Search Results

Search found 65206 results on 2609 pages for 'real time'.

Page 934/2609 | < Previous Page | 930 931 932 933 934 935 936 937 938 939 940 941  | Next Page >

  • Router recommendation to virtualize 800 IPs

    - by delerious010
    I've recently been looking at getting some new load balancers for our environment as we are expecting to double our client base in the next 12 months. Currently we have 400 public IPS serving 800 clusters ( 2 clusters / IP due to ports ) on Coyote Point Balancers, and distributing connections to 3 web servers serving about 6GBytes outgoing, 2Gbytes in per day. If we double, this would be about 800 IPs, possibly 1600 clusters, and about 6 servers per cluster ( for a total of 9600 so called "real servers" using Barracuda's lingo ). Due to the amount of clusters, most solutions I've looked at ( Coyote, Barracuda, Loadbalancer.org ) seem to be unsure whether they'll be able to handle our planned growth, mostly due to health checks performed on the servers ... which makes total sense when you think of it. So the fine folk at loadbalancer.org recommended that we may be better off offload the 400-800 public IPs, which we require for SSL eCommerce solutions, over to a forward facing router. From that point on, the router could do some mangling to route EXT_IP:443 to INT_IP:INT_PORT which would then allow us to reduce the Load Balancer configuration to 1 or 2 clusters, thus resolving the health check problem. Does this idea make sense to yall ? Or would you have other recommendations to make ? Secondly, what router would you recommend for such an undertaking ? I'd be looking at something that has some form of failover mechanism built in. On a totally unrelated note, I've got to admit that I'm extremely pleased with the responses I got from loadbalancer.org. Their responses to my inquiries were surprisingly helpful ( i.e. I didn't feel as if I was taking to a sales guy trying to push something ). ( No I don't work for them, and sadly nor are they sending me free gear ).

    Read the article

  • Ping server NETBIOS name returns wrong IP and "Destination host unreachable"

    - by music2myear
    Problem server is Windows 2008 R2 VM running on VMWare ESXi 4 host. Single network adapter manually assigned single IP address (192.168.1.11). When I ping the server from any other network computer, it returns 192.168.1.124 and "Destination host unreachable". Yesterday I found a second network adapter assigned to this server with an IP of 169.254... indicating it had no real valid IP. Using the MAC addresses I determined which adapter was not needed/not wanted, and removed it using VMWare systems. This is the network Printer Server and, understandably, nothing is printing right now. I've looked at the solutions here Why was my ping answered by a different IP address than the one pinged? and they aren't applicable to my situation for the following reasons: Output of arp -a on another computer returns the correct IP address (.1.11) assigned to the correct MAC address, the incorrect IP .1.124 is not listed, and the MAC of the network adapter I removed yesterday is not listed at all. I checked out the Microsoft KB article which listed pretty much my exact symptoms ( http://support.microsoft.com/kb/981953 ) and it says to check binding orders and look for hidden adapters. But there are no hidden adapters, and there is only one Network Adapter listed in the Binding Order list. Essentially, I can communicate from the server TO any other network device, but I cannot communicate from any other network device TO the server. Help! UPDATE: Solution found, see this solution for the details.

    Read the article

  • How to recover a Linksys WRT54GL router that has a blinking green power LED and no response from the

    - by Peter Mounce
    I was flashing the router with the Tomato firmware, but something went wrong; I'm not sure what. Now, the router responds to ping at 192.168.1.1 (my Mac's on a static IP 192.168.1.21), but the web-interface doesn't come up. I have read that this situation is recoverable in a [couple of places][2], but I haven't been having much success and so I wondered whether anyone could help. From my Mac (OSX 10.5) I have tried to tftp a new vanilla-Linksys firmware to the router and reboot; according to the trace, this sends it but the router behaves no differently after a reboot. I've read that if boot_wait is turned on, I'll have an easier time, but I haven't been able to find any instructions that tell me how I can tell whether I did this or not (I don't think I have, but I might have, when I tinkered the first time months ago - the router has worked since then, though). I have found a couple of references to [something called JTAG][3], which seems like some kind of [homebrew diagnostic cable thing][4], but that's a little beyond my ken. Happy to try it, with muppet-level instructions, though (I do software, not hardware!). So, I'm at a bit of a loss, really, and wondered whether anyone could provide me with the route (ha. ha.) out of this mess? Hm, I can't post all the links I wanted to until I have some more reputation.

    Read the article

  • A star vs internet routing pathfinding

    - by alan2here
    In many respects pathfinding algorythms like A star for finding the shortest route though graphs are similar to the pathfinding on the internet when routing trafic. However the pathfinding routers perform seem to have remarkable properties. As I understand it: It's very perfromant. New nodes can be added at any time that use a free address from a finite (not tree like) address space. It's real routing, like A*, theres never any doubling back for example. IP addresses don't have to be geographicly nearby. The network reacts quickly to changes to the networks shape, for example if a line is down. Routers share information and it takes time for new IP's to be registered everywhere, but presumably every router dosn't have to store a list of all the addresses each of it's directions leads most directly to. I can't find this information elsewhere however I don't know where to look or what search tearms to use. I'm looking for a basic, general, high level description to the algorithms workings, from the point of view of an individual router.

    Read the article

  • nginx: SSI working on Apache backend, but not on gunicorn backend

    - by j0nes
    I have nginx in front of an Apache server and a gunicorn server for different parts of my website. I am using the SSI module in nginx to display a snippet in every page. The websites include a snippet in this form: For static pages served by nginx everything is working fine, the same goes for the Apache-generated pages - the SSI include is evaluated and the snippet is filled. However for requests to my gunicorn backend running a Python app in Django, the SSI include does not get evaluated. Here is the relevant part of the nginx config: location /cgi-bin/script.pl { ssi on; proxy_pass http://default_backend/cgi-bin/script.pl; include sites-available/aspects/proxy-default.conf; } location /directory/ { ssi on; limit_req zone=directory nodelay burst=3; proxy_pass http://django_backend/directory/; include sites-available/aspects/proxy-default.conf; } Backends: upstream django_backend { server dynamic.mydomain.com:8000 max_fails=5 fail_timeout=10s; } upstream default_backend { server dynamic.mydomain.com:80; server dynamic2.mydomain.com:80; } proxy_default.conf: proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; What is the cause for this behaviour? How can I get SSI includes working for my pages generated on gunicorn? How can I debug this further?

    Read the article

  • User directive in nginx generates error despite running as UID root

    - by Joost Schuur
    I'm running nginx on a MacOS X machine, installed with brew, and when I launch nginx, even with sudo, I get the following warning in my log file over and over again: 4/21/11 2:03:42 AM org.nginx[3788] nginx: [warn] the "user" directive makes sense only if the master process runs with super-user privileges, ignored in /usr/local/etc/nginx/conf/nginx.conf:2 From nginx.conf: user jschuur staff; I'm already launching nginx with sudo, since I want the thing to listen on port 80. Shouldn't that be enough to give it the proper super user privileges? The nginx binary as it's installed: jschuur@Glenna:sbin ? master ls -la total 4544 drwxr-xr-x 3 jschuur staff 102 Apr 12 20:53 . drwxrwxr-x 15 jschuur staff 510 Apr 12 15:25 .. -rwxr-xr-x 1 jschuur staff 2325648 Apr 12 20:39 nginx FWIW, I recompiled the binary to set passenger up and moved it around from it's original location into /usr/local/sbin. Update: As it turns out MacOS X was restarting nginx after I'd stopped it, because the launchd plist in ~/Library/LaunchAgents had set it to 'KeepAlive'. However, because I installed this plist into my local user's LaunchAgents folder as opposed to /Library/LaunchAgents (or better yet /Library/LaunchDaemons, which run before you even log on), it wasn't executed as root. Because of an error about not having permissions to use port 80, it actually exited right away, but still wrote to the same log file as the nginx process I started with sudo. I had thought the errors stemming from the automatic restart were actually coming from my manual restart via sudo. So, bottom line, problem solved. The real problem here was the homebrew instructions specifically asking you to install the plist file into an area that wouldn't allow a local site to use port 80.

    Read the article

  • Changes to grub in ubuntu 10

    - by jdege
    I've been running CentOS 5 for some years. I've decided to upgrade to Ubuntu, and with 10.04 just out, this seemed like a good time. I'm a tad paranoid, so I started off with a new set of drives - one to install on, one to backup to, and one as a spare. I removed my existing CentOS 5 drives, and did an install, and had no problems. I installed the server version, and used the default full-disk LVM installation. Next, I copies my backup scripts over, edited them to work with the new configuration, and did a test backup. That worked fine, as well. Then comes the real test, could I do an install of the backup onto the spare drive? (I won't put anything of importance on a system that doesn't have a reliable backup, and if I've never done a restore, it's not reliable.) I booted from a System Rescue CD (ver 1.5.3), with the spare drive as /dev/sda, and the backup drive as /dev/sdb. I had no trouble in partitioning, configuring LVM, formatting, making swap, or restoring the file systems. But when I got to restoring grub to the MBR, I ran into problems. My restore instructions from CentOS 5 said run grub, then enter two commands: root (hd0,0) setup (hd0) The first command exits with an error: "Checking if /boot/grub/stage1 exists ... no" I did some googling around, and found that the Grub2 included in recent Ubuntus is very different than the Grub 0.97 included in CentOS 5. One site suggested I use: grub-install --root-dir=/mnt/restore /dev/sda That appeared to work, but when I booted from the drive, I ended up at a grub prompt. Any ideas as to what I need to do? It seems like a simple problem, but my attempts at searching out answers on the web are being swamped by references to the old version of Grub. Help would be appreciated.

    Read the article

  • Geographically distributed file system with preferred locality

    - by dpb
    Hi All -- I'm building a application that needs to distribute a standard file server across a few sites over a WAN. Basically, each site needs to write a lot of misc files of varying size (some in the 100s MB range, but most small), and the application is written such that collisions aren't a problem. I'd like to have a system set up that meets the following qualifications: Each site can store files in a shared "namespace". That is, all the files would show up in the same filesystem. Each site would not send data over the WAN unless necessary. I.e., there would be local storage on each side of the WAN that would be "merged" into the same logical filesystem. Linux & Free ($$$) is a must. Basically, something like a central NFS share would meet most of the requirements, however it would not allow the locally written data to stay local. All data from remote sides of the WAN would be copied locally all the time. I have looked into Lustre, and have run some successful tests with it, however, it appears to distribute files fairly uniformly across the distributed storage. I have dug through the documentation and have not found anything that automatically will "prefer" local storage over remote storage. Even something that went with the lowest latency storage would be fine. It would work most of the time, which would meet this application's requirements. Any ideas?

    Read the article

  • How can I write automated tests for iptables?

    - by Phil Frost
    I am configuring a Linux router with iptables. I want to write acceptance tests for the configuration that assert things like: traffic from some guy on the internet is not forwarded, and TCP to port 80 on the webserver in the DMZ from hosts on the corporate LAN is forwarded. An ancient FAQ alludes to a iptables -C option which allows one to ask something like, "given a packet from X, to Y, on port Z, would it be accepted or dropped?" Although the FAQ suggests it works like this, for iptables (but maybe not ipchains as it uses in the examples) the -C option seems to not simulate a test packet running through all the rules, but rather checks for the existence for an exactly matching rule. This has little value as a test. I want to assert that the rules have the desired effect, not just that they exist. I've considered creating yet more test VMs and a virtual network, then probing with tools like nmap for effects. However, I'm avoiding this solution due to the complexity of creating all those additional virtual machines, which is really quite a heavy way to generate some test traffic. It would also be nice to have an automated testing methodology which can also work on a real server in production. How else might I solve this problem? Is there some mechanism I might use to generate or simulate arbitrary traffic, then know if it was (or would be) dropped or accepted by iptables?

    Read the article

  • Is it possible to trace the delegation path for a DNS lookup?

    - by Josh Glover
    I'm trying to determine why a Nagios host check is failing (hostnames and IPs have been changed to protect the guilty): : jmglov@laurana; host www.foo.com ;; connection timed out; no servers could be reached : jmglov@laurana; for ns in `grep -o '\([0-9]\+[.]\)\{3\}[0-9]\+$' /etc/resolv.conf`; do ping -qc 1 $ns; done PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 10.911/10.911/10.911/0.000 ms PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data. --- 192.168.1.2 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.241/0.241/0.241/0.000 ms So I know that my nameservers are reachable, meaning that some nameserver along the delegation path to the authoritative nameserver for my host is not responding. Is there an easy way to determine which nameserver this is (basically a traceroute for DNS)?

    Read the article

  • How do I install the latest version of packages in Ubuntu?

    - by Roman
    For example I want to install the latest version of "numpy". I type the following: "sudo apt-get install python-numpy". When I type this the first time it installs something and if I type this the second time it writes that I have already the latest version of numpy. However, I see that my version of numpy is 1.1.1. and I know that it NOT the latest version. Why it happens and how this problem can be solved? I can find the *tar.gz file with the latest version, I can extract files with the archive and than I need to rune one of the scripts which will be somewhere among the extracted files. But I do not like this way. It is too complicated. I do not know where I should put all these files, I do not know which dependencies I should install before I run the script for the installation of numpy, I do not know where numpy will be put after installation and so on. Is there an easy way to get the latest version of numpy?

    Read the article

  • Analyze a BSOD (irql_less_than_or_equal)

    - by Bruno Reis
    Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

    Read the article

  • Virus / Malware: Explorer window with strange user logged into Hotmail

    - by abel
    I was looking into a PC, the user of which had complained that he couldn't connect to the internet and that the PC was experiencing random restarts. The PC runs WinXP SP3. On examination, I found that the Wireless Zero Configuration service was stopped. I enabled that and the internet was back on(The pc connected through wifi). Then I started firefox and browsed to gmail.com. I did not launch any other program, except for a few explorer windows. It was then I noticed a window had popped up(it was not a pop up). It had the explorer folder icon and instead of explorer folder contents, it showed a hotmail page, with a user named "Homer Stinson" logged in. The titlebar was empty and there were no toolbars. I asked the client whether this was his email id, which he said it was not. I opened task manager, which did not show this explorer window in it's Application tab. I switched back to the 'rogue' window and found that the hotmail settings page was now open, which later changed to the hotmail edit profile page for the same user. I was not clicking anything. Then suddenly the window closed. I checked the autorun locations, fired up a Malwarebytes Anti Malware scan which gave a clean result. The system also had an updated installation of AVG. I don't want a solution for this virus(?) problem. I asked this here because I wanted to know if somebody has come across something similar. What kind of malware can this be? The user had not seen a similar window before and I should have taken screenshots. (PS:Homer Stinson is an imaginary name. I searched for the other real name with some relevant keywords but could not come up with a virus/malware discussion post.) UPDATE: When I checked the PC later a DEP error had popped up closing which restarted the PC.

    Read the article

  • Access Windows Boot Manager selector when timeout is set to 0?

    - by Kyle Cronin
    I've installed Wubi onto a Windows Vista computer. I've also set the boot timeout to 0: bcdedit /timeout 0 However, now I can't figure out how to get the menu to come up at all! I read on the internets that I had to hold F8 or space when starting up, but they doesn't seem to do anything. Is there a different key or setting I've overlooked? The computer itself is a Dell that's a few months old. The keyboard is USB, but I don't think that's the problem as I can get into the BIOS just fine. Maybe I'm doing it wrong? Am I supposed to hold the keys or rapidly tap them (I've tried both)? If it helps, here's the output from bcdedit: C:\Windows\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=C: description Windows Boot Manager locale en-US inherit {globalsettings} default {current} resumeobject {5460d9d2-d391-11dc-9d9f-aba67a8797c5} displayorder {current} {e2484fe7-5e97-11de-84d4-0024e8074422} toolsdisplayorder {memdiag} timeout 0 resume No Windows Boot Loader ------------------- identifier {current} device partition=C: path \Windows\system32\winload.exe description Windows Vista locale en-US inherit {bootloadersettings} recoverysequence {572bcd55-ffa7-11d9-aae0-0007e994107d} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {5460d9d2-d391-11dc-9d9f-aba67a8797c5} nx OptIn Real-mode Boot Sector --------------------- identifier {e2484fe7-5e97-11de-84d4-0024e8074422} device partition=C: path \ubuntu\winboot\wubildr.mbr description Ubuntu

    Read the article

  • Git fails to push with error 'out of memory'

    - by jwir3
    I'm using gitosis on a server that has a low amount of memory, specifically around 512 MB. When I try to push a large folder (happens to be a backup from an android phone), I get: me@corellia:~/Configs/$ git push origin master Counting objects: 18, done. Delta compression using up to 8 threads. Compressing objects: 100% (14/14), done. fatal: Out of memory, malloc failed MiB | 685 KiB/s error: pack-objects died of signal 13 error: failed to push some refs to 'git@dagobah:Configs' I've been searching the web, and notably found: http://www.mail-archive.com/[email protected]/msg01747.html as well as http://git.661346.n2.nabble.com/Out-of-memory-error-during-git-push-td5443705.html but these don't seem to help me for two reasons: 1) I am not actually out of memory when I push. When I run 'top' during the push, I get: 24262 git 18 0 16204 6084 1096 S 2 1.2 0:00.12 git-unpack-obje Also, during the push if I run /head/meminfo, I get: MemTotal: 524288 kB MemFree: 289408 kB Buffers: 0 kB Cached: 0 kB SwapCached: 0 kB Active: 0 kB Inactive: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 524288 kB So, it seems that I have enough memory free, but it's actually still failing, and I'm not enough of a git guru to figure out what is happening. I would appreciate it if someone could give me a hand here and tell me what could be causing this problem, and what I can do to solve it. Thanks! EDIT: The output of running the ulimit -a command: scottj@dagobah:~$ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 204800 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 204800 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

    Read the article

  • Win 7 dual monitor: Don't move application windows when turn off second monitor

    - by codewaggle
    The title is correct, it should say "Don't" not "Doesn't". I Don't want the application windows to be moved to the main monitor when I turn off the monitors. On my Win XP dual monitor system, I can turn off the monitors and when I turn them back on, the application windows are in the same locations on the same monitors as when I turned the monitors off. On the Win 7 system, every time I turn off the monitors (or just the second monitor), all of the application windows are moved to the "main" monitor. After experimenting with the settings, I've found one process that enables me to turn off the monitors and still keep my application windows laid out in my chosen locations on the two monitors: 1) Switch the display setting to a single monitor. 2) Turn off the monitors. 3) Turn on the monitors. 4) Switch the display setting back to "Extend these Displays". After step 4, the application windows that I had laid out on the second monitor are moved back to their original locations on the second monitor. Is there a windows or nVidia setting that would leave the application windows on the second monitor so that I don't need to switch the display settings every time I turn off the monitors? Specs: Windows 7 64-bit dual monitors (1 DP, 1 DVI) Desktop (most questions seem to be about laptops) nVidia Quadro 2000 nVidia Control Panel nVidia nView Control Panel

    Read the article

  • Painfully slow login to AD bound Mac OS X Leopard machine when off home network

    - by GeeBee
    Dear all Just looking for a little help with this problem that seems to trip a lot of people up and is causing me no end of grief. I have a number of fully patched OS X Leopard machines that are bound to my AD (Server 2003). When on the home network, logging in seems swift and works as expected. When users take the machines off site, login can take 5 minutes or more. The user adds correct credentials but the desktop does not appear for a very long time. Outside the office, I have tried logging in using a local Admin account, switching off Airport and then logging in using an AD account. In this situation login is immediate again. It all seems as if Leopard is finding a suitable wireless network, spending far too long looking for the Domain before eventually giving up and using the cached credentials instead. I have read that disabling Bonjour on the machine will stop this problem (i have not yet tested) http://www.macwindows.com/leopardAD.html#111607z ...but I am reluctant to use this "Solution" as I would like to be able to use Bonjour on the local network as well as having AD-bound machines. However, is disabling Bonjour really the only answer? Is there not some time-out setting somewhere that could be amended to stop Leopard spending forever looking for home? Any help would be very gratefully received Thanks Gordon

    Read the article

  • Apache is spawning more and more processes!!

    - by erotsppa
    We have a LAMP setup that is working prety good for half a year. All of a sudden today the apache server (mysql servers are not on this box) started to die. It seems to have started to spawn more and more processes over time. Eventually it will consume all the memory and the server would just die. We are using prefork. In the mean time what we are doing is just added more ram and increased the MaxClients and ServerLimit parameter to 512. We're just prolonging the crash. The number still goes up slowly. Maybe in a day, it would reach that limit. What is going on? We only have around 15-20 request per second. We have 1Gb memory and it's not half used, there's no swapping going on. Why is apache creating more and more processes? It's almost like theres a leak somewhere! The database boxes are fine, they are not causing a delay to requests. We tested some queries everything is quick!

    Read the article

  • Building a PC, advice on SSD/Hybrid Hard Drives

    - by Jamie Hartnoll
    I am looking at building a new PC, it's mainly for office (graphics heavy) use and programming. Looking for good performance with opening and closing programs and files as well as a fast boot. I plan to have 3 primary hard drives Windows 7 Programs (photoshop etc) Current Files (There'll also be a large storage capacity back up drive, but this will be the Seagate drive I already have.) So, my question is, looking at standard "old fashioned" hard drives and SSD drives, obviously there's a massive price difference. I have been looking at drives like this: http://www.ebuyer.com/268693-corsair-120gb-force-3-ssd-cssd-f120gb3-bk-cssd-f120gb3-bk and this: http://www.ebuyer.com/321969-momentus-xt-750gb-sata-2-5in-7200rpm-hybrid-8gb-ssd-in-st750lx003 Having no experience of using either I don't know what's the most efficient thing to go for. Clearly the SSD will have better performance, but: If, for example, I had an SSD for Windows (say about 100gB), that would clearly give me the boot speed I want, then I guess my real questions are: If I were to buy one more SSD, would it give the greatest improvement on standard performance if used to store programs, or currently used files? Given that the OS is on an SSD, should I not bother with the 3 drives and instead, partition that Hybrid drive to store programs and currently used files on it? Obviously, option two is cheaper and option one could cause me storage issues, but that's when I can dump files I am not currently using onto another drive. Any, I am open to suggestions... so what do you suggest?!

    Read the article

  • How to forceably unmount stuck network share in Mac OS X?

    - by Kyle Lowry
    Not long ago my Xserve failed (power loss) while an iMac was working with files on a particular network share (called "Work Share"). This volume, "Work Share", is now stuck. It can't be seen in the GUI, you can only detect it using the Terminal. Even after power cycling over the course of several days, ls -a still shows that it's there, but I can't unmount it using any command - not even as root in single user mode. Every time I attempt to unmount that volume, I get the message that the resource is busy (which it can't possibly be since nothing is using it), and error code 4915. The issue is that when I mount the real "Work Share", it internally is renamed to "Work Share-1", which breaks all my links, and several files in the share. If I can't unmount the false "Work Share", then that computer would be unuseable without a reformat, I would imagine - and I don't want it to have to come to that. I've tried everything I can think of - it looks like sudo can't save me now. Any ideas on how to unmount this stuck volume?

    Read the article

  • Database problem with MS JET

    - by Zimmy-DUB-Zongy-Zong-DUBBY
    I am migrating a bunch of sites which each use an Access database (or whatever an MDB file is). If I try to load the site, I get the following error: Microsoft OLE DB Provider for SQL Server error '80004005' [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied If I rename the MDB file, I get a complaint that the file does not exist, which makes sense. If the file is named correctly, the site tries to load for about 30 seconds or so, and then just fails with the above message. During this waiting period, I can see a lock file being created (and then at some point removed). The MDB file and it's parent dir have full permissions granted to all users. Given that the lock file is successfully created and removed, I don't think that this is a "real" permission issue. The OS is Windows Server 2003 SP2. I am not sure about much more detail on it's config wrt Access databases. I also don't know what version it is expected to be. VB code in question: set oConn=server.createobject("adodb.connection") DSNtemp="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=D:\fullPathGoesHere\db\sitedb.mdb" oConn.Open DSNtemp

    Read the article

  • Windows 7 - User profile corrupted on standby/hibernate

    - by Dogbert
    I have a friend who uses Windows 7 for her home PC. She has a RAID1 array that is using up-to-date Intel Matrix storage drivers, and the entire array is backed up to a separate internal SATA HDD via Acronis True Image every night. Over the weekends, she lets her machine go into suspend after 4 hours of inactivity, and then later into hibernation after 6 hours of inactivity. Her Acronis backup system does nightly incremental backups, and full backups every Saturday night. She also has AVG Free Antivirus installed which does full scans every Monday. So far, on two occasions, on Sunday morning, her user profile is corrupt. I couldn't find any solution that allowed me to repair her profile, so I end up having to (as suggested by MS Knowledge Base, http://windows.microsoft.com/en-us/windows7/fix-a-corrupted-user-profile ;, Yep, no solution to fixing it, just clobber the whole thing) recreating her profile, then copying over data, recreating her Outlook profile, reconfiguring all third-party applications, etc. It's a real nightmare, and takes 4 hours to do each time. Are there any suggestions on how to resolve this profile corruption? This was happening even before the RAID/Acronis solution was in place, but I thought I'd provide as much information as possible.

    Read the article

  • windows 7: Event 55 The file system structure on the disk is corrupt and unusable

    - by Radio
    Here is a real bad one! Windows 7 RTM with SP1 installed [Version 6.1.7601]. Recently tried to delete some folder on my hard drive and Windows prompted "Error 0x80070570: The file or directory is corrupted and unreadable", and at the same time placed an Event 55 describing "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on \Device\HarddiskVolume2." Ran chkdsk, first with /f option, then with /r option. Result in both cases was: no errors found, 0 bad sectors. No problems chkdsk found at all! Went through StackExchange, Google and spent over 6 hours on this. Still cannot figure out the problem. Re-installing/Re-Formatting is not an option! What did I try: Hotfix - Windows6.1-KB982927-x64.msu - gave me an error about incompatibility with my computer, however it totally matches my system. CRC of hotfix was ok. Windows Repair Console found startup errors and fixed those, but this didn't help an issue, even by running chkdsk c: /R from it. http://support.microsoft.com/kb/246026 does not promise anything good. sfc /scannow does not help too. Replaced hard drive by cloning an old one using True Image, repeated all steps above. At the same time, some minor glitches started to appear in my Windows, like side panel and notification area settings are getting reset. Goal is to delete the folder and get rid of Event 55. Sounds like NTFS bug. Please help. This is completely ridiculous.

    Read the article

  • How to backup a NAS drive to a USB drive?

    - by Tim Murphy
    How would you backup 600+ GB of data on a NAS (Network-Attached Storage) drive to a USB external drive? The NAS drive does not contain mission critical data nonetheless I wish to make weekly copies of it just in case. The NAS drive is almost exclusively used as an archive dump and is rarely updated. However the backup strategy used must have a simple restore procedure so I can confidently say the data now on the NAS drive is exactly how it was at the time of backup. I did try xcopy but seemed like it would take many-many hours and eventually crashed with insufficient memory. http://www.ctunion.com/node/114 suggests I would need to use xxcopy instead due to folder/file name lengths. My concern with xcopy/xxcopy is the length of time it takes. Hoping something else is faster. NAS drive is DLink DNS-313. 1TB drive installed. Connected to router via Ethernet cable. USB drive is Seagate 1TB. Can be connected to Windows Vista (preferred) or Windows 7 PCs. Both PCs are usually connected Wirelessly however ethernet cable can be used during backup to speed up the process.

    Read the article

  • What parts of a motherboard age, and how can I choose one with the longest possible life?

    - by Robert Harvey
    I have a home-built computer that's probably about four years old. I realize this probably seems ancient to some folks, but computers have no moving parts (except the fans), so theoretically they should last a long time, if I still have software to run on them. A few weeks ago, it began blue-screening and freezing up, with various error messages. It almost always happened about five minutes after startup. I assumed that the video card was overheating, since the cheap little fan on the heatsink died, so I replaced it. Long story short, after upgrading the video drivers a couple of times and performing some other troubleshooting, I remembered that the last time this happened, I took out the memory SIMS and cleaned the contacts with a gum eraser, so I did that again (noting that the SATA cables were very close to the chips on the SIMS). I re-routed the cables and reinstalled the SIMS. So far, so good; the machine has been trouble-free since. But blue-screens are distressing; I never know what bits are being chewed up in my OS installation when something like this happens. So I'm wondering if I'm choosing my components properly. If it matters, it's an Intel D915GAG motherboard and Corsair memory, but what I'm wondering is, should I be looking for certain characteristics when I choose these parts for my next computer, so that I can avoid this problem in my next build?

    Read the article

< Previous Page | 930 931 932 933 934 935 936 937 938 939 940 941  | Next Page >