msp files - Page 949 - Developer IT

ImgBurn fails to burn data CD-R disk due to "Layouts do not match" error

- by 0xAether

I have a reoccurring problem with the program ImgBurn. Whenever I try and burn anything to a CD-R using ImgBurn it burns just fine, except for when I go and verify the disk. It tells me that the "Layouts do not match". Windows 7 shows the disk as completely blank. Although, I see on the bottom of the disk it has been written to. I can burn ISO files to DVD-R's just fine. This only seems to happen with CD-R's. The CD-R's I'm using are Memorex Cool Colors 52x CD-R's. I have looked on Google, and it seems like I'm not the only one this happens to. Unfortunately, no one is able to provide an explanation. I have included the log file from the last CD I just burnt. If you need anything else to better diagnose this problem, I will gladly provide it. ; //****************************************\\ ; ImgBurn Version 2.5.7.0 - Log ; Monday, 19 November 2012, 16:11:57 ; \\****************************************// ; ; I 16:04:55 ImgBurn Version 2.5.7.0 started! I 16:04:55 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 16:04:55 Total Physical Memory: 4,156,380 KB - Available: 3,317,144 KB I 16:04:55 Initialising SPTI... I 16:04:55 Searching for SCSI / ATAPI devices... I 16:04:56 -> Drive 1 - Info: Optiarc DVD RW AD-7560S SH03 (D:) (SATA) I 16:04:56 Found 1 DVD±RW/RAM! I 16:05:37 Operation Started! I 16:05:37 Source File: C:\Users\Aaron\Desktop\VMware Workstation 9.iso I 16:05:37 Source File Sectors: 223,057 (MODE1/2048) I 16:05:37 Source File Size: 456,820,736 bytes I 16:05:37 Source File Volume Identifier: VMwareWorksta9 I 16:05:37 Source File Volume Set Identifier: 20121119_2102 I 16:05:37 Source File File System(s): ISO9660, Joliet I 16:05:37 Destination Device: [1:0:0] Optiarc DVD RW AD-7560S SH03 (D:) (SATA) I 16:05:37 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India) I 16:05:37 Destination Media Supported Write Speeds: 10x, 16x, 20x, 24x I 16:05:37 Destination Media Sectors: 359,847 I 16:05:37 Write Mode: CD I 16:05:37 Write Type: SAO I 16:05:37 Write Speed: 6x I 16:05:37 Lock Volume: Yes I 16:05:37 Test Mode: No I 16:05:37 OPC: No I 16:05:37 BURN-Proof: Enabled W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - MODE SENSE: 1,764 KB/s (10x), GET PERFORMANCE: 11,080 KB/s (63x) W 16:05:37 Write Speed Miscompare! - Wanted: 1,058 KB/s (6x), Got: 1,764 KB/s (10x) / 11,080 KB/s (63x) W 16:05:37 The drive only supports writing these discs at 10x, 16x, 20x, 24x. I 16:05:38 Filling Buffer... (80 MB) I 16:05:40 Writing LeadIn... I 16:06:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 223056) I 16:06:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 223056) I 16:11:00 Synchronising Cache... I 16:11:18 Exporting Graph Data... I 16:11:18 Graph Data File: C:\Users\Aaron\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7560S_SH03_MONDAY-NOVEMBER-19-2012_4-05_PM_97m17s06f_6x.ibg I 16:11:18 Export Successfully Completed! I 16:11:18 Operation Successfully Completed! - Duration: 00:05:41 I 16:11:18 Average Write Rate: 1,522 KB/s (10.1x) - Maximum Write Rate: 1,544 KB/s (10.3x) I 16:11:18 Cycling Tray before Verify... W 16:11:23 Waiting for device to become ready... I 16:11:47 Device Ready! E 16:11:47 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0) E 16:11:47 Verify Failed! - Reason: Layouts do not match. I 16:11:57 Close Request Acknowledged I 16:11:57 Closing Down... I 16:11:57 Shutting down SPTI... I 16:11:57 ImgBurn closed!

Read the article

OpenVPN: Connection established but can’t connect to server

- by Maik

I am trying to set up OpenVPN to allow me to connect a number of laptops to my network in a way that allows the laptops to connect to specific computers via HTTP (to e.g. a server management page) and windows shares (to access files) In the test environment my laptops live in a network with a 192.168.1.X address range. The host-network has a 10.66.77.X address range The server hosting the OpenVPN server has address 10.77.10.20. I need to access some application server web pages on this machine, accessible on various ports The server with the windows shares as well as some other web based pages I need to access is on address 10.66.77.20 The config files for server and laptop are attached below. The laptop establishes the VPN connection without problems, but I cannot access any of the machines, even a simple ping fails. Maybe a routing problem? The routing table for the laptop is shown below as well - every idea is appreciated! Thanks! Maik Server config file port 1194 dev tun tls-server ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/projects.crt key /etc/openvpn/keys/projects.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 10.66.77.0 255.255.255.0" keepalive 10 60 inactive 600 route 10.8.0.1 255.255.255.0 user openvpn group openvpn persist-tun persist-key verb 4 client config file dev tun proto udp remote SERVERADDR 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert accountingLaptop.crt key accountingLaptop.key ns-cert-type server comp-lzo verb 3 Resulting routing table on client laptop C:\Documents and Settings\User>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 23 5a 9b 64 9b ...... Atheros AR8132 PCI-E Fast Ethernet Controller - Packet Scheduler Miniport 0x3 ...00 24 2c 35 c9 6b ...... Dell Wireless 1395 WLAN Mini-Card - Packet Sched uler Miniport 0x4 ...00 ff 5e 03 43 9b ...... TAP-Win32 Adapter V9 - Packet Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.129 25 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 1 10.8.0.4 255.255.255.252 10.8.0.6 10.8.0.6 30 10.8.0.6 255.255.255.255 127.0.0.1 127.0.0.1 30 10.66.77.0 255.255.255.0 10.8.0.5 10.8.0.6 1 10.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.129 192.168.1.129 25 192.168.1.129 255.255.255.255 127.0.0.1 127.0.0.1 25 192.168.1.255 255.255.255.255 192.168.1.129 192.168.1.129 25 224.0.0.0 240.0.0.0 10.8.0.6 10.8.0.6 30 224.0.0.0 240.0.0.0 192.168.1.129 192.168.1.129 25 255.255.255.255 255.255.255.255 10.8.0.6 2 1 255.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 1 255.255.255.255 255.255.255.255 192.168.1.129 192.168.1.129 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None

Read the article

Locating Rogue Perl Script

- by Gary Garside

I've been trying to source the location of a perl script which is causing havoc on a server which i control. I'm also trying to find out exactly how this script was installed on the server - my best guess is through a wordpress exploit. The server is a basic web setup running Ubuntu 9.04, Apache and MySQL. I use IPTables for firewall, the site runs around 20 sites and the load never really creeps above 0.7. From what i can see the script is making outbound connection to other servers (most likely trying to brute force entry). Here is a top dump of one of the processes: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22569 www-data 20 0 22784 3216 780 R 100 0.2 47:00.60 perl The command the process is running is /usr/sbin/sshd . I've tried to find an exact file name but im having no luck... i've ran a lsof -p PID and here is the output: COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME perl 22569 www-data cwd DIR 8,6 4096 2 / perl 22569 www-data rtd DIR 8,6 4096 2 / perl 22569 www-data txt REG 8,6 10336 162220 /usr/bin/perl perl 22569 www-data mem REG 8,6 26936 170219 /usr/lib/perl/5.10.0/auto/Socket/Socket.so perl 22569 www-data mem REG 8,6 22808 170214 /usr/lib/perl/5.10.0/auto/IO/IO.so perl 22569 www-data mem REG 8,6 39112 145112 /lib/libcrypt-2.9.so perl 22569 www-data mem REG 8,6 1502512 145124 /lib/libc-2.9.so perl 22569 www-data mem REG 8,6 130151 145113 /lib/libpthread-2.9.so perl 22569 www-data mem REG 8,6 542928 145122 /lib/libm-2.9.so perl 22569 www-data mem REG 8,6 14608 145125 /lib/libdl-2.9.so perl 22569 www-data mem REG 8,6 1503704 162222 /usr/lib/libperl.so.5.10.0 perl 22569 www-data mem REG 8,6 135680 145116 /lib/ld-2.9.so perl 22569 www-data 0r FIFO 0,6 157216 pipe perl 22569 www-data 1w FIFO 0,6 197642 pipe perl 22569 www-data 2w FIFO 0,6 197642 pipe perl 22569 www-data 3w FIFO 0,6 197642 pipe perl 22569 www-data 4u IPv4 383991 TCP outsidesoftware.com:56869->server12.34.56.78.live-servers.net:www (ESTABLISHED) My gut feeling is outsidesoftware.com is also under attacK? Or possibly being used as a tunnel. I've managed to find a number of rouge files in /tmp and /var/tmp, here is a brief output of one of these files: #!/usr/bin/perl # this spreader is coded by xdh # xdh@xxxxxxxxxxx # only for testing... my @nickname = ("vn"); my $nick = $nickname[rand scalar @nickname]; my $ircname = $nickname[rand scalar @nickname]; #system("kill -9 `ps ax |grep httpdse |grep -v grep|awk '{print $1;}'`"); my $processo = '/usr/sbin/sshd'; The full file contents can be viewed here: http://pastebin.com/yenFRrGP Im trying to achieve a couple of things here... Firstly i need to stop these processes from running. Either by disabling outbound SSH or any IP Tables rules etc... these scripts have been running for around 36 hours now and my main concern is to stop these things running and respawning by themselves. Secondly i need to try and source where and how these scripts have been installed. If anybody has any advise on what to look for in access logs or anything else i would be really grateful. Thanks in advance

Read the article

Ubuntu: Failure to login with multiple video adapters

- by tsilb

Forgive my ignorance, for I am a complete linux noob. I have a computer with three video cards and six monitors. Works great on Windows. Trying to get it to run Ubuntu as well. It loads fine when I have it configured to run on one adapter; detects both screens, runs ok. But I want to turn the other 4 monitors on and run the whole thing as one extended desktop (one session, etc). So I downloaded and installed the newest ATI driver for Linux, which seems to work, kinda. I ran this to set up the screens: aticonfig --adapter=all --initial -f Now when I boot, Ubuntu seems to turn on all the screens (3 viewports, each with two cloned displays from what I can tell). When I enter my login info OR move the mouse off the main screen, the screens freeze and the kbd/ms become unresponsive. aticonfig generated xorg.conf included below. Have tried the following: aticonfig -initial -f - works, but only detects the primary adapter and 2 screens aticccle - Tells me I have to reboot after enabling the other cards. Then goes into above described freezing state. aticonfig --adapter=all --initial -f - see above Manually editing xorg.conf file with my limited knowledge - Was able to get two adapters running, but only the second adapter initialized while the primary stopped at the Ubuntu boot screen. Was unable to see the login prompt. Froze after I logged in blindly (was able to hear the login sound). Using generic "radeon" driver instead of ATI Proprietary driver with the above init attempts Toggling xinerama Various combinations of the above Hardware: Intel Core 2 Quad q6600 8GB DDR2 (3x) ATI Radeon HD 4680 5 monitors (21W, 21W, 22W Portrait, 22W Portrait, 19")and an HDTV (26"W, HDMI) in a horizontal arrangement I know next to nothing about Linux/Ubuntu aside from basic filesystem navigation, editing text files, and accessing my local and networked Windows stores and shares. Basically this is the most advanced thing I've had to do. I installed today. Please advise how to make this configuration work. my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[2]-0" RightOf "aticonfig-Screen[1]-0" Option "RenderAccel" "true" Option "AllowGLXWithComposite" "true" EndSection Section "Files" EndSection Section "Module" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[2]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[2]-0" Driver "fglrx" BusID "PCI:4:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[2]-0" Device "aticonfig-Device[2]-0" Monitor "aticonfig-Monitor[2]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

Read the article

Magento installation problem on Nginx in Windows

- by Nithin

I am trying to install magento locally using nginx as the web server instead of Apache. I copied the magento folder to the html directory. When i try to call the magento folder, I get the 404 not found error. I am able to access other php files setup in the html folder and have PHP installed. Here is my config file: #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; server { listen 8080; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; location / { root html; index index.html index.htm index.php; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; allow all; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME c:/nginx/html/$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} } How do I fix this? This is what I found in the error.log file : 2011/09/06 12:22:35 [error] 5632#0: *1 "/cygdrive/c/nginx/html/magento/index.php/install/index.html" is not found (20: Not a directory), client: 127.0.0.1, server: localhost, request: "GET /magento/index.php/install/ HTTP/1.1", host: "localhost:8080"

Read the article

IIS7 web farm - local or shared content?

- by rbeier

We're setting up an IIS7 web farm with two servers. Should each server have its own local copy of the content, or should they pull content directly from a UNC share? What are the pros and cons of each approach? We currently have a single live server WEB1, with content stored locally on a separate partition. A job periodically syncs WEB1 to a standby server WEB2, using robocopy for content and msdeploy for config. If WEB1 goes down, Nagios notifies us, and we manually run a script to move the IP addresses to WEB2's network interface. Both servers are actually VMs running on separate VMWare ESX 4 hosts. The servers are domain-joined. We have around 50-60 live sites on WEB1 - mostly ASP.NET, with a few that are just static HTML. Most are low-traffic "microsites". A few have moderate traffic, but none are massive. We'd like to change this so both WEB1 and WEB2 are actively serving content. This is mainly for reliability - if WEB1 goes down, we don't want to have to manually intervene to fail things over. Spreading the load is also nice, but the load is not high enough right now for us to need this. We're planning to configure our firewall to balance traffic across the two servers. It will detect when a server goes down and will send all the traffic to the remaining live server. We're planning to use sticky sessions for now... eventually we may move to SQL Server session state and stateless load balancing. But we need a way for the servers to share content. We were originally planning to move all the content to a UNC share. Our storage provider says they can set up a highly available SMB share for us. So if we go the UNC route, the storage shouldn't be a single point of failure. But we're wondering about the downsides to this approach: We'll need to change the physical paths for each site and virtual directory. There are also some projects that have absolute paths in their web.config files - we'll have to update those as well. We'll need to create a domain user for the web servers to access the share, and grant that user appropriate permissions. I haven't looked into this yet - I'm not sure if the application pool identity needs to be changed to this user, or if there's another way to tell IIS to use this account when connecting to the share. Sites will no longer be able to access their content if there's ever an Active Directory problem. In general, it just seems a lot more complicated, with more moving parts that could break. Our storage provider would create a volume for us on their redundant SAN. If I understand correctly, this SAN volume would be mounted on a VM running in their redundant VMWare environment; this VM would then expose the SMB share to our web servers. On the other hand, a benefit of the shared content approach is that we'd only need to deploy code to one place, and there would never be a temporary inconsistency between multiple copies of the content. This thread is pretty interesting, though some of these people are working at a much larger scale. I've just been discussing content so far, but we also need to think about configuration. I don't know if we can just use DFS replication for the applicationHost.config and other files, or if it's best to use the shared configuration feature with the config on a UNC share. What do you think? Thanks for your help, Richard

Read the article

nginx: How can I set proxy_* directives only for matching URIs?

- by Artem Russakovskii

I've been at this for hours and I can't figure out a clean solution. Basically, I have an nginx proxy setup, which works really well, but I'd like to handle a few urls more manually. Specifically, there are 2-3 locations for which I'd like to set proxy_ignore_headers to Set-Cookie to force nginx to cache them (nginx doesn't cache responses with Set-Cookie as per http://wiki.nginx.org/HttpProxyModule#proxy_ignore_headers). So for these locations, all I'd like to do is set proxy_ignore_headers Set-Cookie; I've tried everything I could think of outside of setting up and duplicating every config value, but nothing works. I tried: Nesting location directives, hoping the inner location which matches on my files would just set this value and inherit the rest, but that wasn't the case - it seemed to ignore anything set in the outer location, most notably proxy_pass and I end up with a 404). Specifying the proxy_cache_valid directive in an if block that matches on $request_uri, but nginx complains that it's not allowed ("proxy_cache_valid" directive is not allowed here). Specifying a variable equal to "Set-Cookie" in an if block, and then trying to set proxy_cache_valid to that variable later, but nginx isn't allowing variables for this case and throws up. It should be so simple - modifying/appending a single directive for some requests, and yet I haven't been able to make nginx do that. What am I missing here? Is there at least a way to wrap common directives in a reusable block and have multiple location blocks refer to it, after adding their own unique bits? Thank you. Just for reference, the main location / block is included below, together with my failed proxy_ignore_headers directive for a specific URI. location / { # Setup var defaults set $no_cache ""; # If non GET/HEAD, don't cache & mark user as uncacheable for 1 second via cookie if ($request_method !~ ^(GET|HEAD)$) { set $no_cache "1"; } if ($http_user_agent ~* '(iphone|ipod|ipad|aspen|incognito|webmate|android|dream|cupcake|froyo|blackberry|webos|s8000|bada)') { set $mobile_request '1'; set $no_cache "1"; } # feed crawlers, don't want these to get stuck with a cached version, especially if it caches a 302 back to themselves (infinite loop) if ($http_user_agent ~* '(FeedBurner|FeedValidator|MediafedMetrics)') { set $no_cache "1"; } # Drop no cache cookie if need be # (for some reason, add_header fails if included in prior if-block) if ($no_cache = "1") { add_header Set-Cookie "_mcnc=1; Max-Age=17; Path=/"; add_header X-Microcachable "0"; } # Bypass cache if no-cache cookie is set, these are absolutely critical for Wordpress installations that don't use JS comments if ($http_cookie ~* "(_mcnc|comment_author_|wordpress_(?!test_cookie)|wp-postpass_)") { set $no_cache "1"; } if ($request_uri ~* wpsf-(img|js)\.php) { proxy_ignore_headers Set-Cookie; } # Bypass cache if flag is set proxy_no_cache $no_cache; proxy_cache_bypass $no_cache; # under no circumstances should there ever be a retry of a POST request, or any other request for that matter proxy_next_upstream off; proxy_read_timeout 86400s; # Point nginx to the real app/web server proxy_pass http://localhost; # Set cache zone proxy_cache microcache; # Set cache key to include identifying components proxy_cache_key $scheme$host$request_method$request_uri$mobile_request; # Only cache valid HTTP 200 responses for this long proxy_cache_valid 200 15s; #proxy_cache_min_uses 3; # Serve from cache if currently refreshing proxy_cache_use_stale updating timeout; # Send appropriate headers through proxy_set_header Host $host; # no need for this proxy_set_header X-Real-IP $remote_addr; # no need for this proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; # Set files larger than 1M to stream rather than cache proxy_max_temp_file_size 1M; access_log /var/log/nginx/androidpolice-microcache.log custom; }

Read the article

Internal drives vs USB-3 with external SSD or eSata with External SSD

- by normstorm

I have a need to carry VMWare Virtual Machines with me for work. These are very large files (each VM is 20GB or more) and I carry around about 40 to 50 VM's to simulate different software configurations for different client needs. Key: they won't fit on the internal hard drive of my current laptop. I currently execute the VM's from an external 7200RPM 2.5" USB-2 drive. I keep copies of the VM's on other 5400 external USB-2 drives. The VM's work from this drive, but they are slow, costing me much time and frustration. It can take upwards of 30 minutes just to make a copy of one of the VM's. They can take upwards of 10-15 minutes to fully launch and then they operate sluggishly. I am buying a new laptop (Core I7, 8GB RAM and other high-end specs). I intend to buy an SSD for the O/S volume (C:). This SSD will not be large enough to hold the VM's. I have always wanted a second internal hard drive to operate the VM's. To have two hard drives, though, I am finding that I will have to go to a 17" laptop which would be bulky/heavy. I am instead considering purchasing a 15" laptop with either an eSATA port or USB-3 ports and then purchasing two external drives. One of the drives might be an external SSD (maybe OCX brand) for operating the VM's and the other a 7400RPM 1TB hard drive for carrying around the VM's not currently in use. The question is which options would give me the biggest bang for the buck and the weight: 1) 2nd Internal SSD hard drive. This would mean buying a 17" laptop with two drive "bays". The first bay would hold an SSD drive for the C: drive. I would leave the first bay empty from the manufacture and then purchase/install an aftermarket SSD drive. This second SSD drive would have to be very large (256 GB), which would be expensive. I would still also need another external hard drive for carrying around the VM's not in use. 2) 2nd internal hard drive - 7400 RPM. Again, a 17" laptop would be required, but there are models available with on SSD drive for the C: drive and a second 7200 RPM hard drives. The second drive could probably be large enough to hold the VM's in use as well as those not in use. But would it be fast enough to drive the VM's? 3) USB-3 with External SSD. I could buy a 15" laptop with an SSD drive for the C: drive and a second hard drive for general files. I would operate the VM's from an external USB-3 SSD drive and have a third USB-3 external 7200 RPM drive for holding the VM's not in use. 4) eSATA with External SSD. Ditto, just eSATA instead of USB-3 5) USB-3 with External 7400 RPM drive. Ditto, but the drive running the VM's would be USB-3 attached 7400 RPM drives rather than SSD. 6) eSATA with External 7400 RPM drive. Dittor, but the drive running the VM's would be eSATA attached 7400 RPM drives rather than SSD. Any thoughts on this and any creative solutions?

Read the article

mono 3.0.2 + xsp + lighttpd delivers empty page

- by Nefal Warnets

I needed MVC 4 (and basic .NET 4.5) support so I downloaded mono 3.0.2 and deployed it on an lighttpd 1.4.28 installation, together with xsp-2.10.2 (was the latest I could find). After going through the config tutorials I managed to get the fastcgi server to spawn, but all pages are served empty. even if I go to nonexistant urls or direct .aspx files I get an empty HTTP 200 response. The log file on Debug shows nothing suspicious. Here is the log: [2012-12-12 15:15:38Z] Debug Accepting an incoming connection. [2012-12-12 15:15:38Z] Debug Record received. (Type: BeginRequest, ID: 1, Length: 8) [2012-12-12 15:15:38Z] Debug Record received. (Type: Params, ID: 1, Length: 801) [2012-12-12 15:15:38Z] Debug Record received. (Type: Params, ID: 1, Length: 0) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_SOFTWARE = lighttpd/1.4.28) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_NAME = xxxx) [2012-12-12 15:15:38Z] Debug Read parameter. (GATEWAY_INTERFACE = CGI/1.1) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_PORT = 80) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_ADDR = xxxx) [2012-12-12 15:15:38Z] Debug Read parameter. (REMOTE_PORT = xxx) [2012-12-12 15:15:38Z] Debug Read parameter. (REMOTE_ADDR = xxxx) [2012-12-12 15:15:38Z] Debug Read parameter. (SCRIPT_NAME = /ViewPage1.aspx) [2012-12-12 15:15:38Z] Debug Read parameter. (PATH_INFO = ) [2012-12-12 15:15:38Z] Debug Read parameter. (SCRIPT_FILENAME = /data/htdocs/ViewPage1.aspx) [2012-12-12 15:15:38Z] Debug Read parameter. (DOCUMENT_ROOT = /data/htdocs) [2012-12-12 15:15:38Z] Debug Read parameter. (REQUEST_URI = /ViewPage1.aspx) [2012-12-12 15:15:38Z] Debug Read parameter. (QUERY_STRING = ) [2012-12-12 15:15:38Z] Debug Read parameter. (REQUEST_METHOD = GET) [2012-12-12 15:15:38Z] Debug Read parameter. (REDIRECT_STATUS = 200) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_PROTOCOL = HTTP/1.1) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_HOST = xxxxx) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_CONNECTION = keep-alive) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_CACHE_CONTROL = max-age=0) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_USER_AGENT = Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.95 Safari/537.11) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_ACCEPT = text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_ACCEPT_ENCODING = gzip,deflate,sdch) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_ACCEPT_LANGUAGE = en-US,en;q=0.8) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_ACCEPT_CHARSET = ISO-8859-1,utf-8;q=0.7,*;q=0.3) [2012-12-12 15:15:38Z] Debug Record received. (Type: StandardInput, ID: 1, Length: 0) [2012-12-12 15:15:38Z] Debug Record sent. (Type: EndRequest, ID: 1, Length: 8) lighttpd config: server.modules += ( "mod_fastcgi" ) include "conf.d/mono.conf" $HTTP["host"] !~ "^vdn\." { $HTTP["url"] !~ "\.(jpg|gif|png|js|css|swf|ico|jpeg|mp4|flv|zip|7z|rar|psd|pdf|html|htm)$" { fastcgi.server += ( "" => (( "socket" => mono_shared_dir + "fastcgi-mono-server", "bin-path" => mono_fastcgi_server, "bin-environment" => ( "PATH" => mono_dir + "bin:/bin:/usr/bin:", "LD_LIBRARY_PATH" => mono_dir + "lib:", "MONO_SHARED_DIR" => mono_shared_dir, "MONO_FCGI_LOGLEVELS" => "Debug", "MONO_FCGI_LOGFILE" => mono_shared_dir + "fastcgi.log", "MONO_FCGI_ROOT" => mono_fcgi_root, "MONO_FCGI_APPLICATIONS" => mono_fcgi_applications ), "max-procs" => 1, "check-local" => "disable" )) ) } } the referenced mono.conf index-file.names += ( "index.aspx", "default.aspx" ) var.mono_dir = "/usr/" var.mono_shared_dir = "/tmp/" var.mono_fastcgi_server = mono_dir + "bin/" + "fastcgi-mono-server4" var.mono_fcgi_root = server.document-root var.mono_fcgi_applications = "/:." The document root for this server is /data/htdocs. The asp.net files reside there. lighttpd error logs show nothing. Every help is greatly appreciated!

Read the article

How to configure emacs by using this file?

- by Andy Leman

From http://public.halogen-dg.com/browser/alex-emacs-settings/.emacs?rev=1346 I got: (setq load-path (cons "/home/alex/.emacs.d/" load-path)) (setq load-path (cons "/home/alex/.emacs.d/configs/" load-path)) (defconst emacs-config-dir "~/.emacs.d/configs/" "") (defun load-cfg-files (filelist) (dolist (file filelist) (load (expand-file-name (concat emacs-config-dir file))) (message "Loaded config file:%s" file) )) (load-cfg-files '("cfg_initsplit" "cfg_variables_and_faces" "cfg_keybindings" "cfg_site_gentoo" "cfg_conf-mode" "cfg_mail-mode" "cfg_region_hooks" "cfg_apache-mode" "cfg_crontab-mode" "cfg_gnuserv" "cfg_subversion" "cfg_css-mode" "cfg_php-mode" "cfg_tramp" "cfg_killbuffer" "cfg_color-theme" "cfg_uniquify" "cfg_tabbar" "cfg_python" "cfg_ack" "cfg_scpaste" "cfg_ido-mode" "cfg_javascript" "cfg_ange_ftp" "cfg_font-lock" "cfg_default_face" "cfg_ecb" "cfg_browser" "cfg_orgmode" ; "cfg_gnus" ; "cfg_cyrillic" )) ; enable disabled advanced features (put 'downcase-region 'disabled nil) (put 'scroll-left 'disabled nil) (put 'upcase-region 'disabled nil) ; narrow cursor ;(setq-default cursor-type 'hbar) (cua-mode) ; highlight current line (global-hl-line-mode 1) ; AV: non-aggressive scrolling (setq scroll-conservatively 100) (setq scroll-preserve-screen-position 't) (setq scroll-margin 0) (custom-set-variables ;; custom-set-variables was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(ange-ftp-passive-host-alist (quote (("redbus2.chalkface.com" . "on") ("zope.halogen-dg.com" . "on") ("85.119.217.50" . "on")))) '(blink-cursor-mode nil) '(browse-url-browser-function (quote browse-url-firefox)) '(browse-url-new-window-flag t) '(buffers-menu-max-size 30) '(buffers-menu-show-directories t) '(buffers-menu-show-status nil) '(case-fold-search t) '(column-number-mode t) '(cua-enable-cua-keys nil) '(user-mail-address "[email protected]") '(cua-mode t nil (cua-base)) '(current-language-environment "UTF-8") '(file-name-shadow-mode t) '(fill-column 79) '(grep-command "grep --color=never -nHr -e * | grep -v .svn --color=never") '(grep-use-null-device nil) '(inhibit-startup-screen t) '(initial-frame-alist (quote ((width . 80) (height . 40)))) '(initsplit-customizations-alist (quote (("tabbar" "configs/cfg_tabbar.el" t) ("ecb" "configs/cfg_ecb.el" t) ("ange\\-ftp" "configs/cfg_ange_ftp.el" t) ("planner" "configs/cfg_planner.el" t) ("dired" "configs/cfg_dired.el" t) ("font\\-lock" "configs/cfg_font-lock.el" t) ("speedbar" "configs/cfg_ecb.el" t) ("muse" "configs/cfg_muse.el" t) ("tramp" "configs/cfg_tramp.el" t) ("uniquify" "configs/cfg_uniquify.el" t) ("default" "configs/cfg_font-lock.el" t) ("ido" "configs/cfg_ido-mode.el" t) ("org" "configs/cfg_orgmode.el" t) ("gnus" "configs/cfg_gnus.el" t) ("nnmail" "configs/cfg_gnus.el" t)))) '(ispell-program-name "aspell") '(jabber-account-list (quote (("[email protected]")))) '(jabber-nickname "AVK") '(jabber-password nil) '(jabber-server "halogen-dg.com") '(jabber-username "alex") '(remember-data-file "~/Plans/remember.org") '(safe-local-variable-values (quote ((dtml-top-element . "body")))) '(save-place t nil (saveplace)) '(scroll-bar-mode (quote right)) '(semantic-idle-scheduler-idle-time 432000) '(show-paren-mode t) '(svn-status-hide-unmodified t) '(tool-bar-mode nil nil (tool-bar)) '(transient-mark-mode t) '(truncate-lines f) '(woman-use-own-frame nil)) ; ?? ????? ??????? y ??? n? (fset 'yes-or-no-p 'y-or-n-p) (custom-set-faces ;; custom-set-faces was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(compilation-error ((t (:foreground "tomato" :weight bold)))) '(cursor ((t (:background "red1")))) '(custom-variable-tag ((((class color) (background dark)) (:inherit variable-pitch :foreground "DarkOrange" :weight bold)))) '(hl-line ((t (:background "grey24")))) '(isearch ((t (:background "orange" :foreground "black")))) '(message-cited-text ((((class color) (background dark)) (:foreground "SandyBrown")))) '(message-header-name ((((class color) (background dark)) (:foreground "DarkGrey")))) '(message-header-other ((((class color) (background dark)) (:foreground "LightPink2")))) '(message-header-subject ((((class color) (background dark)) (:foreground "yellow2")))) '(message-separator ((((class color) (background dark)) (:foreground "thistle")))) '(region ((t (:background "brown")))) '(tooltip ((((class color)) (:inherit variable-pitch :background "IndianRed1" :foreground "black"))))) The above is a python emacs configure file. Where should I put it to use it? And, are there any other changes I need to make?

Read the article

Error on installing SVN extension with pecl

- by thedp

Hello, I'm trying to install the following PHP extension: http://php.net/manual/en/book.svn.php But when I do pecl install svn-beta I receive an error message that it can't locate the svn_client.h file. I searched the net but couldn't find any useful reference to this error. Thank you for your help. Installation result: root@myUbuntu:/home/thedp# pecl install svn-beta downloading svn-0.5.1.tgz ... Starting to download svn-0.5.1.tgz (23,563 bytes) .....done: 23,563 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 1. Please provide the prefix of Subversion installation : autodetect 1-1, 'all', 'abort', or Enter to continue: 1. Please provide the prefix of the APR installation used with Subversion : autodetect 1-1, 'all', 'abort', or Enter to continue: building in /var/tmp/pear-build-root/svn-0.5.1 running: /tmp/pear/temp/svn/configure --with-svn --with-svn-apr checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc and cc understand -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 checking for PHP extension directory... /usr/lib/php5/20060613+lfs checking for PHP installed headers prefix... /usr/include/php5 checking for re2c... no configure: WARNING: You will need re2c 0.12.0 or later if you want to regenerate PHP parsers. checking for gawk... no checking for nawk... nawk checking if nawk is broken... no checking for svn support... yes, shared checking for specifying the location of apr for svn... yes, shared checking for svn includes... configure: error: failed to find svn_client.h ERROR: `/tmp/pear/temp/svn/configure --with-svn --with-svn-apr' failed

Read the article

nginx: problem configuring a proxy_pass

- by Ofer Bar

I'm converting a web app from apache to nginx. In apache's httpd.conf I have: ProxyPass /proxy/ http:// ProxyPassReverse /proxy/ http:// The idea is the client send this url: http://web-server-domain/proxy/login-server-addr/loginUrl.php?user=xxx&pass=yyy and the web server calls: http://login-server-addr/loginUrl.php?user=xxx&pass=yyy My nginx.conf is attached below and it is not working. At the moment it looks like it is calling the server, but returning an application error. This seems promising but any attempt to debug this failed! I can't trace any of the calls as nginx refuses to place them in the error file. Also, placing echo statement on the login server did not help either which is weird. The nginx documentation isn't very helpful about this. Any suggestion on how to configure a proxy_pass? Thanks! user nginx; worker_processes 1; #error_log /var/log/nginx/error.log; error_log /var/log/nginx/error.log notice; #error_log /var/log/nginx/error.log info; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; # # The default server # server { rewrite_log on; listen 80; server_name _; #charset koi8-r; #access_log logs/host.access.log main; #root /var/www/live/html; index index.php index.html index.htm; location ~ ^/proxy/(.*$) { #location /proxy/ { # rewrite ^/proxy(.*) http://$1 break; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_buffering off; proxy_pass http://$1; #proxy_pass "http://173.231.134.36/messages_2.7.0/loginUser.php?userID=ofer.fly%40gmail.com&password=y4HTD93vrshMNcy2Qr5ka7ia0xcaa389f4885f59c9"; break; } location / { root /var/www/live/html; #if ( $uri ~ ^/proxy/(.*) ) { # proxy_pass http://$1; # break; #} #try_files $uri $uri/ /index.php; } error_page 404 /404.html; #location = /404.html { # root /usr/share/nginx/html; #} # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { #root html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; #fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; fastcgi_param SCRIPT_FILENAME /var/www/live/html$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # Load config files from the /etc/nginx/conf.d directory include /etc/nginx/conf.d/*.conf; }

Read the article

cron.daily not running at the time it should?

- by Mariano Martinez Peck

My /etc/cron.daily scripts seem to be executing far later from what I understand they should. I am in Ubuntu and anacron is installed. If I do a sudo cat /var/log/syslog | grep cron I get something like: Aug 23 01:17:01 mymachine CRON[25171]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 02:17:01 mymachine CRON[25588]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 03:17:01 mymachine CRON[26026]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 03:25:01 mymachine CRON[30320]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )) Aug 23 04:17:01 mymachine CRON[26363]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 05:17:01 mymachine CRON[26770]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 06:17:01 mymachine CRON[27168]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 07:17:01 mymachine CRON[27547]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 07:30:01 mymachine CRON[2249]: (root) CMD (start -q anacron || :) Aug 23 07:30:02 mymachine anacron[2252]: Anacron 2.3 started on 2014-08-23 Aug 23 07:30:02 mymachine anacron[2252]: Will run job `cron.daily' in 5 min. Aug 23 07:30:02 mymachine anacron[2252]: Jobs will be executed sequentially Aug 23 07:35:02 mymachine anacron[2252]: Job `cron.daily' started As you can see, at 3:25 it tried to do something. But the cron.daily execution started really at 7:35. My /etc/crontab is: # /etc/crontab: system-wide crontab # Unlike any other crontab you don't have to run the `crontab' # command to install the new version when you edit this file # and files in /etc/cron.d. These files also have username fields, # that none of the other crontabs do. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 3 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) # From what I understand, daily scripts are indeed for 3:25. My /etc/anacrontab is: # /etc/anacrontab: configuration file for anacron # See anacron(8) and anacrontab(5) for details. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin HOME=/root LOGNAME=root # These replace cron's entries 1 5 cron.daily run-parts --report /etc/cron.daily 7 10 cron.weekly run-parts --report /etc/cron.weekly @monthly 15 cron.monthly run-parts --report /etc/cron.monthly So...does someone know why my cron started to do something at 3:25 but then really start the jobs at 7:35? Also..as you can see in the log, hourly jobs are being executed at correct time: hour and 17 minutes, which is exactly what I have in /etc/crontab Finally, from the logs, it seems my daily jobs are being actually run by anacron rather than cron? So cron finds nothing to run (at 3:25) and then anacron runs the jobs at 7:35? If true, how can I fix this? Thanks in advance,

Read the article

Apache outputs all urls of a second domain as a subfolder of the primary domain name

- by s_rathbone

Hi all, would anyone be able to possibly give me some guidance.. Basically, i have a 'shared hosting' account with a large internet hosting provider, and my account lets me have multiple seperate domains within this folder structure.(note: not aliased domains and not sub domains). so, my goal is to have 2 domains set up. i have already purchased the two domain names i need: The first domain is the 'primary' domain name for the root folder(eg. www.example1.com) and the second domain name is set for one of its sub folders(eg. www.example2.com is set to the folder www.example1.com/sites/music). The problem is that when apache returns a page of the second domain back to the browser, apache writes the hyperlinks as if it's a sub folder of the first domain ( eg. www.example2.com/index.html. comes out as http://www.example1.com/sites/music/index.html). Now, I have done some reading on this, looking though "Apache: the definitive guide"(o'reilly), and although it was useful, couldn't really find the answer. i'm guessing this issue is most likely an apache setup issue in http.conf, rather than an issue with the hosting company itself (which is why im posting it here) and I have also been to the official documentation for apache site, and i am guessing i might need to use something like the rewritebase directive in htaccess files.. but im really not sure, im more of a java programmer guy, and have been struggling with this for a couple of days. Any guidance would be REALLY appreciated. If it helps, my hosting company is godaddy, and my sites are hosted on linux. My problem was originally with wordpress which i reinstalled a number of times in various ways to correct the problem, but ive just done a test with a very simple static html, and it still has the same issue with relative urls like this: <html> <head></head><body><a href="images/dog.html">Pictures of Dogs</a></body> </html> However, it is fine if i hardcode the urls like this: <html> <head></head><body><a href="http://www.example2.com/images/dog.html">Pictures of Dogs</a></body> </html> Thanks heaps, Steve R NOW FIXED Ok, the problem has now been fixed, and i didn't need to modify any .conf or .htaccess files. The problem was, that when I went to install the second application into a second domain from the godaddy site, one of the setup questions is that it asks you which site you want it installed to. after that it asks for the desired folder path. However, the problem was that the second domain name was already pointing to the correct subfolder of the primary domain. So when I started installing wordpress again and came to the menu to select which site it was for, and it listed only the primary domain as an option, i assumed that this was like a label of "which hosting account?", or "which primary domain will your application will be installed under?" because I already knew that in the next step i was specifiying the folder. In order to correct this, you must make sure that your second domain is added to your domain list so that it will be listed as an option during the installation process. For further details please read tystips.com/archives/52/how2-save-money-host-multiple-wordpress-blogs-on-a-single-godaddy-hosting-account/

Read the article

Cloudformation with Ubuntu throwing errors

- by Sammaye

I have been doing some reading and have come to the understanding that if you wish to use a launchConfig with Ubuntu you will need to install the cfn-init file yourself which I have done: "Properties" : { "KeyName" : { "Ref" : "KeyName" }, "SpotPrice" : "0.05", "ImageId" : { "Fn::FindInMap" : [ "AWSRegionArch2AMI", { "Ref" : "AWS::Region" }, { "Fn::FindInMap" : [ "AWSInstanceType2Arch", { "Ref" : "InstanceType" }, "Arch" ] } ] }, "SecurityGroups" : [ { "Ref" : "InstanceSecurityGroup" } ], "InstanceType" : { "Ref" : "InstanceType" }, "UserData" : { "Fn::Base64" : { "Fn::Join" : ["", [ "#!/bin/bash\n", "apt-get -y install python-setuptools\n", "easy_install https://s3.amazonaws.com/cloudformation-examples/aws-cfn-bootstrap-1.0-6.tar.gz\n", "cfn-init ", " --stack ", { "Ref" : "AWS::StackName" }, " --resource LaunchConfig ", " --configset ALL", " --access-key ", { "Ref" : "WorkerKeys" }, " --secret-key ", {"Fn::GetAtt": ["WorkerKeys", "SecretAccessKey"]}, " --region ", { "Ref" : "AWS::Region" }, " || error_exit 'Failed to run cfn-init'\n" ]]}} But I have a problem with this setup that I cannot seem to get a decent answer to. I keep getting this error in the logs: Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: config-scripts-per-once already ran once Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-per-boot with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-per-instance with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-user with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] cc_scripts_user.py[WARNING]: failed to run-parts in /var/lib/cloud/instance/scripts Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[WARNING]: Traceback (most recent call last):#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/__init__.py", line 117, in run_cc_modules#012 cc.handle(name, run_args, freq=freq)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/__init__.py", line 78, in handle#012 [name, self.cfg, self.cloud, cloudinit.log, args])#012 File "/usr/lib/python2.7/dist-packages/cloudinit/__init__.py", line 326, in sem_and_run#012 func(*args)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/cc_scripts_user.py", line 31, in handle#012 util.runparts(runparts_path)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/util.py", line 223, in runparts#012 raise RuntimeError('runparts: %i failures' % failed)#012RuntimeError: runparts: 1 failures Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[ERROR]: config handling of scripts-user, None, [] failed Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling keys-to-console with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling phone-home with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling final-message with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] cloud-init-cfg[ERROR]: errors running cloud_config [final]: ['scripts-user'] I have absolutely no idea what scripts-user means and Google is not helping much here either. I can, when I ssh into the server, see that it runs the userdata script since I can access cfn-init as a command whereas I cannot in the original AMI the instance is made from. However I have a launchConfig: "Comment" : "Install a simple PHP application", "AWS::CloudFormation::Init" : { "configSets" : { "ALL" : ["WorkerRole"] }, "WorkerRole" : { "files" : { "/etc/cron.d/worker.cron" : { "content" : "*/1 * * * * ubuntu /home/ubuntu/worker_cron.php &> /home/ubuntu/worker.log\n", "mode" : "000644", "owner" : "root", "group" : "root" }, "/home/ubuntu/worker_cron.php" : { "content" : { "Fn::Join" : ["", [ "#!/usr/bin/env php", "<?php", "define('ROOT', dirname(__FILE__));", "const AWS_KEY = \"", { "Ref" : "WorkerKeys" }, "\";", "const AWS_SECRET = \"", { "Fn::GetAtt": ["WorkerKeys", "SecretAccessKey"]}, "\";", "const QUEUE = \"", { "Ref" : "InputQueue" }, "\";", "exec('git clone x '.ROOT.'/worker');", "if(!file_exists(ROOT.'/worker/worker_despatcher.php')){", "echo 'git not downloaded right';", "exit();", "}", "echo 'git downloaded';", "include_once ROOT.'/worker/worker_despatcher.php';" ]]}, "mode" : "000755", "owner" : "ubuntu", "group" : "ubuntu" } } } } Which does not seem to run at all. I have checked for the files existance in my home directory and it's not there. I have checked for the cronjob entry and it's not there either. I cannot, after reading through the documentation, seem to see what's potentially wrong with my code. Any thoughts on why this is not working? Am I missing something blatant?

Read the article

PC: Quick Freeze, then BSOD, then forced reboot, then freezes again

- by cr0z3r

Lately I have been experiencing a weird issue. My PC will hang for a second and then BSOD - it stays there, so I have to reboot. Once Windows starts again and I'm logged in, after 1-10min it freezes again, this time without BSOD. RECAP: 1 second freeze BSOD, hangs there I have to force-reboot Once PC rebooted, I log back into Windows second freeze between a 1-10min range, no BSOD (alternatively, I get a freeze with a constant sound/noise, no BSOD) I contacted my PC provider, who told me my graphics-card might be flawed (Quadro 4000), so I used a Quadro 2000 that they lend me. The issue still occurred. The issue now seemed to belong to a flawed RAM module. Following my provider's steps, I removed all but the first from the left column and kept using my PC for a week or so without any issues. I then added the bottom-right module, and so on, until all modules were back inside - I had no problems. Now it seemed that a simple take-out-put-back-in of the RAM modules had fixed the issue. However, after a few months, the issue was back. I redid all the RAM-swapping I had done before, and concluded that the lower-right module was flawed. My provider changed it for another, and everything was great until now. My PC froze again for barely a second, hanged on a BSOD, I rebooted it, logged-in to Windows to get a freeze (without BSOD or reboot) 40 seconds later. Something worth noting, is that every time I reboot after the BSOD, it is something within Chrome that freezes my PC (e.g. this time I clicked the "restore" button as Chrome mentioned it had exited unexpectedly - from the previous freeze obviously - and it instantly froze). Finally, the Event Viewer lists 2 critical events in the past hour as "ID: 41, Type: Kernel-Power". PC-Specs: http://i.imgur.com/VZpbr.jpg Previous Dump-files: https://dl.dropbox.com/u/716600/DumpFiles_08_2012.zip I would like to thank anybody in advance for your help. You're great. UPDATE 1: I realized that I did not mention an awkward fact about this issue. After I have gotten the 1-sec freeze followed by a BSOD, after I rebooted because the BSOD hanged, and after I logged back in to get another (this time, eternal) freeze and rebooted once again, the PC does not boot back up. The power-light is on, but my monitor says "no signal", as if the PC wouldn't really be turned on. This truly seems a like a power-related issue, doesn't it? UPDATE 2: I just got a freeze, but without BSOD. My screen froze (while on Chrome, which is starting to seem suspicious to me) with an ongoing sound/noise. I had to force-reboot my PC. I would say this is a graphics-card issue, but this issue also happened when I was using the Quadro 2000 from my provider. UPDATE 3: I just got a BSOD while trying to render something (quite heavy, actually) in 3ds Max 2012. I left the BSOD "running", as it said it was writing dump files to disk. However, the percentage number stayed at 0, so after 15 minutes I force-rebooted. I then used the software WhoCrashed (thank you Dave) which reported the following from the C:\Windows\Memory.dmp file: On Thu 22.11.2012 22:13:45 GMT your computer crashed crash dump file: C:\Windows\memory.dmp uptime: 01:05:27 This was probably caused by the following module: Unknown () Bugcheck code: 0x124 (0x0, 0xFFFFFA80275AC028, 0xF200001F, 0x100B2) Error: WHEA_UNCORRECTABLE_ERROR Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue. A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: Unknown . Google query: Unknown WHEA_UNCORRECTABLE_ERROR

Read the article

Prevent auto mounting Android sdcard under Linux Mint

- by BullShark

I recently obtained an older Android phone, so that I could test Android Apps on it. I've needed it because I have a Nexus 7 but not older Android versions, hardware, etc. to test on. I'm having a problem with it under Linux Mint with Cinnamon. When I plug the phone in, or remove and plug the sdcard from the phone back to it while the phone is plugged in, Linux automatically mounts the sdcard. This is a problem because once it is mounted under Linux, it dismounts from the phone running Android 2.3.5, and I can no longer test Android Apps I write that require the sdcard to be present, writable. I went to Menu System Tools System Settings System Details Removable Media, and it brings up this window. I have changed the settings to always "Ask what to do" on "Select how media should be handled". However, the sdcard still gets mounted and then I am asked how I want to open these files (media players, photo importers, file browser, etc.). If I click the checkbox for "Never prompt or start programs on media insertion", then the sdcard is mounted, and I am not asked how to open these files. Eject is just a noob word for Ubuntu users that means umount (unmount) like "Adminstrator" is another ubuntu noob word for the root user. And if I unmount the sdcard, the phone doesn't recognize it again until I take the sdcard out and plug it back in. The phone sees it for a brief moment until Linux Mint takes it over. There are 2 possible solutions and maybe more: 1) Prevent Linux from automounting sdcards some how 2) Tell Android not to allow the computer it is plugged into to take over the sdcard, HOW? Edit: I found out how to prevent the sdcard from being automatically mounted: Now it gets recognized by Linux: bullshark@beastlinux ~ $ dmesg | tail -n 25 [597212.218323] sd 21:0:0:0: [sde] Attached SCSI removable disk [597212.218639] sr 21:0:0:1: Attached scsi CD-ROM sr2 [597212.218910] sr 21:0:0:1: Attached scsi generic sg7 type 5 [597217.139373] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597217.140726] sd 21:0:0:0: [sde] No Caching mode page present [597217.140735] sd 21:0:0:0: [sde] Assuming drive cache: write through [597217.143595] sd 21:0:0:0: [sde] No Caching mode page present [597217.143602] sd 21:0:0:0: [sde] Assuming drive cache: write through [597217.152240] sde: sde1 [597389.751008] 4:2:1: cannot get freq at ep 0x84 [597390.238742] 4:2:1: cannot get freq at ep 0x84 [597624.903132] sde: detected capacity change from 1977614336 to 0 [597637.677763] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597637.679616] sd 21:0:0:0: [sde] No Caching mode page present [597637.679626] sd 21:0:0:0: [sde] Assuming drive cache: write through [597637.682508] sd 21:0:0:0: [sde] No Caching mode page present [597637.682515] sd 21:0:0:0: [sde] Assuming drive cache: write through [597637.692758] sde: sde1 [597661.857979] sde: detected capacity change from 1977614336 to 0 [597688.775455] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597688.776814] sd 21:0:0:0: [sde] No Caching mode page present [597688.776823] sd 21:0:0:0: [sde] Assuming drive cache: write through [597688.780055] sd 21:0:0:0: [sde] No Caching mode page present [597688.780062] sd 21:0:0:0: [sde] Assuming drive cache: write through [597688.788639] sde: sde1 bullshark@beastlinux ~ $ However, the phone still unmounts the sdcard upon being detected by Linux. Linux detects but does not mount, and a few seconds later: Edit #2 (Solution): I solved this one by changing the usb connection type (was usb mass storage) :

Read the article

Building nginx 1.0.4 on Amazon EC2 micro - perl and python problems

- by digitaltoast

I'd like to run nginx as a reverse proxy with apache2 on my EC2 micro instance. yum install nginx gives me nginx-0.8.53-1.2.amzn1.x86_64.rpm The current nginx is 1.0.4 I found and followed this guide: http://kdn2.info/2011/05/install-nginx-on-amazon-ec2/ It works fine up to and including "make". When I get to checkinstall --fstrans=no I get ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. make[1]: Leaving directory `/root/src/nginx-1.0.4' ======================== Installation successful ========================== Copying documentation directory... ./ ./CHANGES ./LICENSE ./README cp: cannot stat `//var/tmp/gRWoVgIcdbmjfTjoVGBM/newfiles.tmp': No such file or directory Copying files to the temporary directory...OK Striping ELF binaries and libraries...OK Compressing man pages...OK Building file list...OK Building RPM package... FAILED! *** Failed to build the package ...and the logfile is full of: Building target platforms: x86_64 Building for target x86_64 Processing files: nginx-1.0.4-1.x86_64 error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr/doc There IS /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/ but no /usr Following further down the page, it says: "If we want to use, for example, PHP 5.2 we can download PHP and Nginx compatible with Amazon Kernel(Xen Kernel) from the CentosALT Repository." So I install the two repositories, but when I yum install http://centos.alt.ru/pub/nginx/1.0/RPMS/x86_64/nginx-stable-1.0.4-1.el5.x86_64.rpm I get Error: Package: nginx-stable-1.0.4-1.el5.x86_64 (/nginx-stable-1.0.4-1.el5.x86_64) Requires: perl(:MODULE_COMPAT_5.8.8) You could try using --skip-broken to work around the problem but that doesn't fix it. When I do yum update, I get --> Finished Dependency Resolution Error: Package: python-distribute-0.6.19-10.1.x86_64 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 Error: Package: python-distribute-0.6.19-10.1.i586 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 I've tried everything - yum clean all and various other suggestions found on other sites. If anyone has any suggestions or a known package of the current 1.04 nginx working on EC2 Micro (Linux ip-10-56-63-85 2.6.35.11-83.9.amzn1.x86_64 #1 SMP Sat Feb 19 23:42:04 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux - which I think is RHEL 5?) then I'd be grateful. Incidentally, does this repolist look right? repo id repo name status CentALT CentALT Packages for Enterprise Linux 5 - x86_64 enabled: 112+157 amzn-main amzn-main-Base enabled: 2,706 amzn-main-debuginfo amzn-main-debuginfo disabled amzn-main-nosrc amzn-main-nosrc disabled amzn-updates amzn-updates-Base enabled: 328 amzn-updates-debuginfo amzn-updates-debuginfo disabled amzn-updates-nosrc amzn-updates-nosrc disabled devel_languages_python Python and Python Modules (SLE_10) enabled: 1,452+768 epel Extra Packages for Enterprise Linux 5 - x86_64 enabled: 5,892+604 epel-debuginfo Extra Packages for Enterprise Linux 5 - x86_64 - Debug disabled epel-source Extra Packages for Enterprise Linux 5 - x86_64 - Source disabled epel-testing Extra Packages for Enterprise Linux 5 - Testing - x86_64 disabled epel-testing-debuginfo Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Debug disabled epel-testing-source Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Source disabled s3tools Tools for managing Amazon S3 - Simple Storage Service (RHEL_6) enabled: 2+1 repolist: 10,492

Read the article

Scenarios for Bazaar and SVN interaction

- by Adam Badura

At our company we are using SVN repository. I'm doing programming from both work (main place) and home (mostly experiments and refactoring). Those are two different machines, in different networks and almost never turned on at the same time (after all I'm either at work or at home...) I wanted to give a chance to some distributed version control system and solve some of the issues associated with SVN based process and having two machines. From git, Mercurial and Bazaar I chose to start with Bazaar since it claims that it is designed do be used by human beings. Its my first time with distributed system and having nice and easy user interface was important for me. Features I wanted to achieve were: Being able to update from SVN repository and commit to it. Being able to commit locally steps of my work on a task. Being able to have few separate tasks at the same time in their own local branches. Being able to share those branches between my work and home computer. As a means of transport between work and home computer I wanted to use a pen-drive. Company server will not work since I may not instal there anything. Neither will work a web service repository as I may not upload source code to web (especially if it would be public which seems to be a common case in free web services). This transport should be Bazaar-based (or what ever else I will end with) so it can be done more or less automatically but manual copying and pasting some folders or generating patch files (providing they would work - I have bad experience with patch files in SVN) would work as well if there is no better solution. Yet the pen-drive should only be used for transportation. I do not want to edit or build there. I tried following Bazaar guidelines for integration with SVN. But I failed. I tried both bzr svn-import and bzr checkout providing URL from my repository as both https://... and svn+https://.... In some cases it had some issues with certificates but the output specified argument to ignore them so I did that. Sometimes it asked me to log in (in other cases maybe it remembered... I don't know) which I did. All were running very slow (this could be our server issue) and at some point were interrupted due to connection interruption (this almost for sure is our server issue: it truncates the connection after some time). But since (as opposed to SVN) restarting starts a new rather than from point where it was interrupted I was unable to reach all the ~19000 revisions (ending usually somewhere around 150). What and how should I do with Bazaar? Is is possible to somehow import SVN repository from the local checkout (so that I do not suffer the connection truncation)? I was told that a colleague that used to work with us has done something similar (importing SVN repository with full history) with Mercurial like in no time. So I'm seriously considering now trying Mercurial even if only to see if that will work. But also what are your general guidelines to achieve the listed features?

Read the article

How to configure DNS Server on Fedora

- by user863873

I want to learn how to configure my home PC server into a web server with domain and host. My IP is 109.99.141.133 and now points to a phpinfo page host on my home server. My registed domain is: anunta-anunturi.ro I searched for a tutorial and I've read that I have to configure /etc/named.conf and the file sources for the new zone that I create. So, from the tutorials, my /etc/named.conf looks like this: // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { localhost; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "anunta-anunturi.ro" IN { type master; file "/etc/anunta-anunturi.db"; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; My /etc/anunta-anunturi.db file looks like this — I'm not sure if this is okay, or if it's the easy one. $TTL 86400 anunta-anunturi.ro. IN SOA serveur.anunta-anunturi.ro. root.serveur.anunta-anunturi.ro. ( 1997022700 ; Serial 28800 ; Refresh 14400 ; Retry 3600000 ; Expire 86400 ) ; Minumun IN NS serveur.anunta-anunturi.ro. IN MX 10 mail.anunta-anunturi.ro. serveur.anunta-anunturi.ro. IN A 192.168.1.37 www.anunta-anunturi.ro. IN A 192.168.1.37 mail.anunta-anunturi.ro. IN A 192.168.1.37 Extra info: At home I receive internet from my ISP through a router. My home PC and server recieve their IP automatically from the router when I start/restart. In my local home network, my server receives the IP 192.168.1.37 from the router. When I enter 109.99.141.133 in my browser, it points to the rooter that forwards port 80 to local IP 192.168.1.37 (my home server) Questions: Are my two files good? What/where is my nameserver that I need to copy/paste to my top level domain (where I registered my domain: rotld.ro)?

Read the article

Unauthorized Access Exception using Web Deploy to Site when the site root is a UNC path

- by Peter LaComb Jr.

I am trying to use Web Deploy to deploy a site where the Site is rooted on a UNC path instead of a local drive. This is because I want to have a shared configuration, and have all servers point to the same UNC for content. That would allow me to deploy to one server and have all servers updated at the same time. I've created a share with everyone and users read/write. The NTFS permissions have the ID of the appDomain account as full control, and that is the same account that is configured as the specific user in Management Service Delegation. I can log on to the destination server as that ID, access the share and create/delete files. However, I'm getting the following exception in my Microsoft Web Deploy log on the destination server: User: Client IP: 192.168.62.174 Content-Type: application/msdeploy Version: 9.0.0.0 MSDeploy.VersionMin: 7.1.600.0 MSDeploy.VersionMax: 9.0.1631.0 MSDeploy.Method: Sync MSDeploy.RequestId: c060c823-cdb4-4abe-8294-5ffbdc327d2e MSDeploy.RequestCulture: en-US MSDeploy.RequestUICulture: en-US ServerVersion: 9.0.1631.0 Skip: objectName="^configProtectedData$" Provider: auto, Path: A tracing deployment agent exception occurred that was propagated to the client. Request ID 'c060c823-cdb4-4abe-8294-5ffbdc327d2e'. Request Timestamp: '8/23/2012 11:01:56 AM'. Error Details: ERROR_INSUFFICIENT_ACCESS_TO_SITE_FOLDER Microsoft.Web.Deployment.DeploymentDetailedUnauthorizedAccessException: Unable to perform the operation ("Create Directory") for the specified directory ("\someserver.mydomain.local\sharename\sitename\applicationName"). This can occur if the server administrator has not authorized this operation for the user credentials you are using. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_INSUFFICIENT_ACCESS_TO_SITE_FOLDER. --- Microsoft.Web.Deployment.DeploymentException: The error code was 0x80070005. --- System.UnauthorizedAccessException: Access to the path '\someserver.mydomain.local\sharename\sitename\applicationName' is denied. at Microsoft.Web.Deployment.NativeMethods.RaiseIOExceptionFromErrorCode(Win32ErrorCode errorCode, String maybeFullPath) at Microsoft.Web.Deployment.DirectoryEx.CreateDirectory(String path) at Microsoft.Web.Deployment.DirPathProviderBase.CreateDirectory(String fullPath, DeploymentObject source) at Microsoft.Web.Deployment.DirPathProviderBase.Add(DeploymentObject source, Boolean whatIf) --- End of inner exception stack trace --- --- End of inner exception stack trace --- at Microsoft.Web.Deployment.FilePathProviderBase.HandleKnownRetryableExceptions(DeploymentBaseContext baseContext, Int32[] errorsToIgnore, Exception e, String path, String operation) at Microsoft.Web.Deployment.DirPathProviderBase.Add(DeploymentObject source, Boolean whatIf) at Microsoft.Web.Deployment.DeploymentObject.Add(DeploymentObject source, DeploymentSyncContext syncContext) at Microsoft.Web.Deployment.DeploymentSyncContext.HandleAdd(DeploymentObject destObject, DeploymentObject sourceObject) at Microsoft.Web.Deployment.DeploymentSyncContext.HandleUpdate(DeploymentObject destObject, DeploymentObject sourceObject) at Microsoft.Web.Deployment.DeploymentSyncContext.SyncChildrenNoOrder(DeploymentObject dest, DeploymentObject source) at Microsoft.Web.Deployment.DeploymentSyncContext.SyncChildrenNoOrder(DeploymentObject dest, DeploymentObject source) at Microsoft.Web.Deployment.DeploymentSyncContext.SyncChildrenOrder(DeploymentObject dest, DeploymentObject source) at Microsoft.Web.Deployment.DeploymentSyncContext.ProcessSync(DeploymentObject destinationObject, DeploymentObject sourceObject) at Microsoft.Web.Deployment.DeploymentObject.SyncToInternal(DeploymentObject destObject, DeploymentSyncOptions syncOptions, PayloadTable payloadTable, ContentRootTable contentRootTable, Nullable1 syncPassId) at Microsoft.Web.Deployment.DeploymentAgent.HandleSync(DeploymentAgentAsyncData asyncData, Nullable1 passId) at Microsoft.Web.Deployment.DeploymentAgent.HandleRequestWorker(DeploymentAgentAsyncData asyncData) at Microsoft.Web.Deployment.DeploymentAgent.HandleRequest(DeploymentAgentAsyncData asyncData) This is shown as the following on the console of the machine where I run the deployment: C:\Users\PLaComb"C:\Program Files (x86)\IIS\Microsoft Web Deploy V3\msdeploy.exe" -source:package='C:\Packages\Deployments\applicationName.zip' -dest:auto,computerName='https://SERVERNAME:8172/msdeploy.axd',includeAcls='True' -verb:sync -disableLink:AppPoolExtension -disableLink:ContentExtension -disableLink:CertificateExtension -setParamFile:"C:\Packages\Deployments\applicationName.SetParameters.xml" -allowUntrusted Info: Using ID 'c060c823-cdb4-4abe-8294-5ffbdc327d2e' for connections to the remote server. Info: Adding sitemanifest (sitemanifest). Info: Adding virtual path (JMS/admin) Info: Adding directory (JMS/admin). Error Code: ERROR_INSUFFICIENT_ACCESS_TO_SITE_FOLDER More Information: Unable to perform the operation ("Create Directory") for the specified directory ("\someserver.mydomain.local\sharename\sitename\applicationName"). This can occur if the server administrator has not authorized this operation for the user credentials you are using. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_INSUFFICIENT_ACCESS_TO_SITE_FOLDER. Error: The error code was 0x80070005. Error: Access to the path '\someserver.mydomain.local\sharename\sitename\applicationName' is denied. Error count: 1.

Read the article

Intelligent "Subtraction" of one text logfile from another

- by Vi

Example: Application generates large text log file A with many different messages. It generates similarly large log file B when does not function correctly. I want to see what messages in file B are essentially new, i.e. to filter-out everything from A. Trivial prototype is: Sort | uniq both files Join files sort | uniq -c grep -v "^2" This produces symmetric difference and inconvenient. How to do it better? (including non-symmetric difference and preserving of messages order in B) Program should first analyse A and learn which messages are common, then analyse B showing with messages needs attention. Ideally it should automatically disregard things like timestamps, line numbers or other volatile things. Example. A: 0:00:00.234 Received buffer 0x324234 0:00:00.237 Processeed buffer 0x324234 0:00:00.238 Send buffer 0x324255 0:00:03.334 Received buffer 0x324255 0:00:03.337 Processeed buffer 0x324255 0:00:03.339 Send buffer 0x324255 0:00:05.171 Received buffer 0x32421A 0:00:05.173 Processeed buffer 0x32421A 0:00:05.178 Send buffer 0x32421A B: 0:00:00.134 Received buffer 0x324111 0:00:00.137 Processeed buffer 0x324111 0:00:00.138 Send buffer 0x324111 0:00:03.334 Received buffer 0x324222 0:00:03.337 Processeed buffer 0x324222 0:00:03.338 Error processing buffer 0x324222 0:00:03.339 Send buffer 0x3242222 0:00:05.271 Received buffer 0x3242FA 0:00:05.273 Processeed buffer 0x3242FA 0:00:05.278 Send buffer 0x3242FA 0:00:07.280 Send buffer 0x3242FA failed Result: 0:00:03.338 Error processing buffer 0x324222 0:00:07.280 Send buffer 0x3242FA failed One of ways of solving it can be something like that: Split each line to logical units: 0:00:00.134 Received buffer 0x324111,0:00:00.134,Received,buffer,0x324111,324111,Received buffer, \d:\d\d:\d\d\.\d\d\d, \d+:\d+:\d+.\d+, 0x[0-9A-F]{6}, ... It should find individual words, simple patterns in numbers, common layouts (e.g. "some date than text than number than text than end_of_line"), also handle combinations of above. As it is not easy task, user assistance (adding regexes with explicit "disregard that","make the main factor","don't split to parts","consider as date/number","take care of order/quantity of such messages" rules) should be supported (but not required) for it. Find recurring units and "categorize" lines, filter out too volatile things like timestamps, addresses or line numbers. Analyse the second file, find things that has new logical units (one-time or recurring), or anything that will "amaze" the system which has got used to the first file. Example of doing some bit of this manually: $ cat A | head -n 1 0:00:00.234 Received buffer 0x324234 $ cat A | egrep -v "Received buffer" | head -n 1 0:00:00.237 Processeed buffer 0x324234 $ cat A | egrep -v "Received buffer|Processeed buffer" | head -n 1 0:00:00.238 Send buffer 0x324255 $ cat A | egrep -v "Received buffer|Processeed buffer|Send buffer" | head -n 1 $ cat B | egrep -v "Received buffer|Processeed buffer|Send buffer" 0:00:03.338 Error processing buffer 0x324222 0:00:07.280 Send buffer 0x3242FA failed This is a boring thing (there are a lot of message types); also I can accidentally include some too broad pattern. Also it can't handle complicated things like interrelation between messages. I know that it is AI-related. May be there are already developed tools?

Read the article

Unmountable boot volume blue screen, what should I do?

- by Josh

I was trying to install an update from NVIDIA for my GTX 560, but while it was installing, my computer shut off. After a few minutes, I turned it back on. It got to the Windows boot screen and then had a blue screen error and if left on it would just keep doing that. A few details about my PC: I haven't added any new hardware or software, I'm running Windows XP Professional 32 bit and Windows XP Professional 64 bit on the same hard drive for about 2 years now. I have 2 other hard drives also, but I don't have one large enough to hold everything from my main hard drive, so formatting isn't an option. Now, as for what I've done so far: I've scanned the RAM with "memtest - 86 v3.4" and it said that it was good. I scanned the hard drive in question with chkdsk /r and it gets to 50% and tells me something along the lines of "the drive has one or more unrepairable problems". I also tried to use chkdsk on the drive I installed the new copy of Windows XP on and it got to 75% then jumped back down to 50% and stayed there (I had to reboot the pc). So, after that, I turned off auto reboot and got to read the blue screen error code and I looked it up only to find that nobody seems to have this problem, just problems close to it. The error code is 0x000000ed and I've seen a lot of these online but none that matched the detailed part of the code UNMOUNTABLE_BOOT_VOLUME 0x000000ed (0xfffffadf513c19a0, 0xffffffffc0000006, 0, 0) So, I have installed another copy of Windows XP Professional 32 bit on one of my other hard drives in hopes of accessing the data on the drive in question and when it booted it asked if I wanted chkdsk to scan the drive in question and this is what it found: file record segments 12740, 12741, 12742 and 12743 were reported unreadable. Then it says "recovering lost files" but it sits there for a few seconds and then just boots to Windows. I can't access the drive in question from Windows as far as I can tell, it just says "drive not accessible" and when I go to properties it says that the drive has 100% free space. So, after that failed I didn't give up, I looked for another way to access the drive in question. I used a Ubuntu bootable disk and was able to access the drive in question without any problems. However, I can't access the registry editor because it's a .exe file and that won't load from Ubuntu. I made a copy of the "Windows" folder and put it on one of my other drives and that's where I'm stuck at now. I'm sure my drive works fine, I know chkdsk can't fix the problem with it and I know what caused the problem in the first place for the most part, but I don't know what to do about it. I have a laptop that I can use to download and burn disks if needed and I also have the other copy of Windows XP Professional 32 bit that I can use that's installed on the computer in question (so I know it's not a hardware issue). I'm pretty sure it's a driver issue or the update was editing the registry when it shut off and left me when a broken registry. I've tried accessing C:\Windows\System32\CONFIG only to find that the Windows XP disk repair option can't even access the files on the drive in question. It seems I'll need to be able to do everything from Ubuntu unless there is something I haven't tried with the Windows XP disk. I didn't install the update on Windows XP 64 bit but yet it also has the same blue screen error (that's where the error code above came from but I haven't checked to see if they are the same). They both stopped working at the same time, so I assume it's one problem causing both to not work.

Read the article

how does openvpn decide which interface to get IP addrs from

- by bkrupa

Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on? edit I am trying to set up a vpn so that I can connect to my home network from a remote network. It seems like openvpn is connecting but none of the computers on my home network appear as network machines even after the connection is "Established". Stripped versions of the client and server config files are posted below. Thanks for any help you can offer. server.conf port 1194 proto udp dev tap ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret dh /etc/openvpn/easy-rsa/keys/dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 client.conf client dev tap dev-node tap0901 proto udp remote ********** 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 one other thing that might be helpful, I tried to connect using the openvpn gui for windows and the connection stalls out on "obtaining configuration" and the bar just scrolls forever.

Read the article

Rails Passenger Nginx cannot load such file -- bundler

- by Stuart

I have set up Rails, Passenger, nginx, and PostgreSQL on Ubuntu Server 12.04LTS. Upon trying to access the application/website, however, I am greeted with an error page saying that the application could not be started because a source file is missing. Error message: cannot load such file -- bundler. My nginx config (/opt/nginx/conf/nginx.conf): user railsapp; worker_processes 1; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; passenger_root /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14; passenger_ruby /home/railsapp/.rvm/rubies/ruby-1.9.3-p194/bin/ruby; server { listen 80; server_name fitness_schedules.local; root /home/railsapp/fitness_schedules/public; passenger_enabled on; rack_env development; } } Here is the error message: A source file that the application requires, is missing. It is possible that you didn't upload your application files correctly. Please check whether all your application files are uploaded. A required library may not installed. Please install all libraries that this application requires. Further information about the error may have been written to the application's log file. Please check it in order to analyse the problem. Error message: cannot load such file -- bundler Exception class: LoadError Application root: /home/railsapp/fitness_schedules Here is the backtrace from the webpage that is presented by nginx: Backtrace: # File Line Location 0 /home/railsapp/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb 36 in `require' 1 /home/railsapp/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb 36 in `require' 2 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/utils.rb 325 in `prepare_app_process' 3 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/rack/application_spawner.rb 156 in `block in initialize_server' 4 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/utils.rb 563 in `report_app_init_status' 5 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/rack/application_spawner.rb 154 in `initialize_server' 6 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/abstract_server.rb 204 in `start_synchronously' 7 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/abstract_server.rb 180 in `start' 8 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/rack/application_spawner.rb 129 in `start' 9 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/spawn_manager.rb 253 in `block (2 levels) in spawn_rack_application' 10 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/abstract_server_collection.rb 132 in `lookup_or_add' 11 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/spawn_manager.rb 246 in `block in spawn_rack_application' 12 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/abstract_server_collection.rb 82 in `block in synchronize' 13 prelude> 10:in `synchronize' 14 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/abstract_server_collection.rb 79 in `synchronize' 15 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/spawn_manager.rb 244 in `spawn_rack_application' 16 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/spawn_manager.rb 137 in `spawn_application' 17 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/spawn_manager.rb 275 in `handle_spawn_application' 18 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/abstract_server.rb 357 in `server_main_loop' 19 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/lib/phusion_passenger/abstract_server.rb 206 in `start_synchronously' 20 /home/railsapp/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.14/helper-scripts/passenger-spawn-server 99 in `' In ~/fitness_schedules/log there are only development and test logs, no production/development logs.

Search Results

Search found 37684 results on 1508 pages for 'msp files'.

Page 949/1508 | < Previous Page | 945 946 947 948 949 950 951 952 953 954 955 956 | Next Page >

- by 0xAether

- by Maik

- by Gary Garside

- by tsilb

- by Nithin

- by rbeier

- by Artem Russakovskii

- by normstorm

- by Nefal Warnets

- by Andy Leman

- by thedp

- by Ofer Bar

- by Mariano Martinez Peck

- by s_rathbone

- by Sammaye

- by cr0z3r

- by BullShark

- by digitaltoast

- by Adam Badura

- by user863873

- by Peter LaComb Jr.

- by Vi

- by Josh

- by bkrupa

- by Stuart

< Previous Page | 945 946 947 948 949 950 951 952 953 954 955 956 | Next Page >