Search Results

Search found 56958 results on 2279 pages for 'system configuration'.

Page 96/2279 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• Issues with configuration of Apache and mod_auth_sspi

  - by TekiusFanatikus

  I've been able to get this working using XAMP with Apache 2.0.55 and XAMP Apache 2.2.14 without any problems. However, when I attempt to configure our intranet server (Apache 2.0.59), I don't get the same results. The results are that the following variables contain the information desired: $_SERVER["REMOTE_USER"] AND $_SERVER["PHP_AUTH_USER"]. In this case, they are blank. I'm expecting "domain/user_name". Conf file stuff: <Directory "/xxx/xampp/htdocs/"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # #Options Indexes FollowSymLinks Includes ExecCGI Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # #AllowOverride All AllowOverride None # # Controls who can get stuff from this server. # #Order allow,deny #Allow from all Order allow,deny Allow from all #NT Domain Login AuthName "Intranet" AuthType SSPI SSPIAuth On SSPIAuthoritative On SSPIDomain "xxxx" SSPIOfferBasic Off SSPIPerRequestAuth On SSPIOmitDomain Off # keep domain name in userid string SSPIUsernameCase lower Require valid-user </Directory> I would like to note that I've modified the paths to reflect the intranet environment. I'm using the following module: http://sourceforge.net/projects/mod-auth-sspi/ Once the module is installed and the conf file is modified, the intranet environment's server scope isn't populated with the expected variables. Edit #1 <Directory "/path_here"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # #Options Indexes FollowSymLinks Includes ExecCGI Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # #AllowOverride All AllowOverride None # # Controls who can get stuff from this server. # #Order allow,deny #Allow from all Order allow,deny Allow from all #NT Domain Login AuthName "Intranet" AuthType SSPI SSPIAuth On SSPIAuthoritative On SSPIDomain "domain_here" SSPIOfferBasic On SSPIPerRequestAuth On SSPIOmitDomain Off # keep domain name in userid string SSPIUsernameCase lower Require valid-user </Directory>

  Read the article

• rsnapshot intervals in configuration file...

  - by Patrick

  A simple question about rsnapshot. In order to perform daily backups I'm going to add lines to cron in my Ubuntu. Then, why do I have also these lines in the rsnapshot.conf ? ######################################### # BACKUP INTERVALS # # Must be unique and in ascending order # # i.e. hourly, daily, weekly, etc. # ######################################### interval hourly 6 interval daily 7 interval weekly 4 #interval monthly 3 If I use cron, should I disable them ? thanks ps. I've just realized that in the crontab I still have "hourly" and "daily". Should I then uncomment only the one I use in the crontab ? And what's the point to specify hourly if it is already specified in cron ? I'm a bit confused. # crontab -e 0 */4 * * * /usr/local/bin/rsnapshot hourly 30 23 * * * /usr/local/bin/rsnapshot daily

  Read the article

• Subversion LDAP Configuration

  - by dbyrne

  I am configuring a subversion repository to use basic LDAP authentication. I have an entry in my http.conf file that looks like this: <Location /company/some/location> DAV svn SVNPath /repository/some/location AuthType Basic AuthName LDAP AuthBasicProvider ldap Require valid-user AuthLDAPBindDN "cn=SubversionAdmin,ou=admins,o=company.com" AuthLDAPBindPassword "XXXXXXX" AuthLDAPURL "ldap://company.com/ou=people,o=company.com?personid" </Location> This works fine for living, breathing people who need to log in. However, I also need to provide application accounts access to the repository. These accounts are in a different OU. Do I need to add a whole new <location> element, or can I add a second AuthLDAPURLto the existing entry?

  Read the article

• Plesk and Apache configuration gives me 403 on all sites

  - by Michael Stark

  My friends server running Plesk 9.2 with Apache. Now there were some problems the last days where he couldn't tell me what exactly has happened. The situation now is the following: He has a lot of domains in it. When somebody visit any domain it shows up a 403. I checked the logs and saw the problem [Sun Jun 24 08:24:47 2012] [error] [client XX.XX.XX.XX] script '/srv/www/htdocs/index.php' not found or unable to stat Apache should route to '/srv/www/vhosts/domain.tld/htdocs/index.php' instead of /srv/www/htdocs/index.php It's doing that on all of the domains. Can you tell me whats wrong and how to fix it?

  Read the article

• Apache SSL Configuration

  - by Hoe Chin

  I tried to configured the SSL using keytool and i have successfully import the root ca cert but when i try to import my ssl cert i encountered this error Unsupported Encoding?Can anyone guide me how to solve this problem

  Read the article

• VPN access configuration with ForeFront TMG

  - by Yang

  I am trying to configure VPN Client access with ForeFront TMG. When I try to add domain groups to allow access to them, under Group column I can only see the SID of the domain group. And the Domain column ends up empty. ForeFront TMG is joined to the domain. Can you think of a reason?

  Read the article

• script Disk Management configuration

  - by Joseph

  I have 10 workstations with large monitors that have USB slots and several card readers built in. The card readers cannot be disabled and will map to drive letters when I image the computers. I go into Disk Management and delete the drive mappings and add mappings to a single folder in C:\ with a folder for each slot. I have to do this because of scripts that run that are expecting specific letter drive mappings to network resources. Is there a way to script the deleting and adding of drive mappings instead of having to use the Disk Management GUI manually on each workstation? The workstations are running XP Professional.

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• Secure Apache PHP vhost configuration

  - by jsimmons

  I'm looking to secure some websites running under apache using suexec. At the moment php is executed with the user/group of the file being executed. This seems to me, not secure enough. It stops vhosts interfering with each other, but does not stop malicious code writing anywhere in the vhost being used. I was thinking that a possibility would be to run scripts as nobody/vhost group, that way the vhost user could still have full access to the vhost directories, but executing php would only be able to write to files with g+w, and to execute files with g+x. This I think should stop arbitrary writing in the web dir from compromised php. Just wondering if this is crazy, ridiculous, stupid? Of course this would be done on top of existing security measures.

  Read the article

• CISCO Router configuration

  - by Acharf

  Hey, I'm looking for a course of CISCO Commandes to configure a router. Is there anyone that can help ?

  Read the article

• IIS 7 and ASP.NET State Service Configuration

  - by Shawn

  We have 2 web servers load balanced and we wanted to get away from sticky sessions for obvious reasons. Our attempted approach is to use the ASP.NET State service on one of the boxes to store the session state for both. I realize that it's best to have a server dedicated to storing sessions but we don't have the resources for that. I've followed these instructions to no avail. The session still isn't being shared between the two servers. I'm not receiving any errors. I have the same machine key for both servers, and I've set the application ID to a unique value that matches between the two servers. Any suggestions on how I can troubleshoot this issue? Update: I turned on the session state service on my local machine and pointed both servers to the ip address on my local machine and it worked as expected. The session was shared between both servers. This leads me to believe that the problem might be that I'm not using a standalone server as my state service. Perhaps the problem is because I am using the ip address 127.0.0.1 on one server and then using a different ip address on the other server. Unfortunately when I try to use the network ip address as opposed to localhost the connection doesn't seem to work from the host server. Any insight on whether my suspicions are correct would be appreciated.

  Read the article

• Xmodmap configuration

  - by Krishna S

  On my Debian Linux machine Ctrl+Alt+F1 is bound to a virtual terminal. I can see the corresponding entry by running xmodmap -pke keycode 67 = F1 XF86_Switch_VT_1 F1 XF86_Switch_VT_1 Per this thread, which I might add is consistent with what I've read elsewhere, the columns on the right hand side of = correspond to key, Shift+key, AltGr+key and Shift+AltGr+key. Given that, I don't understand how the keycode mapping for F1 (above) works for Ctrl+Alt+F1. It seems it should really be either Shift+F1 or Shift+AltGr+F1? Here's the output of xmodmap -pm on my machine: shift Shift_L (0x32), Shift_R (0x3e) lock Caps_Lock (0x25) control Control_L (0x42), Control_R (0x69) mod1 Alt_L (0x40), Alt_R (0x6c), Meta_L (0xcd) mod2 Num_Lock (0x4d) mod3 mod4 Super_L (0x85), Super_R (0x86), Super_L (0xce), Hyper_L (0xcf) mod5 ISO_Level3_Shift (0x5c), Mode_switch (0xcb) Can anybody explain it?

  Read the article

• why this routing configuration does not work?

  - by avs099

  I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

  Read the article

• Need Varnish configuration advise

  - by Patrick

  Hello fellows, I need some advise here for default.vcl. Here's the rules: 1) Only cache pages with urls that contains '/c/', the rest will pass 2) Set the cache expiry to 3 hours 3) Only cache and server from cache if cookie 'abc' and cookie 'xyz' is empty Thank you!

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• Superscope DHCP leases and configuration set up

  - by Vdub

  Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

  Read the article

• Airport Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• Set default system audio output port (for all accounts)

  - by Ludwik Trammer

  The default output audio port Ubuntu doesn't work on my system. It should be "Analog Mono Output/Amplifier", instead of "Analog Output/Amplifier". I can easily change that in sound preferences, just by choosing the right port in the "Output" tab. The problem is this would only apply to a single account, and I would like to change it system-wide, so it applies to all accounts on the system (I have more than 100 users...). I'm after 2 hours of Googling, so any help would be appreciated.

  Read the article

• Configuration of Server root email - Change Address and Name on outgoing email

  - by JTWOOD

  As a newbie Postfix user, I've gotten so far and now I am stuck with a SMALL problem. I would like to configure my local network servers to send alerts and like using the following: 1) From address: [email protected] 2) From name: Hostname I can get #1 to work fine using smtp_generic_maps The problem is that on my email client, the name is listed as "root" - as in the header shows the following: Date: Sun, 29 Jul 2012 13:21:01 -0400 (EDT) From: [email protected] (root) To: undisclosed-recipients:; I'd like to change it to "From: [email protected] (Zeus)" I imagine that this can be done in the headers_check, but so far I haven't gotten anything to work and before I waste a ton of time trying to get this to work, I'd like to make sure I am on the right track. My aliasing and genericmaps are set up correctly (As far as I can see and know - the results are correct!). I just want to change that last bit in the From field to reflect the hostname. I would also like to add something in the subject of the outgoing messages for easy filtering - something like Subject: [Zeus.domain] - "Original Subject" Any suggestions are much appreciated. Thanks!

  Read the article

• NFS-shared file-system is locking up

  - by fredden

  Our NFS-shared file-system is locking up. Please feel free to ask any questions you feel relevant. :) At the time, there are a lot of processes in "disk sleep" state, and the load averages on our machines sky-rocket. The machines are responsive on SSH, but our the majority of our websites (apache+mod_php) just hang, as does our email system (exim+dovecot). Any websites which don't require write access to the file-system continue to operate. The load averages continue to rise until some kind of time-out is reached, but for at least 10-15 minutes. I've seen load averages over 800, yet the machines are still responsive for actions which don't require writing to the shared file-system. I've been investigating a variety of options, which have all turned out to be red-herrings: nagios, proftpd, bind, cron tasks. I'm seeing these messages in the file server's system log: Jul 30 09:37:17 fs0 kernel: [1810036.560046] statd: server localhost not responding, timed out Jul 30 09:37:17 fs0 kernel: [1810036.560053] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:37:17 fs0 kernel: [1810036.560064] lockd: cannot monitor node2 Jul 30 09:38:22 fs0 kernel: [1810101.384027] statd: server localhost not responding, timed out Jul 30 09:38:22 fs0 kernel: [1810101.384033] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:38:22 fs0 kernel: [1810101.384044] lockd: cannot monitor node0 Software involved: VMWare, Debian lenny (64bit), ancient Red Hat (32 bit) (version 7 I believe), Debian etch (32bit) NFS, apache2+mod_php, exim, dovecot, bind, amanda, proftpd, nagios, cacti, drbd, heartbeat, keepalived, LVS, cron, ssmtp, NIS, svn, puppet, memcache, mysql, postgres Joomla!, Magento, Typo3, Midgard, Symfony, custom php apps

  Read the article

• IBM BladeCenter S: Disk Configuration

  - by gravyface

  Have just the one storage bay right now (SAS 15K 600GB x 6) and have configured one storage pool in RAID 10 with 4 disks (and two global spares). For each blade, I've created a volume and mapped accordingly: Blade #1 400 GB Blade #2 200 GB Blade #3 100 GB Blade #4 100 GB When I boot up Blade 1 and enter into the UEFI Setup (F1) followed by the Adapters and UEFI Drivers LSI Logic Fusion MPT SAS Driver Utility, I see 4 disks: two are the on-board 73GB drives, the other two are 200GB each and assume I'm being presented with two logical disks from the volume I created and mapped to this blade. I was a bit surprised by this: I figured I would've been presented with one logical drive per volume, not two. I'm assuming I can just configure whatever RAID level I wish that supports two disks, but not really sure what the benefits/trade-offs here. Should I go with RAID 10 on top of RAID 10? RAID 0? Software RAID 0/1/10? Does it even matter? If this is "normal" to see two disks, then I'm going to likely just do some benchmarking and see if it makes a difference changing the RAID levels (my guess is no); if this is not normal, well, please let me know. :)

  Read the article

• Apache Configuration Issue - website without www going to default site

  - by Brian

  I have included a copy of my virtual host file for apache below. (However I have hidden the ip address and domain name for now) My problem is that the following work: www.mydomainnamehere.org www.mydomainnamehere.com mydomainnamehere.com This one doesn't work: mydomainnamehere.org - instead of going to the document root listed below, it goes to the document root of the default site. What could be causing this? <VirtualHost [ipaddresshidden]:80> ServerAdmin [email protected] ServerName mydomainnamehere.org ServerAlias www.mydomainnamehere.org ServerAlias mydomainnamehere.com ServerAlias www.mydomainnamehere.com DocumentRoot /home/www/mydomainnamehere.org/html/ ErrorLog /home/www/mydomainnamehere.org/logs/error.log CustomLog /home/www/mydomainnamehere.org/logs/access.log combined </VirtualHost>

  Read the article

• Dead drive in LVM/XFS configuration

  - by Freddie Witherden

  I had three drives in LVM: a 2 TB drive and two 1 TB drives (added later). One of the 1 TB drives -- I believe the third one -- has died. Spanning all three drives was an XFS partition. Reading: http://www.novell.com/coolsolutions/appnote/19386.html I see that one way of handling this is to replace the dead drive and copy the metadata over. However, I am currently not in possession of a 1 TB drive and can not readily acquire one. Given this, what are my options? There was nothing important on the drives (if there was I would have them in RAID 1) but I would not mind attempting a recovery. Is there a simple way of forcing LVM to go with just two drives and NUL out anything else? (So that fsck can do its thing.)

  Read the article

• System Center 2012 Service Manager change request status stuck at new

  - by Chuck Herrington

  The guy that built and setup this system left rather abruptly and I've taken over. My current issues are I have several change requests that are stuck at New. They do not move to Pending or In Progress. The system is not sending emails when incidents are getting assigned to people. This used to work on this system. I have done a lot of searching and the usual solution to this of stopping and restarting the system center services does not help. Can anyone give me any ideas of where else to look? Update: From all the searching I have done it seemed like I was at the point of re-installing. My initial installation of SCSM 2012 was on a machine that was upgraded from SCSM 2010 and also hosted SCCM 2007 and WSUS. We decided to give it a fresh start on a new server by installing a second instance of the SCSM server on a brand new 2008 R2 server then promoting the new server to the workflow master using the procedures outlined in this article - Dealing with Multiple management Servers. I've gotten to the point where we have both the old and the new server up and the new server has been promoted. I had hopped to get spammed by emails all the sudden due to the workflow taking off, but no such luck. Once all the clients are reconfigured to point to the new server we still plan to decommission the old server but at this point it seems to be that the problem is in the database. Short of any other input from the community, my next plan is to install a 180 day trial on a test server, complete with a separate database so that I can do a side by side comparison between a completely fresh install and what I have now and see if I can find any differences. While that install is running I also plan on investigating the event logs to see if there is anything in there that can shed some light on what is happening on the new server. Update 2: So I've now got a test SCSM server up with a completely fresh install including Database and it seems to be able to transition Change Requests from New to In Progress. I'm attempting to find differences between the two. Stay Tuned! Update 3: In looking through the event log on the new SCSM machine i discovered: Log Name: Operations Manager Source: OpsMgr Root Connector Date: 10/9/2013 3:48:18 PM Event ID: 28000 Task Category: None Level: Warning Keywords: Classic User: N/A Computer: scsm02 Description: The Root connector received an exception from the SDK Service while submitting task status: Cannot set availability on a health service that doesn't exist. This lead me to Event ID 2800 logged after installing secondary server for System Center 2012 Service Manager SP1. I contacted MS to obtain the hotfix, BIG warning here, turns out the hotfix is not so "hot". In order to apply this hotfix, you have to uninstall then reinstall using the files they supply. :( This is where I am at now ... Update 4: Not much luck after the re-install. The errors in the event log have gone away on the new server but the workflows still aren't running and neither the event log nor the workflow status screen seem to indicate why. I've done a comparison of the Activity and the Change Request Event Workflows and I've removed everything from the production system that is not in my fresh test system (which is everything), shut down the services, cleared out the cache folders and restarted the services and still no joy. At the moment the only thing I can think to do is either a)nuke the entire system including the database and start over, losing all of our data in the process or b)contact MS (which is probably going to cost us a butt load of money and time in the end to only advise us to do the same thing. Maybe more idea's will come after coffee ... No answers came after coffee. Attempting to contact MS. Managed to get to their first line of defense, gave them our SA number and someone is supposed to call me back. I am trying to log into my incident on their site to update my ticket with the link to this thread but when i click on the link in the email they sent me it goes to a "Sorry, the page you requested is not available" page ... Linux is looking better and better all the time.

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >