Search Results

Search found 13356 results on 535 pages for 'index buffers'.

Page 96/535 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• How does landscape calculate free memory?

  - by David Planella

  I'm trying to debug an OOM situation in an Ubuntu 12.04 server, and looking at the Memory graphs in Landscape, I noticed that there wasn't any serious memory usage spike spike. Then I looked at the output of the free command and I wasn't quite sure how both memory usage results relate to each other. Here's landscape's output on the server: $ landscape-sysinfo System load: 0.0 Processes: 93 Usage of /: 5.6% of 19.48GB Users logged in: 1 Memory usage: 26% IP address for eth0: - Swap usage: 2% Then I run the free command and I get: $ free -m total used free shared buffers cached Mem: 486 381 105 0 4 165 -/+ buffers/cache: 212 274 Swap: 255 7 248 I can understand the 2% swap usage, but where does the 26% memory usage come from?

  Read the article

• ubuntu is very slow

  - by johnny smithens

  Hello all. I am new with Ubuntu, and it is very slow(even in Ubuntu 2D). The performance is degraded for almost any task. I just reinstalled with amd64, and tried updating the Nvidia drivers with Nvidia Xserver. but it made no difference. This is the output of free -m: total used free shared buffers cached Mem: 3006 1318 1688 0 61 699 -/+ buffers/cache: 556 2449 Swap: 3064 0 3064 tl;dr - total: 3006, used: 1318 When I see the virtual console with Ctrl+Alt+F2, I see constantly: Assuming Drive Cache: write through; asking for cache data failed; It is very frustrating. Thanks in advance!

  Read the article

• RAM Cache always full

  - by Tobias

  I have 6GB RAM, i5 2.4GHZ Processor running Ubuntu 11.10. When streaming online or opening several tabs in Chromium I soon have 4GB Memory in the cache. And this makes my Notebook slow. When streaming a video, after a few minutes it really slows down and stumbles/jerks. I partitioned my HD so that I have 8GB swap. What could the problem be? How can I solve this? P.s: initially I had 4gb and recently upgraded to 6GB, but I did not experience a significant change. P.P.S: if I enter "free -g" in the terminal this is the result: total used free shared buffers cached Mem: 5 2 3 0 0 0 -/+ buffers/cache: 1 4 Swap: 8 0 8

  Read the article

• 64 bit Ubuntu sees half my RAM

  - by koehn

  This is on my AMD FX(tm)-4100 Quad-Core Processor (according to /proc/cpuinfo) on a machine with two 4GB RAM DIMMs. BIOS shows 8GB RAM installed. Any help would be appreciated. RAM: Extreme Performance Sector 5 G Series 8GB DDR3-1333 (PC3-1066) Enhanced Latency Dual Channel Desktop Memory Kit (Two 4GB Memory Modules) MB: GA-78LMT-S2P Socket AM3+ 760G mATX AMD Motherboard CPU: FX 4100 Black Edition 3.6GHz Quad-Core Socket AM3+ Boxed Processor Here's what the software says: $ free total used free shared buffers cached Mem: 3515100 3293656 221444 0 19260 2670352 -/+ buffers/cache: 604044 2911056 Swap: 3650556 90916 3559640 $ uname -a Linux mythbuntu 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux From lshw: *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 4GiB *-bank:0 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 0 serial: None slot: A0 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-bank:1 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 1 serial: None slot: A1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns)

  Read the article

• New host, high load?

  - by dotancohen

  A few minutes ago I signed up at a new webhost. I have yet to move my sites over. Upon initial SSH connection, I checked the load and memory usage, they do seem rather higher than I would like: # uptime 12:06:51 up 71 days, 23:23, 1 user, load average: 9.02, 9.49, 9.45 # free total used free shared buffers cached Mem: 33014800 31927192 1087608 0 2384812 17729816 -/+ buffers/cache: 11812564 21202236 Swap: 16787916 8584 16779332 Is that a bit to packed? I'm only paying about $5 USD per month, so I don't expect <0.1 loads, but ~10 is worrisome. Is it not? Also, there is no /etc/issue file so I tried other methods to guess the OS: # uname -a Linux box358.bluehost.com 2.6.32-20120131.55.1.bh6.x86_64 #1 SMP Tue Jan 31 15:43:27 EST 2012 x86_64 x86_64 x86_64 GNU/Linux # which yum /usr/bin/yum # which apt-get # That looks like CentOS / RHEL 6.2 possibly?

  Read the article

• Actor and Sprite, who should own these properties?

  - by Gerardo Marset

  I'm writing sort of a 2D game engine for making the process of creating games easier. It has two classes, Actor and Sprite. Actor is used for interactive elements (the player, enemies, bullets, a menu, an invisible instance that controls score, etc) and Sprite is used for animated (or not) images with transparency (or not). The actor may have an assigned sprite that represents it on the screen, which may change during the game. E.g. in a top-down action game you may have an actor with a sprite of a little guy that changes when attacking, walking, and facing different directions, etc. Currently the actor has x and y properties (its coordinates in the screen), while the sprite has an index property (the number of the frame currently being shown by the sprite). Since the sprite doesn't know which actor it belongs to (or if it belongs to an actor at all), the actor must pass its x and y coordinates when drawing the sprite. Also, since a actors may reset its sprite each frame (and usually do), the sprite's index property must be passed from the old to the new sprite like so (pseudocode): function change_sprite(new_sprite) old_index = my.sprite.index my.sprite = new_sprite() my.sprite.index = old_index % my.sprite.frames end I always thought this was kind of cumbersome, but it never was a big problem. Now I decided to add support for more properties. Namely a property to draw the sprite rotated, a property to draw it flipped, it a property draw it stretched, etc. These should probably belong to the sprite and not the actor, but if they do, the actor would have to pass them from the old to the new sprite each time it changes... On the other hand, if they belonged to the actor, the actor would have to pass each property to the sprite when drawing it (since the sprite doesn't know which actor it belongs to, and it shouldn't, since sprites aren't just meant to be used by actors, really). Another option I thought of would be having an extra class that owns all these properties (plus index, x and y) and links an actor with a sprite, but that doesn't come without drawbacks. So, what should I do with all these properties? Thanks!

  Read the article

• JGridView (Part 2)

  - by Geertjan

  The second sample in the JGrid download is a picture viewer that needs to be seen to be believed. Here it is, integrated into a NetBeans Platform application (click to enlarge it): When you mouse over the images, they change, showing several different images instantaneously. Here's the explorer view above, mainly making use of code from the sample: public class JGridView extends JScrollPane { @Override public void addNotify() { super.addNotify(); final ExplorerManager em = ExplorerManager.find(this); if (em != null) { final JGrid grid = new JGrid(); Node root = em.getRootContext(); final Node[] nodes = root.getChildren().getNodes(); final PicViewerObject[] pics = new PicViewerObject[nodes.length]; for (int i = 0; i < nodes.length; i++) { Node node = nodes[i]; pics[i] = node.getLookup().lookup(PicViewerObject.class); } grid.getCellRendererManager().setDefaultRenderer(new PicViewerRenderer()); grid.setModel(new DefaultListModel() { @Override public int getSize() { return pics.length; } @Override public Object getElementAt(int i) { return pics[i]; } }); grid.setFixedCellDimension(160); grid.addMouseMotionListener(new MouseAdapter() { int lastIndex = -1; @Override public void mouseMoved(MouseEvent e) { if (lastIndex >= 0) { Object o = grid.getModel().getElementAt(lastIndex); if (o instanceof PicViewerObject) { Rectangle r = grid.getCellBounds(lastIndex); if (r != null && !r.contains(e.getPoint())) { ((PicViewerObject) o).setMarker(false); grid.repaint(r); } } } int index = grid.getCellAt(e.getPoint()); if (index >= 0) { Object o = grid.getModel().getElementAt(index); if (o instanceof PicViewerObject) { Rectangle r = grid.getCellBounds(index); if (r != null) { ((PicViewerObject) o).setFraction(((float) e.getPoint().x - (float) r.x) / (float) r.width); ((PicViewerObject) o).setMarker(true); lastIndex = index; grid.repaint(r); } } } } }); grid.getSelectionModel().addListSelectionListener(new ListSelectionListener() { @Override public void valueChanged(ListSelectionEvent e) { //Somehow compare the selected item //with the list of books and find a matching book: int selectedIndex = grid.getSelectedIndex(); for (int i = 0; i < nodes.length; i++) { int picId = pics[i].getId(); if (selectedIndex == picId) { try { em.setSelectedNodes(new Node[]{nodes[i]}); } catch (PropertyVetoException ex) { Exceptions.printStackTrace(ex); } } } } }); setViewportView(grid); } } } The next step is to create a generic JGridView that will handle any kind of object automatically.

  Read the article

• Can't change color of sprites in unity

  - by Aceleeon

  I would like to create a script that targets a 2d sprite "enemy" and changes their color to red (slightly opaque red if possible) when you hit tab. I have this code from a 3d tutorial hoping the transition would work. But it does not. I only get the script to cycle the enemy tags but never changes the color of the sprite. I have the code below I'm very new to coding, and any help would be FANTASTIC! HELP! hahah. TL;DR Cant get 3d color targeting to work for 2D. Check out the c#code below using UnityEngine; using System.Collections; using System.Collections.Generic; public class Targetting : MonoBehaviour { public List targets; public Transform selectedTarget; private Transform myTransform; // Use this for initialization void Start () { targets = new List(); selectedTarget = null; myTransform = transform; AddAllEnemies(); } public void AddAllEnemies() { GameObject[] go = GameObject.FindGameObjectsWithTag("Enemy"); foreach(GameObject enemy in go) AddTarget(enemy.transform); } public void AddTarget(Transform enemy) { targets.Add(enemy); } private void SortTargetsByDistance() { targets.Sort(delegate(Transform t1,Transform t2) { return Vector3.Distance(t1.position, myTransform.position).CompareTo(Vector3.Distance(t2.position, myTransform.position)); }); } private void TargetEnemy() { if(selectedTarget == null) { SortTargetsByDistance(); selectedTarget = targets[0]; } else { int index = targets.IndexOf(selectedTarget); if(index < targets.Count -1) { index++; } else { index = 0; } selectedTarget = targets[index]; } } private void SelectTarget() { selectedTarget.GetComponent().color = Color.red; } private void DeselectTarget() { selectedTarget.GetComponent().color = Color.blue; selectedTarget = null; } // Update is called once per frame void Update() { if(Input.GetKeyDown(KeyCode.Tab)) { TargetEnemy(); } } }

  Read the article

• Wireless always disconnect

  - by Silas

  I upgraded my Ubuntu 10.10 for Ubuntu 12.04. I have a Emachines E625 With Ubuntu 12.04 my wireless always disconnects every 10 sec. It didn't do that with 10.10. Here is my config: Linux sylvain-eMachines-E625 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 i686 athlon i386 GNU/Linux total used free shared buffers cached Mem: 1759 1425 333 0 46 925 -/+ buffers/cache: 452 1306 Swap: 1788 0 1788 02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 05:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) I will really enjoy an answer to solve this problem. Thank you in advance! Silas

  Read the article

• Java word scramble game [closed]

  - by Dan

  I'm working on code for a word scramble game in Java. I know the code itself is full of bugs right now, but my main focus is getting a vector of strings broken into two separate vectors containing hints and words. The text file that the strings are taken from has a colon separating them. So here is what I have so far. public WordApp() { inputRow = new TextInputBox(); inputRow.setLocation(200,100); phrases = new Vector <String>(FileUtilities.getStrings()); v_hints = new Vector<String>(); v_words = new Vector<String>(); textBox = new TextBox(200,100); textBox.setLocation(200,200); textBox.setText(scrambled + "\n\n Time Left: \t" + seconds/10 + "\n Score: \t" + score); hintBox = new TextBox(200,200); hintBox.setLocation(300,400); hintBox.hide(); Iterator <String> categorize = phrases.iterator(); while(categorize.hasNext()) { int index = phrases.indexOf(":"); String element = categorize.next(); v_words.add(element.substring(0,index)); v_hints.add(element.substring(index +1)); phrases.remove(index); System.out.print(index); } The FileUtilities file was given to us by the pofessor, here it is. import java.util.*; import java.io.*; public class FileUtilities { private static final String FILE_NAME = "javawords.txt"; //------------------ getStrings ------------------------- // // returns a Vector of Strings // Each string is of the form: word:hint // where word contains no spaces. // The words and hints are read from FILE_NAME // // public static Vector<String> getStrings ( ) { Vector<String> words = new Vector<String>(); File file = new File( FILE_NAME ); Scanner scanFile; try { scanFile = new Scanner( file); } catch ( IOException e) { System.err.println( "LineInput Error: " + e.getMessage() ); return null; } while ( scanFile.hasNextLine() ) { // read the word and follow it by a colon String s = scanFile.nextLine().trim().toUpperCase() + ":"; if( s.length()>1 && scanFile.hasNextLine() ) { // append the hint and add to collection s+= scanFile.nextLine().trim(); words.add(s); } } // shuffle Collections.shuffle(words); return words; } }

  Read the article

• XNA VertexBuffer.SetData performance suggestions

  - by CodeSpeaker

  I have a 3d world in a grid layout where each grid cell contains its separate vertex and index buffer for the mesh/terrain of that cell. When the player moves outside the boundaries of his cell, i dynamically load more cells in his walking direction based on his viewing distance. This triggers x number of vertex and indexbuffer initializations depending on how many cells that needs to be generated and causes the framerate to drop annoyingly during this time. The generation of terrain data is handled in a separate thread and runs smoothly. The vertex and index buffers are added during the update cycle of the game loop. I´ve tried batching the number of cells to be processed to avoid sending too much data at once into the buffers, which worked ok at a shorter viewing distance (about 9 cells to process), but not as well at greater distances with around 30 cells to process. Any idea how i can optimize this?

  Read the article

• ?12c database ????Adaptive Execution Plans ????????

  - by Liu Maclean(???)

  12c R1 ????SQL??????- Adaptive Execution Plans ????????,???????optimizer ??????(runtime)???????????????, ????????????????????? SQL???????? ????????????, ?????????????????????????????????????????????????????????????adaptive plan ????????????????????????????????????,?????subplan???????????????????? ??????, ???????? ???????????????,?????????, ?????? ???????????????”???”????, ???????????????????buffer ???????  ????????????,?????,??????????????????? ???optimizer ?????????????????????????,?????????????????????????????????????????plan???? ??12C?????????????, ???????????????????,?????? ???????????? ????????????2???: Dynamic Plans????: ???????????????????????;??????,???optimizer??????????subplans??????????????, ???????????????????,?????????????? Reoptimization????: ?Dynamic Plans????,Reoptimization??????????????????????Reoptimization??,?????????????????????????,??reoptimization????? OPTIMIZER_ADAPTIVE_REPORTING_ONLY ???? report-only????????????????TRUE,?????????report-only????,???????????????,??????????????? Dynamic Plans ??????????????,????????????????????????, ?????????????,???????????,????????????????????????????????????????? ?????????????final plan??????????????default plan, ??final plan?default plan???????,????????????? subplan ???????????????,???????????????????????? ??????,???????statistics collector ?buffer???????????statistics collector?????????????????,???????????????????????????? ?????????????????????????????????????????,??????????,?????????????? ???????????,???????buffer???? ???????????????,?????????????????????????????,??????buffer,??????final plan? ????????,???????????????????????,????????????????? ?V$SQL??????IS_RESOLVED_DYNAMIC_PLAN??????????final plan???default plan? ??????dynamic plan ???????SQL PLAN directives?????? declare cursor PLAN_DIRECTIVE_IDS is select directive_id from DBA_SQL_PLAN_DIRECTIVES; begin for z in PLAN_DIRECTIVE_IDS loop DBMS_SPD.DROP_SQL_PLAN_DIRECTIVE(z.directive_id); end loop; end; / explain plan for select /*MALCEAN*/ product_name from oe.order_items o, oe.product_information p where o.unit_price=15 and quantity>1 and p.product_id=o.product_id; select * from table(dbms_xplan.display()); Plan hash value: 1255158658 www.askmaclean.com ------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 4 | 128 | 7 (0)| 00:00:01 | | 1 | NESTED LOOPS | | | | | | | 2 | NESTED LOOPS | | 4 | 128 | 7 (0)| 00:00:01 | |* 3 | TABLE ACCESS FULL | ORDER_ITEMS | 4 | 48 | 3 (0)| 00:00:01 | |* 4 | INDEX UNIQUE SCAN | PRODUCT_INFORMATION_PK | 1 | | 0 (0)| 00:00:01 | | 5 | TABLE ACCESS BY INDEX ROWID| PRODUCT_INFORMATION | 1 | 20 | 1 (0)| 00:00:01 | ------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 3 - filter("O"."UNIT_PRICE"=15 AND "QUANTITY">1) 4 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") alter session set events '10053 trace name context forever,level 1'; OR alter session set events 'trace[SQL_Plan_Directive] disk highest'; select /*MALCEAN*/ product_name from oe.order_items o, oe.product_information p where o.unit_price=15 and quantity>1 and p.product_id=o.product_id; ---------------------------------------------------------------+-----------------------------------+ | Id | Operation | Name | Rows | Bytes | Cost | Time | ---------------------------------------------------------------+-----------------------------------+ | 0 | SELECT STATEMENT | | | | 7 | | | 1 | HASH JOIN | | 4 | 128 | 7 | 00:00:01 | | 2 | NESTED LOOPS | | | | | | | 3 | NESTED LOOPS | | 4 | 128 | 7 | 00:00:01 | | 4 | STATISTICS COLLECTOR | | | | | | | 5 | TABLE ACCESS FULL | ORDER_ITEMS | 4 | 48 | 3 | 00:00:01 | | 6 | INDEX UNIQUE SCAN | PRODUCT_INFORMATION_PK| 1 | | 0 | | | 7 | TABLE ACCESS BY INDEX ROWID | PRODUCT_INFORMATION | 1 | 20 | 1 | 00:00:01 | | 8 | TABLE ACCESS FULL | PRODUCT_INFORMATION | 1 | 20 | 1 | 00:00:01 | ---------------------------------------------------------------+-----------------------------------+ Predicate Information: ---------------------- 1 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") 5 - filter(("O"."UNIT_PRICE"=15 AND "QUANTITY">1)) 6 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") ===================================== SPD: BEGIN context at statement level ===================================== Stmt: ******* UNPARSED QUERY IS ******* SELECT /*+ OPT_ESTIMATE (@"SEL$1" JOIN ("P"@"SEL$1" "O"@"SEL$1") ROWS=13.000000 ) OPT_ESTIMATE (@"SEL$1" TABLE "O"@"SEL$1" ROWS=13.000000 ) */ "P"."PRODUCT_NAME" "PRODUCT_NAME" FROM "OE"."ORDER_ITEMS" "O","OE"."PRODUCT_INFORMATION" "P" WHERE "O"."UNIT_PRICE"=15 AND "O"."QUANTITY">1 AND "P"."PRODUCT_ID"="O"."PRODUCT_ID" Objects referenced in the statement PRODUCT_INFORMATION[P] 92194, type = 1 ORDER_ITEMS[O] 92197, type = 1 Objects in the hash table Hash table Object 92197, type = 1, ownerid = 6573730143572393221: No Dynamic Sampling Directives for the object Hash table Object 92194, type = 1, ownerid = 17822962561575639002: No Dynamic Sampling Directives for the object Return code in qosdInitDirCtx: ENBLD =================================== SPD: END context at statement level =================================== ======================================= SPD: BEGIN context at query block level ======================================= Query Block SEL$1 (#0) Return code in qosdSetupDirCtx4QB: NOCTX ===================================== SPD: END context at query block level ===================================== SPD: Return code in qosdDSDirSetup: NOCTX, estType = TABLE SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92197, objtyp = 1, vecsize = 6, colvec = [4, 5, ], fid = 2896834833840853267 SPD: Inserted felem, fid=2896834833840853267, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = YES, keep = YES SPD: qosdCreateFindingSingTab retCode = CREATED, fid = 2896834833840853267 SPD: qosdCreateDirCmp retCode = CREATED, fid = 2896834833840853267 SPD: Return code in qosdDSDirSetup: NOCTX, estType = TABLE SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = JOIN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SKIP_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = JOIN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92197, objtyp = 1, vecsize = 6, colvec = [4, 5, ], fid = 2896834833840853267 SPD: Modified felem, fid=2896834833840853267, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = YES, keep = YES SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92194, objtyp = 1, vecsize = 2, colvec = [1, ], fid = 5618517328604016300 SPD: Modified felem, fid=5618517328604016300, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = NO, keep = NO SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92194, objtyp = 1, vecsize = 2, colvec = [1, ], fid = 1142802697078608149 SPD: Modified felem, fid=1142802697078608149, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = NO, keep = NO SPD: Generating finding id: type = 1, reason = 2, objcnt = 2, obItr = 0, objid = 92194, objtyp = 1, vecsize = 0, obItr = 1, objid = 92197, objtyp = 1, vecsize = 0, fid = 1437680122701058051 SPD: Modified felem, fid=1437680122701058051, ftype = 1, freason = 2, dtype = 0, dstate = 0, dflag = 0, ver = NO, keep = NO select * from table(dbms_xplan.display_cursor(format=>'report')) ; ????report????adaptive plan Adaptive plan: ------------- This cursor has an adaptive plan, but adaptive plans are enabled for reporting mode only.  The plan that would be executed if adaptive plans were enabled is displayed below. ------------------------------------------------------------------------------------------ | Id  | Operation          | Name                | Rows  | Bytes | Cost (%CPU)| Time     | ------------------------------------------------------------------------------------------ |   0 | SELECT STATEMENT   |                     |       |       |     7 (100)|          | |*  1 |  HASH JOIN         |                     |     4 |   128 |     7   (0)| 00:00:01 | |*  2 |   TABLE ACCESS FULL| ORDER_ITEMS         |     4 |    48 |     3   (0)| 00:00:01 | |   3 |   TABLE ACCESS FULL| PRODUCT_INFORMATION |     1 |    20 |     1   (0)| 00:00:01 | ------------------------------------------------------------------------------------------ SQL> select SQL_ID,IS_RESOLVED_DYNAMIC_PLAN,sql_text from v$SQL WHERE SQL_TEXT like '%MALCEAN%' and sql_text not like '%like%'; SQL_ID IS -------------------------- -- SQL_TEXT -------------------------------------------------------------------------------- 6ydj1bn1bng17 Y select /*MALCEAN*/ product_name from oe.order_items o, oe.product_information p where o.unit_price=15 and quantity>1 and p.product_id=o.product_id ???? explain plan for ????default plan, ??????optimizer???final plan,??V$SQL.IS_RESOLVED_DYNAMIC_PLAN???Y,????????????? DBA_SQL_PLAN_DIRECTIVES?????????????SQL PLAN DIRECTIVES, ???12c? ???MMON?????DML ???column usage??????????,????SMON??? MMON????SGA??PLAN DIRECTIVES??? ?????DBMS_SPD.flush_sql_plan_directive???? select directive_id,type,reason from DBA_SQL_PLAN_DIRECTIVES / DIRECTIVE_ID TYPE REASON ----------------------------------- -------------------------------- ----------------------------- 10321283028317893030 DYNAMIC_SAMPLING JOIN CARDINALITY MISESTIMATE 4757086536465754886 DYNAMIC_SAMPLING JOIN CARDINALITY MISESTIMATE 16085268038103121260 DYNAMIC_SAMPLING JOIN CARDINALITY MISESTIMATE SQL> set pages 9999 SQL> set lines 300 SQL> col state format a5 SQL> col subobject_name format a11 SQL> col col_name format a11 SQL> col object_name format a13 SQL> select d.directive_id, o.object_type, o.object_name, o.subobject_name col_name, d.type, d.state, d.reason 2 from dba_sql_plan_directives d, dba_sql_plan_dir_objects o 3 where d.DIRECTIVE_ID=o.DIRECTIVE_ID 4 and o.object_name in ('ORDER_ITEMS') 5 order by d.directive_id; DIRECTIVE_ID OBJECT_TYPE OBJECT_NAME COL_NAME TYPE STATE REASON ------------ ------------ ------------- ----------- -------------------------------- ----- ------------------------------------- --- 1.8156E+19 COLUMN ORDER_ITEMS UNIT_PRICE DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE 1.8156E+19 TABLE ORDER_ITEMS DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE 1.8156E+19 COLUMN ORDER_ITEMS QUANTITY DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE DBA_SQL_PLAN_DIRECTIVES????? _BASE_OPT_DIRECTIVE ? _BASE_OPT_FINDING SELECT d.dir_own#, d.dir_id, d.f_id, decode(type, 1, 'DYNAMIC_SAMPLING', 'UNKNOWN'), decode(state, 1, 'NEW', 2, 'MISSING_STATS', 3, 'HAS_STATS', 4, 'CANDIDATE', 5, 'PERMANENT', 6, 'DISABLED', 'UNKNOWN'), decode(bitand(flags, 1), 1, 'YES', 'NO'), cast(d.created as timestamp), cast(d.last_modified as timestamp), -- Please see QOSD_DAYS_TO_UPDATE and QOSD_PLUS_SECONDS for more details -- about 6.5 cast(d.last_used as timestamp) - NUMTODSINTERVAL(6.5, 'day') FROM sys.opt_directive$ d ??dbms_spd??? SQL PLAN DIRECTIVES, SQL PLAN DIRECTIVES???retention ???53?: Package: DBMS_SPD This package provides subprograms for managing Sql Plan Directives(SPD). SPD are objects generated automatically by Oracle server. For example, if server detects that the single table cardinality estimated by optimizer is off from the actual number of rows returned when accessing the table, it will automatically create a directive to do dynamic sampling for the table. When any Sql statement referencing the table is compiled, optimizer will perform dynamic sampling for the table to get more accurate estimate. Notes: DBMSL_SPD is a invoker-rights package. The invoker requires ADMINISTER SQL MANAGEMENT OBJECT privilege for executing most of the subprograms of this package. Also the subprograms commit the current transaction (if any), perform the operation and commit it again. DBA view dba_sql_plan_directives shows all the directives created in the system and the view dba_sql_plan_dir_objects displays the objects that are included in the directives. -- Default value for SPD_RETENTION_WEEKS SPD_RETENTION_WEEKS_DEFAULT CONSTANT varchar2(4) := '53'; | STATE : NEW : Newly created directive. | : MISSING_STATS : The directive objects do not | have relevant stats. | : HAS_STATS : The objects have stats. | : PERMANENT : A permanent directive. Server | evaluated effectiveness and these | directives are useful. | | AUTO_DROP : YES : Directive will be dropped | automatically if not | used for SPD_RETENTION_WEEKS. | This is the default behavior. | NO : Directive will not be dropped | automatically. Procedure: flush_sql_plan_directive This procedure allows manually flushing the Sql Plan directives that are automatically recorded in SGA memory while executing sql statements. The information recorded in SGA are periodically flushed by oracle background processes. This procedure just provides a way to flush the information manually. ????”_optimizer_dynamic_plans”(enable dynamic plans)????????,???TRUE??DYNAMIC PLAN? ???FALSE???????????? ????,Dynamic Plan????????????Nested Loop?Hash Join???case ,????????Nested loop???????????HASH JOIN,?HASH JOIN????????????????? ????????subplan?????,???? pass?? ?join method???,?????STATISTICS COLLECTOR???cardinality?,???????HASH JOIN?????Nested Loop,????????????subplan?????access path; ???????Sales??????????????????,????HASH JOIN,??SUBPLAN??customers?????????;?????Nested Loop,???????cust_id?????Range Scan+Access by Rowid? Cardinality feedback Cardinality feedback????????11.2????,????????re-optimization???;  ???????????,Cardinality feedback?????????????????????????? ???????????????????,?????????????????,??????????Cardinality feedback????????????? ????????????????????????? ??????????????Cardinality feedback ??: ????????,???????????,??????????,????????????????selectivity ??? ????????????: ??????,?????????????????????????????????,??????????????????? ????????????????????????????????????????,?????????????????????????? ?????????,???????????????,?????????? ??????????Cardinality ????,??????join Cardinality ????????? Cardinality feedback???????cursor?,?Cursor???aged out????? SELECT /*+ gather_plan_statistics */ product_name FROM order_items o, product_information p WHERE o.unit_price = 15 AND quantity > 1 AND p.product_id = o.product_id Plan hash value: 1553478007 ---------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | OMem | 1Mem | Used-Mem | ---------------------------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 13 |00:00:00.01 | 24 | 20 | | | | |* 1 | HASH JOIN | | 1 | 4 | 13 |00:00:00.01 | 24 | 20 | 2061K| 2061K| 429K (0)| |* 2 | TABLE ACCESS FULL| ORDER_ITEMS | 1 | 4 | 13 |00:00:00.01 | 7 | 6 | | | | | 3 | TABLE ACCESS FULL| PRODUCT_INFORMATION | 1 | 1 | 288 |00:00:00.01 | 17 | 14 | | | | ---------------------------------------------------------------------------------------------------------------------------------------- SELECT /*+ gather_plan_statistics */ product_name FROM order_items o, product_information p WHERE o.unit_price = 15 AND quantity > 1 AND p.product_id = o.product_id Plan hash value: 1553478007 ------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem | ------------------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 13 |00:00:00.01 | 24 | | | | |* 1 | HASH JOIN | | 1 | 13 | 13 |00:00:00.01 | 24 | 2061K| 2061K| 413K (0)| |* 2 | TABLE ACCESS FULL| ORDER_ITEMS | 1 | 13 | 13 |00:00:00.01 | 7 | | | | | 3 | TABLE ACCESS FULL| PRODUCT_INFORMATION | 1 | 288 | 288 |00:00:00.01 | 17 | | | | ------------------------------------------------------------------------------------------------------------------------------- Note ----- - statistics feedback used for this statement SQL> select count(*) from v$SQL where SQL_ID='cz0hg2zkvd10y'; COUNT(*) ---------- 2 SQL>select sql_ID,USE_FEEDBACK_STATS FROM V$SQL_SHARED_CURSOR where USE_FEEDBACK_STATS ='Y'; SQL_ID U ------------- - cz0hg2zkvd10y Y ????????Cardinality feedback????,???????????????????????????,????????????order_items???????? ????2??????plan hash value??(??????????),?????2????child cursor??????gather_plan_statistics???actual : A-ROWS  estimate :E-ROWS????????? Automatic Re-optimization ???dynamic plan, Re-optimization???????????????  ?  ??????????????? ????????????????????????????????  ???????????,??????????????, ???????????????????? ???????????  Re-optimization??, ????????????????????? Re-optimization????dynamic plan??????????  dynamic plan????????????????????, ???????????????????? ????,??????????join order ??????????????,?????????????join order????? ??????,????????Re-optimization, ??Re-optimization ??????????????????? ?Oracle database 12c?,join statistics?????????????????????,??????????????????????Re-optimization???????????adaptive cursor sharing????? ????????????????,???????????? ????? ???????statistics collectors ????????????????????Re-optimization??????2?????????????,???????????????? ??????????????Re-optimization?????,?????????????????????? ???v$SQL??????IS_REOPTIMIZABLE?????????????????????Re-optimization,??????????Re-optimization???,?????Re-optimization ,???????reporting????? IS_REOPTIMIZABLE VARCHAR2(1) This columns shows whether the next execution matching this child cursor will trigger a reoptimization. The values are:   Y: If the next execution will trigger a reoptimization R: If the child cursor contains reoptimization information, but will not trigger reoptimization because the cursor was compiled in reporting mode N: If the child cursor has no reoptimization information ??1: select plan_table_output from table (dbms_xplan.display_cursor('gwf99gfnm0t7g',NULL,'ALLSTATS LAST')); SQL_ID  gwf99gfnm0t7g, child number 0 ------------------------------------- SELECT /*+ SFTEST gather_plan_statistics */ o.order_id, v.product_name FROM  orders o,   ( SELECT order_id, product_name FROM order_items o, product_information p     WHERE  p.product_id = o.product_id AND list_price < 50 AND min_price < 40  ) v WHERE o.order_id = v.order_id Plan hash value: 1906736282 ------------------------------------------------------------------------------------------------------------------------------------------- | Id  | Operation             | Name                | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |  OMem |  1Mem | Used-Mem | ------------------------------------------------------------------------------------------------------------------------------------------- |   0 | SELECT STATEMENT      |                     |      1 |        |    269 |00:00:00.02 |    1336 |     18 |       |       |          | |   1 |  NESTED LOOPS         |                     |      1 |      1 |    269 |00:00:00.02 |    1336 |     18 |       |       |          | |   2 |   MERGE JOIN CARTESIAN|                     |      1 |      4 |   9135 |00:00:00.02 |      34 |     15 |       |       |          | |*  3 |    TABLE ACCESS FULL  | PRODUCT_INFORMATION |      1 |      1 |     87 |00:00:00.01 |      33 |     14 |       |       |          | |   4 |    BUFFER SORT        |                     |     87 |    105 |   9135 |00:00:00.01 |       1 |      1 |  4096 |  4096 | 4096  (0)| |   5 |     INDEX FULL SCAN   | ORDER_PK            |      1 |    105 |    105 |00:00:00.01 |       1 |      1 |       |       |          | |*  6 |   INDEX UNIQUE SCAN   | ORDER_ITEMS_UK      |   9135 |      1 |    269 |00:00:00.01 |    1302 |      3 |       |       |          | ------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): ---------------------------------------------------    3 - filter(("MIN_PRICE"<40 AND "LIST_PRICE"<50))    6 - access("O"."ORDER_ID"="ORDER_ID" AND "P"."PRODUCT_ID"="O"."PRODUCT_ID") SQL_ID  gwf99gfnm0t7g, child number 1 ------------------------------------- SELECT /*+ SFTEST gather_plan_statistics */ o.order_id, v.product_name FROM  orders o,   ( SELECT order_id, product_name FROM order_items o, product_information p     WHERE  p.product_id = o.product_id AND list_price < 50 AND min_price < 40  ) v WHERE o.order_id = v.order_id Plan hash value: 35479787 -------------------------------------------------------------------------------------------------------------------------------------------- | Id  | Operation              | Name                | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |  OMem |  1Mem | Used-Mem | -------------------------------------------------------------------------------------------------------------------------------------------- |   0 | SELECT STATEMENT       |                     |      1 |        |    269 |00:00:00.01 |      63 |      3 |       |       |          | |   1 |  NESTED LOOPS          |                     |      1 |    269 |    269 |00:00:00.01 |      63 |      3 |       |       |          | |*  2 |   HASH JOIN            |                     |      1 |    313 |    269 |00:00:00.01 |      42 |      3 |  1321K|  1321K| 1234K (0)| |*  3 |    TABLE ACCESS FULL   | PRODUCT_INFORMATION |      1 |     87 |     87 |00:00:00.01 |      16 |      0 |       |       |          | |   4 |    INDEX FAST FULL SCAN| ORDER_ITEMS_UK      |      1 |    665 |    665 |00:00:00.01 |      26 |      3 |       |       |          | |*  5 |   INDEX UNIQUE SCAN    | ORDER_PK            |    269 |      1 |    269 |00:00:00.01 |      21 |      0 |       |       |          | -------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): ---------------------------------------------------    2 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID")    3 - filter(("MIN_PRICE"<40 AND "LIST_PRICE"<50))    5 - access("O"."ORDER_ID"="ORDER_ID") Note -----    - statistics feedback used for this statement    SQL> select IS_REOPTIMIZABLE,child_number FROM V$SQL  A where A.SQL_ID='gwf99gfnm0t7g'; IS CHILD_NUMBER -- ------------ Y             0 N             1    1* select child_number,other_xml From v$SQL_PLAN  where SQL_ID='gwf99gfnm0t7g' and other_xml is not nul SQL> / CHILD_NUMBER OTHER_XML ------------ --------------------------------------------------------------------------------            1 <other_xml><info type="cardinality_feedback">yes</info><info type="db_version">1              2.1.0.1</info><info type="parse_schema"><![CDATA["OE"]]></info><info type="plan_              hash">35479787</info><info type="plan_hash_2">3382491761</info><outline_data><hi              nt><![CDATA[IGNORE_OPTIM_EMBEDDED_HINTS]]></hint><hint><![CDATA[OPTIMIZER_FEATUR              ES_ENABLE('12.1.0.1')]]></hint><hint><![CDATA[DB_VERSION('12.1.0.1')]]></hint><h              int><![CDATA[ALL_ROWS]]></hint><hint><![CDATA[OUTLINE_LEAF(@"SEL$F5BB74E1")]]></              hint><hint><![CDATA[MERGE(@"SEL$2")]]></hint><hint><![CDATA[OUTLINE(@"SEL$1")]]>              </hint><hint><![CDATA[OUTLINE(@"SEL$2")]]></hint><hint><![CDATA[FULL(@"SEL$F5BB7              4E1" "P"@"SEL$2")]]></hint><hint><![CDATA[INDEX_FFS(@"SEL$F5BB74E1" "O"@"SEL$2"              ("ORDER_ITEMS"."ORDER_ID" "ORDER_ITEMS"."PRODUCT_ID"))]]></hint><hint><![CDATA[I              NDEX(@"SEL$F5BB74E1" "O"@"SEL$1" ("ORDERS"."ORDER_ID"))]]></hint><hint><![CDATA[              LEADING(@"SEL$F5BB74E1" "P"@"SEL$2" "O"@"SEL$2" "O"@"SEL$1")]]></hint><hint><![C              DATA[USE_HASH(@"SEL$F5BB74E1" "O"@"SEL$2")]]></hint><hint><![CDATA[USE_NL(@"SEL$              F5BB74E1" "O"@"SEL$1")]]></hint></outline_data></other_xml>            0 <other_xml><info type="db_version">12.1.0.1</info><info type="parse_schema"><![C              DATA["OE"]]></info><info type="plan_hash">1906736282</info><info type="plan_hash              _2">2579473118</info><outline_data><hint><![CDATA[IGNORE_OPTIM_EMBEDDED_HINTS]]>              </hint><hint><![CDATA[OPTIMIZER_FEATURES_ENABLE('12.1.0.1')]]></hint><hint><![CD              ATA[DB_VERSION('12.1.0.1')]]></hint><hint><![CDATA[ALL_ROWS]]></hint><hint><![CD              ATA[OUTLINE_LEAF(@"SEL$F5BB74E1")]]></hint><hint><![CDATA[MERGE(@"SEL$2")]]></hi              nt><hint><![CDATA[OUTLINE(@"SEL$1")]]></hint><hint><![CDATA[OUTLINE(@"SEL$2")]]>              </hint><hint><![CDATA[FULL(@"SEL$F5BB74E1" "P"@"SEL$2")]]></hint><hint><![CDATA[              INDEX(@"SEL$F5BB74E1" "O"@"SEL$1" ("ORDERS"."ORDER_ID"))]]></hint><hint><![CDATA              [INDEX(@"SEL$F5BB74E1" "O"@"SEL$2" ("ORDER_ITEMS"."ORDER_ID" "ORDER_ITEMS"."PROD              UCT_ID"))]]></hint><hint><![CDATA[LEADING(@"SEL$F5BB74E1" "P"@"SEL$2" "O"@"SEL$1              " "O"@"SEL$2")]]></hint><hint><![CDATA[USE_MERGE_CARTESIAN(@"SEL$F5BB74E1" "O"@"              SEL$1")]]></hint><hint><![CDATA[USE_NL(@"SEL$F5BB74E1" "O"@"SEL$2")]]></hint></o              utline_data></other_xml> ??2: SELECT /*+gather_plan_statistics*/ * FROM customers WHERE cust_state_province='CA' AND country_id='US'; SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(FORMAT=>'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ------------------------------------- SQL_ID b74nw722wjvy3, child number 0 ------------------------------------- select /*+gather_plan_statistics*/ * from customers where CUST_STATE_PROVINCE='CA' and country_id='US' Plan hash value: 1683234692 -------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | -------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 29 |00:00:00.01 | 17 | 14 | |* 1 | TABLE ACCESS FULL| CUSTOMERS | 1 | 8 | 29 |00:00:00.01 | 17 | 14 | -------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter(("CUST_STATE_PROVINCE"='CA' AND "COUNTRY_ID"='US')) SELECT SQL_ID, CHILD_NUMBER, SQL_TEXT, IS_REOPTIMIZABLE FROM V$SQL WHERE SQL_TEXT LIKE 'SELECT /*+gather_plan_statistics*/%'; SQL_ID CHILD_NUMBER SQL_TEXT I ------------- ------------ ----------- - b74nw722wjvy3 0 select /*+g Y ather_plan_ statistics* / * from cu stomers whe re CUST_STA TE_PROVINCE ='CA' and c ountry_id=' US' EXEC DBMS_SPD.FLUSH_SQL_PLAN_DIRECTIVE; SELECT TO_CHAR(d.DIRECTIVE_ID) dir_id, o.OWNER, o.OBJECT_NAME, o.SUBOBJECT_NAME col_name, o.OBJECT_TYPE, d.TYPE, d.STATE, d.REASON FROM DBA_SQL_PLAN_DIRECTIVES d, DBA_SQL_PLAN_DIR_OBJECTS o WHERE d.DIRECTIVE_ID=o.DIRECTIVE_ID AND o.OWNER IN ('SH') ORDER BY 1,2,3,4,5; DIR_ID OWNER OBJECT_NAME COL_NAME OBJECT TYPE STATE REASON ----------------------- ----- ------------- ----------- ------ ---------------- ----- ------------------------ 1484026771529551585 SH CUSTOMERS COUNTRY_ID COLUMN DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE 1484026771529551585 SH CUSTOMERS CUST_STATE_ COLUMN DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY PROVINCE MISESTIMATE 1484026771529551585 SH CUSTOMERS TABLE DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE SELECT /*+gather_plan_statistics*/ * FROM customers WHERE cust_state_province='CA' AND country_id='US'; ELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(FORMAT=>'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ------------------------------------- SQL_ID b74nw722wjvy3, child number 1 ------------------------------------- select /*+gather_plan_statistics*/ * from customers where CUST_STATE_PROVINCE='CA' and country_id='US' Plan hash value: 1683234692 ----------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | ----------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 29 |00:00:00.01 | 17 | |* 1 | TABLE ACCESS FULL| CUSTOMERS | 1 | 29 | 29 |00:00:00.01 | 17 | ----------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter(("CUST_STATE_PROVINCE"='CA' AND "COUNTRY_ID"='US')) Note ----- - cardinality feedback used for this statement SELECT SQL_ID, CHILD_NUMBER, SQL_TEXT, IS_REOPTIMIZABLE FROM V$SQL WHERE SQL_TEXT LIKE 'SELECT /*+gather_plan_statistics*/%'; SQL_ID CHILD_NUMBER SQL_TEXT I ------------- ------------ ----------- - b74nw722wjvy3 0 select /*+g Y ather_plan_ statistics* / * from cu stomers whe re CUST_STA TE_PROVINCE ='CA' and c ountry_id=' US' b74nw722wjvy3 1 select /*+g N ather_plan_ statistics* / * from cu stomers whe re CUST_STA TE_PROVINCE ='CA' and c ountry_id=' US' SELECT /*+gather_plan_statistics*/ CUST_EMAIL FROM CUSTOMERS WHERE CUST_STATE_PROVINCE='MA' AND COUNTRY_ID='US'; SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(FORMAT=>'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ------------------------------------- SQL_ID 3tk6hj3nkcs2u, child number 0 ------------------------------------- Select /*+gather_plan_statistics*/ cust_email From customers Where cust_state_province='MA' And country_id='US' Plan hash value: 1683234692 ------------------------------------------------------------------------------- |Id | Operation | Name | Starts|E-Rows|A-Rows| A-Time |Buffers| ------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 2 |00:00:00.01| 16 | |*1 | TABLE ACCESS FULL| CUSTOMERS | 1 | 2| 2 |00:00:00.01| 16 | ----------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter(("CUST_STATE_PROVINCE"='MA' AND "COUNTRY_ID"='US')) Note ----- - dynamic sampling used for this statement (level=2) - 1 Sql Plan Directive used for this statement EXEC DBMS_SPD.FLUSH_SQL_PLAN_DIRECTIVE; SELECT TO_CHAR(d.DIRECTIVE_ID) dir_id, o.OWNER, o.OBJECT_NAME, o.SUBOBJECT_NAME col_name, o.OBJECT_TYPE, d.TYPE, d.STATE, d.REASON FROM DBA_SQL_PLAN_DIRECTIVES d, DBA_SQL_PLAN_DIR_OBJECTS o WHERE d.DIRECTIVE_ID=o.DIRECTIVE_ID AND o.OWNER IN ('SH') ORDER BY 1,2,3,4,5; DIR_ID OW OBJECT_NA COL_NAME OBJECT TYPE STATE REASON ------------------- -- --------- ---------- ------- --------------- ------------- ------------------------ 1484026771529551585 SH CUSTOMERS COUNTRY_ID COLUMN DYNAMIC_SAMPLING MISSING_STATS SINGLE TABLE CARDINALITY MISESTIMATE 1484026771529551585 SH CUSTOMERS CUST_STATE_ COLUMN DYNAMIC_SAMPLING MISSING_STATS SINGLE TABLE CARDINALITY PROVINCE MISESTIMATE 1484026771529551585 SH CUSTOMERS TABLE DYNAMIC_SAMPLING MISSING_STATS SINGLE TABLE CARDINALITY MISESTIMATE

  Read the article

• Drawing using Dynamic Array and Buffer Object

  - by user1905910

  I have a problem when creating the vertex array and the indices array. I don't know what really is the problem with the code, but I guess is something with the type of the arrays, can someone please give me a light on this? #define GL_GLEXT_PROTOTYPES #include<GL/glut.h> #include<iostream> using namespace std; #define BUFFER_OFFSET(offset) ((GLfloat*) NULL + offset) const GLuint numDiv = 2; const GLuint numVerts = 9; GLuint VAO; void display(void) { enum vertex {VERTICES, INDICES, NUM_BUFFERS}; GLuint * buffers = new GLuint[NUM_BUFFERS]; GLfloat (*squareVerts)[2] = new GLfloat[numVerts][2]; GLubyte * indices = new GLubyte[numDiv*numDiv*4]; GLuint delta = 80/numDiv; for(GLuint i = 0; i < numVerts; i++) { squareVerts[i][1] = (i/(numDiv+1))*delta; squareVerts[i][0] = (i%(numDiv+1))*delta; } for(GLuint i=0; i < numDiv; i++){ for(GLuint j=0; j < numDiv; j++){ //cada iteracao gera 4 pontos #define NUM_VERT(ii,jj) ((ii)*(numDiv+1)+(jj)) #define INDICE(ii,jj) (4*((ii)*numDiv+(jj))) indices[INDICE(i,j)] = NUM_VERT(i,j); indices[INDICE(i,j)+1] = NUM_VERT(i,j+1); indices[INDICE(i,j)+2] = NUM_VERT(i+1,j+1); indices[INDICE(i,j)+3] = NUM_VERT(i+1,j); } } glGenVertexArrays(1, &VAO); glBindVertexArray(VAO); glGenBuffers(NUM_BUFFERS, buffers); glBindBuffer(GL_ARRAY_BUFFER, buffers[VERTICES]); glBufferData(GL_ARRAY_BUFFER, sizeof(squareVerts), squareVerts, GL_STATIC_DRAW); glVertexPointer(2, GL_FLOAT, 0, BUFFER_OFFSET(0)); glEnableClientState(GL_VERTEX_ARRAY); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, buffers[INDICES]); glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(indices), indices, GL_STATIC_DRAW); glClear(GL_COLOR_BUFFER_BIT); glColor3f(1.0,1.0,1.0); glDrawElements(GL_POINTS, 16, GL_UNSIGNED_BYTE, BUFFER_OFFSET(0)); glutSwapBuffers(); } void init() { glClearColor(0.0, 0.0, 0.0, 0.0); gluOrtho2D((GLdouble) -1.0, (GLdouble) 90.0, (GLdouble) -1.0, (GLdouble) 90.0); } int main(int argv, char** argc) { glutInit(&argv, argc); glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE); glutInitWindowSize(500,500); glutInitWindowPosition(100,100); glutCreateWindow("myCode.cpp"); init(); glutDisplayFunc(display); glutMainLoop(); return 0; } Edit: The problem here is that drawing don't work at all. But I don't get any error, this just don't display what I want to display. Even if I put the code that make the vertices and put them in the buffers in a diferent function, this don't work. I just tried to do this: void display(void) { glBindVertexArray(VAO); glClear(GL_COLOR_BUFFER_BIT); glColor3f(1.0,1.0,1.0); glDrawElements(GL_POINTS, 16, GL_UNSIGNED_BYTE, BUFFER_OFFSET(0)); glutSwapBuffers(); } and I placed the rest of the code in display in another function that is called on the start of the program. But the problem still

  Read the article

• Confused Why I am getting C1010 error?

  - by bluepixel

  I have three files: Main, slist.h and slist.cpp can be seen at http://forums.devarticles.com/c-c-help-52/confused-why-i-am-getting-c2143-and-c1010-error-259574.html I'm trying to make a program where main reads the list of student names from a file (roster.txt) and inserts all the names in a list in ascending order. This is the full class roster list (notCheckedIN). From here I will read all students who have come to write the exams, each checkin will transfer their name to another list (in ascending order) called present. The final product is notCheckedIN will contain a list of all those students that did not write the exam and present will contain the list of all students who wrote the exam Main File: // Exam.cpp : Defines the entry point for the console application. #include "stdafx.h" #include "iostream" #include "iomanip" #include "fstream" #include "string" #include "slist.h" using namespace std; void OpenFile(ifstream&); void GetClassRoster(SortList&, ifstream&); void InputStuName(SortList&, SortList&); void UpdateList(SortList&, SortList&, string); void Print(SortList&, SortList&); const string END_DATA = "EndData"; int main() { ifstream roster; SortList notCheckedIn; //students present SortList present; //student absent OpenFile(roster); if(!roster) //Make sure file is opened return 1; GetClassRoster(notCheckedIn, roster); //insert the roster list into the notCheckedIn list InputStuName(present, notCheckedIn); Print(present, notCheckedIn); return 0; } void OpenFile(ifstream& roster) //Precondition: roster is pointing to file containing student anmes //Postcondition:IF file does not exist -> exit { string fileName = "roster.txt"; roster.open(fileName.c_str()); if(!roster) cout << "***ERROR CANNOT OPEN FILE :"<< fileName << "***" << endl; } void GetClassRoster(SortList& notCheckedIN, ifstream& roster) //Precondition:roster points to file containing list of student last name // && notCheckedIN is empty //Postcondition:notCheckedIN is filled with the names taken from roster.txt in ascending order { string name; roster >> name; while(roster) { notCheckedIN.Insert(name); roster >> name; } } void InputStuName(SortList& present, SortList& notCheckedIN) //Precondition: present list is empty initially and notCheckedIN list is full //Postcondition: repeated prompting to enter stuName // && notCheckedIN will delete all names found in present // && present will contain names present // && names not found in notCheckedIN will report Error { string stuName; cout << "Enter last name (Enter EndData if none to Enter): "; cin >> stuName; while(stuName!=END_DATA) { UpdateList(present, notCheckedIN, stuName); } } void UpdateList(SortList& present, SortList& notCheckedIN, string stuName) //Precondition:stuName is assigned //Postcondition:IF stuName is present, stuName is inserted in present list // && stuName is removed from the notCheckedIN list // ELSE stuName does not exist { if(notCheckedIN.isPresent(stuName)) { present.Insert(stuName); notCheckedIN.Delete(stuName); } else cout << "NAME IS NOT PRESENT" << endl; } void Print(SortList& present, SortList& notCheckedIN) //Precondition: present and notCheckedIN contains a list of student Names present/not present //Postcondition: content of present and notCheckedIN is printed { cout << "Candidates Present" << endl; present.Print(); cout << "Candidates Absent" << endl; notCheckedIN.Print(); } Header File: //Specification File: slist.h //This file gives the specifications of a list abstract data type //List items inserted will be in order //Class SortList, structured type used to represent an ADT using namespace std; const int MAX_LENGTH = 200; typedef string ItemType; //Class Object (class instance) SortList. Variable of class type. class SortList { //Class Member - components of a class, can be either data or functions public: //Constructor //Post-condition: Empty list is created SortList(); //Const member function. Compiler error occurs if any statement within tries to modify a private data bool isEmpty() const; //Post-condition: == true if list is empty // == false if list is not empty bool isFull() const; //Post-condition: == true if list is full // == false if list is full int Length() const; //Post-condition: size of list void Insert(ItemType item); //Precondition: NOT isFull() && item is assigned //Postcondition: item is in list && Length() = Length()@entry + 1 void Delete(ItemType item); //Precondition: NOT isEmpty() && item is assigned //Postcondition: // IF items is in list at entry // first occurance of item in list is removed // && Length() = Length()@entry -1; // ELSE // list is not changed bool isPresent(ItemType item) const; //Precondition: item is assigned //Postcondition: == true if item is present in list // == false if item is not present in list void Print() const; //Postcondition: All component of list have been output private: int length; ItemType data[MAX_LENGTH]; void BinSearch(ItemType, bool&, int&) const; }; Source File: //Implementation File: slist.cpp //This file gives the specifications of a list abstract data type //List items inserted will be in order //Class SortList, structured type used to represent an ADT #include "iostream" #include "slist.h" using namespace std; // int length; // ItemType data[MAX_SIZE]; //Class Object (class instance) SortList. Variable of class type. SortList::SortList() //Constructor //Post-condition: Empty list is created { length=0; } //Const member function. Compiler error occurs if any statement within tries to modify a private data bool SortList::isEmpty() const //Post-condition: == true if list is empty // == false if list is not empty { return(length==0); } bool SortList::isFull() const //Post-condition: == true if list is full // == false if list is full { return (length==(MAX_LENGTH-1)); } int SortList::Length() const //Post-condition: size of list { return length; } void SortList::Insert(ItemType item) //Precondition: NOT isFull() && item is assigned //Postcondition: item is in list && Length() = Length()@entry + 1 // && list componenet are in ascending order of value { int index; index = length -1; while(index >=0 && item<data[index]) { data[index+1]=data[index]; index--; } data[index+1]=item; length++; } void SortList:elete(ItemType item) //Precondition: NOT isEmpty() && item is assigned //Postcondition: // IF items is in list at entry // first occurance of item in list is removed // && Length() = Length()@entry -1; // && list components are in ascending order // ELSE data array is unchanged { bool found; int position; BinSearch(item,found,position); if (found) { for(int index = position; index < length; index++) data[index]=data[index+1]; length--; } } bool SortList::isPresent(ItemType item) const //Precondition: item is assigned && length <= MAX_LENGTH && items are in ascending order //Postcondition: true if item is found in the list // false if item is not found in the list { bool found; int position; BinSearch(item,found,position); return (found); } void SortList::Print() const //Postcondition: All component of list have been output { for(int x= 0; x<length; x++) cout << data[x] << endl; } void SortList::BinSearch(ItemType item, bool found, int position) const //Precondition: item contains item to be found // && item in the list is an ascending order //Postcondition: IF item is in list, position is returned // ELSE item does not exist in the list { int first = 0; int last = length -1; int middle; found = false; while(!found) { middle = (first+last)/2; if(data[middle]<item) first = middle+1; else if (data[middle] > item) last = middle -1; else found = true; } if(found) position = middle; } I cannot get rid of the C1010 error: fatal error C1010: unexpected end of file while looking for precompiled header. Did you forget to add '#include "stdafx.h"' to your source? Is there a way to get rid of this error? When I included "stdafx.h" I received the following 32 errors (which does not make sense to me why because I referred back to my manual on how to use Class method - everything looks a.ok.) Error 1 error C2871: 'std' : a namespace with this name does not exist c:\..\slist.h 6 Error 2 error C2146: syntax error : missing ';' before identifier 'ItemType' c:\..\slist.h 8 Error 3 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int c:\..\slist.h 8 Error 4 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int c:\..\slist.h 8 Error 5 error C2061: syntax error : identifier 'ItemType' c:\..\slist.h 30 Error 6 error C2061: syntax error : identifier 'ItemType' c:\..\slist.h 34 Error 7 error C2061: syntax error : identifier 'ItemType' c:\..\slist.h 43 Error 8 error C2146: syntax error : missing ';' before identifier 'data' c:\..\slist.h 52 Error 9 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int c:\..\slist.h 52 Error 10 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int c:\..\slist.h 52 Error 11 error C2061: syntax error : identifier 'ItemType' c:\..\slist.h 53 Error 12 error C2146: syntax error : missing ')' before identifier 'item' c:\..\slist.cpp 41 Error 13 error C2761: 'void SortList::Insert(void)' : member function redeclaration not allowed c:\..\slist.cpp 41 Error 14 error C2059: syntax error : ')' c:\..\slist.cpp 41 Error 15 error C2143: syntax error : missing ';' before '{' c:\..\slist.cpp 45 Error 16 error C2447: '{' : missing function header (old-style formal list?) c:\..\slist.cpp 45 Error 17 error C2146: syntax error : missing ')' before identifier 'item' c:\..\slist.cpp 57 Error 18 error C2761: 'void SortList:elete(void)' : member function redeclaration not allowed c:\..\slist.cpp 57 Error 19 error C2059: syntax error : ')' c:\..\slist.cpp 57 Error 20 error C2143: syntax error : missing ';' before '{' c:\..\slist.cpp 65 Error 21 error C2447: '{' : missing function header (old-style formal list?) c:\..\slist.cpp 65 Error 22 error C2146: syntax error : missing ')' before identifier 'item' c:\..\slist.cpp 79 Error 23 error C2761: 'bool SortList::isPresent(void) const' : member function redeclaration not allowed c:\..\slist.cpp 79 Error 24 error C2059: syntax error : ')' c:\..\slist.cpp 79 Error 25 error C2143: syntax error : missing ';' before '{' c:\..\slist.cpp 83 Error 26 error C2447: '{' : missing function header (old-style formal list?) c:\..\slist.cpp 83 Error 27 error C2065: 'data' : undeclared identifier c:\..\slist.cpp 95 Error 28 error C2146: syntax error : missing ')' before identifier 'item' c:\..\slist.cpp 98 Error 29 error C2761: 'void SortList::BinSearch(void) const' : member function redeclaration not allowed c:\..\slist.cpp 98 Error 30 error C2059: syntax error : ')' c:\..\slist.cpp 98 Error 31 error C2143: syntax error : missing ';' before '{' c:\..\slist.cpp 103 Error 32 error C2447: '{' : missing function header (old-style formal list?) c:\..\slist.cpp 103

  Read the article

• JsTree v1.0 - How to manipulate effectively the data from the backend to render the trees and operate correctly?

  - by Jean Paul

  Backend info: PHP 5 / MySQL URL: http://github.com/downloads/vakata/jstree/jstree_pre1.0_fix_1.zip Table structure for table discussions_tree -- CREATE TABLE IF NOT EXISTS `discussions_tree` ( `id` int(11) NOT NULL AUTO_INCREMENT, `parent_id` int(11) NOT NULL DEFAULT '0', `user_id` int(11) NOT NULL DEFAULT '0', `label` varchar(16) DEFAULT NULL, `position` bigint(20) unsigned NOT NULL DEFAULT '0', `left` bigint(20) unsigned NOT NULL DEFAULT '0', `right` bigint(20) unsigned NOT NULL DEFAULT '0', `level` bigint(20) unsigned NOT NULL DEFAULT '0', `type` varchar(255) CHARACTER SET utf8 COLLATE utf8_unicode_ci DEFAULT NULL, `h_label` varchar(16) NOT NULL DEFAULT '', `fulllabel` varchar(255) DEFAULT NULL, UNIQUE KEY `uidx_3` (`id`), KEY `idx_1` (`user_id`), KEY `idx_2` (`parent_id`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; /*The first element should in my understanding not even be shown*/ INSERT INTO `discussions_tree` (`id`, `parent_id`, `user_id`, `label`, `position`, `left`, `right`, `level`, `type`, `h_label`, `fulllabel`) VALUES (0, 0, 0, 'Contacts', 0, 1, 1, 0, NULL, '', NULL); INSERT INTO `discussions_tree` (`id`, `parent_id`, `user_id`, `label`, `position`, `left`, `right`, `level`, `type`, `h_label`, `fulllabel`) VALUES (1, 0, 0, 'How to Tag', 1, 2, 2, 0, 'drive', '', NULL); Front End : I've simplified the logic, it has 6 trees actually inside of a panel and that works fine $array = array("Discussions"); $id_arr = array("d"); $nid = 0; foreach ($array as $k=> $value) { $nid++; ?> <li id="<?=$value?>" class="label"> <a href='#<?=$value?>'><span> <?=$value?> </span></a> <div class="sub-menu" style="height:auto; min-height:120px; background-color:#E5E5E5" > <div class="menu" id="menu_<?=$id_arr[$k]?>" style="position:relative; margin-left:56%"> <img src="./js/jsTree/create.png" alt="" id="create" title="Create" > <img src="./js/jsTree/rename.png" alt="" id="rename" title="Rename" > <img src="./js/jsTree/remove.png" alt="" id="remove" title="Delete"> <img src="./js/jsTree/cut.png" alt="" id="cut" title="Cut" > <img src="./js/jsTree/copy.png" alt="" id="copy" title="Copy"> <img src="./js/jsTree/paste.png" alt="" id="paste" title="Paste"> </div> <div id="<?=$id_arr[$k]?>" class="jstree_container"></div> </div> </li> <!-- JavaScript neccessary for this tree : <?=$value?> --> <script type="text/javascript" > jQuery(function ($) { $("#<?=$id_arr[$k]?>").jstree({ // List of active plugins used "plugins" : [ "themes", "json_data", "ui", "crrm" , "hotkeys" , "types" , "dnd", "contextmenu"], // "ui" :{ "initially_select" : ["#node_"+ $nid ] } , "crrm": { "move": { "always_copy": "multitree" }, "input_width_limit":128 }, "core":{ "strings":{ "new_node" : "New Tag" }}, "themes": {"theme": "classic"}, "json_data" : { "ajax" : { "url" : "./js/jsTree/server-<?=$id_arr[$k]?>.php", "data" : function (n) { // the result is fed to the AJAX request `data` option return { "operation" : "get_children", "id" : n.attr ? n.attr("id").replace("node_","") : 1, "state" : "", "user_id": <?=$uid?> }; } } } , "types" : { "max_depth" : -1, "max_children" : -1, "types" : { // The default type "default" : { "hover_node":true, "valid_children" : [ "default" ], }, // The `drive` nodes "drive" : { // can have files and folders inside, but NOT other `drive` nodes "valid_children" : [ "default", "folder" ], "hover_node":true, "icon" : { "image" : "./js/jsTree/root.png" }, // those prevent the functions with the same name to be used on `drive` nodes.. internally the `before` event is used "start_drag" : false, "move_node" : false, "remove_node" : false } } }, "contextmenu" : { "items" : customMenu , "select_node": true} }) //Hover function binded to jstree .bind("hover_node.jstree", function (e, data) { $('ul li[rel="drive"], ul li[rel="default"], ul li[rel=""]').each(function(i) { $(this).find("a").attr('href', $(this).attr("id")+".php" ); }) }) //Create function binded to jstree .bind("create.jstree", function (e, data) { $.post( "./js/jsTree/server-<?=$id_arr[$k]?>.php", { "operation" : "create_node", "id" : data.rslt.parent.attr("id").replace("node_",""), "position" : data.rslt.position, "label" : data.rslt.name, "href" : data.rslt.obj.attr("href"), "type" : data.rslt.obj.attr("rel"), "user_id": <?=$uid?> }, function (r) { if(r.status) { $(data.rslt.obj).attr("id", "node_" + r.id); } else { $.jstree.rollback(data.rlbk); } } ); }) //Remove operation .bind("remove.jstree", function (e, data) { data.rslt.obj.each(function () { $.ajax({ async : false, type: 'POST', url: "./js/jsTree/server-<?=$id_arr[$k]?>.php", data : { "operation" : "remove_node", "id" : this.id.replace("node_",""), "user_id": <?=$uid?> }, success : function (r) { if(!r.status) { data.inst.refresh(); } } }); }); }) //Rename operation .bind("rename.jstree", function (e, data) { data.rslt.obj.each(function () { $.ajax({ async : true, type: 'POST', url: "./js/jsTree/server-<?=$id_arr[$k]?>.php", data : { "operation" : "rename_node", "id" : this.id.replace("node_",""), "label" : data.rslt.new_name, "user_id": <?=$uid?> }, success : function (r) { if(!r.status) { data.inst.refresh(); } } }); }); }) //Move operation .bind("move_node.jstree", function (e, data) { data.rslt.o.each(function (i) { $.ajax({ async : false, type: 'POST', url: "./js/jsTree/server-<?=$id_arr[$k]?>.php", data : { "operation" : "move_node", "id" : $(this).attr("id").replace("node_",""), "ref" : data.rslt.cr === -1 ? 1 : data.rslt.np.attr("id").replace("node_",""), "position" : data.rslt.cp + i, "label" : data.rslt.name, "copy" : data.rslt.cy ? 1 : 0, "user_id": <?=$uid?> }, success : function (r) { if(!r.status) { $.jstree.rollback(data.rlbk); } else { $(data.rslt.oc).attr("id", "node_" + r.id); if(data.rslt.cy && $(data.rslt.oc).children("UL").length) { data.inst.refresh(data.inst._get_parent(data.rslt.oc)); } } } }); }); }); // This is for the context menu to bind with operations on the right clicked node function customMenu(node) { // The default set of all items var control; var items = { createItem: { label: "Create", action: function (node) { return {createItem: this.create(node) }; } }, renameItem: { label: "Rename", action: function (node) { return {renameItem: this.rename(node) }; } }, deleteItem: { label: "Delete", action: function (node) { return {deleteItem: this.remove(node) }; }, "separator_after": true }, copyItem: { label: "Copy", action: function (node) { $(node).addClass("copy"); return {copyItem: this.copy(node) }; } }, cutItem: { label: "Cut", action: function (node) { $(node).addClass("cut"); return {cutItem: this.cut(node) }; } }, pasteItem: { label: "Paste", action: function (node) { $(node).addClass("paste"); return {pasteItem: this.paste(node) }; } } }; // We go over all the selected items as the context menu only takes action on the one that is right clicked $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element) { if ( $(element).attr("id") != $(node).attr("id") ) { // Let's deselect all nodes that are unrelated to the context menu -- selected but are not the one right clicked $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); } }); //if any previous click has the class for copy or cut $("#<?=$id_arr[$k]?>").find("li").each(function(index,element) { if ($(element) != $(node) ) { if( $(element).hasClass("copy") || $(element).hasClass("cut") ) control=1; } else if( $(node).hasClass("cut") || $(node).hasClass("copy")) { control=0; } }); //only remove the class for cut or copy if the current operation is to paste if($(node).hasClass("paste") ) { control=0; // Let's loop through all elements and try to find if the paste operation was done already $("#<?=$id_arr[$k]?>").find("li").each(function(index,element) { if( $(element).hasClass("copy") ) $(this).removeClass("copy"); if ( $(element).hasClass("cut") ) $(this).removeClass("cut"); if ( $(element).hasClass("paste") ) $(this).removeClass("paste"); }); } switch (control) { //Remove the paste item from the context menu case 0: switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; delete items.pasteItem; break; case "default": delete items.pasteItem; break; } break; //Remove the paste item from the context menu only on the node that has either copy or cut added class case 1: if( $(node).hasClass("cut") || $(node).hasClass("copy") ) { switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; delete items.pasteItem; break; case "default": delete items.pasteItem; break; } } else //Re-enable it on the clicked node that does not have the cut or copy class { switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; break; } } break; //initial state don't show the paste option on any node default: switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; delete items.pasteItem; break; case "default": delete items.pasteItem; break; } break; } return items; } $("#menu_<?=$id_arr[$k]?> img").hover( function () { $(this).css({'cursor':'pointer','outline':'1px double teal'}) }, function () { $(this).css({'cursor':'none','outline':'1px groove transparent'}) } ); $("#menu_<?=$id_arr[$k]?> img").click(function () { switch(this.id) { //Create only the first element case "create": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("create", '#'+$(element).attr("id"), null, /*{attr : {href: '#' }}*/null ,null, false); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //REMOVE case "remove": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ //only execute if the current node is not the first one (drive) if( $(element).attr("id") != $("div.jstree > ul > li").first().attr("id") ) { $("#<?=$id_arr[$k]?>").jstree("remove",'#'+$(element).attr("id")); } else $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //RENAME NODE only one selection case "rename": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ if( $(element).attr("id") != $("div.jstree > ul > li").first().attr("id") ) { switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("rename", '#'+$(element).attr("id") ); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } } else $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //Cut case "cut": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("cut", '#'+$(element).attr("id")); $.facebox('<p class=\'p_inner teal\'>Operation "Cut" successfully done.<p class=\'p_inner teal bold\'>Where to place it?'); setTimeout(function(){ $.facebox.close(); $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id")); }, 2000); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //Copy case "copy": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("copy", '#'+$(element).attr("id")); $.facebox('<p class=\'p_inner teal\'>Operation "Copy": Successfully done.<p class=\'p_inner teal bold\'>Where to place it?'); setTimeout(function(){ $.facebox.close(); $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); }, 2000); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; case "paste": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("paste", '#'+$(element).attr("id")); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; } }); <? } ?> server.php $path='../../../..'; require_once "$path/phpfoo/dbif.class"; require_once "$path/global.inc"; // Database config & class $db_config = array( "servername"=> $dbHost, "username" => $dbUser, "password" => $dbPW, "database" => $dbName ); if(extension_loaded("mysqli")) require_once("_inc/class._database_i.php"); else require_once("_inc/class._database.php"); //Tree class require_once("_inc/class.ctree.php"); $dbLink = new dbif(); $dbErr = $dbLink->connect($dbName,$dbUser,$dbPW,$dbHost); $jstree = new json_tree(); if(isset($_GET["reconstruct"])) { $jstree->_reconstruct(); die(); } if(isset($_GET["analyze"])) { echo $jstree->_analyze(); die(); } $table = '`discussions_tree`'; if($_REQUEST["operation"] && strpos($_REQUEST["operation"], "_") !== 0 && method_exists($jstree, $_REQUEST["operation"])) { foreach($_REQUEST as $k => $v) { switch($k) { case 'user_id': //We are passing the user_id from the $_SESSION on each request and trying to pick up the min and max value from the table that matches the 'user_id' $sql = "SELECT max(`right`) , min(`left`) FROM $table WHERE `user_id`=$v"; //If the select does not return any value then just let it be :P if (!list($right, $left)=$dbLink->getRow($sql)) { $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v WHERE `id` = 1 AND `parent_id` = 0"); $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v WHERE `parent_id` = 1 AND `label`='How to Tag' "); } else { $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v, `right`=$right+2 WHERE `id` = 1 AND `parent_id` = 0"); $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v, `left`=$left+1, `right`=$right+1 WHERE `parent_id` = 1 AND `label`='How to Tag' "); } break; } } header("HTTP/1.0 200 OK"); header('Content-type: application/json; charset=utf-8'); header("Cache-Control: no-cache, must-revalidate"); header("Expires: Mon, 26 Jul 1997 05:00:00 GMT"); header("Pragma: no-cache"); echo $jstree->{$_REQUEST["operation"]}($_REQUEST); die(); } header("HTTP/1.0 404 Not Found"); ?> The problem: DND *(Drag and Drop) works, Delete works, Create works, Rename works, but Copy, Cut and Paste don't work

  Read the article

• Search option: jqGrid + PHP

  - by Felix Guerrero

  Hi, I'm trying to get work this code: $("#list").jqGrid({ url: 'docente.php', datatype: 'json', mtype: 'POST', postData: {c : "", n: "", a: "", d: "", t: "", e: "", f: "", g: $('#selectD').value(), p: "", call: "report"}, colNames: ['C&eacute;dula','Nombres', 'Apellidos', 'Direcci&oacute;n', 'E-mail','Tel&eacute;fono', 'Profesi&oacute;n'], colModel: [ { name:'rows.cedula', index: 'cedula', search:true, jsonmap: 'cedula', width: 150, align: 'left', sortable:true}, { name:'rows.nombre', index: 'nombre', jsonmap: 'nombre', width: 150, align: 'left'}, { name:'rows.apellido', index: 'apellido', jsonmap: 'apellido', width: 240, align: 'left'}, { name:'rows.direccion', index: 'direccion', jsonmap: 'direccion', width: 330, align: 'left'}, { name:'rows.email', index: 'email', jsonmap: 'email',width: 200, align: 'left'}, { name:'rows.telefono', index: 'telefono', jsonmap: 'telefono', width: 170, align: 'left'}, { name:'rows.descripcion_profesion', index: 'descripcion_profesion', jsonmap: 'descripcion_profesion',width: 120, align: 'left'}], pager: '#pager', rowNum: 8, autowidth: true, rowList: [10, 20], sortname: 'cedula', sortorder: 'asc', viewrecords: true, caption: 'Docentes', jsonReader : { root: "rows", repeatitems: false }, height: 350, width: 900 }); $("#list").jqGrid('navGrid','#pager',{search:true, searchtext: "buscar",edit:false,add:false,del:false}); The HMTL I'm using: <div id="reporte"> <table id="list"></table> <div id="pager"> </div> <div> And the PHP code: $total_pages = 0; $limit=10; $count = Profesor::CountAll(); if($count> 0) $total_pages= ceil($count/$limit); else $total_pages=0; $cnx = new PDO("mysql:host=localhost;dbname=appsms","root",""); $rows = array(); $strQuery="select cedula, nombre, apellido, direccion, telefono, email, descripcion_profesion from Profesor join Profesion on " . " (profesor.profesion_id = profesion.id) and (profesor.grado_id_grado = '" .$this->grado . "') order by cedula;"; $stmt = $cnx->prepare($strQuery); $stmt->execute(array("reporte")); $rows = $stmt->fetchAll(PDO::FETCH_ASSOC); $response->page = 1; $response->total= $total_pages; $response->records = sizeof($rows); $i=0; foreach($rows as $result){ $response->rows[$i] = $result; $i++; } echo json_encode($response); The JSON I get: {"page":1,"total":1,"records":2, "rows":[{"cedula":"v-108984103","nombre":"Soneia","apellido":"Rond\u00f3n Contreras","direccion":"El Rosal, calle 2-44","telefono":"04544247008457","email":"[email protected]","descripcion_profesion":"Docente"}, {"cedula":"v-135254741","nombre":"Judith","apellido":"Rangel M\u00e1rquez","direccion":"Sabaneta","telefono":"04247644152499","email":"","descripcion_profesion":"Docente"}]} It loads the query from PHP but the search option doesn't work neither the sorting function on "cedula"'s column. What I need to do?. Thanks in advance.

  Read the article

• How to Solve N-Queens Problem in Scheme?

  - by Philip

  Hi, I'm stuck on the extended exercise 28.2 of How to Design Programs. Here is the link to the question: http://www.htdp.org/2003-09-26/Book/curriculum-Z-H-35.html#node_chap_28 I used a vector of true or false values to represent the board instead of using a list. This is what I've got which doesn't work: #lang Scheme (define-struct posn (i j)) ;takes in a position in i, j form and a board and returns a natural number that represents the position in index form ;example for board xxx ; xxx ; xxx ;(0, 1) - 1 ;(2, 1) - 7 (define (board-ref a-posn a-board) (+ (* (sqrt (vector-length a-board)) (posn-i a-posn)) (posn-j a-posn))) ;reverse of the above function ;1 - (0, 1) ;7 - (2, 1) (define (get-posn n a-board) (local ((define board-length (sqrt (vector-length a-board)))) (make-posn (floor (/ n board-length)) (remainder n board-length)))) ;determines if posn1 threatens posn2 ;true if they are on the same row/column/diagonal (define (threatened? posn1 posn2) (cond ((= (posn-i posn1) (posn-i posn2)) #t) ((= (posn-j posn1) (posn-j posn2)) #t) ((= (abs (- (posn-i posn1) (posn-i posn2))) (abs (- (posn-j posn1) (posn-j posn2)))) #t) (else #f))) ;returns a list of positions that are not threatened or occupied by queens ;basically any position with the value true (define (get-available-posn a-board) (local ((define (get-ava index) (cond ((= index (vector-length a-board)) '()) ((vector-ref a-board index) (cons index (get-ava (add1 index)))) (else (get-ava (add1 index)))))) (get-ava 0))) ;consume a position in the form of a natural number and a board ;returns a board after placing a queen on the position of the board (define (place n a-board) (local ((define (foo x) (cond ((not (board-ref (get-posn x a-board) a-board)) #f) ((threatened? (get-posn x a-board) (get-posn n a-board)) #f) (else #t)))) (build-vector (vector-length a-board) foo))) ;consume a list of positions in the form of natural number and consumes a board ;returns a list of boards after placing queens on each of the positions on the board (define (place/list alop a-board) (cond ((empty? alop) '()) (else (cons (place (first alop) a-board) (place/list (rest alop) a-board))))) ;returns a possible board after placing n queens on a-board ;returns false if impossible (define (placement n a-board) (cond ((zero? n) a-board) (else (local ((define available-posn (get-available-posn a-board))) (cond ((empty? available-posn) #f) (else (or (placement (sub1 n) (place (first available-posn) a-board)) (placement/list (sub1 n) (place/list (rest available-posn) a-board))))))))) ;returns a possible board after placing n queens on a list of boards ;returns false if all the boards are not valid (define (placement/list n boards) (cond ((empty? boards) #f) ((zero? n) (first boards)) ((not (boolean? (placement n (first boards)))) (first boards)) (else (placement/list n (rest boards)))))

  Read the article

• Java - Highest, Lowest and Average

  - by Emily

  Hello, I've just started studying and I need help on one of my exercises. I need the end user to input a rain fall number for each month. I then need to out put the average rainfall, highest month and lowest month and the months which rainfall was above average. I keep getting the same number in the highest and lowest and I have no idea why. I am seriously pulling my hair out. Any help would be greatly appreciated. This is what I have so far: public class rainfall { /** * @param args */ public static void main(String[] args) { int[] numgroup; numgroup = new int [13]; ConsoleReader console = new ConsoleReader(); int highest; int lowest; int index; int tempVal; int minMonth; int minIndex; int maxMonth; int maxIndex; System.out.println("Welcome to Rainfall"); for(index = 1; index < 13; index = index + 1) { System.out.println("Please enter the rainfall for month " + index); tempVal = console.readInt(); while (tempVal>100 || tempVal<0) { System.out.println("The rating must be within 0...100. Try again"); tempVal = console.readInt(); } numgroup[index] = tempVal; } lowest = numgroup[0]; for(minIndex = 0; minIndex < numgroup.length; minIndex = minIndex + 1); { if (numgroup[0] < lowest) { lowest = numgroup[0]; minMonth = minIndex; } } highest = numgroup[1]; for(maxIndex = 0; maxIndex < numgroup.length; maxIndex = maxIndex + 1); { if (numgroup[1] > highest) { highest = numgroup[1]; maxMonth = maxIndex; } } System.out.println("The average monthly rainfall was "); System.out.println("The lowest monthly rainfall was month " + minIndex); System.out.println("The highest monthly rainfall was month " + maxIndex); System.out.println("Thank you for using Rainfall"); } private static ConsoleReader ConsoleReader() { return null; } } Thanks, Emily

  Read the article

• What is the best algorithm for this problem?

  - by mark

  What is the most efficient algorithm to solve the following problem? Given 6 arrays, D1,D2,D3,D4,D5 and D6 each containing 6 numbers like: D1[0] = number D2[0] = number ...... D6[0] = number D1[1] = another number D2[1] = another number .... ..... .... ...... .... D1[5] = yet another number .... ...... .... Given a second array ST1, containing 1 number: ST1[0] = 6 Given a third array ans, containing 6 numbers: ans[0] = 3, ans[1] = 4, ans[2] = 5, ......ans[5] = 8 Using as index for the arrays D1,D2,D3,D4,D5 and D6, the number that goes from 0, to the number stored in ST1[0] minus one, in this example 6, so from 0 to 6-1, compare each res array against each D array My algorithm so far is: I tried to keep everything unlooped as much as possible. EML := ST1[0] //number contained in ST1[0] EML1 := 0 //start index for the arrays D While EML1 < EML if D1[ELM1] = ans[0] goto two if D2[ELM1] = ans[0] goto two if D3[ELM1] = ans[0] goto two if D4[ELM1] = ans[0] goto two if D5[ELM1] = ans[0] goto two if D6[ELM1] = ans[0] goto two ELM1 = ELM1 + 1 return 0 //bad row of numbers, if while ends two: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[1] goto two if D2[ELM1] = ans[1] goto two if D3[ELM1] = ans[1] goto two if D4[ELM1] = ans[1] goto two if D5[ELM1] = ans[1] goto two if D6[ELM1] = ans[1] goto two ELM1 = ELM1 + 1 return 0 three: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[2] goto two if D2[ELM1] = ans[2] goto two if D3[ELM1] = ans[2] goto two if D4[ELM1] = ans[2] goto two if D5[ELM1] = ans[2] goto two if D6[ELM1] = ans[2] goto two ELM1 = ELM1 + 1 return 0 four: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[3] goto two if D2[ELM1] = ans[3] goto two if D3[ELM1] = ans[3] goto two if D4[ELM1] = ans[3] goto two if D5[ELM1] = ans[3] goto two if D6[ELM1] = ans[3] goto two ELM1 = ELM1 + 1 return 0 five: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[4] goto two if D2[ELM1] = ans[4] goto two if D3[ELM1] = ans[4] goto two if D4[ELM1] = ans[4] goto two if D5[ELM1] = ans[4] goto two if D6[ELM1] = ans[4] goto two ELM1 = ELM1 + 1 return 0 six: EML1 := 0 start index for arrays Ds While EML1 < EML if D1[ELM1] = ans[0] return 1 //good row of numbers if D2[ELM1] = ans[0] return 1 if D3[ELM1] = ans[0] return 1 if D4[ELM1] = ans[0] return 1 if D5[ELM1] = ans[0] return 1 if D6[ELM1] = ans[0] return 1 ELM1 = ELM1 + 1 return 0 As language of choice, it would be pure c

  Read the article

• IEnumerable<T> ToArray usage, is it a copy or a pointer?

  - by Daniel

  I am parsing an arbitrary length byte array that is going to be passed around to a few different layers of parsing. Each parser creates a Header and a Packet payload just like any ordinary encapsulation. And my problem lies in how the encapsulation holds its packet byte array payload. Say i have a 100 byte array, and it has 3 levels of encapsulation. 3 packet objects will be created and i want to set the payload of these packets to the corresponding position in the byte array of the packet. For example lets say the payload size is 20 for all levels, then imagine it has a public byte[] Payload on each object. However the problem is that this byte[] Payload is a copy of the original 100 bytes. So i'm going to end up with 160 bytes in memory instead of 100. If it were in c++ i could just easily use a pointer however i'm writing this in c#. So i created the following class: public class PayloadSegment<T> : IEnumerable<T> { public readonly T[] Array; public readonly int Offset; public readonly int Count; public PayloadSegment(T[] array, int offset, int count) { this.Array = array; this.Offset = offset; this.Count = count; } public T this[int index] { get { if (index < 0 || index >= this.Count) throw new IndexOutOfRangeException(); else return Array[Offset + index]; } set { if (index < 0 || index >= this.Count) throw new IndexOutOfRangeException(); else Array[Offset + index] = value; } } public IEnumerator<T> GetEnumerator() { for (int i = Offset; i < Offset + Count; i++) yield return Array[i]; } System.Collections.IEnumerator System.Collections.IEnumerable.GetEnumerator() { IEnumerator<T> enumerator = this.GetEnumerator(); while (enumerator.MoveNext()) { yield return enumerator.Current; } } } This way i can simply reference a position inside the original byte array but use positional indexing. However if i do something like: PayloadSegment<byte> something = new PayloadSegment<byte>(someArray, 5, 10); byte[] somethingArray = something.ToArray(); Will the somethingArray be a copy of the bytes, or a reference to the original PayloadSegment which in turn is a reference to the original byte array? Sorry it was hard to word this lol _<

  Read the article

• Dynamic Array Java program converted to C#

  - by Sef

  Hello, The folowing program was orignally in java. But i still get 1 error with the program in C#. (the eror is listed in comment in the 2nd block of code). using System; using System.Collections.Generic; using System.Linq; using System.Text; using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace DynArray { public class DynArrayTester { static void Main(string[] args) { DynArray da = new DynArray(5); for (int i = 1; i <= 7; i++) { da.setData(i, i); //da.put(0, 0); //da.put(6, 6); } Console.WriteLine(da); } }/*DynArrayTester*/ } using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace DynArray { public class DynArray { //toestand private int[] data; //gedrag public DynArray(int size) { data = new int[size]; } public int getData(int index) { return data[index - 1]; } private void expand(int size) { int[] tmp = data; data = new int[size]; for (int i = 0; i < tmp.Length; i++) { data[i] = tmp[i]; } }/*expand*/ public void setData(int index, int data) { if (0 < index) { if (index > this.data.length) // ***error, does not contain definition for "lenght" and no exetension method "lenght"*** expand(index); this.data[index - 1] = data; } } public override string ToString() { StringBuilder buf = new StringBuilder(); for (int i = 0; i < data.Length; i++) { buf.Append("[" + i + "]"); buf.Append(data[i]); buf.Append('\n'); } return buf.ToString(); } }/*DynArray*/ }

  Read the article

• Problem with Precision floating point operation in C

  - by Microkernel

  Hi Guys, For one of my course project I started implementing "Naive Bayesian classifier" in C. My project is to implement a document classifier application (especially Spam) using huge training data. Now I have problem implementing the algorithm because of the limitations in the C's datatype. ( Algorithm I am using is given here, http://en.wikipedia.org/wiki/Bayesian_spam_filtering ) PROBLEM STATEMENT: The algorithm involves taking each word in a document and calculating probability of it being spam word. If p1, p2 p3 .... pn are probabilities of word-1, 2, 3 ... n. The probability of doc being spam or not is calculated using Here, probability value can be very easily around 0.01. So even if I use datatype "double" my calculation will go for a toss. To confirm this I wrote a sample code given below. #define PROBABILITY_OF_UNLIKELY_SPAM_WORD (0.01) #define PROBABILITY_OF_MOSTLY_SPAM_WORD (0.99) int main() { int index; long double numerator = 1.0; long double denom1 = 1.0, denom2 = 1.0; long double doc_spam_prob; /* Simulating FEW unlikely spam words */ for(index = 0; index < 162; index++) { numerator = numerator*(long double)PROBABILITY_OF_UNLIKELY_SPAM_WORD; denom2 = denom2*(long double)PROBABILITY_OF_UNLIKELY_SPAM_WORD; denom1 = denom1*(long double)(1 - PROBABILITY_OF_UNLIKELY_SPAM_WORD); } /* Simulating lot of mostly definite spam words */ for (index = 0; index < 1000; index++) { numerator = numerator*(long double)PROBABILITY_OF_MOSTLY_SPAM_WORD; denom2 = denom2*(long double)PROBABILITY_OF_MOSTLY_SPAM_WORD; denom1 = denom1*(long double)(1- PROBABILITY_OF_MOSTLY_SPAM_WORD); } doc_spam_prob= (numerator/(denom1+denom2)); return 0; } I tried Float, double and even long double datatypes but still same problem. Hence, say in a 100K words document I am analyzing, if just 162 words are having 1% spam probability and remaining 99838 are conspicuously spam words, then still my app will say it as Not Spam doc because of Precision error (as numerator easily goes to ZERO)!!!. This is the first time I am hitting such issue. So how exactly should this problem be tackled?

  Read the article

• C++ Exam Question

  - by Carlucho

  I just took an exam where i was asked the following: Write the function body of each of the methods GenStrLen, InsertChar and StrReverse for the given code bellow. You must take into consideration the following; How strings are constructed in C++ The string must not overflow Insertion of character increases its length by 1 An empty string is indicated by StrLen = 0 class Strings { private: char str[80]; int StrLen; public: // Constructor Strings() { StrLen=0; }; // A function for returning the length of the string 'str' int GetStrLen(void) { }; // A function to inser a character 'ch' at the end of the string 'str' void InsertChar(char ch) { }; // A function to reverse the content of the string 'str' void StrReverse(void) { }; }; The answer I gave was something like this (see bellow). My one of problem is that used many extra variables and that makes me believe am not doing it the best possible way, and the other thing is that is not working.... class Strings { private: char str[80]; int StrLen; int index; // *** Had to add this *** public: Strings(){ StrLen=0; } int GetStrLen(void){ for (int i=0 ; str[i]!='\0' ; i++) index++; return index; // *** Here am getting a weird value, something like 1829584505306 *** } void InsertChar(char ch){ str[index] = ch; // *** Not sure if this is correct cuz I was not given int index *** } void StrRevrse(void){ GetStrLen(); char revStr[index+1]; for (int i=0 ; str[i]!='\0' ; i++){ for (int r=index ; r>0 ; r--) revStr[r] = str[i]; } } }; I would appreciate if anyone could explain me toughly what is the best way to have answered the question and why. Also how come my professor closes each class function like " }; " i thought that was only used for ending classes and constructors only. Thanks a lot for your help.

  Read the article

• Preoblem with Precision floating point operation in C

  - by Microkernel

  Hi Guys, For one of my course project I started implementing "Naive Bayesian classifier" in C. My project is to implement a document classifier application (especially Spam) using huge training data. Now I have problem implementing the algorithm because of the limitations in the C's datatype. ( Algorithm I am using is given here, http://en.wikipedia.org/wiki/Bayesian_spam_filtering ) PROBLEM STATEMENT: The algorithm involves taking each word in a document and calculating probability of it being spam word. If p1, p2 p3 .... pn are probabilities of word-1, 2, 3 ... n. The probability of doc being spam or not is calculated using Here, probability value can be very easily around 0.01. So even if I use datatype "double" my calculation will go for a toss. To confirm this I wrote a sample code given below. #define PROBABILITY_OF_UNLIKELY_SPAM_WORD (0.01) #define PROBABILITY_OF_MOSTLY_SPAM_WORD (0.99) int main() { int index; long double numerator = 1.0; long double denom1 = 1.0, denom2 = 1.0; long double doc_spam_prob; /* Simulating FEW unlikely spam words */ for(index = 0; index < 162; index++) { numerator = numerator*(long double)PROBABILITY_OF_UNLIKELY_SPAM_WORD; denom2 = denom2*(long double)PROBABILITY_OF_UNLIKELY_SPAM_WORD; denom1 = denom1*(long double)(1 - PROBABILITY_OF_UNLIKELY_SPAM_WORD); } /* Simulating lot of mostly definite spam words */ for (index = 0; index < 1000; index++) { numerator = numerator*(long double)PROBABILITY_OF_MOSTLY_SPAM_WORD; denom2 = denom2*(long double)PROBABILITY_OF_MOSTLY_SPAM_WORD; denom1 = denom1*(long double)(1- PROBABILITY_OF_MOSTLY_SPAM_WORD); } doc_spam_prob= (numerator/(denom1+denom2)); return 0; } I tried Float, double and even long double datatypes but still same problem. Hence, say in a 100K words document I am analyzing, if just 162 words are having 1% spam probability and remaining 99838 are conspicuously spam words, then still my app will say it as Not Spam doc because of Precision error (as numerator easily goes to ZERO)!!!. This is the first time I am hitting such issue. So how exactly should this problem be tackled?

  Read the article

• C++ exam question on string class implementation

  - by Carlucho

  I just took an exam where i was asked the following: Write the function body of each of the methods GenStrLen, InsertChar and StrReverse for the given code bellow. You must take into consideration the following; How strings are constructed in C++ The string must not overflow Insertion of character increases its length by 1 An empty string is indicated by StrLen = 0 class Strings { private: char str[80]; int StrLen; public: // Constructor Strings() { StrLen=0; }; // A function for returning the length of the string 'str' int GetStrLen(void) { }; // A function to inser a character 'ch' at the end of the string 'str' void InsertChar(char ch) { }; // A function to reverse the content of the string 'str' void StrReverse(void) { }; }; The answer I gave was something like this (see bellow). My one of problem is that used many extra variables and that makes me believe am not doing it the best possible way, and the other thing is that is not working.... class Strings { private: char str[80]; int StrLen; int index; // *** Had to add this *** public: Strings(){ StrLen=0; } int GetStrLen(void){ for (int i=0 ; str[i]!='\0' ; i++) index++; return index; // *** Here am getting a weird value, something like 1829584505306 *** } void InsertChar(char ch){ str[index] = ch; // *** Not sure if this is correct cuz I was not given int index *** } void StrRevrse(void){ GetStrLen(); char revStr[index+1]; for (int i=0 ; str[i]!='\0' ; i++){ for (int r=index ; r>0 ; r--) revStr[r] = str[i]; } } }; I would appreciate if anyone could explain me toughly what is the best way to have answered the question and why. Also how come my professor closes each class function like " }; " i thought that was only used for ending classes and constructors only. Thanks a lot for your help.

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >