Search Results

Search found 60689 results on 2428 pages for 'windows xp embedded'.

Page 979/2428 | < Previous Page | 975 976 977 978 979 980 981 982 983 984 985 986  | Next Page >

• Adding 2008 Server to 2008 Domain

  - by Phillip

  Hello, I'm trying to create a lab for testing before I deploy solutions, I'm no experienced IT Administrator, and therefore I come here for help. I'm running 2 Virtual Servers on the same machine on a local connection between those two. They'are able to ping each other. Their names is TSDATA1 and TSDATA2 where TSDATA1 is the Domain Controller. I am able to ping between those two, on both "ping TSDATA1" and "ping 10.0.0.1" which is the IP address of TSDATA1. The IP address of TSDATA2 is 10.0.0.2. I'm trying to join the domain with TSDATA2 both I'm getting this error when trying: Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt. The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain tsdata.local: The error was: "DNS name does not exist." (error code 0x0000232B RCODE_NAME_ERROR) The query was for the SRV record for _ldap._tcp.dc._msdcs.tsdata.local Common causes of this error include the following: The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses: 10.0.0.1 One or more of the following zones do not include delegation to its child zone: tsdata.local local . (the root zone) For information about correcting this problem, click Help. I've figured out it has something to do with DNS lookup, but I have no clue what to do. Can anyone help?

  Read the article

• Fatal Execution Engine Error on the Windows2008 r2, IIS7.5

  - by user66524

  Hi Guys We are running some asp.net(3.5) applications on the Windows2008 r2, IIS7.5. Recently we got some event logs so difficult, we have not idea hope some guys can help. 1.EventID: 1334 (9-1-2011 8:41:57) Error message An error occurred during a process host idle check. Exception: System.AccessViolationException Message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. StackTrace: at System.Collections.Hashtable.GetEnumerator() at System.Web.Hosting.ApplicationManager.IsIdle() at System.Web.Hosting.ProcessHost.IsIdle() 2.EventID: 1023 (9-1-2011 19:44:02) Error message .NET Runtime version 2.0.50727.4952 - Fatal Execution Engine Error (742B851A) (80131506) 3.EventID: 1000 (9-1-2011 19:44:03) Error message Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bcd2b Faulting module name: mscorwks.dll, version: 2.0.50727.4952, time stamp: 0x4bebd49a Exception code: 0xc0000005 Fault offset: 0x0000c262 Faulting process id: 0x%9 Faulting application start time: 0x%10 Faulting application path: %11 Faulting module path: %12 Report Id: %13 4.EventID: 5011 (9-1-2011 19:44:03) Error message A process serving application pool 'AppPoolName' suffered a fatal communication error with the Windows Process Activation Service. The process id was '2552'. The data field contains the error number. 5.some info: we got the memory.hdmp(234MB) and minidump.mdmp(19.2) from control panel action center but I donot know how to use that :(

  Read the article

• Failed to generate a user instance of SQL Server

  - by Goondocks

  I'm using Windows 7 Beta and trying to install a web application locally. This web site uses Microsoft SQL Server 2005 Express (SQLEXPRESS) and a MDB file in the web site's ~/App_Data folder. I was instructed to configure IIS7 to use Classic .NET AppPool for this web application. Each time the web site loads, I receive the following error: There was an error trying to connect to the Database Server: Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed. The Internet is packed with articles written on this subject. The prevailing wisdom seems to be: Configure the SQL Express Service to use the Local System account. Delete the following directory: C:\Users\username\AppData\Microsoft\Microsoft SQL Server Data\SQLEXPRESS Neither of these fixes have made any impact. I have tinkered with permissions and settings for hours to no avail. Can anyone suggest a fix or help me understand how to get more detailed information about the problem.

  Read the article

• Backup with Mercurial and Robocopy?

  - by Andrew Neely

  The Problem We would like to backup our critical files from several network shares to a removable hard drive. We want to automate the backup so we don't have to remember to run it. It needs to finish overnight. Furthermore, we want to be able to preserve multiple versions of each file so we can back out of our user's mistakes easier. Background Information I work in a large Windows-based enterprise with a centralized IT section who is responsible for all backups. Their backups are geared towards disaster recovery and not user error, and require upper-level management approval for any non-disaster recoveries. Several times we have noticed that our backups have failed, we weren't notified. I do not have administrative rights to the server or my desktop. We are trying to backup some 198,000 files spanning about 240 gigabytes. These files rarely change. Our backup drive is one terabyte. My Proposed Solution What I would like to do is to write a batch file using Robocopy with the /mir option along with Mercurial SCM to store all versions of the file. I would do an hg add followed by an hg commit before each execution of Robocopy to save the current state, and then make a mirrored copy of the file structures. The problem is the /mir will delete every folder not present in the source, and Mercurial stores the repository in a .hg folder in the destination folder. Does anybody know how I could either convince Mercurial to store the .hg folder elsewhere, or convince Robocopy not to delete it from the destination? I'm trying to avoid writing a custom program do to copying.

  Read the article

• Migrate Domain from Server 2008 R2 to Small Business Server 2011

  - by josecortesp

  I'm looking for some advice here, rather than the big how to do it I'm looking for what do to I have this home server, quad core and 4 GB of ram (I really can't afford more right now). With a Windows Serve 2008 R2 With ActiveDirectory and a Hyper-V-Virtual machine with SharePoint, TFS and a couple of more thigs. I have a least 10 remote users, all of them joined a Hamachi VPN (working great by the way). But I want to migrate that to a Small Business Server 2011 Standard. I tried to make a VM to join the domain and then promote that VM, back up it and then format the physical server, boot up the VM, Promote the Phisical and then erase the VM, but I can't do that because of SBS requiring a least 4 GB of ram to install (so I can't give all the 4 GB of physical ram to a VM). I was thinking in using a laptop (All the clients are laptop) as a temporal server, join the domain, promote it, then format the server and install SBS on the server and do all again. I really need some advice. Thanks in advance. BTW, I know that the software I'm using is kindda expensive, and I can't afford more hardware. I have access to MS downloads by a University partnership so I have all this software for free.

  Read the article

• copying folder and file permissions from one user to another after switching domains [closed]

  - by emptyspaces

  Please excuse the title, this was the best way I could think to describe this scenario without an entire paragraph. I am using C#. Currently I have a file server running windows server 2003 setup on a domain, we will call this oldDomain, and I have about 500 user accounts with various permissions on this server. Because of restrictions out of my control we are abandoning this domain and using another one that is more dominant within the organization, we will call this newDomain. All of the users that have accounts on oldDomain also have accounts on newDomain, but the usernames are completely different and there is no link between the two. What I am hoping to do is generate a list of all user accounts and this appropriate sid's from AD on the oldDomain, I already have this part done using dsquery and dsget. Then I will have someone go through and match all of the accounts from oldDomain to the correct username on newDomain. Ultimately leaving me with a list of sids from oldDomain and the appropriate username from newDomain. Now I am hoping to copy the file and folder permissions from the old user from oldDomain to the new user on newDomain once I join the server to newDomain. Can anyone tell me what the best way to copy permissions from the sid to the user on newDomain? There are a bunch of articles out there about copying permissions from user a to user b but I wanted to check and see what the recommended practice is here since there are a ton of directories.

  Read the article

• Performance Test and TCP tuning

  - by Mithir

  We are in the process of performance testing an application which receives tcp requests converts them to soap requests (WCF-httpBinding) which other services work on. The server is Windows Server 2008 R2. The TCP requests are received by TcpListener instance (.NET C#). There are 3 http-binded WCF services running on the same server. We have built a performance test client which goal is to simulate multiple concurrent requests(each request has to be different and recognizable by the application). We built a test running 150 requests that run on the same time (by 150 different threads), and we noticed straight away that some requests get the TCP connection slowly, but once they get it, they act fast. A single request writes twice on the same connection- request and an application ack. Although a single request+ack can take about 150ms, the 150 test takes about 7 seconds. The Problem When we try to run this test from 2 different computers we lose requests. some clients requests are getting no connection was made because the target machine actively refused it So I got here and got convinced it was because of the backlog. I changed the TcpListener parameters and did the registry AFD backlog changes written here but it still didn't work, so I inserted all of the TCP tuning suggested plus some netsh commands which were recommended, but still no change, we still get that error. Is there anything else I need to know? Are there any other solutions?

  Read the article

• W2K INACCESSIBLE_BOOT_DEVICE, with System Commander

  - by Gary Kephart

  I have a system that was originally had Win NT. I added System Commander (SC7) and then added W2K. The relevant partitions are: 0 - Primary - MultiFAT (Has Win NT, mapped to C:) 1 - Extended - with many logical partitions: 1.1 NTFS which has W2K and is mapped to D: 1.2 other logical partitions which are irrelevant to this D: was getting full. It needed room for virus definitions and Windows upgrades. In the past, I had simple used SC7 to resize D: without problems. So I did it again this time. However, upon finishing, I got the message "Unable to create partition". It also marked the partition as unformatted. I checked that the files on the disk were still there using SC7's Partition Explorer, and they were there. I continued and the system managed to boot up fine anyways. Then I rebooted the system again. This time, I got a message saying "INACCESSIBLE_BOOT_DEVICE". I went back in to SC7 and to Partition Commander, and it was still saying that the partition was unformatted but the Partition Explorer still showed the files on the system. I finally decided to resize the partition again, figuring that this would force a rewrite of the partition information. That seemed to work, until I had to reboot again. Now I can't see the files using Partition Explorer, and the Resize button is now disabled. What now?

  Read the article

• Skydrive for desktop not showing icon in notification area

  - by jeruntime

  is this normal behavior? I'm concerned that some files will not be transferred. For example. I need to be sure that its safe to put my laptop to sleep so that later when I'm on my desktop I wont have to open up my laptop and sync again if I closed it too early. It doesn't even appear when I THINK it is syncing. Thanks for any help in advance. edit 1: Yeah I know the app isn't required or even offered anymore, but what I was wondering was if they had some way to tell if it's syncing or not. The old desktop app had an icon in the notification area which had a animation for when it was syncing, but now there isn't anything there. Although when I try to go in and make it appear it says the application isn't active and the icon will show the next time it is. Its version is 17.0.2015.0811 Is it possible to force the icon to show in the notification area if it isn't designed to show up there at all? I basically just want the same functionality of Skydrive on windows 8.

  Read the article

• HyperV - low CPU usage

  - by Klark

  I am very new to HyperV and virtual machine philosophy in general, so please expect more or less nooby questions :) I have a server that is only used as a host for virtual machines. OS is windows server 2008 R2 and it is running on 16 CPU and 48 GBs of RAM. On aforementioned server there are 8 VMs, each having 4 CPUs and 4 GBs of RAM. On those VMs we are running some CPU intensive tasks. Each machine has nearly 100% cpu usage. After I noticed slow performance I went to the host machine and started playing with process explorer. It turned out that cpu usage is very low. Also I/O is very low, and of course, memory consumption is high, which is expected. Of course, I don't expect that those 4 virtual cores dedicated to a VM work as fast as real, hardware 4 cores, but still I expected a higher consumption of real hardware. Is this sort of behaviour normal? I see that the most of CPU usage on host machine are marked as interrupts (which I guess is normal) and all those interrupts are passed to only one core (which is strange). Are there out of box optimization that I could perform to finally use all that processing power that is under the hood. My knowledge of virtualization technology is near to embarrassing, so I would be grateful for any links that could enlightened me :) Thanks.

  Read the article

• Server 2008 NAT Internet Not Working

  - by Jack

  I'm trying to set up Routing and Remote Access on Windows Server 2008 R2, I have a network connection that I want to share the internet from to another private network. The server has two NICs which are configured as follows: External NIC (Dynamically assigned by ISP) IP:10.175.4.150 Subnet:255.255.192.0 Gateway:10.175.0.1 DNS:10.175.0.1 Internal NIC IP:172.16.254.1 Subnet:255.255.255.0 Gateway:None DNS:None I have set the external NIC to be the public interface and enabled NAT on it in the RRAS MMC and set the internal NIC to be a private interface. I have also set up the DNS forwarding or whatever it is in the NAT section. From a client (IP:172.16.254.2) I can ping the server and access files on it, when I try to browse the web with the default gateway set to the internal NIC ip I end up getting a 404 page which is returned from the ISPs default gateway. I'm guessing it's something to do with the double NAT possibly. Trying to ping the ISPs default gateway from a private network client just times out as does accessing it directly. I've disabled and reconfigured RRAS multiple times and that doesn't seem to have made a difference, so can anyone tell me what I'm doing wrong? Thanks.

  Read the article

• Sync Two Exchange accounts or Ready Only access to subfolders

  - by cpgascho

  This is two questions kind of. The situation is as follows. I am running SBS 2008 with Exchange 2007. There is a shared account which has subfolders to keep track of the process of jobs that are coming into the company (ie: sales) I need to give other people in the company read access to this mailbox not full control. When I give ready only access to the root other users can only see the Inbox and not subfolders. Permissions have to be applied to each folder. One solution I have considered is creating a secondary mailbox that everyone could have full access too which would have a one way sync from the sales mailbox to the secondary mailbox. Then people could see what was happening without messing up the main mailbox by accident (at worst they would mess up the secondary mailbox) Ideally I could find a way to propgate the READ ONLY Permissiosn to all the subfolders. I have tried using PFDavAdmin to do this but have not been able to get it to connect successfully from Windows 7 To Exchange 2007 Any idea on how to 1. Propogate permissions (get PFDavAdmin to work??!) 2. Sync mailboxes 3. Other solution? Thanks Chris

  Read the article

• Proper Network Infastructure Setup DMZ, VPN, Routing Hardware Question

  - by NickToyota

  Greetings Server Fault Universe, So here's a quick background. Two weeks ago I started a new position as the systems administrator for an expanding health services company of just over 100 persons. The individual I was replacing left the company with little to no notice. Basically, I have inherited a network of one main HQ (where I am situated) which has existed for over 10 years, with five smaller offices (less than 20 persons). I am trying to make sense of the current setup. The network at the HQ includes: Linksys RV082 Router providing internet access for employees and site to site VPN connecting the smaller offices (using an RV042 each). We have both cable and dsl lines connected to balance traffic (however this does not work at all and is not my main concern right now). Cisco Ironport appliance. This is the main gateway for our incoming and outgoing emails. This also has an external IP and internal IP. Lotus domino in and out email servers connected to the mentioned Cisco gateway. These also have an external IP and internal IP. Two windows 2003 and 2008 boxes running as domain controllers with DNS of course. These also have both an external IP and internal IP. Website and web mail servers also on both external and internal IPs. I am still confused as why there are so many servers connected directly to the internet. I am seriously looking to redesign this setup with proper security practices in mind (my highest concern) and am in need of a proper firewall setup for the external/internal servers along with a VPN solution about 50 employees. Budget is not a concern as I have been given some flexibility to purchase necessary solutions. I have been told Cisco ASA appliance may help. Does anyone out in the Server Fault Universe have some recommendations? Thank you all in advance.

  Read the article

• Dynamic ARP Entries turning into Static ARP entries

  - by Zach

  I recently acquired a client that has a strange ARP caching issue on one of thier servers. I have a server that will eventually start turning it's dynamic ARP entries into static ARP entries. This causes problems because when the machine that has a static ARP entries on this server receives a new IP via DHCP, then the server is not able to communicate with the clients. Clearing the ARP cache resolves the issue and the server is fine for about a week and then it starts slowly turning ARP entries into static ARP entries. I haven't narrowed it down to when or how many it starts to do, but slowly you start seeing 1 static ARP and then 5 and then 10. The server in question is a Windows Server 2003 SP2. It is a DC, DHCP, and DNS server. I've checked the DHCP scope options and there's nothing in there that would indicate anything to do with static ARP entries. The only thing different between this DNS server and our other DNS server is that the 'Dynamically Update DNA A and PTR records for DHCP clients that do not request updates' is checked on the problematic server. I've done a bit of research about this and it seems that this may happen if any PXE type services are running, from what I can tell, there is nothing running a PXE server. I'm a bit lost as I have never seen dynamic ARP entries start to turn into static ARP entries. Right now my solution is a schedule task that runs every 24 hours to clear the ARP cache (arp -d *). I would like to not rely on this schedule task. Has anybody seen this before or have any suggestions on how to troubleshoot this?

  Read the article

• Q&amp;A: What is the UK pricing for the Windows Azure CDN?

  - by Eric Nelson

  The pricing for Windows Azure Content Delivery Network (CDN) was announced last week. The prices are: £0.091 per GB transferred from North America & Europe locations £0.1213 per GB transferred from other locations £0.0061 per 10,000 transactions CDN rates are effective for all billing periods that begin subsequent to June 30, 2010. All usage for billing periods beginning prior to July 1, 2010 will not be charged. To help you determine which pricing plan best suits your needs, please review the comparison table, which includes the CDN information. Steven Nagy has also done an interesting follow up post on CDN. Related Links: Q&A- How can I calculate the TCO and ROI when considering the Windows Azure Platform? Q&A- When do I get charged for compute hours on Windows Azure? Q&A- What are the UK prices for the Windows Azure Platform

  Read the article

• How can I recover from SharePoint configuration errors after promoting the server to a Domain Controller?

  - by jjr2527

  I have a SharePoint 2010 VM setup in VirtualBox and I was using local machine accounts to handle security on the server. While preparing for a demo it came time to have some meaningful users on my VM image. I followed some docs on promoting my server to a Domain Controller in a new forrest. So now I have [MachineName].SPDEMO.CONTOSO.com and I can add users as needed. However, when I try to connect to my SharePoint sites I am getting a white screen with the error: "Cannot connect to the configuration database" I changed the pool identity account of each of my IIS app pools to the new Administrator account and started the services successfully but I can't get the SQL services to start up. When I try to start them I get the following error: Windows could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 17058. In the event log I see the following error: The SQL Server (MSSQLSERVER) service terminated with service-specific error %%17058. Can I recover from this or should I roll back or just uninstall the Domain Controller role. I'd like to keep the server as a standalone DC so I can do some user profile creation/management but I need the SharePoint bits to work as well.

  Read the article

• Tool to modify properties/metadata of a PDF? i.e. Change "Title", "Author"? Sony Reader showing som

  - by Chris W. Rea

  I own a Sony Reader PRS-600 ebook reader. I bought a ton of Manning Publications ebooks (DRM-free) recently. Many of the books are PDFs since not all the ones I wanted are available in epub format. The problem: Some of the PDF books I purchased have incorrect or missing metadata. Making things worse, the Sony Reader only displays the "Title" from the PDF metadata when displaying book titles in the reader's collection of books! The Reader doesn't display the filename. So, even though I have a PDF informatively named "Windows PowerShell In Action.pdf", it shows up as "untitled" in the Reader. Imagine how useful the Reader's list of book titles becomes when many are just "untitled" or "unnamed document" ! Yes, it is maddening. So – short of expecting the publisher to fix the files or Sony to add a filename-based list instead, I'm looking for a way to fix the PDF metadata. I can view the metadata with Adobe Reader, but it doesn't permit modification of the properties. Leading to: Question: Is there a tool – free, or cheap – and either for PC or Mac, that can modify the properties / metadata of a DRM-free PDF document? I want to correct "Title" and "Author" fields, specifically.

  Read the article

• Cannot ping Google Public DNS on 8.8.8.8

  - by Tibor

  I have a weird problem on my Windows 7 (x64) computer. I seem to cannot ping the Google Public DNS on one of its addresses (while the other works fine). The peculiar thing is that it fails with the General failure. error message which usually means that there is a problem with a network adapter/base connectivity and not a timeout as one would expect. I checked my routing tables for any anomalies and I even flushed them but the problem seems unrelated. All the other hosts I tried ping fine (either respond or timeout). If I try to tracert or connect to the address via browser (yes, I know that it doesn't listen on port 80), it also fails instantaneously. The reason I need to ping 8.8.8.8 is that I commonly use it as a test of Internet conectivity due to it being rememberable. The problem occurs no matter where I connect to the Internet (it is a laptop computer). What could be the cause of this anomaly? Note: I use native IPv6 connectivity.

  Read the article

• Map FTP folder to folder on different FTP server

  - by jolt

  In my team we work a lot with FTP. We upload and download files from several different servers daily. Currently every member of the team manages access credentials to each FTP server locally on their own machine. I am looking for a way to set up a central FTP server that we can connect to, and from there, navigate to folders that each represent one of the other FTP servers that we connect to daily. Something like this: In-house central FTP server: |- FolderA --> server A root folder |- FolderB --> server B root folder |- FolderC --> server C root folder A setup like this, would mean that we can manage access credentials on the central FTP server, and team members would only need to have the access credentials to the central FTP server, and from there they could navigate to the other servers through these "virtual" folders. We could potentially develop our own custom FTP server that just forward requests to the remote FTP servers, but i feel like something like this (or something similar) would already have been done. So I'm looking for pointers that could help us find software for Windows that could help us to simplify our current setup. Thank you! Similar (unanswered) question here: FTP management server

  Read the article

• What are best practices on virtual lab/test bed architecture?

  - by WooYek

  I am currently preparing a new small virtual environment for development and testing with Windows Server + SQL Server + AD + Sharepoint + Exchange + IIS(ASP.NET) + Biztalk + ?, for a small (up to 5) dev team. What are pros and cons on different approaches, eg. splitting up over different machines or packing everything up per machine. I your experience what are the best practices I should follow in terms of architecture and various system/servers placement. What to share and what to split per person. I would like to achieve some flexibility for the dev and testing process (so teammebers would not be steeping on each other's toes) and limit administrative effort needed to propagate settings, integrate work items and revert changes when something breaks up. It's not supposed to be an everyday development working environment, more a tier 2 developer testing environment, and not yet an integration or QA testing environment with formal change process. IMO the two borderline solutions are: creating one all-inclusive machine for each dev team member giving them freedom to manage creating shared environment managed by the one with somehow formalized change request process What golden mean would you recommend, and why?

  Read the article

• How to force a login for an administrator when using Remote Desktop Connection and fast user switching enabled?

  - by brett rogers

  Scenario: I am at work. I want to remote desktop into my machine at home. Problem is, my 5-year-old daughter is playing games on Starfall.com (or something similar) on her (non-admin) account. When I attempt to connect I see this message: Another user is currently logged on to this computer. If you continue, this user has to disconnect from this computer. Do you want to continue? I click Yes and then see Please wait for 'UserName' to respond This presents my daughter with an Allow/Disallow dialog on whether to let me connect. She clicks Disallow (or No or whatever it says) and then I see 'UserName' has denied your request Question: How can I force my account to log in and disconnect her session? Additional Info: My account is an administrator account. My daughter's account is a non-administrator account. Home machine is Windows 7 Pro with fast user switching enabled. Turning off fast user switching is not an option (Kyle pointed out in his answer that turning it off would allow the admin to force another user off). I would keep fast user switching's ability to change accounts without closing the previous account's session over being able to force myself to connect.

  Read the article

• URL sniffer/downloader

  - by Ricket

  Some websites have Flash content that plays music or videos. Most of the time they don't show you the URL of these music or videos, but for example, you can sniff a YouTube webpage and find the flv file that YouTube is actually requesting and playing. Right now I'm using Orbit Downloader, which has a feature called Grab++ that does just this; you start it, and then you refresh the page, and it shows you all files of certain types (image, audio, video) that the webpage requests, and then you can select one or more and download and it downloads them. But, I don't like Orbit, it installs plugins and has the whole download manager thing which I don't really want. What is a good alternative program? I'm not looking for websites like kickyoutube.com, I want a URL sniffer I guess. HTTPGuideDog used to be my Firefox add-on that did exactly this, but it hasn't been updated even to FF3 (and yes I know I can hack it to load anyway, I'm looking for something natively available preferably). I vaguely know of WireShark but last time I used it, I believe it captures individual packets, which is a little too fine-tuned for me. I just want to be able to see what's happening, and download something that the webpage downloaded. Oh, and I'm using Windows 7. Linux probably has some fancy command-line tool, but it just won't cut it for me. :-\ Edit: Oh, and something free please. Feel free to mention paid solutions though.

  Read the article

• setting up git on cygwin - openssl

  - by user23020

  I'm trying to get git running in cygwin on a windows 7 machine I have git unpacked and the directory git-1.7.1.1 when i run make install from within that directory, I get CC fast-import.o In file included from builtin.h:4, from fast-import.c:147: git-compat-util.h:136:19: iconv.h: No such file or directory git-compat-util.h:140:25: openssl/ssl.h: No such file or directory git-compat-util.h:141:25: openssl/err.h: No such file or directory In file included from builtin.h:6, from fast-import.c:147: cache.h:9:21: openssl/sha.h: No such file or directory In file included from fast-import.c:156: csum-file.h:10: error: parse error before "SHA_CTX" csum-file.h:10: warning: no semicolon at end of struct or union csum-file.h:15: error: 'crc32' redeclared as different kind of symbol /usr/include/zlib.h:1285: error: previous declaration of 'crc32' was here csum-file.h:15: error: 'crc32' redeclared as different kind of symbol /usr/include/zlib.h:1285: error: previous declaration of 'crc32' was here csum-file.h:17: error: parse error before '}' token fast-import.c: In function `store_object': fast-import.c:995: error: `SHA_CTX' undeclared (first use in this function) fast-import.c:995: error: (Each undeclared identifier is reported only once fast-import.c:995: error: for each function it appears in.) fast-import.c:995: error: parse error before "c" fast-import.c:1000: warning: implicit declaration of function `SHA1_Init' fast-import.c:1000: error: `c' undeclared (first use in this function) fast-import.c:1001: warning: implicit declaration of function `SHA1_Update' fast-import.c:1003: warning: implicit declaration of function `SHA1_Final' fast-import.c: At top level: fast-import.c:1118: error: parse error before "SHA_CTX" fast-import.c: In function `truncate_pack': fast-import.c:1120: error: `to' undeclared (first use in this function) fast-import.c:1126: error: dereferencing pointer to incomplete type fast-import.c:1127: error: dereferencing pointer to incomplete type fast-import.c:1128: error: dereferencing pointer to incomplete type fast-import.c:1128: error: `ctx' undeclared (first use in this function) fast-import.c: In function `stream_blob': fast-import.c:1140: error: `SHA_CTX' undeclared (first use in this function) fast-import.c:1140: error: parse error before "c" fast-import.c:1154: error: `pack_file_ctx' undeclared (first use in this functio n) fast-import.c:1154: error: dereferencing pointer to incomplete type fast-import.c:1160: error: `c' undeclared (first use in this function) make: *** [fast-import.o] Error 1 I'm guessing that most of these errors are due to the iconv.h and openssl files which apparently are missing, but I can't figure out how I'm supposed to install those (if I am), or if there is some other way to get around this.

  Read the article

• Install IIS on Server 2003 unattended via PowerShell as a service user (no terminal session)

  - by maik

  I've been racking my brain with this for a bit and figured I would ask here to see if anyone could enlighten me. As the title says, I'm trying to install the IIS role on Server 2003 using an unattended install method launched via a service. We're using RightScale and most of what we want to accomplish is pretty straightforward. I created an unattend file for use with sysocmgr.exe: [Components] iis_common = ON iis_www = ON iis_www_vdir_scripts = ON iis_inetmgr = ON fp_extensions = ON iis_ftp = ON And I invoke it like so: sysocmgr.exe /i:%windir%\inf\sysoc.inf /u:C:\path\to\iis-unattend.txt /r /x /q If I run that from a command prompt while logged in as Administrator it works just fine, but if it runs via RightScript (the RightScale user on the server, which is a local admin) it fails somewhere in the middle and the logs I get are rather unhelpful. The thing is I can do this same thing with the SNMP Client (which is a Windows component, not a server role) and it works with no problems while run via the script service user. My best guess is that sysocmgr.exe is expecting a GUI element to be there during the role installation and since the service user has no terminal session it coughs and dies. That's just a wild stab in the dark.

  Read the article

• Shadow copy referencing invalid volume from symboliclink

  - by ccook

  I recently replaced my motherboard after the last one failed (was shorting and causing random reboots). I'm sure this was not healthy for the machine, and that a clean install would do wonders, but I'd like to fix the current install. That aside, I've been tracking down a pair of errors in the application log. Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details IVssSnapshotProvider::QueryVolumesSupportedForSnapshots(ProviderId,29,...) [hr = 0x80042302, A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. ]. Operation: Query volumes supported by this provider Context: Provider ID: {b5946137-7b9f-4925-af80-51abd60b20d5} Snapshot Context: 29 Followed by Volume Shadow Copy Service error: Unexpected error calling routine Error calling CreateFile on volume '\?\Volume{f4bda86e-049d-11e1-9255-bcaec56690a1}\'. hr = 0x80070020, The process cannot access the file because it is being used by another process. This error is reproducible at command line, creating the two event log entries C:\Windows\system32>vssadmin list volumes vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2005 Microsoft Corp. Error: The shadow copy provider had an unexpected error while trying to process the specified command. Using WinObj from Sysinternals, I have tracked down the global object. '\?\Volume{f4bda86e-049d-11e1-9255-bcaec56690a1}\' - SymbolicLink - '\Device\HarddiskVolume8' Running DISKPART, and running the command "list volume" within it lists volumes 0 through 6, there is not a HarddiskVolume8. How can I remove this reference to HarddiskVolume8, and get shadow copy up and running?

  Read the article

< Previous Page | 975 976 977 978 979 980 981 982 983 984 985 986  | Next Page >