Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 98/170 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• Connection drops while transferring large files to one server on a network

  - by Charlotte

  My company has two sites, each with their own LAN, using site to site VPN tunnel to connect the two sites. When transferring files (especially larger files) from site1 to site2 server1, the file transfer fails. I don't think this can be a VPN issue because transferring the same files to site2 server2 which is on the same network as server1 works fine. Pings to server1 and server2 at site2 from site1 are about the same, mostly 19/20ms with the odd one up to 50ms. As server1 is DB server with a high load I thought the NIC maybe overloaded, but a transfer from site2 server1 to site2 server2 works fine, and that uses the same NIC on server1 as transfers from site1 to site2 server1. The servers are both Windows Server 2003 VMs with VMXNET 3 NICs. Site2 Server1 route print: IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 28 9b ...... vmxnet3 Ethernet Adapter #2 0x10004 ...00 50 56 99 18 97 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.18 10 10.10.10.0 255.255.255.0 10.10.10.70 10.10.10.70 10 10.10.10.70 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.18 172.20.10.18 10 172.20.10.18 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.18 172.20.10.18 10 224.0.0.0 240.0.0.0 10.10.10.70 10.10.10.70 10 224.0.0.0 240.0.0.0 172.20.10.18 172.20.10.18 10 255.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 1 255.255.255.255 255.255.255.255 172.20.10.18 172.20.10.18 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site2 Server2 route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 15 00 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.114 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.114 172.20.10.114 10 172.20.10.114 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.114 172.20.10.114 10 224.0.0.0 240.0.0.0 172.20.10.114 172.20.10.114 10 255.255.255.255 255.255.255.255 172.20.10.114 172.20.10.114 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site1 Server route print: =========================================================================== Interface List 14...00 50 56 93 00 0b ......vmxnet3 Ethernet Adapter #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.168.1 192.168.168.118 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.168.0 255.255.255.0 On-link 192.168.168.118 261 192.168.168.118 255.255.255.255 On-link 192.168.168.118 261 192.168.168.255 255.255.255.255 On-link 192.168.168.118 261 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.168.118 261 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.168.118 261 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.168.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 261 fe80::/64 On-link 14 261 fe80::3c6b:996f:ef36:ee76/128 On-link 1 306 ff00::/8 On-link 14 261 ff00::/8 On-link =========================================================================== Persistent Routes: None tracert from site1 to site2 server1: Tracing route to server1 [172.20.10.18] over a maximum of 30 hops: 1 19 ms 19 ms 19 ms server1 [172.20.10.18] Trace complete. tracert from site2 server1 to site1: When this was run it went to the external IP of site2, then to a couple of external ips of the isp, then times out. Can anyone suggest any troubleshooting steps? Thanks, Charlotte.

  Read the article

• Triple boot Windows XP, Ubuntu, & Mac on Acer z5g notebook

  - by Yadnesh

  I'm planning to install Mac OS X using these instructions http://basshead.wordpress.com/2010/04/04/snow-leopard-on-acer-aspire-one-aoa150zg5/ on my Acer z5g notebook I have Windows XP & Ubuntu 11.04 dual booting on it perfectly fine. My question is how do I make triple boot system? What exactly do I need to do for this? Do I need to tweak grub for that? I'm going to create 30GB partition for MAC OS X. Is it correct thing to do?

  Read the article

• Linux HA - Best Heartbeat hardware solution

  - by Martino Dino

  Hi all I would ask anyone what is the best layer 2 medium for heartbeat in Linux and how it's best configured. More precisely I've been thinking about a dedicated NIC for that purpose but then i thought that if a switch breaks then i would loose the heartbeat connection for most of the cluster and STONITH 'BUM'!!! Will probably loose my job after :) Distributing the heartbeat onto the main NICs of every node trough a vif sounds reasonable but im not sure if this is the best option (at least the switches are redundant to some extent). Is it possible to use heartbeat over a bonded interface and that sounds reasonable? Do you have any other tip/solution for that issue?

  Read the article

• Windows doesn't boot after Ubuntu installation

  - by Diogo Garcia

  I have had serious problems installing Ubuntu and Windows and have dual boot. Recently I installed both operating systems, Ubuntu was the last one, and after that my computer was booting directly to Windows 7. I used my Ubuntu USB live to repair the grub, and could repair. Now I initiate my pc with grub 1.99 and Ubuntu and Windows are recognized, but Windows gives an error and don't initiate, suggesting to use Windows DVD to repair the grub. I tried that but with no effects on be behavior. I have a new asus n56vm. This conflicts with gpt and mbr have been a huge pain to me. I don't know what to to, I installed Ubuntu and Windows numerous times since I bought this computer 2 weeks ago.

  Read the article

• Intel 82576 Network card

  - by No1_Melman

  I have an Intel dual port pcie NIC card with two 82576 interfaces according to ubuntu 12.04. I run the command sudo lshw -html > /home/melman/Documents/hardware.html and it shows both of the interfaces but they're grayed out?! How can enable them? ifconfig output: bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.100.2 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr e0:69:95:d1:db:ff inet addr:192.168.10.63 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::e269:95ff:fed1:dbff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2903 errors:0 dropped:0 overruns:0 frame:0 TX packets:2627 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1524738 (1.5 MB) TX bytes:430196 (430.1 KB) Interrupt:20 Memory:f7f00000-f7f20000 eth3 Link encap:Ethernet HWaddr 00:50:b6:50:a7:f9 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:1b:21:6e:99:77 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c00000-f7c20000 eth5 Link encap:Ethernet HWaddr 00:1b:21:6e:99:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c20000-f7c40000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:246 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17584 (17.5 KB) TX bytes:17584 (17.5 KB)

  Read the article

• On an unencrypted public wi-fi hotspot, what exactly is a packet sniffer doing to get another computer's packet?

  - by hal10001

  I get mixed results when reading information security articles, some of them stating that in order to do something similar you need to also setup some sort of honeypot with a running access point and local Web server to intercept traffic. Then other articles seem to indicate you don't need that, and you can just run Wireshark, and it will detect all packets being sent on the network. How could that be, and what exactly is a packet sniffer doing to get those packets? Does this involve intercepting wireless signals transmitted over the wireless protocol and frequency via the NIC on the computer running a program like Wireshark?

  Read the article

• How to install network drivers during installation?

  - by Matt

  I have a server that I'm attempting to install windows onto. However, the disk is an iscsi target provided by ipxe. Everything appears to go well until about 3/4 through the install process I get an error about a critical driver missing and the installation is cancelled. I would say the critical driver would be the network card. It's an intel nic and the drivers are not on the windows installation CD. I tried slipstreaming them with RTSevenLite, but after it created the CD it seems it failed to make it bootable. I've also not been successful in making a bootable USB thumb drive or USB HDD. I suspect a buggy bios even though I have the latest. How to install network drivers during installation? Windows used to provide an optional F6 during install feature but this seems to be missing in Windows Servert 2008. Perhaps there is a way to do this, or another method?

  Read the article

• trying to connect to non-standard port over esxi guest network

  - by user52874

  I've got an exsi 5.5 box that has a redhat 6.5 guest and a win7 guest. The guest nics are connected on a vsphere standard switch. There is no connection from the vswitch to an outside physical nic. I can ping between the two boxes, each way. I can successfully psping redhat:22 from the win7 box. I can successfully tcping win7:139 from the redhat box. All firewalls are down on both boxes. I cannot connect from the win7 box to redhat:8003, either via psping redhat:8003, nor telnet redhat 8003, nor by the application client itself. sudo netstat -patn | grep 8003 on the redhat box shows that it's listening on 0.0.0.0. Any thoughts? suggestions?

  Read the article

• vSphere ESX 5.5 hosts cannot connect to NFS Server

  - by Gerald

  Summary: My problem is I cannot use the QNAP NFS Server as an NFS datastore from my ESX hosts despite the hosts being able to ping it. I'm utilising a vDS with LACP uplinks for all my network traffic (including NFS) and a subnet for each vmkernel adapter. Setup: I'm evaluating vSphere and I've got two vSphere ESX 5.5 hosts (node1 and node2) and each one has 4x NICs. I've teamed them all up using LACP/802.3ad with my switch and then created a distributed switch between the two hosts with each host's LAG as the uplink. All my networking is going through the distributed switch, ideally, I want to take advantage of DRS and the redundancy. I have a domain controller VM ("Central") and vCenter VM ("vCenter") running on node1 (using node1's local datastore) with both hosts attached to the vCenter instance. Both hosts are in a vCenter datacenter and a cluster with HA and DRS currently disabled. I have a QNAP TS-669 Pro (Version 4.0.3) (TS-x69 series is on VMware Storage HCL) which I want to use as the NFS server for my NFS datastore, it has 2x NICs teamed together using 802.3ad with my switch. vmkernel.log: The error from the host's vmkernel.log is not very useful: NFS: 157: Command: (mount) Server: (10.1.2.100) IP: (10.1.2.100) Path: (/VM) Label (datastoreNAS) Options: (None) cpu9:67402)StorageApdHandler: 698: APD Handle 509bc29f-13556457 Created with lock[StorageApd0x411121] cpu10:67402)StorageApdHandler: 745: Freeing APD Handle [509bc29f-13556457] cpu10:67402)StorageApdHandler: 808: APD Handle freed! cpu10:67402)NFS: 168: NFS mount 10.1.2.100:/VM failed: Unable to connect to NFS server. Network Setup: Here is my distributed switch setup (JPG). Here are my networks. 10.1.1.0/24 VM Management (VLAN 11) 10.1.2.0/24 Storage Network (NFS, VLAN 12) 10.1.3.0/24 VM vMotion (VLAN 13) 10.1.4.0/24 VM Fault Tolerance (VLAN 14) 10.2.0.0/24 VM's Network (VLAN 20) vSphere addresses 10.1.1.1 node1 Management 10.1.1.2 node2 Management 10.1.2.1 node1 vmkernel (For NFS) 10.1.2.2 node2 vmkernel (For NFS) etc. Other addresses 10.1.2.100 QNAP TS-669 (NFS Server) 10.2.0.1 Domain Controller (VM on node1) 10.2.0.2 vCenter (VM on node1) I'm using a Cisco SRW2024P Layer-2 switch (Jumboframes enabled) with the following setup: LACP LAG1 for node1 (Ports 1 through 4) setup as VLAN trunk for VLANs 11-14,20 LACP LAG2 for my router (Ports 5 through 8) setup as VLAN trunk for VLANs 11-14,20 LACP LAG3 for node2 (Ports 9 through 12) setup as VLAN trunk for VLANs 11-14,20 LACP LAG4 for the QNAP (Ports 23 and 24) setup to accept untagged traffic into VLAN 12 Each subnet is routable to another, although, connections to the NFS server from vmk1 shouldn't need it. All other traffic (vSphere Web Client, RDP etc.) goes through this setup fine. I tested the QNAP NFS server beforehand using ESX host VMs atop of a VMware Workstation setup with a dedicated physical NIC and it had no problems. The ACL on the NFS Server share is permissive and allows all subnet ranges full access to the share. I can ping the QNAP from node1 vmk1, the adapter that should be used to NFS: ~ # vmkping -I vmk1 10.1.2.100 PING 10.1.2.100 (10.1.2.100): 56 data bytes 64 bytes from 10.1.2.100: icmp_seq=0 ttl=64 time=0.371 ms 64 bytes from 10.1.2.100: icmp_seq=1 ttl=64 time=0.161 ms 64 bytes from 10.1.2.100: icmp_seq=2 ttl=64 time=0.241 ms Netcat does not throw an error: ~ # nc -z 10.1.2.100 2049 Connection to 10.1.2.100 2049 port [tcp/nfs] succeeded! The routing table of node1: ~ # esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface 10.1.1.0 255.255.255.0 Local Subnet vmk0 10.1.2.0 255.255.255.0 Local Subnet vmk1 10.1.3.0 255.255.255.0 Local Subnet vmk2 10.1.4.0 255.255.255.0 Local Subnet vmk3 default 0.0.0.0 10.1.1.254 vmk0 VM Kernel NIC info ~ # esxcfg-vmknic -l Interface Port Group/DVPort IP Family IP Address Netmask Broadcast MAC Address MTU TSO MSS Enabled Type vmk0 133 IPv4 10.1.1.1 255.255.255.0 10.1.1.255 00:50:56:66:8e:5f 1500 65535 true STATIC vmk0 133 IPv6 fe80::250:56ff:fe66:8e5f 64 00:50:56:66:8e:5f 1500 65535 true STATIC, PREFERRED vmk1 164 IPv4 10.1.2.1 255.255.255.0 10.1.2.255 00:50:56:68:f5:1f 1500 65535 true STATIC vmk1 164 IPv6 fe80::250:56ff:fe68:f51f 64 00:50:56:68:f5:1f 1500 65535 true STATIC, PREFERRED vmk2 196 IPv4 10.1.3.1 255.255.255.0 10.1.3.255 00:50:56:66:18:95 1500 65535 true STATIC vmk2 196 IPv6 fe80::250:56ff:fe66:1895 64 00:50:56:66:18:95 1500 65535 true STATIC, PREFERRED vmk3 228 IPv4 10.1.4.1 255.255.255.0 10.1.4.255 00:50:56:72:e6:ca 1500 65535 true STATIC vmk3 228 IPv6 fe80::250:56ff:fe72:e6ca 64 00:50:56:72:e6:ca 1500 65535 true STATIC, PREFERRED Things I've tried/checked: I'm not using DNS names to connect to the NFS server. Checked MTU. Set to 9000 for vmk1, dvSwitch and Cisco switch and QNAP. Moved QNAP onto VLAN 11 (VM Management, vmk0) and gave it an appropriate address, still had same issue. Changed back afterwards of course. Tried initiating the connection of NAS datastore from vSphere Client (Connected to vCenter or directly to host), vSphere Web Client and the host's ESX Shell. All resulted in the same problem. Tried a path name of "VM", "/VM" and "/share/VM" despite not even having a connection to server. I plugged in a linux system (10.1.2.123) into a switch port configured for VLAN 12 and tried mounting the NFS share 10.1.2.100:/VM, it worked successfully and I had read-write access to it I tried disabling the firewall on the ESX host esxcli network firewall set --enabled false I'm out of ideas on what to try next. The things I'm doing differently from my VMware Workstation setup is the use of LACP with a physical switch and a virtual distributed switch between the two hosts. I'm guessing the vDS is probably the source of my troubles but I don't know how to fix this problem without eliminating it.

  Read the article

• Firefox is pounding my system what should I do

  - by nikhil

  I'm running the latest version of firefox 17.0.1 on ubuntu 12.10 on a Acer Aspire One 722 Netbook. It has an amd dual core C60 processor and 2GB RAM. As you can see, firefox is absolutely killing my system, it responds really slowly and opening tabs is a royal pain. I have on an average 4-5 open tabs at a given time. Is there something that I can do to make my browsing experience more zippy? Additionally I run the following addons Firebug HTTPS Everywhere Ad block plus

  Read the article

• RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Linux software that

  - by Deepak Narwal

  Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

  Read the article

• Verify server performance

  - by George Kesler

  I'm looking for a quick and SIMPLE way to verify that new servers are performing as expected. The most important metric is disk performance, second is network performance. I’m trying to prevent problems caused by misconfiguration of RAID arrays, NIC teaming etc. The solution should work with both physical and virtual servers. I don’t need sophisticated analysis with different workloads, just one set of benchmarks which I would run against a reference server and later compare to new ones. One problem is that most benchmarks are not giving accurate results when running on a VM.

  Read the article

• Packard Bell Easynote NJ65 not saving gamma Setup.

  - by Pablo Gomez

  Hi. There seems to be a issue with the Easynote range of PB laptops. Since Ubuntu 10.10 does not use a Xorg.conf file to save your gamma / resolution /brightness setting, everytime I turn on my laptop I have to open up a terminal window and use the x-gamma command to set it up to my personal preference. Is there a way to create a configuration file which can save that into the system everytime I load up the OS? When I used to have a Compaq Presario (an F564LA with integrated nVIDIA graphics), I could save a config. file into the system which loaded up everything on startup To those who don't know the spec's for a NJ65 laptop, I'll provide them Processor: Intel® Pentium Dual Core @ 2.2 GHZ Video: Integrated Intel® GMA 4500MHD graphics HDD: 320GB SATA RAM: 2GB DDR2

  Read the article

• Ubuntu 12.04 installer Crashed

  - by Umair Mustafa

  I downloaded Multiple times Ubuntu 12.04 and Ubuntu 12.04.1. And tried to install them using first Virtual box if it work I move to install on actual drive. I dont knw but 12.04.1 dont wanna install on my system So i downloaded 12.04 release and installed it on Virtual box and it installed perfectly then i moved on to install it as Dual OS along with windows 7 but the installer crashed just like the other version and I dont know what the heck is the problem with ubuntu OS Installers. Ubuntu really need to work on their Installer. I love Ubuntu but such things are really headache. At first I thought image was not properly so i burned on another dvd but alas no use same stupid error. Now there are 3 images of 12.04 and 2 images of 12.04.1 and none of them is working on my system. And wasted two dvds. Does anyone know how to solve this problemo.

  Read the article

• Unmet Dependencies when I try to install wine or skype

  - by Andres

  I have a dell inspiron 64 bit and I'm running both windows 7 and Ubuntu in dual boot I am having trouble installing skype and wine. When I try to install skype etc I get the following error: sudo apt-get install ia32-libs Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are Blockquote using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch but it is not installable E: Unable to correct problems, you have held broken packages

  Read the article

• Ubuntu on Mac mini and refit

  - by Thomas

  I have successfully installed Ubuntu pangolin 64 bit on a mac mini 2011 5,3 ( server version ). I have used the Ubuntu iso which I then converted to .dmg and dd'ed into an usb stick. I didn't want to keep OS X installed so I deleted the current partition and reformatted the drive as ext4 for / + a small swap partition. Everything seems to work nicely, but I have now a question since I read lots of reviews/howto when you people installed rEfit on Mac OS X. Did you use rEfit to be able to have a dual boot or there are other advantages by doing that ( apart that you will be able to download updated firmware for your hardware in the future via Mac OS ) like BIOS emulation and the like ?

  Read the article

• Removed Xserver driver. ubuntu doesnt start. what should i Do?

  - by user71576

  im new on ubuntu , i intalled it ( dual booted with windows 7) i was customizing it, but when i tried to run compiz it said that missing glx or something like that in the screen, i realized that the driver that i was not using wasnt the gefroce on so i went to nvidia downloaded the correct version for my graphic ( geforce gtm 525m) when y run the .run file it told me that i was using xserver and that i cant install this driver with the xserver installed. i search for information of how to remove or disable xserver i found one. in this web site --http://www.ubuntugeek.com/ubuntu-tiphow-to-removeinstall-and-reconfigure-xorg-without-reinstalling-ubuntu.html when i run the command , after that i tried to instal the geforce on, doesnt work so i remember windows that you must reboot after a driver unintallation or intallation so i reboot, them ubuntu doesnto load, it show the ubuntu whit the five dots like or 1-2 sec and them i get a black screen ( not the red-black of ubutntu ) so why i should do. i dont want to re install i dont have a cd and my usb is a little damaged so please if you could help me

  Read the article

• Difference in fans on Windows 7 and Ubuntu 12.04

  - by Timo

  I have bought a Hp Pavilion DV7 with Core i7 CPU and installed Ubuntu 12.04 on dual boot with Windows 7 alongside. Apart from the difference in battery life (although that's fixed with Jupiter), I have another problem with the fans. On Windows my fans work perfectly and the laptop is cool, but it seems to overheat in Ubuntu. It becomes quite hot and it looks like my fans are not working under Ubuntu. I think I'm having the same problem as How can I keep the cpu temp low?, but since I cannot comment because of the lack of reputation (?), I post the question as a new thread. I think the result of the overheating is that my keyboard doesn't seem to follow when I start typing a long text. It just freezes and types the last letter multiple times. For example: when I type the word freezes, it shows freeeee so the zes changed into eee...

  Read the article

• Ubuntu 13.04 Eclipse 3.8.1 fresh install..cannot read Eclipse help files..ideas?

  - by Mystic38

  I have recently setup a dual boot windows 7 /Ubuntu 13.04. Problem: I installed eclipse from the Ubuntu software center. Eclipse opens fine, but when i attempt to access the help i get a "server error 500".. What i know: the help file is located locally and read via the browser.. any ideas?.. nb.. novice linux user, happy to try anything to provide more data, ppls just be specific (ie assume i know zilch..) update jun 30th.. Although not an answer to this question, i have patched a working solution by removing the version of eclipse supplied by the Ubuntu software center and installing from eclipse.org.. details at http://ubuntuforums.org/showthread.php?t=2157452 thanks

  Read the article

• Upgrade to Xubuntu 11.04 Breaks Wireless

  - by fleamour

  When I tried to connect at my mother's house and then my brother's house; the little connection icon would circle forever before eventually prompting for password. I have triple checked all network keys & then some. Even with my home network I now have to revert to 10.04 LTS Lucid Lynx (dual boot) or wired Ethernet. Not even sure where to start trouble shooting TBH? My card is a Edimax EW-7108PCg PCMCIA card which I bought for it's out the box Linux compatibility. Hardware is an IBM Thinkpad T21.

  Read the article

• Unknown file system : grub Rescue

  - by Rahul Rodrigues

  I have Lenovo Y560 Laptop on which installed Windows 7 and Ubuntu 11.10 as dual boot.Due to some reason i had to recover boot loader using bootrec.exe /fixmbr and bootrec.exe /fix boot,It created one partition of size 198MB named "tet" and my both os were working fine. Ysterday while making some changes in partition table i deleted that "tets" partition and after reboot im getting following error Error:unknow filesystem grub rescue i tried to boot from windows installer cd and but it stucks at "starting windows" so not able to run commands which i have mentioned earliar and tried to boot from Ubuntu 11.10,it stucks after showing following error memory full can't kill anymore process. Please help me out

  Read the article

• Does an onboard video affect the X windows configuration?

  - by Timothy

  Does the onboard video on the motherboard affect the X windows configuration? My system has onboard and pcie video. The onboard video is a NVIDIA GeForce 7025 GPU, On Board Graphic Max. Memory Share Up to 512MB(Under OS By Turbo Cache). I have a pcie dual head video card installed with two monitors. The video card is a GeForce 8400 GS, with 512mb memory. When installing Ubuntu 12.04, only one monitor worked. When pulling up system settings- Displays it shows a laptop. This is a desktop pc. I did get both monitors to work using nvidia using twinview -- A complicated process! When checking nvidia now it shows the monitors disabled. The Nvidia X server setting does show the GPU and all the information. I was thinking it's seeing the onboard video on the motherboard. Why else would it show laptop?

  Read the article

• How to get Visual Studio 2012 working on Ubuntu 12.04.1?

  - by kamil

  I am trying to get visual studio working in Unity (via Wine) without using any virtual machine or other Desktop Environment alternatives. I am convinced Visual Studio is the ultimate IDE for .Net programming languages. I'm not necessarily for dual booting. I have been working more than 10 years on visual studio and I prefer it over other IDEs. I have tried other IDEs but they didn't work too well for me. Does anyone know a way to get this working natively?

  Read the article

• Configure Windows Routes for VPN

  - by Florin Sabau

  I have a Virtual PC/VMWare machine that runs Windows Server 2003. This virtual machine uses an IPSec VPN client program to connect to a remote network. I configured the virtual machine to have 2 NICs: NAT - to be used by the VPN Client to access the remote network Host only - to be able to access the virtual machine from the host The reason I have this setup is because I want to be able to access some remote network from the host machine. I could've installed the VPN client on the host machine, but the host runs Windows 7 and the client doesn't support it. The problem: although the virtual machine is normally reachable (ping + http access), as soon as the VPN client is started, neither of the NIC addresses are reachable anymore. I'm wondering if it is a routing problem that needs to be addressed? How do routing/VPN client connection affect the ability of the server to respond to client requests from the host?

  Read the article

• Invisible boundary on Synergy client

  - by Jayson Rowe

  I have a Desktop system (named 'desktop') with 2 monitors attached (one 1680x1050 and another 1920x1080 resolution), running a synergy server. I also have a small ITX machine (named 'tiny') to my right that has a single monitor running at 1280x1024. The dual-monitor desktop is the synergy "server" and the single monitor system is the "client". Synergy works fine with one exception; if I move the mouse to the client, I can't move my mouse below the top two-thirds of the screen - it just stops. I can grab a mouse attached to the computer, and it moves all the way down, but as soon as I touch the mouse attached to the server, it jumps back to the top of the screen. Is there an issue with my config? section: screens desktop: tiny: end section: links desktop: right = tiny tiny: left = desktop end Thanks in advance for any suggestions. +----------------------------+-----------------------------+ | | | | | | | | +-----------------+ | | | | | desktop 1680x1050 | desktop 1920x1080 | | | | | | | | | tiny 1280x1024 | | | |+---------------+| | | |XXXXXXXXXXXXXXXXX| +----------------------------+-----------------------------+-----------------+

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >