Search Results

Search found 131484 results on 5260 pages for 'windows home server'.

Page 98/5260 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• Windows Setup could not configure Windows to run on this computer's hardware

  - by Hello71

  The whole installation goes smoothly up to the point of "Completing installation ...". The monitor changes resolution, after which a standard dialog box pops up saying Windows Setup could not configure Windows to run on this computer's hardware Then, in a few seconds, the whole machine powers down. Trying to restart produces the message: STOP: c000021a {Fatal System Error} 0x00000000 (0xc0000001 0x00100448) OR it boots into Setup and comes up with the message: Windows Setup encountered an unexpected error... (This is not the actual error, just paraphrasing) I tried using the OEM restore instead of a regular install, but it fails with the same error. (Even though it worked before...) General specs: HP Pavilion Elite e9262f Intel Core i5-750 Processor ATI Radeon HD 4650 Hitachi HDT721010SLA360 ATA Device 6GB DDR3 RAM SuperMulti DVD Burner with LightScribe Some built-in Wi-Fi module http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917 I've tried disconnecting the wireless card and disabling the built-in Ethernet and Firewire via the BIOS, and replacing the wireless keyboard and mouse with wired USB ones. Didn't work. I've also tried changing the SATA controller settings in the BIOS to RAID, AHCI, and IDE, reinstalling each time I changed. Still not working. I think the reason why it is showing the Fatal System Error is because it didn't finish installing before it errored out and shut down, so the system is left in an inconsistent state. I've tried 3 different copies (including the OEM restore) of Windows 7 now, and they're all failing at the same point, with the same error message. I've tried to install Windows 7 maybe 10 times already, with the exact same error message at the exact same location. Hm... Interestingly, the 32-bit version of Windows 7 works, but the 64-bit version doesn't. Perhaps it was a badly burned disk? Reburning the 64-bit version still comes up with the same error. Here's a picture of the side of the case that clearly says it came with Windows 7 64-bit, along with the model number and CPU. sudo fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009896f Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 7 HPFS/NTFS /dev/sda2 14 94119 755906445 7 HPFS/NTFS /dev/sda3 119922 121602 13492224 7 HPFS/NTFS /dev/sda4 94120 119922 207257740+ 5 Extended /dev/sda5 119527 119922 3170769 82 Linux swap / Solaris /dev/sda6 107174 119526 99225441 83 Linux /dev/sda7 94120 107173 104856192 7 HPFS/NTFS Partition table entries are not in disk order

  Read the article

• I need advice about iscsi + zfs(or ntfs) + windows 2008 clustering

  - by Fatih

  I want to setup a storage farm with iSCSI. I have 2 cluster node machine, 1 iscsi target machine that has 8TB installed as RAID 10. The capacity is now 8TB, but I'll upgrade the capacity in future. Let's say, I installed clusters as file server, and I connected these servers to iscsi target, then I shared 8TB capacity as an only folder to the windows users. Users now see only a folder whose capacity is 8TB. But if I want to add another 8TB to expand the main capacity, the users must not see the second folder for this new 8 TB. The users must see only a folder as before, but this time this folder's capacity expanded to 16TB. And so on, if I add another 8TB, the users must deal with only a folder. For this purpose, I've learnt that ZFS can expand its size without a problem. So if I use ZFS as a file system on iSCSI luns, how can the cluster machines see the ZFS. Because the cluster machines have windows 2008. Is there another way to expand the size of shared folder without a problem? Does ntfs support it?

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• How can adding a server to a domain cause Remote Desktop to stop working?

  - by Adrian Grigore

  I have two dedicated with Windows 2008 R2 servers which I am using for Web hosting. One Server A is a domain controller, Server B should simply be added to the domain controlled by Server A. So I RDP'd into Server B and changed the system settings so that Server B is part of that domain. I entered my domain admin credentials, was welcomed to the domain and asked to reboot the server. So far everything seemed to work smoothly After rebooting, I could not open an RDP connection to Server B anymore: Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled. I restored an older backup of Server B and switched off the firewall before adding the server to my domain. But the problem reoccurred just the same. What could be the reason for this? The domain is brandnew and I did not change any of the default settings. Could this be some kind of domain-wide default policy that shuts down RDP on any domain clients? Or perhaps it has to do with the fact that Server B is virtual? Thanks for your help, Adrian

  Read the article

• unable to destroy windows 2008 r2 failover cluster after SAN rebuild

  - by Zack

  I created a windows 2008 r2 failover cluster for a sql 2008 active/passive cluster. This two node cluster was using a SAN device for a quorum disk resource as well as MSDTC resource. Well....I decided to reconfigure the SAN device, but I didn't destroy the cluster first. Now that the quorum disk and mstdc disk are completely gone, the cluster is obviously not working. But, I can't even destroy the cluster and start again. I've tried from the Windows Clustering tool, as well as the command line. I was able to get the cluster service to start using the "/fixquorum" parameter. After doing this I was able to remove the passive node from the cluster, but it wouldn't let me destroy the cluster because the default resource group and msdtc are still attached as resources. I tried to delete these resources from both the GUI tool, as well as command line. It will either freeze for several minutes and crash the program, or once it even BSOD'd the server. Can someone advise on how to destroy this cluster so I can start over?

  Read the article

• What are the possible disadvantages of enabling the "data access" server option in sys.servers for t

  - by Corp. Hicks

  We plan to change the default server options of an SQL2k5 server instance by enabling data access. The reason is that we want to run "SELECT * FROM OPENQUERY(LOCALSERVER, '...')" -like statements on the server. What are the possible disadvantages of enabling server option "data access" (alias sys.servers.is_data_access_enabled) for the local server (sys.servers.server_id = 0)? (There must be a reason for MS setting this option to disabled by default...) EDIT: it turns out that I'm not the first person to ask this question: http://sqlblogcasts.com/blogs/piotr_rodak/archive/2009/11/22/data-access-setting-on-local-server.aspx "The DATA ACCESS server option is not very well documented in my opinion - the Books On Line say it is a property of linked servers. It doesn't mention at all that you actually can have it enabled on your local server to enable OPENQUERY calls. I noticed that when you disable DATA ACCESS on a linked server, you can't query any table located on it (I tested it on my loopback server) neither using OPENQUERY nor four-part naming convention. You can still call procedures (with four-part naming) that return rowsets. Well, the interesting question is why it is disabled by default on local server - I suppose to discourage users from using OPENQUERY against it." It also seems that the author of the post (Pjotr Rodak) is a Stack Overflow user :-)

  Read the article

• Windows Domain Chaos - Any Solving Approach

  - by Chake

  we are running an old Window 2003 Server as Domain Controller (DC2003). To safely migrate to Windows 2008 R2 we added a 2008 R2 (DC2008R2) to the domain as domain controller (adprep etc.). After dcpromo on DC2008R2 everything seemed to be ok. The new DC appeared under the "Domain Controlelrs" node. It wasn't checked at this time, if DC2008R2 can REALLY act as domain controller. Later we tried to shutdown DC2003 and ran into a total mess with non functional Exchange and Team Foundation Services. After that I got the job to fix... First i thought it could be an Problem with DC2008R2. So I removed it as Domain Controller and installed a new Windows 2008 R8 Server DC2008R2-2. I ran into similar Problems. I tried a bunch of stuff, but nothign helped. I won't list it, maybe I made an mistake, so I'm willing to redo it with your suggestions. To have a starting point I tried the best practise analyser whicht ended up with 24 "Compatible" and 26 "Not Compatible" tests. From these 26 tests 19 read the same. (I'm translating from german, so that may to be the exact wording) Problem: Using the Best Practise Analyser for Active Directory Domain Services (Active Directory Domain Services Best Practices Analyzer, AD DS BPA) no data can be be gathered using the name of the forest and the domain controller DC2008R2-2. I appreciate any suggestions, this really bothers me.

  Read the article

• HP Proliant DL380 G4 - Can this server still perform in 2011?

  - by BSchriver

  Can the HP Proliant DL380 G4 series server still perform at high a quality in the 2011 IT world? This may sound like a weird question but we are a very small company whose primary business is NOT IT related. So my IT dollars have to stretch a long way. I am in need of a good web and database server. The load and demand for a while will be fairly low so I am not looking nor do I have the money to buy a brand new HP Dl380 G7 series box for $6K. While searching around today I found a company in ATL that buys servers off business leases and then stripes them down to parts. They clean, check and test each part and then custom "rebuild" the server based on whatever specs you request. The interesting thing is they also provide a 3-year warranty on all their servers they sell. I am contemplating buying two of the following: HP Proliant DL380 G4 Dual (2) Intel Xeon 3.6 GHz 800Mhz 1MB Cache processors 8GB PC3200R ECC Memory 6 x 73GB U320 15K rpm SCSI drives Smart Array 6i Card Dual Power Supplies Plus the usual cdrom, dual nic, etc... All this for $750 each or $1500 for two pretty nicely equipped servers. The price then jumps up on the next model up which is the G5 series. It goes from $750 to like $2000 for a comparable server. I just do not have $4000 to buy two servers right now. So back to my original question, if I load Windows 2008 R2 Server and IIS 7 on one of the machines and Windows 2008 R2 server and MS SQL 2008 R2 Server on another machine, what kind of performance might I expect to see from these machines? The facts is this series is now 3 versions behind the G7's and this series of server was built when Windows 200 Server was the dominant OS and Windows 2003 Server was just coming out. If you are running Windows 2008 R2 Server on a G4 with similar or less specs I would love to hear what your performance is like.

  Read the article

• Windows Server 2008 is stuck at "configuring updates - stage 3 of 3 - 0% complete"

  - by Chris

  This has happened the last two times I've done updates to this system, and I really have no idea what is going on. It is installing a only a month's worth of updates. It only responds to ping and no services are up, so I can't view the system remotely (I have to hook up a monitor to see this message). In the past I've just restarted the system at this point and it eventually finishes updating. I want to know what I can do to avoid this situation, how to diagnose what is going on, and how to get any kind of remote access during the updates. Edit: I can start the machine in safe mode (where I did nothing but backup some files). I restarted and it no longer tries to do a windows update, just goes to the desktop where everything seems extremely broken. I can click on some things, but not launch most programs. I guess all I can do at this point is do a system restore or something. Edit: Re-installed windows on this system yesterday. That's my usual solution to issues I don't feel like diagnosing, like this one.

  Read the article

• vmware server 64 bit on ubuntu 9.10 64 bit with P2V windows 2003 SBS poor network speed

  - by RobertHC

  configuration is ubuntu 2.6.31-21 64 bit vmware 2.0.2 64 bit last release hardware is core 2 quad with 8GB ram guest is win 2003 server SBS 32 bit Dear friends, we have a converted physical to virtual windows sbs 2003, converted with last converter available nowadays http://www.vmware.com/products/converter/ vCenter converter. Running the P2V 2K3 SBS on vmware server, it does boot fine, but we do note an abnormal CPU activity and a poor lan speed. As attempts we did what follow. We removed all unneeded peripherals, we removed one NIC (phisycal server was 2 nics), we changed the vmx to ged the nic recognized as intel instead than amd, we removed 1 cpu (physical was 2 cpu), we removed anything was reported as failed driver from system events monitor. Nothing to do, no way and funny results. Let's read some tests results. All are made with the same file copied in different source folders. Copying from client side (both directions copy, to/from server) results are i.e. 10 seconds, copying the same files from server side (again from and to server) results are different... from client to server, speed is round about (bit more) 10 seconds, but from server to client direction is slower: double the time. Beeing very fast and launching a simultaneous copy "from server to client"+"from client to server", this made from the server side, results in a stuck traffic... 45 seconds to do the copy. vmware tools are installed and e1000 driver has been updated. With one processor CPU activity is still going up and down but much less than with two. Because of test, we installed win 2k8 STD 64 bit. We repeated all the above tests with exactly the same file result is just one: always 5 seconds (this matches the lan speed) Any idea about this issue is welcome and thank you if any. Kind regards R.

  Read the article

• Windows 7 versus Windows XP multithreading - Delphi app not acting right

  - by Robert Oschler

  I'm having a problem with a Delphi Pro 6 application that I wrote on my Windows XP machine when it runs on Windows 7. I don't have Windows 7 to test yet and I'm trying to see if Windows 7 might be the source of the trouble. Is there a fundamental difference between the way Windows 7 handles threads compared to Windows XP? I am seeing things happen out of sequence in my error logs on Windows 7 and it's causing problems. For example, objects that should have been initialized are uninitialized when running on Windows 7, yet those objects are initialized on Windows XP by the time they are needed. Some questions: 1) Are there any core differences that could cause threads/processes to behave differently between the two operating system versions? 2) I know this next question may seem absurd, but does Windows 7 attempt to split/fork threads that aren't split/forked on Windows XP? 3) And lastly, are there any known issues with FPU handling that can cause XP programs trouble when run on Windows 7 due to operational differences in wait state handling or register storage, or perhaps something like Exception mask settings, etc? 4) Any 32-bit versus 64-bit issues that could be creating trouble here? -- roschler

  Read the article

• Windows cannot determine which language to install ?

  - by Mohammad

  I'm gonna install Windows Server 2008 SP2 on VMware Workstation 7.0.1 build-227600. But in installation I receive the following error and Windows doesn't continue installing procedure. Windows cannot determine which language to install ? What's wrong with it? Could you please guide me? Thanks.

  Read the article

• Time Service will not start on Windows Server - System error 1290

  - by paradroid

  I have been trying to sort out some time sync issues involving two domain controllers and seem to have ended up with a bigger problem. It's horrible. They are both virtual machines (one being on Amazon EC2), which I think may complicate things regarding time servers. The primary DC with all the FSMO roles is on the LAN. I reset its time server configuration like this (from memory): net stop w32time w23tm /unregister shutdown /r /t 0 w32tm /register w32tm /config /manualpeerlist:”0.uk.pool.ntp.org,1.uk.pool.ntp.org,2.uk.pool.ntp.org,3.uk.pool.ntp.org” /syncfromflags:manual /reliable:yes /update W32tm /config /update net start w32time reg QUERY HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config /v AnnounceFlags I checked to see if it was set to 0x05, which it was. The output for... w32tm /query /status Leap Indicator: 0(no warning) Stratum: 1 (primary reference - syncd by radio clock) Precision: -6 (15.625ms per tick) Root Delay: 0.0000000s Root Dispersion: 10.0000000s ReferenceId: 0x4C4F434C (source name: "LOCL") Last Successful Sync Time: 10/04/2012 15:03:27 Source: Local CMOS Clock Poll Interval: 6 (64s) While this was not what was intended, I thought I would sort it out after I made sure that the remote DC was syncing with it first. On the Amazon EC2 remote replica DC (Windows Server 2008 R2 Core)... net stop w32time w32tm /unregister shutdown /r /t 0 w32time /register net start w32time This is where it all goes wrong System error 1290 has occurred. The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service. I cannot get the w32time service to start. I've tried resetting the time settings and tried to reverse what I have done. The Ec2Config service cannot start either, as it depends on the w32time service. All the solutions I have seen involve going into the telephony service registry settings, but as it is Server Core, it does not have that role, and I cannot see the relationship between that and the time service. w32time runs in the LocalService group and this telephony service which does not exist on Core runs in the NetworkService group. Could this have something to do with the process (svchost.exe) not being able to be run as a domain account, as it now a domain controller, but originally it ran as a local user group, or something like that? There seem to be a lot of cases of people having this problem, but the only solution has to do with the (non-existant on Core) telephony service. Who even uses that?

  Read the article

• Project Server 2007 install issue - ProjectEventService won't start

  - by Brian Meinertz

  Trying to install PS2007 with SP1 on Server 2003. The install goes fine, but when running the SharePoint Configuration Wizard, it fails at stage 6 of 12 with the error: Failed to register SharePoint Services. An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service ProjectEventService on computer '.'. From the PSCDiagnostics log: Exception: System.InvalidOperationException: Cannot start service ProjectEventService on computer '.'. --- System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion. The ProjectEventService (Microsoft Office Project Server Event) won't even start manually using the Network Service account. Starting the service with a domain account works, but subsequently running the Config Wizard causes the service to be removed and re-provisioned to run using the Network Service account, which again fails. Presumably Network Service needs elevated permissions, but even adding it to the local Admin group makes no difference. Anyone come across this sort of issue before?

  Read the article

• Windows Server 2012 IPAM feature - "Unblock IPAM Access" error/recomended action

  - by HopelessN00b

  So, I'm in the process of setting up an IP Address Management server, using the built-in IPAM feature in Server 2012, and have run into a problem that I'm hoping someone else has successfully solved. Following the technet guide here, I've installed and configured IPAM, and have provisioned it via GPO. After verifying that the PowerShell invoke-ipamgpoprovisioning command is successful, managing the desired servers in IPAM, running gpupdate /force on the servers and refreshing my view in IPAM, I'm still getting the less-than-useful recommended action of "Unblock IPAM Access" for all servers. (First done 3 hours ago, so it's not a give-it-time-to-propagate issue.) Can't, for the life of me, seem to figure out what's causing this, find anything useful in the logs, or find much about this on Google or in the help files, so I was wondering if anyone here had any ideas about how to fix this, or even where to start looking. I'd really like to get this working, because if not, I have to resume work on creating an Excel spreadsheet for IP address management.

  Read the article

• MemCached on Windows x64

  - by Django Reinhardt

  This question has previously been asked, but that was a year ago and I wanted to know if there had been any developments since then. Basically we'd like to use a MemCached Server on a Windows Server 2008 R2 machine... which is only x64, obviously. I haven't found any details on a Win64 version of MemCached, but there is still the solution from the previous thread (which I haven't tried yet) to use a bit of software called MemCacheD Manager running MemCached 1.2.6. However, the current version of MCd is 1.4.4 and I was wondering if there had been any improvements since then.

  Read the article

• Windows 7 update failed (language pack update)

  - by yihang

  I am using Windows 7 Ultimate and tried to install the language pack for chinese simplified from Windows Update and failed for many times. The error code was 8007065B: Windows Update encountered an unknown error. What does the code means? I have tried to google it but cannot find anything. What should I do to solve this problem.

  Read the article

• VMWare server host agent service won't start

  - by Bimo Arioseno

  I'm using VMWare Server 2.0 on Windows Server 2003 R2. Sometimes after restarting the host machine, the VMWare host agent service won't start due to an error. This is the error messages from Event Viewer: [Service control manager] Timeout (30000 milliseconds) waiting for the VMware Host Agent service to connect. [Service control manager] The VMware Host Agent service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. I've set the service to automatically restart after subsequent failure using services.msc (using a 10 min. delay), but it still won't start. Only starting the service manually seems to work. Has anyone experienced this before? What workarounds or fixes are there?

  Read the article

• SQL 2008 Database tuning advisor won’t start

  - by Andrew Hancox

  For some reason I can't get DTA to connect to my development machine. It connects to a remote DB just fine but when I point it to my dev machine I get an error saying: Failed to initialize MSDB database for tuning (exit code: -1073741819). I'm pretty sure it's not a permissions issue since I've used profiler to capture what it's doing and all of the commands it's run so far look fine and are being run under my account which is associated with the sysadmin role, when I run them in sql management studio they go through fine. I'm pretty convinced that the problem is related to creating the objects in MSDB that are used by DTA but I tried creating these manually (I found scripts on the web) and it just seems to push the problem along the line slightly. I'm going out of my mind - have even tried reinstalling SQL but that's not fixed it. I'm using SQL 2008 with SP1 (10.0.2531) on windows server 2008 (patched up to date). SAVE ME!!!!!

  Read the article

• New VM on Windows 7 Virtual PC cannot access host's DVD Drive

  - by Gustavo Cavalcanti

  I have a brand new clean machine with Windows 7 Professional 64bit and I've installed the patch that adds Windows Virtual PC (Windows6.1-KB958559-x64). I then go to Windows Virtual PC, create a new Virtual Machine. As soon as go to settings and try to map the VM DVD drive to the host's DVD drive I get "File may be in use by another process or you may not have sufficient access privilege". I am an administrator in that box... Help please!

  Read the article

• Creating Limited User Accounts on Ubuntu Server

  - by LonnieBest

  Using Ubuntu server, I need to create some user accounts that have the following limitations: (1) User may only view and manipulate files in their home directory. (2) User may only execute commands related to rsync and sftp. I want users to be able to backup files using rsync, and I want them to be able retrieve files using an sftp client like FileZilla. Other than this, I don't want users to be able to view other files on the system, or execute any commands that might mess with the system. I'm more of an Ubuntu Desktop user, and have very little experience administering a linux server. Most tutorials I've found assume I know things that I don't know. So I'm having difficulty setting this up.

  Read the article

• Install windows xp from USB using the iso image

  - by buyrum

  I've got the windows xp ISO image on my computer and i want to install it on a computer without cdrom. The only way to do it is using usb flash drive. I don't know how to do it - i need to burn the iso to usb, make the usb bootable, install windows xp from the usb onto the hardrive (the usb should just replace the standard windows install disc). How to do it ?

  Read the article

• Movie Library on Windows Media Center Extender

  - by Shawn Miller

  I have a share setup on a NAS server with ripped versions of my DVDs. I pointed the Windows 7 version of the Windows Media Center Movie Library feature to the network share and it's able to find and play all my movies when running Windows Media Center from the local computer. When I try this on my Xbox 360 extender it never discovers any of my movies. Anyone able to get this to work?

  Read the article

• Project Server 2007 install issue - ProjectEventService won't start

  - by Brian Meinertz

  Trying to install PS2007 with SP1 on Server 2003. The install goes fine, but when running the SharePoint Configuration Wizard, it fails at stage 6 of 12 with the error: Failed to register SharePoint Services. An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service ProjectEventService on computer '.'. From the PSCDiagnostics log: Exception: System.InvalidOperationException: Cannot start service ProjectEventService on computer '.'. --- System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion. The ProjectEventService (Microsoft Office Project Server Event) won't even start manually using the Network Service account. Starting the service with a domain account works, but subsequently running the Config Wizard causes the service to be removed and re-provisioned to run using the Network Service account, which again fails. Presumably Network Service needs elevated permissions, but even adding it to the local Admin group makes no difference. Anyone come across this sort of issue before?

  Read the article

• Connecting a limited user to win server 2003 through LogMeIn

  - by Jeff

  Logmein support can't help me, maybe someone here can. I have a user on a windows 2003 server (non administrator). When I first created him and tried to connect through remote desktop I got the error "The local policy of the system does not permit you to logon interactively." I looked up the error and saw that this user was not a member of the Remote Desktop Users group. I added him to the group and was able to remote desktop in just fine. Then I tried to connect this user to the server through LogMeIn (pro trial version). I got the same error as when the user was not a part of the Remote Desktop Users group ("The local policy of the system does not permit you to logon interactively."). Can anyone tell me any other groups the user must be a member of in order to be allowed access through LogMeIn? I would image this is a common requirement logmein support seemed to have no idea.

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >