Search Results

Search found 90323 results on 3613 pages for 'user interaction'.

Page 937/3613 | < Previous Page | 933 934 935 936 937 938 939 940 941 942 943 944  | Next Page >

  • iPhone Missing Apps in some Directories

    - by paul simmons
    Hi, I was moving iPhone applications directory, and ended in a result that some applications are missing from Springboard. As far as I can see, the apps in /Applications/GUID-LIKE-DIRECTORIES are missing like Facebook; however I see they are in /Applications if I check with SSH. Any help?

    Read the article

  • Refer to the same footnote multiple times in Pages '09

    - by Zsub
    I would like to refer to the same footnote multiple times in Pages '09. What it does now, is create a new (identical except for the little number) footnote. So I have three or four identical footnotes which is a waste of space. it looks like this: These are the first1, second2 and third3 references, all numbers referring to their own (further identical) footnotes. I would like to have it like this: These are the first1, second1 and third1 references, all numbers referring to the same footnote.

    Read the article

  • Netbook without Windows?

    - by drewk
    I have been looking around for a netbook without Windows and with Ubuntu preinstalled. Almost all I have seen have Windows. The main issue is making sure that the computer ships with the right Ubuntu drivers and, hopefully, saving a little without having to pay for Windows. So far, I cannot find one.

    Read the article

  • Can any body help me for this.. please..

    - by Abid Ali
    When do i run the set up of Adobe Reader, i get this error that this installer package could not be opened. verify that the package exist and that you can access it, or contact the application vendor to verify that this is a valid windows installer package... please help me Regards Abid

    Read the article

  • Add panel to secondary monitor on Ubuntu 10.4

    - by Mr. Man
    I am running Ubuntu 10.4 Lucid Lynx and I was wondering if it is possible to put a panel on a secondary monitor. Here are methods I have tried which did not work: Click and drag the panel from the primary monitor to the secondary monitor Installing TwinView (couldn't find it) Thanks in advance!

    Read the article

  • Populating Specific Cells Using VBA

    - by Daniel
    I am using VBA to pull from a SQL table and it automatically populates cell E14. Not sure why it's that cell, but is there a way to specify which cell it pulls the data into? Here's what I have right now: strSQL = "SELECT distinct Source FROM dbo.Simulations WHERE SimulationID = 5

    Read the article

  • debconf-set-selections warnings Kubuntu 10.04

    - by Buzz
    Hi all! i'm trying to save the content of the debconf database with debconf-get-selections when i use debconf-set-selections i get some warnings warning: Unknown type terminal, skipping line 19 warning: Unknown type error, skipping line 37 warning: Unknown type error, skipping line 83 warning: Unknown type error, skipping line 85 warning: Unknown type error, skipping line 111 warning: Unknown type error, skipping line 156 warning: Unknown type detect-keyboard, skipping line 182 warning: Unknown type error, skipping line 197 warning: Unknown type error, skipping line 234 warning: Unknown type error, skipping line 251 warning: Unknown type error, skipping line 253 warning: Unknown type error, skipping line 259 warning: Unknown type error, skipping line 268 warning: Unknown type error, skipping line 292 warning: Unknown type error, skipping line 306 warning: Unknown type error, skipping line 341 warning: Unknown type error, skipping line 342 warning: Unknown type error, skipping line 343 warning: Unknown type error, skipping line 374 warning: Unknown type error, skipping line 394 warning: Unknown type error, skipping line 396 warning: Unknown type error, skipping line 397 what can be the problem? Thanks

    Read the article

  • Prevent app from auto-launching in OS X - what are ALL the places to look?

    - by Justin Searls
    An app on a Mac that automatically launches on boot and I don't want it to. The app itself offers no way to prevent this. Rather than identify the app, I figured it would be nice to use this question as an opportunity to identify all the places such an app could hide. Here's where I've looked so far, and I still haven't found it: Accounts - Login Items Dock - Open at Login launchd - Cycled through each tab of agents & daemons in Lingon Other ideas?

    Read the article

  • Weird routing problems with VPN

    - by Borek
    In our VPN setup I have to add a route to my routing table like this: route add 1.2.3.0 mask 255.255.255.0 172.16.1.1 -p Our internal addresses 1.2.3.x then use 172.16.1.1 as their gateway and both my local internet and work VPN can work at the same time. However, when I disconnect from VPN and reconnect again, I can't ping our servers even though the connection status is "Connected". When I do route print my previously added route is listed but it doesn't seem to work. So I try to execute that 'route add' command again and as expected, it tells me that The route addition failed: The object already exists. But - and that's the point - when I now try to ping our servers again, everything works! So every time, I have to execute this route add command that will fail but fix the issue at the same time. Any ideas what I might be doing wrong? My PC is Windows 7 x64, I am Administrator, UAC is enabled and the command prompt is run with elevated privileges.

    Read the article

  • Can't Delete file Macbook Pro (Stuck in Trash)

    - by chris
    I dunno when I deleted this file (its an avi), its been in the trash for awhile. Today I went to empty the trash and this one file can't claims to be in use. But I have restarted, shut down my mac several times, I've also used my media player several times since last using that file. So I guess Im trying to find out how to find whats using the file or at least making it appear as such. So I can go about deleting it finally.

    Read the article

  • Can any body help me for this.. please..

    - by Abid Ali
    When do i run the set up of Adobe Reader, i get this error that this installer package could not be opened. verify that the package exist and that you can access it, or contact the application vendor to verify that this is a valid windows installer package... please help me Regards Abid

    Read the article

  • Format & Fresh Install Mac OS X Snow Leopard on Mac mini.

    - by sagar
    Hello Every one. I have purchased a DVD of Snow Leopard (Mac OS X 10.6.2) I purchased a Mac mini with Leopard (Mac OS X 10.5.7) I tried to install Mac OS X 10.6.2 Everything went perfectly. System was installed successfully. But the problem that I faced is as follows. System was installed but my older data remained as it is. (means installation didn't format every thing - means installation was done on upgrade basis.) Now, my system works with very low speed. Previous performance of Mac mini was double as compare to current upgrade version. Now - my question are as follows. Does an upgrade installation causes the performance issues in Mac OS X? Or is Snow Leopard too demanding for the Mac mini? ( 2 Ghz Intel Core 2 Duo, 1GB RAM - is this configuration OK for Snow Leopard? ) Does a fresh install work better than an upgrade?

    Read the article

  • Recover data from hard disk

    - by Hitesh Solanki
    Hi I have formatted my c: drive and window xp is installed successfully,but I cannot able to access d: drive. when I am trying to double click on the d: drive,following message is displayed: "the disk in drive D: is not formatted, do you want to format it now ? " When I am trying to access from command prompt,the following message is displayed: "The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted." So please help me.... Thanks in advance....

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Compaq Presario CQ40 unexpected turn off

    - by CRoshanLG
    My Compaq Presario CQ40 (yeah, its pretty old) suddenly turns off after about 1/2 - 1 hour usage without any notice or warning. The power cable and adapter works fine (indicator bulbs show that power is given to the laptop), but it seems like machine suddenly plugged off from the power source. And when I try to switch it on, after the sudden turn off it simply won't turn on. I can only turn it on after letting it to rest for at least couple of hours! ** The battery has been dead for some time now, but it has been working fine on direct power supply until recently. Has anyone encountered this? and hopefully knows any cure?

    Read the article

  • Windows Live Writer fails to start

    - by Albert Bori
    I installed windows live writer and configured it to connect to my xmlrpc enabled blog engine. After doing so, it threw an unrecoverable error and closed down. After attempting to restart windows live writer, it throws the following exception each time: Description: Windows Live Writer has encountered a problem: Invalid URI: The hostname could not be parsed. Problem signature: Problem Event Name: WindowsLiveWriter Problem Signature 01: CreateThis Problem Signature 02: 115 Problem Signature 03: System.UriFormatException Problem Signature 04: 15.4.3555.308 Problem Signature 05: 2.0.50727.5456 Problem Signature 06: Windows Live Writer OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Since I was unable to start windows live writer at all, I tried uninstalling it and removing all files associated with it in my "C:/users/[username]/appdata" folder. After that, I re-installed it and still get the error every time I try to launch the application. Does anyone know how I can get around this?

    Read the article

  • $PATH is not updated

    - by matr0sk1n
    It seems all about this was already discussed, but I can't resolve my problem. I have all necessary strings in /etc/paths /usr/bin /bin /usr/sbin /sbin /usr/local/bin in ~/.bash_profile export PATH=$PATH:/usr/local/mysql/bin export PATH=$PATH:$HOME/.rvm/bin export PATH="$(brew --prefix php54)/bin:$PATH" export PATH="$(brew --prefix)/bin:$PATH" But every time I execute echo $PATH in terminal, I get only /usr/local/bin if I put .bash_profile strings to .profile or .bashrc I have no effect.

    Read the article

  • Connect to virtual host computer from within virtualbox

    - by Nicky De Maeyer
    I'm currently developing on an ubuntu karmic. For this I've installed lampp with a virtual host on apache so http://myproject/ is mapped to my project's root directory. Now to test the website in IE I've installed an XP machine on a virtualBox OSE. Ive managed to get the virtual host working on the XP by adding its to the hostfile, like this: 255.255.255.255 myproject where 255.255.255.255 is the ip adress of the host computer (my ubuntu). Now every day when I come to work and plug in my computer to the network, my IP has changed. so When i boot the XP I have to change the IP in the hostfile to my new IP. Is there any way where I can set the ip to somthing the XP will recognise as the host machine? I've tried replacing the IP in the hostfile by the host computer name, but that does not seem to work... This would make my like a bit easier :)

    Read the article

  • write-through RAM disk, or massive caching of file system?

    - by Will
    I have a program that is very heavily hitting the file system, reading and writing randomly to a set of working files. The files total several gigabytes in size, but I can spare the RAM to keep them all mostly in memory. The machines this program runs on are typically Ubuntu Linux boxes. Is there a way to configure the file system to have a very very large cache, and even to cache writes so they hit the disk later? I understand the issues with power loss or such, and am prepared to accept that. Crashing aside, in normal operation the writes should eventually reach the disk! Or is there a way to create a RAM disk that writes-through to real disk?

    Read the article

  • Add panel to secondary monitor on Ubuntu 10.04

    - by Mr. Man
    I am running Ubuntu 10.04 Lucid Lynx and I was wondering if it is possible to put a panel on a secondary monitor. Here are methods I have tried which did not work: Click and drag the panel from the primary monitor to the secondary monitor Installing TwinView (couldn't find it) Thanks in advance!

    Read the article

< Previous Page | 933 934 935 936 937 938 939 940 941 942 943 944  | Next Page >