Search Results

Search found 28590 results on 1144 pages for 'best'.

Page 937/1144 | < Previous Page | 933 934 935 936 937 938 939 940 941 942 943 944  | Next Page >

• Tracking Security Vulnerability remediation

  - by Zypher

  I've been looking into this for a little while, but havn't really found anything suitable. What I am looking for is a system to track security vulnerability remdiation status. Something like "bugzilla for IT" What I am looking for is something pretty simple that allows the following: batch entry of new vulnerabilities that need to be remediated Per user assignment AD/LDAP Authentiation Simple interface to track progress - research, change control status, remediated, etc. Historical search ability Ability to divide by division Ability to store proof of resolution for the Security Team to access Dependency tracking Linux based is best (that's my group :) ) Free is good, but cost doesn't matter so much if the system is worth it The systems doesn't have to have all of these features, but if it did that would be great. yes we could use our helpdesk software, but that has a bunch of pitfalls such as triggering SLA alerts and penalties as well as not easily searchable outside of a group. Most of what I have found are bug tracking systems that are geared towards developers, and are honstely way overkill for what I am looking for. Server Faults input is greatly appreciated as always!

  Read the article

• Referencing groups/classes from Puppet dashboard in my site manifest

  - by Banjer

  I'm using Puppet Dashboard as my ENC and I'm not sure how to reference or use class and group classifications from /etc/puppet/manifests/site.pp. I have two groups defined in the dashboard: CentOS6 and SLES11. What should my site.pp look like if I want to include a certain list of modules in the CentOS6 group and a certain list of modules in the SLES11 group? I'm trying to do something like this: # /etc/puppet/manifests/site.pp node basenode { include hosts include ssh::server include ssh::client include authentication include sudo include syslog include mail } node 'CentOS6' inherits basenode { include profile } node 'SLES11' inherits basenode { include usrmounts } I have OS-specific case statements within my modules, but there are some modules that will only be applied to a certain distro. So I suppose I have two questions: Is this the best way to apply modules/resources in an OS-specific manner? Or does the above make you want to vomit? Regardless of #1, I'm still curious as how to reference classes, groups, and nodes from Dashboard within my manifests. I've read the External Nodes doc, but I'm not seeing how they correspond to manifests. Thanks all.

  Read the article

• TV-out worked, now doesn't. May the problem be the cable, TV, driver, OS, graphic card?

  - by Petruza

  I have a CRT TV hooked to the PC, which once worked great, now doesn't. I can't consider getting a newer TV, this one is used in an MAME arcade cabinet so it has to be a CRT for best old school look and feel. It's connected through the TV-out connector of my graphic card. When it worked, I had Windows XP, the same PC and the same card. Now I have windows 7, not sure if the OS switch caused the malfunction as I don't use the TV-out all the time. Can it be an upgrade of the Nvidia driver? I thought it may be the S-video to RCA cable, but tried 3 different cables and neither worked. In fact, one of them, that unlike the other two, has a single RCA output connector instead of two, behaves differently, although it doesn't work, but it does the following: When I open the NVidia settings panel, or when I change a setting and click Apply then the TV flashes for a split second and you can see the windows screen, but then it goes back to blank. So any clues what can be failing here, and some advice? Possible failures, please comment on the one you suspect the most: NVidia driver version Windows version Cable Graphic card's TV out other?

  Read the article

• What should I be doing while I wait for a progress bar?

  - by Malnizzle

  So I am sitting here waiting for a progress bar to run (20 mins or so), and was wondering how best to use my time as a SysAdmin. I debated not posting this question briefly, as this could get flagged as subjective, but I think it's an important question, and a question that can be legitimately answered (per the FAQ) I know this something a lot of sys admins deal with, especially if they are client-based I would venture to guess. There is a lot of material out there about how to multi task, but SysAdmin work is unique in this area as well. I could switch over to another project, but I could get wrapped up in that, and forget about the original project I was working on, and that's hard if you are billing a client for your time, both for tracking your time, as well as being fair to that client. I could check ServerFault, but that isn't directly work related, I could sort my email, so on and so forth. What do you do, or what should I do when I have time waiting for a progress bar? Thanks! (download done, back to work!)

  Read the article

• Suggestions for Windows 8 migration [closed]

  - by Big Endian

  I'm thinking of migrating to Windows 8. At first I hated it, but I'm pretty sure the Windows 8 model is the future, and I don't particularly want to end up hating the future like my parents, frustrated and bewildered by anything past Windows XP. I'm currently running Windows 7 and my system has been accumulating some problems. It's probably an accumulation of issues from installing too much software, changing firewall settings, installing Ubuntu alongside Windows, and... well I'm not sure, but my computer has been buggy in unexpected ways lately (freezing and unfreezing, display driver crashing and recovering, and what I call "deep freeze/thaw cycle" where the mouse won't even move for a while). I'm good at solving computer problems, but I can't seem to get to the root of these and my best idea for fixing them is making sure I've backed up every file then re-installing the entire OS. Luckily for me, a new OS is just around the corner so this would be a good time to get two things out of the way at once. The problem I see is that the upgrade options I see are all "seamless". I don't want a seamless upgrade. I want to wipe the slate clean and start all over. Does this mean I will have to buy a full, new copy of Windows 8 rather than one of the cheaper upgrading options? Or does it not make since for me to go to Windows 8 given that I have a laptop, not a tablet? Maybe I should just re-install Windows 7, or even call good enough good enough, try to eliminate the bugs, and start with a fresh slate in 2-3 years after this computer eventually dies entirely from (inevitable) hardware failure. What would be the advantages or disadvantages and costs of each option, how would I go about upgrading to Windows 8 if that's the option I choose, and what is your personal opinion about my situation?

  Read the article

• Migrating email forwarding entries from DirectAdmin to Google App (Free edition)

  - by bobo

  I have a website hosted in a shared hosting account and it contains a DirectAdmin (DA) control panel. From there, I can see some email forwarding entries. I would like to migrate the email server to the Google App's, I am going to change the MX records to point to Google email server in the DA. For the existing email accounts that I see in the DA, I will re-create them in the Google App. But for those email forwarding entries, I am confused. If I keep them there, will they still work after I have changed the MX record pointing to the Google email server? If not, this means I will need to re-create them in the Google App, right? Unfortunately, Google App (Free edition) does not seem to allow email forwarding like those in DA. Unless I choose to use other editons (http://www.google.com/support/a/bin/answer.py?answer=175745). In DA, when I have created an email forwarding entry such as [email protected] - [email protected], I do not really need to create a dummy [email protected] email account and DA will still do the forwarding properly. The best I can do now, without upgrading the Google App edition, is to simply create dummy email accounts in the Google App and setup forwarding inside that email account, is this correct?

  Read the article

• What's the state of the art in image upscaling?

  - by monov

  I like to collect cool pics and use them as wallpapers or for other things. Often, artists publish only low-res versions, probably for fear of theft. Example: Gabriel Pulecio's BIRDS Now, if I want to use that as a wallpaper, I'd have to upscale it, and obviously that'd make it look blurry because of the bicubic interpolation. I realize there's no real way to get a high-res version from a low-res pic, because the information is not simply there. That said, I'm wondering if heuristics have been developed for upscaling with less apparent loss of quality. Those would probably be optimized for specific image types. For photorealistic pictures, for cartoons with large flat areas, for pixel art... One algorithm I'm aware of is Seam Carving. It works for some kinds of pics, especially ones with a plain, undetailed or uninteresting background, and a subject that strongly stands out. But it's far from being general-purpose. Applying it to the above pic produces this. It looks quite sharp, but the proportions are horribly distorted because the algorithm is not designed for this kind of pic. Another is Pixel art scaling algorithms. Those are completely unfit for anything other than actual pixel art that's pixelized to begin with. For example, I tried the scale2x windows binary on my pic, but its output was nearly indistinguishable from nearest-neighbour scaling because the algorithm didn't detect any isolated pixely fragments to work from. Something else I tried was: I enlarged the image in Photoshop with bicubic interpolation, then I applied unsharp mask. The result looks pretty bad. The red blotch is actually resized reasonably well, but the dove is far from it. What I'm looking for is some app that makes a best-effort attempt at upscaling any input image while minimizing blurriness. If you know of any, I'll be thankful. Note that the subjective prettiness and sharpness of the result is what matters... the result doesn't need to be completely faithful to the original small image.

  Read the article

• Question about domain name registration

  - by Obay

  I received the following email from a certain [email protected] YYY is a company name ZZZ is OUR company name Dear Manager, We are a professional intellectual property rights consultant organization, mainly deal with the global domain name registration and internet intellectual property rights protection. On March. 24th, 2010, we formally received an application from YYY, they applied to register the internet brand “ZZZ” and some relevant domain names with our organization. During our preliminary investigation, we found that these domain names' keyword is fully identical with your trademark. Therefore, we need to confirm with you, whether you consigned YYY to register these domain names with us or not? Or, is YYY your business partner or distributor? If you have no relationship with this company, we assume that they have other purposes to obtain these domain names. Currently, we have already suspended this company's application temporarily due to the seriousness of this isuue. In order to avoid the vicious domain name grabbing, please let the relevant person make a confirmation with me via telephone or email as soon as possible. Thank you for your support to our work! Best Regards XXX Tel: xxxxx-xxxx xxxx Fax: xxxxx-xxxx xxxx Email: [email protected] www.world-wtc.cn This seems legit, or is it? By the way, XXX is just a first name, not a complete name.

  Read the article

• Disable IPv6 on Debian VPS (Virtuozzo!)

  - by chris_l

  I have a Debian Lenny VPS, that's running virtualized by Parallels/Virtuozzo. Currently, the network interface doesn't have an IPv6 address - and that's good, because I don't have an ip6tables configuration. But I assume, that I could wake up one day, and ifconfig will show me an ipv6 address for the interface - because I have no control over the kernel or its modules - they're under the control of the hosting company. That would leave the server completely vulnerable to attacks from IPv6 addresses. What would be the best way to disable IPv6 (for the interface or maybe for the entire host)? Usually I would simply disable the kernel module, but that's not possible in this case. Update Maybe I should add, that I can use iptables and everything normally (I'm root on the VPS), but I can't make changes to the kernel or load kernel modules because of the way Virtuozzo works (shared kernel). lsmod always returns nothing. I can't call ip6tables -L (it says that I need to insmod, or that the kernel would have to be upgraded). I don't think, that changes to /etc/modprobe.d/aliases would have any effect, or do they? Networking Config? I thought, that maybe I can turn IPv6 off from /etc/network/... Is that possible? I just see, that they've set up avahi, so I should probably change the setting use-ipv6=yes to "no" in /etc/avahi/avahi.conf (?) Has anybody already tried this solution, and can I rely on it? I don't know too much about avahi. Would it actually have any effect? Or could it even bring my entire interface down, once IPv6 is enabled by the kernel?

  Read the article

• New Dvds with 99 Title tracks, which one is the correct track?

  - by Mike Fielden

  I have embarked on the task of backing up my DVD collection. I have noticed that some of the newer movies I am attempting to rip contain 99 Title tracks all with approximately equal overall run times. I use MacTheRipper to rip the DVDs and Handbrake to encode them. My question is, is there a site somewhere that has information regarding which Title track to select? Disclaimer: I cannot stress this enough, I legally own these DVDs. I am merely making a digital copy. Two examples of such DVDs are Star Trek and Carriers. UPDATE: Just an FYI each most of these 99 tracks appear to be the full length tracks. There times look to be very similar to the overall movie run time (within a few seconds of each other). So using the time isn't a valid way to tell which is the correct track. Opening the movie with VLC seems to be the best way to tell. Thank you all.

  Read the article

• How to configure SCSI hard drives and RAID for Poweredge 2850 web server

  - by Saul

  I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

  Read the article

• Font for Wine that supports the entire character set of the Win32 Console?

  - by Brian Campbell

  I would like to be able to display in the Wine console all characters that the Win32 console can display. I've written a small test program to print out all 8-bit characters: #include <stdio.h> int main(int argc, char *argv[]) { int i, j; for (i = 0; i <= 0xF0; i+=0x10) { for (j = i; j <= i + 0x0F; ++j) printf("%2x:%c", j, (char)j); printf("\n"); } getchar(); return 0; } Under Wine, the best I can do so far is using Andale Mono: While this is what I see on Windows Server 2008: Is there anywhere I can legally download a font that will allow me to view all of those characters under Wine? edit I've found a set of DOS fonts that includes a CP437 font, which should cover the character set I'm interested in. However, even if I install this font, wineconsole doesn't seem to recognize it. Is there any way I can get wineconsole to use this font, or convert this font to a format that wineconsole can use? Or is there any way I can extract fonts from DOSEMU for use in Wine? Oh, and I should probably mention that I'm on Mac OS X 10.6.2, installing Wine via MacPorts, using the wine-devel package. more information I have tried installing some console fonts that should cover the full character set as Mac OS X fonts (such as the NewDOS font listed above, and a font I tried converting from the fonts supplied by DOSEMU). Wine does not seem to pick up on new fonts installed in Mac OS X. Is there a way to register new fonts I've installed with Wine? Would manually editing the system.reg file that seems to contain font mappings work, or is there something else I'd need to do? bump Bounty ends soon, I'm still looking for an answer for this. Does anyone use the Wine console for complex text user interfaces?

  Read the article

• Robocopy silently missing files

  - by John Hunt

  I'm using Robocopy to sync data from our server's hard disk to an external disk as a backup. It's a pretty simple solution but pretty much the best/easiest one we could come up with - we use two external disks and rotate them offsite. Anyway, here's the script (with the comments taken out) that I'm using to do it. It works very well, it's quick and almost 100% complete - however it's acting pretty strange with a few files (note company name has been changed in paths to protect the innocent): @ECHO OFF set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% SET prefix="E:\backup_log-" SET source_dir="M:\Company Names Data\Working Folder\_ADMIN_BACKUP_FILES\COMPA AANY Business Folder_Backup_040407\COMPANY_sales order register\BACKUP CLIENT FOLDERS & CURRENT JOBS pre 270404\CLIENT SALES ORDER REGISTER" SET dest_dir="E:\dest" SET log_fname=%prefix%%date:~-4,4%%date:~-10,2%%date:~-7,2%.log SET what_to_copy=/COPY:DAT /MIR SET options=/R:0 /W:0 /LOG+:%log_fname% /NFL /NDL ROBOCOPY %source_dir% %dest_dir% %what_to_copy% %options% set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% cscript msg.vbs "Backup completed at %DATESTAMP% - Logs can be found on the E: drive." :END Normally the source would just be M:\Comapany name data\ but I altered the script a bit to test the problem. The following files in the source are not copied to the dest: Someclient\SONICP~1.DOC Someclient\SONICP~2.DOC Someclient\SONICP~3.DOC However, files in the same directory named: TIMESH~1.XLS TIMESH~2.XLS are copied. I'm able to open the files that aren't copied with no trouble at all, and they certainly weren't opened when I ran robocopy so it's not a locking issue. Robocopy is running as administrator so it's not a permissions issue. There's no trace these files were even attempted to be copied as there are no errors being output in the log or in my command prompt. Does anyone have any suggestions as to what this might be? Busted hard disk? Cheers, John.

  Read the article

• Recovering Data from a Linkstation LS-WXL/R1

  - by kingkool68

  I've been running a Buffalo Linkstation LS-WXL/R1 in RAID1 for a few weeks. Two nights ago we had a brief power outage. Yesterday when I tried to mount the disk it couldn't be found. I logged in to the web admin and it couldn't see any storage attached and no arrays available. Well this sucks. I ended up taking the disks out and mounting them to an Ubuntu virtual machine. They how up as an Array but I can't start the Array to the best of my limited knowledge. I could still see the 6 partitions, so I'm confident the data is there. I can use Photorec (http://www.cgsecurity.org/wiki/PhotoRec) to recover most of the files I want, it just takes some time. Could I make an image of the data partition and mount that in Ubuntu so I can get at the data I want through the file system? 95% of the data on my Linkstation LS-WXL/R1 is backup. I just put a few folders of images on there that I need to get back. I'm already preparing to format the disks when I'm done and re-building the RAID1 array from scratch. Any advice would be appreciated.

  Read the article

• Install IIS on Server 2003 unattended via PowerShell as a service user (no terminal session)

  - by maik

  I've been racking my brain with this for a bit and figured I would ask here to see if anyone could enlighten me. As the title says, I'm trying to install the IIS role on Server 2003 using an unattended install method launched via a service. We're using RightScale and most of what we want to accomplish is pretty straightforward. I created an unattend file for use with sysocmgr.exe: [Components] iis_common = ON iis_www = ON iis_www_vdir_scripts = ON iis_inetmgr = ON fp_extensions = ON iis_ftp = ON And I invoke it like so: sysocmgr.exe /i:%windir%\inf\sysoc.inf /u:C:\path\to\iis-unattend.txt /r /x /q If I run that from a command prompt while logged in as Administrator it works just fine, but if it runs via RightScript (the RightScale user on the server, which is a local admin) it fails somewhere in the middle and the logs I get are rather unhelpful. The thing is I can do this same thing with the SNMP Client (which is a Windows component, not a server role) and it works with no problems while run via the script service user. My best guess is that sysocmgr.exe is expecting a GUI element to be there during the role installation and since the service user has no terminal session it coughs and dies. That's just a wild stab in the dark.

  Read the article

• Wireless Activity Monitoring for PCI DSS Compliance

  - by dkusleika

  In an effort to be PCI DSS compliant, I took a trustkeeper.net questionnaire. I failed the question that asks Is the presence of wireless access points tested for by using a wireless analyzer at least quarterly or by deploying a wireless IDS/IPS to identify all wireless devices in use? (SAQ #11.1) My only wireless access point is outside my firewall, so even if you cracked my wireless you couldn't get inside my domain (unless you crack that too). My firewall doesn't have IPS and I couldn't tell if it had IDS. I looked around for a wireless analyzer, but what I found was $500, which is a little pricey for my size business. And even if I got it, I'm not sure I would understand what it tells me. Surely there are smaller/less sophisticated businesses that take credit cards and have solved this. My questions are: What are the risks if someone were to crack my wireless? (Could they read all internet traffic? Just wireless traffic? Just use my internet connection?) And what is the best/cheapest way to test my connection point quarterly? Should I buy the $500 analyzer? Domain is Windows Server 2000. Firewall is Sonicwall Pro 2040. Router is 8 port D-link.

  Read the article

• EEE PC dropbox server running 24/7

  - by microspino

  I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have Samsung SCX 4521F (fax/print/scan/copy), Samsung ML2010, HP Laser jet P1006, HP Color Laserjet CP1215, HP Office jet pro K8600, HP Design jet 500. All of them now are connected using little print servers and I want to get rid of them hooking everything to this mini server. The fax/print/scan/copy machine need to stay connected to a PC to make me able to use the software that comes with It. The mini server would save me on this too. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: If You have something similar running for a long time If You disagree with this hardware choice and If You would suggest some other device. If You see any issues with my printing setup Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

  Read the article

• Do registry issues with Win7 persist through a recovery from a system image?

  - by user59089

  So I need a bit of advice, please; here's my situation: I have 1) a system image on an a brand new external 1 TB SATA drive, that I managed to successfully capture before my 2) primary system drive went down. I realize this is a fairly simple matter of buying a new primary drive and performing the recovery to the fresh disk...however, the issue is that I believe Win7 was also having some significant issues of its own--basically, Update unable to install updates, and Backup continually ditching the auto backup schedule. I'd been trying to address those issues when my system was still working, but it's been so fruitless, I'm convinced a Win7 re-install would be best, and now I'm concerned that if I was in fact having what I believe are likely registry-related issues before, that these will persist through a recovery--would that likely be correct? I'm mainly worried about recovering my files, so if I did a full recovery from the image, should I be able to then access my individual files, and copy them manually to an external drive, so I can then do a full re-install of Win7? Sory if this seems obvious, but I've never done a recovery before and just trying to make sure there's no red flags with what I have in mind...

  Read the article

• Unix Permissions: Enable access to files no matter the user?

  - by TK Kocheran

  I've been using Linux for a long time and I still am completely in the dark about how file permissions really work. With that in mind, does anyone have any books or thorough guides I could read to really understand things completely? I've done my fair share of sysadminning, so I know the easy stuff like making directories readable and writable, making files executable, and changing the owner of a file, but on sharing files across users, I'm lost. Here's my main problem. I have a number of machines across which I intend to synchronize my music library. I've been using Unison for a while now and it's a great choice as I can easily run it over SSH on my local network which I just set up. Win-win. Up until this point, I've been synchronizing computers using a 2TB external hard drive. (computer 1 unisons to HD, computer 2 unisons to HD, etc.) This is tedious at best, especially since I encrypted the drive, making it a huge hassle to hook it up to all of my machines and sync it. Anyway, the drive is running ext4 (in TrueCrypt), so it maintains all Unix filesystem info like owners and groups. I just set up a new machine and just Unison'd it to get the music on it, and I realized that now, all of my permissions are fubar. I had to run Unison as root since that was the only way I could get the files to come off of the external drive. Apparently, since I'm using a different user name on this machine than my usual "rfkrocktk" across all machines, this essentially throws a huge wrench in the gears. Here's my use case. This laptop has two effective users, "leandra" and "rfkrocktk". I want to share music between these two users, so I symlinked /home/rfkrocktk/Music to point to /home/leandra/Music. How do I (a) allow both users access to read/write/delete files in this folder, and (b) keep everything nicely in sync without messing up file ownership?

  Read the article

• Updating a backup image (.wim and/or Acronis .tib)

  - by Backdraft

  Anyways, I've got a Windows 7 installation that I want to make a generalized backup image of so I can use it for future installs on not only my desktop from which the image is to be derived from, but also other systems with dissimilar hardware. Therefore I've arrived at either 2 options, using either sysprep/imagx from WAIK (guide here), or the simpler Acronis True Image w/ their Universal Restore addon. Of course, they create distinct image file types, .wim and .tib respectively. What I'd like to do is to periodically update this image, say with Windows Updates, by booting it to either a physical partition or using virtualization (VirtualBox/VMWare), perform the updates, and save the updated .wim or .tib image file again. What's the simplest way I could do this? Another question is, I created this generalized backup image on a 500GB Seagate 7200RPM HDD. Say I get an SSD as an OS drive in the future, can I just deploy this backup image to the SSD normally, or are there any potential problems to be aware/avoid (ie. is it best to completely reinstall the OS on the SSD from scratch, or can I use the image created on the normal HDD with no issue)? Thanks and Happy Holidays.

  Read the article

• How to deal with the extremely big *.ost files in a Terminal Server environment which is running out of space

  - by Wolfgang Kuehne

  Our Terminal Server is running out of hard disk space, and the major files which occupy most of the space are *.ost files of the Outook, which come form the users which use the Terminal Server all the time through remote desktop. The Outlook is installed on the Terminal Server and various users can use it. What would be a solution in this case. Is there a way to limit the size of the *.ost files? I read in forums that having the Outlook 2010 set up in Cached Exchange Mode isn't the best practice for an environment where the hdd space is a major constraint. First thing that came to my mind is using folder redirection, and place the ost files (together with the AppData forlder) in a network share, but this does not help, because the ost files are saved a part of the AppData folder which can not be redirected. Then I thought if it is possible to limit the size of the ost file? Or limit the time that it keeps emailed cached, say just emails from the last 6 months are sufficient. Another solutions that came to my mind, moving the ost files somewhere else, this required the old ost file to be removed, and creation of a new one. I am not quite sure if the new OST file will still have cached the emails which where available in the old ost, or will it start caching from where the other one left. What do you suggest?

  Read the article

• linux hardware raid 10 / lvm / virtual machine partition alignment and filesystem optimization

  - by Jason Ward

  I've been reading everything I can find about partition alignment and filesystem optimization (ext4 and xfs) but still don't know enough to be confident in setting up my current configuration. My remaining confusion comes from the LVM layer and if I should use raid parameters on the filesystem in guest os'es. My main questions are: When I use 'pvcreate --dataalignment' do I use the stripe-width as calculated for a filesystem on RAID (128kB for ext4 in my situation), the Stripe size of the RAID set (256kB), something else altogether, or do I not need this? When I create ext2/3/4 or xfs filesystems in guests on the Logical Volumes, should I add the settings for the underlying RAID (e.g. mkfs.ext4 -b 4096 -E stride=64,stripe-width=128)? Does anyone see any glaring errors in my set up below? I'm running some benchmarks now but haven't done enough to start comparing results. I have four drives in RAID 10 on a 3ware 9750-4i controller (more details on the settings below) giving me a 6.0TB device at /dev/sda. Here is my partition table: Model: LSI 9750-4i DISK (scsi) Disk /dev/sda: 5722024MiB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1.00MiB 257MiB 256MiB ext4 BOOTPART boot 2 257MiB 4353MiB 4096MiB linux-swap(v1) 3 4353MiB 266497MiB 262144MiB ext4 4 266497MiB 4460801MiB 4194304MiB Partition 1 is to be the /boot partition for my xen host. Partition 2 is swap. Partition 3 is to be the root (/) for my xen host. Partition 4 is to be (the only) physical volume to be used by LVM (for those who are counting, I left about 1.2TB unallocated for now) For my Xen guests, I usually create a Logical Volume of the needed size and present it to the guests for them to partition as needed. I know there are other ways of handling that but this method works best for my situation. Here's the hardware of interest on my CentOS 6.3 Xen Host: 4x Seagate Barracuda 3TB ST3000DM001 Drives (sector size: 512 logical/4096 physical) 3ware 9750-4i w/BBU (sector size reported: 512 logical/512 physical) All four drives make up a RAID 10 array. Stripe: 256kB Write Cache enabled Read Cache: intelligent StoreSave: Balance Thanks!

  Read the article

• How do I stop mail.app and its nag screen from opening upon login in OS X if I don't use it

  - by user26453

  Currently whenever I start OS X (10.6.2), mail.app starts up with a "Welcome to Mail" dialog, asking me to create an account by inputting name, email address, and password. If I cancel this dialog, the app just hangs and I have to force quit it. I do not use the mail.app and I do not want it to start up with OS X. I have checked the login items and it is NOT present in the login items list for my account. I have also ctrl+clicked the doc icon that appears and confirmed there is no option enabled for "Run at Login". If I go ahead and just spam continue through the dialogs for a new account, I can get through to actually using Mail and accessing preferences. I cannot find a startup option in Mail preferences. After I have completed this, if I now restart, Mail does NOT open automatically. However as soon as I delete the account that I created, it once again goes back to popping up a "Welcome to Mail" dialog every time I startup and login. As best as I can tell, it seems OS X checks if an account exists in the Mail app, and if it does not, it will always start up a "Welcome to Mail" dialog on login, regardless if the Mail app is set to run via login items, etc. This is incredibly frustrating given I have no intention of using the Mail app. I realize I can easily leave account info in there (perhaps even disable the account via preferences), but this behavior is ridiculous. ajgs

  Read the article

• Can I replicate data between mySQL and SQL Server/SQL Azure?

  - by Ernest Mueller

  I have a replicated mySQL setup running happily on Amazon AWS, making user data available locally in various regions. Now I'm faced with an app that needs to go up on Microsoft Azure and I need to replicate the data over to there as well. So that's annoying. I am faced with several options: Replicate from mySQL to SQL Azure/SQL Server seems like it would be lovely - is this possible? I'd consider using a third party tool and paying $$ if I had to. We're not using anything complicated in the db feature set, it's just data in tables. Get mySQL working on Microsoft Azure - which seems really dicey at best. All the HOWTOs I can find say "this is possible but you really shouldn't try this for production apps." Go non-realtime and do syncs from mySQL to SQL Azure, which may be somewhat expensive and slower. Rip out all my mySQL on Amazon and use SQL Server there, which would make Baby Jesus cry. Has anyone gotten mySQL to SQL Azure/SQL Server replication or syncing working? Or have any other approaches (a NoSQL solution that replicates and might meet our but-we-need-to-join-some-tables needs that can easily be run on Amazon and Azure)?

  Read the article

• Linux Tuning for High Traffic JBoss Server with LDAP Binds

  - by Levi Stanley

  I'm configuring a high traffic Linux server (RedHat) and running into a limit I haven't been able to track down. I need to be able to handle sustained 300 requests per second throughput using Nginx and JBoss. The point of this server is to run checks on a user's account when that user signs in. Each request goes through Nginx to JBoss (specifically Torquebox with JBoss A7 with a Sinatra app) and then makes an LDAP request to bind that user and retrieve several attributes. It is during the bind that these errors occur. I'm able to reproduce this going directly to JBoss, so that rules out Nginx at least. I get a variety of error messages, though oddly JBoss stopped writing to the log file recently. It used to report errors about creating native threads. Now I just see "java.net.SocketException: Connection reset" and "org.apache.http.conn.HttpHostConnectException: Connection to http://my.awesome.server:8080 refused" as responses in jmeter. To the best of my knowledge, I have plenty of available file handles, processes, sockets, and ports, yet the issue persists. Unfortunately, I have very little experience tuning servers. I've found a couple useful documents - Ipsysctl tutorial 1.0.4 and Linux Tuning - but those documents are a bit over my head (and just entering the the configuration described in Linux Tuning doesn't fix my issue. Here are the configuration changes I've tried (webproxy is the user that runs Nginx and JBoss): /etc/security/limits.conf webproxy soft nofile 65536 webproxy hard nofile 65536 webproxy soft nproc 65536 webproxy hard nproc 65536 root soft nofile 65536 root hard nofile 65536 root soft nproc 65536 root hard nofile 65536 First attempt /etc/sysctl.conf sysctl net.core.somaxconn = 8192 sysctl net.ipv4.ip_local_port_range = 32768 65535 sysctl net.ipv4.tcp_fin_timeout = 15 sysctl net.ipv4.tcp_keepalive_time = 1800 sysctl net.ipv4.tcp_keepalive_intvl = 35 sysctl net.ipv4.tcp_tw_recycle = 1 sysctl net.ipv4.tcp_tw_reuse = 1 Second attempt /etc/sysctl.conf net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 net.core.netdev_max_backlog = 30000 net.ipv4.tcp_congestion_control=htcp net.ipv4.tcp_mtu_probing=1 Any ideas what might be happening here? Or better yet, are there some good documentation resources designed for beginners?

  Read the article

< Previous Page | 933 934 935 936 937 938 939 940 941 942 943 944  | Next Page >