Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 97/176 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

  • 11.04 radeon screen tearing oddity

    - by Kevin Qiu
    I have a mobility radeon 5850 running 11.04 and am running catalyst 11.10 drivers. I noticed that whenever I have two windows open, one of top of the other, scrolling results in minor screen tearing, usually around the border of the window on the bottom. When I minimize or close the bottom the tearing goes away. I have tear free desktop enabled and tried looking for this specific issue but couldn't find anyone else with it. It happens in both Unity and Classic. Is there any fix for this?

    Read the article

  • Intel NUC Video Blur

    - by donopj2
    I recently purchased the D34010WYKH NUC and I figured this would be a great time to make the jump to a Linux based system. I'm running Ubuntu 14.04, and I'm having an issue with video rendering that is driving me mad. Essentially videos (all 1080p mkv files) appear to be slowly blurring, and its most noticeable when the camera remains on a scene for a long period of time. Then all of a sudden the video will correct the blur and the image will be sharp, only to begin happening again followed by more sudden and noticeable corrections. I have seen the exact same issue in both VLC and XBMC and across several different videos. I have installed the latest Intel graphics drivers, and searched the web but to be honest I'm not sure how to accurately describe this problem. I'm also quite new to the OS, so my experience tinkering is limited. Has anyone experienced this type of issue before? Can it be resolved?

    Read the article

  • How to make a disk image and restore from it later?

    - by torbengb
    I'm a new Linux user. I've reinstalled my Wubi from scratch at least ten times the last few weeks because while getting the system up and running (drivers, resolution, etc.) I've broken something (X, grub, unknowns) and I can't get it back to work. Especially for a newbie like me, it's easier (and much faster) to just reinstall the whole shebang than try to troubleshoot several layers of failed "fixing" attempts. Coming from Windows, I expect that there is some "disk image" utility that I can run to make a snapshot of my Linux install (and of the boot partition!!) before I meddle with stuff. Then, after I've foobar'ed my machine, I would somehow restore my machine back to that working snapshot. What's the Linux equivalent of Windows disk imagers like Acronis True Image or Norton Ghost?

    Read the article

  • Webcast Reminder: Implementing IDM in Healthcare, September 19th @10:00 am PST

    - by Darin Pendergraft
    Join me and Rex Thexton from PwC tomorrow (September 19th) as we review an IDM project that Rex and his team completed for a large healthcare organization.  Rex will talk through the IT environment and business drivers that lead to the project, and then we will go through planning, design and implementation of the Oracle Identity Management products that PwC and the customer chose to complete the project. This will be a great opportunity to hear about the trends that are driving IT Healthcare, and to get your Identity Management questions answered. If you haven't already registered - Register Here!

    Read the article

  • Ubuntu on AMD based Sony Vaio VPCY B15AG

    - by Gaurav
    Last week I bought a AMD E350 (AMD Fusion platform) based Sony VAIO (VPCYB15AG) having AMD Radeon HD 6310 graphics, I removed Windows that came along with and installed Ubuntu 10.10 (AMD64) using USB drive. During installation my touchpad was not working, I managed through keyboard, but after completing installation & restarting the machine still there was no touchpad support. Also there's no proper graphic card drivers. Even I tried connecting the USB mouse to it but the left key is not working and had to configure the mouse as left-hand to get the left click enabled. I tried searching for any possible solutions for these but found nothing helpful, is there any hope? What should I do to enable i) enable touch pad support ii) get higher resolution 1366x768, etc?

    Read the article

  • Global Perspective: Oracle AppAdvantage Does its Stage Debut in the UK

    - by Tanu Sood
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Global Perspective is a monthly series that brings experiences, business needs and real-world use cases from regions across the globe. This month’s feature is a follow-up from last month’s Global Perspective note from a well known ACE Director based in EMEA. My first contribution to this blog was before Oracle Open World and I was quite excited about where this initiative would take me in my understanding of the value of Oracle Fusion Middleware. Rimi Bewtra from the Oracle AppAdvantage team came as promised to the Oracle ACE Director briefings and explained what this initiative was all about and I then asked the directors to take part in the new survey. The story was really well received and then at the SOA advisory board that many of these ACE Directors already take part in there was a further discussion on how this initiative will help customers understand the benefits of adoption. A few days later Rick Beers launched the program at a lunch of invited customer executives which included one from Pella who talked about their projects (a quick recap on that here). I wasn’t able to stay for the whole event but what really interested me was that these executives who understood the technology but where looking for how they could use them to drive their businesses. Lots of ideas were bubbling up in my head about how we can use this in user groups to help our members, and the timing was fantastic as just three weeks later we had UKOUG_Apps13, our flagship Applications conference in the UK. We had independently working with Oracle marketing in the UK on an initiative called Apps Transformation to help our members look beyond just the application they use today. We have had a Fusion community page but felt the options open are now much wider than Fusion Applications, there are acquired applications, social, mobility and of course the underlying technology, Oracle Fusion Middleware. I was really pleased to be allowed to give the Oracle AppAdvantage story as a session in our conference and we are planning a special Apps Transformation event in March where I hope the Oracle AppAdvantage team will take part and we will have the results of the survey to discuss. But, life also came full circle for me. In my first post, I talked about Andrew Sutherland and his original theory that Oracle Fusion Middleware adoption had technical drivers. Well, Andrew was a speaker at our event and he gave a potted, tech-talk free update on Oracle Open World. Andrew talked about the Prevailing Technology Winds, and what is driving this today and he talked about that in the past it was the move from simply automating processes (ERP etc), through the altering of those processes (SOA) and onto consolidation. The next drivers are around the need to predict, both faster and more accurately; how to better exploit the information that we have available. He went on to talk about The Nexus of Forces: Social, Mobile, Cloud and Information – harnessing these forces of change with Oracle technology. Gartner really likes this concept and if you want to know more you can get their paper here. All this has made me think, and I hope it will make you too. Technology can help us drive our businesses better and understanding your needs can be the first step on your journey, which was the theme of our event in the UK. I spoke to a number of the delegates and I hope to share some of their stories in later posts. If you have a story to share, the survey is at: https://www.surveymonkey.com/s/P335DD3 About the Author: Debra Lilley, Fujitsu Fusion Champion, UKOUG Board Member, Fusion User Experience Advocate and ACE Director. Debra has 18 years experience with Oracle Applications, with E Business Suite since 9.4.1, moving to Business Intelligence Team Leader and then Oracle Alliance Director. She has spoken at over 100 conferences worldwide and posts at debrasoraclethoughts Editor’s Note: Debra has kindly agreed to share her musings and experience in a monthly column on the Fusion Middleware blog so do stay tuned…

    Read the article

  • Platform Builder: Disable the USB Driver Dialog

    - by Bruce Eitman
    For a long time, Windows CE developers and users have wanted to disable the USB Driver Dialog that is displayed when an unknown USB device is plugged into the host controller.   Of course the question is always why would you want to do such a thing? The simple answer is that there are USB devices that are needed, like printers, which expose multiple functions to the bus, like scanners and faxes, which no Windows CE driver exists to support.   So the printer quietly loads a driver, but then the other functions cause a dialog to be shown. One solution is to create a USB Class driver that loads by default if no other driver has been loaded. This driver just accepts anything that it sees and then does nothing with it. Starting with the Windows Embedded CE 6.0 R3 March QFE/update, the USB 2.0 driver has a registry value to disable the dialog: [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients]       "DoNotPromptUser"=dword:0   Setting the DoNotPromptUser value to 1 disables the dialog. The default value is zero, so the driver continues to behave in the same way it always did unless you change this registry value.     Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Nvidia G96 [GeForce 9400 GT] and application graphic issues

    - by Fabio
    I've got a quite old NVIDIA graphic card and I with installed restricted drivers from Settings panel (as also shown in this thread). ? ~ lspci 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1) I tried a lot of them: version 173-update, current, beta, but the only one that can run unity-2d it's current-update. That's Ubuntu 12.04.1 LTS 64bit. However... Unity crashes, sometimes windows border disappear, Java Virtual Machine doesn't works, font rendering it's slow and so on. How can I solve this? Some suggestions? Thanks!

    Read the article

  • How to Use a PS3 Controller as a Joystick for Your Windows PC

    - by Zainul Franciscus
    Do you find it hard to steer your mouse and hit the right keyboard key to play PC games? If you happen to have PS3 controllers, why not use them as Joysticks to play games? Image by AlphaCoders Before we begin, head over to MotionInJoy website to install the required drivers for Windows. The installer comes for both x86 (32-bit operating system) and x64 (64-bit operating system), so make sure you download the right installer for your system. If you are in doubt, just go to Start -> Control Panel –> System, to verify your system settings. HTG Explains: What Are Character Encodings and How Do They Differ?How To Make Disposable Sleeves for Your In-Ear MonitorsMacs Don’t Make You Creative! So Why Do Artists Really Love Apple?

    Read the article

  • Blank screen after installing nvidia restricted driver

    - by LaMinifalda
    I have a new machine with a MSI N560GTX Ti Twin Frozr II/OC graphic card and MSI PH67A-C43 (B3) main board. If i install the current nvidia restricted driver and reboot the machine on Natty (64-bit), then i only get a black screen after reboot and my system does not respond. I can´t see the login screen. On nvidia web page i saw that the current driver is 270.41.06. Is that driver used as current driver? Btw, i am an ubuntu/linux beginner and therefore not very familiar with ubuntu. What can i do to solve the black screen problem? EDIT: Setting the nomodeset parameter does not solve the problem. After ubuntu start, first i see the ubuntu logo, then strange pixels and at the end the black screen. HELP! EDIT2: Thank you, but setting the "video=vesa:off gfxpayload=text" parameters do no solve the problem too. Same result as in last edit. HELP. I would like to see Unity. This is my grub: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="video=vesa:off gfxpayload=text nomodeset quiet splash" GRUB_CMDLINE_LINUX=" vga=794" EDIT3: I dont know if it is important. If this edit is unnecessary and helpless I will delete it. There are some log files (Xorg.0.log - Xorg.4.log). I dont know how these log files relate to each other. Please, check the errors listed below. In Xorg.1.log I see the following error: [ 20.603] (EE) Failed to initialize GLX extension (ComIatible NVIDIA X driver not found) In Xorg.2.log I see the following error: [ 25.971] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.971] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 25.971] (==) NVIDIA(0): RGB weight 888 [ 25.971] (==) NVIDIA(0): Default visual is TrueColor [ 25.971] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.077] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ 26.078] (EE) NVIDIA(0): check your system's kernel log for additional error [ 26.078] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the [ 26.078] (EE) NVIDIA(0): README for additional information. [ 26.078] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! [ 26.078] (II) UnloadModule: "nvidia" [ 26.078] (II) Unloading nvidia [ 26.078] (II) UnloadModule: "wfb" [ 26.078] (II) Unloading wfb [ 26.078] (II) UnloadModule: "fb" [ 26.078] (II) Unloading fb [ 26.078] (EE) Screen(s) found, but none have a usable configuration. [ 26.078] Fatal server error: [ 26.078] no screens found [ 26.078] Please consult the The X.Org Found [...] In Xorg.4.log I see the following errors: [ 15.437] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.437] (==) NVIDIA(0): RGB weight 888 [ 15.437] (==) NVIDIA(0): Default visual is TrueColor [ 15.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0) [ 15.703] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.703] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00 [ 15.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.703] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 15.703] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at [ 15.703] (--) NVIDIA(0): PCI:1:0:0 [ 15.703] (--) NVIDIA(0): none [ 15.706] (EE) NVIDIA(0): No display devices found for this X screen. [ 15.943] (II) UnloadModule: "nvidia" [ 15.943] (II) Unloading nvidia [ 15.943] (II) UnloadModule: "wfb" [ 15.943] (II) Unloading wfb [ 15.943] (II) UnloadModule: "fb" [ 15.943] (II) Unloading fb [ 15.943] (EE) Screen(s) found, but none have a usable configuration. [ 15.943] Fatal server error: [ 15.943] no screens found EDIT4 There was a file /etc/X11/xorg.conf. As fossfreedom suggested I executed sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup However, there is still the black screen after reboot. EDIT5 Neutro's advice (reinstalling the headers) did not solve the problem, too. :-( Any further help is appreciated! EDIT6 I just installed driver 173.xxx. After reboot the system shows me only "Checking battery state". Just for information. I will google the problem, but help is also appreciated! ;-) EDIT7 When using the free driver (Ubuntu says that the free driver is in use and activated), Xorg.0.log shows the following errors: [ 9.267] (II) LoadModule: "nouveau" [ 9.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.267] (II) Module nouveau: vendor="X.Org Foundation" [ 9.267] compiled for 1.10.0, module version = 0.0.16 [ 9.267] Module class: X.Org Video Driver [ 9.267] ABI class: X.Org Video Driver, version 10.0 [ 9.267] (II) LoadModule: "nv" [ 9.267] (WW) Warning, couldn't open module nv [ 9.267] (II) UnloadModule: "nv" [ 9.267] (II) Unloading nv [ 9.267] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.267] (II) LoadModule: "vesa" [...] [ 9.399] drmOpenDevice: node name is /dev/dri/card14 [ 9.402] drmOpenDevice: node name is /dev/dri/card15 [ 9.406] (EE) [drm] failed to open device [ 9.406] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.406] (WW) Falling back to old probe method for fbdev [ 9.406] (II) Loading sub module "fbdevhw" [ 9.406] (II) LoadModule: "fbdevhw" EDIT8 In the meanwhile i tried to install WIN7 64 bit on my machine. As a result i got a BSOD after installing the nvidia driver. :-) For this reason i sent my new machine back to the hardware reseller. I will inform you as soon as i have a new system. Thank you all for the great help and support. EDIT9 In the meanwhile I have a complete new system with "only" a MSI N460GTX Hawk, but more RAM. The system works perfect. :-) The original N560GTX had a hardware defect. Is is possible to close this question? THX!

    Read the article

  • Screen tearing oddity when one window is on top of another with Radeon

    - by Kevin Qiu
    I have a mobility radeon 5850 running 11.04 and am running catalyst 11.10 drivers. I noticed that whenever I have two windows open, one of top of the other, scrolling results in minor screen tearing, usually around the border of the window on the bottom. When I minimize or close the bottom the tearing goes away. I have tear free desktop enabled and tried looking for this specific issue but couldn't find anyone else with it. It happens in both Unity and Classic. Is there any fix for this?

    Read the article

  • shader3 not enabled error in Eve Online Crucible

    - by Matt Vercoe
    I'm a complete noob at this, and have been trying everything to run Eve Online within Ubuntu 11.10. I have installed through Winetricks no problem, and have enabled the virtual windows desktop within Winetricks. My problem is that after the splash screen for Eve, I get an error message telling me that shader 3 is not enabled. I have an old GEForce 7300LE, but it does support shader 3. I have also tried a few different drivers with no luck. I have tried looking within the NVidia X setting, but can't find anything. Running Eve on Windows 7 is the only reason I'm still using windows, so any help to run it on Ubuntu would be very appreciated, as I'm pulling my hair out trying to figure out something which should be simple.

    Read the article

  • Help with Zotac zbox nano ad10 mini pc ?

    - by Razor
    I have a Zotac Zbox nano ad10. I have it connected to a Samsung Syncmaster t220hd monitor via a HDMI cable for audio and sound, everything else works apart from sound. I have tired Ubuntu 11.04, 11.10, 12.04 beta 1, LinuxMint 12, Lubuntu 11.10, and other Linux distributions all with the same issue. On Zotac's website I don't see any Linux drivers to help the issue ? Please help, thank you in advance to everyone. I have also tried to install windows 7 on this same computer and the audio works fine. it just does not want to work with Linux.

    Read the article

  • Guide to particulars in preseeding Ubuntu Installer

    - by Oxwivi
    I've tried reading through guides for preseeding, but I did not understand how and where to modify which options. I can only comfortably learn through practical examples, for which I ask this question. I am looking into preseeding solution to just do a few specific tasks: Completely rewrite the packages installed by default, much like minimal installs Add a few proprietary applications to the default install list Automatically install and mount proprietary drivers on install and live session Edit the default configuration files for applications installed by default Specify partitions along with permission Can anyone please tell me how to configure preseed option to only do the above? PS The third point is of particular importance.

    Read the article

  • Multiple problems while installing Ubuntu 13.04 on LENOVO G500 laptop

    - by Balazs Kiss
    Dear Community, I encountered several problems when installing Ubuntu on my new Lenovo G500 laptop. First I bumped in the problem (also reported by many other) of the black screen after booting Ubuntu. This problem I recould solve by changing the "quiet splash" record of GRUB to "nomodeset". Ubuntu install was successful then. After the installation, I had a black screen again when booting up for the first time. I booted up again with "nomodeset", and enabled the external AMD driver at Hardware Drivers. Booting still do not worked (only with nomodeset), and when I log in, the system gives me a "System program problem detected" message, and the system (desktop) does not load in. Please, can you advise me what to do? Shall I re-install Ubuntu? What are the steps to make my ubuntu work with this harver? Hardware: LENOVO G500 with IntelCore i5-3230M 3,2Ghz processor and AMD Radeon HD8570 integrated chip Thank you for your help in advance!

    Read the article

  • Unable to overscan at lower resolution with AMD ATI

    - by Basavaraj
    I am running Ubuntu 12.04 with the latest ATI drivers installed. I have the catalyst option but I am unable to set overscan. My default resolution is 1920*1080 on 15inch display. I want to set it to a lower resolution. But on setting it to any lower resolution the display shrinks i.e I see black chopped off display on the left and on the right :( Really frustrating this, wasted hours on this already. I realized that this is referred to as overscan, but the ATI Catalyst Administrative just does not allow me to set the option. Can someone please through some light on this topic?

    Read the article

  • Fan control on Acer Aspire One D255 netbook

    - by AdamB
    I have Ubuntu netbook edition on my Acer Aspire One D255 netbook and I notice that I always hear the fan working at 100% despite the actual temperature. I run the sensors command its only at 13c, theres no reason why the fan needs to be running this hard at that temp. root@adam-netbook:~# sensors acpitz-virtual-0 Adapter: Virtual device temp1: +13.0°C (crit = +100.0°C) I'm guessing I may need some drivers in order to interact with the fan? Does anyone have any experience with this? It also seems that "sensors" may not be all that accurate, the temperature never seems to fluctuate.

    Read the article

  • Installed nvidia driver, activated it, and now Unity is gone. No bars, menus, nothing

    - by Noel
    I installed the nvidia driver (installed the ubuntu-x-swat ones, updated them, got the updates for them, installed bumblebee. I restarted everytime I did those steps, so no, i don't simply need to 'restart X'. I tried to run things using bumblebee, but bumblebee was like "can't access GPU driver". So I ran nvidia-settings, it said the drivers weren't in use, so I ran "sudo nvidia-xconfig", then restarted. Now, my login screen looks differently than it did before: it asks me if I want to load: "GNOME, GNOME - no effects, Cairo Dock - GNOME, System Default, or Ubuntu" when I log in, but WORST OF ALL: i no longer have any kind of GNOME/unity GUI. There are no title bars above any windows, no close/minimize/maximize buttons. The unity bar is gone, and will not show up when I call it. And the top status bar is also no longer there.

    Read the article

  • Will unity stop being a plugin for Compiz?

    - by Murphy1138
    I ask this as with the Unity Desktop running , when I try any games with my Ubuntu 12.04.1 I get so much frame rate drop with Unity and Compiz. If I switch to Gnome-Classic which uses mutter, I get a vast boost in performance. My system is an 8 core AMD with a Nvidia 460 SE that can play anything I chuck at it in Windows and I'm using the latest Nvidia drivers, but even simple games like the humble bundle gets serious lag with Unity and the only cause of this can be compiz (what I can guess). When Steam come to Ubuntu, how will this performance loss be addressed?

    Read the article

  • No Launcher, Messed Resolution and Artifacts!

    - by Felipe Ribeiro R. Magalhaes
    I installed Ubuntu 12.10 on my desktop, and it boot up ok, but I was having some artifacts, so I read somewhere that I needed nvidia drivers, I downloaded them, along with compiz (I enjoy the nice effects), but after that, when I rebooted the computer, the resolution was all messes up, and now I can't access anything because there is no launcher! I inserted Ubuntu CD, booted from the CD, the resolution was fine and eerything was OK, so I repaired the installation, but after restarting the computer it was all messed up again! Please help me! I'm running Ubuntu 12.10 on a Core i7 and a GTX 460 + GTX 280! How Ubuntu looks as soon as I turn on my computer on:

    Read the article

  • How To Create a Portable USB Version of Microsoft Office Starter 2010

    - by Taylor Gibb
    Microsoft Office 2010 Starter edition is a free, ad-supported version of Office 2010 meant to be included on new PCs. It only includes Word and Excel with a subset of features—but it does let you make a portable version. Here’s how to do it. Note: The download link provided in the following article is not exactly a “Microsoft Approved” link and may stop working at any time. Still, the Starter version of Office is meant to be ad-supported freeware, and they haven’t pulled the download despite widespread use of it online. How to See What Web Sites Your Computer is Secretly Connecting To HTG Explains: When Do You Need to Update Your Drivers? How to Make the Kindle Fire Silk Browser *Actually* Fast!

    Read the article

  • How do I get Flash 10.2 RC + Crystal HD for HW accelerated video to work?

    - by Gee
    I have a netbook with a N450 Atom and a BCM70012 aka Crystal HD card. On Windows 7 I can play HD flash video with very little CPU usage because of the RC of Flash 10.2. I did some reading and saw posts claiming that the Crystal HD card is finally supported by the newer Flash 10.2 RC in Ubuntu but I can't get it to work. I can confirm that flash 10.2 is loaded and used, and there's even a HW acceleration option that is enabled in the settings but performance is horrible. From what I read, the Crystal HD card is supposed to be enabled on 10.10 by default - I don't know if it is. I tried installing drivers for it in various ways but HD flash video is still a slideshow So does anyone have it working? If so, how'd you set it up?

    Read the article

  • Monitor resolution messed up, monitor is unknown.

    - by Kaustubh P
    Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

    Read the article

  • Does Ubuntu Touch consume less than Android?

    - by Eduard Florinescu
    One of the problems of new OSs is power consumption. That is because power and performance requires a lot of tweaks and experience with the kernel, drivers and OS code-base on one hand, and a lot of extensive long-term test and quality assurance on the other hand. Given that Android is a rather old and established OS I saw that it has pretty good power consumption. Phoronix does this kind of comparissions but I was not able to find to much about Ubuntu Touch. Does Ubuntu Touch consume less than Android in general, do you have data on some platforms compared?

    Read the article

  • After re-installing ubuntu 13.10, stuck at GRUB Rescue, Boot-Repair didn't work!

    - by user205691
    Because i could not get the WiFi login work, i thought i will reinstall ubuntu, with internet connection to have updated drivers for wireless & graphics etc. I have deleted earlier linux partitions usings gparted and re-installed ubuntu 13.10, exactly following the same steps as i did earlier, making a 100GB /home on dev/sda and pointing root to /dev/sdb (SSD) and swap on dev/sda/ . Installing boot on /dev/sdb. But, somehow i think the grub is either corrupted or removed because i am unable to boot the laptop to any OS now. I get the following message: "no such device" xxxxx followed by huge HEX number GRUB rescue when i type ls on Grub rescue prompt, i can see hd0 & hd1, but thats about it. i tried Boot-repair but it is unable to fix the problem. The following log is generated via boot-repair create log: Boot-repair log I am unable to boot into windows or linux at the moment and need help to fix the grub so i can boot !!

    Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >