Search Results

Search found 5457 results on 219 pages for 'necessary'.

Page 95/219 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Solaris 11.1: Changes to included FOSS packages

    - by alanc
    Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

    Read the article

  • Include weather information in ASP.Net site from weather.com services

    - by sreejukg
    In this article, I am going to demonstrate how you can use the XMLOAP services (referred as XOAP from here onwards) provided by weather.com to display the weather information in your website. The XOAP services are available to be used for free of charge, provided you are comply with requirements from weather.com. I am writing this article from a technical point of view. If you are planning to use weather.com XOAP services in your application, please refer to the terms and conditions from weather.com website. In order to start using the XOAP services, you need to sign up the XOAP datafeed. The signing process is simple, you simply browse the url http://www.weather.com/services/xmloap.html. The URL looks similar to the following. Click on the sign up button, you will reach the registration page. Here you need to specify the site name you need to use this feed for. The form looks similar to the following. Once you fill all the mandatory information, click on save and continue button. That’s it. The registration is over. You will receive an email that contains your partner id, license key and SDK. The SDK available in a zipped format, contains the terms of use and documentation about the services available. Other than this the SDK includes the logos and icons required to display the weather information. As per the SDK, currently there are 2 types of information available through XOAP. These services are Current Conditions for over 30,000 U.S. and over 7,900 international Location IDs Updated at least Hourly Five-Day Forecast (today + 4 additional forecast days in consecutive order beginning with tomorrow) for over 30,000 U.S. and over 7,900 international Location IDs Updated at least Three Times Daily The SDK provides detailed information about the fields included in response of each service. Additionally there is a refresh rate that you need to comply with. As per the SDK, the refresh rate means the following “Refresh Rate” shall mean the maximum frequency with which you may call the XML Feed for a given LocID requesting a data set for that LocID. During the time period in between refresh periods the data must be cached by you either in the memory on your servers or in Your Desktop Application. About the Services Weather.com will provide you with access to the XML Feed over the Internet through the hostname xoap.weather.com. The weather data from the XML feed must be requested for a specific location. So you need a location ID (LOC ID). The XML feed work with 2 types of location IDs. First one is with City Identifiers and second one is using 5 Digit US postal codes. If you do not know your location ID, don’t worry, there is a location id search service available for you to retrieve the location id from city name. Since I am a resident in the Kingdom of Bahrain, I am going to retrieve the weather information for Manama(the capital of Bahrain) . In order to get the location ID for Manama, type the following URL in your address bar. http://xoap.weather.com/search/search?where=manama I got the following XML output. <?xml version="1.0" encoding="UTF-8"?> <!-- This document is intended only for use by authorized licensees of The –> <!-- Weather Channel. Unauthorized use is prohibited. Copyright 1995-2011, –> <!-- The Weather Channel Interactive, Inc. All Rights Reserved. –> <search ver="3.0">       <loc id="BAXX0001" type="1">Al Manama, Bahrain</loc> </search> You can try this with any city name, if the city is available, it will return the location id, and otherwise, it will return nothing. In order to get the weather information, from XOAP,  you need to pass certain parameters to the XOAP service. A brief about the parameters are as follows. Please refer SDK for more details. Parameter name Possible Value cc Optional, if you include this, the current condition will be returned. Value can be anything, as it will be ignored e.g. cc=* dayf If you want the forecast for 5 days, specify dayf=5 This is optional iink Value should be XOAP par Your partner id. You can find this in your registration email from weather.com prod Value should be XOAP key The license key assigned to you. This will be available in the registration email unit s or m (standard or matric or you can think of Celsius/Fahrenheit) this is optional field, if not specified the unit will be standard(s) The URL host for the XOAP service is http://xoap.weather.com. So for my purpose, I need the following request to be made to access the XOAP services. http://xoap.weather.com/weather/local/BAXX0001?cc=*&link=xoap&prod=xoap&par=*********&key=************** (The ***** to be replaced with the corresponding alternatives) The response XML have a root element “weather”. Under the root element, it has the following sections <head> - the meta data information about the weather results returned. <loc> - the location data block that provides, the information about the location for which the wheather data is retrieved. <lnks> - the 4 promotional links you need to place along with the weather display. Additional to these 4 links, there should be another link with weather channel logo to the home page of weather.com. <cc> - the current condition data. This element will be there only if you specify the cc element in the request. <dayf> - the forcast data as you specified. This element will be there only if you specify the dayf in the request. In this walkthrough, I am going to capture the weather information for Manama (Location ID: BAXX0001). You need 2 applications to display weather information in your website. A Console application that retrieves data from the XMLOAP and store in the SQL Server database (or any data store as you prefer).This application will be scheduled to execute in every 25 minutes using windows task scheduler, so that we can comply with the refresh rate. A web application that display data from the SQL Server database Retrieve the Weather from XOAP I have created a console application named, Weather Service. I created a SQL server database, with the following columns. I named the table as tblweather. You are free to choose any name. Column name Description lastUpdated Datetime, this is the last time when the weather data is updated. This is the time of the service running TemparatureDateTime The date and time returned by XML feed Temparature The temperature returned by the XML feed. TemparatureUnit The unit of the temperature returned by the XML feed iconId The id of the icon to be used. Currently 48 icons from 0 to 47 are available. WeatherDescription The Weather Description Phrase returned by the feed. Link1url The url to the first promo link Link1Text The text for the first promo link Link2url The url to the second promo link Link2Text The text for the second promo link Link3url The url to the third promo link Link3Text The text for the third promo link Link4url The url to the fourth promo link Link4Text The text for the fourth promo link Every time when the service runs, the application will update the database columns from the XOAP data feed. When the application starts, It is going to get the data as XML from the url. This demonstration uses LINQ to extract the necessary data from the fetched XML. The following are the code segment for extracting data from the weather XML using LINQ. // first, create an instance of the XDocument class with the XOAP URL. replace **** with the corresponding values. XDocument weather = XDocument.Load("http://xoap.weather.com/weather/local/BAXX0001?cc=*&link=xoap&prod=xoap&par=***********&key=c*********"); // construct a query using LINQ var feedResult = from item in weather.Descendants() select new { unit = item.Element("head").Element("ut").Value, temp = item.Element("cc").Element("tmp").Value, tempDate = item.Element("cc").Element("lsup").Value, iconId = item.Element("cc").Element("icon").Value, description = item.Element("cc").Element("t").Value, links = from link in item.Elements("lnks").Elements("link") select new { url = link.Element("l").Value, text = link.Element("t").Value } }; // Load the root node to a variable, you may use foreach construct instead. var item1 = feedResult.First(); *If you want to learn more about LINQ and XML, read this nice blog from Scott GU. http://weblogs.asp.net/scottgu/archive/2007/08/07/using-linq-to-xml-and-how-to-build-a-custom-rss-feed-reader-with-it.aspx Now you have all the required values in item1. For e.g. if you want to get the temperature, use item1.temp; Now I just need to execute an SQL query against the database. See the connection part. using (SqlConnection conn = new SqlConnection(@"Data Source=sreeju\sqlexpress;Initial Catalog=Sample;Integrated Security=True")) { string strSql = @"update tblweather set lastupdated=getdate(), temparatureDateTime = @temparatureDateTime, temparature=@temparature, temparatureUnit=@temparatureUnit, iconId = @iconId, description=@description, link1url=@link1url, link1text=@link1text, link2url=@link2url, link2text=@link2text,link3url=@link3url, link3text=@link3text,link4url=@link4url, link4text=@link4text"; SqlCommand comm = new SqlCommand(strSql, conn); comm.Parameters.AddWithValue("temparatureDateTime", item1.tempDate); comm.Parameters.AddWithValue("temparature", item1.temp); comm.Parameters.AddWithValue("temparatureUnit", item1.unit); comm.Parameters.AddWithValue("description", item1.description); comm.Parameters.AddWithValue("iconId", item1.iconId); var lstLinks = item1.links; comm.Parameters.AddWithValue("link1url", lstLinks.ElementAt(0).url); comm.Parameters.AddWithValue("link1text", lstLinks.ElementAt(0).text); comm.Parameters.AddWithValue("link2url", lstLinks.ElementAt(1).url); comm.Parameters.AddWithValue("link2text", lstLinks.ElementAt(1).text); comm.Parameters.AddWithValue("link3url", lstLinks.ElementAt(2).url); comm.Parameters.AddWithValue("link3text", lstLinks.ElementAt(2).text); comm.Parameters.AddWithValue("link4url", lstLinks.ElementAt(3).url); comm.Parameters.AddWithValue("link4text", lstLinks.ElementAt(3).text); conn.Open(); comm.ExecuteNonQuery(); conn.Close(); Console.WriteLine("database updated"); } Now click ctrl + f5 to run the service. I got the following output Check your database and make sure, the data is updated with the latest information from the service. (Make sure you inserted one row in the database by entering some values before executing the service. Otherwise you need to modify your application code to count the rows and conditionally perform insert/update query) Display the Weather information in ASP.Net page Now you got all the data in the database. You just need to create a web application and display the data from the database. I created a new ASP.Net web application with a default.aspx page. In order to comply with the terms of weather.com, You need to use Weather.com logo along with the weather display. You can find the necessary logos to use under the folder “logos” in the SDK. Additionally copy any of the icon set from the folder “icons” to your web application. I used the 93x93 icon set. You are free to use any other sizes available. The design view of the page in VS2010 looks similar to the following. The page contains a heading, an image control (for displaying the weather icon), 2 label controls (for displaying temperature and weather description), 4 hyperlinks (for displaying the 4 promo links returned by the XOAP service) and weather.com logo with hyperlink to the weather.com home page. I am going to write code that will update the values of these controls from the values stored in the database by the service application as mentioned in the previous step. Go to the code behind file for the webpage, enter the following code under Page_Load event handler. using (SqlConnection conn = new SqlConnection(@"Data Source=sreeju\sqlexpress;Initial Catalog=Sample;Integrated Security=True")) { SqlCommand comm = new SqlCommand("select top 1 * from tblweather", conn); conn.Open(); SqlDataReader reader = comm.ExecuteReader(); if (reader.Read()) { lblTemparature.Text = reader["temparature"].ToString() + "&deg;" + reader["temparatureUnit"].ToString(); lblWeatherDescription.Text = reader["description"].ToString(); imgWeather.ImageUrl = "icons/" + reader["iconId"].ToString() + ".png"; lnk1.Text = reader["link1text"].ToString(); lnk1.NavigateUrl = reader["link1url"].ToString(); lnk2.Text = reader["link2text"].ToString(); lnk2.NavigateUrl = reader["link2url"].ToString(); lnk3.Text = reader["link3text"].ToString(); lnk3.NavigateUrl = reader["link3url"].ToString(); lnk4.Text = reader["link4text"].ToString(); lnk4.NavigateUrl = reader["link4url"].ToString(); } conn.Close(); } Press ctrl + f5 to run the page. You will see the following output. That’s it. You need to configure the console application to run every 25 minutes so that the database is updated. Also you can fetch the forecast information and store those in the database, and then retrieve it later in your web page. Since the data resides in your database, you have the full control over your display. You need to make sure your website comply with weather.com license requirements. If you want to get the source code of this walkthrough through the application, post your email address below. Hope you enjoy the reading.

    Read the article

  • Laissez les bon temps rouler! (Microsoft BI Conference 2010)

    - by smisner
    "Laissez les bons temps rouler" is a Cajun phrase that I heard frequently when I lived in New Orleans in the mid-1990s. It means "Let the good times roll!" and encapsulates a feeling of happy expectation. As I met with many of my peers and new acquaintances at the Microsoft BI Conference last week, this phrase kept running through my mind as people spoke about their plans in their respective businesses, the benefits and opportunities that the recent releases in the BI stack are providing, and their expectations about the future of the BI stack. Notwithstanding some jabs here and there to point out the platform is neither perfect now nor will be anytime soon (along with admissions that the competitors are also not perfect), and notwithstanding several missteps by the event organizers (which I don't care to enumerate), the overarching mood at the conference was positive. It was a refreshing change from the doom and gloom hovering over several conferences that I attended in 2009. Although many people expect economic hardships to continue over the coming year or so, everyone I know in the BI field is busier than ever and expects to stay busy for quite a while. Self-Service BI Self-service was definitely a theme of the BI conference. In the keynote, Ted Kummert opened with a look back to a fairy tale vision of self-service BI that he told in 2008. At that time, the fairy tale future was a time when "every end user was able to use BI technologies within their job in order to move forward more effectively" and transitioned to the present time in which SQL Server 2008 R2, Office 2010, and SharePoint 2010 are available to deliver managed self-service BI. This set of technologies is presumably poised to address the needs of the 80% of users that Kummert said do not use BI today. He proceeded to outline a series of activities that users ought to be able to do themselves--from simple changes to a report like formatting or an addtional data visualization to integration of an additional data source. The keynote then continued with a series of demonstrations of both current and future technology in support of self-service BI. Some highlights that interested me: PowerPivot, of course, is the flagship product for self-service BI in the Microsoft BI stack. In the TechEd keynote, which was open to the BI conference attendees, Amir Netz (twitter) impressed the audience by demonstrating interactivity with a workbook containing 100 million rows. He upped the ante at the BI keynote with his demonstration of a future-state PowerPivot workbook containing over 2 billion records. It's important to note that this volume of data is being processed by a server engine, and not in the PowerPivot client engine. (Yes, I think it's impressive, but none of my clients are typically wrangling with 2 billion records at a time. Maybe they're thinking too small. This ability to work quickly with large data sets has greater implications for BI solutions than for self-service BI, in my opinion.) Amir also demonstrated KPIs for the future PowerPivot, which appeared to be easier to implement than in any other Microsoft product that supports KPIs, apart from simple KPIs in SharePoint. (My initial reaction is that we have one more place to build KPIs. Great. It's confusing enough. I haven't seen how well those KPIs integrate with other BI tools, which will be important for adoption.) One more PowerPivot feature that Amir showed was a graphical display of the lineage for calculations. (This is hugely practical, especially if you build up calculations incrementally. You can more easily follow the logic from calculation to calculation. Furthermore, if you need to make a change to one calculation, you can assess the impact on other calculations.) Another product demonstration will be available within the next 30 days--Pivot for Reporting Services. If you haven't seen this technology yet, check it out at www.getpivot.com. (It definitely has a wow factor, but I'm skeptical about its practicality. However, I'm looking forward to trying it out with data that I understand.) Michael Tejedor (twitter) demonstrated a feature that I think is really interesting and not emphasized nearly enough--overshadowed by PowerPivot, no doubt. That feature is the Microsoft Business Intelligence Indexing Connector, which enables search of the content of Excel workbooks and Reporting Services reports. (This capability existed in MOSS 2007, but was more cumbersome to implement. The search results in SharePoint 2010 are not only cooler, but more useful by describing whether the content is found in a table or a chart, for example.) This may yet be the dawning of the age of self-service BI - a phrase I've heard repeated from time to time over the last decade - but I think BI professionals are likely to stay busy for a long while, and need not start looking for a new line of work. Kummert repeatedly referenced strategic BI solutions in contrast to self-service BI to emphasize that self-service BI is not a replacement for the services that BI professionals provide. After all, self-service BI does not appear magically on user desktops (or whatever device they want to use). A supporting infrastructure is necessary, and grows in complexity in proportion to the need to simplify BI for users. It's one thing to hear the party line touted by Microsoft employees at the BI keynote, but it's another to hear from the people who are responsible for implementing and supporting it within an organization. Rob Collie (blog | twitter), Kasper de Jonge (blog | twitter), Vidas Matelis (site | twitter), and I were invited to join Andrew Brust (blog | twitter) as he led a Birds of a Feather session at TechEd entitled "PowerPivot: Is It the BI Deal-Changer for Developers and IT Pros?" I would single out the prevailing concern in this session as the issue of control. On one side of this issue were those who were concerned that they would lose control once PowerPivot is implemented. On the other side were those who believed that data should be freely accessible to users in PowerPivot, and even acknowledgment that users would get the data they want even if it meant they would have to manually enter into a workbook to have it ready for analysis. For another viewpoint on how PowerPivot played out at the conference, see Rob Collie's observations. Collaborative BI I have been intrigued by the notion of collaborative BI for a very long time. Before I discovered BI, I was a Lotus Notes developer and later a manager of developers, working in a software company that enabled collaboration in the legal industry. Not only did I help create collaborative systems for our clients, I created a complete project management from the ground up to collaboratively manage our custom development work. In that case, collaboration involved my team, my client contacts, and me. I was also able to produce my own BI from that system as well, but didn't know that's what I was doing at the time. Only in recent years has SharePoint begun to catch up with the capabilities that I had with Lotus Notes more than a decade ago. Eventually, I had the opportunity at that job to formally investigate BI as another product offering for our software, and the rest - as they say - is history. I built my first data warehouse with Scott Cameron (who has also ventured into the authoring world by writing Analysis Services 2008 Step by Step and was at the BI Conference last week where I got to reminisce with him for a bit) and that began a career that I never imagined at the time. Fast forward to 2010, and I'm still lauding the virtues of collaborative BI, if only the tools will catch up to my vision! Thus, I was anxious to see what Donald Farmer (blog | twitter) and Rita Sallam of Gartner had to say on the subject in their session "Collaborative Decision Making." As I suspected, the tools aren't quite there yet, but the vendors are moving in the right direction. One thing I liked about this session was a non-Microsoft perspective of the state of the industry with regard to collaborative BI. In addition, this session included a better demonstration of SharePoint collaborative BI capabilities than appeared in the BI keynote. Check out the video in the link to the session to see the demonstration. One of the use cases that was demonstrated was linking from information to a person, because, as Donald put it, "People don't trust data, they trust people." The Microsoft BI Stack in General A question I hear all the time from students when I'm teaching is how to know what tools to use when there is overlap between products in the BI stack. I've never taken the time to codify my thoughts on the subject, but saw that my friend Dan Bulos provided good insight on this topic from a variety of perspectives in his session, "So Many BI Tools, So Little Time." I thought one of his best points was that ideally you should be able to design in your tool of choice, and then deploy to your tool of choice. Unfortunately, the ideal is yet to become real across the platform. The closest we come is with the RDL in Reporting Services which can be produced from two different tools (Report Builder or Business Intelligence Development Studio's Report Designer), manually, or by a third-party or custom application. I have touted the idea for years (and publicly said so about 5 years ago) that eventually more products would be RDL producers or consumers, but we aren't there yet. Maybe in another 5 years. Another interesting session that covered the BI stack against a backdrop of competitive products was delivered by Andrew Brust. Andrew did a marvelous job of consolidating a lot of information in a way that clearly communicated how various vendors' offerings compared to the Microsoft BI stack. He also made a particularly compelling argument about how the existence of an ecosystem around the Microsoft BI stack provided innovation and opportunities lacking for other vendors. Check out his presentation, "How Does the Microsoft BI Stack...Stack Up?" Expo Hall I had planned to spend more time in the Expo Hall to see who was doing new things with the BI stack, but didn't manage to get very far. Each time I set out on an exploratory mission, I got caught up in some fascinating conversations with one or more of my peers. I find interacting with people that I meet at conferences just as important as attending sessions to learn something new. There were a couple of items that really caught me eye, however, that I'll share here. Pragmatic Works. Whether you develop SSIS packages, build SSAS cubes, or author SSRS reports (or all of the above), you really must take a look at BI Documenter. Brian Knight (twitter) walked me through the key features, and I must say I was impressed. Once you've seen what this product can do, you won't want to document your BI projects any other way. You can download a free single-user database edition, or choose from more feature-rich standard or professional editions. Microsoft Press ebooks. I also stopped by the O'Reilly Media booth to meet some folks that one of my acquisitions editors at Microsoft Press recommended. In case you haven't heard, Microsoft Press has partnered with O'Reilly Media for distribution and publishing. Apart from my interest in learning more about O'Reilly Media as an author, an advertisement in their booth caught me eye which I think is a really great move. When you buy Microsoft Press ebooks through the O'Reilly web site, you can receive it in any (or all) of the following formats where possible: PDF, epub, .mobi for Kindle and .apk for Android. You also have lifetime DRM-free access to the ebooks. As someone who is an avid collector of books, I fnd myself running out of room for storage. In addition, I travel a lot, and it's hard to lug my reference library with me. Today's e-reader options make the move to digital books a more viable way to grow my library. Having a variety of formats means I am not limited to a single device, and lifetime access means I don't have to worry about keeping track of where I've stored my files. Because the e-books are DRM-free, I can copy and paste when I'm compiling notes, and I can print pages when necessary. That's a winning combination in my mind! Overall, I was pleased with the BI conference. There were many more sessions that I couldn't attend, either because the room was full when I got there or there were multiple sessions running concurrently that I wanted to see. Fortunately, many of the sessions are accessible for viewing online at http://www.msteched.com/2010/NorthAmerica along with the TechEd sessions. You can spot the BI sessions by the yellow skyline on the title slide of the presentation as shown below. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • The Inkremental Architect&acute;s Napkin - #4 - Make increments tangible

    - by Ralf Westphal
    Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/06/12/the-inkremental-architectacutes-napkin---4---make-increments-tangible.aspxThe driver of software development are increments, small increments, tiny increments. With an increment being a slice of the overall requirement scope thin enough to implement and get feedback from a product owner within 2 days max. Such an increment might concern Functionality or Quality.[1] To make such high frequency delivery of increments possible, the transition from talking to coding needs to be as easy as possible. A user story or some other documentation of what´s supposed to get implemented until tomorrow evening at latest is one side of the medal. The other is where to put the logic in all of the code base. To implement an increment, only logic statements are needed. Functionality like Quality are just about expressions and control flow statements. Think of Assembler code without the CALL/RET instructions. That´s all is needed. Forget about functions, forget about classes. To make a user happy none of that is really needed. It´s just about the right expressions and conditional executions paths plus some memory allocation. Automatic function inlining of compilers which makes it clear how unimportant functions are for delivering value to users at runtime. But why then are there functions? Because they were invented for optimization purposes. We need them for better Evolvability and Production Efficiency. Nothing more, nothing less. No software has become faster, more secure, more scalable, more functional because we gathered logic under the roof of a function or two or a thousand. Functions make logic easier to understand. Functions make us faster in producing logic. Functions make it easier to keep logic consistent. Functions help to conserve memory. That said, functions are important. They are even the pivotal element of software development. We can´t code without them - whether you write a function yourself or not. Because there´s always at least one function in play: the Entry Point of a program. In Ruby the simplest program looks like this:puts "Hello, world!" In C# more is necessary:class Program { public static void Main () { System.Console.Write("Hello, world!"); } } C# makes the Entry Point function explicit, not so Ruby. But still it´s there. So you can think of logic always running in some function. Which brings me back to increments: In order to make the transition from talking to code as easy as possible, it has to be crystal clear into which function you should put the logic. Product owners might be content once there is a sticky note a user story on the Scrum or Kanban board. But developers need an idea of what that sticky note means in term of functions. Because with a function in hand, with a signature to run tests against, they have something to focus on. All´s well once there is a function behind whose signature logic can be piled up. Then testing frameworks can be used to check if the logic is correct. Then practices like TDD can help to drive the implementation. That´s why most code katas define exactly how the API of a solution should look like. It´s a function, maybe two or three, not more. A requirement like “Write a function f which takes this as parameters and produces such and such output by doing x” makes a developer comfortable. Yes, there are all kinds of details to think about, like which algorithm or technology to use, or what kind of state and side effects to consider. Even a single function not only must deliver on Functionality, but also on Quality and Evolvability. Nevertheless, once it´s clear which function to put logic in, you have a tangible starting point. So, yes, what I´m suggesting is to find a single function to put all the logic in that´s necessary to deliver on a the requirements of an increment. Or to put it the other way around: Slice requirements in a way that each increment´s logic can be located under the roof of a single function. Entry points Of course, the logic of a software will always be spread across many, many functions. But there´s always an Entry Point. That´s the most important function for each increment, because that´s the root to put integration or even acceptance tests on. A batch program like the above hello-world application only has a single Entry Point. All logic is reached from there, regardless how deep it´s nested in classes. But a program with a user interface like this has at least two Entry Points: One is the main function called upon startup. The other is the button click event handler for “Show my score”. But maybe there are even more, like another Entry Point being a handler for the event fired when one of the choices gets selected; because then some logic could check if the button should be enabled because all questions got answered. Or another Entry Point for the logic to be executed when the program is close; because then the choices made should be persisted. You see, an Entry Point to me is a function which gets triggered by the user of a software. With batch programs that´s the main function. With GUI programs on the desktop that´s event handlers. With web programs that´s handlers for URL routes. And my basic suggestion to help you with slicing requirements for Spinning is: Slice them in a way so that each increment is related to only one Entry Point function.[2] Entry Points are the “outer functions” of a program. That´s where the environment triggers behavior. That´s where hardware meets software. Entry points always get called because something happened to hardware state, e.g. a key was pressed, a mouse button clicked, the system timer ticked, data arrived over a wire.[3] Viewed from the outside, software is just a collection of Entry Point functions made accessible via buttons to press, menu items to click, gestures, URLs to open, keys to enter. Collections of batch processors I´d thus say, we haven´t moved forward since the early days of software development. We´re still writing batch programs. Forget about “event-driven programming” with its fancy GUI applications. Software is just a collection of batch processors. Earlier it was just one per program, today it´s hundreds we bundle up into applications. Each batch processor is represented by an Entry Point as its root that works on a number of resources from which it reads data to process and to which it writes results. These resources can be the keyboard or main memory or a hard disk or a communication line or a display. Together many batch processors - large and small - form applications the user perceives as a single whole: Software development that way becomes quite simple: just implement one batch processor after another. Well, at least in principle ;-) Features Each batch processor entered through an Entry Point delivers value to the user. It´s an increment. Sometimes its logic is trivial, sometimes it´s very complex. Regardless, each Entry Point represents an increment. An Entry Point implemented thus is a step forward in terms of Agility. At the same time it´s a tangible unit for developers. Therefore, identifying the more or less numerous batch processors in a software system is a rewarding task for product owners and developers alike. That´s where user stories meet code. In this example the user story translates to the Entry Point triggered by clicking the login button on a dialog like this: The batch then retrieves what has been entered via keyboard, loads data from a user store, and finally outputs some kind of response on the screen, e.g. by displaying an error message or showing the next dialog. This is all very simple, but you see, there is not just one thing happening, but several. Get input (email address, password) Load user for email address If user not found report error Check password Hash password Compare hash to hash stored in user Show next dialog Viewed from 10,000 feet it´s all done by the Entry Point function. And of course that´s technically possible. It´s just a bunch of logic and calling a couple of API functions. However, I suggest to take these steps as distinct aspects of the overall requirement described by the user story. Such aspects of requirements I call Features. Features too are increments. Each provides some (small) value of its own to the user. Each can be checked individually by a product owner. Instead of implementing all the logic behind the Login() entry point at once you can move forward increment by increment, e.g. First implement the dialog, let the user enter any credentials, and log him/her in without any checks. Features 1 and 4. Then hard code a single user and check the email address. Features 2 and 2.1. Then check password without hashing it (or use a very simple hash like the length of the password). Features 3. and 3.2 Replace hard coded user with a persistent user directoy, but a very simple one, e.g. a CSV file. Refinement of feature 2. Calculate the real hash for the password. Feature 3.1. Switch to the final user directory technology. Each feature provides an opportunity to deliver results in a short amount of time and get feedback. If you´re in doubt whether you can implement the whole entry point function until tomorrow night, then just go for a couple of features or even just one. That´s also why I think, you should strive for wrapping feature logic into a function of its own. It´s a matter of Evolvability and Production Efficiency. A function per feature makes the code more readable, since the language of requirements analysis and design is carried over into implementation. It makes it easier to apply changes to features because it´s clear where their logic is located. And finally, of course, it lets you re-use features in different context (read: increments). Feature functions make it easier for you to think of features as Spinning increments, to implement them independently, to let the product owner check them for acceptance individually. Increments consist of features, entry point functions consist of feature functions. So you can view software as a hierarchy of requirements from broad to thin which map to a hierarchy of functions - with entry points at the top.   I like this image of software as a self-similar structure on many levels of abstraction where requirements and code match each other. That to me is true agile design: the core tenet of Agility to move forward in increments is carried over into implementation. Increments on paper are retained in code. This way developers can easily relate to product owners. Elusive and fuzzy requirements are not tangible. Software production is moving forward through requirements one increment at a time, and one function at a time. In closing Product owners and developers are different - but they need to work together towards a shared goal: working software. So their notions of software need to be made compatible, they need to be connected. The increments of the product owner - user stories and features - need to be mapped straightforwardly to something which is relevant to developers. To me that´s functions. Yes, functions, not classes nor components nor micro services. We´re talking about behavior, actions, activities, processes. Their natural representation is a function. Something has to be done. Logic has to be executed. That´s the purpose of functions. Later, classes and other containers are needed to stay on top of a growing amount of logic. But to connect developers and product owners functions are the appropriate glue. Functions which represent increments. Can there always be such a small increment be found to deliver until tomorrow evening? I boldly say yes. Yes, it´s always possible. But maybe you´ve to start thinking differently. Maybe the product owner needs to start thinking differently. Completion is not the goal anymore. Neither is checking the delivery of an increment through the user interface of a software. Product owners need to become comfortable using test beds for certain features. If it´s hard to slice requirements thin enough for Spinning the reason is too little knowledge of something. Maybe you don´t yet understand the problem domain well enough? Maybe you don´t yet feel comfortable with some tool or technology? Then it´s time to acknowledge this fact. Be honest about your not knowing. And instead of trying to deliver as a craftsman officially become a researcher. Research an check back with the product owner every day - until your understanding has grown to a level where you are able to define the next Spinning increment. ? Sometimes even thin requirement slices will cover several Entry Points, like “Add validation of email addresses to all relevant dialogs.” Validation then will it put into a dozen functons. Still, though, it´s important to determine which Entry Points exactly get affected. That´s much easier, if strive for keeping the number of Entry Points per increment to 1. ? If you like call Entry Point functions event handlers, because that´s what they are. They all handle events of some kind, whether that´s palpable in your code or note. A public void btnSave_Click(object sender, EventArgs e) {…} might look like an event handler to you, but public static void Main() {…} is one also - for then event “program started”. ?

    Read the article

  • SQL Server &ndash; Undelete a Table and Restore a Single Table from Backup

    - by Mladen Prajdic
    This post is part of the monthly community event called T-SQL Tuesday started by Adam Machanic (blog|twitter) and hosted by someone else each month. This month the host is Sankar Reddy (blog|twitter) and the topic is Misconceptions in SQL Server. You can follow posts for this theme on Twitter by looking at #TSQL2sDay hashtag. Let me start by saying: This code is a crazy hack that is to never be used unless you really, really have to. Really! And I don’t think there’s a time when you would really have to use it for real. Because it’s a hack there are number of things that can go wrong so play with it knowing that. I’ve managed to totally corrupt one database. :) Oh… and for those saying: yeah yeah.. you have a single table in a file group and you’re restoring that, I say “nay nay” to you. As we all know SQL Server can’t do single table restores from backup. This is kind of a obvious thing due to different relational integrity (RI) concerns. Since we have to maintain that we have to restore all tables represented in a RI graph. For this exercise i say BAH! to those concerns. Note that this method “works” only for simple tables that don’t have LOB and off rows data. The code can be expanded to include those but I’ve tried to leave things “simple”. Note that for this to work our table needs to be relatively static data-wise. This doesn’t work for OLTP table. Products are a perfect example of static data. They don’t change much between backups, pretty much everything depends on them and their table is one of those tables that are relatively easy to accidentally delete everything from. This only works if the database is in Full or Bulk-Logged recovery mode for tables where the contents have been deleted or truncated but NOT when a table was dropped. Everything we’ll talk about has to be done before the data pages are reused for other purposes. After deletion or truncation the pages are marked as reusable so you have to act fast. The best thing probably is to put the database into single user mode ASAP while you’re performing this procedure and return it to multi user after you’re done. How do we do it? We will be using an undocumented but known DBCC commands: DBCC PAGE, an undocumented function sys.fn_dblog and a little known DATABASE RESTORE PAGE option. All tests will be on a copy of Production.Product table in AdventureWorks database called Production.Product1 because the original table has FK constraints that prevent us from truncating it for testing. -- create a duplicate table. This doesn't preserve indexes!SELECT *INTO AdventureWorks.Production.Product1FROM AdventureWorks.Production.Product   After we run this code take a full back to perform further testing.   First let’s see what the difference between DELETE and TRUNCATE is when it comes to logging. With DELETE every row deletion is logged in the transaction log. With TRUNCATE only whole data page deallocations are logged in the transaction log. Getting deleted data pages is simple. All we have to look for is row delete entry in the sys.fn_dblog output. But getting data pages that were truncated from the transaction log presents a bit of an interesting problem. I will not go into depths of IAM(Index Allocation Map) and PFS (Page Free Space) pages but suffice to say that every IAM page has intervals that tell us which data pages are allocated for a table and which aren’t. If we deep dive into the sys.fn_dblog output we can see that once you truncate a table all the pages in all the intervals are deallocated and this is shown in the PFS page transaction log entry as deallocation of pages. For every 8 pages in the same extent there is one PFS page row in the transaction log. This row holds information about all 8 pages in CSV format which means we can get to this data with some parsing. A great help for parsing this stuff is Peter Debetta’s handy function dbo.HexStrToVarBin that converts hexadecimal string into a varbinary value that can be easily converted to integer tus giving us a readable page number. The shortened (columns removed) sys.fn_dblog output for a PFS page with CSV data for 1 extent (8 data pages) looks like this: -- [Page ID] is displayed in hex format. -- To convert it to readable int we'll use dbo.HexStrToVarBin function found at -- http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx -- This function must be installed in the master databaseSELECT Context, AllocUnitName, [Page ID], DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE [Current LSN] = '00000031:00000a46:007d' The pages at the end marked with 0x00—> are pages that are allocated in the extent but are not part of a table. We can inspect the raw content of each data page with a DBCC PAGE command: -- we need this trace flag to redirect output to the query window.DBCC TRACEON (3604); -- WITH TABLERESULTS gives us data in table format instead of message format-- we use format option 3 because it's the easiest to read and manipulate further onDBCC PAGE (AdventureWorks, 1, 613, 3) WITH TABLERESULTS   Since the DBACC PAGE output can be quite extensive I won’t put it here. You can see an example of it in the link at the beginning of this section. Getting deleted data back When we run a delete statement every row to be deleted is marked as a ghost record. A background process periodically cleans up those rows. A huge misconception is that the data is actually removed. It’s not. Only the pointers to the rows are removed while the data itself is still on the data page. We just can’t access it with normal means. To get those pointers back we need to restore every deleted page using the RESTORE PAGE option mentioned above. This restore must be done from a full backup, followed by any differential and log backups that you may have. This is necessary to bring the pages up to the same point in time as the rest of the data.  However the restore doesn’t magically connect the restored page back to the original table. It simply replaces the current page with the one from the backup. After the restore we use the DBCC PAGE to read data directly from all data pages and insert that data into a temporary table. To finish the RESTORE PAGE  procedure we finally have to take a tail log backup (simple backup of the transaction log) and restore it back. We can now insert data from the temporary table to our original table by hand. Getting truncated data back When we run a truncate the truncated data pages aren’t touched at all. Even the pointers to rows stay unchanged. Because of this getting data back from truncated table is simple. we just have to find out which pages belonged to our table and use DBCC PAGE to read data off of them. No restore is necessary. Turns out that the problems we had with finding the data pages is alleviated by not having to do a RESTORE PAGE procedure. Stop stalling… show me The Code! This is the code for getting back deleted and truncated data back. It’s commented in all the right places so don’t be afraid to take a closer look. Make sure you have a full backup before trying this out. Also I suggest that the last step of backing and restoring the tail log is performed by hand. USE masterGOIF OBJECT_ID('dbo.HexStrToVarBin') IS NULL RAISERROR ('No dbo.HexStrToVarBin installed. Go to http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx and install it in master database' , 18, 1) SET NOCOUNT ONBEGIN TRY DECLARE @dbName VARCHAR(1000), @schemaName VARCHAR(1000), @tableName VARCHAR(1000), @fullBackupName VARCHAR(1000), @undeletedTableName VARCHAR(1000), @sql VARCHAR(MAX), @tableWasTruncated bit; /* THE FIRST LINE ARE OUR INPUT PARAMETERS In this case we're trying to recover Production.Product1 table in AdventureWorks database. My full backup of AdventureWorks database is at e:\AW.bak */ SELECT @dbName = 'AdventureWorks', @schemaName = 'Production', @tableName = 'Product1', @fullBackupName = 'e:\AW.bak', @undeletedTableName = '##' + @tableName + '_Undeleted', @tableWasTruncated = 0, -- copy the structure from original table to a temp table that we'll fill with restored data @sql = 'IF OBJECT_ID(''tempdb..' + @undeletedTableName + ''') IS NOT NULL DROP TABLE ' + @undeletedTableName + ' SELECT *' + ' INTO ' + @undeletedTableName + ' FROM [' + @dbName + '].[' + @schemaName + '].[' + @tableName + ']' + ' WHERE 1 = 0' EXEC (@sql) IF OBJECT_ID('tempdb..#PagesToRestore') IS NOT NULL DROP TABLE #PagesToRestore /* FIND DATA PAGES WE NEED TO RESTORE*/ CREATE TABLE #PagesToRestore ([ID] INT IDENTITY(1,1), [FileID] INT, [PageID] INT, [SQLtoExec] VARCHAR(1000)) -- DBCC PACE statement to run later RAISERROR ('Looking for deleted pages...', 10, 1) -- use T-LOG direct read to get deleted data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) EXEC('USE [' + @dbName + '];SELECT FileID, PageID, ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), ' + 'CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageIDFROM sys.fn_dblog(NULL, NULL)WHERE AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'' ' + 'AND Context IN (''LCX_MARK_AS_GHOST'', ''LCX_HEAP'') AND Operation in (''LOP_DELETE_ROWS''))t');SELECT *FROM #PagesToRestore -- if upper EXEC returns 0 rows it means the table was truncated so find truncated pages IF (SELECT COUNT(*) FROM #PagesToRestore) = 0 BEGIN RAISERROR ('No deleted pages found. Looking for truncated pages...', 10, 1) -- use T-LOG read to get truncated data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) -- dark magic happens here -- because truncation simply deallocates pages we have to find out which pages were deallocated. -- we can find this out by looking at the PFS page row's Description column. -- for every deallocated extent the Description has a CSV of 8 pages in that extent. -- then it's just a matter of parsing it. -- we also remove the pages in the extent that weren't allocated to the table itself -- marked with '0x00-->00' EXEC ('USE [' + @dbName + '];DECLARE @truncatedPages TABLE(DeallocatedPages VARCHAR(8000), IsMultipleDeallocs BIT);INSERT INTO @truncatedPagesSELECT REPLACE(REPLACE(Description, ''Deallocated '', ''Y''), ''0x00-->00 '', ''N'') + '';'' AS DeallocatedPages, CHARINDEX('';'', Description) AS IsMultipleDeallocsFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageID, DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE Context IN (''LCX_PFS'') AND Description LIKE ''Deallocated%'' AND AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'') t;SELECT FileID, PageID , ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT LEFT(PageAndFile, 1) as WasPageAllocatedToTable , SUBSTRING(PageAndFile, 2, CHARINDEX('':'', PageAndFile) - 2 ) as FileID , CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING(PageAndFile, CHARINDEX('':'', PageAndFile) + 1, LEN(PageAndFile))))) as PageIDFROM ( SELECT SUBSTRING(DeallocatedPages, delimPosStart, delimPosEnd - delimPosStart) as PageAndFile, IsMultipleDeallocs FROM ( SELECT *, CHARINDEX('';'', DeallocatedPages)*(N-1) + 1 AS delimPosStart, CHARINDEX('';'', DeallocatedPages)*N AS delimPosEnd FROM @truncatedPages t1 CROSS APPLY (SELECT TOP (case when t1.IsMultipleDeallocs = 1 then 8 else 1 end) ROW_NUMBER() OVER(ORDER BY number) as N FROM master..spt_values) t2 )t)t)tWHERE WasPageAllocatedToTable = ''Y''') SELECT @tableWasTruncated = 1 END DECLARE @lastID INT, @pagesCount INT SELECT @lastID = 1, @pagesCount = COUNT(*) FROM #PagesToRestore SELECT @sql = 'Number of pages to restore: ' + CONVERT(VARCHAR(10), @pagesCount) IF @pagesCount = 0 RAISERROR ('No data pages to restore.', 18, 1) ELSE RAISERROR (@sql, 10, 1) -- If the table was truncated we'll read the data directly from data pages without restoring from backup IF @tableWasTruncated = 0 BEGIN -- RESTORE DATA PAGES FROM FULL BACKUP IN BATCHES OF 200 WHILE @lastID <= @pagesCount BEGIN -- create CSV string of pages to restore SELECT @sql = STUFF((SELECT ',' + CONVERT(VARCHAR(100), FileID) + ':' + CONVERT(VARCHAR(100), PageID) FROM #PagesToRestore WHERE ID BETWEEN @lastID AND @lastID + 200 ORDER BY ID FOR XML PATH('')), 1, 1, '') SELECT @sql = 'RESTORE DATABASE [' + @dbName + '] PAGE = ''' + @sql + ''' FROM DISK = ''' + @fullBackupName + '''' RAISERROR ('Starting RESTORE command:' , 10, 1) WITH NOWAIT; RAISERROR (@sql , 10, 1) WITH NOWAIT; EXEC(@sql); RAISERROR ('Restore DONE' , 10, 1) WITH NOWAIT; SELECT @lastID = @lastID + 200 END /* If you have any differential or transaction log backups you should restore them here to bring the previously restored data pages up to date */ END DECLARE @dbccSinglePage TABLE ( [ParentObject] NVARCHAR(500), [Object] NVARCHAR(500), [Field] NVARCHAR(500), [VALUE] NVARCHAR(MAX) ) DECLARE @cols NVARCHAR(MAX), @paramDefinition NVARCHAR(500), @SQLtoExec VARCHAR(1000), @FileID VARCHAR(100), @PageID VARCHAR(100), @i INT = 1 -- Get deleted table columns from information_schema view -- Need sp_executeSQL because database name can't be passed in as variable SELECT @cols = 'select @cols = STUFF((SELECT '', ['' + COLUMN_NAME + '']''FROM ' + @dbName + '.INFORMATION_SCHEMA.COLUMNSWHERE TABLE_NAME = ''' + @tableName + ''' AND TABLE_SCHEMA = ''' + @schemaName + '''ORDER BY ORDINAL_POSITIONFOR XML PATH('''')), 1, 2, '''')', @paramDefinition = N'@cols nvarchar(max) OUTPUT' EXECUTE sp_executesql @cols, @paramDefinition, @cols = @cols OUTPUT -- Loop through all the restored data pages, -- read data from them and insert them into temp table -- which you can then insert into the orignial deleted table DECLARE dbccPageCursor CURSOR GLOBAL FORWARD_ONLY FOR SELECT [FileID], [PageID], [SQLtoExec] FROM #PagesToRestore ORDER BY [FileID], [PageID] OPEN dbccPageCursor; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; WHILE @@FETCH_STATUS = 0 BEGIN RAISERROR ('---------------------------------------------', 10, 1) WITH NOWAIT; SELECT @sql = 'Loop iteration: ' + CONVERT(VARCHAR(10), @i); RAISERROR (@sql, 10, 1) WITH NOWAIT; SELECT @sql = 'Running: ' + @SQLtoExec RAISERROR (@sql, 10, 1) WITH NOWAIT; -- if something goes wrong with DBCC execution or data gathering, skip it but print error BEGIN TRY INSERT INTO @dbccSinglePage EXEC (@SQLtoExec) -- make the data insert magic happen here IF (SELECT CONVERT(BIGINT, [VALUE]) FROM @dbccSinglePage WHERE [Field] LIKE '%Metadata: ObjectId%') = OBJECT_ID('['+@dbName+'].['+@schemaName +'].['+@tableName+']') BEGIN DELETE @dbccSinglePage WHERE NOT ([ParentObject] LIKE 'Slot % Offset %' AND [Object] LIKE 'Slot % Column %') SELECT @sql = 'USE tempdb; ' + 'IF (OBJECTPROPERTY(object_id(''' + @undeletedTableName + '''), ''TableHasIdentity'') = 1) ' + 'SET IDENTITY_INSERT ' + @undeletedTableName + ' ON; ' + 'INSERT INTO ' + @undeletedTableName + '(' + @cols + ') ' + STUFF((SELECT ' UNION ALL SELECT ' + STUFF((SELECT ', ' + CASE WHEN VALUE = '[NULL]' THEN 'NULL' ELSE '''' + [VALUE] + '''' END FROM ( -- the unicorn help here to correctly set ordinal numbers of columns in a data page -- it's turning STRING order into INT order (1,10,11,2,21 into 1,2,..10,11...21) SELECT [ParentObject], [Object], Field, VALUE, RIGHT('00000' + O1, 6) AS ParentObjectOrder, RIGHT('00000' + REVERSE(LEFT(O2, CHARINDEX(' ', O2)-1)), 6) AS ObjectOrder FROM ( SELECT [ParentObject], [Object], Field, VALUE, REPLACE(LEFT([ParentObject], CHARINDEX('Offset', [ParentObject])-1), 'Slot ', '') AS O1, REVERSE(LEFT([Object], CHARINDEX('Offset ', [Object])-2)) AS O2 FROM @dbccSinglePage WHERE t.ParentObject = ParentObject )t)t ORDER BY ParentObjectOrder, ObjectOrder FOR XML PATH('')), 1, 2, '') FROM @dbccSinglePage t GROUP BY ParentObject FOR XML PATH('') ), 1, 11, '') + ';' RAISERROR (@sql, 10, 1) WITH NOWAIT; EXEC (@sql) END END TRY BEGIN CATCH SELECT @sql = 'ERROR!!!' + CHAR(10) + CHAR(13) + 'ErrorNumber: ' + ERROR_NUMBER() + '; ErrorMessage' + ERROR_MESSAGE() + CHAR(10) + CHAR(13) + 'FileID: ' + @FileID + '; PageID: ' + @PageID RAISERROR (@sql, 10, 1) WITH NOWAIT; END CATCH DELETE @dbccSinglePage SELECT @sql = 'Pages left to process: ' + CONVERT(VARCHAR(10), @pagesCount - @i) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13), @i = @i+1 RAISERROR (@sql, 10, 1) WITH NOWAIT; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; END CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; EXEC ('SELECT ''' + @undeletedTableName + ''' as TableName; SELECT * FROM ' + @undeletedTableName)END TRYBEGIN CATCH SELECT ERROR_NUMBER() AS ErrorNumber, ERROR_MESSAGE() AS ErrorMessage IF CURSOR_STATUS ('global', 'dbccPageCursor') >= 0 BEGIN CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; ENDEND CATCH-- if the table was deleted we need to finish the restore page sequenceIF @tableWasTruncated = 0BEGIN -- take a log tail backup and then restore it to complete page restore process DECLARE @currentDate VARCHAR(30) SELECT @currentDate = CONVERT(VARCHAR(30), GETDATE(), 112) RAISERROR ('Starting Log Tail backup to c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail backup done.', 10, 1) WITH NOWAIT; RAISERROR ('Starting Log Tail restore from c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail restore done.', 10, 1) WITH NOWAIT;END-- The last step is manual. Insert data from our temporary table to the original deleted table The misconception here is that you can do a single table restore properly in SQL Server. You can't. But with little experimentation you can get pretty close to it. One way to possible remove a dependency on a backup to retrieve deleted pages is to quickly run a similar script to the upper one that gets data directly from data pages while the rows are still marked as ghost records. It could be done if we could beat the ghost record cleanup task.

    Read the article

  • Inside the Concurrent Collections: ConcurrentDictionary

    - by Simon Cooper
    Using locks to implement a thread-safe collection is rather like using a sledgehammer - unsubtle, easy to understand, and tends to make any other tool redundant. Unlike the previous two collections I looked at, ConcurrentStack and ConcurrentQueue, ConcurrentDictionary uses locks quite heavily. However, it is careful to wield locks only where necessary to ensure that concurrency is maximised. This will, by necessity, be a higher-level look than my other posts in this series, as there is quite a lot of code and logic in ConcurrentDictionary. Therefore, I do recommend that you have ConcurrentDictionary open in a decompiler to have a look at all the details that I skip over. The problem with locks There's several things to bear in mind when using locks, as encapsulated by the lock keyword in C# and the System.Threading.Monitor class in .NET (if you're unsure as to what lock does in C#, I briefly covered it in my first post in the series): Locks block threads The most obvious problem is that threads waiting on a lock can't do any work at all. No preparatory work, no 'optimistic' work like in ConcurrentQueue and ConcurrentStack, nothing. It sits there, waiting to be unblocked. This is bad if you're trying to maximise concurrency. Locks are slow Whereas most of the methods on the Interlocked class can be compiled down to a single CPU instruction, ensuring atomicity at the hardware level, taking out a lock requires some heavy lifting by the CLR and the operating system. There's quite a bit of work required to take out a lock, block other threads, and wake them up again. If locks are used heavily, this impacts performance. Deadlocks When using locks there's always the possibility of a deadlock - two threads, each holding a lock, each trying to aquire the other's lock. Fortunately, this can be avoided with careful programming and structured lock-taking, as we'll see. So, it's important to minimise where locks are used to maximise the concurrency and performance of the collection. Implementation As you might expect, ConcurrentDictionary is similar in basic implementation to the non-concurrent Dictionary, which I studied in a previous post. I'll be using some concepts introduced there, so I recommend you have a quick read of it. So, if you were implementing a thread-safe dictionary, what would you do? The naive implementation is to simply have a single lock around all methods accessing the dictionary. This would work, but doesn't allow much concurrency. Fortunately, the bucketing used by Dictionary allows a simple but effective improvement to this - one lock per bucket. This allows different threads modifying different buckets to do so in parallel. Any thread making changes to the contents of a bucket takes the lock for that bucket, ensuring those changes are thread-safe. The method that maps each bucket to a lock is the GetBucketAndLockNo method: private void GetBucketAndLockNo( int hashcode, out int bucketNo, out int lockNo, int bucketCount) { // the bucket number is the hashcode (without the initial sign bit) // modulo the number of buckets bucketNo = (hashcode & 0x7fffffff) % bucketCount; // and the lock number is the bucket number modulo the number of locks lockNo = bucketNo % m_locks.Length; } However, this does require some changes to how the buckets are implemented. The 'implicit' linked list within a single backing array used by the non-concurrent Dictionary adds a dependency between separate buckets, as every bucket uses the same backing array. Instead, ConcurrentDictionary uses a strict linked list on each bucket: This ensures that each bucket is entirely separate from all other buckets; adding or removing an item from a bucket is independent to any changes to other buckets. Modifying the dictionary All the operations on the dictionary follow the same basic pattern: void AlterBucket(TKey key, ...) { int bucketNo, lockNo; 1: GetBucketAndLockNo( key.GetHashCode(), out bucketNo, out lockNo, m_buckets.Length); 2: lock (m_locks[lockNo]) { 3: Node headNode = m_buckets[bucketNo]; 4: Mutate the node linked list as appropriate } } For example, when adding another entry to the dictionary, you would iterate through the linked list to check whether the key exists already, and add the new entry as the head node. When removing items, you would find the entry to remove (if it exists), and remove the node from the linked list. Adding, updating, and removing items all follow this pattern. Performance issues There is a problem we have to address at this point. If the number of buckets in the dictionary is fixed in the constructor, then the performance will degrade from O(1) to O(n) when a large number of items are added to the dictionary. As more and more items get added to the linked lists in each bucket, the lookup operations will spend most of their time traversing a linear linked list. To fix this, the buckets array has to be resized once the number of items in each bucket has gone over a certain limit. (In ConcurrentDictionary this limit is when the size of the largest bucket is greater than the number of buckets for each lock. This check is done at the end of the TryAddInternal method.) Resizing the bucket array and re-hashing everything affects every bucket in the collection. Therefore, this operation needs to take out every lock in the collection. Taking out mutiple locks at once inevitably summons the spectre of the deadlock; two threads each hold a lock, and each trying to acquire the other lock. How can we eliminate this? Simple - ensure that threads never try to 'swap' locks in this fashion. When taking out multiple locks, always take them out in the same order, and always take out all the locks you need before starting to release them. In ConcurrentDictionary, this is controlled by the AcquireLocks, AcquireAllLocks and ReleaseLocks methods. Locks are always taken out and released in the order they are in the m_locks array, and locks are all released right at the end of the method in a finally block. At this point, it's worth pointing out that the locks array is never re-assigned, even when the buckets array is increased in size. The number of locks is fixed in the constructor by the concurrencyLevel parameter. This simplifies programming the locks; you don't have to check if the locks array has changed or been re-assigned before taking out a lock object. And you can be sure that when a thread takes out a lock, another thread isn't going to re-assign the lock array. This would create a new series of lock objects, thus allowing another thread to ignore the existing locks (and any threads controlling them), breaking thread-safety. Consequences of growing the array Just because we're using locks doesn't mean that race conditions aren't a problem. We can see this by looking at the GrowTable method. The operation of this method can be boiled down to: private void GrowTable(Node[] buckets) { try { 1: Acquire first lock in the locks array // this causes any other thread trying to take out // all the locks to block because the first lock in the array // is always the one taken out first // check if another thread has already resized the buckets array // while we were waiting to acquire the first lock 2: if (buckets != m_buckets) return; 3: Calculate the new size of the backing array 4: Node[] array = new array[size]; 5: Acquire all the remaining locks 6: Re-hash the contents of the existing buckets into array 7: m_buckets = array; } finally { 8: Release all locks } } As you can see, there's already a check for a race condition at step 2, for the case when the GrowTable method is called twice in quick succession on two separate threads. One will successfully resize the buckets array (blocking the second in the meantime), when the second thread is unblocked it'll see that the array has already been resized & exit without doing anything. There is another case we need to consider; looking back at the AlterBucket method above, consider the following situation: Thread 1 calls AlterBucket; step 1 is executed to get the bucket and lock numbers. Thread 2 calls GrowTable and executes steps 1-5; thread 1 is blocked when it tries to take out the lock in step 2. Thread 2 re-hashes everything, re-assigns the buckets array, and releases all the locks (steps 6-8). Thread 1 is unblocked and continues executing, but the calculated bucket and lock numbers are no longer valid. Between calculating the correct bucket and lock number and taking out the lock, another thread has changed where everything is. Not exactly thread-safe. Well, a similar problem was solved in ConcurrentStack and ConcurrentQueue by storing a local copy of the state, doing the necessary calculations, then checking if that state is still valid. We can use a similar idea here: void AlterBucket(TKey key, ...) { while (true) { Node[] buckets = m_buckets; int bucketNo, lockNo; GetBucketAndLockNo( key.GetHashCode(), out bucketNo, out lockNo, buckets.Length); lock (m_locks[lockNo]) { // if the state has changed, go back to the start if (buckets != m_buckets) continue; Node headNode = m_buckets[bucketNo]; Mutate the node linked list as appropriate } break; } } TryGetValue and GetEnumerator And so, finally, we get onto TryGetValue and GetEnumerator. I've left these to the end because, well, they don't actually use any locks. How can this be? Whenever you change a bucket, you need to take out the corresponding lock, yes? Indeed you do. However, it is important to note that TryGetValue and GetEnumerator don't actually change anything. Just as immutable objects are, by definition, thread-safe, read-only operations don't need to take out a lock because they don't change anything. All lockless methods can happily iterate through the buckets and linked lists without worrying about locking anything. However, this does put restrictions on how the other methods operate. Because there could be another thread in the middle of reading the dictionary at any time (even if a lock is taken out), the dictionary has to be in a valid state at all times. Every change to state has to be made visible to other threads in a single atomic operation (all relevant variables are marked volatile to help with this). This restriction ensures that whatever the reading threads are doing, they never read the dictionary in an invalid state (eg items that should be in the collection temporarily removed from the linked list, or reading a node that has had it's key & value removed before the node itself has been removed from the linked list). Fortunately, all the operations needed to change the dictionary can be done in that way. Bucket resizes are made visible when the new array is assigned back to the m_buckets variable. Any additions or modifications to a node are done by creating a new node, then splicing it into the existing list using a single variable assignment. Node removals are simply done by re-assigning the node's m_next pointer. Because the dictionary can be changed by another thread during execution of the lockless methods, the GetEnumerator method is liable to return dirty reads - changes made to the dictionary after GetEnumerator was called, but before the enumeration got to that point in the dictionary. It's worth listing at this point which methods are lockless, and which take out all the locks in the dictionary to ensure they get a consistent view of the dictionary: Lockless: TryGetValue GetEnumerator The indexer getter ContainsKey Takes out every lock (lockfull?): Count IsEmpty Keys Values CopyTo ToArray Concurrent principles That covers the overall implementation of ConcurrentDictionary. I haven't even begun to scratch the surface of this sophisticated collection. That I leave to you. However, we've looked at enough to be able to extract some useful principles for concurrent programming: Partitioning When using locks, the work is partitioned into independant chunks, each with its own lock. Each partition can then be modified concurrently to other partitions. Ordered lock-taking When a method does need to control the entire collection, locks are taken and released in a fixed order to prevent deadlocks. Lockless reads Read operations that don't care about dirty reads don't take out any lock; the rest of the collection is implemented so that any reading thread always has a consistent view of the collection. That leads us to the final collection in this little series - ConcurrentBag. Lacking a non-concurrent analogy, it is quite different to any other collection in the class libraries. Prepare your thinking hats!

    Read the article

  • AIX Checklist for stable obiee deployment

    - by user554629
    Common AIX configuration issues     ( last updated 27 Aug 2012 ) OBIEE is a complicated system with many moving parts and connection points.The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators. The information in this article is time sensitive, and updated as I discover new  issues or details. What makes OBIEE different? When Tech Support suggests AIX component upgrades to a stable, locked-down production AIX environment, it is common to get "push back".  "Why is this necessary?  We aren't we seeing issues with other software?"It's a fair question that I have often struggled to answer; here are the talking points: OBIEE is memory intensive.  It is the entire purpose of the software to trade memory for repetitive, more expensive database requests across a network. OBIEE is implemented in C++ and is very dependent on the C++ runtime to behave correctly. OBIEE is aggressively thread efficient;  if atomic operations on a particular architecture do not work correctly, the software crashes. OBIEE dynamically loads third-party database client libraries directly into the nqsserver process.  If the library is not thread-safe, or corrupts process memory the OBIEE crash happens in an unrelated part of the code.  These are extremely difficult bugs to find. OBIEE software uses 99% common source across multiple platforms:  Windows, Linux, AIX, Solaris and HPUX.  If a crash happens on only one platform, we begin to suspect other factors.  load intensity, system differences, configuration choices, hardware failures.  It is rare to have a single product require so many diverse technical skills.   My role in support is to understand system configurations, performance issues, and crashes.   An analyst trained in Business Analytics can't be expected to know AIX internals in the depth required to make configuration choices.  Here are some guidelines. AIX C++ Runtime must be at  version 11.1.0.4$ lslpp -L | grep xlC.aixobiee software will crash if xlC.aix.rte is downlevel;  this is not a "try it" suggestion.Nov 2011 11.1.0.4 version  is appropriate for all AIX versions ( 5, 6, 7 )Download from here:https://www-304.ibm.com/support/docview.wss?uid=swg24031426 No reboot is necessary to install, it can even be installed while applications are using the current version.Restart the apps, and they will pick up the latest version. AIX 5.3 Technology Level 12 is required when running on Power5,6,7 processorsAIX 6.1 was introduced with the newer Power chips, and we have seen no issues with 6.1 or 7.1 versions.Customers with an unstable deployment, dozens of unexplained crashes, became stable after the upgrade.If your AIX system is 5.3, the minimum TL level should be at or higher than this:$ oslevel -s  5300-12-03-1107IBM typically supports only the two latest versions of AIX ( 6.1 and 7.1, for example).  AIX 5.3 is still supported and popular running in an LPAR. obiee userid limits$ ulimit -Ha  ( hard limits )$ ulimit -a   ( default limits )core file size (blocks)     unlimiteddata seg size (kbytes)      unlimitedfile size (blocks)          unlimitedmax memory size (kbytes)    unlimitedopen files                  10240 cpu time (seconds)          unlimitedvirtual memory (kbytes)     unlimitedIt is best to establish the values in /etc/security/limitsroot user is needed to observe and modify this file.If you modify a limit, you will need to relog in to change it again.  For example,$ ulimit -c 0$ ulimit -c 2097151cannot modify limit: Operation not permitted$ ulimit -c unlimited$ ulimit -c0There are only two meaningful values for ulimit -c ; zero or unlimited.Anything else is likely to produce a truncated core file that cannot be analyzed. Deploy 32-bit or 64-bit ?Early versions of OBIEE offered 32-bit or 64-bit choice to AIX customers.The 32-bit choice was needed if a database vendor did not supply a 64-bit client library.That's no longer an issue and beginning with OBIEE 11, 32-bit code is no longer shipped.A common error that leads to "out of memory" conditions to to accept the 32-bit memory configuration choices on 64-bit deployments.  The significant configuration choices are: Maximum process data (heap) size is in an AIX environment variableLDR_CNTRL=IGNOREUNLOAD@LOADPUBLIC@PREREAD_SHLIB@MAXDATA=0x... Two thread stack sizes are made in obiee NQSConfig.INI[ SERVER ]SERVER_THREAD_STACK_SIZE = 0;DB_GATEWAY_THREAD_STACK_SIZE = 0; Sort memory in NQSConfig.INI[ GENERAL ]SORT_MEMORY_SIZE = 4 MB ;SORT_BUFFER_INCREMENT_SIZE = 256 KB ; Choosing a value for MAXDATA:0x080000000  2GB Default maximum 32-bit heap size ( 8 with 7 zeros )0x100000000  4GB 64-bit breaking even with 32-bit ( 1 with 8 zeros )0x200000000  8GB 64-bit double 32-bit max0x400000000 16GB 64-bit safetyUsing 2GB heap size for a 64-bit process will almost certainly lead to an out-of-memory situation.Registers are twice as big ... consume twice as much memory in the heap.Upgrading to a 4GB heap for a 64-bit process is just "breaking even" with 32-bit.A 32-bit process is constrained by the 32-bit virtual addressing limits.  Heap memory is used for dynamic requirements of obiee software, thread stacks for each of the configured threads, and sometimes for shared libraries. 64-bit processes are not constrained in this way;  extra heap space can be configured for safety against a query that might create a sudden requirement for excessive storage.  If the storage is not available, this query might crash the whole server and disrupt existing users.There is no performance penalty on AIX for configuring more memory than required;  extra memory can be configured for safety.  If there are no other considerations, start with 8GB.Choosing a value for Thread Stack size:zero is the value documented to select an appropriate default for thread stack size.  My preference is to change this to an absolute value, even if you intend to use the documented default;  it provides better documentation and removes the "surprise" factor.There are two thread types that can be configured. GATEWAY is used by a thread pool to call a database client library to establish a DB connection.The default size is 256KB;  many customers raise this to 512KB ( no performance penalty for over-configuring ). This value must be set to 1 MB if Teradata connections are used. SERVER threads are used to run queries.  OBIEE uses recursive algorithms during the analysis of query structures which can consume significant thread stack storage.  It's difficult to provide guidance on a value that depends on data and complexity.  The general notion is to provide more space than you think you need,  "double down" and increase the value if you run out, otherwise inspect the query to understand why it is too complex for the thread stack.  There are protections built into the software to abort a single user query that is too complex, but the algorithms don't cover all situations.256 KB  The default 32-bit stack size.  Many customers increased this to 512KB on 32-bit.  A 64-bit server is very likely to crash with this value;  the stack contains mostly register values, which are twice as big.512 KB  The documented 64-bit default.  Some early releases of obiee didn't set this correctly, resulting in 256KB stacks.1 MB  The recommended 64-bit setting.  If your system only ever uses 512KB of stack space, there is no performance penalty for using 1MB stack size.2 MB  Many large customers use this value for safety.  No performance penalty.nqscheduler does not use the NQSConfig.INI file to set thread stack size.If this process crashes because the thread stack is too small, use this to set 2MB:export OBI_BACKGROUND_STACK_SIZE=2048 Shared libraries are not (shared) When application libraries are loaded at run-time, AIX makes a decision on whether to load the libraries in a "public" memory segment.  If the filesystem library permissions do not have the "Read-Other" permission bit, AIX loads the library into private process memory with two significant side-effects:* The libraries reduce the heap storage available.      Might be significant in 32-bit processes;  irrelevant in 64-bit processes.* Library code is loaded into multiple real pages for execution;  one copy for each process.Multiple execution images is a significant issue for both 32- and 64-bit processes.The "real memory pages" saved by using public memory segments is a minor concern.  Today's machines typically have plenty of real memory.The real problem with private copies of libraries is that they consume processor cache blocks, which are limited.   The same library instructions executing in different real pages will cause memory delays as the i-cache ( instruction cache 128KB blocks) are refreshed from real memory.   Performance loss because instructions are delayed is something that is difficult to measure without access to low-level cache fault data.   The machine just appears to be running slowly for no observable reason.This is an easy problem to detect, and an easy problem to correct.Detection:  "genld -l" AIX command produces a list of the libraries used by each process and the AIX memory address where they are loaded.32-bit public segment is 13 ( "dxxxxxxx" ).   private segments are 2-a.64-bit public segment is 9 ( "9xxxxxxxxxxxxxxx") ; private segment is 8.genld -l | grep -v ' d| 9' | sort +2provides a list of privately loaded libraries. Repair: chmod o+r <libname>AIX shared libraries will have a suffix of ".so" or ".a".Another technique is to change all libraries in a selected directory to repair those that might not be currently loaded.   The usual directories that need repair are obiee code, httpd code and plugins, database client libraries and java.chmod o+r /shr/dir/*.a /shr/dir/*.so Configure your system for diagnosticsProduction systems shouldn't crash, and yet bad things happen to good software.If obiee software crashes and produces a core, you should configure your system for reliable transfer of the failing conditions to Oracle Tech Support.  Here's what we need to be able to diagnose a core file from your system.* fullcore enabled. chdev -lsys0 -a fullcore=true* core naming enabled. chcore -n on -d* ulimit must not truncate core. see item 3.* pstack.sh is used to capture core documentation.* obidoc is used to capture current AIX configuration.* snapcore  AIX utility captures core and libraries. Use the proper syntax. $ snapcore -r corename executable-fullpath   /tmp/snapcore will contain the .pax.Z output file.  It is compressed.* If cores are directed to a common directory, ensure obiee userid can write to the directory.  ( chcore -p /cores -d ; chmod 777 /cores )The filesystem must have sufficient space to hold a crashing obiee application.Use:  df -k  Check the "Free" column ( not "% Used" )  8388608 is 8GB. Disable Oracle Client Library signal handlingThe Oracle DB Client Library is frequently distributed with the sqlplus development kit.By default, the library enables a signal handler, which will document a call stack if the application crashes.   The signal handler is not needed, and definitely disruptive to obiee diagnostics.   It needs to be disabled.   sqlnet.ora is typically located at:   $ORACLE_HOME/network/admin/sqlnet.oraAdd this line at the top of the file:   DIAG_SIGHANDLER_ENABLED=FALSE Disable async query in the RPD connection pool.This might be an obiee 10.1.3.4 issue only ( still checking  )."async query" must be disabled in the connection pools.It was designed to enable query cancellation to a database, and turned out to have too many edge conditions in normal communication that produced random corruption of data and crashes.  Please ensure it is turned off in the RPD. Check AIX error report (errpt).Errors external to obiee applications can trigger crashes.  $ /bin/errpt -aHardware errors ( firmware, adapters, disks ) should be reported to IBM support.All application core files are recorded by AIX;  the most recent ones are listed first. Reserved for something important to say.

    Read the article

  • Laissez les bon temps rouler! (Microsoft BI Conference 2010)

    - by smisner
    Laissez les bons temps rouler" is a Cajun phrase that I heard frequently when I lived in New Orleans in the mid-1990s. It means "Let the good times roll!" and encapsulates a feeling of happy expectation. As I met with many of my peers and new acquaintances at the Microsoft BI Conference last week, this phrase kept running through my mind as people spoke about their plans in their respective businesses, the benefits and opportunities that the recent releases in the BI stack are providing, and their expectations about the future of the BI stack.Notwithstanding some jabs here and there to point out the platform is neither perfect now nor will be anytime soon (along with admissions that the competitors are also not perfect), and notwithstanding several missteps by the event organizers (which I don't care to enumerate), the overarching mood at the conference was positive. It was a refreshing change from the doom and gloom hovering over several conferences that I attended in 2009. Although many people expect economic hardships to continue over the coming year or so, everyone I know in the BI field is busier than ever and expects to stay busy for quite a while.Self-Service BISelf-service was definitely a theme of the BI conference. In the keynote, Ted Kummert opened with a look back to a fairy tale vision of self-service BI that he told in 2008. At that time, the fairy tale future was a time when "every end user was able to use BI technologies within their job in order to move forward more effectively" and transitioned to the present time in which SQL Server 2008 R2, Office 2010, and SharePoint 2010 are available to deliver managed self-service BI.This set of technologies is presumably poised to address the needs of the 80% of users that Kummert said do not use BI today. He proceeded to outline a series of activities that users ought to be able to do themselves--from simple changes to a report like formatting or an addtional data visualization to integration of an additional data source. The keynote then continued with a series of demonstrations of both current and future technology in support of self-service BI. Some highlights that interested me:PowerPivot, of course, is the flagship product for self-service BI in the Microsoft BI stack. In the TechEd keynote, which was open to the BI conference attendees, Amir Netz (twitter) impressed the audience by demonstrating interactivity with a workbook containing 100 million rows. He upped the ante at the BI keynote with his demonstration of a future-state PowerPivot workbook containing over 2 billion records. It's important to note that this volume of data is being processed by a server engine, and not in the PowerPivot client engine. (Yes, I think it's impressive, but none of my clients are typically wrangling with 2 billion records at a time. Maybe they're thinking too small. This ability to work quickly with large data sets has greater implications for BI solutions than for self-service BI, in my opinion.)Amir also demonstrated KPIs for the future PowerPivot, which appeared to be easier to implement than in any other Microsoft product that supports KPIs, apart from simple KPIs in SharePoint. (My initial reaction is that we have one more place to build KPIs. Great. It's confusing enough. I haven't seen how well those KPIs integrate with other BI tools, which will be important for adoption.)One more PowerPivot feature that Amir showed was a graphical display of the lineage for calculations. (This is hugely practical, especially if you build up calculations incrementally. You can more easily follow the logic from calculation to calculation. Furthermore, if you need to make a change to one calculation, you can assess the impact on other calculations.)Another product demonstration will be available within the next 30 days--Pivot for Reporting Services. If you haven't seen this technology yet, check it out at www.getpivot.com. (It definitely has a wow factor, but I'm skeptical about its practicality. However, I'm looking forward to trying it out with data that I understand.)Michael Tejedor (twitter) demonstrated a feature that I think is really interesting and not emphasized nearly enough--overshadowed by PowerPivot, no doubt. That feature is the Microsoft Business Intelligence Indexing Connector, which enables search of the content of Excel workbooks and Reporting Services reports. (This capability existed in MOSS 2007, but was more cumbersome to implement. The search results in SharePoint 2010 are not only cooler, but more useful by describing whether the content is found in a table or a chart, for example.)This may yet be the dawning of the age of self-service BI - a phrase I've heard repeated from time to time over the last decade - but I think BI professionals are likely to stay busy for a long while, and need not start looking for a new line of work. Kummert repeatedly referenced strategic BI solutions in contrast to self-service BI to emphasize that self-service BI is not a replacement for the services that BI professionals provide. After all, self-service BI does not appear magically on user desktops (or whatever device they want to use). A supporting infrastructure is necessary, and grows in complexity in proportion to the need to simplify BI for users.It's one thing to hear the party line touted by Microsoft employees at the BI keynote, but it's another to hear from the people who are responsible for implementing and supporting it within an organization. Rob Collie (blog | twitter), Kasper de Jonge (blog | twitter), Vidas Matelis (site | twitter), and I were invited to join Andrew Brust (blog | twitter) as he led a Birds of a Feather session at TechEd entitled "PowerPivot: Is It the BI Deal-Changer for Developers and IT Pros?" I would single out the prevailing concern in this session as the issue of control. On one side of this issue were those who were concerned that they would lose control once PowerPivot is implemented. On the other side were those who believed that data should be freely accessible to users in PowerPivot, and even acknowledgment that users would get the data they want even if it meant they would have to manually enter into a workbook to have it ready for analysis. For another viewpoint on how PowerPivot played out at the conference, see Rob Collie's observations.Collaborative BII have been intrigued by the notion of collaborative BI for a very long time. Before I discovered BI, I was a Lotus Notes developer and later a manager of developers, working in a software company that enabled collaboration in the legal industry. Not only did I help create collaborative systems for our clients, I created a complete project management from the ground up to collaboratively manage our custom development work. In that case, collaboration involved my team, my client contacts, and me. I was also able to produce my own BI from that system as well, but didn't know that's what I was doing at the time. Only in recent years has SharePoint begun to catch up with the capabilities that I had with Lotus Notes more than a decade ago. Eventually, I had the opportunity at that job to formally investigate BI as another product offering for our software, and the rest - as they say - is history. I built my first data warehouse with Scott Cameron (who has also ventured into the authoring world by writing Analysis Services 2008 Step by Step and was at the BI Conference last week where I got to reminisce with him for a bit) and that began a career that I never imagined at the time.Fast forward to 2010, and I'm still lauding the virtues of collaborative BI, if only the tools will catch up to my vision! Thus, I was anxious to see what Donald Farmer (blog | twitter) and Rita Sallam of Gartner had to say on the subject in their session "Collaborative Decision Making." As I suspected, the tools aren't quite there yet, but the vendors are moving in the right direction. One thing I liked about this session was a non-Microsoft perspective of the state of the industry with regard to collaborative BI. In addition, this session included a better demonstration of SharePoint collaborative BI capabilities than appeared in the BI keynote. Check out the video in the link to the session to see the demonstration. One of the use cases that was demonstrated was linking from information to a person, because, as Donald put it, "People don't trust data, they trust people."The Microsoft BI Stack in GeneralA question I hear all the time from students when I'm teaching is how to know what tools to use when there is overlap between products in the BI stack. I've never taken the time to codify my thoughts on the subject, but saw that my friend Dan Bulos provided good insight on this topic from a variety of perspectives in his session, "So Many BI Tools, So Little Time." I thought one of his best points was that ideally you should be able to design in your tool of choice, and then deploy to your tool of choice. Unfortunately, the ideal is yet to become real across the platform. The closest we come is with the RDL in Reporting Services which can be produced from two different tools (Report Builder or Business Intelligence Development Studio's Report Designer), manually, or by a third-party or custom application. I have touted the idea for years (and publicly said so about 5 years ago) that eventually more products would be RDL producers or consumers, but we aren't there yet. Maybe in another 5 years.Another interesting session that covered the BI stack against a backdrop of competitive products was delivered by Andrew Brust. Andrew did a marvelous job of consolidating a lot of information in a way that clearly communicated how various vendors' offerings compared to the Microsoft BI stack. He also made a particularly compelling argument about how the existence of an ecosystem around the Microsoft BI stack provided innovation and opportunities lacking for other vendors. Check out his presentation, "How Does the Microsoft BI Stack...Stack Up?"Expo HallI had planned to spend more time in the Expo Hall to see who was doing new things with the BI stack, but didn't manage to get very far. Each time I set out on an exploratory mission, I got caught up in some fascinating conversations with one or more of my peers. I find interacting with people that I meet at conferences just as important as attending sessions to learn something new. There were a couple of items that really caught me eye, however, that I'll share here.Pragmatic Works. Whether you develop SSIS packages, build SSAS cubes, or author SSRS reports (or all of the above), you really must take a look at BI Documenter. Brian Knight (twitter) walked me through the key features, and I must say I was impressed. Once you've seen what this product can do, you won't want to document your BI projects any other way. You can download a free single-user database edition, or choose from more feature-rich standard or professional editions.Microsoft Press ebooks. I also stopped by the O'Reilly Media booth to meet some folks that one of my acquisitions editors at Microsoft Press recommended. In case you haven't heard, Microsoft Press has partnered with O'Reilly Media for distribution and publishing. Apart from my interest in learning more about O'Reilly Media as an author, an advertisement in their booth caught me eye which I think is a really great move. When you buy Microsoft Press ebooks through the O'Reilly web site, you can receive it in any (or all) of the following formats where possible: PDF, epub, .mobi for Kindle and .apk for Android. You also have lifetime DRM-free access to the ebooks. As someone who is an avid collector of books, I fnd myself running out of room for storage. In addition, I travel a lot, and it's hard to lug my reference library with me. Today's e-reader options make the move to digital books a more viable way to grow my library. Having a variety of formats means I am not limited to a single device, and lifetime access means I don't have to worry about keeping track of where I've stored my files. Because the e-books are DRM-free, I can copy and paste when I'm compiling notes, and I can print pages when necessary. That's a winning combination in my mind!Overall, I was pleased with the BI conference. There were many more sessions that I couldn't attend, either because the room was full when I got there or there were multiple sessions running concurrently that I wanted to see. Fortunately, many of the sessions are accessible for viewing online at http://www.msteched.com/2010/NorthAmerica along with the TechEd sessions. You can spot the BI sessions by the yellow skyline on the title slide of the presentation as shown below. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Entity Framework 4.3.1 Code based Migrations and Connector/Net 6.6

    - by GABMARTINEZ
     Code-based migrations is a new feature as part of the Connector/Net support for Entity Framework 4.3.1. In this tutorial we'll see how we can use it so we can keep track of the changes done to our database creating a new application using the code first approach. If you don't have a clear idea about how code first works we highly recommend you to check this subject before going further with this tutorial. Creating our Model and Database with Code First  From VS 2010  1. Create a new console application 2.  Add the latest Entity Framework official package using Package Manager Console (Tools Menu, then Library Package Manager -> Package Manager Console). In the Package Manager Console we have to type  Install-Package EntityFramework This will add the latest version of this library.  We will also need to make some changes to your config file. A <configSections> was added which contains the version you have from EntityFramework.  An <entityFramework> section was also added where you can set up some initialization. This section is optional and by default is generated to use SQL Express. Since we don't need it for now (we'll see more about it below) let's leave this section empty as shown below. 3. Create a new Model with a simple entity. 4. Enable Migrations to generate the our Configuration class. In the Package Manager Console we have to type  Enable-Migrations; This will make some changes in our application. It will create a new folder called Migrations where all the migrations representing the changes we do to our model.  It will also create a Configuration class that we'll be using to initialize our SQL Generator and some other values like if we want to enable Automatic Migrations.  You can see that it already has the name of our DbContext. You can also create you Configuration class manually. 5. Specify our Model Provider. We need to specify in our Class Configuration that we'll be using MySQLClient since this is not part of the generated code. Also please make sure you have added the MySql.Data and the MySql.Data.Entity references to your project. using MySql.Data.Entity;   // Add the MySQL.Data.Entity namespace public Configuration() { this.AutomaticMigrationsEnabled = false; SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator());    // This will add our MySQLClient as SQL Generator } 6. Add our Data Provider and set up our connection string <connectionStrings> <add name="PersonalContext" connectionString="server=localhost;User Id=root;database=Personal;" providerName="MySql.Data.MySqlClient" /> </connectionStrings> <system.data> <DbProviderFactories> <remove invariant="MySql.Data.MySqlClient" /> <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.6.2.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" /> </DbProviderFactories> </system.data> * The version recommended to use of Connector/Net is 6.6.2 or earlier. At this point we can create our database and then start working with Migrations. So let's do some data access so our database get's created. You can run your application and you'll get your database Personal as specified in our config file. Add our first migration Migrations are a great resource as we can have a record for all the changes done and will generate the MySQL statements required to apply these changes to the database. Let's add a new property to our Person class public string Email { get; set; } If you try to run your application it will throw an exception saying  The model backing the 'PersonelContext' context has changed since the database was created. Consider using Code First Migrations to update the database (http://go.microsoft.com/fwlink/?LinkId=238269). So as suggested let's add our first migration for this change. In the Package Manager Console let's type Add-Migration AddEmailColumn Now we have the corresponding class which generate the necessary operations to update our database. namespace MigrationsFromScratch.Migrations { using System.Data.Entity.Migrations; public partial class AddEmailColumn : DbMigration { public override void Up(){ AddColumn("People", "Email", c => c.String(unicode: false)); } public override void Down() { DropColumn("People", "Email"); } } } In the Package Manager Console let's type Update-Database Now you can check your database to see all changes were succesfully applied. Now let's add a second change and generate our second migration public class Person   {       [Key]       public int PersonId { get; set;}       public string Name { get; set; }       public string Address {get; set;}       public string Email { get; set; }       public List<Skill> Skills { get; set; }   }   public class Skill   {     [Key]     public int SkillId { get; set; }     public string Description { get; set; }   }   public class PersonelContext : DbContext   {     public DbSet<Person> Persons { get; set; }     public DbSet<Skill> Skills { get; set; }   } If you would like to customize any part of this code you can do that at this step. You can see there is the up method which can update your database and the down that can revert the changes done. If you customize any code you should make sure to customize in both methods. Now let's apply this change. Update-database -verbose I added the verbose flag so you can see all the SQL generated statements to be run. Downgrading changes So far we have always upgraded to the latest migration, but there may be times when you want downgrade to a specific migration. Let's say we want to return to the status we have before our last migration. We can use the -TargetMigration option to specify the migration we'd like to return. Also you can use the -verbose flag. If you like to go  back to the Initial state you can do: Update-Database -TargetMigration:$InitialDatabase  or equivalent: Update-Database -TargetMigration:0  Migrations doesn't allow by default a migration that would ocurr in a data loss. One case when you can got this message is for example in a DropColumn operation. You can override this configuration by setting AutomaticMigrationDataLossAllowed to true in the configuration class. Also you can set your Database Initializer in case you want that these Migrations can be applied automatically and you don't have to go all the way through creating a migration and updating later the changes. Let's see how. Database Initialization by Code We can specify an initialization strategy by using Database.SetInitializer (http://msdn.microsoft.com/en-us/library/gg679461(v=vs.103)). One of the strategies that I found very useful when you are at a development stage (I mean not for production) is the MigrateDatabaseToLatestVersion. This strategy will make all the necessary migrations each time there is a change in our model that needs a database replication, this also implies that we have to enable AutomaticMigrationsEnabled flag in our Configuration class. public Configuration()         {             AutomaticMigrationsEnabled = true;             AutomaticMigrationDataLossAllowed = true;             SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator());    // This will add our MySQLClient as SQL Generator          } In the new EntityFramework section of your Config file we can set this at a context level basis.  The syntax is as follows: <contexts> <context type="Custom DbContext name, Assembly name"> <databaseInitializer type="System.Data.Entity.MigrateDatabaseToLatestVersion`2[[ Custom DbContext name, Assembly name],  [Configuration class name, Assembly name]],  EntityFramework" /> </context> </contexts> In our example this would be: The syntax is kind of odd but very convenient. This way all changes will always be applied when we do any data access in our application. There are a lot of new things to explore in EF 4.3.1 and Migrations so we'll continue writing some more posts about it. Please let us know if you have any questions or comments, also please check our forums here where we keep answering questions in general for the community.  Hope you found this information useful. Happy MySQL/.Net Coding! 

    Read the article

  • Office 2010: It&rsquo;s not just DOC(X) and XLS(X)

    - by andrewbrust
    Office 2010 has released to manufacturing.  The bits have left the (product team’s) building.  Will you upgrade? This version of Office is officially numbered 14, a designation that correlates with the various releases, through the years, of Microsoft Word.  There were six major versions of Word for DOS, during whose release cycles came three 16-bit Windows versions.  Then, starting with Word 95 and counting through Word 2007, there have been six more versions – all for the 32-bit Windows platform.  Skip version 13 to ward off folksy bad luck (and, perhaps, the bugs that could come with it) and that brings us to version 14, which includes implementations for both 32- and 64-bit Windows platforms.  We’ve come a long way baby.  Or have we? As it does every three years or so, debate will now start to rage on over whether we need a “14th” version the PC platform’s standard word processor, or a “13th” version of the spreadsheet.  If you accept the premise of that question, then you may be on a slippery slope toward answering it in the negative.  Thing is, that premise is valid for certain customers and not others. The Microsoft Office product has morphed from one that offered core word processing, spreadsheet, presentation and email functionality to a suite of applications that provides unique, new value-added features, and even whole applications, in the context of those core services.  The core apps thus grow in mission: Excel is a BI tool.  Word is a collaborative editorial system for the production of publications.  PowerPoint is a media production platform for for live presentations and, increasingly, for delivering more effective presentations online.  Outlook is a time and task management system.  Access is a rich client front-end for data-driven self-service SharePoint applications.  OneNote helps you capture ideas, corral random thoughts in a semi-structured way, and then tie them back to other, more rigidly structured, Office documents. Google Docs and other cloud productivity platforms like Zoho don’t really do these things.  And there is a growing chorus of voices who say that they shouldn’t, because those ancillary capabilities are over-engineered, over-produced and “under-necessary.”  They might say Microsoft is layering on superfluous capabilities to avoid admitting that Office’s core capabilities, the ones people really need, have become commoditized. It’s hard to take sides in that argument, because different people, and the different companies that employ them, have different needs.  For my own needs, it all comes down to three basic questions: will the new version of Office save me time, will it make the mundane parts of my job easier, and will it augment my services to customers?  I need my time back.  I need to spend more of it with my family, and more of it focusing on my own core capabilities rather than the administrative tasks around them.  And I also need my customers to be able to get more value out of the services I provide. Help me triage my inbox, help me get proposals done more quickly and make them easier to read.  Let me get my presentations done faster, make them more effective and make it easier for me to reuse materials from other presentations.  And, since I’m in the BI and data business, help me and my customers manage data and analytics more easily, both on the desktop and online. Those are my criteria.  And, with those in mind, Office 2010 is looking like a worthwhile upgrade.  Perhaps it’s not earth-shattering, but it offers a combination of incremental improvements and a few new major capabilities that I think are quite compelling.  I provide a brief roundup of them here.  It’s admittedly arbitrary and not comprehensive, but I think it tells the Office 2010 story effectively. Across the Suite More than any other, this release of Office aims to give collaboration a real workout.  In certain apps, for the first time, documents can be opened simultaneously by multiple users, with colleagues’ changes appearing in near real-time.  Web-browser-based versions of Word, Excel, PowerPoint and OneNote will be available to extend collaboration to contributors who are off the corporate network. The ribbon user interface is now more pervasive (for example, it appears in OneNote and in Outlook’s main window).  It’s also customizable, allowing users to add, easily, buttons and options of their choosing, into new tabs, or into new groups within existing tabs. Microsoft has also taken the File menu (which was the “Office Button” menu in the 2007 release) and made it into a full-screen “Backstage” view where document-wide operations, like saving, printing and online publishing are performed. And because, more and more, heavily formatted content is cut and pasted between documents and applications, Office 2010 makes it easier to manage the retention or jettisoning of that formatting right as the paste operation is performed.  That’s much nicer than stripping it off, or adding it back, afterwards. And, speaking of pasting, a number of Office apps now make it especially easy to insert screenshots within their documents.  I know that’s useful to me, because I often document or critique applications and need to show them in action.  For the vast majority of users, I expect that this feature will be more useful for capturing snapshots of Web pages, but we’ll have to see whether this feature becomes popular.   Excel At first glance, Excel 2010 looks and acts nearly identically to the 2007 version.  But additional glances are necessary.  It’s important to understand that lots of people in the working world use Excel as more of a database, analytics and mathematical modeling tool than merely as a spreadsheet.  And it’s also important to understand that Excel wasn’t designed to handle such workloads past a certain scale.  That all changes with this release. The first reason things change is that Excel has been tuned for performance.  It’s been optimized for multi-threaded operation; previously lengthy processes have been shortened, especially for large data sets; more rows and columns are allowed and, for the first time, Excel (and the rest of Office) is available in a 64-bit version.  For Excel, this means users can take advantage of more than the 2GB of memory that the 32-bit version is limited to. On the analysis side, Excel 2010 adds Sparklines (tiny charts that fit into a single cell and can therefore be presented down an entire column or across a row) and Slicers (a more user-friendly filter mechanism for PivotTables and charts, which visually indicates what the filtered state of a given data member is).  But most important, Excel 2010 supports the new PowerPIvot add-in which brings true self-service BI to Office.  PowerPivot allows users to import data from almost anywhere, model it, and then analyze it.  Rather than forcing users to build “spreadmarts” or use corporate-built data warehouses, PowerPivot models function as true columnar, in-memory OLAP cubes that can accommodate millions of rows of data and deliver fast drill-down performance. And speaking of OLAP, Excel 2010 now supports an important Analysis Services OLAP feature called write-back.  Write-back is especially useful in financial forecasting scenarios for which Excel is the natural home.  Support for write-back is long overdue, but I’m still glad it’s there, because I had almost given up on it.   PowerPoint This version of PowerPoint marks its progression from a presentation tool to a video and photo editing and production tool.  Whether or not it’s successful in this pursuit, and if offering this is even a sensible goal, is another question. Regardless, the new capabilities are kind of interesting.  A greatly enhanced set of slide transitions with 3D effects; in-product photo and video editing; accommodation of embedded videos from services such as YouTube; and the ability to save a presentation as a video each lay testimony to PowerPoint’s transformation into a media tool and away from a pure presentation tool. These capabilities also recognize the importance of the Web as both a source for materials and a channel for disseminating PowerPoint output. Congruent with that is PowerPoint’s new ability to broadcast a slide presentation, using a quickly-generated public URL, without involving the hassle or expense of a Web meeting service like GoToMeeting or Microsoft’s own LiveMeeting.  Slides presented through this broadcast feature retain full color fidelity and transitions and animations are preserved as well.   Outlook Microsoft’s ubiquitous email/calendar/contact/task management tool gains long overdue speed improvements, especially against POP3 email accounts.  Outlook 2010 also supports multiple Exchange accounts, rather than just one; tighter integration with OneNote; and a new Social Connector providing integration with, and presence information from, online social network services like LinkedIn and Facebook (not to mention Windows Live).  A revamped conversation view now includes messages that are part of a given thread regardless of which folder they may be stored in. I don’t know yet how well the Social Connector will work or whether it will keep Outlook relevant to those who live on Facebook and LinkedIn.  But among the other features, there’s very little not to like.   OneNote To me, OneNote is the part of Office that just keeps getting better.  There is one major caveat to this, which I’ll cover in a moment, but let’s first catalog what new stuff OneNote 2010 brings.  The best part of OneNote, is the way each of its versions have managed hierarchy: Notebooks have sections, sections have pages, pages have sub pages, multiple notes can be contained in either, and each note supports infinite levels of indentation.  None of that is new to 2010, but the new version does make creation of pages and subpages easier and also makes simple work out of promoting and demoting pages from sub page to full page status.  And relationships between pages are quite easy to create now: much like a Wiki, simply typing a page’s name in double-square-brackets (“[[…]]”) creates a link to it. OneNote is also great at integrating content outside of its notebooks.  With a new Dock to Desktop feature, OneNote becomes aware of what window is displayed in the rest of the screen and, if it’s an Office document or a Web page, links the notes you’re typing, at the time, to it.  A single click from your notes later on will bring that same document or Web page back on-screen.  Embedding content from Web pages and elsewhere is also easier.  Using OneNote’s Windows Key+S combination to grab part of the screen now allows you to specify the destination of that bitmap instead of automatically creating a new note in the Unfiled Notes area.  Using the Send to OneNote buttons in Internet Explorer and Outlook result in the same choice. Collaboration gets better too.  Real-time multi-author editing is better accommodated and determining author lineage of particular changes is easily carried out. My one pet peeve with OneNote is the difficulty using it when I’m not one a Windows PC.  OneNote’s main competitor, Evernote, while I believe inferior in terms of features, has client versions for PC, Mac, Windows Mobile, Android, iPhone, iPad and Web browsers.  Since I have an Android phone and an iPad, I am practically forced to use it.  However, the OneNote Web app should help here, as should a forthcoming version of OneNote for Windows Phone 7.  In the mean time, it turns out that using OneNote’s Email Page ribbon button lets you move a OneNote page easily into EverNote (since every EverNote account gets a unique email address for adding notes) and that Evernote’s Email function combined with Outlook’s Send to OneNote button (in the Move group of the ribbon’s Home tab) can achieve the reverse.   Access To me, the big change in Access 2007 was its tight integration with SharePoint lists.  Access 2010 and SharePoint 2010 continue this integration with the introduction of SharePoint’s Access Services.  Much as Excel Services provides a SharePoint-hosted experience for viewing (and now editing) Excel spreadsheet, PivotTable and chart content, Access Services allows for SharePoint browser-hosted editing of Access data within the forms that are built in the Access client itself. To me this makes all kinds of sense.  Although it does beg the question of where to draw the line between Access, InfoPath, SharePoint list maintenance and SharePoint 2010’s new Business Connectivity Services.  Each of these tools provide overlapping data entry and data maintenance functionality. But if you do prefer Access, then you’ll like  things like templates and application parts that make it easier to get off the blank page.  These features help you quickly get tables, forms and reports built out.  To make things look nice, Access even gets its own version of Excel’s Conditional Formatting feature, letting you add data bars and data-driven text formatting.   Word As I said at the beginning of this post, upgrades to Office are about much more than enhancing the suite’s flagship word processing application. So are there any enhancements in Word worth mentioning?  I think so.  The most important one has to be the collaboration features.  Essentially, when a user opens a Word document that is in a SharePoint document library (or Windows Live SkyDrive folder), rather than the whole document being locked, Word has the ability to observe more granular locks on the individual paragraphs being edited.  Word also shows you who’s editing what and its Save function morphs into a sync feature that both saves your changes and loads those made by anyone editing the document concurrently. There’s also a new navigation pane that lets you manage sections in your document in much the same way as you manage slides in a PowerPoint deck.  Using the navigation pane, you can reorder sections, insert new ones, or promote and demote sections in the outline hierarchy.  Not earth shattering, but nice.   Other Apps and Summarized Findings What about InfoPath, Publisher, Visio and Project?  I haven’t looked at them yet.  And for this post, I think that’s fine.  While those apps (and, arguably, Access) cater to specific tasks, I think the apps we’ve looked at in this post service the general purpose needs of most users.  And the theme in those 2010 apps is clear: collaboration is key, the Web and productivity are indivisible, and making data and analytics into a self-service amenity is the way to go.  But perhaps most of all, features are still important, as long as they get you through your day faster, rather than adding complexity for its own sake.  I would argue that this is true for just about every product Microsoft makes: users want utility, not complexity.

    Read the article

  • How to upgrade your Solaris 11 with the latest available SRUs ?

    - by jim
    1 ) Follow the instructions (*) in the document "Updating the Software on Your Oracle Solaris 11 System" * see and apply "How to Configure the Oracle Solaris support Repository" then run: # pkg update --accept Reboot if necessary (see "why" in STEP 3) Note: it is possible that your "pkg" package is not up to date # pkg update WARNING: pkg(5) appears to be out of date, and should be updated before running update.  Please update pkg(5) using 'pfexec pkg install pkg:/package/pkg' and then retry the update. -> So just upgrade it: # pkg install pkg:/package/pkg Reboot if necessary (see "why" in STEP 3) By the way, note that I am using the DEV tree: # pkg publisher -PPUBLISHER                             TYPE     STATUS   URIsolaris                               origin   online   https://pkg.oracle.com/solaris/dev/ 2 ) Now our system is ready to jump to the latest SRUs so check what is available: # pkg list -af entire NAME (PUBLISHER)                     VERSION                    IFO entire                                            0.5-DOT-11-0.175.1.0.0.24-DOT-2    ---   --> Latest version available in the repository ! entire                                            0.5.11-0.175.1.0.0.24.0    --- entire                                            0.5.11-0.175.1.0.0.23.0    --- entire                                            0.5.11-0.175.1.0.0.22.1    --- entire                                            0.5.11-0.175.1.0.0.21.0    --- entire                                            0.5.11-0.175.1.0.0.20.0    --- entire                                            0.5.11-0.175.1.0.0.19.0    --- entire                                            0.5.11-0.175.1.0.0.18.0    --- entire                                            0.5.11-0.175.1.0.0.17.0    --- entire                                            0.5.11-0.175.1.0.0.16.0    --- entire                                            0.5.11-0.175.1.0.0.15.1    --- entire                                            0.5.11-0.175.1.0.0.14.0    --- entire                                            0.5.11-0.175.1.0.0.13.0    --- entire                                            0.5.11-0.175.1.0.0.12.0    --- entire                                            0.5.11-0.175.1.0.0.11.0    --- entire                                            0.5.11-0.175.1.0.0.10.0    --- entire                                            0.5.11-0.175.0.11.0.4.1    i--   --> this is at what level your OS is ! 3 ) Apply the latest SRU: (don´t forget the --accept parameter) # pkg update --accept entire-AT-0.5.11-0.175.1.0.0.24.2------------------------------------------------------------Package: pkg://solaris/consolidation/osnet/osnet-incorporation-AT-0.5.11,5.11-0.175.1.0.0.24.2:20120919T184141ZLicense: usr/src/pkg/license_files/lic_OTNOracle Technology Network Developer License AgreementOracle Solaris, Oracle Solaris Cluster and Oracle Solaris ExpressEXPORT CONTROLSSelecting the "Accept License Agreement" button is a confirmationof your agreement that you comply, now and during the trial term(if applicable), with each of the following statements:-You are not a citizen, national, or resident of, and are not undercontrol of, the government of Cuba, Iran, Sudan, North Korea, Syria,or any country to which the United States has prohibited export. <....> Packages to remove:  10 Packages to install:  38 Packages to update: 443 Mediators to change:   2 Create boot environment: Yes   --> a reboot is required and a new BE will be created for you !! Create backup boot environment:  No DOWNLOAD                               PKGS       FILES    XFER (MB)Completed                                491/491 23113/23113  504.2/504.2PHASE                                        ACTIONSRemoval Phase                           10359/10359 Install Phase                               15530/15530 Update Phase                              15543/15543 PHASE                                          ITEMSPackage State Update Phase         932/932 Package Cache Update Phase       452/452 Image State Update Phase                    2/2 A clone of solaris-1 exists and has been updated and activated.On the next boot the Boot Environment solaris-2 will bemounted on '/'.  Reboot when ready to switch to this updated BE. 4 ) Reboot your system # reboot  5 ) Resources Solaris 11 Express and Solaris 11 Support Repositories Explained [ID 1021281.1] Oracle Solaris 11 Release Notes Updating the Software on Your Oracle Solaris 11 System

    Read the article

  • java inheritance keyword super()

    - by gucciv12
    requirement: Given the class 'ReadOnly' with the following behavior: A (protected) integer instance variable named 'val'. A constructor that accepts an integer and assigns the value of the parameter to the instance variable 'val'. A method name 'getVal' that returns the value of 'val'. Write a subclass named 'ReadWrite' with the following additional behavior: Any necessary constructors. a method named 'setVal' that accepts an integer parameter and assigns it the the 'val' instance variable. a method 'isDirty' that returns true if the setVal method was used to override the value of the 'val' variable. Code class ReadWrite extends ReadOnly { super(int val); void setVal(int val){this.val = val;} boolean isDirty() {if (setVal()(return true)) else return false;}} More Hints: ?     You should be using: modified ?     You should be using: private ?     You should be using: public

    Read the article

  • How to do a JavaScript HTML 5 Canvas image "page flip" like you commonly see in Flash?

    - by Dr. Zim
    Has anyone tried recreating the page flip effect with images like you commonly see in Adobe Flash with JavaScript and HTML 5's canvas tag? Are there any frameworks or JQuery plug-ins that do this type of effect? The page flip in Flash allows you to grab a corner of the simulated book page and flip the page like you would flip a real book's page. I really want to learn how to do this with JavaScript and HTML 5's canvas tag, but not sure where to start nor what formulas would be necessary. Example page flip in flash

    Read the article

  • Windows 7 64 / Visual Studio 2008 / OpenCV2.1 error: "The application was unable to start correctly

    - by James
    Hey all, I'm building OpenCV2.1 from top of branch in 64 bit mode, when I link the libraries against my code (that works in 32 bit mode on XP), I get the dialog: "The application was unable to start correctly (0xc0150002) Click OK to close the application" When I start the application. The event viewer is pointing at one of the OpenCV dll's & says it's a Side-by-Side error, but I'm definitely building OpenCV & my code as a 64 bit compile, and there are no errors during that process. I've tried fiddling with the /MTd options & it doesn't help. Some (almost) related questions have suggested installing the VS2008 redistributable package, but I'm building using vs2008 pro, that seems like madness? Is it still necessary to install the package in my case? Any help, including the cause of these side-by-side errors, would be appreciated. James

    Read the article

  • Defining multiple values in DefineConstants in MsBuild element?

    - by Sardaukar
    I'm currently integrating my Wix projects in MSBuild. It is necessary for me to pass multiple values to the Wix project. One value will work (ProductVersion in the sample below). <Target Name="BuildWixSetups"> <MSBuild Condition="'%(WixSetups.Identity)'!=''" Projects="%(WixSetups.Identity)" Targets="Rebuild" Properties="Configuration=Release;OutputPath=$(OutDir);DefineConstants=ProductVersion=%(WixSetups.ISVersion)" ContinueOnError="true"/> </Target> However, how do I pass multiple values to the DefineConstants key? I've tried all the 'logical' separators (space, comma, semi-colon, pipe-symbol), but this doesn't work. Has someone else come across this problem? Solutions that don't work: Trying to add a DefineConstants element does not work because DefineConstants needs to be expressed within the Properties attribute.

    Read the article

  • logback with EJB3.1

    - by kgrad
    I am using logback/slf4j to handle logging in my application. Everything was working perfectly until I started using EJBs. Once I added a stateless EJB to my app, the logger started ignoring my logback.xml and stopped using my appenders. I switched to a programmatic logger configuration to see what was wrong and now I am getting the following error when I try to use my logger within the EJB: org.slf4j.impl.JDK14LoggerFactory cannot be cast to ch.qos.logback.classic.LoggerContext stemming from the line: LoggerContext lc = (LoggerContext) LoggerFactory.getILoggerFactory(); Is there any special configuration necessary to get logback to work with EJBs? If it matters I am deploying on glassfish v3.

    Read the article

  • Shell extension installation not recognized by Windows 7 64-bit shell

    - by Avalanchis
    I have a Copy Hook Handler shell extension that I'm trying to install on Windows 7 64-bit. The shell extension DLL is compiled in two separate versions for 32-bit and 64-bit Windows. The DLL implements DLLRegisterServer which adds the necessary registry entries. After adding the registry entries, it calls the following line of code to nofity the Windows shell: SHChangeNotify(SHCNE_ASSOCCHANGED, SHCNF_IDLIST, NULL, NULL); Everything works great on Windows7 32-bit. The shell recognizes the extension immediately. On 64-bit, the shell extension is only recognized after the shell is restarted. Is there anything I can do to cause the extension to be recognized without restarting the 64-bit shell?

    Read the article

  • Fluent NHibernate Automapping with RIA services

    - by VexXtreme
    Hi guys I've encountered a slight problem recently, or rather a lack of understanding of how NHibernate automapping works with RIA data services. Namely, I don't understand how to use Association and Include attributes. For instance, I've created two tables in my database and corresponding classes (that NHibernate correctly fills). The problem is, RIA doesn't generate properties (collections) bound by foreign key to other tables, on the client side, although I've defined them in my classes in my domain model... it generates just properties that belong to their own class, on the client side. I assume that these attributes aren't necessary since NHibernate automapper is supposed to fill those collections on it's own... I'm quite confused as to how this works. And I don't understand why RIA simply skips properties such as public virtual IList<Medication> Medications{ get; set; } during autogeneration. Any input is appreciated Thanks

    Read the article

  • Is there a way to avoid putting the Perl version number into the "use lib" line for Perl modules in

    - by Kinopiko
    I am trying to install some Perl modules into a non-standard location, let's call it /non/standard/location. In the script which uses the module, it seems to be necessary to specify a long directory path including the version of Perl, like so: #!/usr/local/bin/perl use lib '/non/standard/location/lib/perl5/site_perl/5.8.9/'; use A::B; Is there any use lib or other statement which I can use which is not so long and verbose, and which does not include the actual version of Perl, in order that I don't have to go back and edit this out of the program if the version of Perl is upgraded?

    Read the article

  • [C++] Write connected components of a graph using Boost Graph

    - by conradlee
    I have an file that is a long list of weighted edges, in the following form node1_id node2_id weight node1_id node3_id weight and so on. So one weighted edge per line. I want to load this file into boost graph and find the connected components in the graph. Each of these connected components is a subgraph. For each of these component subgraphs, I want to write the edges in the above-described format. I want to do all this using boost graph. This problem is in principle simple, it's just I'm not sure how to implement it neatly because I don't know my way around Boost Graph. I have already spent some hours and have code that will find the connected components, but my version is surely much longer and more complicated that necessary---I'm hoping there's a boost-graph ninja out there that can show me the right, easy way.

    Read the article

  • Push notifications....Feedback problem, when using apns-sharp C# library

    - by Artur
    Hello everybody. I've installed on my iPhone ad-hoc version, so it means distribution one. I've downloaded apns-shart library and tried to test push notifications on that. I have all necessary certificates. I've succeeded to push notifications using test notification project and with this everything is fine. My problem is: when I've tried to use test feedback project it fetched needed device tokens, but when I've tried to launch it second time, it return 0 bytes. What ca I do to fix the problem.

    Read the article

  • WPF: OnRender and Hit Testing

    - by stefan.at.wpf
    Hello, when using OnRender to draw something on the screen, is there any way to perform Hit Testing on the drawn graphics? Sample Code protected override void OnRender(System.Windows.Media.DrawingContext drawingContext) { base.OnRender(drawingContext); drawingContext.DrawRectangle(Brushes.Black, null, new Rect(50, 50, 100, 100)); } Obviously one has no reference to the drawn Rectangle which would be necessary to perform hit testing or am I wrong about this? I know I can use DrawingVisual, I'm just curious if my understanding is correct, that using OnRender to draw something you can't perform any hit testing on the drawn things?

    Read the article

  • Reading EventLog C# Errors

    - by Robert
    I have this code in my ASP.NET application written in C# that is trying to read the eventlog, but it returns an error. EventLog aLog = new EventLog(); aLog.Log = "Application"; aLog.MachineName = "."; // Local machine foreach (EventLogEntry entry in aLog.Entries) { if (entry.Source.Equals("tvNZB")) Label_log.Text += "<p>" + entry.Message; } One of the entries it returns is "The description for Event ID '0' in Source 'tvNZB' cannot be found. The local computer may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'Service started successfully.'" I only want the 'Service started successfully'. Any ideas?

    Read the article

  • Convert IP address string to binary in Python

    - by pizzim13
    As part of a larger application, I am trying to convert an IP address to binary. Purpose being to later calculate the broadcast address for Wake on LAN traffic. I am assuming that there is a much more efficient way to do this then the way I am thinking. Which is breaking up the IP address by octet, adding 0's to the beginning of each octet where necessary, converting each octet to binary, then combining the results. Should I be looking at netaddr, sockets, or something completely different? Example: From 192.168.1.1 to 11000000.10101000.00000001.00000001

    Read the article

  • Making an element unselectable using jQuery

    - by Acorn
    What's the best way to make an element unselectable using jQuery? I know you can use onselectstart="return false;" ondragstart="return false;" in the HTML, but I'm not sure how cross browser compatible that is. I also see someone's made a jQuery plugin: http://plugins.jquery.com/project/Unselectable .. would a plugin like that be necessary? Is there a simple, compatible way to make an element unselectable? The reason for wanting to do this is purely aesthetic. With webpages that have dragging or click events, it's not very nice when things get selected.

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >