Search Results

Search found 3887 results on 156 pages for 'processor simulator'.

Page 97/156 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Laptop display not working unless DVI cable is plugged in

  - by marien

  I have a Lenovo ThinkPad T420 with an i5 processor and integrated graphics. I dropped the laptop and now the screen is not working. I replaced the screen and it is still not working. It shows the BIOS and then at Windows login the screen gets all static looking. But if I plug in a DVI-to-HDMI cable the laptop starts and works fine. Even the external display works and the laptop display works too. As soon as I unplug the cable the screen crashes and is all static. I cannot figure out the problem. The video works because the external screen still works. How can I fix this?

  Read the article

• Poor CPU usage under Ubuntu

  - by remek

  Hello, I just upgraded from Ubuntu 9.10 to Ubuntu 10.04 and I am now experiencing a strange problem. My computer has a quad-core processor, and when I am running several processes simultaneously, none of the cores is fully used. Before the upgrade, when I was running 4 processes, each of them was using 100% CPU (I could see that with the 'top' command). But now, CPU usage oscillates and is always pretty low. Has anybody an idea about this problem? Is it due to Ubuntu or to the program I am running? Thank you very much in advance for your help! Best, remek

  Read the article

• After installing Windows 8, boot hangs before BIOS setup

  - by Joe Purvis

  I have an Alienware M15x, 940MX processor, 16 GB RAM, 512GB M4 SSD, and I was running Win7 64bit. I backed up the disk and ran Win 8 setup. Setup appeared to go well through multiple reboots. After the last reboot, it simply stopped after POST at "Press F2 for bios setup". I have tried powering off, reducing RAM to one stick, removing MOS battery. Now, it gets to the screen with "Press F2 for setup" and "Press F12 for boot options". If I press F2, I get a single beep only. If I press F12, nothing. I cannot get into the BIOS to change boot options to boot from another disk and restore. I do have the latest BIOS. I am going to try replacing the CMOS battery, but I don't think that is likely to help. The computer has been fast and very reliable until now.

  Read the article

• putty ssh client become not responding frequently in windows 7

  - by Sankaran

  with celeron processor and 512 MB ram windows 7 takes too much time even to open a folder in windows explorer. I connect to internet with GPRS modem. When I tried to connect with remote linux machine with putty ssh client. The problem is the putty becomes Not responding in 2 or 3 minutes. I've to connect again and putty goes Not responding again. When i tried in Safe mode with networking, GPRS modem is not even detected. the modem is USB data card. Is it possible load USB drive in safe mode of windows 7 or any other possibility to connect with remote machine via ssh

  Read the article

• Laptop hot after format [migrated]

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Why won't Windows use the other CPU cores?

  - by revloc02

  In Windows Task Manager the Performance tab shows the first CPU maxed out, the other 7 just idling along with the occasional spike. What gives? More info: I've got 8GB and only 4.5GB are being used. The Processes tab has no indication of any process hogging processing power. In fact System Idle Process is 98-99. When I program stuff and have like 8 to 12 applications going (several directly unrelated to programming of course) my computer slows to a crawl. Sysyem Info: Intel Core i7-2600K Processor (quad-core with hyper-threading), 8GB RAM, Intel BOXDZ68BC LGA 1155 Motherboard, 500GB HDD

  Read the article

• Is there a RAR extractor (for multiple rar files like .r00 etc.) that will use all of my quad cores?

  - by Christopher Done

  I've got a quad core Intel processor. I've got a big file split into little ones as RAR files, foo.r00, foo.r01, etc. which the RAR program extracts into one file/directory. Is there a RAR program that I can specify like "use four cores" in the extract process? At the moment it sits there using 100% of one core. I recognise the bottleneck might be my hard drive anyway, but I don't see a lot of HD usage and suspect the decompression process is more intensive than waiting on I/O. For example, GNU Make accepts a (-j, I think) argument to tell it how many cores to use, which I used to compile PHP 6 really quickly.

  Read the article

• MSSQL, ASP.NET, IIS. SQL Server perfmon log question

  - by Datapimp23

  Hi, I'm testing a web application that runs on a hypervisor. The database server and the webserver are seperate vm's that run on the same hypervisor. We did some tests and the functions perform ok. I want you guys to look at a screenshot of a permon log of the sql 2005 server on the busiest moment. The webserver perfmon log looks fine and it's obvious that we have enough resources to present the page in a timely fashion. http://d.imagehost.org/view/0919/heavyload http://d.imagehost.org/0253/heavyloadz.jpg Zoomed out The striped blue line maxing out is the Processor que length (scale 100,0) The green line at around value 30 is Available MBytes (scale 0,01) The rest of the counters are visible on the screenshot. The sql server machine has no CPU limitations on the hypervisor resources and has 5 vcpu's and 5 GB RAM. Can someone help me to interpret this log. Thanks

  Read the article

• Is running multiple databases on login going to make my Mac really slow?

  - by Walrus the Cat

  Sometime ago, I installed Postgres, and the Launch agent that causes it to run when I log in. Just now, I did the same thing for Mongo. I was just about to do it for Couch. I don't remember if I ever did it for MySQL, but I probably did. Mongo and Couch are just 'when I have time to look into it' sort of things, but I don't want to have to remember to start them when I do. I have a 2.4 Ghz processor and 8 GB ram. Is this sort of behavior going to significantly impact my computer's performance? Should I be scrambling to uninstall all but the database I'm currently using, or can I install all the things and run them all the time? Thanks

  Read the article

• TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot

  - by Tibi

  TrueCrypt - "Warning! Password locked: Fixed disk0" error message on boot. When i start my laptop (Acer TravelMate 2410). after the starting memory check, the screen goes full black, and a message appears for about 3 seconds: Warning! Password locked: Fixed disk0 and after that, disappears, and next message comes out: Operating System Not Found and all stops here. Windows Xp was installed on it, before this came. TrueCrypt cd (witch was made during the process of full encryption) is not working, not in restoring MBR, no even in decrypting my drive - completely useless. Note: I detected some short of boot sector errors (i dont know the amount) on my drive before this happened. Please, i would greatfully thank every comment, or suggestion, because my computer is unusable now. The HDD is a Samsung HDD, 160Gb. Other preferences: Acer TravelMate 2410 Notebook, 2 Gb RAM, 1500 Mhz Intel Celeron M processor. Regards

  Read the article

• Evaluate a vendor laptop before deployment to user?

  - by NetWarrior

  I get numerous requests from executives and users for new smaller laptops for travel purposes. Most of my evaluation is based upon whether or not it can run certain applications. Mainly lotus notes, office, and video. Most of the laptops include windows 7 OS, and are fully loaded with ram, a high-end processor and a integrated graphics card. My boss whats me to document the usefulness of the laptop and performance. I'm just a little confused on how to setup a document that can be used by members of the IT department for future evaluations.

  Read the article

• why is 64 bits version called AMD64 and 32 bits version called i386?

  - by ajsie

  I have never understood this. This is what i know: 64 bits OS if you want to handle more than 2GB RAM. Else, 32 bits OS. So on Ubuntu's homepage you can download either 64 bits or 32 bits. But the 64 bits is called amd64 and the 32 bits is called i386. So i have to have a AMD processor to run amd64? And intel to run i386? And if someone codes a software (lets say Apache). Does he have to code one 32 bits and one 64 bits? Do some softwares only exist for 32 and not 64 and vice versa? Thanks in advance!

  Read the article

• Video/Image processing on Apple iPhone4 [closed]

  - by goldenmean

  Hello, I know apple iPhone4 support H.264 and MPEG-4 as the supported video codecs, and JPEG,M-JPEG as image codecs. I was looking to get some information on Apple iPhone4 Video, Image Codec and Processing Chips/SoC parts. 1] Does anyone know, Which vendor provides the SoC's to enable this image / video compression and processing solutions in iPhone4. 2] Are the video/image codec solutions - 'Software codecs' on a specialized dsp-core/processor or hard wired as in a FPGA/ASIC solution. Any pointers would be useful. thank you. -AD.

  Read the article

• Can I run virtualized 64-bit Operating Systems if my CPU doesn't support VT-X?

  - by tintinmj

  I have installed VMWare 10.0 workstation on my Compaq CQ60-615DX laptop. The Operating System is Windows 7 Home Premium. When I tried to run Ubuntu 14.04 64-bit in a virtual machine in VMWare I get an error saying: This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x. For more detailed information, see http://vmware.com/info?id=152. So I googled and found that I have to enable Intel VT-x. But I found out that my processor doesn't support Intel® Virtualization Technology (VT-x). So am I doomed and can I never run any virtual OS on my laptop? Or can I run 32-bit OSes?

  Read the article

• Getting console2 to work nicely with UAC

  - by Merlyn Morgan-Graham

  I would like to get console2 to work nicely with UAC Particular problems I would like to tackle: If I start non-elevated, have a way to elevate while running. It'd be especially nice if I could elevate individual tabs I would like to get different coloring for admin/non-admin, similar to: this link. Basically, if I can get the console to execute a command on startup (similar to the HKLM\Software\Microsoft\Command Processor\AutoRun registry value), that's all I need How do I get this working? Would I have to modify source code to get this to work, or can I use different tab settings/do hacks w/ shell executables? I am using Windows 7, although I would imagine any working solution would also work on Vista.

  Read the article

• Is it possible to run a "Windows Server 2008 R2 SP1 Hyper-V Virtual Machine" on Windows 7x64 Pro machine?

  - by tbone

  Specifically, I want to run this: http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=27417 This download contains a three Windows Server 2008 R2 SP1 Hyper-V Virtual Machine set for evaluating and demonstrating Office 2010, SharePoint 2010 and Project Server 2010. System requirements Supported operating systems: Windows Server 2008 R2 Additionally you will need: •Windows Server 2008 R2 (SP1 recommended) with the Hyper-V role enabled. •Drive Formatting: NTFS •Processor: Intel VT or AMD-V capable •RAM: 8 GB or more recommended •Hard disk space required for install: 100 GB ------------------------- So, the above text seems to indicate that you need a physical Windows 2008 Server (r2) server running, but from the googling I've done on the subject I've yet to come across a discussion that definitively answers the question. Many posts I've read seem to indicate it might be possible to run it on Windows 7 using one of the following: VirtualBox, Windows Virtual PC, VMWare but I'm not entirely sure.

  Read the article

• SSD runs faster on Windows as compared to Linux [closed]

  - by wushugene

  Windows 7 seems to install, boot and run much smoother & faster than each the three linux distros I have recently tried (Ubuntu 12.04 unity, Linux mint 13 MATE, and Fedora 17 on gnome 3.4). Why am I facing bad performance in Linux? I have tweaked my Linux installs for the SSD (enabling trim, disabling swap, etc.) I'm using an Acer TravelMate with i5-2410m processor, intel hd 3000 graphics, 8 gigs of ram, and a 256 gb samsung 830 ssd. Edit: Boot times are 10-15 seconds slower, there is noticeable delay from login to fully loaded desktop, and in general does not appear to be as responsive as my old windows 7 install or the Linux guests I had running on it.

  Read the article

• Will my RAID0 stay intact when I move it to a new computer?

  - by Jeremy H

  My primary drive is a 250GB WD SATA drive. So, I added 2x 500GB 7,200 RPM WD SATA drives into my Windows Vista box and created a 1TB RAID0. I then formatted the the primary drive and installed Windows 7. To my pleasant surprise when I booted into Windows 7 my RAID0 was still intact and I kept trotting along the same as I did before. Now I am replacing my motherboard, processor, and RAM and plan on formatting the primary 250GB drive again and using it to boot for a new clean install of Windows 7. My question is: if I move these two SATA drives which are setup for RAID0 into the new system, install Windows 7 again, will the RAID0 remain? Edit: Software RAID. I created it within Windows. The RAID0 does NOT contain the system boot partition.

  Read the article

• Can the onborad LAN cause computer shutdown

  - by user1146320

  I have P4 processor with nvidia card. Now if i don't connect to internet then my computer stays on for as much i can like 4-5 days. But if i plug in the ethernet wire. Do some surfing and leave computer as it is. Then computer fails. I mean The display on screen gets off Looks like something stopping the power supply to Harddisk. But motherboard stays on , FAN is still running , i can eject CD drive as well. But no display on monitor. I have to turn off and then turn on again. I tried formatting windows XP but again same problem

  Read the article

• Force Windows 8 Metro apps to run lower resolutions below 1024x768?

  - by piokuc

  I have installed Windows 8 Consumer Preview on my Samsung NB30 netbook. I was very excited to try it on this little box cause it has a touchscreen and Windows 8 is supposed to be optimized for touchscreen devices. The installation was quick and smooth and all the drivers seem to work well including the one for the touchscreen. There is one major problem, though: when I try to tap one of the tiles on the Metro UI it displays This app can't open. The screen resolution is too low for this app to run. The machine has Intel Atom N450 processor and Intel GMA 3159 integrated graphics card and has maximum resolution 1024x600. I've read that Metro requires at least 1024x768. Is there a solution to this problem? Is there a way to force Windows 8 Metro apps to run in lower resolutions?

  Read the article

• How to Track CPU and Memory Usage Per Process

  - by Mjsk

  I have seen this question asked on here before but was unable to follow the answer which was given. I would like to monitor a processes CPU, Memory, and possibly GPU usage over a given time. The data would be useful if presented in a graph. It would be nice if I could do this using Performance Monitor, but I am open to alternative solutions as well. I have tried using Performance Monitor and my problem is that I'm not sure which performance counters to use since there are so many. I've been looking at a Process, Processor, Memory, etc. but I'm not sure which counters within those categories will be of interest to me. My OS is Windows 7.

  Read the article

• Windows 7 install crashes

  - by Alan Whitelaw

  I have a strange case that I cannot install windows 7 or windows vista on my 3 year old PC. The machine is an MSI K9NGM, with an AMD AM2 processor. I have bought a new Samsung SATA drive to install Windows 7 on, so as to preserve my existing XP install which I intend to dual boot in the future. However about half way through either a vista or w7 install (just after the mouse is shown for the first time, after the first restart) the machine will crash with a blue screen. I have removed, reordered the memory in the machine, with no luck. Does anyone have any experience of why this would happen with BOTH vista and w7 when everything is fine with XP?

  Read the article

• KVM vs Hyper-V. Which hypervisor is best for windows guests?

  - by user198851

  I am currently testing openstack for windows guests (XP and 7). I have deployed openstack "all in one" on system with following specs Processor corei5. (4 physical cores and 8 Threads with HT Technology) RAM 8 GB. HD 500 GB. I have created 4 windows xp guests with 512MB RAM and 1VCPU. On each windows guest i have installed visual studio 2008 only. In nova.conf CPU Over-Commit ratio is 2 for better performance (as mentioned in openstack operation guide). Using KVM as hyerpvisor. I have observed poor performance when simultaneously using visual studio in four windows instances. How i can improve performance ? Should i use KVM or Hyper-V ? or any other suggestion ?

  Read the article

• what to use instead of laptop-mode?

  - by playcat

  hello, i have ubuntu 10.10 64bit on hp 6735s (turion processor). it overheats, and i'm forced to use turion power control in order to keep core temperature to a reasonable level. one more measure that i use is putting my processors to conservative mode. that way, i'm perfectly happy with its performance, and heat is where it should be. however, after my latest upgrade, something happened - cores are back to ondemand by default, and i'm not sure if turionpowercontrol is working any more (ps axu | grep urion shows no process). in addition, i read somewhere that laptop-mode uses hdd spindown for preserving data/energy, and that hdds have only a limited amount of those spindowns, so laptop-mode usage can actually shorten the life of my hdd. i'm wondering if there is a good way to set my cores to automatically go to conservative mode? also, what's the good way to see what is the voltage my cores use? on windows i use cpuz tools. thx and sorry for the long explanation.

  Read the article

• Windows 7 slowing down during hard drive activity

  - by Iniquities of evil men

  Sometimes when normally using my PC, it will (seemingly) randomly slow down, and maybe sometimes even freeze for several seconds. During this slow down period, it looks like a (I don't know which drive it is) hard drive is constantly being written to. During the last slow down, I started Windows's Ressource Monitor and found out that the System process was writing up to 10MB/s to a drive (I suspect it's the system drive, C:\, but I don't know for sure). I'm not doing anything unusual (at least, I don't think I am), and most of the time, it will work normally, but, as I said, it just randomly slows down for some times. Any ideas on what might be causing this and how I can prevent this from happening again? (I have a triple-core processor and 4GB of RAM. My system drive is a WD Caviar Black 500GB, my secondary, 'data' drive is a Samsung drive, which I don't know the model number of, but I can look it up. I can also post my full PC specs if needed.)

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >