Search Results

Search found 32598 results on 1304 pages for 'ubuntu touch'.

Page 945/1304 | < Previous Page | 941 942 943 944 945 946 947 948 949 950 951 952  | Next Page >

  • Boot failure randomly. Can someone help?

    - by desgua
    I often get stuck at the boot on battery. I can suspend and hibernate without any trouble (even on battery). If I plug the energy cable everything goes right most of the time (edited June 13). Adding "acpi=off" doesn't solve the issue. Disabling power save from LAN at BIOS doesn't solve this too. Memory test seems to be ok: I can even compile a kernel without a problem: Has someone a tip for this? (I have the same questions marks in my mind as the image shows if not more :-/ ) obs.: this is an upgraded installation from Natty alpha. edited I (May 22): I've installed a brand new final 11.04 and got the bug again. edited II (June 13): I thought it was solved but it is not. After spending eight days off, the same problem happened even with the power cable connected. I had to reboot about 6 times until success. edited III (June 14): I can boot (even with battery) if I disconnect the cable and take off the battery for a few seconds. This lead me to conclude that maybe something is kept into memory of some hardware. Maybe or maybe not related but I also have touchpad issues (jumps) with this machine. edited IV (June 25): I opened gconf-editor and went to apps gnome-power-manager and disabled everything possibly related to suspend or hibernate. No help. Also I grabbed a Fedora live usb pendrive and got the same problem: So I think it is a hardware problem related issue.

    Read the article

  • Trim on encrypted SSD--Urandom first?

    - by cb474
    My understanding (I'm not sure I'm getting this all right) is that if one uses Trim on an encrypted SSD, it defeats some of the security benefits, because the drive will write zeros to empty space (as files are deleted). See: http://www.askubuntu.com/questions/115823/trim-on-an-encrypted-ssd And: http://asalor.blogspot.com/2011/08/trim-dm-crypt-problems.html My question is: From the perspective of the performance of the SSD and the functioning of Trim, would it therefore be better to simply zero out the SSD, before setting up an encrypted system, rather than writing random data to the drive, with urandom, as one usually does? Would this basically leave one with the same level of security anyway? And more importantly, would it better enable the Trim functionality to work as intended, with the encrypted SSD?

    Read the article

  • USB device not accepting address

    - by Mike Williamson
    I have a series of machines that I am building for work that have usb card readers. When I boot them I get a long series of messages: ... [ 2347.768419] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2347.968178] usb 1-6.6: new full-speed USB device number 10 using ehci_hcd [ 2352.552020] usb 1-6.6: device not accepting address 10, error -32 [ 2352.568421] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2352.768179] usb 1-6.6: new full-speed USB device number 12 using ehci_hcd [ 2357.352033] usb 1-6.6: device not accepting address 12, error -32 ... On some older machines this only takes a few attempts before the card reader finally accepts an address, while on newer machines it can take many minutes. Changing hardware is not an option and plugging the usb card reader into a different port is only an option for the older manchines. This was a problem under 11.04 and I am now running the 12.04 beta and its still happening. Is there something I can do in the software (a udev rule perhaps?) that would fix this? Any advice appreciated. I'm happy to provide more details if you need them.

    Read the article

  • System speakers not recognized

    - by Kyle Maxwell
    Since upgrading to Xubuntu 13.10, sound has not functioned properly (e.g. screeching when playing Skype notifications). Now, however, it does not function at all. pavucontrol only shows Dummy Output and does not recognize the built-in speakers on my Dell Precision M4600. Possibly related, the sound indicator applet does not come up when I click on it, only showing a small white bar underneath it. I have purged and reinstalled pulseaudio. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Dell Precision M4600 Flags: bus master, fast devsel, latency 0, IRQ 56 Memory at f2560000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 14a3 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel The "Capabilities: <access denied" line makes me wonder if there's a permissions issue, as the Log Out applet now shows "Restart" and "Shutdown" grayed out. groups shows me in: kmaxwell adm dialout cdrom sudo dip plugdev fuse lpadmin netdev sambashare vboxusers

    Read the article

  • Problem with RecordMyDesktop program

    - by Saeid87
    I am trying to record some tutorials using RecordMyDesktop application. The problem is the video becomes jagged and unusable as you can see from the screenshot I have taken while playing a saved video. I don't know what can be the problem, but I guess it has something to do with my graphics driver. My laptop is using Intel HD 3000 series and I couldn't find any update for it. If you know what might be the problem and how to solve it I will really appreciate it!

    Read the article

  • How to interpret this crontab command?

    - by Bakhtiyor
    I know that if I wrote in crontab -e following command 01 04 * * * somecommand then it will run somecommand at 4:01am on every day of every month. What happens if I wrote * * * * * somecommand? Will it run somecommand every single minute? Will this syntax work also? And it is possible to use special strings like @reboot, @daily, etc as it is explained here. At what time of the day somecommand will be executed if I write @daily somecommand command?

    Read the article

  • How can I reply to email by sending a delivery failure message?

    - by wau
    Occasionally, I receive unwanted emails, particularly low-volume spam, or email messages falsely addressed to me (possibly due to typos). I don't want to spend the energy to write a personal message, but I do want to let the sender know that the message never arrived at its destination, and that resending it will be useless. In my opinion, a delivery error message to the sender will fill that need. So, the question is if there is an easy way to send error messages back to the sender. Is there any email client out there which supports sending delivery failure messages as a reply to incoming email -- ideally in one click? (Or, which can be configured to do so?) Alternatively, what is the best way to set up an environment that allows me to send delivery failure messages without too much effort per message sent?

    Read the article

  • NetworkManager not populating resolv.conf

    - by Cerin
    I recently upgraded from 11.10 to 12.04, and now NetworkManager isn't populating /etc/resolv.conf when connecting to wireless networks, when it had been working perfectly in 11.10. I'm not seeing any explicit errors in either the NM UI or in syslog. How do I diagnose what's wrong? Edit: If I try to run resolvconf, I get the error "resolvconf: Error: /etc/resolv.conf isn't a symlink, not doing anything." What should it be a symlink to and/or how do I get NM to populate it? This says the symlink should point to /run/resolvconf/resolv.conf, but that file does not exist on my system.

    Read the article

  • Unity launcher autohide leaves "ghost" behind?

    - by Hailwood
    In 12.04 I had the launcher set to autohide, which worked perfectly. However in 12.10 I am getting a strange "ghost" issue. Take this screenshot, with me having a maximised google chrome window, mousing over the back button. As well as this, I also get another ghosting issue when I have the panel set with an opacity, whereby whatever is in approximately the middle left of the screen gets mirrored up to to panel, but only when I move/switch to a window. But that one is not so annoying as the autohide bug, how can I fix that?

    Read the article

  • Bash command history not working

    - by creepylol
    The command history between sessions is not getting saved. I'm using guake and the history for the session is working fine. I noticed that .bash_history had some commands I executed in "sudo -s" mode and tried the same again and all the commands while in the session got saved so I tried "chmod 777 .bash_history" Now the old commands appear at the start of a session but no new commands are getting saved Thanx in advance

    Read the article

  • Wireless doesn't work on a Broadcom BCM4312

    - by Boderick
    As stated, I've just upgraded to 12.04 and my Dell Inspiron 1545 isn't recognising its wireless card and I was wondering if anybody could help? Edit: Okay, so I found the wireless card by using lspci -vvv and it returned this: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- Kernel modules: ssb lsmod Module Size Used by dm_crypt 22528 0 joydev 17393 0 dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi dell_laptop 13671 0 dcdbas 14098 1 dell_laptop psmouse 72919 0 uvcvideo 67203 0 serio_raw 13027 0 videodev 86588 1 uvcvideo snd_hda_codec_idt 60251 1 mac_hid 13077 0 snd_hda_intel 32765 5 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec parport_pc 32114 0 rfcomm 38139 0 bnep 17830 2 ppdev 12849 0 snd_pcm 80845 3 snd_hda_intel,snd_hda_codec bluetooth 158438 10 rfcomm,bnep snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq binfmt_misc 17292 1 snd 62064 18 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp sky2 53628 0 ums_realtek 17920 0 uas 17699 0 i915 414603 3 wmi 18744 1 dell_wmi drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 usb_storage 39646 1 ums_realtek ifconfig -a eth0 Link encap:Ethernet HWaddr 00:23:ae:24:71:45 inet addr:192.168.1.158 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:aeff:fe24:7145/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14340 errors:0 dropped:0 overruns:0 frame:0 TX packets:10191 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15403754 (15.4 MB) TX bytes:1262570 (1.2 MB) Interrupt:18 ham0 Link encap:Ethernet HWaddr 7a:79:05:2d:b0:f7 inet addr:5.45.176.247 Bcast:5.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:5ff:fe2d:b0f7/64 Scope:Link inet6 addr: 2620:9b::52d:b0f7/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:27480 (27.4 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:433 errors:0 dropped:0 overruns:0 frame:0 TX packets:433 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:60051 (60.0 KB) TX bytes:60051 (60.0 KB) iwconfig lo no wireless extensions. ham0 no wireless extensions. eth0 no wireless extensions. the results for sudo lshw -class network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0c:00.0 logical name: eth1 version: 01 serial: 00:22:5f:77:1f:e6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f69fc000-f69fffff *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 13 serial: 00:23:ae:24:71:45 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.158 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:f68fc000-f68fffff ioport:de00(size=256) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:05:2d:b0:f7 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.45.176.247 link=yes multicast=yes port=twisted pair speed=10Mbit/s and the results of rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • How to change ownership for an external HDD?

    - by Angstrem
    I've got an external HDD (640 GB), with file system FAT32. I want to change the ownership of it from root (default) to angstrem (my username). The system is mounted to /media/exthdd. I try to do that by a command: sudo chown -vR angstrem:angstrem /media/exthdd and after that the system gives me an error: chown: changing ownership of `/media/exthdd': Operation not permitted If anybody knows, please tell me, how to change ownership of that HDD?

    Read the article

  • Why does 12.04 freeze when using multiple desktops?

    - by Dustin
    I am using 12.04 32-bit, upgraded from 11.10. Within the last week and a half Unity has hung on me with no option but a hard reboot, which I hate. It usually happens when I am using multiple desktops and applications and switching desktops. The screen just hangs, sometimes broken between desktops and applications, I can move my mouse but cannot click on anything. alt+f2 , HUD , super+w/s/d and alt+tab/~ does nothing, they do not activate. I let it rest for 15-20 minutes in hopes it will sort itself out but nothing. I'd hate to move to Unity 2D, but I can't risk having to do hard reboots/shutdowns, or moving to a different DE. Other information: the only PPA's I have added recently would be the word lens. 2.8GB RAM processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 127 model name : AMD Sempron(tm) Processor LE-1250 stepping : 2 microcode : 0x83 cpu MHz : 1000.000

    Read the article

  • Dynamic Document Template

    - by ell
    I would like to create a "C++ Class" document template, I know you can make static ones by putting them into ~/Templates, but I would like to be able for the content to change according to the file name on creation, for example, using a template like such (pseudocode): #ifndef $(filename)_HPP_INCLUDED #define $(filename)_HPP_INCLUDED class $(filename) { public: } #endif $(filename)_HPP_INCLUDED Is this possible? If so, how can I do it? Thanks in advance, ell.

    Read the article

  • Need help configuing juju on Windows 8

    - by Claude Tyler McAdams
    I am trying to get Juju working on Windows 8 but I am running in to some errors when trying to get juju to see my ssh keys: C:\Users\username> juju bootstrap error: error parsing environment "azure": read C:\Users\user\SkyDrive\Documents\Azure\ssh\: The handle is invalid. I've added a public key I generated with putty to the directory above called azure My environments.yaml file has this in it: authorized-keys-path: C:\Users\user\SkyDrive\Documents\Azure\ssh\ Any ideas?

    Read the article

  • Problems installing clamcour

    - by user10778
    Hello People, when i try to install clamcour from terminal, it gives me this error, somebody can help me? calmcourdir# ./configure checking for libraries containing socket functions... -lc checking for socket... yes checking for bind... yes checking for listen... yes checking for accept... yes checking for shutdown... yes checking for socklen_t... yes checking for struct sockaddr_un.sun_len... no System log functions checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for openlog... yes checking for syslog... yes checking for closelog... yes Time functions checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for localtime_r... yes checking for strftime... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for sysconf... yes BZip2 support checking bzlib.h usability... no checking bzlib.h presence... no checking for bzlib.h... no checking for BZ2_bzWriteOpen in -lbz2... no GZip support checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for gzopen in -lz... no LibClamAV support checking for /usr/bin/clamav-config... no checking for /usr/local/bin/courier-config... no checking for /usr/clamav/bin/clamav-config... no checking for /usr/local/clamav/bin/clamav-config... no ./configure: line 25234: : command not found configure: error: Cannot find clamav-config

    Read the article

  • Recording slow web stream

    - by Budric
    I'm trying to record an mpeg2 video stream from a website that doesn't have the greatest bandwidth. The video often buffers. I want to download the stream and watch it offline. The extract stream format received is: Stream #0.0[0x44]: Audio: mp2, 48000 Hz, stereo, s16, 192 kb/s Stream #0.1[0x45]: Video: mpeg2video (Main), yuv420p, 704x576 [PAR 16:11 DAR 16:9], 15000 kb/s, 27.19 fps, 25 tbr, 90k tbn, 50 tbc I use the following tool to transocde the stream: ffmpeg -i "http://url" -y -vcodec libx264 -b 3000k -acodec copy /tmp/stream.mp4 Unfortunately after a few seconds ffmpeg stops recording with an error [mpegts @ 0x1f0b9c0] PES packet size mismatch [mp2 @ 0x1f14640] incomplete frame Error while decoding stream #0.0 [mpeg2video @ 0x1f16860] ac-tex damaged at 0 26 [mpeg2video @ 0x1f16860] Warning MVs not available I've tried encoding with vlc as well with similar issues. Although vlc doesn't stop encoding, the output video has regions where it hangs. vlc -I dummy "http://url" --network-caching="1000" --sout="#transcode{vcodec=h264,vb=3000,acodec=mp3,ab=192}:std{access=file,mux=mp4,dst=/tmp/stream.mp4}" [mpeg2video @ 0x7f2d4c001e20] ac-tex damaged at 9 33 [mpeg2video @ 0x7f2d4c001e20] Warning MVs not available [mpeg2video @ 0x7f2d4c001e20] concealing 132 DC, 132 AC, 132 MV errors [mpeg2video @ 0x7f2d4c001e20] ac-tex damaged at 16 17 [mpeg2video @ 0x7f2d4c001e20] Warning MVs not available [mpeg2video @ 0x7f2d4c001e20] concealing 836 DC, 836 AC, 836 MV errors libdvbpsi error (PSI decoder): TS discontinuity (received 4, expected 3) for PID 0 I also tried flv transcoding and it shows up with its own set of issues, like output flv file hangs in certain parts. Anyone know what's wrong or how to fix this?

    Read the article

  • How do I provide arguments to an application launcher in kde?

    - by bobdobbs
    So I can create launchers in a quicklaunch thing on the kde desktop. The launchers are easy to create, and work most of the time. What I haven't figured out, is how to pass arguments to the applications that I want to launch. I want to launch the firefox profile manager and I also want to add a launcher for an emacsclient frame. For emacsclient, I've tried these: emacsclient -c "emacsclient -c" 'emacsclient -c' None of them work. When I click the launcher, the tiny emacs logo appears attached to the mouse pointer, and stays there for at least a couple of minutes, but no new frame opens. So, how can I actually open an emacsclient frame, or any other application with an argument from quicklaunch?

    Read the article

  • help bonding streaming rtp 3g

    - by enrique
    first sorry for contact me here. Recuro to you after reading all the material I found about it and so it does not get set. My question is: I can configure load balancing in any way out? I have a hub with 3 USB 3G modems, I got the 3 simultaneously connect with an upload speed of about 500kb in each approx. and a dynamic ip each. I do a unicast streaming with vlc rtp with a bandwidth of 1.5mb. Bone the sum of the three modems. I was searching on ifenslave, iproute. Then I found a draft vlc MultiCat. I understood that this could end, but configure it only moves a card. If I can help extend the information willingly. From now eternally grateful.

    Read the article

  • Why can't I copy files to var/www/html?

    - by Alaa M.
    I copy some files, go to /var/www/html, right click, Paste isn't available. Why is that? I tried the command sudo nautilus, it opened the files navigation window, I navigated to /html, still the same problem. I also tried gksudo nautilus but it said: The program 'gksudo' is currently not installed. You can install it by typing: sudo apt-get install gksu I installed it, tried again, same problem. What should I do? edit: Figures that I was accessing the files inside a .zip directory and I shoulda extracted them first. Solved

    Read the article

  • juju deploy issues

    - by Eduard Lugo
    I'm trying to run juju deploy from my local repository, when I do I get this message. WARNING failed to load charm at "/home/eduard/charms/precise/hooks": open /home/eduard/charms/precise/hooks/metadata.yaml: no such file or directory WARNING failed to load charm at "/home/eduard/charms/precise/hooks": open /home/eduard/charms/precise/hooks/metadata.yaml: no such file or directory Added charm "local:precise/stack-48" to the environment. The charm is running normally but I like this ad Quu not continue appearing. I appreciate the help in advance

    Read the article

  • Set usergroup and persmissions ftp folder back to default

    - by OrangeTux
    Argh, I tried to create a new ftp user via the commandline. But i did something wrong and now I can access the server via FTP but I can't see any files. It doesn't make any sense wich user I'm using. ls -la drwxr-xr-x 13 root ftp 4096 2012-03-30 09:47 . drwxr-xr-x 7 web6 ftp 4096 2012-03-26 09:28 .. drwxr-xr-x 4 web6 ftp 4096 2012-03-26 13:31 actions drwxr-xr-x 2 web6 ftp 4096 2012-03-26 11:46 bin -rwxr-xr-x 1 web6 ftp 1520 2012-03-24 23:32 changelog.txt drwxr-xr-x 2 web6 ftp 4096 2012-03-26 13:30 css drwxr-xr-x 8 web6 ftp 4096 2012-03-24 22:43 external -rwxr-xr-x 1 web6 ftp 333 2012-03-26 15:12 .htaccess drwxr-xr-x 3 web6 ftp 4096 2012-02-27 15:07 images -rwxr-xr-x 1 web6 ftp 1606 2012-03-26 21:25 index.php drwxr-xr-x 2 web6 ftp 4096 2012-02-18 13:20 js drwxr-xr-x 2 web6 ftp 4096 2012-02-03 00:34 layout drwxr-xr-x 2 web6 ftp 4096 2012-03-29 23:35 library drwxr-xr-x 2 web6 ftp 4096 2012-03-30 09:47 log -rwxr-xr-x 1 web6 ftp 396 2012-03-24 15:04 menu.php drwxr-xr-x 2 web6 ftp 4096 2012-03-30 12:01 python drwxr-xr-x 2 web6 ftp 4096 2012-03-23 10:51 todo I can't see no dirs and files because I changed the groupowner or I changed the rights of the groupowner of the ftp dir. How can I set the ownership of the files back to default so I can access the files via FTP again? Many thanks in advance

    Read the article

  • Why dosn't Ubunto like my HP Pavilion G7?

    - by user109379
    I installed Ubunto onto my HP Pavillion G7 1330dx without much problem, but it took 3 or more tries to get it to boot up after. Then , I started over and installed Mint, no problems installing or booting up. BUT, I decided I I liked Ubunto better so I wiped my hard drive and installed Ubunto ( this time the 32 bit) ,It runs great once i finally get it to boot, it takes 3 or more tries again. Whats the deal? I really like it but really don't know what I'm doing. I've been a Windows guy until a couple days ago.

    Read the article

  • Why won't this application start when I log in?

    - by George Edison
    I have a file in ~/.config/autostart/ that looks like this: [Desktop Entry] Type=Application Exec=python ~/Documents/StackApplet/stackapplet.py Icon=/usr/share/pixmaps/stackapplet.png Terminal=false Comment=a panel indicator for monitoring StackExchange sites Name=StackApplet Categories=Utility; Unfortunately, it isn't working - the application is not starting when I log in. If I open a terminal and copy-and-paste the command listed in Exec above, then the application runs just fine. What am I doing wrong?

    Read the article

  • Icons missing from launcher, system settings, folders

    - by Giannis Rizos
    Various icons from launcher are missing. The first one is from Home folder menu the second from Terminal the last one from Desktop Switcher. This happened after I upgraded to 11.10 from 11.04. I have created a New (Untitled Folder) folder in my desktop and the icon is missing too. The same occurs in System Settings menu too. Some icons like Appearance, Keyboard Layout are missing too. Sorry but I can't post a screenshot due to my reputation. Any suggestions?

    Read the article

< Previous Page | 941 942 943 944 945 946 947 948 949 950 951 952  | Next Page >