Search Results

Search found 9988 results on 400 pages for 'tv less in jersey'.

Page 97/400 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

  • Power cycles on/off 3 times before booting properly from cold start, no other issues (New System)

    - by James
    Relevant Specs: Sapphire 5850, core i7 920, Seasonic x750 power supply, ECS X58B-A2 mobo. From a cold boot, meaning all power totally disconnected at the wall, the system will power on for less than a second and then power off completely. After two seconds of being powered off this will repeat and on the third "attempt" the computer will boot. To be very specific here is what happens: The power is turned on at the wall and on the psu, the orange stdby LED on the mobo is illuminated but the system is 'off'. I hit the power button on the case or on the mobo itself I hear the relay (?) in the psu closing The case light comes on and the mobo power light comes on. The fans start rotating. Immediately after this the I hear some relay click - the power lights extinguish, the fans stop, the stdby light remains on. Less than 2 seconds pass and the cycle repeats without any intervention from me. On the third attempt it boots normally and the machine runs perfectly. If I do a soft reboot or a full shutdown the computer starts normally the next time. It's only if I pull the power cord or flick the switch off on the PSU that I get the cycling again. Basically any time the stdby light on the mobo goes out. I have removed the graphics card and I get the same problem. I have removed the PSU, hotwired it to the ON position and verified voltages on all lines. The relay does not cycle when I do this. If I connect only the 24 pin ATX connector to the mobo and not the 8 pin ATX12V / CPU connector then I will not get the cycling, the fans run, the power light stays on, but obviously the system can't boot. Disconnecting all fans has no effect on the problem. My feeling it that it's something to do with the motherboard like a capacitor that's taking a long time to charge because it's leaking or something along those lines. But I can't imagine what could be 'wrong' with it and only manifest itself as a problem under these very specific circumstances. Any ideas? Thanks.

    Read the article

  • Options for PCI-DSS 11.5 - Deploy file integrity monitoring software

    - by dialt0ne
    I'm looking for options to be compliant with PCI-DSS section 11.5 for some servers I manage at the datacenter. There are several servers (less than 20) and they are mostly CentOS5, but there are some RHEL4 and Solaris9 Sparc. I believe Tripwire, Inc. is the leader in this area, but I am looking for additional options, both commercial and FOSS. Please include your experience reasons for using the software you recommend.

    Read the article

  • Terminal Server/Citrix XenApp alternative?

    - by Atlas
    Is there something less costly than Citrix XenApp and something better than Windows TS? The industry seems to be dominated by citrix. I'm currently using Windows 2000 Server Terminal Server, but now I have to switch to something better because of performance/color issues. I'm faced with 2 options: 1) Upgrade to Windows 2008 Server + TS (now has App publishing i think?) 2) Get Citrix XenApp Any suggestions or anything I'm not aware of? Cheers

    Read the article

  • ISA Server 2006 SP1 :: Allow unauthenticated users (non domain users) access to external (internet)

    - by Klaptrap
    Now that we have applied an internal to external rule blocking all users access to the internet, other than those users in a whitelist, we have the obvious issue of non authenticated users, not on our domain, i.e.; domain-less guests not being able to access the internet. Other than configuring each machine to use our alternative gateway - which would require a member of IT to be onsite everytime a guest arrives - can this be done through ISA adn AD?

    Read the article

  • Disassemble Asus A2500H

    - by Stijn Sanders
    I have an aged Asus A2500H notebook, with a broken screen and damage to the outside. Since it has a TV-out connection, and is working good otherwise, I have it hooked up to my television as a kind of media-center to play video over LAN. I want to remove the screen as cleanly as possible, but am having trouble opening up the laptop. I've been able to remove the (broken) hinges the screen pivots on. I've also removed any other screws I could spot, but still the casing doesn't come off and seems to be attached by yet more screws I can't access (yet). I've been searching the web for disassemble instructions, I've found some for a number of other brands and models, but not for the Asus A2500H.

    Read the article

  • Throttle network bandwidth per application in Mac OS X

    - by Kio Dane
    I notice that iTunes seems to suck up all my bandwidth and doesn’t play nice with other applications that use the web when it's downloading. In fact, it doesn't even give itself enough bandwidth when browsing the iTunes Store while downloading large or many files (podcasts, TV shows, large apps, etc). I'm not concerned with getting all my downloads as soon as possible, they're really low priority, and I'd rather not have to do this while I'm awake, but I can't hit the refresh button if I'm in bed and forgot it already. Is there an application or tool via the Terminal to limit the download bandwidth that iTunes gets without also hindering web browsers or other applications? FOSS/GPL software is preferable, but pay software might be acceptable too.

    Read the article

  • So you're a new sysadmin...

    - by 80bower
    I've recently taken over management of a Windows 2003 Small Business server and network for a small, less than ten person company. I have some (antiquated) sysadmin experience, but I've little experience with Exchange. The documentation of the existing infrastructure leaves much to be desired, and I was wondering if there's any sort of "So you've just become sysadmin" guides that anyone could recommend.

    Read the article

  • Play Halo on the Xbox360 Arcade

    - by Jeremy Rudd
    I'm looking at purchasing a Xbox360 because I've wanted to catch up with the Halo trilogy. Does the cheap Arcade edition console support Halo 2 Halo 3? Halo Wars? Would I be able to save my game progress in single player? Would I be able to play online in typical maps? General questions: Would I be able to play games using the DVD drive or do I have to download everything? Does the tiny HDD hurt even if I don't download any games, trailers or music? Are there any other differences in comparison to the Xbox360 Pro? I have a regular TV that uses the composite cable, so I don't need the HDTV support in the Pro edition.

    Read the article

  • "Input not Supported" on external monitor

    - by Shalan
    when it rains, it pours! Im helping a friend with his Dell Inspiron 1520. The hdd crashed and and top of that, the screen is cracked. I've replaced the hdd (SATA-5400), but the lcd replacement is only comin in a months time. I've tried to: hook the laptop up to an Acer 18.5" lcd monitor via VGA, boot up into Windows 7 installer, get to the Step-1 screen, Switch to external display (Function-F8) ...and get the "Input not supported" message on the Acer lcd. I know that this is a resolution problem, but cant for the life of me figure out how to solve this. I've also tried, hooking it up to my TV via Composite cables (got a VGA-Composite adaptor). Please could someone advise me what to do? -Thank u!

    Read the article

  • ISA Server 2006 SP1 :: Allow unauthenticated users (non domain users) access to external (internet)

    - by Klaptrap
    Now that we have applied an internal to external rule blocking all users access to the internet, other than those users in a whitelist, we have the obvious issue of non authenticated users, not on our domain, i.e.; domain-less guests not being able to access the internet. Other than configuring each machine to use our alternative gateway - which would require a member of IT to be onsite everytime a guest arrives - can this be done through ISA adn AD?

    Read the article

  • Way to avoid ssh connection timeout & freezing of terminal tab

    - by Tchalvak
    When I connect via ssh terminal to certain servers, it timeouts and "freezes" the terminal (doesn't accept, doesn't disconnect, can't Ctrl-C to kill the ssh process or anything). This is in Ubuntu's Gnome-terminal, though it seems to be pausing the terminal input/output, and doesn't affect the operation of the Gnome-terminal software itself. so less a bug with gnome-terminal than an annoying inconsistency with ssh. So is there a way to prevent regain the terminal from ssh connections that have timed out?

    Read the article

  • which package i should choose, if i want to install virtualenv for python?

    - by hugemeow
    pip search just returns so many matches, i am confused about which package i should choose to install .. should i only install virtualenv? or i'd better also install virtualenv-commands and virtualenv-commands, etc, but i really don't know exactly what virtualenv-commands is ... mirror0@lab:~$ pip search virtualenv virtualenvwrapper - Enhancements to virtualenv virtualenv - Virtual Python Environment builder veh - virtualenv for hg pyutilib.virtualenv - PyUtilib utility for building custom virtualenv bootstrap scripts. envbuilder - A package for automatic generation of virtualenvs virtstrap-core - A bootstrapping mechanism for virtualenv+pip and shell scripts tox - virtualenv-based automation of test activities virtualenvwrapper-win - Port of Doug Hellmann's virtualenvwrapper to Windows batch scripts everyapp.bootstrap - Enhanced virtualenv bootstrap script creation. orb - pip/virtualenv shell script wrapper monupco-virtualenv-python - monupco.com registration agent for stand-alone Python virtualenv applications virtualenvwrapper-powershell - Enhancements to virtualenv (for Windows). A clone of Doug Hellmann's virtualenvwrapper RVirtualEnv - relocatable python virtual environment virtualenv-clone - script to clone virtualenvs. virtualenvcontext - switch virtualenvs with a python context manager lessrb - Wrapper for ruby less so that it's in a virtualenv. carton - make self-extracting virtualenvs virtualenv5 - Virtual Python 3 Environment builder clever-alexis - Clever redhead girl that builds and packs Python project with Virtualenv into rpm, deb, etc. kforgeinstall - Virtualenv bootstrap script for KForge pypyenv - Install PyPy in virtualenv virtualenv-distribute - Virtual Python Environment builder virtualenvwrapper.project - virtualenvwrapper plugin to manage a project work directory virtualenv-commands - Additional commands for virtualenv. rjm.recipe.venv - zc.buildout recipe to turn the entire buildout tree into a virtualenv virtualenvwrapper.bitbucket - virtualenvwrapper plugin to manage a project work directory based on a BitBucket repository tg_bootstrap - Bootstrap a TurboGears app in a VirtualEnv django-env - Automaticly manages virtualenv for django project virtual-node - Install node.js into your virtualenv django-environment - A plugin for virtualenvwrapper that makes setting up and creating new Django environments easier. vip - vip is a simple library that makes your python aware of existing virtualenv underneath. virtualenvwrapper.django - virtualenvwrapper plugin to create a Django project work directory terrarium - Package and ship relocatable python virtualenvs venv_dependencies - Easy to install any dependencies in a virtualenviroment(without making symlinks by hand and etc...) virtualenv-sh - Convenient shell interface to virtualenv virtualenvwrapper.github - Plugin for virtualenvwrapper to automatically create projects based on github repositories. virtualenvwrapper.configvar - Plugin for virtualenvwrapper to automatically export config vars found in your project level .env file. virtualenvwrapper-emacs-desktop - virtualenvwrapper plugin to control emacs desktop mode bootstrapper - Bootstrap Python projects with virtualenv and pip. virtualenv3 - Obsolete fork of virtualenv isotoma.depends.zope2_13_8 - Running zope in a virtualenv virtual-less - Install lessc into your virtualenv virtualenvwrapper.tmpenv - Temporary virtualenvs are automatically deleted when deactivated isotoma.plone.heroku - Tooling for running Plone on heroku in a virtualenv gae-virtualenv - Using virtualenv with zipimport on Google App Engine pinvenv - VirtualEnv plugins for pin isotoma.depends.plone4_1 - Running plone in a virtualenv virtualenv-tools - A set of tools for virtualenv virtualenvwrapper.npm - Plugin for virtualenvwrapper to automatically encapsulate inside the virtual environment any npm installed globaly when the venv is activated d51.django.virtualenv.test_runner - Simple package for running isolated Django tests from within virtualenv difio-virtualenv-python - Difio registration agent for stand-alone Python virtualenv applications VirtualEnvManager - A package to manage various virtual environments. virtualenvwrapper.gem - Plugin for virtualenvwrapper to automatically encapsulate inside the virtual environment any gems installed when the venv is activated

    Read the article

  • Use IPtables or null route for blacklisting about 1 million IP addresses?

    - by tylerl
    I've come across a situation where a client needs to blacklist a set of just under 1 million individual IP addresses (no subnets), and network performance is a concern. While I would conjecture that IPTables rules would have less of a performance impact than routes, that's just conjecture. Does anyone have any solid evidence or other justification for favoring either IPTables or null routing as solution for blacklisting long lists of IP addresses? In this case everything is automated, so ease-of-use isn't really a concern.

    Read the article

  • ssh: "Agent admitted failure to sign using the key"

    - by takeshin
    I'm trying to set up password-less login with ssh on Ubuntu Server, but I keep getting: Agent admitted failure to sign using the key and prompt for password. I have generated new rsa keys. Before the system reboot it worked just fine. All the links lead me to this bug, but nothing works. SSH Agent is still not running. How to fix that? Maybe the files need specific permissions?

    Read the article

  • Best Laptop for Student?

    - by George Stocker
    I'm looking for a laptop to buy that meets the following criteria: Company with good warranty and Technical support/Customer Service Less than $1000 for laptop. Laptop does not need to be a powerhouse, but it needs to have good bang for the buck (Not a celeron processor, at least 2GB memory, etc) Laptop will be used for school related activities (Homework, classwork, general computer usage). This laptop is for a friend of mine, a new college student.

    Read the article

  • Virtualhost pulling from the same site??

    - by Matt
    I have my httpd.conf on fedora 8 that I am setting the virtual host file. Here is what I have: DocumentRoot "/var/www/html" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> then below I am trying to setup a vhost to have multiple sites on the server: NameVirtualHost *:80 <VirtualHost *:80> ServerName kadence.tv DocumentRoot /var/www/html/ </VirtualHost> <VirtualHost *:80> ServerName nacc.biz DocumentRoot /var/www/html/nacc/ </VirtualHost> also in the /var/www/html/ directory I have the index.php file for the kadence site...when I do to either site I get the index for the kadence site...any ideas what I am doing wrong EDIT the full contents of my httpd configuration file are here.

    Read the article

  • Build a RAID-5 USB Array or NAS?

    - by TK Kocheran
    I'm looking to build a RAID-5 or RAID-6 hard disk array to be used as a centralized backup location for my home network. I have a lot of 4-8GB DVD ISO files which I intend to serve over the network to my TV using DLNA or something similar. I need decent write times, fast read times, and preferably a way to connect this array to my network router over USB. I'll probably be using ext3/4 on it (I'd use btrfs if my router supported it :-[). Is there a way to build a RAID array that is accessible over USB? I'm kind of new to this and most guides assume you're running a RAID array inside your machine. I need at least 5TB of space, and I need redundancy, so I prefer RAID-6. How can I go about accomplishing this?

    Read the article

  • Smart card / auditable access for rack KVM tray

    - by Mark Henderson
    Is there such a thing as a KVM Tray for a standard 19" rack whose use can be validated by a smartcard (or some other auditable authentication method)? It looks like we have a security requirement where just because users have a key to the rack doesn't mean they will be allowed to use the console inside the rack, and rather than just lock the console (and keep track of who has keys), we would prefer to be able to audit the actual user that was attached at the KVM. (It's worth mentioning that I'm aware of the Raritan devices, but they surely can't be the only ones) (If these things existed, I don't think half of the tratoirs that somehow manage to infiltrate CTU on the TV show 24 would ever get away with anything)

    Read the article

  • If Nvidia Shield can stream a game via WiFi (~150-300Mbps), where is the 1-10Gbps wired streaming?

    - by Enigma
    Facts: It is surprising and uncharacteristic that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. 150-300mbps WiFi is in no way superior to a 1000mbps+ LAN connection aside from well wireless mobility. Throughout time, (since the internet was created) wired services have **always come first yet in this particular case, the opposite seems to be true. We had wired internet first, wired audio streaming, and wired video streaming all before their wireless counterparts. Why? Largely because the wireless bandwidth was and is inferior. Even today despite being significantly better and capable of a lot more, it is still inferior to a wired connection. Situation: Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable to me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. While this secondary project will provide a wired connection, it still shouldn't be necessary to purchase a Shield to have this benefit. Not only this but Intel's WiDi claims game streaming support as well - wirelessly. Where is the wired streaming? All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I should be able to stream to my second desktop or my laptop both of which by hardware comparison are superior to the Shield. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? Reiteration of questions: Is there a technical reason (non marketing) for why Nvidia opted to bottleneck the streaming service with a wireless connection limiting the resolution to 720p and introducing intermittent video choppiness when on a wired connection one could achieve, presumably, 1080p with significantly less or zero choppiness? Is there anything limiting developers from creating a PC/Desktop application emulating the same H.264 decoding functionality that circumvents the need to get an Nvidia Shield altogether? (It is not a matter of being too cheap to support Nvidia - I have many Nvidia cards that aren't being used. One should not have to purchase specialty hardware when = hardware already exists) Same questions go for Intel Widi also. I am just utterly perplexed that there are wireless live streaming solution and yet no wired. How on earth can wireless be the goto transmission medium? Is there another solution that takes advantage of H.264 video compression allowing live streaming over a wired connection? (*) - Perhaps this isn't the first but afaik it is the first complete package. (**) - I cant back that up with hard evidence/links but someone probably could. Edit: Maybe this will be the solution I am looking for but I still find it hard to believe that they would be the first and after wireless solutions already exist. In-home Streaming You can play all your Windows and Mac games on your SteamOS machine, too. Just turn on your existing computer and run Steam as you always have - then your SteamOS machine can stream those games over your home network straight to your TV! - http://store.steampowered.com/livingroom/SteamOS/

    Read the article

  • How can I setup a subnetwork using DDWRT and a 2Wire?

    - by MadBurn
    Ok, I'm having a bit of trouble getting this setup. I'm not really sure what direction I need to be looking in. I am on ATT UVerse and I have to use their horrible 2Wire Modem/Router. But with this router, I have very limited control over my network and my wifi range is too small for my house. But, I have a hardwire ran to my TV which I have hooked into a switch and split the line to my PS3. The problem I'm having, is I don't know how to get the Buffalo DD-WRT setup as a subnetwork so that the PS3 can find my Media Server. Here is a diagram of what I'm trying to accomplish: Blue is ethernet.

    Read the article

  • Windows 7 Boot Screen Resolution/Aspect Ratio

    - by Joe
    I have been using my Windows 7 PC with my 46" Samsung HDTV with 1920x1080 resolution. The boot screen seems to always be at 1024x768 resolution and the aspect ratio doesn't match the 1080p ratio. I read on a msdn blog that microsoft only made the boot screen in one type of resolution so that cannot be changed. The result is that on my TV the boot screen seems to look stretched out. Is there a way to make change the aspect ratio or crop it in someway? Is there any method at all to make it look normal or just better without being stretchy looking?

    Read the article

  • What is a reasonable range for signal strength when next to my router?

    - by Jeff
    I know that these things depend largely on specific hardware but I don't even know if I am in the neighborhood. What would a reasonable range of signal strength be when my device is less than 5 feet from my router? House3 is my main router at 61% strength and that seems very low! Repeater is my... repeater which is 50' away in the next room. I'm not terribly concerned with the Repeater until I get my main router settled.

    Read the article

  • DI-524UP will become deadly slow when downloading torrents

    - by abolotnov
    I have a DI-524UP router that shares internet to two notebooks at home via wireless and a desktop via wired collection. It will become barely available/pingable via wireless when I download torrents on a desktop computer. Even when I limit download speed to 20% or less of available bandwidth - it must be something else, not the speed that causes the issue. I've tried limiting number of active connections and stuff but it will still not cure. Is there anything I can do about this?

    Read the article

  • Transcript creator OR Speech to text

    - by AndyMcKenna
    I listen to a daily podcast that is about 4 hours long. I think it would be a cool project if I could come with some way to generate transcripts of it automatically. Is there any software that will "listen" to the mp3s and create text of what they are saying? I'm not very concerned with differentiating who is talking because I think that would be asking too much. There are 4 main people speaking and others less often.

    Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >