shm /dev/sda1 92M 91M 0 100% /boot root@hb2088:/srv/www# dpkg -l linux-* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-====================================================-====================================================-======================================================================================================================== un linux-doc-3.2.0 <none> (no description available) ii linux-firmware 1.79.6 Firmware for Linux kernel drivers iU linux-generic 3.2.0.51.61 Complete Generic Linux kernel un linux-headers <none> (no description available) un linux-headers-3 <none> (no description available) un linux-headers-3.0 <none> (no description available) ii linux-headers-3.2.0-44 3.2.0-44.69 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-44-generic 3.2.0-44.69 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-45 3.2.0-45.70 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-45-generic 3.2.0-45.70 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-48 3.2.0-48.74 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-48-generic 3.2.0-48.74 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-51 3.2.0-51.77 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-51-generic 3.2.0-51.77 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-52 3.2.0-52.78 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-52-generic 3.2.0-52.78 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-3.2.0-54 3.2.0-54.82 Header files related to Linux kernel version 3.2.0 iU linux-headers-3.2.0-54-generic 3.2.0-54.82 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-generic 3.2.0.54.64 Generic Linux kernel headers iU linux-headers-server 3.2.0.54.64 Linux kernel headers on Server Equipment. un linux-image <none> (no description available) un linux-image-3.0 <none> (no description available) ii linux-image-3.2.0-44-generic 3.2.0-44.69 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-45-generic 3.2.0-45.70 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-48-generic 3.2.0-48.74 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-51-generic 3.2.0-51.77 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-52-generic 3.2.0-52.78 Linux kernel image for version 3.2.0 on 64 bit x86 SMP in linux-image-3.2.0-54-generic <none> (no description available) iU linux-image-generic 3.2.0.51.61 Generic Linux kernel image iU linux-image-server 3.2.0.51.61 Linux kernel image on Server Equipment. un linux-initramfs-tool <none> (no description available) un linux-kernel-headers <none> (no description available) un linux-kernel-log-daemon <none> (no description available) ii linux-libc-dev 3.2.0-52.78 Linux Kernel Headers for development un linux-restricted-common <none> (no description available) iU linux-server 3.2.0.51.61 Complete Linux kernel on Server Equipment. un linux-source-3.2.0 <none> (no description available) un linux-tools <none> (no description available) Output of du -sh /boot/*: root@hb2088:~# du -sh /boot/* 781K /boot/abi-3.2.0-44-generic 781K /boot/abi-3.2.0-45-generic 781K /boot/abi-3.2.0-48-generic 781K /boot/abi-3.2.0-51-generic 781K /boot/abi-3.2.0-52-generic 139K /boot/config-3.2.0-44-generic 139K /boot/config-3.2.0-45-generic 139K /boot/config-3.2.0-48-generic 139K /boot/config-3.2.0-51-generic 139K /boot/config-3.2.0-52-generic 1.6M /boot/grub 14M /boot/initrd.img-3.2.0-44-generic 14M /boot/initrd.img-3.2.0-45-generic 14M /boot/initrd.img-3.2.0-48-generic 12K /boot/lost+found 174K /boot/memtest86+.bin 176K /boot/memtest86+_multiboot.bin 2.8M /boot/System.map-3.2.0-44-generic 2.8M /boot/System.map-3.2.0-45-generic 2.8M /boot/System.map-3.2.0-48-generic 2.8M /boot/System.map-3.2.0-51-generic 2.8M /boot/System.map-3.2.0-52-generic 4.8M /boot/vmlinuz-3.2.0-44-generic 4.8M /boot/vmlinuz-3.2.0-45-generic 4.8M /boot/vmlinuz-3.2.0-48-generic 4.8M /boot/vmlinuz-3.2.0-51-generic 4.8M /boot/vmlinuz-3.2.0-52-generic

    Read the article

  • How to reenable Documents on iPhone?

    - by Matt
    So, I regularly plug in my iPhone to my computer to get voice recordings off of it. However, every time I plugged it in "iPhone" and "Documents on iPhone" would both mount, and "Documents on iPhone" would pop up automatically. As I normally don't need anything on there it was a bit of a nuisance, so I opened a terminal and ran: sudo apt-get install libimobiledevice-utils;idevicepair unpair && idevicepair pair as suggested a here This, however, took away my access to "Documents on iPhone" completely, and didn't provide an alternative like putting it in a folder on the main "iPhone" device. Now I actually NEED to get something off there. Is there anyway to get "Documents on iPhone" back? I would prefer it still didn't pop up automatically but that's a sacrifice I'm willing to make. UPDATE: I ran idevicepair pair and unplugged and replugged my phone. I now have Documents back but it still annoyingly opens every time I plug in.

    Read the article

  • How to get sound on macbook pro 4,1

    - by Thomas
    I have just installed Xubuntu 12.04.2. My soundcard is detected: thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Everything is put to max in alsamixer and nothing is muted (all the sliders are on OO. My speakers do not work, but when I plug in a headphone I hear it very soft. When I connect my stereo and put the sound VERY loud (3-blocks-of-complaining-neighbours loud) I hear it on a normal level but crackling. I added options snd-hda-intel model=mbp5 amixer set IEC958 off to at the end of /etc/modprobe.d/alsa-base.conf. When it's still not working I tried everything here: https://help.ubuntu.com/community/SoundTroubleshooting 1 >>> list-sinks 1 sink(s) available. * index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9959 volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 371.52 ms card: 0 <alsa_card.pci-0000_00_1b.0> module: 4 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC889A Analog" alsa.id = "ALC889A Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0x9b500000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC889A" alsa.components = "HDA:10ec0885,106b3a00,00100103" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-output-speaker: Speakers (priority 10000, available: unknown) properties: analog-output-headphones: Headphones (priority 9000, available: no) properties: active port: <analog-output-speaker> 2 and 3: Doesn't seem an permission issue, the sound is very far away (See opening paragraph). 4 thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 5 thomas@thomas-pc:~$ find /lib/modules/`uname -r` | grep snd /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-pcm.ko [.. huge lists continues ..] /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/vx/snd-vxpocket.ko thomas@thomas-pc:~$ 6 thomas@thomas-pc:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Apple Inc. Device 00a4 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at 9b500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 7 I guess it's supported. Linux mint and Xubuntu 13.04 had no trouble with sounds. Everything worked out of the box Thanks in advance Edit: alsa-info.sh output: WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' ALSA Information Script v 0.4.62 -------------------------------- This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See './alsa-info.sh --help' for command line options. WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' Automatically upload ALSA information to www.alsa-project.org? [y/N] : y Uploading information to www.alsa-project.org ... Done! Your ALSA information is located at http://www.alsa-project.org/db/?f=6cffc584284d4c0b266eb53249824ef83d6c4e3e Please inform the person helping you. thomas@thomas-pc:~$

    Read the article

  • How to make text file created in Ubuntu compatible with Windows notepad

    - by Saurav Kumar
    Sometime I have to use the text files created in Ubuntu using editor like gedit, in Windows. So basically when ever I create a text file in Ubuntu I append the extension .txt, and it does make the file open in Windows very easily. But the actual problem is the text files created in Ubuntu are so difficult to understand(read) when opened in Windows' Notepad. No matter how many new lines have been used, all the lines appear in the same line. Is there a easy way to save the text files in Ubuntu's editors so that it can be seen exactly the same in Windows' notepad? Like some plugins of gedit which make it compatible with Windows' Notepad? or something else.. I searched but didn't get any help. I appreciate for the help. Thanks in advance!!

    Read the article

  • How do I install Geomatica?

    - by Chethan S.
    I wanted to try the latest version(trial) of Geomatica, Geomatica 2012 on Ubuntu 11.10 beta. When I tried to run the bin file I got a whole list of dependencies. It also seems that it is a RPM package. Instead of going through each entry manually, is there any easy way to search and install a list of dependencies? Here is the list what I got - rpm: RPM should not be used directly install RPM packages, use Alien instead! rpm: However assuming you know what you are doing... error: Failed dependencies: glibc >= 2.9 is needed by geomatica-2012-12.0-0.x86_64 libstdc++43 is needed by geomatica-2012-12.0-0.x86_64 libgcc43 is needed by geomatica-2012-12.0-0.x86_64 libgomp43 is needed by geomatica-2012-12.0-0.x86_64 libgfortran43 is needed by geomatica-2012-12.0-0.x86_64 openmotif-libs >= 2.3.1 is needed by geomatica-2012-12.0-0.x86_64 /bin/sh is needed by geomatica-2012-12.0-0.x86_64 libatk-1.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libcairo.so.2()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libcrypto.so.0.9.8()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libcrypt.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.3.2)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.3.4)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.3)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.7)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libdl.so.2()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libdl.so.2(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libexpat.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libfontconfig.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgcc_s.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgcc_s.so.1(GCC_3.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgcc_s.so.1(GCC_4.0.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgdk_pixbuf-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgdk-x11-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgd.so.2()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgfortran.so.3()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgfortran.so.3(GFORTRAN_1.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgio-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libglib-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libGL.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgmodule-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgobject-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgomp.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgomp.so.1(GOMP_1.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgomp.so.1(OMP_1.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgthread-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgtk-x11-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libjpeg.so.62()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libm.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libm.so.6(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libnsl.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpango-1.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpangocairo-1.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpangoft2-1.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpng12.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpng12.so.0(PNG12_0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpthread.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpthread.so.0(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpthread.so.0(GLIBC_2.3.2)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpthread.so.0(GLIBC_2.3.4)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpython2.6.so.1.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 librt.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 librt.so.1(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libSM.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libssl.so.0.9.8()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6(CXXABI_1.3.1)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6(CXXABI_1.3)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6(GLIBCXX_3.4)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6(GLIBCXX_3.4.9)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libtiff.so.3()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libutil.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libX11.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libXinerama.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libXm.so.4()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libXt.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libXxf86vm.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64

    Read the article

  • Whats consuming HDD Space

    - by Umair Mustafa
    I have single partition of 92GB in which I installed Ubuntu 12.04. And for some Unknown reason a message pop ups saying that I only have 1GB of HDD space left. I ran command sudo du -hscx * on / and /home /home gave me this result 4.0K C:\nppdf32Log\debuglog.txt 0 convertedvideo.avi 176M Desktop 16K Documents 169M Downloads 4.0K examples.desktop 17M file.txt 4.0K Music 984K Pictures 4.0K Public 320K Red Hat 6.iso 2.5M syslog-ng_3.3.6.tar.gz 4.0K Templates 8.0K terminal.png 1.2M Thunderbird Attachments 698M ubuntu10.04LTS.iso 16K Ubuntu One 4.0K Untitled Folder 4.0K Videos 21G VirtualBox VMs 22G total And / gave me this result 81G home 0 initrd.img 0 initrd.img.old 833M lib 16K lost+found 68K media 4.0K mnt 260M opt du: cannot access `proc/8339/task/8339/fd/4': No such file or directory du: cannot access `proc/8339/task/8339/fdinfo/4': No such file or directory du: cannot access `proc/8339/fd/4': No such file or directory du: cannot access `proc/8339/fdinfo/4': No such file or directory 0 proc 640K root 908K run 8.6M sbin 4.0K selinux 4.0K srv 0 sys 148K tmp 3.3G usr 436M var 0 vmlinuz 0 vmlinuz.old 86G total If you look at the result returned by / it shows that /home is consuming 81GB but on the other hand /home returns only 22GB. I cant figure out whats consuming the HDD. I have not installed anything except Virtual Machines Perpetrator found using Disk Usage Analyzer

    Read the article

  • Can't download web photo albums to Picasa

    - by Arcadie
    Someone has shared a Picasa web album (Limited, anyone with the link), but I can't download it to Picasa. The following alert appears: Firefox doesn't know how to open this address, because the protocol (picasa) isn't associated with any program. I have Picasa 3.0.0 installed on Ubuntu 11.04, I remember it saying something about registering the picasa protocol with Firefox during the installation. I have Firefox 6.0.2, and these settings are present in about:config network.protocol-handler.app.picasa;/usr/bin/picasa network.protocol-handler.expose.picasa;true network.protocol-handler.external.picasa;true Picasa is located here: $ which picasa /usr/bin/picasa Is there something I can do to make this work? PS: I hope this is not off-topic here, and I can't find the "picasa" tag. Could someone please add it, if appropriate?

    Read the article

  • Gnome Terminal tabs ugly and oversized

    - by adamnfish
    Both gnome terminal and terminator (which I am using on my laptop these days) can be customised to look very pretty. By using full screen and keeping desktop clutter down to a minimum it's possible to get a good-sized area to work in, even on my little EeePC. However, there is one element that I don't seem to be able to control. Gnome's tabs are massively oversized and ugly at best. They don't fit into the theme at all which looks silly, but for me the biggest problem is the screen real estate that is wasted. On a small laptop screen in particular, it's a real problem. Is there a way to change these tabs? I realize it's possible to put them up the side of the window, but then they take up even more space! If this isn't possible with theme-ing or gnome configuration, are there any terminal programs like terminator that can handle the tabs themselves? (Ideally in a more elegant fashion!)

    Read the article

  • What to do when:"The following packages have unmet dependencies"

    - by André Izquierdo
    When I try to install Wine, PlayonLinux, and some other programs, I get the following message: At the terminal: The following packages have unmet dependencies: wine : Depends: wine1.5 but it is not going to be installed E: Unable to correct problems, you have held broken packages. At the software center: Package dependencies cannot be resolved This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time. I already tried installing them with "aptitude" and failed. I am running Ubuntu 12.10 Please help! I've had this problem for a while now and don't know what to do!

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >