Search Results

Search found 35142 results on 1406 pages for 'latest version'.

Page 979/1406 | < Previous Page | 975 976 977 978 979 980 981 982 983 984 985 986  | Next Page >

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• Visual WebGui helps Dawsons put its Windows Forms HR system on the web

  - by Webgui

  Dawsons needed to upgrade their existing Windows Forms LAN human resources system to allow better and flexible access to the ever increasing data size as labor hire clients are demanding easy access to copies of tickets and licenses and etc. The company has some 30,000 applicants on file, but access to this data has been complex and limited with the current system. Therefore the IT department was asked to find a possible solutions that would allow creating a web based application while utilizing as much of the existing Windows Forms code as possible. Visual WebGui was found to be highly regarded in many frameworks comparisons so the team decided to give Visual WebGui a try. It didn’t take long for them to recognize that the Visual WebGui controls appear and react over the web the same as desktop controls. This and the fact that most of the code was directly ported which saved Dawsons hundreds of development hours are what make Visual WebGui so unique and productive. “My first impression of Visual WebGui was perhaps disbelief. Not being a seasoned Web programmer, I initially found it hard to accept so much functionality from a web based application. Also, the speed is exceptional” said John Sainsbury, Financial Controller of the Dawsons Group who added “Since working with Visual WebGui, I have showcased parts of the application to our major clients, some of whom use SAP portals, and they are amazed.” The result was so satisfying that the company is now looking to produce a mobile version for accessing the labor pool on the go. “By removing the barriers of the local network, Visual WebGui has changed how we can do business” said Lloyd Everist, General Manager Dawsons Group. Read more about this story

  Read the article

• Keep it Professional &ndash; Multiple Environments

  - by AjarnMark

  I have certainly been reading blogs a whole lot more than writing them the last several weeks, and it’s about time I got back to writing.  I have been collecting several topics and references for blog posts…some of which will probably just never get written as the timeliness of the topics fade over time.  Nonetheless, I’m back, and I think it is time to revive my Doing Business Right series, this time coming from the slant of managing a development team rather than the previous angle of being self-employed.  First up: separating Dev, Test, and Prod. A few months ago, Colin Stasiuk (@BenchmarkIT) wrote a great post about separating your Dev, Test/UAT, and Prod environments.  This post covers all the important points such as removing Developer access from both PROD and UAT, and the importance of proper deployment (a.k.a. promotion) procedures.  I won’t repeat it all here, go read the original!  But what I do want to address is what I believe to be the #1 excuse people use for not having separate environments:  Money.  I discussed this briefly in my comment on Colin’s post at the time, but let me repeat it here and expand on it a bit. Don’t let the size of your company or the size of its budget dictate whether you do things professionally or not.  I am convinced that most developers and development teams would agree that it is a best practice to have separate environments for development, testing, and production (a.k.a. Live).  So why don’t they?  Because they think that it means separate servers which means more money.  While having separate physical servers for the different environments would be ideal, it is not an absolute requirement in order to make this work.  Here are a few ideas: Use multiple instances of SQL Server and multiple Web Sites with Headers or Ports.  For no additional fees* you can install multiple instances of SQL Server on the same machine.  This gives you a nice separation, allowing you to even use the same database names as will appear in PROD, yet isolating the data and security access.  And in IIS, you can create multiple Web Sites on the same server just by using Host Headers or different port numbers to separate them.  This approach does still pose the risk of non-Prod environments impacting performance on Prod, but when your application is busy enough for that to be a concern, you can probably afford one of the other options. Use desktop PCs instead of servers.  Instead of investing in full server-grade hardware, you can mimic the separate environments on old desktop PCs and at least get functional equivalency, if not performance matching.  The last I checked, Microsoft did not require separate licensing for SQL Server if that installation was used exclusively for dev or test purposes*.  There may be some version or performance differences between this approach and what you have in Prod, but you have isolated test from impacting Prod resources this way. Virtualization.  This is of course one of the hot topics of the day, and I would be remiss if I did not suggest this.  It is quite easy these days to setup virtual machines so that, again, your environments are fairly isolated from one another, and you retain all the security and procedural benefits of having separate environments. So the point is, keep your high professional standards intact.  You don’t need to compromise on using proper procedure just because you work in a small company with a small budget.  Keep doing things the right way! By the way, where I work, our DEV environment is not on a server.  All development is done on the developer’s individual workstation where it can be isolated from other developers’ work for the duration of writing the code, but also where the developers have to reconcile (merge) differences in code under concurrent development.  This usually means that each change is executed multiple times (once per developer to update their environments with the latest changes from others) giving us an extra, informal. test deployment before even going to the Test/UAT server.  It also means that if the network goes down, the developers can continue to hum along because they are not dependent on networked resources.  In fact, they will likely be even more productive because they aren’t being interrupted by email…but that’s another post I need to write. * I am not a lawyer, nor a licensing specialist, but it appeared to be so the last time I checked.  When in doubt, consult an expert on the topic.

  Read the article

• RUEI 12.1.0.3.0 dependency requirement for php-soap-5.1.6

  - by sthieme

  Dear Readers,please be aware of the new php-soap-5.1.6 dependency in RUEI 12.1.0.3.For a swift upgrade to RUEI 12.1.0.3 you should be aware of this pre-requisite as it can be a time-eater to obtain individual rpm-packages inside of a datacenter for an old OS revision once you have started the upgrade process. You may use the following procedure to retrieve the required package via http://public-yum.oracle.com:Customers will have to check the /etc/issue, /etc/issue.net (or /etc/redhat-release for RHEL based OS) for their current release in order to obtain the fitting package version.Customers of OEL can download the packages from our public-yum.oracle.com Server: http://public-yum.oracle.com/repo/,  e.g. http://public-yum.oracle.com/repo/OracleLinux/OL5/8/base/x86_64/php-soap-5.1.6-32.el5.x86_64.rpmEarlier releases (up to 5.5) are located under the EnterpriseLinux instead of OracleLinux path, e.g.http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/5/base/x86_64/php-soap-5.1.6-27.el5.x86_64.rpmNote: you will have to obtain the relevant RedHat rpm-packages via the login protected RHN URLs. Oracle can only provide support for Oracle Enterprise Linux and RHEL packages are not available publicly via rpm-seek.com to my knowledge. Kind regards,Stefan

  Read the article

• Ubuntu 12.04 taking too much time to boot

  - by adarshdinesh

  Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

  Read the article

• "cannot open file system. File system seems damaged "

  - by suresh kadiri

  I was using windows 7 till yesterday. I tried to install ubuntu 14. 04 Lts version yesterday with in windows 7. But it was not succeeded. Then I decided to install ubuntu only. By mistake I installed ubuntu in whole disk. After that to get deleted partitions I installed testdisk. I also used deeper search option. Now I'm getting "file system damaged". It shows The hard disk (320GB /298 GiB) seems to small! (<473 GB /441 GB) Check the Harddisk size: HD Jumpers setings, BIOS detection... The following partitions can't be recovered: Partition start end size in sectrors Linux 19077 177 45 57604 81 13 618930716 Linux 19080 192 57 57607 96 25 618930716 With ubcd also I used testdisk option. Same result comes."cannot open file system. File system seems damaged ". I have all my stuff in hard disk. Please help me to get recover my files in deleted partitions.

  Read the article

• Project Corndog: Viva el caliente perro!

  - by Matt Christian

  During one of my last semesters in college we were required to take a class call Computer Graphics which tried (quite unsuccessfully) to teach us a combination of mathematics, OpenGL, and 3D rendering techniques.  The class itself was horrible, but one little gem of an idea came out of it.  See, the final project in the class was to team up and create some kind of demo or game using techniques we learned in class.  My friend Paul and I teamed up and developed a top down shooter that, given the stringent timeline, was much less of a game and much more of 3D objects floating around a screen. The idea itself however I found clever and unique and decided it was time to spend some time developing a proper version of our idea.  Project Corndog as it is tentatively named, pits you as a freshly fried corndog who broke free from the shackles of fair food slavery in a quest to escape the state fair you were born in.  Obviously it's quite a serious game with undertones of racial prejudice, immoral practices, and cheap food sold at high prices. The game itself is a top down shooter in the style of 1942 (NES).  As a delicious corndog you will have to fight through numerous enemies including hungry babies, carnies, and the corndog serial-killer himself the corndog eating champion!  Other more engaging and frighteningly realistic enemies await as the only thing between you and freedom. Project Corndog is being developed in Visual Studio 2008 with XNA Game Studio 3.1.  It is currently being hosted on Google code and will be made available as an open source engine in the coming months.

  Read the article

• Rip and Convert DVD’s to an ISO Image

  - by Mysticgeek

  If you own a lot of DVD’s, you might want to convert them to an ISO image for backup and easily playing them on your media center. Today we take a look at ripping your discs using DVDFab, then using ImgBurn to create an ISO image of the ripped DVD files. Rip DVD with DVDFab6 DVDFab will remove copy protection and rip the DVD files for free. Other components in the suite require you to purchase a license after the 30 day trial, but you’ll still be able to rip DVD’s after the trial. Install DVDFab by accepting the defaults (link below)…a system restart is required to complete the install process. The first time you run it, a welcome screen is displayed. If you don’t want to see it again check the box Do not show again, then Start DVDFab.  Pop the DVD in your drive and click Next. Now select your region and check Do not show again, then OK. It will then open the DVD and begin to scan it. Under DVD to DVD you can select either Full Disc or Main Movie depending on what you want to rip. If you want to burn the DVD to a disc after it’s created select the Full Disc option. Now click the Start button to begin the ripping process. After the ripping process has completed, you’ll get a message telling you it’s waiting for you to put in a blank DVD. Since we aren’t burning the disc, just cancel the message. Click Finish and close out of DVDFab or just minimize it if you’re going to keep using it to rip another DVD. By default the temporary directory is in My Documents \ DVDFab \ Temp…however you can change it in settings. If you go to the Temp directory you’ll see the DVD files listed there… Convert Files to ISO with ImgBurn Now that we have the files ripped from the DVD, we need to convert them to an ISO image using ImgBurn (link below). Open it up and from the main menu click on Create image file from files/folders. Click on the folder icon to browse to the location of the ripped DVD files. Browse to the DVDFab temp directory and the VIDEO_TS folder for the source and click Ok. Then choose a destination directory, give the ISO a name, and click Save. In this case we ripped the Unbreakable DVD, so named it that.   So now in ImgBurn you have the source being the ripped DVD files, and the destination for the ISO…then click the Build button. If you don’t create a volume label, ImgBurn is kind enough to create on for you. If everything looks correct, click Ok. Now wait while ImgBurn goes through the process of converting the ripped DVD files to an ISO image. The process has successfully completed. The ISO image of the DVD will be in the output directory you selected earlier. Now you can burn the ISO image to a blank DVD or store it on an external hard drive for safe keeping. When you’re done, you’ll probably want to go into the temp DVDFab folder and delete the VOB and other files in the Video_TS folder as they will take up a lot of space on your hard drive.   Conclusion Although this method requires two programs to make an ISO out of a DVD, it’s extremely quick. When burning DVD’s of various lengths, it took less than 30 minutes to get the final ISO. Now, you’ll have your DVD movies backed up in case something were to happen to the discs and are no longer playable. If you use Windows Media Center to watch your movies, check out our article on how to automatically mount and view ISO files in Windows 7 Media Center. With DVDFab, you get a 30 day fully functional trial for all of its features. You’ll still be able rip DVD’s even after the 30 day trial has ended. The more we’ve been using DVDFab, the more impressed we are with its capabilities, so after the 30 day trial you should consider purchasing a license. We will have a full review of the of it to share with you soon.  Download DVDFab Download ImgBurn Similar Articles Productive Geek Tips How To Rip DVDs with VLCCalculate with Qalculate on LinuxConvert a Row to a Column in Excel the Easy WayEnjoy Quick & Easy Unit Conversion with Convert for WindowsConvert Older Excel Documents to Excel 2007 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser

  Read the article

• Should we be able to deploy a single package to the SSIS Catalog?

  - by jamiet

  My buddy Sutha Thiru sent me an email recently asking about my opinion on a particular nuance of the project deployment model in SQL Server Integration Services (SSIS) 2012 and I’d like to share my response as I think it warrants a wider discussion. Sutha asked: Jamie What is your take on this? http://www.mattmasson.com/index.php/2012/07/can-i-deploy-a-single-ssis-package-from-my-project-to-the-ssis-catalog/ Overnight I was talking to Matt who confirmed that they got no plans to change the deployment model. For example if we have following scenrio how do we do deploy? Sprint 1 Pkg1, 2 & 3 has been developed and deployed to UAT. Once signed off its been deployed to Live. Sprint 2 Pkg 4 & 5 been developed. During this time users raised a bug on Pkg2. We want to make the change to Pkg2 and deploy that to UAT and eventually to LIVE without releasing Pkg 4 &5. How do we do it? Matt pointed me to his blog entry which I have seen before . http://www.mattmasson.com/index.php/2012/02/thoughts-on-branching-strategies-for-ssis-projects/ Thanks Sutha My response: Personally, even though I've experienced the exact problem you just outlined, I agree with the current approach. I steadfastly believe that there should not be a way for an unscrupulous developer to slide in a new version of a package under the covers. Deploying .ispac files brings a degree of rigour to your operational processes. Yes, that means that we as SSIS developers are going to have to get better at using source control and branching properly but that is no bad thing in my opinion. Claiming to be proper "developers" is a bit of a cheap claim if we don't even do the fundamentals correctly. I would be interested in the thoughts of others who have used the project deployment model. Do you agree with my point of view? @Jamiet

  Read the article

• w00t! First post!

  - by blaird

  So, I busted my old blog and hadn't been keeping up with it. Decided it would be easier on me to use software that I didn't maintain, so several months ago I signed up for a GWB account. You are a witness to procrastination at its finest!  I was remarking to my friend Abby that I hadn't written anything in ages, that I've typed a bunch in the last 5 years or so, but that the typing belonged to someone else as work product, was boring technical mumbo jumbo, or was only good before it spoiled, that project/job/technology/tweet based freshness window that us geeks have to deal with. In short, I just didn't feel like it. So forgive the rambling sentences and my grammatical failures, you have Abby to thank ;) On the technology front I've been working with WPF, WCF and a whole lot of other alphabet soup in terms of patterns. I'm starting to get spoiled on Visual Studio 2010, and may have made a mistake by evaluating the ultimate version. Because I'm a .NET geek and an outdoor geek, expect a hodgepodge. It's nearly Easter, which for the garden means a whole lot of things. I've already started getting seed out, and started working soil. It feels good to get real dirt on your hands.

  Read the article

• Ubuntu 12.04 does not see windows already install on my computer (dual installation)

  - by jacinta

  I was trying to install the ubuntu 12.4 along side windows 7 on my new HP Pavilion 64k desktop with windows 7 computer but Ubuntu said that ( This computer has no detected operating system) and some one said (I suggest you chkdsk your Windows partition. I also suggest you resize the NTFS in WIndows then install Ubuntu to the free space.) Therefore I did (To shrink a simple or spanned volume using the Windows interface In Disk Management, right-click the simple or spanned volume you want to shrink. Click Shrink Volume…. Follow the instructions on your screen.) Then When I try to install ubuntu 12.4 after doing this, I received the same error. I was going to undo what I did but I see that I lose 1g when I do that so now what do I do? it says I can do a new simple volume and maybe then the space will no longer be unallocated. Please help me. I think I have a bad cd (ubuntu 12.4) cause from my research I see that I am not suppose to get a screen saying that (The computer has no detected operating system) I think this is a bad cd and I hope I did not mess up my computer. Please help. .................................................................................... O k I think I am following what you said about how to edit my question irrational john. I did chkdsk as you and actionparsnip (andrew-woodhead666) told me to AND ALSO did a lot of other things before I found out how to chkdsk. No problems. Thank you. Then I put back the space (extended) I took from system. I still was only able to put back 15 and not 16 so it is up to 99mb not back to 100mb. Then I shrank HP (C) as you told me, to 10 13,240 mb which is (12.93gb Unallocated). I did not change it into NTSF by doing the (New Simple Volume Action) I just left it. Then I tried to install UBUNTU 12.04 live CD amd64 and it gave me the results it was sometimes giving me before which is result (THAT Ubuntu) does not tell me weather I have or have not an already installed windows7. It just goes to a window that would have showed me information on what I have and on the bottom (DEVICE FOR BOOT LOADER INSTALLATION /dev/sda ) and the option to go BACK, QUIT, or INSTALL. (I think it is the INSTALLATION TYPE window). Therefore I do what I have been doing and I QUIT. What do I do now? Sorry that it seems like I cannot do anything on my own. On the Youtube video how to install ubuntu dual-boot alongside windows UBUNTU is installed so easy. The installation option page gives 3 options including dual instillation and the disk even lets you use a slider to slide to the size of the partition size you want. Yet my UBUNTU live cd is a mess and I checked it as one of you guys told me and got back information that it is good. Oh well this guy says you should press a control key to tell which device you are using to install ubuntu before the screen comes up. I guess cause it is old. This page also shows you easy stuff that do not show up on my cd. how to dual-boot UBUNTU and windows 7 P.S.. I saw this on the windows 7 website windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions CREATE A BOOT PARTITION I HAD TO LEAVE OUT THE HTTP STUFF CAUSE I AM ONLY ALLOWED 2 ON A PAGE IT SAID To create a boot partition Warning Warning If you are installing different versions of Windows, you must install the earliest version first. If you don't do this, your computer may become inoperable. Open Computer Management by clicking the Start button Picture of the Start button, clicking Control Panel, clicking System and Security, clicking Administrative Tools, and then double-clicking Computer Management.? Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation. In the left pane, under Storage, click Disk Management. Right-click an unallocated region on your hard disk, and then click New Simple Volume. In the New Simple Volume Wizard, click Next. Type the size of the volume you want to create in megabytes (MB) or accept the maximum default size, and then click Next. Accept the default drive letter or choose a different drive letter to identify the volume, and then click Next. In the Format Partition dialog box, do one of the following: If you don't want to format the volume right now, click Do not format this volume, and then click Next. To format the volume with the default settings, click Next. For more information about formatting, see Formatting disks and drives: frequently asked questions. Review your choices, and then click Finish. AND THIS ON ANOTHER PAGE. Formatting disks and drives: frequently asked questions Hard disks, the primary storage devices on your computer, need to be formatted before you can use them. When you format a disk, you configure it with a file system so that Windows can store information on the disk. Hard disks in new computers running Windows are already formatted. If you buy an additional hard disk to expand the storage of your computer, you might need to format it. Storage devices such as USB flash drives and flash memory cards usually come preformatted by the manufacturer, so you probably won't need to format them. CDs and DVDs, on the other hand, use different formats from hard disks and removable storage devices. For information about formatting CDs and DVDs, see Which CD or DVD format should I use? Warning Warning Formatting erases any existing files on a hard disk. If you format a hard disk that has files on it, the files will be deleted. WHAT I DID WAS I GOT TO COMPUTER MANAGEMENT SECTION THEN I CLICKED ON DRIVE HP(C) (it put stripes on to show it is selected) Then I click on ACTION selected ALL TASKS AND THEN selected SHRINK VOLUME and then chose how much space from what it was giving me that I wanted. (12.93gb) AND THAT WAS ALL I DID. THEN I TRIED TO INSTALL UBUNTU i NEVER GOT THE 3RD SCREEN THAT IS IN THE VIDEO I INCLUDED (THE YOUTUBE WITH THE ENGLISH GUY) INSTALLATION TYPE I ALSO DID NOT GET THE 4TH SCREEN THAT ALLOWS YOU TO SELECT PARTITION SIZE what i got next was the 2nd INSTILLATION TYPE window shown on the (LINUX BS DOS.COM) PAGE THAT I INCLUDED and it showed no information about any drives (no drives /partition or stuff was shown) only the Boot Loader statement and the dev/sda bar and that's why i did not press install but chose to QUIT. SORRY I JUST NOW SAW YOUR ANSWER IRRATIONAL JOHN. I SHRANK HP(C) BY 12.93GB MY UNALLOCATED SPACE IS NOW 12.93GB HP(C) = 907.17gb NTSF...YOU ARE CORRECT WITH EVERYTHING YOU SAID This is what i read on (http://)windows.microsoft.com/en-US/windows7/Create-a-boot-partition I am only allowed 2 links Create a boot partition You must be logged on as an administrator to perform these steps. A boot partition is a partition that contains the files for the Windows operating system. If you want to install a second operating system on your computer (called a dual-boot or multiboot configuration), you need to create another partition on the hard disk, and then install the additional operating system on the new partition. Your hard disk would then have one system partition and two boot partitions. (A system partition is the partition that contains the hardware-related files. These tell the computer where to look to start Windows.) To create a partition on a basic disk, there must be unallocated disk space on your hard disk. With Disk Management, you can create a maximum of three primary partitions on a hard disk. You can create extended partitions, which include logical drives within them, if you need more partitions on the disk. Picture of disk space in Computer ManagementUnallocated disk space If there is no unallocated space, you will either need to create space by shrinking or deleting an existing partition or by using a third-party partitioning tool to repartition your hard disk. For more information, see Can I repartition my hard disk? To create a boot partition Warning Warning If you are installing different versions of Windows, you must install the earliest version first. If you don't do this, your computer may become inoperable. Open Computer Management by clicking the Start button Picture of the Start button, clicking Control Panel, clicking System and Security, clicking Administrative Tools, and then double-clicking Computer Management.? Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation. In the left pane, under Storage, click Disk Management. Right-click an unallocated region on your hard disk, and then click New Simple Volume. In the New Simple Volume Wizard, click Next. Type the size of the volume you want to create in megabytes (MB) or accept the maximum default size, and then click Next. Accept the default drive letter or choose a different drive letter to identify the volume, and then click Next. In the Format Partition dialog box, do one of the following: If you don't want to format the volume right now, click Do not format this volume, and then click Next. To format the volume with the default settings, click Next. For more information about formatting, see Formatting disks and drives: frequently asked questions. Review your choices, and then click Finish. I did what you told me @irrational john and this is the screen shot. I ENTERED ubuntu@ubuntu:~$ sudo os-prober computer did not respond so I entered ubuntu@ubuntu:~$ sudo apt-get -y remove dmraid computer responded with Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: dmraid 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 141 kB disk space will be freed. (Reading database ... 147515 files and directories currently installed.) Removing dmraid ... update-initramfs is disabled since running on read-only media Processing triggers for man-db ... I entered ubuntu@ubuntu:~$ sudo os-prober Computer Responded with /dev/sda1:Windows 7 (loader):Windows:chain /dev/sda3:Windows Recovery Environment (loader):Windows1:chain ubuntu@ubuntu:~$ ............... @obsessiveFOSS I don't know what is a Grub menu and I do not know what is the Ubuntu boot option The answer you gave to me was correct. This one {This apparently removes the dmraid metadata. After doing that, you can use the desktop icon Install Ubuntu 12.04 LTS to start the Ubuntu installer. This time the Installation Type window should contain the option to Install Ubuntu alongside Windows 7.} This is what I decided to do. I did not see the rest of your help 'till now. Never the less. I think the best thing for me to do now is to get a cheap used laptop and either do a dual installation or just install Ubuntu on to it. This way if I have any issues that I cannot solve like the one I had here, at least I will still have a usable computer to work on and to use to get answers with because I am not an expert like the people on this forum. Thanks a lot I will try to keep learning and do research enough to some day help someone else.

  Read the article

• Wolkig und heiter

  - by A&C Redaktion

  Mit Solaris 11 bringt Oracle das erste Betriebssystem für die Cloud auf den Markt. Wir hatten es angekündigt, das Thema Cloud wird uns hier im Blog so schnell nicht loslassen: Am Freitag hat nun Oracle sein erstes Unix-Betriebssystem auf den Markt gebracht, das explizit für die Cloud designt wurde: Solaris 11 heißt es und hier ist die Assoziation zu Stanislaw Lems gleichnamigem Science Fiction-Roman durchaus angebracht: Schließlich gilt Cloud Computing als die Technologie der Zukunft schlechthin. Was bietet Solaris 11, welchen Nutzen können die Oracle Partner daraus ziehen? "Kunden können ihre Betriebsabläufe vereinfachen, die Kapazitäten ihrer Rechenzentren erhöhen und Unternehmensanwendungen von Oracle und anderen in einer sicheren, skalierbaren Cloud oder in einer klassischen Unternehmensumgebung laufen lassen“, fasst John Fowler, Executive Vice President, Systems zusammen. Darf‘s auch etwas konkreter sein? Bitte: Oracle Solaris 11 dient ganz einfach dazu, selbst anspruchsvollste Unternehmensanwendungen in privaten, hybriden und Public Clouds zu betreiben. Als vollständig virtualisiertes Betriebssystem verfügt es über integrierte Virtualisierungs-Funktionen, sowohl für Betriebssystem- als auch für Netzwerk- und Speicher-Ressourcen. Die Server-Virtualisierung sorgt für sichere Live-Migration und flexible Einsatzmöglichkeiten – basierend auf Oracle VM für x86- und SPARC-Systeme. Höchste Verfügbarkeit wird erreicht, indem Solaris 11 ein umfassendes Management über die gesamte Infrastruktur hinweg ermöglicht. Oracle Solaris 11 bietet bereits im Standardbetrieb aktive Sicherheit „by default“, wie rollenbasierten Root-Zugriff und Überwachungsfunktionen. Die Daten- und Speichermanagement-Basis für Oracle Solaris 11 ist Oracle Solaris ZFS. Neben garantierter Datenintegrität erlaubt das Tiered Storage das Einrichten von Pools mit Flash-Speicher und zudem Hochgeschwindigkeitsverschlüsselung. Ein Blick in die Presse zeigt, dass Solaris 11 durchaus für Aufsehen in der Fachwelt sorgt, so äußert sich etwa die Netzwelt sehr positiv: „Die neue Paketverwaltung IPS trägt wie die genannten Neuerungen dazu bei, dass Solaris es in Version 11 durchaus wieder mit den etablierten Linux-Distributionen aufnehmen kann. Das Betriebssystem macht nicht nur im Server-, sondern auch im Desktop-Einsatz eine sehr gute Figur und glänzt mit hoher Stabilität.“ Hier die direkten Links zu weiteren Berichten über Solaris11 in der Fachpresse: Heise onlineZDNetGolem.deSilicon.deAll about SECURITYIT DirectorPro-Linux.deTech ChannelLinux Magazin

  Read the article

• Can I re-license Academic Free License code under 2-Clause BSD / ITC?

  - by Stefano Palazzo

  I want to fork a piece of code licensed under the Academic Free License. For the project, it would be preferable to re-license it under the ISC License or the 2-Clause BSD license, which are equivalent. I understand that the AFL grants me things such as limitation of liability, but licensing consistency is much more important to the project, especially since we're talking about just 800 lines of code, a quarter of which I've modified in some way. And it's very important for me to give these changes back to the community, given the fact that this is software relevant to security - I need the public scrutiny that I'll get by creating a public fork. In short: At the top of the file I want to say this, or something like it: # Licensed under the Academic Free License, version 3 # Copyright (C) 2009 Original Author # Licensed under the ISC License # Copyright (C) 2012 Stefano Palazzo # Copyright (C) 2012 Company Am I allowed to do this? My research so far indicates that it's not clear whether the AFL is GPL-Compatible, and I can't really understand any of the stuff concerning re-licensing to other permissive licenses. As a stop gap, I would also be okay with re-licensing under the GPL, however: I can find no consensus (though I can find disagreement) on whether this is allowed at all, and I don't want to risk it, of course. Wikipedia: ISC License Wikipedia: Academic Free License

  Read the article

• Problem During Installation SQL Server 2005 on Windows 7

  - by mlife

   Yesterday I was trying to install SQL Server 2005 on windows 7. During installation a popup error dialog shown with this message: The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually. Here is the captured screen: But in books online there was no useful information! After some hours googling, I did not found any useful information and at 3 o'clock of midnight, I was scratching my head! Believe it, I attempted to install SQL Server more than 15 times with different manners (with command prompt & parameters and else). Eventually I found the resource of problem, that was "BitDefender Internet Security 2010"! After uninstalling BitDefender Internet Security, I installed SQL Server 2005 and then reinstalled BitDefender. Just that! Problem resolved. Conclusion: After installing a new version of windows and it's requirements (like IIS and language specifications & else), first install the SQL Server and the Visual Studio and then other applications.Hope be helpful.  

  Read the article

• What is the difference between Row Level Security and RPD security?

  - by Jeffrey McDaniel

  Row level security (RLS) is a feature of Oracle Enterprise Edition database. RLS enforces security policies on the database level. This means any query executed against the database will respect the specific security applied through these policies. For P6 Reporting Database, these policies are applied during the ETL process. This gives database users the ability to access data with security enforcement even outside of the Oracle Business Intelligence application. RLS is a new feature of P6 Reporting Database starting in version 3.0. This allows for maximum security enforcement outside of the ETL and inside of Oracle Business Intelligence (Analysis and Dashboards). Policies are defined against the STAR tables based on Primavera Project and Resource security. RLS is the security method of Oracle Enterprise Edition customers. See previous blogs and P6 Reporting Database Installation and Configuration guide for more on security specifics. To allow the use of Oracle Standard Edition database for those with a small database (as defined in the P6 Reporting Database Sizing and Planning guide) an RPD with non-RLS is also available. RPD security is enforced by adding specific criteria to the physical and business layers of the RPD for those tables that contain projects and resources, and those fields that are cost fields vs. non cost fields. With the RPD security method Oracle Business Intelligence enforces security. RLS security is the default security method. Additional steps are required at installation and ETL run time for those Oracle Standard Edition customers who use RPD security. The RPD method of security enforcement existed from P6 Reporting Database 2.0/P6 Analytics 1.0 up until RLS became available in P6 Reporting Database 3.0\P6 Analytics 2.0.

  Read the article

• Trying to install flash player on ubuntu 12.04

  - by Eric

  I am having trouble installing this program. I do not know how to locate the browser plugins directory, or change the directory in the terminal. Installation instructions Installing using the plugin tar.gz: Unpack the plugin tar.gz and copy the files to the appropriate location. Save the plugin tar.gz locally and note the location the file was saved to. Launch terminal and change directories to the location the file was saved to. Unpack the tar.gz file. Once unpacked you will see the following: + libflashplayer.so + /usr Identify the location of the browser plugins directory, based on your Linux distribution and Firefox version Copy libflashplayer.so to the appropriate browser plugins directory. At the prompt type: cp libflashlayer.so <BrowserPluginsLocation> Copy the Flash Player Local Settings configurations files to the /usr directory. At the prompt type: sudo cp -r usr/* /usr Installing the plugin using RPM: - As root, enter in terminal: rpm -Uvh <rpm_package_file> - Click Enter key and follow prompts Installing the standalone player Unpack the tar.gz file To execute the standalone player Double-click, or enter in terminal: ./flashplayer

  Read the article

• Load different levels in XML

  - by Anearion

  my question is more about a theoretical gener than a pratical way to make things happen. I'm about start developing a game for android, text based so i won't need sprites or animation, nor a game engine. Let's say is similar to a sudoku game, where each level is an harder version of sudoku and each level has some question to be asnwered over the sudoku itself. I was wondering if the better way is to have only one XML and then inside all the different levels, each one with his meta-tags, or if the different approach of making n xml files where each one is a level is preferred. At the moment a level should have those tags: <level> <question>Question_1</question> <hint1>what does it do?</hint1> <hint2>where...</hint2> .... <hintN>how...</hintN> </level> So each level could have some items to read and that's what made me think that maybe different files are better cuz if i have to load lvl 10 i can read only the 10.xml file. I hope my question isn't too stupind. Thanks in advance

  Read the article

• Wacom Bamboo CTH460L issues in Ubuntu 10.04

  - by Robert Smith

  I recently bought a Wacom Bamboo Pen & Touch CTH460L. I installed doctormo PPA, however, the pen functionality didn't work and the touch was very glitchy (when I touched it, it immediately double clicked and began to drag elements in the screen). I tried to configure it using the wacom-utility package in the Synaptic Package Manager (version 1.21-1) but that didn't work either. Then I followed this post (#621, written by aaaalex), and after some problems trying to restart Ubuntu (graphics related problems), the pen works fine (it could be better, though) but the touch functionality doesn't work anymore. Currently I have installed xserver-xorg-input-wacom (1:0.10.11-0ubuntu7), wacom-dkms (0.8.10.2-1ubuntu1) and wacom-utility. The Wacom Utility only displays an "options" field under "Wacom BambooPT 2FG 4X5" but no other option to configure it. What is the correct way to get this tablet working on Ubuntu 10.04?. By the way, currently I can't start Ubuntu properly when the tablet is connected (in that case, Ubuntu start in low graphics mode). I need to connect it later.

  Read the article

• Hiding the Flash Message After a Time Delay

  - by Madhan ayyasamy

  Hi Friends,The flash hash is a great way to provide feedback to your users.Here is a quick tip for hiding the flash message after a period of time if you don’t want to leave it lingering around.First, add this line to the head of your layout to ensure the prototype and script.aculo.us javascript libraries are loaded:Next, add the following to either your layout (recommended), your view templates or a partial depending on your needs. I usually add this to a partial and include the partial in my layouts. "flash", :id = flash_type % "text/javascript" do % setTimeout("new Effect.Fade('');", 10000); This will wrap the flash message in a div with class=‘flash’ and id=‘error’, ‘notice’ or ‘warn’ depending on the flash key specified.The value ‘10000’ is the time in milliseconds before the flash will disappear. In this case, 10 seconds.This function looks pretty good and little javascript stunts like this can help make your site feel more professional. It’s also worth bearing in mind though, not everybody can see well or read as quickly as others so this may not be suitable for every application.Update:As Mitchell has pointed out (see comments below), it may be better to set the flash_type as the div class rather than it’s id. If there is the possibility that you’ll be showing more than one flash message per page, setting the flash_type as the div id will result in your HTML/XHTML code becoming invalid because the unique intentifier will be used more than once per page.Here is a slightly more complex version of the method shown above that will hide all divs with class ‘flash’ after a time delay, achieving the same effect and also ensuring your code stays valid with more than one flash message! "flash #{flash_type}" % "text/javascript" do % setTimeout("$$('div.flash').each(function(flash){ flash.hide();})", 10000); In this example, the div id is not set at all. Instead, each flash div will have class “div” and also class of the type of flash message (“error”, “warning” etc.).Have a Great Day..:)

  Read the article

• Oracle Key Vault - Hardware Security Modul für TDE und mehr

  - by Heinz-Wilhelm Fabry (DBA Community)

  Anfang August hat Oracle ein neues Produkt namens Oracle Key Vault (OKV) zum Einsatz freigegeben. Es handelt sich dabei um ein Hardware Security Modul (HSM) - also um ein Stück Hardware zum Speichern von Schlüsseln, Passwörtern und Dateien, die Schlüssel und Passwörter enthalten. Oracle Datenbank Installationen nutzen die zuletzt genannte Form des Speicherns von Passwörtern und Schlüsseln in Dateien für Oracle Advanced Security Transparent Data Encryption (TDE) und external password stores. Die Dateien werden in den Versionen 10 und 11 der Datenbank als Wallets bezeichnet, in der Version 12 als Keystores. Allerdings gibt es auch schon seit der Datenbankversion 11.2 beim Einsatz von TDE die Möglichkeit, statt der Wallets / Keystores HSMs einzusetzen. Da Oracle selbst kein eigenes HSM Produkt anbieten konnte, haben Unternehmenskunden dann auf Produkte anderer Anbieter zurückgegriffen. Das kann sich mit OKV nun ändern. Abhängig vom Bedrohungsszenario kann die Entscheidung gegen den Einsatz von Wallets / Keystores und für den Einsatz eines HSMs durchaus sinnvoll sein, denn ein HSM bietet mehr Sicherheit: Eine Betriebssystemdatei kann leichter gestohlen (kopiert) werden, als ein HSM, das in der Regel als speziell gesicherte Steckkarte in einem Rechner eingebaut ist oder als eigenes Gerät geschützt in einem Rechenzentrum steht. ein HSM kann anders als ein Wallet / Keystore systemübergreifend verwendet werden. Das erlaubt eine gemeinsame Nutzung von Schlüsseln - was wiederum zum Beispiel den Einsatz von TDE auf RAC Installationen perfekt unterstützt. ein HSM kann von mehreren Anwendungen genutzt werden. Das erleichtert das Konsolidieren und Verwalten von Passwörtern und Schlüsseln. Im aktuellen Tipp wird als Einführung in das neue Produkt dargestellt, wie OKV für TDE genutzt werden kann.

  Read the article

• Is shipping a Clojure desktop app realistic?

  - by Cedric Martin

  I'm currently shipping a desktop Java application. It is a plain old Java 5 Java / Swing app and so far everything worked nicely. Java 5 was targetted because some users were on OS X version / computers that shall never have Java 6 (we may lift this limitation soon and switch to a newer Java and simply abandoning my users stuck with Java 5). I'm quickly getting up to speed with Clojure but I haven't really done lots of Clojure-to-Java and Java-to-Clojure yet and I was wondering if it was realistic to ship a Clojure desktop application instead of a Java application? The application I'm shipping is currently about 12 MB with all the .jar so adding Clojure doesn't seen to be too much of an issue. My plan would be to have Clojure call Java APIs: my application is already divided in several independent jars. If I understand correctly calling Clojure from Java is harder than calling Java code from Clojure which is why I'd basically rewrite all the UI (part of the UI, mixing Swing components and self-made BufferedImages needs to be rewritten anyway due to the rise of retina display), and do all the 'wiring' from Clojure. So that's the problem I'm facing: is it realistic to ship a Clojure desktop app? (it certainly doesn't seem to be very widespread but then shipping plain Java desktop apps ain't that common either and I'm doing it anyway) Technically, what would need to be done? (compared to shipping a Java app)

  Read the article

• Java2Days 2012 Trip Report

  - by reza_rahman

  Java2Days 2012 was held in beautiful Sofia, Bulgaria on October 25-26. For those of you not familiar with it, this is the third installment of the premier Java conference for the Balkan region. It is an excellent effort by admirable husband and wife team Emo Abadjiev and Iva Abadjieva as well as the rest of the Java2Days team including Yoana Ivanova and Nadia Kostova. Thanks to their hard work, the conference continues to grow vigorously with almost a thousand enthusiastic, bright young people attending this year and no less than three tracks on Java, the Cloud and Mobile. The conference is a true gem in this region of the world and I am very proud to have been a part of it again, along with the other world class speakers the event rightfully attracts. It was my honor to present the first talk of the conference. It was a full-house session on Java EE 7 and 8 titled "JavaEE.Next(): Java EE 7, 8, and Beyond". The talk was primarily along the same lines as Arun Gupta's JavaOne 2012 technical keynote. I covered the changes in JMS 2, the Java API for WebSocket (JSR 356), the Java API for JSON Processing (JSON-P), JAX-RS 2, JCache, JPA 2.1, JTA 1.2, JSF 2.2, Java Batch, Bean Validation 1.1 and the rest of the APIs in Java EE 7. I also briefly talked about the possible contents of Java EE 8. My stretch goal was to gather some feedback on some open issues in the Java EE EG (more on that soon) but I ran out of time in the short format forty-five minute session. The talk was received well and I had some pretty good discussions afterwards. The slides for the talk are here: JavaEE.Next(): Java EE 7, 8, and Beyond from reza_rahman To my delight, the Java2Days folks were very interested in my domain-driven design/Java EE 6 talk (titled "Domain Driven Design with Java EE 6"). I've had this talk in my inventory for a long time now but it always gets overridden by less theoretical talks on APIs, tools, etc. The talk has three parts -- a brief overview of DDD theory, mapping DDD to Java EE and actual running DDD code in Java EE 6/GlassFish. For the demo, I converted the well-known DDD sample application (http://dddsample.sourceforge.net/) written mostly in Spring 2 and Hibernate 2 to Java EE 6. My eventual plan is to make the code available via a top level java.net project. Even despite the broad topic and time constraints, the talk went very well. It was a full house, the Q & A was excellent and one of the other speakers even told me they thought this was the best talk of the conference! The slides for the talk are here: Domain Driven Design with Java EE 6 from Reza Rahman The code examples are available here: https://blogs.oracle.com/reza/resource/dddsample.zip for now, as a simple zip file. Give me a shout if you would like to get it up and running. It was also a great honor to present the last session of the conference. It was a talk on the Java API for WebSocket/JSR 356 titled "Building HTML5/WebSocket Applications with JSR 356 and GlassFish". The talk is based on Danny Coward's JavaOne 2012 talk. The talk covers the basic of WebSocket, the JSR 356 API and a simple demo using Tyrus/GlassFish. The talk went very well and there were some very good questions afterwards. The slides for the talk are here: Building HTML5/WebSocket Applications with GlassFish and JSR 356 from Reza Rahman The code samples are available here: https://blogs.oracle.com/arungupta/resource/totd183-HelloWebSocket.zip. You'll need the latest promoted GlassFish 4 build to run the code. Give me a shout if you need help. Besides presenting my talks, I got to attend some great sessions on OSGi, HTML5, cloud, agile and Java 8. I got an invite to speak at the Macedonia JUG when possible. Victor Grazi of InfoQ wrote about my sessions and Java2Days here: http://www.infoq.com/news/2012/11/Java2DaysConference. Stoyan Rachev was very kind to blog about my sessions here: http://www.stoyanr.com/2012/11/java2days-2012-java-ee.html. I definitely enjoyed Java2Days 2012 and hope to be part of the conference next year!

  Read the article

• Installation Problems & Antivirus

  - by Sagar Walvekar

  We have just migrated our systems from Windows to Ubuntu. We have more than 50 systems previously running Windows XP & Windows 7. After the release of 12.04 we decided to switch to Ubuntu. While we were installing Ubuntu 12.04 on Pentium 4 systems we have faced some issues. We tried it with a USB flash driver & CD. The typical configuration of the system is as follows: Pentium 4 with HT & 512 MB RAM, 40/80 GB IDE / SATA HDD. In windows there were several partitions and data on all the drives in all the systems. We have addressed this by taking backup of the C: drive on other drives & while installing Ubuntu we have just deleted & the C drive & recreated Linux partitions as follows - /root , /Boot, /Home & Swap.(in 10 GB) The problem is that the Linux gets installed without any error. However when I restart the system after the installation the system hangs in while detecting the HDD in BIOS and the system fails to start until I remove the HDD. When I installed the previous Ubuntu version it worked fine, without any hassle. Also if we install Ubuntu 12.04 on same HDD on any other higher capacity system & reconnected to old system it works fine. How can I fix this problem? Also, is there is any Antivirus which will give me real time protection on ubuntu 11 & higher versions with both 32 & 64 Bits?

  Read the article

• Booting sequence. Ubuntu 12.04 installation and cohabitation with former OSes

  - by Stephane Rolland

  I am on the brink of installing Ubuntu 12.04 Precise Pengolin on the first primary partition of my hard-drive. (A day in History for me since I had always kept a MS windows at this first place). But I have some fears: This is my last computer available (In the past I used to have 2 or even 3 machines so I could always un/plug HDs for recovery operations and rescue) The current booting sequence is not straight forard. So as to explain the boot sequence let me briefly sum-up the history of this laptop computer. It was a dedicated Windows Vista computer. 1st and only Primary partition. Then I added Windows 7 (on the 2nd primary partition) letting the Windows Vista Boot Loader manage the boot sequence. Then I added Ubuntu 10.04 Lucid Lynx on the 1st sub-partition of the Extended Partitionm asking Grub to be the boot loader. But when I ask Grub to launch windows it launches the Vista BootLoader that manages the choice betzeen Vista and 7. So in theory Grub is on the MasterBootRecord - though I understand where the Vista BootLoader remains. Now, I will no longer use the Ubuntu 10.04 ( on extended partition) and also the Windows vista (on the first primary partition). I will install Ubuntu 12.04 on the First Primary, asking it to install a new bootloader. I want to keep the Windows 7 that is already on the Second Primary partition. And I want it to be loaded by the Ubuntu Boot loader(I don4t knoz zhich is included in this version)... And I am afraid the last point will not work.

  Read the article

• How do i disable intel graphics in a hybrid graphics setup?

  - by Eshwar

  Hi, I have a Dell Vostro 3700 version A10. The relevant bits from lspci -v | grep VGA are: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) and 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 330M] (rev a2) so as you can see this is one of those hybrid graphics laptops. Now, I have no interest in any kind of switching. I would like to completely disable the Intel Graphics thats on the processor. I checked in the xorg.log file and it shows that the intel card is in use. from lsmod i see it uses the i915 module. I tried blacklisting that module in /etc/modprobe.d/blacklist.conf but that didn't really work because i still couldn't use the nvidia card for display. I wish there was a BIOS option to disable, but there isn't. Some people have also suggested changing the SATA mode to compatibility, but that does not work either in this case as the intel vga controller still shows up in lspci I tried setting the busid manually in the /etc/X11/xorg.conf file but it still didn't work. It gave me an error that said something along the lines of screen not detected. any bits of xorg.log that you'd like me to attach? So what I am looking for is some solution that allows me to completely disable the use of the intel vga controller. if it was blocked somehow it'd be nice. as if it were not present. Any suggestions? I am desperate here actually. Because I cannot use the HDMI port right now on my laptop for that reason. My guess is this applies to desktops that also have Core i5 processors with onchip graphics as well as dedicated graphics cards. How would they go about solving the problem?

  Read the article

< Previous Page | 975 976 977 978 979 980 981 982 983 984 985 986  | Next Page >