Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 98/584 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• Have optical drive connectors changed in the last year?

  - by Zippityboomba

  In early 2010 my motherboard freaked out, and I was able to drop in a new board and connect my two DVD drives that were initially bought in 2005. Tonight my new components arrived to build my next system, and I figured I'd just reuse the old DVD drives. Surprise, the long flat connector cable has no mate on the new motherboard. Reckon I'll just pick up a new DVD drive for $25, but what gives? Thanks!

  Read the article

• Backup networks

  - by MegaBrutal

  My USB Wi-Fi adapter tends to overheat and when it happens, it stops working until I pull it out and plug it in again. Since I often access my machine remotely from other places, when it happens, my machine gets inaccessible for me until I get home to fix it. I'm thinking, I have another USB Wi-Fi adapter in spare. Would it be possible to plug it in that too but tell Ubuntu to only use it when the primary Wi-Fi adapter becomes off-line? (I won't use the other Wi-Fi adapter as primary because it provides significantly less quality.)

  Read the article

• I have a "ghost drive" Local Disk (Q:) under my "Hard Disk Drives" category which cannot be deleted

  - by Fabian

  I think it happened after I connected my dad's external hard drive to my PC. Its capacity is 0 bytes, it cannot be formatted, and under Disk Management I can't find it. How do I remove it?

  Read the article

• How to access the SD card through my Sony Ericsson Xperia Arc Phone?

  - by user16364

  I have a Sony Ericsson Xperia Arc phone and I cannot access its SD card through the USB cable provided. I have set the USB connection mode to MSC yet when I connect the phone to my computer I cannot see the SD card (or anything for that matter). The Disk Utility however, does see an SEMC Mass Storage device but it says that no media was detected. I have validated that the SD card works as I removed it from the camera and plugged it into a card reader and saw all the photos and files stored on it. I have validated that the phone works as I have connected it (in MSC mode) to my wife's Windows 7 computer. Can anyone please tell me how I can access the SD card on my phone.

  Read the article

• Unable to stop TOSHIBA TransMemory

  - by user66498

  I have a USB,when I choose safety remove, occur this error message.How to solve the problem? Unable to stop TOSHIBA TransMemory Error detaching: helper exited with exit code 1: Detaching device /dev/sdb USB device: /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2) SYNCHRONIZE CACHE: synchronize cache(10): Fixed format, current; Sense key: Key=9 Additional sense: Logical unit not ready, cause not reportable Info fld=0x0 [0] FAILED: No such file or directory (Continuing despite SYNCHRONIZE CACHE failure.) STOP UNIT: start stop unit: transport: Host_status=0x07 [DID_ERROR] Driver_status=0x00 [DRIVER_OK, SUGGEST_OK] FAILED: No such file or directory

  Read the article

• How to mount NTFS drive at startup

  - by user3403

  I'm not even sure if this is the right question, but basically I have a partition with Windows 7 on it (named Acer in my Ubuntu places menu) that I have to click on every time I start the computer in order for my music to come up in Rhythmbox, since my music is stored on the windows drive. What I want to do is have the NTFS drive "Acer" mount automatically when I start the computer, so my music is there automatically.

  Read the article

• Windows 7 won't recognize my second hard drive after reinstall

  - by Shadur

  I recently suffered a total hardware crash on my windows C: drive. Fortunately, I had a spare disk on hand and set about reinstalling. For some reason, during the install it decided to declare my second windows drive as the booting drive, but once the installation was completed it completely and utterly refuses to acknowledge the filesystem -- I'm not even seeing a drive letter, while it /does/ find the linux partitions on the other two drives (even if it can't read any of them). My first (and most important) question: How can I get windows to re-acknowledge the drive, preferably without losing all the data on it? My second question: How can I tell windows to set up its boot loader on the new C: drive?

  Read the article

• if i have two external hard drives connected to my computer by USB (2.0 i think) will they load with consistent letters?

  - by Bec

  (I'm using windows-7 and the hard drives are western digital with whatever formatting they came with from the factory) i'm thinking of setting up two different back-ups one through windows and one with the software that came with the drive (because windows gives me a system image but isn't very user-friendly for my files) but will my computer get confused and load them as different letters each time?

  Read the article

• What is the replacement of the floppy

  - by alexanderpas

  While CD (and to an lesser extend DVD) disks have reached the price-point of the floppy, they have one significant downside, it is WORM (Write-Once Read-Many) media, allowing it to be used only one single time, and you need to be explicit in writing the data to the actual media (you need to burn it.) While CD-RW solves the "use only once" problem, it is still EWORM (Erasable Write-Once Read-Many) media, which still means you need to be explicit in writing the data to the actual media (you still need to burn it.), and also, you still need to be very explicit in erasing it. (simple delete is not possible.) Okay, we can use a CD-RW in Packet Writing mode, however the downside to that, is that this mode is not very universal, and also, not the native mode of the media. Now, while USB-sticks and SD-cards may not have the poblems of the CD, they have a whole other kind of problem: their PRICE! USB-sticks and SD cards are generally 10 to 100 times as expensive as diskettes per piece. SD-cards, in addition have an added problem, because they need a reader to operate. While it is a very standard thing, it is not default equipment on the computer like the CD drive or USB port (or historically the diskette drive). You wouldn't give out an USB stick or SD card with a 100 kB text file, not caring weither you would get it back or not. So, to recap: CD & DVD are basically WORM media. SD cards and USB sticks are relatively expensive. SD cards also needs special readers. Diskettes have a very low data-rate Diskettes have a very low storage capacity. Now, is there a media out there that solves all these problems, or is there a way to get (very) small USB sticks or SD cards for a very low price (as they're the closest thing to diskette).

  Read the article

• How can I pair two bluetooth dongles together?

  - by techaddict

  I want to hack a device which connects via USB, and plug a bluetooth USB dongle to the end of the USB cable (using a female to female adapter), and then connect to that device from another USB bluetooth dongle connected to my computer. How can I do this? It is straightforward? I don't want to spend $30 before I know how to do this. Also I think another concern is that the USB cable is providing power to the device. So I think that means I would also have to hack it for power. I have created this diagram in Photoshop to illustrate my intent: (NOTE: it won't be a USB mouse, as that would be pointless because there are already wireless mice in existence. The mouse is displayed for illustrative purposes) Don't tell me "it won't work". Because I KNOW it WILL work. Think for example, PS3 controller. That works, and in fact I was able to get it working with my laptop, over bluetooth. I just want to know HOW to make it work.

  Read the article

• What happens when the USB key or SD card I've installed VMware ESXi on fails?

  - by ewwhite

  An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed. I encountered some rather ominous looking messages on the vCenter console and in the HP ProLiant ILO event log... Lost connectivity to the device ... backing the boot filesystem. As a result, host configuration changes will not be saved to persistent storage. Embedded Flash/SD-CARD: Error writing media 0, physical block 848880: Stack Exception. VMware advocates the use of USB and SD (SDHC) boot devices for ESXi. It was one of the main reasons the smaller footprint ESXi was developed (versus the older ESX). I've spent much time highlighting the differences between ESXi's installable and embedded modes to coworkers and clients. However, these failures do seem to happen. In this case, this is my third instance. Luckily, this is a vSphere cluster with SAN storage. What steps should be taken to remediate this failure?

  Read the article

• Eee PC - Create USB Recovery Drive w/ Files Copied From Recovery Partition

  - by nedm

  I have an Eee PC 1005HAB whose hard disk has failed. I have no recovery CD/DVD, but I did previously back up the contents of the recovery partition, and would like to use them to create a bootable USB to reinstall the factory settings on the new hard drive. Since I simply copied all the files in the recovery partition, rather than hitting F9 during boot and running through the process to create a recovery disk or drive, how do I now use the files to create a bootable USB drive that will do the recovery? In the BIOS I have disabled boot booster and set external drives to the top of the boot priority, but simply copying all the recovery partion files to a usb doesn't allow it to be booted from. I've downloaded the HP utility for creating bootable USB drives and have tried using it to make the USB drive bootable, but I'm not sure what to do with the ghost image and utilities from the recovery partition to get the process to start properly. Thanks in advance for any help.

  Read the article

• How to prevent hard drive from spinning down Windows 7?

  - by JL.

  I had a Western Digital External 1TB drive, which I was accessing via USB. I decided one day, that I would prefer to mount the HDD in my case, and access it via SATA interface. So I took it apart, and the actual mounting was a breeze. The only thing is, I think the device has some default power saving features, which means the device tends to stop spinning when idle for (x) amount of time. This creates delays when I am accessing the HDD. Is there anyway I can turn off these power saving features for this HDD?

  Read the article

• How to find the /dev name of my USB device

  - by mustafa

  I am running Ubuntu 11 on VmWare on Windows XP. I want to format an SD card in Ubuntu. But, I can't figure out which /dev/xxx device the SD card is. I plug the card into the built-in socket of my laptop. I "safely remove" the device in Windows. Then, I "connect" the PCMCIA reader in VmWare. Now, I was supposing to see a new device like /dev/sdx. But, it doesn't appear :( How can I find what the name of my USB device's name and mount it? /var/log/message is empty. Here is the output of dmesg: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd And, here is the last lines of /var/log/syslog: Oct 31 18:51:21 ubuntu kernel: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd Oct 31 18:51:21 ubuntu mtp-probe: checking bus 2, device 12: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1" Oct 31 18:51:21 ubuntu mtp-probe: bus: 2, device: 12 was not an MTP device

  Read the article

• What Filesystem should be used for a 4TB drive for both Windows and OSX compatibility? [closed]

  - by Nicholas Yost

  Note: I am aware of similar questions. The one's I seen here are for Windows, OSX, and Linux (which I do not need). I also can use Mountain Lion, which the other questions did not mention. I was going to use NTFS, but OSX Mountain Lion can only read that filesystem and not write to it for some reason. I want to use something native between OSX and Windows, as I don't want to risk losing the data over filesystem incompatibilities. I have USB 3.0 and want something that will allow files greater than 4GB. I do not mind installing a small set of drivers on the Windows machine(s), but I would strongly prefer to leave the Mac machine untouched. Thanks!

  Read the article

• How to partition Seagate FreeAgent GoFlex 2TB hard disk?

  - by balki

  Hi I bought a new Seagate 2TB external hard disk. I opened the drive's application in my virtual windows, did product registration using the application present in it. I have few questions on how best to use it. The drive by default has some files and folders - setup.exe, System Volume Information, USB 3.0 PC Card Adapter etc,. I copied all the files to my laptop. Is it safe to delete these files? It has a dash board for windows which allows to tune power options, test the drive etc. Will I be able to use the dash board if I put back all these files and mount on windows again? I want to partition and format the hard disk. Data I like to store is Around 10 to 20 GB Files - Virtual box images. Around 4GB Files - Dvd images. Other Movies and personal Files. What is the best filesystem to store very huge files like 10 to 20GB files. So that they are written and accessed fast also best uses the drive's capacity. If I leave one of the partition as ntfs and others to different files systems, will it be able to mount on windows and Will I be able to use the device's dash board? Note: I dont need any encryption for my data. Any other advice on using the hard disk is also welcome.

  Read the article

• linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

  - by devicerandom

  We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

  Read the article

• Mapped networkdrive on logout

  - by Robuust

  I'm using a script to keep a mapped networkconnection alive, but ofcourse the mapped connection is gone when I logout. The point is now, that I'm running this on Windows Server 2008 R2, where I use remote desktop to login on the administrator account. However, it should remain logged in and not remove the mapped connection as this script takes care of not logging out on MS office 365 sharepoint. Is there a way to keep the mapped networklocation (L:) available after logout? So the script can run to remain the connection? # Create an IE Object and navigate to my SharePoint Site $ie = New-Object -ComObject InternetExplorer.Application $ie.navigate('https://xxx.sharepoint.com/') # Don't need the object anymore, so let's close it to free up some memory $ie.Quit() # Just in case there was a problem with the web client service # I am going to stop and start it, you could potentially remove this # part if you want. I like it just because it takes out a step of # troubleshooting if I'm having problems. Stop-Service WebClient Start-Service WebClient # We are going to set the $Drive variable here, this is just # going to tell the command what drive letter to map you can # change this to whatever you want (if you change it to a # drive that is already mapped it will overwrite it, so be careful. $Drive = "L:" # You can change the drive destiniation to whatever you want, # it has to be a document library or folder of course. $DrvDest = "https://xxx.sharepoint.com/files/" # Here is where we create the object to map the network drive and # then map the network drive $net = New-Object -ComObject WScript.Network; $net.mapnetworkdrive($Drive,$DrvDest) # That is the end of the script, now schedule this with task # scheduler and every so often and you should be set.

  Read the article

• How can I control disk numbering (enumeration) in Windows 7 Disk Management?

  - by tim11g

  A desktop system had two drives (Assigned C and D, which were enumerated in Disk Management as Disk 0 and Disk 1). A new SSD was added as the boot drive, after copying the C drive to the SSD. The SSD was connected to SATA 0 (master) port on the motherboard. The previous C Drive was moved to SATA 2 and is reformatted as a non-booting NTFS partition. The D drive remained on SATA 1. The system boots and everything seems fine. I was able to manually adjust the Drive Letters. However, the list in Disk Management is re-ordered. Disk 0 is the the previous Disk 2 (D Drive) on SATA 1, Disk 1 is the new Boot Drive (now C) on SATA 0, and Disk 2 is the former C Drive (now assigned E) on SATA 2. Does the Disk 0, 1, 2, designation mean anything? I would prefer to have them display in Disk Management as Drives C, D, and E from top to bottom. Is the Disk enumeration based on the SATA port or something else? (If it was based on SATA Port, they should be ordered C, D, E. Is there any way to re-order the Disk number assignments? What actually does determine the Disk number enumeration?

  Read the article

• Recover data from physically damaged harddrive. What are my options?

  - by Michael Kniskern

  I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a physically damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are. Update I took the HD to Data Doctors, and they told me that the SATA connection was broken to they would need to replaced the data connector and then copy the data to a brand new hard drive. So, with the initial analysis, cost of replacement parts, and data recovery fee it came out to $865.00 USD. The technician specifically stated if this was an older hard drive that would just need to replace the data connector. But because there is specific information related to the individual hard drive in the flash ROM, they need to transfer the data to a brand new hard drive.

  Read the article

• RAID controller dropping the wrong drive

  - by bramp

  I've been having an issue with 3ware 9500S-8 RAID 10, and I have contracted their tech support, but I wanted to hear the serverfault community's recommendations. Firstly, all my data is backuped and secure, so I don't mind blowing my RAID away if I have to. But let me describe the problem I've been seeing. A month ago, disk 6 dropped out of the RAID. It is mirrored with disk 7, so I wasn't that bothered. I went to the data centre and replaced it. When I got back to the office, I noticed that disk 6 will still not in the RAID, and in fact the controller was show the name of the old drive still. A week later I went back and replace the drive again, thinking I might have swapped in a bad drive. Still the same problem. I decided to reboot the machine, to see if that would "force" the controller into seeing the new drive. It did, and a rebuild started to happen (from disk 7). Eventually both drives were showing as good. A week later, the MySQL database has flagged the database is corrupt, and is unable to repair it. I don't know what has gone wrong, but I suspected this 6-7 pair. At this point I noticed that the RAID had constantly been verifying itself, over and over. Regardless of this I began to rebuild the database, which took about 19 hours. It's a big database. Near the end of the repair, the RAID controller told me it had dropped disk 7, and that some data was most likely corrupted. I contacted LSI tech support, and they very promptly started to help me. I mentioned that drive 7 had been dropped. They suspect that drive 7 was always at fault, and drive 6 had always been good. I want to know how often a RAID controller would drop the wrong drive (in this case dropping drive 6 a month ago, instead of 7). I foolishly didn't run smartctl on the drives before I started swapping them out. I just assumed the RAID controller knew what it was talking about. I think my plan of action is to replace drive 7, rebuild the array from scratch, double check smartctl on ALL the disks, and then start restoring my data again. I would appreciate anyone's input on what the correct procedure for swapping drives is, and how often failures like this happen. If anyone would like more information then I'd be happy to provide it. thanks in advance. Oh some more information. I'm running CentOS 5.3, with two RAID arrays, a simple RAID 1 for the OS, and RAID 10 for the database. Both arrays are on different controllers. The RAID 10 is made of 10 identical ST3640323AS drives, until I swapped in a SAMSUNG HD103SJ last month.

  Read the article

• How is the extra mSATA SSD disk used/configured in a Dell XPS laptop?

  - by Mark

  Some machines in the new XPS laptop range from Dell come with a regular, large (500GB+) HDD and an additional 32GB m-SATA SSD. The only detail I can find about this extra drive on the Dell site is this: Store your important files, multimedia and photos with XPS 15’s large hard drive options. To get instant access to your media, choose an optional mSATA solid-state drive (SSD) that can boot up to twice as fast as a regular hard drive and resumes in less than 1 second. I'd like to know more about how this extra drive is set up and used, specifically: Is anything installed on it (e.g. OS files or a boot loader) or is it just used as swap space? Is the m-SATA drive visible as a lettered drive in Windows? (I'd guess not if it's used for swap file only.) Is this unusual configuration likely to cause any problems later down the line - e.g. when upgrading to Windows 8? As usual, Dell's sales team haven't been able to help. If anyone's actually got a Dell machine with this or a similar hard drive set-up and can give a definitive answer rather than speculation I'll accept the answer.

  Read the article

• Is there an RSM replacement in Windows 7? (to eject USB and Firewire devices from command line)

  - by Jay

  I know Windows XP and previous had an rsm.exe file in the <root>\windows\system32 folder that could be used to manage media. I used this command in batch files and from the command line to eject external disks (iPod, CF cardreader, etc.). This utility appears not to be included in Windows 7, and I wonder if there is some replacement utility that will allow the same thing. I've been unable to find any such thing. I'm aware of the 3rd party utilities; this question is only about what is included with Windows 7.

  Read the article

• Windows XP-64 loses audio sounds, drive letters... why?

  - by Ira Baxter

  Until sometime in early December, I had a wonderfully functioning XP-64 system. It was configured to auto download/install MS patches. I occassionally update the software on it, e.g. Open Office, Adobe Reader, Skype, but I don't fetch hundreds of tools or anything much beyond what I just mentioned. In December, suddenly my audio stopped, and drive letters assigned to various mount points on other machines quit being available. Apparantly, the services that support these (and some others) are now not starting up when I boot/login. There isn't anything obvious in the event log. If I manually restart the associated services, these facilities come back on line and work for awhile (a day) but pretty soon the problem reappears. I don't reboot very often, nor do I log out out much. Hints?

  Read the article

• Can I rebuild degraded RAID1 on a SAS 5 i controller with a larger mirror drive size?

  - by Kenny

  A drive failed on a Dell SAS 5i controller - see controller bios screengrab: http://imagebin.ca/view/SkZbszA.html The primary is a 160GB 10k sata drive. I added a 250GB 7k rpm drive in the hope that the array would rebuild onto this drive. This did not happen. (assuming that the controller would just operate at the speed of the slowest drive) The controller could see the new drive, but it didn't automatically rebuild the raid1 onto this drive. (my assumption is that it did not do this rebuild as the drive sizes are different). There was an option to add the new drive to the existing raid1 array - but when I tried this a message appeared stating that all data on the array would be lost. (I didn't get a screenshot of this message, I will later) Should the SAS 5i allow me to rebuild the array onto a larger drive? Is the option to add the drive to the array the right way to go? Many thanks!

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >