Search Results

Search found 2630 results on 106 pages for 'abood mount'.

Page 95/106 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• OpenSolaris livecd, NForce NIC driver, and NTFS USB mounting. Oh My!

  - by Jake Wharton

  I'm attempting to install OpenSolaris 2009.06 on my server. Before I do I would like to test that everything works and am running in to problems. It has an Abit AN-M2 motherboard with an NForce chipset. The driver config utility says that I need a third-party driver and links me to http://homepage2.nifty.com/mrym3/taiyodo/eng/. Scrolling to the bottom, I have downloaded both tgzs just in case. Now the fun part: The only way to get this on to the computer is via a USB drive since I can't access the network. Also, install CD in the drive otherwise I'd just burn them to DVD. Since my USB key is NTFS formatted I cannot mount it since the install CD seems to be lacking NTFS drivers which require more downloaded packages. What should I do? The server will simply be a dumb NAS and I know that there exists other OpenSolaris-based flavors such as Nexenta but from what I read the stock install is likely the best. If this is not the case and pursuing a different flavor is required or better I will also accept that as an answer (but please don't jump straight to it).

  Read the article

• MD RAID 1 with external bitmap doesn't fully resync

  - by user64744

  I have an interesting configuration: dual boot system with a RAID 1 that needs to be visible in both Windows and Linux. The Windows install is Win 7 Enterprise, and the Linux install is Kubuntu 10.04. To get the RAID to work, I set it up using Windows's "Dynamic Disks" RAID 1, and brought it up in Linux using MD with no persistent superblock, and a write-intent bitmap on another partition. (Without this bitmap, MD had no way of knowing that the array was in sync, and would do a complete resync every time the array started.) The array is assembled like so: mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 I expected that the first time I ran this command, it would resync the array, write out a bitmap with no dirty chunks, and all would be good. This wasn't the case: after completing the resync, the bitmap was mostly clean, but about 5% dirty blocks remained, as revealed by mdadm -X /var/local/md1.bitmap I didn't mount the filesystem on /dev/md1 or touch it in any other way. I then found that stopping and restarting the array: mdadm --stop /dev/md1 mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 did indeed read in the bitmap, with an ensuing resync that went quickly because most of the blocks were marked clean. The confusing part is that this resync further reduced the number of dirty blocks, but still did not remove all of them. By repeatedly stopping and restarting I could slowly bring the dirty block count down to around 0.6%, where it seemed to level out. Any ideas what could be causing this? It smells to me of a race condition somewhere that leads to blocks either being skipped over during synchronization or not properly cleared from the bitmap, but I really have no evidence to prove this. It doesn't look like hardware issues since both drives are new and have zero read errors and reallocated sectors reported by smartctl -a.

  Read the article

• how to setup .ssh directory inside an encrypted volume on Mac OSX and still have public key logins?

  - by Vitaly Kushner

  I have my .ssh directory inside an encrypted sparse image. i.e. ~/.ssh is a symlink to /Volumes/VolumeName/.ssh The problem is that when I try to ssh into that machine using a public key I see the following error message in /var/log/secure.log: Authentication refused: bad ownership or modes for directory /Volumes Any way to solve this in a clean way? Update: The permissions on ~/.ssh and authorized_keys are right: > ls -ld ~ drwxr-xr-x+ 77 vitaly staff 2618 Mar 16 08:22 /Users/vitaly/ > ls -l ~/.ssh lrwxr-xr-x 1 vitaly staff 22 Mar 15 23:48 /Users/vitaly/.ssh@ -> /Volumes/Astrails/.ssh > ls -ld /Volumes/Astrails/.ssh drwx------ 3 vitaly staff 646 Mar 15 23:46 /Volumes/Astrails/.ssh/ > ls -ld /Volumes/Astrails/ drwx--x--x@ 18 vitaly staff 1360 Jan 12 22:05 /Volumes/Astrails// > ls -ld /Volumes/ drwxrwxrwt@ 5 root admin 170 Mar 15 20:38 /Volumes// error message sats the problem is with /Volumes, but I don't see the problem. Yes it is o+w but it is also +t which should be ok but apparently isn't. The problem is I can't change /Volumes permissions (or rather shouldn't) but I do want public key login to work. First I thought of mounting the image on other place then /Volumes, but it is automaunted on login by standard OSX mounting. I asked about it here: How to change disk image's default mount directory on osx The only answer I got is "you can't" ;) I could hack my way around, by writing some shellscript that will manually mounting volume at a non-standard location but it would be a gross hack, I'm still looking for a cleaner way to do what I need.

  Read the article

• Raid-z unaccessible after putting one disk offline

  - by varesa

  I have installed FreeNAS on a test server, with 3x 1Tb drives. They are setup in raidz. I tried to offline one of the disks (from the FreeNAS web-ui), and the array became degraded, as I think it should. The problem is with the array becoming unaccessible after that. I thought a raid like that should be able to run fine with one of the disks missing. Atleast very soon after I offline'd and pulled out the disk, the iSCSI share disappeared from a ESXi host's datastores. I also ssh'd into the FreeNAS server, and tried just executing ls /mnt/raid (/mnt/raid/ being the mount point). The whole terminal froze, not accepting ^C or anything. # zpool status -v pool: raid state: DEGRADED status: One or more devices are faulted in response to IO failures. action: Make sure the affected devices are connected, then run 'zpool clear'. see: http://www.sun.com/msg/ZFS-8000-HC scrub: none requested config: NAME STATE READ WRITE CKSUM raid DEGRADED 1 30 0 raidz1 DEGRADED 4 56 0 gptid/c8c9e44c-08e1-11e2-9ba6-001b212a83ea ONLINE 3 60 0 gptid/c96f32d5-08e1-11e2-9ba6-001b212a83ea ONLINE 3 63 0 gptid/ca208205-08e1-11e2-9ba6-001b212a83ea OFFLINE 0 0 0 errors: Permanent errors have been detected in the following files: /mnt/raid/ raid/iscsivol:<0x0> raid/iscsivol:<0x1> Have I understood the workings of a raidz wrong, or is there something else going on? It would not be nice to have the same thing happen on a production system...

  Read the article

• Using NFS for scalable PHP/MySQL web application

  - by Jeroen Moons

  Here's the situation: I have a PHP/MySQL web application that accepts user uploads (pdf files). From these pdf files' pages a preview image is made on the fly and presented to the web app's users. Some pdfs might be on the large side, most will be under 50 MB but some extreme cases could be as large as a few hundred MB. A little waiting for the preview image for large pdf files is acceptable but no more than a minute let's say. Everything is running on one server for now, but soon the app will hit the server's limit on both storage and processing power. My idea to solve the problem: To deal with this situation I had the idea of having one or more pdf processing servers as needed, and one or more file storage servers. These two types of servers are mounted to the server on which the actual app runs using NFS. The app could then use GearMan to delegate pdf processing tasks to these processing servers. The processing server can mount the storage server and read the file stored there, process it and write its output to that server. The servers I'm talking about will be amazon ec2 instances. The web app returns a link to the resulting pdf preview image on the storage server that was used which can then be used on the front end to show the image to the user. My question: I have zero experience with apps that use multiple servers, is this idea viable or is there a better way to do it? Is an NFS setup fast and reliable enough for this situation?

  Read the article

• Install Windows 7 from ISO image

  - by Albert

  Hi, I have an ISO file of the Windows 7 DVD and I want to install it on my PC which currently only runs Linux. I don't have any DVD drive. I have some unpartitioned space on one disk where I want to install it in. When I am doing this for Linux, I usually just create the partitions from the running system, format them, mount them, copy files over, chroot into it, setup the stuff and I can boot into it (or I use some of the uncountable available scripts which do exactly that automatically). However, I have no idea how to do the same thing with Windows. So far, I tried with VMware, i.e. I gave it direct full access to the disk where I want to install it in, installed it there, then tried to boot natively into it. The Windows logo showed up but after maybe 3 seconds or so, it crashes. Safe mode also crashes. I already expected that this probably would exactly behave the way it does right now because I have heard that Windows is quite sensible about hardware changes (i.e. the VMware hardware and the real hardware). However, how can I fix it now that it works? Or I could also just delete it again and try just over. But how exactly? I also searched for ways to boot directly into an ISO file. There seem to be ways to do that via GRUB (and maybe some additional boot loader), although quite complicated. I already tried one method (GRUB: map ...iso (hdX)), however, that didn't worked. Also, even if it does work, I will get into trouble when I boot into the newly installed Windows and it requests for the DVD (because it does that at the first boot into the new system). Seems all quite complicated. Isn't there some easy way like I would do it for Linux? Or what would be the easiest way to get what I want?

  Read the article

• Immediate logout after login with PAM, Kerberos, and LDAP

  - by Dylan Klomparens

  I've set up remote login on a computer using Kerberos and LDAP. I've also configured NFS to mount onto /home so that the user's home directory is the same wherever they login. Kerberos authentication seems to work fine. I can get a ticket using kinit user1 (assuming user1 is a remote user) and see the ticket with klist. I'm pretty sure LDAP is working because I see the proper output from getent passwd, which lists all the remote users. The contents of /home are present when I list the files. The problem is: when I try to login as a remote user the session is immediately ended. Why is it not letting me stay logged in? Here is the output from /var/log/messages after a login attempt: # /var/log/messages: Oct 9 10:57:53 tophat login[6472]: pam_krb5[6472]: authentication succeeds for 'user1' ([email protected]) Oct 9 10:57:53 tophat login[6472]: pam_krb5[6472]: pam_setcred (establish credential) called Oct 9 10:57:53 tophat login[6472]: pam_krb5[6472]: pam_setcred (delete credential) called EDIT: The distro is openSUSE. Here are the common-* files in /etc/pam.d:   # /etc/pam.d/common-account account required pam_unix.so   # /etc/pam.d/common-auth auth sufficient pam_krb5.so minimum_uid=1000 auth required pam_unix.so nullok_secure try_first_pass   # /etc/pam.d/common-session session optional pam_umask.so umask=002 session sufficient pam_krb5.so minimum_uid=1000 session required pam_unix.so There doesn't appear to be a /var/log/auth.log file nor a /var/log/secure file.

  Read the article

• What is the ideal way to set up multiple FTP enabled web accounts on Fedora?

  - by Nicholas Flynt

  I'm setting up a test server for use as a web development platform, and I'd like to mimic as closely as I can a typical shared hosting setup. That is, I'd like my server to have multple user FTP accounts, each of which links to a directory containing the webroot of the site, and I'd like apache to be able to easily see and manupulate these files. I'll admit: I'm not as familiar with Fedora as I'd like, I run Ubuntu on my home box and SElinux is giving me some grief. My initial plan was to have each user FTP into their home directory, and put the web directory there as well, but SElinux throws a hissy fit when apache tries to access anything outside of its web directory, so that plan was a no go. Would it be wise to continue this route, and perhaps mount web directories in user home folders so that FTP could still be used to access them, even though apache saw them in var/www like it expects? Would it make more sense to set up custom FTP accounts and use a single FTP user on the server box? What's the general course of action on something like this? I'm using vsftpd right now to host web directories, which is why I'm liking the home directory approach (it's simple and secure) but of course there's bound to be a better way to go about it. Thanks. (I'll leave other things, like restricted DB access and such, to another post. I'm interested right now with just getting FTP and apache to play nice in a multi-user environment.) PS: For the record, an issue I ran into when doing all of this was that if apache isn't running as the same user as the FTP account is saving as, there are permissions errors when FTP creates files, requiring the remote user to chmod the files to fix it. A logical fix would be to run apache in a special group, put all web users in this group, and have FTP access default to giving this group read/write access to everything like apache would expect, but I never could figure out how to accomplish this. Bonus points and cake if you know a solution.

  Read the article

• KVM and libvirt: How to configure a new disc device to an existing VM?

  - by initall

  I've got an Ubuntu 9.04 server running two VM's. In /etc/libvirt/qemu/machine1.xml two disk devices are defined like this: <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/vserver/machine1/disk0.qcow2'/> <target dev='hda' bus='ide'/> </disk> <disk type='file' device='disk'> <source file='/vserver/machine1/disk1.qcow2'/> <target dev='hdb' bus='ide'/> </disk> I need more storage space in at least one of the devices and thought about adding a third hdc device by simply adding one with same style as above and re-organising my mount structure (The virtual sizes of the current qcow2 files are unfortunately limited.) My problem is that reloading libvirtd and restarting the VM do not result in a new visible device (checked with fdisk). I'm aware of extending an existing qcow2 file (converting to raw format, cat-ing/adding the new one, using smth. like gparted) - but only as a last resort. Hopefully it's something very simple I'm missing?

  Read the article

• Can't mv files between directories on vsftpd

  - by frankyue

  I enabled this in vsftpd.conf chroot_local_user=YES chroot_list_enable=YES chroot_list_file=/etc/vsftpd.chroot_list user_config_dir=/etc/vsftpd_user_conf and here is the user set in vsftpd_user_conf dirctory ftpupload : local_root=/mnt/upload But /mnt/upload is mounted from another directory /mnt/upload on /opt/upload type none (rw,bind) Here is the list in /mn/upload rough_images/ shoes-pentland/ vendor-upload/ shooting/ Additional, the shooting/ directory is mounted from another place /mnt/upload/shooting on /mnt/shooting none (rw,bind) Now here is the problem. When I use the ftp client to move the files between the directories but failed .Files can moved between any directories except the shooting one. The permission is right . I can move any files between this directories successful by using su ftpupload. It means the vsftpd didn't support the mount bind? Here is the vsftpd.conf listen=YES anonymous_enable=NO local_enable=YES write_enable=YES local_umask=000 dirmessage_enable=YES use_localtime=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES chown_username=app xferlog_std_format=NO log_ftp_protocol=YES chroot_local_user=YES chroot_list_enable=YES chroot_list_file=/etc/vsftpd.chroot_list user_config_dir=/etc/vsftpd_user_conf ls_recurse_enable=YES secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd pasv_enable=YES pasv_max_port=*** pasv_min_port=*** port_enable=YES pasv_address=*** virtual_use_local_privs=YES tcp_wrappers=YES and here is the mtab: /mnt/upload /opt/upload none rw,bind 0 0 /mnt/upload/shooting /mnt/shooting none rw,bind 0 0 all of the permissions under the /mnt/upload are the same: drwxrwxrwx * ftpupload app

  Read the article

• Migrating Linux user data to Windows profiles automatically

  - by scott ryan

  I have what seems to be an incredibly simple problem with a very simple solution but I'm having some trouble connecting dots. I have an aging server running Ubuntu Server which hosts roaming profiles. I am switching to a Windows Server 2012 DS shortly. Users used to be named firstinitial.lastname and we are switching to firstname.lastname. I need to transfer things like favorites, documents, etc. from the roaming Linux profile to the user's local Windows profile. So, the way I think it'd work is by using a login script. I think I'd use a script to mount the Linux server's /home for each user, then do copy to various paths (documents, pictures, etc.). But, how do I automate this for each user that logs in? I'm working with a nonprofit, so doing this by hand would probably be out of their budget. I'm open to suggestions, though. What I want is basically Windows Easy Migration, but I'm fairly certain that won't work under Wine... (Kidding, I promise). Thanks!

  Read the article

• Sharing a folder with Nautilus and NTFS external drive gets errors

  - by TheLQ

  I am trying to share a folder in Lubuntu over a network that's on an external NTFS drive. Due to the system that I have (rotating backup disks) this is probably the second time that the drive would of been mounted. Its manually mounted with a simple (for example) mount /dev/sdb1 /media/BACKUP On an internal NTFS disk I have successfully setup a network share and can access it. However on the external disk I can't from any other Windows computer. When setting up the share Nautilus said that it needs to change the other's permissions to allow for other users to write. However afterwords its still blank. Changing it to Read and Write just changes back to blank. Chowning the entire /media folder recursively and trying didn't work. Running PCManFM as root and changing didn't work. Adding "public=yes" to smb.conf and restarting didn't work. I'm out of idea's on what to do. What's weird is that it worked just fine on an internal NTFS disk, so why not the external one? Any solutions need to be able to managed inside of a gui (preferably Nautilus) as the person managing the machine isn't as tech savvy. Thanks

  Read the article

• unable to recover data from failed hdd

  - by Eslam Elyamany

  my hdd failing (or maybe totally dead) i've connected the hdd via USB but it doesn't appear in fdisk Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xe9fb38fb Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 40959999 20376576 7 HPFS/NTFS/exFAT /dev/sda4 40962046 976771071 467904513 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 82913280 86910975 1998848 82 Linux swap / Solaris /dev/sda6 86913024 394113023 153600000 7 HPFS/NTFS/exFAT /dev/sda7 40962048 82913279 20975616 83 Linux /dev/sda8 394122708 976768064 291322678+ 7 HPFS/NTFS/exFAT Partition 8 does not start on physical sector boundary. no sdc appears here , BUT it's appears on /dev/ rootghost-lap:/home/ghost# ls /dev/sd* /dev/sda /dev/sda2 /dev/sda5 /dev/sda8 /dev/sdb /dev/sdc1 /dev/sdc2 /dev/sdc6 /dev/sdc8 /dev/sda1 /dev/sda4 /dev/sda6 /dev/sda9 /dev/sdc /dev/sdc10 /dev/sdc5 /dev/sdc7 /dev/sdc9 also it appears in proc Code: rootghost-lap:/home/ghost# cat /proc/partitions major minor #blocks name 8 0 488386584 sda 8 1 102400 sda1 8 2 20376576 sda2 8 4 1 sda4 8 5 1998848 sda5 8 6 153600000 sda6 8 8 291322678 sda8 8 9 20975616 sda9 11 0 1048575 sr0 11 1 99136 sr1 8 32 244198583 sdc 8 33 14651248 sdc1 8 34 1 sdc2 8 37 15380480 sdc5 8 38 4153344 sdc6 8 39 48829536 sdc7 8 40 48829536 sdc8 8 41 110374551 sdc9 8 42 1975963 sdc10 and dmesg : [10604.777168] end_request: I/O error, dev sdc, sector 1 [10604.817238] sd 26:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10604.817243] sd 26:0:0:0: [sdc] Sense Key : Aborted Command [current] [10604.817248] sd 26:0:0:0: [sdc] Add. Sense: No additional sense information [10604.817253] sd 26:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 02 00 00 06 00 ok now , let's see what i've tried testdisk to check for partitions -- failed dd to copy data from /dev/sdcX -- provide strange output size for example /dev/sdc1 is about 15G , the output for dd is 62G+ so i had to cancle it safecopy successfully made an image for partitons , but can't fix images, can't mount it, can't do any thing with it and some other tools i've tried and all failed , so any idea ?

  Read the article

• Delay init from starting a service for a period of time?

  - by Matthew

  I am trying to get a rudimentary NFS server up and running. Right now the server is configured as an NFS server due to a workaround for a vendor issue not supporting direct attached clustered storage, which we are trying to get them to resolve. The vendor software is Splunk. The splunk feature we are using requires files be located on shared storage (which for us is /mnt/nfs until they support a real clustered filesystem). Currently the server has a GFS2 filesystem mounted at bootup (it is the only server with the filesystem actively mounted so there should be no problems with locking). We went with GFS2 so switching over to a clustered filesystem is easy should the vendor begin supporting it. NFS is configured to mount that filesystem at /mnt/nfs, which the splunk installation than sees. Splunk is configured to find it's configuration files in /mnt/nfs. However, I am running into a problem where the splunk daemon starts before nfs is finished loading, and because it sees nothing at /mnt/nfs it starts creating files there, and then when the files disappear (nfs finishes mounting the share), splunk craps out. Splunk is set to run at runlevel 3, S90. NFS is set at runlevels 2-5, S60. Is there any way to delay the startup of the splunk process further?

  Read the article

• Dropped WD External Harddisk, now it's shown as "Not initialized"

  - by Phelios

  So, the WD my passport external harddisk is dropped, and after that, the computer is unable to read it anymore. I was hopping if I can just find another case to try if the harddisk is still readable, but looks like the hard drive itself is not a normal SATA or PATA drive. I think it's modified. So, I can't find another case that I can try on. In the computer, I still can see the drive in the "Disk Management", but it's shown as Uninitialized, no size, and no drive letter. I've also tried a couple of recovery tools. Some can't detect at all, there is one (find and mount software) that can detect but shows 0 size. None of them can recover the data. WD is willing to replace it with a new one, but I still need to recover the data. Any way I can recover the data? UPDATE: I tried initialized it from the windows Disk Manager, but it give error "The request could not be performed because of an I/O device error."

  Read the article

• Heartbeat/DRBD failover didn't work as expected. How do I make the failover more robust?

  - by Quinn Murphy

  I had a scenario where a DRBD-heartbeat set up had a failed node but did not failover. What happened was the primary node had locked up, but didn't go down directly (it was inaccessible via ssh or with the nfs mount, but it could be pinged). The desired behavior would have been to detect this and failover to the secondary node, but it appears that since the primary didn't go full down (there is a dedicated network connection from server to server), heartbeat's detection mechanism didn't pick up on that and therefore didn't failover. Has anyone seen this? Is there something that I need to configure to have more robust cluster failover? DRBD seems to otherwise work fine (had to resync when I rebooted the old primary), but without good failover, it's use is limited. heartbeat 3.0.4 drbd84 RHEL 6.1 We are not using Pacemaker nfs03 is the primary server in this setup, and nfs01 is the secondary. ha.cf # Hearbeat Logging logfacility daemon udpport 694 ucast eth0 192.168.10.47 ucast eth0 192.168.10.42 # Cluster members node nfs01.openair.com node nfs03.openair.com # Hearbeat communication timing. # Sets the triggers and pulse time for swapping over. keepalive 1 warntime 10 deadtime 30 initdead 120 #fail back automatically auto_failback on and here is the haresources file: nfs03.openair.com IPaddr::192.168.10.50/255.255.255.0/eth0 drbddisk::data Filesystem::/dev/drbd0::/data::ext4 nfs nfslock

  Read the article

• Oracle: Getting ORA-01195 and ORA-01110 when attempting resetlogs

  - by MacAnthony

  I am trying to get our database to startup. When I login to sqlplus and do a startup, I get the message: Total System Global Area 534462464 bytes Fixed Size 2215064 bytes Variable Size 331350888 bytes Database Buffers 192937984 bytes Redo Buffers 7958528 bytes Database mounted. ORA-01589: must use RESETLOGS or NORESETLOGS option for database open So I do a shutdown, startup mount (which works fine) and then run: SQL> alter database recover using backup controlfile until cancel; alter database recover using backup controlfile until cancel * ERROR at line 1: ORA-00283: recovery session canceled due to errors ORA-19909: datafile 1 belongs to an orphan incarnation ORA-01110: data file 1: '/<path>/system01.dbf' SQL> alter database open resetlogs; alter database open resetlogs * ERROR at line 1: ORA-01195: online backup of file 1 needs more recovery to be consistent ORA-01110: data file 1: '/<path>/system01.dbf' I know I've used instructions to get me past this error before, but I seem to be having trouble tracking it down. A bit of history: We wanted to refresh the data in this from another db so we attempted to do a expdb/impdb into this instance. The impdb did not complete correctly and got an end of file error message in it and hung (I still have the message in a log if it's important). Since the instance would start at this point, we decided to use the hotbackup process we have to restore the db. The hotbackups are from another server/instance. We went through the same process 2 weeks ago. At the point of recreating the control file is where we got to the issue above.

  Read the article

• Few questions about a good projector on my PC and tv?

  - by jasondavis

  I have always wanted a projector for my tv, satelite, cable, and even PC in a spare bedroom. Well it's more of a home office that I spend most my time in and the catch here is it is a small room. Room is only the standard 8foot tall. Room is about 13 feet wide on the wall where I would like to mount the project and the wall where the screen would be for it. So only about 13 feet away from projector to screen. I would like to know... 1) From experience or knowledge what would be a good projector I could hook up to my satelite box and also my PC? Cheaper is better in this case but I would still like the best image for my buck and something reliable. There is no sunlight in the room either to worry about. 2) From that distance of about 12-13 feet away, how big of a clear picture could I expect? 3) What kind of cables would I need to purchase and run through my attic to my cable/satelite receiver box as well as my PC? 4) These cables in question 3 would most likely need to be a good 15-20feet in length to reach, would I need anything special for that to work at those distances?

  Read the article

• virtual machines, dual booting and data disks on SSD

  - by stevemarvell

  This is in planning, so if I've got the strategy wrong, please let me know. There are multiple questions here, but I think they all degenerate to the same answers. The hardware is a laptop with a single SSD. I'm trying to not lose the performance of the SSD. I plan a native dual booting Windows (plus cygwin) and Linux machine which is my BYOD and represents the development environment. I keep the codebase on a shared partition (though sometimes this is an external thunderbolt SSD) which can be natively "mounted" by whichever OS is in operation. I boot into one or the other environments depending on the task in hand. Sometime I have to develop with windows tools, but generally, Linux is my preferred development environment. It would be ideal if I could VM the other OS and run either in either. I'm going to assume, because I've not found a sensible VM based solution, that I have get samba involved to share the code partition between VMs. Is this going to blow my SSD performance in the VM? The client also supplies me with a VM for the target environment, usually linux. This is not often suited to development and is used for testing only. I normally keep two copies of this, one as a sandbox and one which I deploy to using the client's preferred method. I keep these VM snapshots on the shared partition. The latter is interacted with over the network and so has no disk sharing requirements. However, it would be useful for the sandbox to be able to "mount" the code base from the natively running OS. Is this samba or nfs again, depending on the native OS? Am I missing a trick which allows this to all work smoothly with all four environments running at once without loosing the SSD performance?

  Read the article

• Ubuntu hard disk getting SATA errors

  - by Henadzy

  I am getting "UNC" errors on a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount the filesystem on another computer, it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } [...snip 3 similar repeats of last 4 lines; see revision history for full log...] Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

  Read the article

• Partitioning & Linux

  - by Zac

  Every tutorial on Linux-based partitioning schemes (or, just partitioning in general) will tell you that a PC can have either 4 primary partitions, or 3 primaries and 1 extended. They will all also tell you that Linux (in my case, Ubuntu) can be installed on either. It's also come to my attention that it is not too atypical for FHS directories, such as usr/, tmp/, etc/, home/ or var/ to be mounted separately on other partitions. Several questions I am unable to find the answers to, purely for my own edification: (1) By "PC", are we really talking about common PC disk types, like IDE or SATA? I guess I'm wondering why PC uses are limited to 4 primaries or 3 primaries + 1 extended (2) I'm choking on some basic OS concepts: it is said that a partition can be mounted by a file system or an OS. So I assume this means I can somehow instruct Ubuntu to mount to 1 partition, and then any part of, say, ReiserFS, to be mounted to another partition? How? (3)(a) What about creating swap partitions? Is there too much of a good thing with swap partitioning? If I have 4GB RAM over 320GB disk, what should my swap partition size be, and why? (3)(b) Are swap files the only way to create swap partitions? Wouldn't a Linux partitioning utility allow me to define a partition as being for virtual memory only? (4) Why are partitions limited to being "mounted" by just OSes and file systems? Why couldn't I write a program to take up its own, say, 512 MB partition, and then have it invoked or uses by an OS installed on another partition? Thanks for shedding any light here... not critical that I know this stuff, but it's got me thinking incessantly. And when I think incessantly, I...can't......sleep....

  Read the article

• All of the NTFS hard links damaged, where are hardlinks stored and how to recover them?

  - by String Xu

  This is Windows 7 x64 sp1 on a NTFS file system. All hardlinks within C:\Windows\System32 folder disappear, and the Windows can't boot, because even the osloader, C:\Windows\System32\boot\Winload.exe also disappeared. Nevertheless, the original files are still located in the corresponding C:\Windows\winsxs folders. After booting into the Recovery Environment, and copied one Winload.exe (x64) from other folder, Windows gave an error pointing out that "ntoskrnl.exe is corrupted or missing...its file digital signature cannot be verified" In trying to boot in Safe Mode, the message above was shown after a screen prompting "Loaded \Windows\system32\config\system" Because at this early booting stage, smss.exe was still not loaded, so there is not any dumping and logs. Based on my study, ntoskrnl.exe depends on the following files: C:\windows\system32\PSHED.DLL C:\Windows\System32\hal.dll C:\Windows\System32\kdcom.dll C:\Windows\System32\clfs.sys C:\Windows\System32\ci.dll All those files above are copied from their corresponding folders and verified their md5 with a well-operating Windows 7 x64 SP1. But the booting error is still the same: "ntoskrnl.exe is corrupted or missing..." Background: 1. Before the reboot, there was an windows update going on. Then something unknown happen, almost all processes were broken to run, including the windows task manager, taskmgr.exe. After mount the hard disk to other computer, it seems that all hardlinks within C:\Windows\System32 folder were gone. I tried several data recovery software, but they are not be able to find those disappeared NTFS hard links. So the question is: Where are information about those hard links stored? And how to recover them? Are they depend on some windows service or stored in the registry?

  Read the article

• Exchange 2007 - Mailbox Database Recovery

  - by Phrontiste

  Exchange 2007 edb Can we restore Exchange edb (First storage group\mailbox database.edb) to another exchange server ? Do I just copy the edb to the new exchange server and delete the first storage group\mailbox database.edb and replace it with this one ? How can I get all the mailboxes from that (old) mailbox database.edb ? I had a exchange 2007 server with 10 mailboxes, I have installed exchange on another machine and was thinking if I can do the above ? or is there any way I can get all the mailboxes from that edb (old mailbox database) and import them into the new one. I have deleted the old exchange install I had (these are test machines) What are the steps required to get the DB working on the new machine ? Also, I am confused about the recovery storage group ? I can mount a mailbox database in recovery storage group, but when I try to get mailbox out of it, it won't match any thing ? can someone please assist in understanding RSG and how to restore the OLD mailbox database. thanks and regards Phrontiste

  Read the article

• What is the difference between a PDU and a power strip (both 120V, 15A)?

  - by rob

  I just chatted with an APC rep about upgrading the UPSes at our office. She recommended a single higher-capacity 6-outlet Smart-UPS to replace the four Back-UPS units we currently have. When I asked how she recommended plugging in all the current devices, she recommended using a APC's AP9567 PDU, but said not to use a power strip. At first she said I had to use an APC brand PDU, but after I inquired about using a Tripp-Lite PDU, she said any brand PDU would be fine. The APC PDU previously referenced looks like a standard 120V power strip with overload protection but no surge protection. Other than overload protection (which seems redundant if plugging into the UPS), is there something else I'm missing, or should any power strip (without surge protection) be fine? Edit: I didn't mention it earlier, but we don't have a proper rack--though I did still plan to mount the PDU or power strip to something. I guess I'm wondering if there's any special reason I should pay as much as $180 for the low-end APC PDU (which just looks like a power strip to me) vs. $20-$30 for a workbench power strip.

  Read the article

• Software RAID 1 Configuration

  - by Corve

  I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >