Search Results

Search found 18913 results on 757 pages for 'ideas'.

Page 96/757 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• Who was your mentor? Where can I find mine?

  - by aredkid

  In many of articles I've read, finding a mentor is often suggested. One to who would guide, teach and more. (I wouldn't know the details, I don't have one, yet.) So, who was your mentor, if any? I have only had indirect mentors: professor at university, manager at work whom I've watched and learnt from the most. And otherwise, Twitter has been a great place to follow the professionals and discover more about the technologies that interest me. But I still wonder how I could find one because I can sense that I might be lacking in my experience. Ideas?

  Read the article

• mount old ATA disk to USB adapter

  - by 213441265152351

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic USB-IDE, an ATA adapter to USB 1.0 similar to the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. Any ideas?

  Read the article

• USB Mouse sleeping after 5 seconds when on battery

  - by yurividal

  My usb mouse sleeps after 5 seconds of inactivity when running on battery power. It wakes uo again when i press any button on the mouse. This is really annoying. I have made lsusb, and I noticed my mouse is Bus 001 Device 012: ID 04d9:2083 Holtek Semiconductor, Inc. I have checked my /sys/bus/usb/devices/usb1/power/autosuspend but it is already set to 0, and the directory usb1 has many subdirectories which also have autosuspend files, and i dont know how to edit them. Also, I would like a permanent solution, which would work for any mouse, on any of my 3 usb ports. Any ideas? Using: Ubuntu 12.04 64bit

  Read the article

• sprite animation system height recalculating has some issues

  - by Nicolas Martel

  Basically, the way it works is that it update the frame to show every let's say 24 ticks and every time the frame update, it recalculates the height and width of the new sprite to render so that my gravity logics and stuff works well. But the problem i am having now is a bit hard to explain in words only, therefore i will use this picture to assist me The picture So what i need basically is that if let's say i froze the sprite at the first frame, then unfreeze it and freeze it at the second frame, have the second frame's sprite (let's say it's a prone move) simply stand on the foothold without starting the gravity and when switching back, have the first sprite go back on the foothold like normal without being under the foothold. I had 2 ideas on doing this but I'm not sure it's the most efficient ways to do it so i wanna hear your inputs.

  Read the article

• How to change keyboard layout?

  - by swedishhh

  I'm on ubuntu 12.04. Recently I bought a cheap apple style bluetooth keyboard. It pairs OK. I paired it with the current 102 key still attached. Anyway I noticed that the character mapping is incorrect. Most keys do not type anything - some keys on the right (k, l, ;') etc give numbers, but that's about it. So I rebooted, with 102 kbd unattached, and the bluetooth keyboard on, ready to connect. After boot at the login screen, the bluetooth keyboard had paired. I typed my password, and it logged in fine!! However after the user login was complete it reverted to the broken behaviour. A glance at the layout chart shows ubuntu thinks I still have the 102 layout, even though it remained disconnected. Any ideas? Thanks, Dave

  Read the article

• The Coming Storm of Blog Entries

  - by StuartBrierley

  Well, maybe. I have realised that I have many many ideas and notes for blogs entries dotted around my desk, along with a number of half completed entries that I have been meaning to get sorted and finished and posted. I am hoping that over the next couple of weeks I will be able to get some of these online, including my experineces installing BizTalk 2009 on two different types of environment, some useful utilities I have used and also some notes on issues that I have encountered recently and not so recently when developing BizTalk solutions. If not a storm it may at least drizzle.

  Read the article

• Is there a good example of the difference between practice and theory?

  - by a_person

  There has been a lot of posters advising that the best way to retain knowledge is to apply it practically. After ignoring said advice for several years in a futile attempt to accumulate enough theoretical knowledge to be prepared for every possible case scenario, the process which lead me to assembling a library that's easily worth ~6K, I finally get it. I would like to share my story in the hopes that others will avoid taking the same route that was taken by me. I've selected graphical format (photos with caption to be exact) as my media. Help me with your ideas, maybe a fragment of code, or other imagery that would convey a message of the inherent difference between practice and theory.

  Read the article

• TSQL Tuesday #15 – Maintaining Your Sanity While Managing Large Environments

  - by Jonathan Kehayias

  This month’s TSQL Tuesday event is being hosted by Pat Wright (Blog | Twitter) and the topic this month is Automation! “ I figured that since many of you out there set a goal this year to blog more and to learn Powershell then this Topic should help in both of those goals. So the topic I have chosen for this month is Automation! It can be Automation with T-SQL or with Powershell or a mix of both. Give us your best tips/tricks and ideas for making our lives easier through Automation.” Automation is...(read more)

  Read the article

• What sort of leaderboard for my game?

  - by Martin

  I recently published a word game for Windows Phone and I am really happy to have some players. The game is entirely offline and at the end of a game, the player's score is published to a server. I'm collecting the scores to build a leaderboard. Right now, I don't believe that the leaderboard I offer to my users is appropriate. I essentially accumulate the score of all the games of a user for a given day and that becomes their score. So if Player 1 plays 3 games and gets 100, 150 and 200 points, its score for the day is 450 points. I would like to get your ideas and opinion. How do I keep my game challenging and engaging with a good leaderboard? Should I continue accumulating the score for a day? Should I just keep the best score? Thanks!

  Read the article

• OUYA and Unity set up problems

  - by Atkobeau

  I'm having trouble with the Unity / OUYA plugin. I'm using Unity 4 with the latest update on a Windows 7 machine. When I open the starter kit and try to compile the plugin I get the following error: Picked up _JAVA_OPTIONS: -Xmx512M And if I try to Build and Run I get this error: Error building Player: ArgumentException: Illegal characters in path. I'm stumped, I've gone through lots of forum posts here and on stackoverflow and I can't seem to resolve it. My environment variables look like this: PATH - C:\Users\dave\Documents\adt-bundle-windows-x86_64-20130219\sdk\tools; C:\Users\dave\Documents\adt-bundle-windows-x86_64-20130219\sdk\platform-tools\ JAVA_HOME - C:\Program Files (x86)\Java\jdk1.6.0_45\ Everything in the OUYA Panel is white Any ideas?

  Read the article

• Ubuntu 13.04 on Lenovo G580 > built-in (web)cam not recognized

  - by user159295

  I've installed Ubuntu 13.04 on a Lenovo G580. Now I noticed that the built-in (web)cam is not being recognized. Does anybody know how to fix this and get the webcam running? Any help is appreciated! Thanks I've downloaded/installed the suggested program and the webcam is working within that program. However, when running Camera Test from the System Testing here's what happens: when clicking on "Test", there's NO image showing up a few seconds after clicking on "Test", an error message is popping up saying "Sorry, Ubuntu 13.04 has experienced an internal error" When going to Skype, video is enable and under "select webcam" there's "Lenovo EasyCamera (/dev/video0) as only option selected. But, Skype doesn't recognize the camera as there's no pictures. Any ideas on how to get this straightened out?

  Read the article

• What if you don't have code samples to give a prospective employer?

  - by lucks

  What do you do when you don't have any good code samples available when asked by a prospective employer? I like to consider myself a fairly capable developer but I can't share any of the software I've been writing for my company the last few years. Unfortunately, I haven't been able to find the time to put much work in my personal projects either. Basically, I don't think I can find any code samples that are a good representative of my skills that I can share. Any ideas? Thanks in advance.

  Read the article

• Blogger Dynamic template sometimes broken

  - by ber4444

  In all browsers (IE, Chrome, etc.) in my office and in all Blogger blogs using the dynamic template, I'm having this strange problem: No menu on the right side (except for the Subscribe button - other buttons are missing) plus no layout selection bar (top row). This problem is occasional, not happening reliably; any ideas? Update: whenever I get the menu problem with dynamic templates, I also seem to get a broken page (in Chrome, IE, etc) with simple templates - see second screenshot. Does anyone having this issue?

  Read the article

• Low complexity shader to indicate the sides of a polyline

  - by Pris

  I have a bunch of polylines that I draw using GL_LINES. They can have thousands of points. They actually represent the separation of land and water on a map. I don't have complete polygons, just the ordered set of points. I'm looking for a neat but efficient way to visually convey Side A and Side B as being different. For example I could offset the polyline in one direction a few times and fade it out (but every offset is doubling the number of points), or offset it once to make a "ribbon" and give one side a 'glow' like effect to mimic the outer glow or shadow of a polygon). This is for a mobile application and I'm using OpenGL ES 2. I'd like to keep the effect as simple as possible from a complexity stand point. I'm looking for some additional ideas; maybe there's a clever shader technique out there or a visual effect I haven't considered.

  Read the article

• Why is the Touchpad tab missing?

  - by U47

  So my Dell Vostro 3360 came out of the box with an Alps touchpad which was detected as PS/2. Through these steps, I was able to get as far as it appearing to be recognized as a touchpad. Howevver, I do not get the Touchpad tab in the Mouse/Touchpad settings. Two-finger scrolling appears to work, and the Fn-F3 does disable the touchpad, but the settings are so brutal that it is almost impossible to work with. Very difficult to scroll at all accurately. I'm hoping there's some settings which can be tweaked which will help with this. Any ideas? My xinput listing is as follows: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? GlidePoint Virtual Touchpad id=12 [slave pointer (2)] Thanks,

  Read the article

• I want to host clients' websites, but not their email. What's the easiest way to handle this?

  - by Phil

  My company lets non-technical users build their own niche industry websites on our server, which we host. they can currently point their nameservers at their registrar to us, which ends up with them no longer having access to their email if they've already set it up through said registrar. We don't want to interfere with their existing email, nor do we want to get into the business of setting up email for them through our service. Thus, having them point A records/cname to us would work, but is this too complex for a non-technie user? We thought of having them point nameservers to us but pointing the MX records back to them, but this is also beyond their scope. Is there an easy way to 'point records' at their initial state? Any other ideas/feedback?

  Read the article

• How to set up bridged networking in Xen?

  - by Joe Carr

  I have 2 domU virtual machines installed on a 11.10 Oneiric Dom0. My internal network is on the 192.168.1 subnet, and when the domU's start, they get ips on the 192.168.122 subnet. I have attempted to follow the instructions here : http://wiki.kartbuilding.net/index.php/Xen_Networking xend-config.sxp is configured correctly, but neither of my domU's have a config file in /etc/xen to modify. ifconfig reports that I have the following devices : eth0, lo, tap3.0, vif3.0, vif4.0, virbr0 bridge-utils is installed. I also just attempted to follow these steps : http://serverfault.com/questions/233201/bringing-the-xenbr0-interface-up-on-xen-under-ubuntu-8-04 sudo brctl addbr xenbr0 sudo brctl addif xenbr0 vif3.0 device vif3.0 is already a member of a bridge; can't enslave it to bridge xenbr0. Any ideas on next steps are greatly appreciated!

  Read the article

• How to move a line of sprites in a sine wave?

  - by electroflame

  So, I'm spawning a horizontal line of enemies that I would like to have move in a nice wave. Currently I tried: Enemy.position.X += Enemy.velocity.X; Enemy.position.Y += -(float)Math.Cos(Enemy.position.X / 200) * 5; This...kind of works. But the wave is not a true wave. The top and bottom of one pass are not the same (e.g. 5 for the top, and -5 for the bottom (I don't mean literal points, I just meant that it's not symmetrical)). Is there a better way to do this? I would like the whole line to move in a wave, so it looks fluid. By that, I mean that it should look like each enemy is "following" the one in front of it. The code I posted does have this fluidity to it, but like I said, it's not a perfect wave. Any ideas? Thanks in advance.

  Read the article

• "mountall: Disconnected from Plymouth" error in VirtualBox

  - by jonpavelich

  I installed Ubuntu (from the 11.10 Alternate CD, selecting "command-line only" mode before installing) in Virtualbox (Mac OS X Lion host) like I've done numerous times before. Installation finished without any problems, and I rebooted into my new system. Got the splash screen, it loaded, and right where it should've given me a login prompt, I got (in orange) mountall: Disconnected from Plymouth. I can just hit control + alt (option) + F1 to get the login prompt on tty1, and the system acts normally. This happens on every boot. The disk has two partitions, a 250 MB /boot partition and a 99.75 GB encrypted partition. The encrypted partition has LVM on it. One volume group, 3 volumes (swap, / (root filesystem) , and /home. At first I thought the error was from one of the LVM volumes not mounting, but they are all accessible. It isn't a critical error, but it is annoying. Any ideas?

  Read the article

• Giant battery consumption with dual graphics solution (only i-gpu working)

  - by Noel

  I use a Laptop with Intel Core i7 SandyBridge and integrated Intel HD3000 graphics as well as a Nvidia Geforce GTS 555M. So far, I got the impression my Laptop was running with the Nvidia graphics adapter only because the fan was always running on highest speed (and loudest noise) and it was getting very hot even when doing nothing. Also the battery is empty after ~40-50 minutes (while having ~4-5 hours with Intel graphics in Win7). Since this can't be healthy I wanted to switch to the integrated graphics instead. I was fairly surprised when the System Information showed me that the as graphics adapter I use "Intel M". Why is my battery empty so fast with Ubuntu? Without using the NVIDIA graphics adapter? Summary: I DONT WANT to use the Nvidia graphics adapter (OPTIMUS), I just want the Intel solution. As I have understood, the Intel solution is running already, emptying my battery 10x as fast as Win7. What is wrong? Any ideas?

  Read the article

• Maximize, minimize and close buttons are either not present or not working in Lubuntu

  - by jimirings

  As the title indicates, the maximize, minimize, and close buttons are either not present or not working on my Lubuntu desktop. In fact, it only seems to be Google Chrome that displays the buttons at all, and only the close button works in Chrome, maximize and minimize don't do anything. When I use regular Ubuntu, they're all there just fine but not on Lubuntu. This all seemed to occur after I hooked my netbook up to an external monitor while using Lubuntu. Not sure if that had anything to do with it or not, but it seemed too big of a coincidence to not mention. Any ideas what the cause and a fix might be? Thanks in advance.

  Read the article

• HLSL: Pack 4 values into 32 bit float.

  - by TheBigO

  I can't find any useful information on packing 4 values into a 32 bit float in HLSL. Ideally, what I want to be able to do in HLSL is: float4 values = ... // Some values where each component is between 0 and 1. float packedValues = pack32R(values); float4 values2 = unpack32R(packedValues); I realize that there will be precision limitations, and performance tradeoffs between different precisions in different methods. I'm just wondering what ideas are out there.

  Read the article

• A simple message room

  - by webbyJoe

  Can anyone recommend a simple message room (not chat room) which I can use for a private communication between my users. My idea: to grant some users (2-3 at the most) a specific privilege to talk privately in a message room. none of them would be administrator there. I need such features: - admin panel for adding users allowed to post messages in room - room invisible to anyone except users - filtering not-allowed words - Ajax-enabled so that replies appear immediately - other message room features I have a linux hosting so PHP message room would be the best option. I thought of using a forum for this, but it's too much work as a forum is public by nature and I need something private by nature. Any ideas? Thanks in advance.

  Read the article

• How to cleanup a Local Repository?

  - by maythux

  In my local repository each time i update the packages inside. The problem is: I have many versions of the same package. so, i need to delete the old versions in some way.(don't tell me to do it manually!!) Any ideas?!! Maybe a script that checks the version of each package keeping the newer version and deletind older ones can solve this issue. I am seeking for such script or if some software is founded would be great UPDATE: See this for how to make a local repository

  Read the article

• 302 Redirect causes garbage at end of Wordpress link in Facebook

  - by Joao

  When I try to link my Wordpress blog to Facebook, the url doesn't resolve properly. There's garbage appended at the end and Facebook is not able to retrieve information from the site. Happens in every page, post or main entry. Here's what happens: http://clarissarezende.com.br/ shows up in Facebook as http://clarissarezende.com.br/UPLcS/ (when copy/paste the link) and no information about the site shows up in FB. I'm using Wordpress 3.3.1 with ProPhoto 4. Recently I moved the DNS entry on my ISP. The blog is hosted at clarissarezende.com.br/public_html/blog2 and before the DNS would point to public_html and then I changed it to public_html/blog2. Note that I did not move any Wordpress files. Made the (I think) necessary changes all over Facebook, but still no dice... Any ideas on what can be happening?

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >