Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 97/1036 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Which GPU with my CPU for 1080p flash?

  - by oshirowanen

  Based on the following site: http://www.adobe.com/products/flashplayer/systemreqs/ I need the following minimum spec to play 1080p flash video via a browser: CPU: 1.8GHz Intel Core Duo, AMD Athlon 64 X2 4200+, or faster processor RAM: 512MB of RAM GPU: 64MB of graphics memory I only have a 2.8GHz Pentium 4 process which is no where near as good as the processor listed above. I don't want to upgrade my processor as I think it will mean I have to change the motherboard etc. So, my question is, what is the cheapest PCI-E GPU I can buy which will allow me to play smooth 1080p flash video via a browser. I think the cheapest I can get is the 8400GS, but am not sure if that will be able to handle 1080p with the processor I have. I have looked at the GT520 and was wondering if this is the cheapest GPU which I need, or if there is something cheaper which will do 1080p with a 2.8GHz Pentium 4. Or, will I have to get something better than a GT520?

  Read the article

• Slow boot on Ubuntu 12.04

  - by Hailwood

  My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

  Read the article

• How to share two keyboard on the same laptop, french iso layout and usa ansi layout keyboard with usb?

  - by reyman64

  I recently buy a "noppoo choc mini" with this specific ANSI US-INTERNATIONAL pc84 layout. This specific keyboard have only 84 key , a 60% (compact tenkeyless) reduced layout My problem is simple, there is no keyboard layout into Ubuntu 12.04 which correspond to this usa normal ansi layout ... so it's the same problem with reduced version and only 84 key .. I search a template of normal ANSI US-INTERNATIONAL for xmodmap/xkb, and after i can try to manually map the other key. I search on google, and i don't find any other user which have same problem, so it's seem i have not the good keywoard to search this information.. Edit 1 : Here you can see there is probably a bug in ubuntu, because the layout for USA with dead key is not correct ! I have this : http://minus.com/lEdKMrsNAwkVA And other users have this for the same layout : http://i.stack.imgur.com/p52XG.png EDIT 2 It seems after a "sudo dpkg-reconfigure keyboard-configuration" : french standard keyboard pc105 + precision M65 keyboard from dell laptop Now i can see the good us layout in parameters, but i cannot have the iso layout for french usage... EDIT 3 Ok, after reboot i understand the probleme, i explain. I have one laptop with integrated french keyboard, and i want to use my usb keyboard which use a usa ANSI layout. It seem it's impossible in ubuntu and "dpkg-reconfigure keyboard-configuration" to share two different physical layout (ANSI and EU ISO) on the same computer ... EDIT4 Ok, it seems i can switch the physical layout (ISO <- ANSI) with this command in terminal : setxkbmap -layout us setxkbmap -layout us -variant alt-intl an setxkbmap -layout fr It's very complicated qnd it seem ubuntu 12.04 have big problem with keyboard manager ... because all works great with these two commands, without ANY change into the system parameters keyboard !!! Second bug ? The image of the layout for fr is buggy, the layout is not ISO, but i can press on the letter "< " at the left of right shift without any problem ! You can see the image here (french alternative with ANSI layout ? it's crazy ?) : http: //minus.com/lXsDJwoeyWAfF Can you help me on this point ? I'm lost with xkb, and manual mapping is very complicated ... Thanks a lot, SR

  Read the article

• Mouse Cursor Freezes Randomly on Ubuntu 10.10

  - by Harry

  Hi, I'm using Ubuntu 10.10 its installed using Wubi, dual boot with Windows. It's fresh install. Randomly mouse cursor freezes and cant click anything on the screen. I can move mouse but cant click. "It causes when select a text something" So I'm using keyboard to to reboot system. Then it back to normal after reboot. Tried with unplugging-plugging mouse don't work. PC: Asus laptop with Intel GMA 950 graphic card. A4 tech optical mouse. Ubuntu 10.10 completely updated and upgraded. How can I get around this? Thanks.

  Read the article

• BASIC on Ubuntu

  - by Tim Lytle

  Was asked by a new Ubuntu user - who also wants to learn about programming - what he could use to run BASIC code. He was working through a BASIC book before trying out Ubuntu, and he'd like to continue without having to switch back to Windows. It looks like there are a few BASIC packages in the standard repositories, as well as projects like Mono which may include some kind of BASIC support. What would be a good recommendation from the standard repositories - or from a deb package - for someone learning the basics of BASIC and new to Ubuntu?

  Read the article

• VirtualHost and 403 Forbidden problem with Apache

  - by Joaquín L. Robles

  Hi people, I have the exactly same problem as in 403 Forbidden Error when accessing enabled virtual host, but I tried the provided solution and still receiving 403 Forbidden, my site is called project, and it's cofiguration file in /etc/apache2/sites-available is the following: <VirtualHost *:80> ServerAdmin webmaster@reweb ServerName www.online.project.com ErrorLog /logs/project-errors.log DocumentRoot /home/joarobles/Zend/workspaces/DefaultWorkspace7/online.project.com.ar/public <Directory /home/joarobles/Zend/workspaces/DefaultWorkspace7/online.project.com.ar> Order Deny,Allow Allow from all Options Indexes </Directory> Tried to change the owner of /home/joarobles/Zend/workspaces/DefaultWorkspace7/online.cobico.com.ar to www:data:www-data with recursion, but still getting this error in project-errors.log: [Mon Jan 31 01:26:01 2011] [crit] [client 127.0.0.1] (13)Permission denied: /home/joarobles/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Any idea? Thanks!

  Read the article

• File added to project doesn't get added to packages

  - by lorin

  I'm creating customized binary versions of OpenStack nova packages (lp:nova) using their packaging scripts (lp:~openstack-ubuntu-packagers/ubuntu/natty/nova/ubuntu). I create binaries by doing: dpkg-buildpackage -b -rfakeroot -tc -uc -D This creates a set of packages (python-nova, nova-common, nova-compute, ...). In our customized version of the code (lp:~usc-isi/nova/hpc-trunk), we recently merged in some changes from another branch, and there's now a new file in our repository that wasn't in upstream: nova/virt/cpuinfo.xml.template. This file isn't getting added to any of the packages, where it should be added to python-nova. Why wouldn't dpkg-buildpackage be including this file? A more basic question: how does dpkg-buildpackage determine which files go in which packages? Is it related at all to the debian/watch file? This contains some URLs that are pointing to the upstream project. version=3 http://launchpad.net/nova/+download http://launchpad.net/nova/.*/nova-(.*)\.tar\.gz http://nova.openstack.org/tarballs/ nova-(.*).tar.gz

  Read the article

• Keep Xubuntu Network Manager from overwriting resolv.conf

  - by leeand00

  How do I keep Xubuntu 11.10 from overwriting resolv.conf everytime I reboot my machine? Everytime I reboot, I get an overwritten resolv.conf that has the words # Generated by Network Manager and no nameservers specified. I ran the following to get rid of Network Manager, but it's still replacing my resolv.conf when I restart the machine. sudo apt-get --purge remove network-manager sudo apt-get --purge remove network-manager-gnome sudo apt-get --purge remove network-manager-pptp sudo apt-get --purge remove network-manager-pptp-gnome

  Read the article

• Not able to add PC and synchronise files with Ubuntu One

  - by Ryan Hawthorne

  I have tried to add my PC to my Ubuntu One account 3 or 4 times: while I log in successfully in the Ubuntu One interface (after deleting my Ubuntu One password in 'passwords'), my folders don't give me an option to synchronise. I don't get the pink bar saying 'these folders cannot be synchronised'; I get nothing at all, no option. The second time I tried it seemed to work – but then it stopped working again.

  Read the article

• How does one find out which application is associated with an indicator icon?

  - by Amos Annoy

  It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. some pertinent references (src: answer to What is the difference between indicators and a system tray?: Here is the documentation for indicators: Application indicators | Ubuntu App Developer libindicate Reference Manual libappindicator Reference Manual also DesktopExperienceTeam/ApplicationIndicators - Ubuntu Wiki ref: How can the application that makes an indicator icon be identified? bookmark: How does one find out which application is associated with an indicator icon in Ubuntu 12.04? is a serious question for reasons & problems outlined below and for which a significant investment has been made and is necessary for remedial purposes. reviewing refs. to find an orchestrated resolution ... (an indicator ap. indicator maybe needed) This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? How are the sub-indicator applications identified? These are the aps associated with the components of an indicators drop-down menu. (This was to be a separate question and quite naturally follows up the progression. It is included here as it is obvious there is no provisioning to track down offending either sub or indicator aps. easily.) (The examination of SM points out a rather poignant factor in the faster battery depletion and shortened run time - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously, in 10.04, it was well under 10%, between 5% and 7%! - the huge inordinate cpu overhead originates from Xorg and compiz - after booting the system, only SM is run and All Processes are selected, sorting on %CPU - switching between Resources and Processes profiles the execution overhead problem - running another ap like gedit "Text Editor" briefly gives it CPU priority - going back to S&M several aps. are at the top of the list in order: gnome-system-monitor as expected, then: Xorg, compiz, unity-panel-service, hud-service, with dbus-daemon and kworker/x:y's mixed in with some expected daemons and background tasks like nm-applet - not only do Xorg and compiz require excessive CPU time but their entourage has to come along too! further exacerbating the problem - our compute bound tasks no longer work effectively in the field - reduced battery life, reduced CPU time for custom ap.s etc. - and all this precipitated from an examination of what is going on with the battery ap. indicator - this was and is not a flippant, rhetorical or idle musing but has consequences for the credible deployment of 12.04 to reduce the negative impact of its overhead in a production environment) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.: NM vs. iwlist/iwconfig conflict, BT ap. vs RF switch, Battery ap. w/ no suspend/sleep for poor battery runtime, ... the list goes on) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery ap. identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators A reference in the comments was given to: What is the difference between indicators and a system tray? quoting from that source ... Unfortunately desktop indicators are not well documented yet: I couldn't find any specification doc ... Well ... the actual document https://wiki.ubuntu.com/DesktopExperienceTeam/ApplicationIndicators#Summary does not help much but it's existential information provides considerable insight ...

  Read the article

• Error while installing netbeans

  - by Hridesh

  I tried to install NetBeans 7.2 from a downloaded .sh file, but experienced problems. Here's text from the Terminal, which shows what I did and what happened: hridesh@ubuntu:~$ cd Desktop/ hridesh@ubuntu:~/Desktop$ cd full\ netbeans\ 7.2\ for\ linux\ in\ .sh\ format/ hridesh@ubuntu:~/Desktop/full netbeans 7.2 for linux in .sh format$ chmod +x netbeans-7.1.2-ml-linux.sh hridesh@ubuntu:~/Desktop/full netbeans 7.2 for linux in .sh format$ ./netbeans-7.1.2-ml-linux.sh Configuring the installer... Searching for JVM on the system... Extracting installation data... Installer file /home/hridesh/Desktop/full seems to be corrupted Why does the message Installer file /home/hridesh/Desktop/full seems to be corrupted appear? Is this file actually corrupted or something else going wrong?

  Read the article

• Do dconf use EXI binary XML?

  - by Hibou57

  A question came to my mind reading an answer to the question What are the differences between gconf and dconf?. In an reply to the above question, Oli said: Binary read access is far faster than parsing XML. However, there exist a W3C recommendation for binary XML, since 2010: Efficient XML Interchange (EXI) Format 1.0. Is this what dconf uses? If Yes, where is it confirmed? If No, was there some investigations toward it at some time, and what was the conclusions? Thanks for any tracks, I'm curious to know.

  Read the article

• How to stream H264 Video from camera over FTP?

  - by Jay

  I bought a h264 security camera system last year and set it up to ftp video to my computer. I was able to get the video to play (even though it played a little fast) on Ubuntu 11.04 using mplayer. A few months ago, I did a fresh install of 12.04 and I cannot seem to get the video to play with mplayer, smplayer or VLC. I have the restricted formats video packages installed and when playing with any of the players, all I get is a gray video. When calling mplayer from the command line to play the video with no options, I get a lot of these errors: [h264 @ 0x7f278c61f280]concealing 1320 DC, 1320 AC, 1320 MV errors No pts value from demuxer to use for frame! pts after filters MISSING I'm not a video expert and have been coming up with a lot of dead ends when Googling for this. Could someone offer some advice about how to play these videos? Here is the output of mediainfo for a sample file. mediainfo -f sec-cam01-m-20120921-212454.h264 General Count : 278 Count of stream of this kind : 1 Kind of stream : General Kind of stream : General Stream identifier : 0 Count of video streams : 1 Video_Format_List : AVC Video_Format_WithHint_List : AVC Codecs Video : AVC Complete name : sec-cam01-m-20120921-212454.h264 File name : sec-cam01-m-20120921-212454 File extension : h264 Format : AVC Format : AVC Format/Info : Advanced Video Codec Format/Url : http://developers.videolan.org/x264.html Format/Extensions usually used : avc h264 Commercial name : AVC Internet media type : video/H264 Codec : AVC Codec : AVC Codec/Info : Advanced Video Codec Codec/Url : http://developers.videolan.org/x264.html Codec/Extensions usually used : avc h264 File size : 1097315 File size : 1.05 MiB File size : 1 MiB File size : 1.0 MiB File size : 1.05 MiB File size : 1.046 MiB File last modification date : UTC 2012-09-22 01:27:12 File last modification date (local) : 2012-09-21 21:27:12 Video Count : 205 Count of stream of this kind : 1 Kind of stream : Video Kind of stream : Video Stream identifier : 0 Format : AVC Format/Info : Advanced Video Codec Format/Url : http://developers.videolan.org/x264.html Commercial name : AVC Format profile : [email protected] Format settings : 1 Ref Frames Format settings, CABAC : No Format settings, CABAC : No Format settings, ReFrames : 1 Format settings, ReFrames : 1 frame Format settings, GOP : M=1, N=3 Internet media type : video/H264 Codec : AVC Codec : AVC Codec/Family : AVC Codec/Info : Advanced Video Codec Codec/Url : http://developers.videolan.org/x264.html Codec profile : [email protected] Codec settings : 1 Ref Frames Codec settings, CABAC : No Codec_Settings_RefFrames : 1 Width : 704 Width : 704 pixels Height : 480 Height : 480 pixels Pixel aspect ratio : 1.000 Display aspect ratio : 1.467 Display aspect ratio : 3:2 Standard : NTSC Resolution : 8 Resolution : 8 bits Colorimetry : 4:2:0 Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 Bit depth : 8 bits Scan type : Progressive Scan type : Progressive Interlacement : PPF Interlacement : Progressive Edit: Here is a sample video using the same encoding: https://www.dropbox.com/s/l5acwzy8rtqn9xe/sec-cam08-m-20121118-105815.h264 (not the same video as mediainfo output)

  Read the article

• How to install new Intel Ethernet driver

  - by Alex Farber

  Ubuntu 12.04 x64 doesn't recognize newest Intel Ethernet adapter on my desktop (Intel Ethernet Connection i217-V). I downloaded required driver from Intel and compiled it using make. Now I have: alex@alex64-six:~$ find / -name 'e1000e.ko' 2>/dev/null /home/alex/Documents/IntelEthernetDriver/e1000e-3.0.4/src/e1000e.ko /lib/modules/3.2.0-64-generic/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko The first line is new driver compiled from Intel sources. The second line is probably existing driver from Ubuntu distribution, which doesn't recognize new Ethernet adapter. How can I apply the new driver instead of existing one? Any other solution is welcome. For now, I cannot upgrade to latest Ubuntu release, because I use some third-party products.

  Read the article

• cannot delete IPv6 default gateway

  - by NulledPointer

  The commands below should be pretty self-explanatory. Please note that the route for which i get failure is obtained by RA and has very less expiry ( e Flag in UDAe). @vm:~$ ip -6 route 2001:4860:4001:800::1002 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1003 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1005 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:803::100e via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 fd00:ffff:ffff:fff1::/64 dev eth1 proto kernel metric 256 expires 2592300sec fe80::/64 dev eth1 proto kernel metric 256 default via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1 default via fe80::20c:29ff:fe87:f9e7 dev eth1 proto kernel metric 1024 expires 1776sec @vm:~$ @vm:~$ @vm:~$ @vm:~$ sudo route -6 delete default gw fe80::20c:29ff:fe87:f9e7 @vm:~$ ip -6 route 2001:4860:4001:800::1002 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1003 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1005 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:803::100e via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 fd00:ffff:ffff:fff1::/64 dev eth1 proto kernel metric 256 expires 2592279sec fe80::/64 dev eth1 proto kernel metric 256 default via fe80::20c:29ff:fe87:f9e7 dev eth1 proto kernel metric 1024 expires 1755sec @vm:~$ @vm:~$ @vm:~$ sudo route -6 delete ::/0 gw fe80::20c:29ff:fe87:f9e7 dev eth1 SIOCDELRT: No such process @vm:~$ @vm:~$ @vm:~$ route -n6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2001:4860:4001:800::1002/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 2001:4860:4001:800::1003/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 2001:4860:4001:800::1005/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 2001:4860:4001:803::100e/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 fd00:ffff:ffff:fff1::/64 :: UAe 256 0 0 eth1 fe80::/64 :: U 256 0 0 eth1 ::/0 fe80::20c:29ff:fe87:f9e7 UGDAe 1024 0 0 eth1 ::/0 :: !n -1 1 349 lo ::1/128 :: Un 0 1 3 lo fd00:ffff:ffff:fff1:a00:27ff:fe7f:7245/128 :: Un 0 1 0 lo fd00:ffff:ffff:fff1:fce8:ce07:b9ea:389f/128 :: Un 0 1 0 lo fe80::a00:27ff:fe7f:7245/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth1 ::/0 :: !n -1 1 349 lo @vm:~$ UPDATE: Another question is whats the use of link local address as the default route?

  Read the article

• Mutt not working due to "gnutls_handshake: A TLS packet with unexpected length was received." error

  - by Vinit Kumar

  I am expecting lots of problem trying to make mutt work in Ubuntu 12.04. Here is my .muttrc : http://paste.ubuntu.com/1273585/ Here is the bug I am getting when i tried to connect. gnutls_handshake: A TLS packet with unexpected length was received. Do anyone knows a workaround to fix this error.If so please suggest it asap. Many Thanks in Advance! For debug here is the output of my mutt -v: http://paste.ubuntu.com/1273590/

  Read the article

• Be able to create edit and move files to and from /var/www

  - by Ryan Murphy

  I have installed lamp on Ubuntu 12.04. I try to access /var/www but it doesn't allow me to do anything as it says I don't have permissions. I have tried: 1. gksudo nautilus - which works but its very inconvenient way of doing things. 2. sudo adduser ryan www-data sudo chown -R www-data:www-data /var/www sudo chmod g+rw /var/www The above didn't work. I have googled and searched this site for a solution, but all the existing possible solutions have not worked.

  Read the article

• Keyboard shortcuts are not working when unity plugin in ccsm is disabled?

  - by Pioneer11X

  I am using ubuntu 11.10 with unity 2d , I dont like the unity launcher and use Docky . So , i have created a new seeion and using some tweaking and playing around i have been successful to get rid of the unity launcher and make a perfect interface that i like , but there are two problems .. Keyboard shortcuts not working I had to disable the ubuntu unity plugin in ccsm to get rid of the unity laucher..when it is enabled , i can use the keyboard shortcuts such as alt+tab etc .. But when i disable it , I am unable to use some shortcuts , I can still use some shortcuts like alt+F4 ect. When I maximise a window , it used to show two window (close , maximise , minimize )buttons and title bars So , i set the window decoration in ccsm to !maxvert from any , and it is working fine for most of the time until i try to snsp the window to a side then the title bar just disappears , leaving space between the panel and the window , I cant close this window until i use the alt+mouse to drag it out , because no buttons would be displayed ..

  Read the article

• Issues running commands

  - by Joel

  Every time I run a command I get this back. E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied) E: Unable to lock directory /var/lib/apt/lists/ E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? christopher@christopher:~$ This didn't start happening until I changed my device name.

  Read the article

• Z600 Workstation ACPI Fan Noise

  - by dpb

  Hi -- I have an HP z600 workstation that has the FAN running full when idle. In fact, after the boot, the fan never slows down or varies. I looked in dmesg, and noticed this: [ 1.516778] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.516781] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.516786] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 1.519868] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.519872] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624638] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624642] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624726] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624729] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624802] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624805] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624895] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624898] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624977] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624981] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625070] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625074] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625153] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625157] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS Anyone know what could be done to fix this?

  Read the article

• Why do things change between using a LiveCD/LiveUSB and installing Ubuntu?

  - by ahow628

  Here have been a couple of weird experiences I've had with a Ubuntu LiveCD or LiveUSB: 1) I had one of the original Chromebooks (CR-48). I ended up wiping ChromeOS and installing only Ubuntu 12.04.0 just after it came out. It worked like a charm. About a year later, I broke something and reinstalled Ubuntu using 12.04.3 on a LiveUSB. The LiveUSB worked perfectly - screen resolution, wifi, trackpad all worked fine. I installed it (once installing updates, once stock from the USB drive) and both times screen resolution, wifi, and trackpad all broke. I ended up downloading 12.04.0 and installing it then upgrading to 12.04.3 after the fact and everything worked perfectly once again. 2) I purchased a Toshiba Portege z935 and the LiveUSB worked perfectly, namely the wifi. After install, wifi was extremely slow and basically couldn't load any pages. The answer was that Bluetooth conflicted somehow with wifi and Bluetooth had to be disabled to get wifi to work. Yet both could be enabled in the LiveUSB version, no problem. So my question is, why does this happen? Why does everything work perfectly from the LiveUSB version but then get broken when installed on the system? Is there a different way to install Ubuntu that would allow things to be installed over exactly as they were on the LiveUSB version (drivers, settings, etc)? Are there assumptions that the install makes that I could override somehow?

  Read the article

• I am trying to build libmtp 1.1.14 but I cannot fix this error

  - by Kristoffer

  I have run this in a terminal. git clone git://libmtp.git.sourceforge.net/gitroot/libmtp/libmtp cd libmtp ./autogen.sh (answering yes to all questions) But when I try to run the ./configure --prefix=/usr/ I get this error: checking whether to build static libraries... yes ./configure: line 11739: AC_LIB_PREPARE_PREFIX: command not found ./configure: line 11740: AC_LIB_RPATH: command not found ./configure: line 11745: syntax error near unexpected token `iconv' ./configure: line 11745: ` AC_LIB_LINKFLAGS_BODY(iconv)' I have built and installed the libiconv from here. I do not know what to do, been trying for a few hours but I am pretty noob to Linux. How can i fix this? The lines 11739 to 11745 in the configure file looks like this: AC_LIB_PREPARE_PREFIX AC_LIB_RPATH AC_LIB_LINKFLAGS_BODY(iconv)

  Read the article

• Prevent service from starting

  - by Evan Plaice

  So, I do Arduino development on my system to program arduinos using the FTDI USB programming interface (if you have no idea what this means don't worry). The issue arises because the FTDI interface uses tty to communicate and it conflicts with one of the default ubuntu services. The default service in question is called brltty (which enables braille accessibility for people with impaired vision). Considering that I don't have any particular use for this service and it's annoying to stop it manually (using 'service brltty stop') after I restart my system... Where would I configure this (or any) service to prevent it from loading on startup? Note: I also have this issue with qemu-kvm conflicting with virtualbox.

  Read the article

• how to set environment variable in eric IDE

  - by ng0323

  I have no problem running a python script from the terminal, but in eric IDE, I am getting this error: ImportError libcudart.so.6.0: cannot open shared object file: No such file or directory Perhaps it's an enviroment variable that needs to be set. In eric, when I run script, I filled in the environment option as follows. I tried set PATH = usr/local/cuda-6.0/bin or PATH = /usr/local/cuda-6.0/bin or just /usr/local/cuda-6.0/bin and they all didn't work.

  Read the article

• Unable to install updates on 14.04 LTS

  - by Mike

  I have been getting update notifications for a few weeks now but whenever I attempt to install them I get this message; The upgrade needs a total of 74.6 M free space on disk '/boot'. Please free at least an additional 29.8 M of disk space on '/boot'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'. First of all I don't have permission to access /boot (don't know why as its a standalone machine and i'm the only user). Secondly, I emptied the trash; Thirdly, I launched Terminal and entered sudo apt-get clean I was a asked for a sudo password. I entered my system password. Re-entered sudo apt-get clean. The cursor stopped blinking - I assumed it was doing it's "thing". I let it go for about 10 minutes then exited Terminal. Tried to install the updates but just got the same message. Is there something i'm ignorant of? This is the output I get from the command df -h and I have no idea what it all means! @Tim, What's bash and why am I denied access to fstab and /boot? mike@mike-MS-7800:~$ /etc/fstab bash: /etc/fstab: Permission denied mike@mike-MS-7800:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu--vg-root 913G 11G 856G 2% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 1.7G 4.0K 1.7G 1% /dev tmpfs 335M 1.6M 333M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 1.7G 14M 1.7G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sda2 237M 182M 43M 81% /boot /dev/sda1 487M 3.4M 483M 1% /boot/efi /dev/sr1 31M 31M 0 100% /media/mike/Optus Mobile mike@mike-MS-7800:~$ I ran this from the terminal and all is now working. dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' | xargs sudo apt-get -y purge

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >