Search Results

Search found 3942 results on 158 pages for 'sound'.

Page 93/158 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• Strange messages on new Dell Workstation during bootup

  - by dan99t

  I recently installed Windows 7 Ultimate on a new Dell T-7500 Workstation, and am seeing some strange messages on the screen: Dell SAS 6 Host Bus Adapter BIOS MPTBIOS 6.22.03.00 ( 2008.08.06 ) Initializing….. Press Ctrl – C to run SAS Configuration Utility Searching for Devices at HBA 0….. Dell MPT Boot ROM Successfully installed Then it loads Windows 7. All of above happens on its own, I don't touch anything. So what is going on & what do I have to do get rid off those initializing commands ? I have never had this happen to any previously owned Dell systems. Also I haven't installed any drivers yet but Sound, Video & Internet does work. Do I need to install any additional drivers?

  Read the article

• Use external speakers with laptop hooked to separate monitor?

  - by lhan16

  I have a laptop with a set of external speakers hooked up to it on my computer desk. The speakers use the standard 3.5mm audio (headphones) jack. The speakers work fine, but I've recently added a separate monitor to my laptop via HDMI. With the monitor hooked up to my laptop and the speakers still hooked up to the laptop, sound will only come out of the built-in monitor speakers. When I look at my audio settings, there are three different "audio playback devices" showing up, but only the built-in monitor speakers make noise when I click "test" (and I hear nothing when I set any of the other devices as the default. Does anyone know how I can still use my external speakers when using a separate monitor with my laptop? I'm hoping there is a solution that doesn't require the laptop to be open or closed, because I use both scenarios. I came across this post, but it doesn't look like they had much luck.

  Read the article

• USB hard drive doesn't graceful power off after eject on Windows 7

  - by Sim

  I have a couple of Seagate FreeAgent Go external USB hard drives and would like them to gracefully power off after ejecting in Windows 7. With Windows XP a few seconds after they are ejected they gracefully power off. When ejecting them on Windows 7 they just stay on and have to be physically disconnected before they lose power. I have checked the hard drive removal policy and it is set to quick removal. I have also looked in the Seagate forums but I couldn't find any info on this so I thought I'd ask the SuperUser community on any ideas why the difference and how to get the same behaviour in Windows 7 as in XP? Update: I am finding that this also happens with USB thumb drives as well. My current theory is that there were changes to the driver model with Vista/Win 7 that haven't been reflected in the device drivers yet. So things that worked under XP don't under Win7 as the drivers haven't been updated for the new model. Does that sound right?

  Read the article

• Adding IP address to OpenVZ VPS (OpenVZ Web Panel)

  - by andy

  I apologise if I sound at all dumb. This is my first dedicated server having used a VPS for over a year and I'm trying to setup a VPS on this new server. I purchased a subnet from my hosting provider that I believe allows me 6 usable IP addresses: 177.xx.xxx.201 - 177.xx.xxx.206 The subnet address looks like this: 177.xx.xxx.200/29. I've gone on my server and added them like it said on a wiki like so: ip addr add 177.**.***.201/29 dev eth0 I done that for all six and now when I go to them in the browser they point to my server. The problem is, I'm using OpenVZ web panel to create VMs (http://code.google.com/p/ovz-web-panel/) so I created a VM and assigned one of those IPs to it. However when SSHing to that IP it SSH's to the dedicated server and not the VM. Am I missing something?

  Read the article

• connect 2.1 stereo speakers to LG LCD-TV (5500 series)

  - by rMaero

  I bought a pair of speakers for my dad's TV, LG 32LE5500. When I installed them, it just sounded worse than the integrated ones and that's where I realized the subwoofer didn't work at all and both speakers make lower volume than the internal ones. The audio output jack says "H/P" (standing for headphones, and a matching symbol) before buying I checked this output with my phone's headphones and it worked so I figured it would work with a set of speakers since it's a standard audio output. I guess it's literally for headphones and not any other kind of sound players. There is only one other audio output and it is the optical-digital, so I can't use that. Not at least with these speakers.. am I screwed? or is there any workaround?

  Read the article

• Driver to split audio to 2 different devices?

  - by ThantiK

  I recently bought one of these USB headsets against my own better judgement, and it's really costing my sanity at this point. Previously when using a standard jack, I just used a splitter so I could split off the things I was doing with my TV or headset, I could just turn the TV off or the headset volume down should I want to use one at a time. Now, along comes this USB headset and I find that I can't choose for the sound of 1 application to pipe to 2 different devices on Windows; How can I solve this? Does any software out there exist for this purpose?

  Read the article

• 2 ATI Radeon HD 5870 (crossfire): Intermittent loud fan and non-functioning secondary card

  - by Merritt

  Installed 2 5870s. Left off the left side panel of my case(cooler master haf x), started my computer, installed the drivers and set up the crossfire... yada yada yada... everything worked fine. Then turned off computer, put left side panel back on, turned on computer, and heard a very loud buzzing (asssuming it was a gpu fan). Checked status of cards (in Windows 7) and the secondary card did not appear. Turned off the computer, took off left side panel, jiggled power connectors into secondary card, then turned the computer back on, and it worked again. Put the panel on, turned on computer, worked. Sometime later, turned on computer, and there's that loud fan sound again. What gives?

  Read the article

• graphics cards with no HDMI output

  - by Noam Gal

  I am currently looking at Gainward GTX260 896MB GS GLH, but I've seen it also on the x275 version - the card doesn't have an HDMI output, only two dvi and one tv out (s-video?). They claim they support HDMI using a dvi-HDMI converter. Will I get a true high definition quality on my TV (assuming it supports it) like that? Or is it not as good, and I should stick to cards that have an HDMI output (ATI), or pay way too much for x295? What about connecting the audio? The x260 comes with an internal spdif cable - does that mean I can connect my soundcard to my graphics card, and have the audio come out through the dvi, and into the HDMI cable? Or am I mixing it all up here, and I have to somehow connect the sound to the TV using a seperate cable (Hoping it has a seperate audio-in for the HDMI channel)?

  Read the article

• Realtek HD Audio 5.1 Optical Input (from Xbox 360)

  - by Shevek

  I'm trying to connect up my Xbox 360 digital audio to my 5.1 speakers via my PC (my LCD has dual input, DVI for the PC, D-SUB for the Xbox). The motherboard has a Realtek ALC888 chipset and I have a 5.1 speaker system connected via 3 x 3.5mm jacks (FR/FL, RR/RL, C/LFE) and I get full 5.1 output from the PC. I have connected the optical audio cable from the Xbox to the Optical In on the motherboard's backplate. With the Xbox in Digital Stereo mode I get 2 channel audio from the Xbox, through the PC, to the speakers. With the Xbox in Dolby Digital 5.1 mode I get no sound at all. I have the latest Realtek drivers installed in Win 7 32-bit. Questions: Is it possible to use the full 5.1 DD from the Xbox? If so, am I missing some option(s) in the Realtek setup? Do I need some other piece of software to do this? (AC3Filter or FFDShow perhaps) Many thanks

  Read the article

• Weird video problem with Linux variants

  - by alex

  I decided recently I wanted to give Linux a go so I first download a Ubuntu boot CD. The boot menu came up fine, and then a glowing Ubuntu logo was in the middle of the screen for a while. Then the screen was flickering orange and black. I guess this is where the GUI should of came up. Pushing Ctrl+Alt+F1 brought me to the command prompt OK. I thought this may have something to do with Ubuntu, so I downloaded Linux Mint. The same sort of thing happened. It booted fine, displayed it's logo for a while and then flickered, only green and black this time. Does this sound like a video card problem? How can I resolve this? Many thanks

  Read the article

• OS X Headphone jack issue [closed]

  - by Alex Coady

  Possible Duplicate: Optical Audio out stuck on on a MacBook When I plug my headphones into my iMac (27-inch, Mid 2011; OSX 10.8.1) and try to adjust the volume, the volume popup shows a greyed out speaker and there's a circle with a line through it signalling that it isn't working. I've tried the headphones with my iPhone, other iMacs etc and they're fine. This is incredibly frustrating. Other headphones don't generally work either. In Sound preferences the headphones are being listed as "Optical digital-out port" which is incorrect and would explain the problem, but doesn't help me fix it. Any ideas?

  Read the article

• Git version control with multiple users

  - by ignatius

  Hello, i am a little bit lost with this issue, let me explain you my problem: I want to setup a git repository, three of four users will contribute, so they need to download the code and shall be able to upload their changes to the server or update their branch with the latest modifications. So, i setup a linux machine, install git, setup the repository, then add the users in order to enable the acces throught ssh. Now my question is, What's next?, the git documentation is a little bit confusing, i.e. when i try from a dummy user account to clone the repository i got: xxx@xxx-desktop:~/Documentos/git/test$ git clone -v ssh://[email protected]/pub.git Initialized empty Git repository in /home/xxx/Documentos/git/test/pub/.git/ [email protected]'s password: fatal: '/pub.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly is that a problem of privileges? need any special configuration? i want to avoid using git-daemon or gitosis, sorry, maybe my question sound silly but git is powerfull but i admit not so user friendly. Thanks Br

  Read the article

• PSU Suggestions for SLI EVGA GTX 680 + i7

  - by JMH

  So i am putting together a new machine and am trying to determine the best PSU to go with for this setup. Here is the build i am thinking about Processor Intel Core i7-3770K Ivy Bridge 3.5GHz Motherboard ASRock Z77 Professional Graphics Card (2 SLI) EVGA 02G-P4-2680-KR Sound Card HT | OMEGA eClaro 7.1 Fan/Heat Sync ZALMAN CNPS9500A-LED Case COOLER MASTER HAF X RC-942-KKN1 RAM G.SKILL Ripjaws X Series 32GB (4 x 8GB) SSD Of some Sort So my guess is that i need a 750 -1000W PSU, but which brand.... how much, etc --- really in the woods. Thanks -Josh

  Read the article

• My 5.1 audio system not working properly when I connect to Internet

  - by Gemboz

  I just bought a Genuis 5005 5.1 audio system, and I have an issue with it: It won't work properly when I get on the Internet (the central speaker isn't working). I also bought an Asus Xonar DG 5.1 sound card which works perfectly. I installed it and also installed the driver for it. When I play music/videos from my hard drive, all the speakers work fine, but when I connected to Internet to play videos/music, the center speaker won't work. How can I fix this issue?

  Read the article

• Sustaining Dual Channel among many RAM modules

  - by Odys

  I'd like to know what are the factors that need to be set in order to sustain the Dual Channel mode. In a mobo with 4 DDR3 slots: Do I have to put pair of chips? Eg: If I put 3 identical chips only, will I have Dual channel or not? If I put 4 Ram chips that aren't from of same ventor/model, will I have the same latency among them (the highest of all)? Also, will I sustain Dual Channel mode? If one Ram has max frequency of 1033 and the other 3 chips are of 1300, will I have 1033Mhz for all chips and Dual Channel mode on? What if I put 2x4Gb and 2x8Gb chips (latency, Dual Channel)? Can I put 4Gb chips in slots 1 and 3 and 8Gb in slots 2 and 4 and still have dual channel mode enabled? (Some of the questions might sound silly but their answers aren't that clear to me) (Also, assume that there aren't any bottlenecks because of other parts on the system)

  Read the article

• Help with dynamic range compression function (audio)

  - by MusiGenesis

  I am writing a C# function for doing dynamic range compression (an audio effect that basically squashes transient peaks and amplifies everything else to produce an overall louder sound). I have written a function that does this (I think): public static void Compress(ref short[] input, double thresholdDb, double ratio) { double maxDb = thresholdDb - (thresholdDb / ratio); double maxGain = Math.Pow(10, -maxDb / 20.0); for (int i = 0; i < input.Length; i += 2) { // convert sample values to ABS gain and store original signs int signL = input[i] < 0 ? -1 : 1; double valL = (double)input[i] / 32768.0; if (valL < 0.0) { valL = -valL; } int signR = input[i + 1] < 0 ? -1 : 1; double valR = (double)input[i + 1] / 32768.0; if (valR < 0.0) { valR = -valR; } // calculate mono value and compress double val = (valL + valR) * 0.5; double posDb = -Math.Log10(val) * 20.0; if (posDb < thresholdDb) { posDb = thresholdDb - ((thresholdDb - posDb) / ratio); } // measure L and R sample values relative to mono value double multL = valL / val; double multR = valR / val; // convert compressed db value to gain and amplify val = Math.Pow(10, -posDb / 20.0); val = val / maxGain; // re-calculate L and R gain values relative to compressed/amplified // mono value valL = val * multL; valR = val * multR; double lim = 1.5; // determined by experimentation, with the goal // being that the lines below should never (or rarely) be hit if (valL > lim) { valL = lim; } if (valR > lim) { valR = lim; } double maxval = 32000.0 / lim; // convert gain values back to sample values input[i] = (short)(valL * maxval); input[i] *= (short)signL; input[i + 1] = (short)(valR * maxval); input[i + 1] *= (short)signR; } } and I am calling it with threshold values between 10.0 db and 30.0 db and ratios between 1.5 and 4.0. This function definitely produces a louder overall sound, but with an unacceptable level of distortion, even at low threshold values and low ratios. Can anybody see anything wrong with this function? Am I handling the stereo aspect correctly (the function assumes stereo input)? As I (dimly) understand things, I don't want to compress the two channels separately, so my code is attempting to compress a "virtual" mono sample value and then apply the same degree of compression to the L and R sample value separately. Not sure I'm doing it right, however. I think part of the problem may the "hard knee" of my function, which kicks in the compression abruptly when the threshold is crossed. I think I may need to use a "soft knee" like this: Can anybody suggest a modification to my function to produce the soft knee curve?

  Read the article

• DNS updating issue

  - by Will

  Hey guys, I'm new to serverfault so please excuse me if I sound a tad nub. I work in an environment that is kinda peace mealed together, and I honestly don't know how it works. I'm new to the IT field and am still in school. When I replace a PC I rename the old one to mo-o-pcname and give the new one the proper name of mo-pcname (mo is a location thing we use so it really doesn't apply to the problem.) The new PC will function on the network; it will have the ability to access network resources (printers, file shares, etc) and it will have the ability to get out to the internet. However I can no longer ping the machine. It would appear as if the DNS (A) record is not getting updated or something. Like I said I'm kinda new to the field and just trying to work through this problem. Thanks for your help.

  Read the article

• Software available for singing "lessons" via computer microphone?

  - by drozzy

  Looking for a software to help my friend learn to sing. Can't seem to find anything on googles. Does there exist software (preferably downloadable and from this century!) that records one's voice and then analyzes it to see how "accurate" it was. It would be great if it also had some kind of "lessons" of some sort, and not simply sound recorder that shows waveforms. I can't imagine it would be so hard to implement, and there probably is one out there - I just can't find it. Any recommendations are welcome. Thanks.

  Read the article

• Using Thunderbird and gmail, sent items appear as unread in "All Mail"

  - by Trevor

  I'm using a gmail account in Thunderbird. When I send a message, a new mail notification appears (sound and system try icon), an unread message appears in the gmail All Mail folder, and the account name turns blue. I have to click on "Sent Mail" or "All Mail" to get rid of the notification. Unsubscribing from "All Mail" is not effective (it still turns the account name blue). This seems to be popping up elsewhere (example), but nobody has posted a helpful answer. How do I keep Thunderbird from thinking that a sent message is new unread mail in the All Mail folder?

  Read the article

• What are the minimum hardware requirements for the latest version of Android Jelly Bean OS?

  - by Stom

  I searched around, and there's no information that points exactly to the suggested, minimum, or otherwise dated information containing specifications on this. I want to install a newer version of Android on an older ZTE-X500 MetroPCS smartphone. However, I'd like to know the backwards compatibility in regards to using a newer featured OS with lackluster, limited hardware compared to today's smartphones, such as Galaxy S4. However, I still wish to do this. If Jelly Bean is too demanding, I will set up Honeycomb, or get a modified Honey Comb ROM, or tweak the source to my preferences. However, nothing outlines the specifics of the "system requirements" it suggests for optimum performance, such as RAM, processor speed, processor features, and/or any other features, like DMA, video circuit advancements, and/or sound and special hardware requirements noted as well. Please, if you will, point me to a source that mentions this, and please tell do not link me to any PDF file formats. Thank you. PS: I'm a computer programmer.

  Read the article

• Her microphone produces white noise, after a while?

  - by Wolfpack'08

  When my friend Skypes with me or gets on FB Video with me, her sound works fine... at first. After a bit, it starts sounding like loud static. It happens more frequently as we restart video chats, until it happens as soon as we open video chats. We usually restart her PC to fix the issue. Is there a process we could kill, maybe? Skip that question, if you will, and jump to these two: How do we fix this? Why is this happening?

  Read the article

• deploying a Python application from a PHP developer

  - by user1218776

  I'm a little confused on the deployment process for Python. Let's say you create a brand new project with virtualenv source bin/activate pip install a few libraries write a simple hello world app pip freeze the dependencies When I deploy this code into a machine, do I need first make sure the machine is sourced before installing dependencies? I don't mean to sound like a total noob but in the PHP world, I don't have to worry about this because it's already part of the project. All the dependencies are registered with the autoloader in place. The steps would be: rsync the files (or any other method) source bin/activate pip install the dependencies from the pip freeze output file It feels awkward, or just wrong and very error prone. What are the correct steps to make? I've searched around but it seems many tutorials/articles make an assumption that anyone reading the article has past python experience (imo).

  Read the article

• Music but no voice on headphones

  - by TFD

  I have normal stereo headphones which work fine On a specific PC running Windows 7 the external speaker and USB speakers work fine too But when I plug in the headphones, all I hear is muffled music, no voice track? It sounds like it is being split into 5.1, and I am getting just the L & R components, and not the centre voice channel? In the Playback devices (sound) control panel, I can adjust stereo or 5.1 for external speakers or USB speakers, but not for the headphones. The config button is grey out for them Is this the problem, if so how do I fix it?

  Read the article

• How do you create a dynamic excel chart?

  - by Haris

  I am looking at creating an Excel chart that offers some interactivity. Basically, at the moment I have a chart that is detailing progress (in %) using bars. But that progress is usually made up of several other aspects. So you could have an overall progress of say 50% which would then be broken down into Graphics 75%, Sound 25%, Gameplay 50%. Now what I'd like to do is find a way to stack those bars, so that I have the bar showing the overall progress and only when I click on that bar the other, more detailed progress bars appear. Is there a way to do this in Excel? Thanks in advance!

  Read the article

• How tot track which program causes my harddrive to spin up

  - by Andreas

  I have a strange problem: Every half hour one of my hard disks gets powered on again. I recognize this by the sound of a hard disk spinning up. So far I was not able to track which program could cause this. I ran Process Monitor to see whether there is an I/O peak coinciding with the spin-up. I checked Windows event viewer if there is an appropriate event at the same time Any ideas other than the usual disabling-services/programs etc. (which would be my next investigation step)? Also, it would be helpful to have a program that shows the current power status of all my drives, if there is one. Harddisk Sentinel unfortunately cannot do the job because it powers on all drives upon start and prevents their going into sleep mode. Thanks in advance. :)

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >