Search Results

Search found 31360 results on 1255 pages for 'virtual address space'.

Page 948/1255 | < Previous Page | 944 945 946 947 948 949 950 951 952 953 954 955  | Next Page >

• Benchmarking a file server

  - by Joel Coel

  I'm working on building a new file server... a simple Windows Server box with a few terabytes of disk space to share on the LAN. Pain for current hard drive prices aside :( -- I would like to get some benchmarks for this device under load compared to our old server. The old server was installed in 2005 and had 5 136GB 10K disks in RAID 5. The new server has 8 1TB disks in two RAID 10 volumes (plus a hot spare for each volume), but they're only 7.2K rpm, and of course with a much larger cache size. I'd like to get an idea of the performance expectations of the new server relative to the old. Where do I get started? I'd like to know both raw potential under different kinds of load for each server, as well an idea of what our real-world load looks like and how it will translate. Will disk load even matter, or will performance be more driven by the network connection? I could probably fumble through some disk i/o and wait counters in performance monitor, but I don't really know what to look for, which counters to watch, or for how long and when. FWIW, I'm expecting a nice improvement because of the benefits of having two different volumes and the better RAID 10 performance vs RAID 5, in spite of using slower disks... but I'd like to get an idea of how much.

  Read the article

• one way routing

  - by user101531

  I have two computers connected with VPN, and some virtual machines on each. I want everything to see each other (that is basically 4 different networked machines). What I've not managed so far is that a computer on the one end to be visible to the other end. In tracert terms: 192.168.78.42>tracert 192.168.69.18 Tracing route to WIN-2K8R2 [192.168.69.18] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.78.17 2 * * * Request timed out. 3 217 ms 78 ms 78 ms WIN-2K8R2 [192.168.69.18] Trace complete. 192.168.78.42>tracert 192.168.69.112 Tracing route to 192.168.69.112 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.78.17 2 333 ms * 337 ms WIN-2K8R2 [192.168.86.22] 3/4/5 * * * Request timed out. 6 ^C 192.168.69.18>tracert 192.168.69.112 Tracing route to 192.168.69.112 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.69.112 Trace complete. 192.168.69.112>tracert 192.168.78.42 Tracing route to 192.168.78.42 over a maximum of 30 hops 1 1 ms * <1 ms 192.168.69.18 2 79 ms 77 ms 80 ms 192.168.86.21 3 80 ms 77 ms 81 ms 192.168.78.42 Trace complete. Note: the 4 machines are 192.168.69.112 (winXP), 192.168.69.18=192.168.86.22 (win2K8R2), 192.168.86.21=192.168.78.17 (Linux), 192.168.78.42 (win2K3). The VPN is a TAP openvpn connection between 192.168.86.21 and 192.168.86.22. I would say that the problem is in the win2K8 machine, but Windows networking is my weak point.

  Read the article

• Access All VLANS over XenServer Interface

  - by Garrett

  For my current setup, I have a physical NIC on a XenServer machine that receives traffic tagged with various VLAN IDs. I have a virtual machine that is running Vyatta that needs to be able to access both tagged and untagged traffic in order to route traffic. Here's the problem: 1) If I bind the NIC in XenCenter to the VM (which has no VLAN ID associated with it), the VM cannot see any tagged traffic. I have verified this using tcpdump. However, the tagged traffic is flowing into the XenServer machine perfectly fine. 2) I have more than 7 VLANs, so adding each VLAN as an interface within XenCenter isn't an option. 3) Even though tcpdump shows no tagged traffic coming in the VMs NIC, I have tried adding VLAN interfaces within Vyatta. This also doesn't work. I have tried using both Linux bridge and openvswitch setups and neither seem to work. I am running XenServer 6.0.3 free and Vyatta VC6.3. Please help! I've run out of ideas. I've googled for hours and can't seem to find anything.

  Read the article

• IBM HS23 Blade Server (7875) onboard NIC driver for linux

  - by Igor Spivak

  I work with IBM HS23 Blade Server (7875). It's onboard NIC adapter is: Emulex OCl11104-F-X Virtual Fabric Adapter 2-port 10GB and 2-port 1GB LOM . I'm tryed to the following Linux OS with the server: 2.6.32-22-generic-pae #36-Ubuntu SMP. and discovered my OS has not proper Network drive installed (for the NIC adapter described above). After investigation I made, I discovered that the driver I need is "be2net" placed in "net" directory of the linux under the folder "be2net". I managed to download this driver with the latest package for my kernel. Driver info ("modinfo be2net" result) is as follows: --------------------------------------------------------------------------------------- filename: /lib/modules/2.6.32-22-generic-pae/kernel/drivers/net/benet/be2net.ko license: GPL author: ServerEngines Corporation description: ServerEngines BladeEngine2 10Gbps NICDriver 2.101.205 version: 2.101.205 srcversion: 199ADD251CB874C3727CC47 alias: pci:v000019A2d00000710sv*sd*bc*sc*i* alias: pci:v000019A2d00000701sv*sd*bc*sc*i* alias: pci:v000019A2d00000700sv*sd*bc*sc*i* alias: pci:v000019A2d00000221sv*sd*bc*sc*i* alias: pci:v000019A2d00000211sv*sd*bc*sc*i* depends: vermagic: 2.6.32-22-generic-pae SMP mod_unload modversions 586TSC parm: rx_frag_size:Size of a fragment that holds rcvd data. (uint) --------------------------------------------------------------------------------------- After starting linux, I get the following error: be2net 0000:16:00.x: Emulex OneConnect 10Gbps NIC (be3) initilization failed. I checked the same server with another Linux version (Red-Had 5.5.1.0) and the NICs worked properly, so seems there is no problem in HW. Also, on IBM or Emulex offical sites I managed to find drivers only for Red-Had and SUSE versions.

  Read the article

• Why is my Current Printer unavailable in Office ?

  - by cros

  Whenever I try to print any document from Microsoft Office 2007 in Windows Vista 64-bit there is a great possibility that the print job will fail with the following error message: Current printer is unavailable. Select another printer. Only problem is no printer works, not even Bullzip PDF Printer. The only way to resolve this that I have found so far is a reboot, but I don't want to do that all the time. I am using Windows Vista 64-bit. I've had the problem using both SP1 and SP2. The problem occurs on both locally installed and network printers, as well as the virtual printer Bullzip PDF Printer. My primary source of the problem has been Excel, but the error has also occurred in Word. Changing the default printer and restarting the Microsoft Office-application solves this temporarily, but not permanently. Google:ing the error message returns a lot of questions but no solutions, so seems like a frequent problem. What could be a permanent solution for this problem? UPDATE: It seems that my problem stems from me opening MS Office applications by opening a document from Total Commander with administrative rights. This somehow makes the applications not find the printers. Opening MS Office applications either from the Start menu or by opening a document in a non-administrator Explorer allows me to print.

  Read the article

• Trying to run an ASP.NET MVC application using Mono on Apache with FastCGI

  - by Arda Xi

  I have a hosting account with DreamHost and I would like to use the same account to run ASP.NET applications. I have an application deployed in a subdomain, a .htaccess with a handler like this: # Define the FastCGI Mono launcher as an Apache handler and let # it manage this web-application (its files and subdirectories) SetHandler monoWrapper Action monoWrapper /home/arienh4/<domain>/cgi-bin/mono.fcgi virtual My mono.fcgi is set up as such: #!/bin/sh #umask 0077 exec >>/home/arienh4/tmp/mono-fcgi.log exec 2>>/home/arienh4/tmp/mono-fcgi.err echo $(date +"[%F %T]") Starting fastcgi-mono-server2 cd / chmod 0700 /home/arienh4/tmp/mono-fcgi.sock echo $$>/home/arienh4/tmp/mono-fcgi.pid # stdin is the socket handle export PATH="/home/arienh4/mono/bin:$PATH" export LD_LIBRARY_PATH="/home/arienh4/mono/lib:$LD_LIBRARY_PATH" export TMP="/home/arienh4/tmp" export MONO_SHARED_DIR="/home/arienh4/tmp" exec /home/arienh4/mono/bin/mono /home/arienh4/mono/lib/mono/2.0/fastcgi-mono-server2.exe \ /logfile=/home/arienh4/logs/fastcgi-mono-web.log /loglevels=All \ /applications=/:/home/arienh4/<domain> I took this from the Mono site for CGI. I'm not sure if I'm doing it correctly though. This code is resulting in this error: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. I have no idea what's causing this. As far as I can see, Mono isn't even hit (no log files are created).

  Read the article

• Iomega eGo Encrypt Plus Encrypted Partition not mounting properly says "local disk"

  - by mosiac

  I'm working with an Iomega eGo 500gb Encrypt Plus portable drive. When I first set it up and installed the software and set a user password everything worked fine. The partition labeled "IomegaHDD" mounted properly and I could access the free space. Then I changed the ADMIN password which required me to lockout the device, wait 60 seconds, and then login to the Admin section and change the password, lockout the device again, wait 60 seconds, and then log back in with my user password. When I did that it of course unmounted the IomegaHDD partition to secure it, when it remounts it, it only shows up as "local disk" now and will not remount properly. I had not removed the cable while doing any of this. I have since tried unplugging and plugging back in to login to the drove but that has not worked. I'm wondering if I should remove every instance of "generic usb hub" from device manager and wait for it to re-add itself, or move it to a new set of USB ports temporarily to seee if that helps. Any ideas?

  Read the article

• Simple P2V help from Linux to Windows

  - by Ke.

  I have two OS's installed on different drives in my PC. One linux (Centos 5.4) and one windows 7. Its getting tiresome to constantly have to stop and restart the PC when I want to use either OS. I would very much like to use Windows 7 as my host OS and access my linux OS from within Windows. However, im having trouble deciphering exactly how to do this (many of the articles seem confusing and a bit overkill) From what i have seen its possible to use VMWare converter to convert the physical linux image to a virtual image so that I can use it in windows. As im having problems understanding how this is done, I would really appreciate a step by step guide (for a newbie), or any simple tutorials that you can point me at. Some questions beforehand: 1) My linux image is around 80gb, do i need to take this into consideration? The linux drive is around 180gb in total. All my other drives are NTFS non writeable in linux (as I use them in windows and ntfs is dodgy in linux), so probably not possible to move the image over to my ntfs drives 2) Can I just zip the linux files up somehow and transfer it to windows to create the p2v? 3) Is it possible to do the P2V conversion while I am logged into windows. I can see the actual linux drive loaded in disk manager, but windows doesnt read linux file systems so im confused as to how to access the linux drive if this is possible. 4) Or will i need to do the whole p2v conversion inside linux? Cheers, any help is much appreciated Ke (a confused p2v newbie)

  Read the article

• APC fragmention woes on Apache AWS EC2 Small instance with WordPress and W3TC

  - by two7s_clash

  AWS EC2 Small instance, Apache 2 running WordPress and W3TC. Within an hour, my APC fragmentation hits 100%. My APC settings are: apc.enabled = 1 apc.shm_segments = 1 apc.shm_size = 100M apc.optimization = 0 apc.num_files_hint = 512 apc.user_entries_hint = 1024 apc.ttl = 7200 apc.user_ttl = 7200 apc.gc_ttl = 3600 apc.cache_by_default = 1 apc.use_request_time = 1 apc.filters = "apc\.php$" apc.mmap_file_mask = "/tmp/apc.XXXXXX" apc.slam_defense = 0 apc.file_update_protection = 2 apc.enable_cli = 0 apc.max_file_size = 2M apc.stat = 1 apc.write_lock = 1 apc.report_autofilter = 0 apc.include_once_override = 0 apc.rfc1867 = 0 apc.rfc1867_prefix = "upload_" apc.rfc1867_name = "APC_UPLOAD_PROGRESS" apc.rfc1867_freq = 0 apc.localcache = 0 apc.localcache.size = 256M apc.coredump_unmap = 0 apc.stat_ctime = 0 apc.canonicalize = 1 apc.lazy_functions = 0 apc.lazy_classes = 0 /etc/php.d/apc.ini More poop can be seen here. Mostly cribed settings from here. The shm was meant to be whittled down from such a high value after some observation, but apparently such a large value isn't even high enough.... I found an similar question/answer here. I do have some virtual hosts setup, but they aren't being touched much at all. Having users logged into the admin panel of WP does make things worse, but that's certainly not the main culprit. The question asker seems to suggest that it turns out W3TC is probably causing the problem, which the plugin author seems to agree with, but there aren't any helpful details beyond that. Why is it causing the problem? Do I just take it for now and turn off object caching with APC? Is there nothing I can do? Does having it turned on without being used for object caching actually help anything? Would memcache be an ok substitute just for object caching here? Finally, maybe I just shouldn't worry so much about the fragmentation?

  Read the article

• VMWare ESX, storage over 2TB

  - by Phliplip

  Hi, First of, i'm a webdeveloper and my server experience lies in setting up FreeBSD servers for webserver. I'm working on a project for at photographer, and i'm hired to develop a new online photo ordering system - where user of course can view their photos :) They have a massive need of storage, thus we have bought a HP G6 and 8x1TB SATA HDD. Our plan is to install VMWare ESX 4.0, running multiple virtual machines; FreeBSD 8 for webserver and some windows servers. Allready done that. Then mount one big storage to the BSD, and share it through Samba to the WinServers. The raid is set up with an array of 2x 1TB to handle the VMs. And the rest is setup as 3 2x1TB to handle the photo-data. Thus 2.73TB for photo-data (the raids are 1+0). Now if we add a datastore in the ESX and add the 3 LUNs we can get a datastore of 2.74TB. But i don't se how i can add this datastore direct to the VM. Only the BSD VM needs access to this. Only way is to create a VirtualDisk, with a max of 2TB (8MB blocksize). This is because the datastore where we save the virtualdisk has a maximum filesize of 2TB. Then add it as a harddisk to the BSD VM. In the 'Add Harddisk' pane for the VM, i see an option for Raw Disk Management. I think this is to access the datastore or the raid directly. Only problem is that its greyed out! Can i access the datastorage directly from the BSD? Without creating and adding virtualdisk.

  Read the article

• Setting up SQL Server 2005 to use all available memory in 32bit Windows Server 2003 - and verifying

  - by Rizwan Kassim

  There are a number of questions along this line - but they either sometimes contradict each other, or don't show how to properly verify that everything is actually working - hopefully this can be comprehensive... I'm running SQL Server 2005 SP3 Standard on Windows Server 2003 R2 Standard. My server has 8GB of memory installed - my system is almost entirely used as a Database Server - there are some services running on them, but the OS + services can run within 1Gb of RAM. What I've done (please tell me if I'm doing something wrong): /3GB in the boot.ini. (To increase the amount of user-space memory available - info) /PAE in the boot.ini. (Windows claimed to be doing PAE even without this switch, somethow.) Enabled AWE in SQL Server. Enabled Lock Pages in Memory Option for users SYSTEM and Local Service. (info). SQL Server Standard doesn't seem to use this until Cumulative Update 4, which isn't installed on my server. (info) Set Min/Max Memory to : 1024Mb/5112Mb After doing all the above, we definately saw a level of improvement - but I'd like now to verify my settings, make sure that I'm making full use of the memory available. (There appeared to be a slowdown when max = 7Gb, so I edged off from that value, but it might have been just perceptual.) To verify, I checked the following levels in PerfMon : Process(sqlserv):Working Set : 76386304 SQL Server(Memory Manager) : Total Server Memory : 3538944 (I saw a doc that noted that this wasn't the full memory used by SQL Server, so I'm not sure whether to trust it) So -- my questions... Should my max be around 7Gb? If not, what should it be? Why is total server memory at 3.5G, when it's been allocated 5G? What is the proper metric for the amount of memory allocated to SQL Server? The Working Set seems a bit large... Am I possibly missing any steps in the setup? Any recommended resources on starting to tune the caching system now? Thanks

  Read the article

• MSSQL 2000 installation error: Setup failed to configure the server. Refer to the server error logs.

  - by kaneuniversal

  I'm trying to install MSSQL 2000 on a virtual Windows 2003 instance. However, every time I run the install program, it fails to start the service. This is the error log: 21:46:50 C:\Program Files\Microsoft SQL Server\80\Tools\Binn\cnfgsvr.exe -F "C:\WINDOWS\sqlstp.log" -I MSSQLSERVER -V 1 -M 0 -Q "SQL_Latin1_General_CP1_CI_AS" -H 131408 -U sa -P ############################################################################### Starting Service ... SQL_Latin1_General_CP1_CI_AS -m -Q -T4022 -T3659 Connecting to Server ... driver={sql server};server=xxxxxxxxxx;UID=sa;PWD=;database=master [Microsoft][ODBC SQL Server Driver]Timeout expired driver={sql server};server=xxxxxxxxxx;UID=sa;PWD=;database=master [Microsoft][ODBC SQL Server Driver]Timeout expired driver={sql server};server=xxxxxxxxxx;UID=sa;PWD=;database=master [Microsoft][ODBC SQL Server Driver]Timeout expired SQL Server configuration failed. ############################################################################### 21:49:34 Process Exit Code: (-1) 22:19:04 Setup failed to configure the server. Refer to the server error logs and C:\WINDOWS\sqlstp.log for more information. 22:19:04 Action CleanUpInstall: 22:19:04 C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\SqlSetup\Bin\scm.exe -Silent 1 -Action 4 -Service SQLSERVERAGENT 22:19:05 Process Exit Code: (1060) The specified service does not exist as an installed service. 22:19:05 C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\SqlSetup\Bin\scm.exe -Silent 1 -Action 4 -Service MSSQLSERVER 22:19:05 Process Exit Code: (0) 22:19:05 StatsGenerate returned: 2 22:19:05 StatsGenerate (0x0,0x1,0xf00000,0x200,1033,303,0x0,0x1,0,0,0 22:19:05 StatsGenerate -1,Administrator) 22:19:05 Installation Failed. Has anyone had this problem? Any ideas about how to fix it? Thanks very much, Michael

  Read the article

• ssl_error_rx_record_too_long connection error with SSL site in Firefox

  - by Thomas

  I am trying to set up SSL in Apache but when I go to the server in Firefox I get the following error message: An error occurred during a connection to sludge.home. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) My virtual host config file looks like this. <IfDefine SSL> <VirtualHost *:443> ServerName sludge.home SSLEngine on SSLCertificateFile /usr/local/apache/cert/server.crt SSLCertificateKeyFile /usr/local/apache/cert/server.pem SSLProtocol -SSLv2 SSL CipherSuite HIGH:!ADH:!EXP:!MD5:!NULL DocumentRoot "/usr/local/apache/htdocs" ServerAdmin [email protected] <Location /> AuthType Digest AuthName "private area" AuthDigestDomain / AuthDigestProvider file AuthUserFile /usr/local/apache/passwd/digest_pw Require valid-user </Location> <Directory /usr/local/apache/htdocs/bugz> AddHandler cgi-script .cgi Options +Indexes +ExecCGI DirectoryIndex index.cgi AllowOverride Limit FileInfo Indexes </Directory> <Directory /usr/local/apache/htdocs/bugzilla> AddHandler cgi-script .cgi Options +Indexes +ExecCGI DirectoryIndex index.cgi AllowOverride Limit FileInfo Indexes </Directory> <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "/usr/local/apache/htdocs"> Options Indexes FollowSymLinks Allow Override None Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.html </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> </VirtualHost> </IfDefine> A telnet to this server reveals that server is sending plain HTML back. Further more it seems as though mod_ssl is not loaded/working even though when I httpd -l it shows up as being statically compiled in. I have exhausted most avenues I can think of.

  Read the article

• qemu-img: Could not open $FILE

  - by HTTP500

  I received a single-file VMDK from a vendor that has a virtual appliance for a particular product I'm interested in evaluating. We run a KVM solution (Proxmox) so I tried converting the file but on that system qemu-img blows up. (I was able to convert (multipart) VMDK files from bitnami without error.) So I figured I'll just yum install qemu-img on a RHEL 6.3 VM and do it there. But despite the fact that I can file the file just fine when I run qemu-img on it I get this error that it can't open the file: [root@host dir]# file 1.vmdk 1.vmdk: VMware4 disk image [root@host dir]# qemu-img info 1.vmdk qemu-img: Could not open 'vmdk' I've seen some other people post on the interwebs that they've had this problem but none of them seem to have a resolution. Does anyone have any ideas? I have checked the MD5SUM already. EDIT1: [root@host dir]# qemu-img info -f vmdk 1.vmdk qemu-img: Could not open '1.vmdk' EDIT2: Ran strace per suggestion. Not sure what to look for... Here is a possible: ioctl(3, CDROM_DRIVE_STATUS, 0x7fffffff) = -1 ENOTTY (Inappropriate ioctl for device)

  Read the article

• How do you host multiple public facing websites on a VPS?

  - by pedroarvy

  We host about 30 websites using typical shared hosting plans using ASP.NET and SQL 2000/2005/2008. I am now wondering about hosting all of these websites using our own virtual private server. This is clearly cheaper but comes with a lot of questions I need answers to: Is the risk of having to keep this VPS server up and running worth it? Until now, the host provider has managed the server and we have not had to worry about crashes, downtime, software patches etc. We are not server administrators, we are programmers, so this is not really our expertise. On the other hand, it may not be hard to learn. When we make a website live, we log in to a domain management control panel and change the primary and secondary name servers to point to our shared web host: Eg ns1.sharedwebhost.com and ns2.sharedwebhost.com These name servers are going to have to change when we have a VPS. I don’t understand anything about how to set this up. Is there some useful info anyone could direct me to? Or is there software we need to install to make the primary and secondary name servers work on our VPS? The control panel we have for shared hosting comes with DNS management like this: http://www.yart.com.au/stackoverflow/dns.png What software would I need to install to create this for each site we host at a VPS? The control panel we have for shared hosting also comes with a POP email interface that allows email addresses to be added easily by our customers. Is this something that can be easily set up at a VPS so clients can manage their own email addresses? Is there software we need to install to make this work?

  Read the article

• windows 8.1 upgrade fails with error code 0xc1900101-0x20017

  - by cmorse

  I just tried to install windows 8.1 on my laptop, but it fails to install with the message: Sorry we couldn't complete the update to Windows 8.1. We restored your previous version of Windows to this PC 0xC1900101 - 0x20017 It looks like on the first boot that the laptop is going to the PC restore screen (it asks what kind of keyboard I have, and then what repair optins I would like to take). Thus far I have just been selecting "Continue to windows 8." I'm running a Lenovo x220i tablet. I've got 43GB of free disk space. It installed just fine on my desktop. The primary difference between the two machines is that the desktop has media center install, and isn't using TrueCrypt. Full WindowsUpdate.log http://pastebin.com/hGmAW4Q1 Most important portion of WindowsUpdate.log: 2013-10-17 10:41:06:671 964 694 Agent ************* 2013-10-17 10:41:06:671 964 694 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2013-10-17 10:41:06:671 964 694 Agent ********* 2013-10-17 10:41:06:671 964 694 Agent * Online = No; Ignore download priority = No 2013-10-17 10:41:06:671 964 694 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2013-10-17 10:41:06:671 964 694 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2013-10-17 10:41:06:671 964 694 Agent * Search Scope = {Machine & All Users} 2013-10-17 10:41:06:671 964 694 Agent * Caller SID for Applicability: S-1-5-18 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {AD47FBDC-F7F9-4E7F-BAF4-DBA3784C7101} 2013-10-17 10:41:06:436-0600 1 202 [AU_REBOOT_COMPLETED] 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed. 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {8D4E7A67-9526-4702-A897-5BE5F97497AF} 2013-10-17 10:41:06:639-0600 1 204 [AGENT_INSTALLING_FAILED_POST_REBOOT] 101 {8951E70D-4332-4F7C-B92D-D9362E384959} 1 c1900101 WSAcquisition Failure Content Install Installation Failure Post Reboot. 2013-10-17 10:41:07:249 964 870 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2013-10-17 10:41:07:249 964 870 Report WER Report sent: 7.8.9200.16715 0xc1900101(0x20017) 8951E70D-4332-4F7C-B92D-D9362E384959 Install 101 Unmanaged 2013-10-17 10:41:07:249 964 870 Report CWERReporter finishing event handling. (00000000)

  Read the article

• SSI includes not working on Debian with Apache

  - by Mike

  I'm trying to get SSI to work on Debian running Apache, however the .shtml files are not being parsed. From a PHP file with phpinfo() I can see that the following show up in the loaded modules section: mod_mime_xattr mod_mime mod_mime_magic In /etc/apache2/mods-enabled/mime.conf I have (among other things): AddType text/html .shtml AddOutputFilter INCLUDES .shtml In /etc/apache2/sites-enabled/domain.com.conf (for the virtual host in question) I have: <Directory /home/username/public_html> Options +Includes allow from all AllowOverride All </Directory> and for good measure, I added the following as well: <Directory /> Options +Includes </directory> In the user's .htaccess file, I tried adding: Options +Includes AddType text/html shtml AddHandler server-parsed shtml Nothing seems to work. How can I even debug this? Edit: Here is the output of ls /etc/apache2/mods-enabled/ in case this helps actions.conf dav_svn.load proxy_balancer.load actions.load deflate.conf proxy.conf alias.conf deflate.load proxy_connect.load alias.load dir.conf proxy_http.load auth_basic.load dir.load proxy.load auth_digest.load env.load python.load authn_file.load fcgid.conf reqtimeout.conf authz_default.load fcgid.load reqtimeout.load authz_groupfile.load mime.conf rewrite.load authz_host.load mime.load ruby.load authz_user.load mime_magic.conf setenvif.conf autoindex.conf mime_magic.load setenvif.load autoindex.load mime-xattr.load ssl.conf cgi.load negotiation.conf ssl.load dav_fs.conf negotiation.load status.conf dav_fs.load php5.conf status.load dav.load php5.load suexec.load dav_svn.conf proxy_balancer.conf

  Read the article

• Ubuntu 10.04 preseed unattended install results in faulty partition table

  - by joschi

  I'm currently trying to set up an unattended installation of Ubuntu 10.04 (Lucid Lynx) through preseeding. But whenever I try to create a custom partition scheme, the Debian installer (which Ubuntu is using) produces a faulty partition table. I've taken the partition scheme described in the example preseed file: d-i partman-auto/expert_recipe string \ boot-root :: \ 40 50 100 ext3 \ $primary{ } $bootable{ } \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext3 } \ mountpoint{ /boot } \ . \ 500 10000 1000000000 ext3 \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext3 } \ mountpoint{ / } \ . \ 64 512 300% linux-swap \ method{ swap } format{ } \ . Unfortunately it also produces an incorrect partition table on the disk. The installation process itself is working and the installed system eventually boots and is working, as far as I can tell. But fdisk and cfdisk are still complaining: # fdisk -l /dev/sda Disk /dev/sda: 17.2 GB, 17179869184 bytes 255 heads, 63 sectors/track, 2088 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000a1cdd Device Boot Start End Blocks Id System /dev/sda1 * 1 5 37888 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 5 2089 16736257 5 Extended /dev/sda5 5 2013 16121856 83 Linux /dev/sda6 2013 2089 613376 82 Linux swap / Solaris cfdisk even refuses to start at all: # cfdisk /dev/sda FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder parted on the other hand does not complain about the cylinder boundary of /dev/sda1: # parted /dev/sda p Model: VMware Virtual disk (scsi) Disk /dev/sda: 17.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 39.8MB 38.8MB primary ext4 boot 2 40.9MB 17.2GB 17.1GB extended 5 40.9MB 16.5GB 16.5GB logical ext4 6 16.6GB 17.2GB 628MB logical linux-swap(v1) Since the installed system is working, it shouldn't be a big problem but I'm afraid that this will mean trouble in the future.

  Read the article

• MS Access 2003 - Format a Number with Commas AND Auto-Decimal

  - by Emtucifor

  On a report I have a control which is bound to a column which can have up to 3 decimal places. I want the number to format with commas separating thousands and millions, but I also want the number of decimal places to be automatic, so that if there is no decimal portion then no decimal at all is shown. 1234.567 -> 1,234.567 1234.560 -> 1,234.56 1234.500 -> 1,234.5 1234.000 -> 1,234 General format will give me the auto decimal places but no commas. Standard format gives the comma but is fixed to 2 decimal places. Doing my own =Format(Number, "#,##0.#") leaves the decimal point in and doesn't align properly, with extra space on the right of the number. Do I have to write my own VB function to give the format I want? It seems silly that Access (apparently) can't do this out of the box. This also seems really horrible: =Replace(Replace(Replace(Replace(Replace( _ Format(Number, "#,##0.000") & "x", "0x", ""), "0x", ""), "0x, ""), ".x", ""), "x", "")

  Read the article

• Windows Server 2008 Stops Responding (Hyper-V Role Enabled)

  - by blackf0rk

  The machine is a brand new Dell Precision m6500, Core i5, 8GB RAM. Windows Server 2008 R2 (fully patched) with Hyper-V Role Enabled. Virtualization options in the BIOS are ON, SpeedStep is OFF, couldn't find C1E option in the BIOS to turn it off (I also got the impression that SpeedStep is C1E, but the Intel Product site lists them as separate "features." shrug) The server stops responding without any apparent reason. I've tried testing in multiple scenarios, all of which result in a crash at seemingly random times: With the Server sitting idle, no apps running. Server sitting idle with a Virtual Machine running. Using a BurnInTest application There's no blue screen. It doesn't restart. The screen just sits there. The keyboard backlight still responds and comes on with input, but nothing on the screen changes. There are no errors in the error log. I have to hold down the power button to turn it off. Doing memory tests on bootup results in no errors with the memory. I have a second identical system and the same thing happens there too. I've dual-booted into Windows 7 Profession x64 on this system with no problems. Further testing has shown that the issue is definitely related to Windows Server 2008 R2 and Hyper-V as it appears the crashing does not happen when the services are not running. I've installed all hotfixes relating to this issue (that I could find): 975530, 979444, 979491, 976427 System is still crashing without response.

  Read the article

• ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

  - by ewwhite

  I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

  Read the article

• TCP packets larger than 4 KB don't get a reply from Linux

  - by pts

  I'm running Linux 3.2.51 in a virtual machine (192.168.33.15). I'm sending Ethernet frames to it. I'm writing custom software trying to emulate a TCP peer, the other peer is Linux running in the virtual machine guest. I've noticed that TCP packets larger than about 4 KB are ignored (i.e. dropped without an ACK) by the Linux guest. If I decrease the packet size by 50 bytes, I get an ACK. I'm not sending new payload data until the Linux guest fully ACKs the previous one. I've increased ifconfig eth0 mtu 51000, and ping -c 1 -s 50000 goes through (from guest to my emulator) and the Linux guest gets a reply of the same size. I've also increased sysctl -w net.ipv4.tcp_rmem='70000 87380 87380 and tried with sysctl -w net.ipv4.tcp_mtu_probing=1 (and also =0). There is no IPv3 packet fragmentation, all packets have the DF flag set. It works the other way round: the Linux guest can send TCP packets of 6900 bytes of payload and my emulator understands them. This is very strange to me, because only TCP packets seem to be affected (large ICMP packets go through). Any idea what can be imposing this limit? Any idea how to do debug it in the Linux kernel? See the tcpdump -n -vv output below. tcpdump was run on the Linux guest. The last line is interesting: 4060 bytes of TCP payload is sent to the guest, and it doesn't get any reply packet from the Linux guest for half a minute. 14:59:32.000057 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [S], cksum 0x8da0 (correct), seq 10000000, win 14600, length 0 14:59:32.000086 IP (tos 0x10, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 44) 192.168.33.15.22 > 192.168.33.1.36522: Flags [S.], cksum 0xc37f (incorrect -> 0x5999), seq 1415680476, ack 10000001, win 19920, options [mss 9960], length 0 14:59:32.000218 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0xa752 (correct), ack 1, win 14600, length 0 14:59:32.000948 IP (tos 0x10, ttl 64, id 53777, offset 0, flags [DF], proto TCP (6), length 66) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], cksum 0xc395 (incorrect -> 0xfa01), seq 1:27, ack 1, win 19920, length 26 14:59:32.001575 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0xa738 (correct), ack 27, win 14600, length 0 14:59:32.001585 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 65) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], cksum 0x48d6 (correct), seq 1:26, ack 27, win 14600, length 25 14:59:32.001589 IP (tos 0x10, ttl 64, id 53778, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x9257), ack 26, win 19920, length 0 14:59:32.001680 IP (tos 0x10, ttl 64, id 53779, offset 0, flags [DF], proto TCP (6), length 496) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 27:483, ack 26, win 19920, length 456 14:59:32.001784 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0xa557 (correct), ack 483, win 14600, length 0 14:59:32.006367 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 1136) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 26:1122, ack 483, win 14600, length 1096 14:59:32.044150 IP (tos 0x10, ttl 64, id 53780, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x8c47), ack 1122, win 19920, length 0 14:59:32.045310 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 312) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 1122:1394, ack 483, win 14600, length 272 14:59:32.045322 IP (tos 0x10, ttl 64, id 53781, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x8b37), ack 1394, win 19920, length 0 14:59:32.925726 IP (tos 0x10, ttl 64, id 53782, offset 0, flags [DF], proto TCP (6), length 1112) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], seq 483:1555, ack 1394, win 19920, length 1072 14:59:32.925750 IP (tos 0x10, ttl 64, id 53784, offset 0, flags [DF], proto TCP (6), length 312) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 1555:1827, ack 1394, win 19920, length 272 14:59:32.927131 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x9bcf (correct), ack 1555, win 14600, length 0 14:59:32.927148 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x9abf (correct), ack 1827, win 14600, length 0 14:59:32.932248 IP (tos 0x10, ttl 64, id 53785, offset 0, flags [DF], proto TCP (6), length 56) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], cksum 0xc38b (incorrect -> 0xd247), seq 1827:1843, ack 1394, win 19920, length 16 14:59:32.932366 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x9aaf (correct), ack 1843, win 14600, length 0 14:59:32.964295 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 1394:1458, ack 1843, win 14600, length 64 14:59:32.964310 IP (tos 0x10, ttl 64, id 53786, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x85a7), ack 1458, win 19920, length 0 14:59:32.964561 IP (tos 0x10, ttl 64, id 53787, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 1843:1891, ack 1458, win 19920, length 48 14:59:32.965185 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x9a3f (correct), ack 1891, win 14600, length 0 14:59:32.965196 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 1458:1522, ack 1891, win 14600, length 64 14:59:32.965233 IP (tos 0x10, ttl 64, id 53788, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 1891:1939, ack 1522, win 19920, length 48 14:59:32.965970 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x99cf (correct), ack 1939, win 14600, length 0 14:59:32.965979 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 568) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 1522:2050, ack 1939, win 14600, length 528 14:59:32.966112 IP (tos 0x10, ttl 64, id 53789, offset 0, flags [DF], proto TCP (6), length 520) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 1939:2419, ack 2050, win 19920, length 480 14:59:32.970059 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x95df (correct), ack 2419, win 14600, length 0 14:59:32.970089 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 616) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2050:2626, ack 2419, win 14600, length 576 14:59:32.981159 IP (tos 0x10, ttl 64, id 53790, offset 0, flags [DF], proto TCP (6), length 72) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], cksum 0xc39b (incorrect -> 0xa84f), seq 2419:2451, ack 2626, win 19920, length 32 14:59:32.982347 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x937f (correct), ack 2451, win 14600, length 0 14:59:32.982357 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2626:2690, ack 2451, win 14600, length 64 14:59:32.982401 IP (tos 0x10, ttl 64, id 53791, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 2451:2499, ack 2690, win 19920, length 48 14:59:32.982570 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x930f (correct), ack 2499, win 14600, length 0 14:59:32.982702 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2690:2754, ack 2499, win 14600, length 64 14:59:33.020066 IP (tos 0x10, ttl 64, id 53792, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x7e07), ack 2754, win 19920, length 0 14:59:33.983503 IP (tos 0x10, ttl 64, id 53793, offset 0, flags [DF], proto TCP (6), length 72) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], cksum 0xc39b (incorrect -> 0x2aa7), seq 2499:2531, ack 2754, win 19920, length 32 14:59:33.983810 IP (tos 0x10, ttl 64, id 53794, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 2531:2579, ack 2754, win 19920, length 48 14:59:33.984100 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x92af (correct), ack 2531, win 14600, length 0 14:59:33.984139 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x927f (correct), ack 2579, win 14600, length 0 14:59:34.022914 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 104) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2754:2818, ack 2579, win 14600, length 64 14:59:34.022939 IP (tos 0x10, ttl 64, id 53795, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.15.22 > 192.168.33.1.36522: Flags [.], cksum 0xc37b (incorrect -> 0x7d77), ack 2818, win 19920, length 0 14:59:34.023554 IP (tos 0x10, ttl 64, id 53796, offset 0, flags [DF], proto TCP (6), length 88) 192.168.33.15.22 > 192.168.33.1.36522: Flags [P.], seq 2579:2627, ack 2818, win 19920, length 48 14:59:34.027571 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.33.1.36522 > 192.168.33.15.22: Flags [.], cksum 0x920f (correct), ack 2627, win 14600, length 0 14:59:34.027603 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 4100) 192.168.33.1.36522 > 192.168.33.15.22: Flags [P.], seq 2818:6878, ack 2627, win 14600, length 4060

  Read the article

• Login box not shown on Ubuntu

  - by Alexandre

  I've installed Ubuntu 10.04 (64bit) as a guest OS in VirtualBox, using Windows7 Professional (64bit) as host. After Ubuntu install, I did installed Xfce4 (sudo apt-get install xfce4). Logged in using a Xfce session, and when I logged out, I couldn't see the login box anymore, only the regular gnome background from login screen. Then I restarted the virtual machine, and now I'm not able to see the login box anymore, only the gnome background. Does someone knows how to solve this? Thanks in advance Update: I've tried to use Xubuntu, that comes with Xfce. And I'm facing the same problem. As a common denominator from the two cases, now I see the problem arises after I've updated the system, and then installed curl (via apt-get), zlib (make process), git (make process). But I'm not sure this can be the cause for this ... Update: I isolated the problem. The bad guy is zlib, but I don't have a clue why. In fact, it does crash not only ubuntu and xubuntu, but also Debian (Yes, I've tested all). I'll keep this question in case someone have the same problem, but I think my initial question is not valid anymore.

  Read the article

• Recovering a VHD after resizing it using VBoxManage

  - by tjrobinson

  I am using VirtualBox 4.1.18 and had a virtual machine running Windows 8 RC with a single VHD, which was initially sized at 25GB (too small!). After installing the OS and some applications I ran out of disk space so shut down the guest and then used this command to resize the VHD to 80GB: C:\Program Files\Oracle\VirtualBox> .\VBoxManage.exe modifyhd "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vhd" --resize 81920 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% C:\Program Files\Oracle\VirtualBox> .\VBoxManage.exe showhdinfo "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vhd" UUID: 03fb26e7-d8bb-49b5-8cc2-1dc350750e64 Accessible: yes Logical size: 81920 MBytes Current size on disk: 24954 MBytes Type: normal (base) Storage format: VHD Format variant: dynamic default In use by VMs: Windows 8 RC (UUID: a6e6aa57-2d3a-421b-8042-7aae566e3e0b) Location: D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vhd So far so good. However, when I started the guest up again I got the dreaded: Fatal: No bootable medium found! system halted If I boot into GParted it shows a single 80GB drive as "unallocated". The option to scan for and attempt to repair a filesystem doesn't find anything. I also tried cloning the VHD into a VDI file, just in case that magically fixed it: C:\Program Files\Oracle\VirtualBox> .\VBoxManage.exe clonehd "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vhd" "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vdi" --format VDI 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% Clone hard disk created in format 'VDI'. UUID: baf0c2c4-362f-4f6c-846a-37bb1ffc027b C:\Program Files\Oracle\VirtualBox> .\VBoxManage.exe showhdinfo "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vdi" UUID: baf0c2c4-362f-4f6c-846a-37bb1ffc027b Accessible: yes Logical size: 81920 MBytes Current size on disk: 24798 MBytes Type: normal (base) Storage format: VDI Format variant: dynamic default In use by VMs: Windows 8 RC (UUID: a6e6aa57-2d3a-421b-8042-7aae566e3e0b) Location: D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vdi Is there anything else I could try to recover the drive? No, I don't have a backup :( My host OS is Windows 7 64-bit.

  Read the article

• Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

  - by user8804

  We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

  Read the article

< Previous Page | 944 945 946 947 948 949 950 951 952 953 954 955  | Next Page >