Search Results

Search found 3224 results on 129 pages for 'crash dumps'.

Page 99/129 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

  • Windows Media Center showing Jerky Video on PC

    - by Kris Erickson
    I had to repave my Windows 7 x64 box last week due to a hard drive crash, and for a while everything was running perfectly but now all videos in Windows Media Center are jerky (the sound is fine, they just seem to skip a ton of frames all the time). This is on the local machine, but the same thing happens when I try to stream to my Xbox. The videos all show fine in VLC and Windows Media Player. I guess I must have installed something recently (in the process of getting all the apps I usually have running on my PC) that caused this but for the life of me I can't figure it out. I have updated to the latest video driver (and then rolled back to the standard Windows 7 driver), I have rolled back all the other drivers that I have installed (I believe). I have uninstalled all the codec packs (I also run TVersity, so I hate the TVersity codec pack installed), and I uninstalled TVersity. Nothing seems to help. I have uninstalled windows media center, and reinstalled it from the Programs and Features. I have basically ran out of things to try to fix this, and am almost thinking about reinstalling Windows again. Any suggestions?

    Read the article

  • Anti Virus Service does not run - Windows XP SP3 32bit Home

    - by Stefan Fassel
    I have a somewhat strange problem here. I am trying to run Anti Virus Software on my Windows XP Home 32bit System. After a serious crash I had to fall back to an outdated copy of my initial installation and had Windows install 5 years of updates. So far so good. After Intalling a new Anti Virus Software (Bitdefender 2012) everything seemed to be fine, initial scanning went fine and configuration was working. But after restarting the System the Virus Scanner was unable to start up again. Even the Configuration console of the AV Software did not start. I tried scanning the System for malware, but nothing was found. Then I tried a different AV Software (MS Security Essentials), but in the end it did fail to start too. I have tried to start the Service manually, but I seem to be missing the privilege to do so. I am logged in as a Non-"Administrator" User with Admin privileges (Not much choices there on a XP Home System). I cannot switch to Administrator account outside the protected mode. When running Windows in protected mode I am unable to start the AV Software because it does not run in protected mode. I am a bit at loss now...

    Read the article

  • Feasibility of Windows Server 2008 DFS replication over WAN link

    - by CesarGon
    We have just set up a WAN link that connects two buildings in our organisation. The link is provided by a 100-Mbps point to point line. We have a Windows Server 2008 R2 domain controller on each side of the link. Now we are planning to set up DFS for file services across the organisation. The estimated data volume is over 2 TB, and will grow at approximately 20% annually. My idea is to set up a file server in each building and install DFS so that all the contents stay replicated over the 100-Mbps link. I hope that this will ensure that any user will be directed to the closest (and fastest) server when requesting a file from the DFS folders. My concern is whether a 100-Mbps WAN link is good enough to guarantee DFS replication. I've no experience with DFS, so any solid advice is welcome. The line is reliable (i.e. it doesn't crash often) and our data transfer tests show that a 5 MB/sec transfer rate is easily achieved. This is approximately 40% of the nominal bandwidth. I am also concerned about the latency. I mean, how long will users need to wait to see one change on one side of the link after the change has been made on the other side. My questions are: Is this link between networks a reliable infrastructure on which to set up DFS replication? What latency times would be typical (seconds, minutes, hours, days)? Would you recommend that we go for DFS in this scenario, or is there a better alternative? Many thanks.

    Read the article

  • Is there a program to show programs loading during the boot process in real time?

    - by Gary M. Mugford
    Hi all, There are any number of programs that will show me WHAT will run during the boot process for Windows XP. I've always been partial to Mike Lin's version but there are several others, some of which are quite possibly superior. That's not the issue. What I'd really like is a program that would load first and then would list the programs that were about to load and then check them off as the programs loaded. This isn't something I necessarily need for myself. But certain family members get click happy as soon as they see the icon they eventually want to run and end up clicking on it. THIRTY TWO TIMES in one memorable crash-inducing spasm. If there was some way for 'progress' to be shown during the loading of from the various spots Windows auto-loads from, PLUS a BIG BANNER saying "Please do not move the mouse or click on anything until done.", I think I might cut down on my early morning family support calls significantly. I've tried a variety of searches, but I couldn't find the ones that show in real time in the forest of links to programs that will show the list after the fact. Any leads? If not, do any of you who write the after-the-fact listers want to take a shot at producing a utility to do what I think would be a relatively popular utility? Best of the season to all of you and yours. Thanks in advance for any replies, GM

    Read the article

  • Nginx : Proper use of limit_req_zone and limit_req

    - by xperator
    I have 2 website running on VPS. Their purpose is sharing music files and publishing news. Both of them use wordpress. What I am trying is that I want to prevent little hackers from flooding the webserver and putting stress on the server to make it crash. The problem is that after using limit_req_zone and limit_req my website became very slow. Browsing Wordpress control panel takes a long long time. I tried changing values but it didn't improve much. I guess the problem is Wordpress because it's the only script I am using on both front and back end. Here is the last setting which seems to be more responsive than others : limit_req_zone $binary_remote_addr zone=flood:5m rate=10r/m; location ~ \.php$ { limit_req zone=flood burst=100 nodelay; } What are the optimal values that should be used in my case (wp) ? I want the website have it's normal behavior, On the other hand stopping lifeless people from flooding. Another question, Is it safe and enough to use limit_req only on php files ?

    Read the article

  • Use your own domain email and tired of SPAM? SPAMfighter FTW

    - by Dave Campbell
    I wouldn't post this if I hadn't tried it... and I paid for it myself, so don't anybody be thinking I'm reviewing something someone sent me! Long ago and far away I got very tired of local ISPs and 2nd phone lines and took the plunge and got hooked up to cable... yeah I know the 2nd phone line concept may be hard for everyone to understand, but that's how it was in 'the old days'. To avoid having to change email addresses all the time, I decided to buy a domain name, get minimal hosting, and use that for all email into the house. That way if I changed providers, all the email addresses wouldn't have to change. Of course, about a dozen domains later, I have LOTS of pop email addresses and even an exchange address to my client's server... times have changed. What also has changed is the fact that we get SPAM... 'back in the day' when I was a beta tester for the first ISP in Phoenix, someone tried sending an ad to all of us, and what he got in return for his trouble was a bunch of core dumps that locked up his email... if you don't know what a core dump is, ask your grandfather. But in today's world, we're all much more civilized than that, and as with many things, the criminals seem to have much more rights than we do, so we get inundated with email offering all sorts of wild schemes that you'd have to be brain-dead to accept, but yet... if people weren't accepting them, they'd stop sending them. I keep hoping that survival of the smartest would weed out the mental midgets that respond and then the jumk email stop, but that hasn't happened yet anymore than finding high-quality hearing aids at the checkout line of Safeway because of all the dimwits playing music too loud inside their car... but that's another whole topic and I digress. So what's the solution for all the spam? And I mean *all*... on that old personal email address, I am now getting over 150 spam messages a day! Yes I know that's why God invented the delete key, but I took it on as a challenge, and it's a matter of principle... why should I switch email addresses, or convert from [email protected] to something else, or have all my email filtered through some service just because some A-Hole somewhere has a site up trying to phish Ma & Pa Kettle (ask your grandfather about that too) out of their retirement money? Well... I got an email from my cousin the other day while I was writing yet another email rule, and there was a banner on the bottom of his email that said he was protected by SPAMfighter. SPAMfighter huh.... so I took a look at their site, and found yet one more of the supposed tools to help us. But... I read that they're a Microsoft Gold Partner... and that doesn't come lightly... so I took a gamble and here's what I found: I installed it, and had to do a couple things: 1) SPAMfighter stuffed the SPAMfighter folder into my client's exchange address... I deleted it, made a new SPAMfighter folder where I wanted it to go, then in the SPAMfighter Clients settings for Outlook, I told it to put all spam there. 2) It didn't seem to be doing anything. There's a ribbon button that you can select "Block", and I did that, wondering if I was 'training' it, but it wasn't picking up duplicates 3) I sent email to support, and wrote a post on the forum (not to self: reply to that post). By the time the folks from the home office responded, it was the next day, and first up, SPAMfighter knocked down everything that came through when Outlook opend... two thumbs up! I disabled my 'garbage collection' rule from Outlook, and told Outlook not to use the junk folder thinking it was interfering. 4) Day 2 seemed to go about like Day 1... but I hung in there. 5) Day 3 is now a whole new day... I had left Outlook open and hadn't looked at the PC since sometime late yesterday afternoon, and when I looked this morning, *every bit* of spam was in the SPAMfighter folder!! I'm a new paying customer After watching SPAMfighter work this morning, I've purchased a 1-year license, and I now can sit and watch as emails come in and disappear from my inbox into the SPAMfighter folder. No more continual tweaking of the rules. I've got SPAMfighter set to 'Very Hard' filtering... personally I'd rather pull the few real emails out of the SPAMfighter folder than pull spam out of the real folders. Yes this is simply another way of using the delete key, but you know what? ... it feels good :) Here's a screenshot of the stats after just about 48 hours of being onboard: Note that all the ones blocked by me were during Day 1 and 2... I've blocked none today, and everything is blocked. Stay in the 'Light!

    Read the article

  • How to change my W2k8 System Partition?

    - by Chris May
    On my Windows 2008 server, my C: is 1.5 TB, and the partition is marked as: Healthy (Boot, Page File, Active, Crash Dump, Primary Partition) and somehow I ended up with a 2GB D: that is marked as Healthy (System). On this D: drive are only a few MB worth of files (bootmgr, boot folder, bootsect.bak), but all Windows files are on the c:. I've done everything I can to remove the (System) mark. I tried using bcdedit, I tried marking the C:partition as "Active", I tried using bootsect.exe to assign the C: drive as the boot partition. Maybe I didn't do one of those steps correct, but I've tried everything I can. When I got my new Dell Poweredge T710, I didn't bother removing their 2 small drives before I put in my 2 new large drives. So I think when I installed W2k8 Server, maybe dell left some bootable partition on their drives to help me install the OS, but I never used it and just booted right from the install CD. Can anyone help me remove the (System) mark from the D: so I can remove the D: partition and still boot to the C:? I know I could remove the D: drives and reinstall windows, but I'm trying to avoid a total reinstall.

    Read the article

  • New tomcat install on OSX choking on startup.

    - by baudot
    I've completed a fresh install of Tomcat6 on an OS X box that didn't have it before. It's behaved a bit strangely in other ways, but the current hang-up is that it won't start at all. In response to running startup.sh, the catalina.out log collects this error: Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/catalina/startup/Bootstrap Caused by: java.lang.ClassNotFoundException: org.apache.catalina.startup.Bootstrap at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) Other bits of strangeness noticed with this installation: the .sh scripts in the bin directory had no execute permission, and had to be manually chmodded. The log folder wasn't created, causing an earlier script crash. After I manually created the log folder, the startup script made it to this new error before failing. Running other scripts in the bin folder generates similar error messages involving NoClassDefFoundError. Bootstrap.java is indeed in the right place, though Bootstrap.class isn't in the same folder. For that matter, if any of the myriad class files for tomcat should have already been generated from their .java files, I haven't seen it.

    Read the article

  • issues with Nginx + Passenger Production setup - Loading time/request time delay

    - by Dani Cela
    having a bit of an issue relating to request time. I have NGINX as a proxy server for a ruby on rails app running passenger. I also have a postgresql database server which is running on its own VM separate from my nginx/application server. My issue is that when I try and access my products page which does a lot of database queries, my query takes maybe 3-4 seconds. The second I flood the web server with requests, i will choke out the web server and have requests take almost 20-30 seconds to process. The rails server and database server do not crash, and the usage is not that high. Each server has more than enough memory, even cpu usage on the rails server isn't more than 85%, albeit thats high but its not maxing it out. Is my problem related to my nginx proxy server? I dont really know how to fully explain this so if you have a question please ask it and I can clarify what I mean. EDIT: to see exactly what i mean relating to the database query, see http://207.245.4.215/products

    Read the article

  • Find out when a system went down?

    - by Clinton Blackmore
    I have a Mac OS X 10.5 server, with a RAID set in it, that went down due to a power outage on Thursday, and the machine is not happily booting right now*. It is possible to find out when the machine went down, while not booted off the internal drive? (I'm booted off an external drive, waiting for the RAID sets to initialize.) Normally, I'd run last. The man page doesn't indicate that I can run it against a different startup volume. It looks possible to parse /var/log/utmpx, but I don't think it'd be worthwhile to try to do that from scratch for this one-off problem. * I'm still trying to figure out why it isn't happy, and may ask a follow-up question. Right now I can see that UserNotificationCenter crashed repeatedly early Thursday morning, and that securityd, mdworker, and ARDAgent crash shortly after startup [I think -- I want to verify when the box went up and down]. The login window does not come up right (I think it is crashing or not able to cope with a dead securityd). The box is supposed to be set to go down when the UPS tells it power is out; at the moment, I'm wondering if it went down, and turned back on multiple times! I sure hope not.

    Read the article

  • How to debug silent hang on shutdown of Solaris 10?

    - by jblaine
    We're experiencing a mysterious hang on shutdown of a newly-imaged Oracle/Sun Solaris 10 SPARC box. It is repeatable (in the same spot ... from what we can tell). We let it try to work itself out multiple times for 5-10 minutes and it never progressed. I've never seen this happen before. The last thing displayed on the console is that syslogd was sent signal 15. Prior to us disabling snmpdx on the box, the last thing on the console was that snmpdx was sent signal 15 (after syslogd was sent signal 15). While very rare to find, in Solaris days past, I'd have a better idea from experience where the problem might be, and could then narrow things down further with silly (but effective) debugging echo statments in /etc/*.d scripts. With SMF in the picture, I'm not really quite sure where to start. We forced a crash dump via sync at the {ok} prompt for later analysis, and then let the box come up because it's a production server and our scheduled outage window was closing. /var/adm/messages shows nothing of use. How would you debug this situation? mdb ps of the savecore shows the following processes were running at hang time (afsd is the OpenAFS client and that many are expected): > > ::ps S PID PPID PGID SID UID FLAGS ADDR NAME R 0 0 0 0 0 0x00000001 00000000018387c0 sched R 108 0 0 0 0 0x00020001 00000600110fe010 zpool-silmaril-p R 3 0 0 0 0 0x00020001 0000060010b29848 fsflush R 2 0 0 0 0 0x00020001 0000060010b2a468 pageout R 1 0 0 0 0 0x4a024000 0000060010b2b088 init R 1327 1 1327 329 0 0x4a024002 00000600176ab0c0 reboot R 747 1 7 7 0 0x42020001 0000060017f9d0e0 afsd R 749 1 7 7 0 0x42020001 00000600180104d0 afsd R 752 1 7 7 0 0x42020001 0000060017cb44b8 afsd R 754 1 7 7 0 0x42020001 0000060017fc8068 afsd R 756 1 7 7 0 0x42020001 0000060017fcb0e8 afsd R 760 1 7 7 0 0x42020001 00000600177f4048 afsd R 762 1 7 7 0 0x42020001 000006001800f8b0 afsd R 764 1 7 7 0 0x42020001 000006001800ec90 afsd R 378 1 378 378 0 0x42020000 0000060013aee480 inetd R 7 1 7 7 0 0x42020000 0000060010b28008 svc.startd R 329 7 329 329 0 0x4a024000 00000600110ff850 sh Z 317 7 317 317 0 0x4a014002 0000060013b3a490 sac

    Read the article

  • Windows 7 Explorer keeps crashing

    - by Daniel Liang
    I currently have an issue with Windows Explorer. It keeps crashing when I browse through a network drive. This is happening on several computers. I have already obtained a crash dump file but it doesn't state much: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\LocalDumps\explorer.exe.3964.dmp] User Mini Dump File with Full Memory: Only application data is available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible Product: WinNt, suite: SingleUserTS Machine Name: Debug session time: Mon Oct 21 11:21:30.000 2013 (UTC - 4:00) System Uptime: 0 days 0:06:20.449 Process Uptime: 0 days 0:05:54.000 ................................................................ ................................................................ .... Loading unloaded module list ............. This dump file has an exception of interest stored in it. The stored exception information can be accessed via .ecxr. (f7c.fe4): Access violation - code c0000005 (first/second chance not available) eax=00000000 ebx=07a3f080 ecx=00000400 edx=00000000 esi=00000002 edi=00000000 eip=76e170f4 esp=07a3f030 ebp=07a3f0cc iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 ntdll!KiFastSystemCallRet: 76e170f4 c3 ret I've already tried removing certain context menu items. I disabled all unnecessary start-up items. Ran memtest86 and it looks fine on that end. It also happens when I browse through my local disk. Can anyone take a look into this? Thanks!

    Read the article

  • Apache httpd processes and PHP out of memory

    - by Ofri
    I have a VPS running apache-php-mysql on centos and a single drupal website installed. The VPS has 256MB of RAM (could be the root cause of all my problems... maybe I just need more). Whenever I try to open my website from multiple browser tabs (about 8... not 800) all at once, apache crashes! I have this on the log: [Wed Oct 24 11:26:31 2012] [error] [client xxx] PHP Fatal error: Out of memory (allocated 28049408) (tried to allocate 201335 bytes) in xxx on line 2139, referer: xxx I have read many many posts here, but I think there is something fundamental that I'm missing - If I understand correctly some php script tried to allocate 200K after allocating 28MB, and fails to do so. First question is: should this cause the apache to crash??? Next, I tried to look at 'top' command while I do my little test. Indeed I see 7 httpd processes, each reserving about 30MB - which explains why my RAM runs out. How do I prevent apache from creating new processes until it's out of memory? I tried configuring /etc/httpd/conf/httpd.conf like this: <IfModule prefork.c> StartServers 1 MinSpareServers 1 MaxSpareServers 1 ServerLimit 1 MaxClients 1 MaxRequestsPerChild 100 </IfModule> But got the same exact result! What am I missing? Thanks a lot!

    Read the article

  • How Do I Stop NFS Clients from Using All of the NFS Server's Resources?

    - by Ken S.
    I have a v4 NFS server running on Ubuntu 12.04LTS. It is the main repository for the web assets that four external nginx webservers mount to serve up to site visitors. These client servers connect to it via a read-only mount. Each of these RO servers has this displayed when I check the mounts: 10.0.0.90:/assets on /var/www/assets type nfs4 (ro,addr=10.0.0.90,clientaddr=0.0.0.0) The NFS master's /etc/exports file contains entries like this for each server: /mnt/lvm-ext4 10.0.0.40(ro,fsid=0,insecure,no_subtree_check,async) The problem that I'm seeing is that these clients are eventually utilizing all the RAM on the NFS server and causing it to crash. If I do a watch free -m I can watch the used memory creep up until it's used and then see the free buffers/cache entry creep down to near zero before the server eventually locks up requiring a reboot. There is some sort of memory leak somewhere that is causing this, and the optimal solution would be to find it and fix it, but in the meantime I need to find a way to have the NFS server protect itself from connected clients using all it's RAM. There must be some sort of setting that limits the resources the clients can use, but I can't seem to find it. I've tried adjusting the values for rsize and wsize but they don't seem to help or be related. Thanks for any tips.

    Read the article

  • White Screen, No Errors.

    - by GruffTech
    So.. Interesting problem for you guys, As I'm completely lost as to what to do, or where to take the next step. Server & Application Environment. CentOS release 5.3 (Final) Apache 2.2.3-22 EnableSendfile off EnableMMAP off ErrorLog logs/error_log LogLevel debug PHP-5.2.6-2 error_reporting = E_ALL display_errors = on log_errors = on max_execution_time=300 max_input_time=60 memory_limit=512mb Kohana 2.3 PHP Environment. HAProxy 1.3.15.6-2 MemCacheD 1.2.6-1 Our application is split between 3 web servers, mounting a NFS Storage server, and sticky load balancing between the 3 web servers. The application seemingly runs great, but every so often, instead of loading, the application just shows a pure white page. Not a 404 Error, or a 500 Server Error, a clean white page. And it returns instantly, so its not a execution time error. Nothing in the Error log, or Server-Error Log, Proxy log shows standard proxied connection, Just the standard 200-Status in Access log, with 256 bytes transferred. To me, this leads to tell me that the application itself is having a problem. A rare, unexplainable, seemingly random, problem that causes what we've now called the "White Screen of Death." Our developers all say that since there is nothing going to our error logs, that it must be a server problem. But I say the same thing, There's nothing going to ANY of our logs (relevent to this anyway), and we're not having httpd children crash from what i can tell. Any ideas on how i can increase my logs, or somehow prove that its not a bug in PHP, Apache, CentOS, ect? Or if it is somehow a bug, identify it?

    Read the article

  • What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

    - by Jacob
    How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

    Read the article

  • Windows 7 64 bit Installation freezes after a while durig the setup

    - by vinz243
    I have a windows 7 32 bits on my computer. Because i have 5 gb of ram (kingston) on my asus M2N motherboard and only 3 were able to be used, I bought W7 x64 and install it. It loads the wizard, but after a while, it freezes, and I have to force reboot. It first crashed while unzipping w7 files, but if I wait a while on the terms page for example, it can crash before, which make me think that it is a matter of time. I remember I had the same issue while booting on Ubuntu x64, it crashed randomly but not load completely. No bip or other messages. Configuration: Software OS (before) W7 x86 Pro New OS : W7 x64 Pro Antivirus : avast (bios verification ?) BIOS 03/27/2008 - v08.00.12 Hardware : Motherboard : Asus M2N Processor : AMD Athlon 64 dualcore @ 2.6 GHZ Memory : 5120 MB ((2 + 2) + (1)) NOTES : I ran a memory test using openSUSE cd, though i have not finished it, it ran. EDIT: I tried not to run the setup but wait, and i get the BSOD : A problem... TL;DW IRQL_NOT_LESS_OR_EQUAL If it is.. TL;DW ***STOP: 0x0000000A (0x0000000000000000,0x0000000000000002, 0x0000000000000001, 0xFFFFF8001A49ED1F)

    Read the article

  • Does IIS Sometimes Allocate More Worker Processes Than Configured?

    - by Paul Williams
    We have an IIS 7.5 web service on Windows Server 2008 that handles WCF requests from C# clients. This service is configured to have Maximum Worker Processes = 1, so it is not a web garden. IIS is setup to recycle itself at the same time every day (3 AM). I am trying to debug gnarly connection issues, so I wanted to be sure the application pool was not recycling itself. I configured the pool to log an event when it recycles itself. To my surprise, I see the following entries in the System event log: Level: Information Date/Time: 3/23/2012 3:00:00 AM - Source: WAS - Event ID: 5076 A worker process with process id of '6636' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. Level: Information Date/Time: 3/23/2012 2:59:39 AM - Source: WAS - Event ID: 5076 A worker process with process id of '9364' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. IIS is correctly recycling the application pool at 3 AM. However, I do not understand why I would be getting two recycle events in the log within a few seconds of each other. The maximum number of processes is 1. Does IIS sometimes allocate multiple processes for an application pool that is specified as having 1 process? -- edit -- I connected at about 4 PM today and only saw 1 w3wp.exe process. There are no other event log entries that would indicate a crash.

    Read the article

  • How to find out what is causing a slow down of the application on this server?

    - by Jan P.
    This is not the typical serverfault question, but I'm out of ideas and don't know where else to go. If there are better places to ask this, just point me there in the comments. Thanks. Situation We have this web application that uses Zend Framework, so runs in PHP on an Apache web server. We use MySQL for data storage and memcached for object caching. The application has a very unique usage and load pattern. It is a mobile web application where every full hour a cronjob looks through the database for users that have some information waiting or action to do and sends this information to a (external) notification server, that pushes these notifications to them. After the users get these notifications, the go to the app and use it, mostly for a very short time. An hour later, same thing happens. Problem In the last few weeks usage of the application really started to grow. In the last few days we encountered very high load and doubling of application response times during and after the sending of these notifications (so basically every hour). The server doesn't crash or stop responding to requests, it just gets slower and slower and often takes 20 minutes to recover - until the same thing starts again at the full hour. We have extensive monitoring in place (New Relic, collectd) but I can't figure out what's wrong; I can't find the bottlekneck. That's where you come in: Can you help me figure out what's wrong and maybe how to fix it? Additional information The server is a 16 core Intel Xeon (8 cores with hyperthreading, I think) and 12GB RAM running Ubuntu 10.04 (Linux 3.2.4-20120307 x86_64). Apache is 2.2.x and PHP is Version 5.3.2-1ubuntu4.11. If any configuration information would help analyze the problem, just comment and I will add it. Graphs info phpinfo() apc status memcache status collectd Processes CPU Apache Load MySQL Vmem Disk New Relic Application performance Server overview Processes Network Disks (Sorry the graphs are gifs and not the same time period, but I think the most important info is in there)

    Read the article

  • Trying to connect simple VB6 ADO to SQL Server 2008

    - by Henry
    We have a VB6 App that -for current purposes - is very basic ADO: Dim a New ADODB.Recorset, set some basic properties like Cursor Location and Lock Type, set a Connection String and a .Source like "Select * from CustomerMaster", and .OPEN - nothing fancy here! Yet, on a new SBS installation with SQL Server 2008 across 2 Servers (one for Apps, the other dedicated to SQL!), it dies/hangs/crashes if you try to run such a Query from anything but the SQL Sever box. Initially, we were using the SQLOLEDB.1 driver, which would crash/hang the entire SQL Server after about 4 such queries (built a simple 6 line App just for this purpose). Then switched to the NATIVE SQL driver, which did allow us unlimited, happy queries - until you did the first Change/Update - THEN it would corrupt the SQL Server if you exited and tried to go back in. All this 'corruption' is happening from the 'App Server' of the SBS pair, and I presume that the App Server (also installed in tandem with the SQL server this week) has the latest MDACs, etc. And running it from a 'lowly XP workstation' is (obviously) no better. ANY ideas??? -Henry

    Read the article

  • Can many addon domains slow down cPanel or create problems?

    - by Marco Demaio
    I actually resell hosting plans by using one single cPanel account and many addon domains under it. Basically for each new user I don't create a new cP account, but I simply create a new ADDON domain and give him the necessary space. I know in this way the final user won't be able to manage his emails and he want be able to access all cPanel features, but that's ok. My only question is: "is there a limit on the number of cPanel addon domain that can be added?". I know in my account I'm allowed to add unlimited addon domains, but is there something that might happen that slows down cPanel or could create problems? I mean is there any suggestions you could give me about the way i'm using cPanel which might not be the usual way of using it. (As for instance: "be aware that Awstast could run very slow or crash", or "be aware that mails from different addon domains under the same cp account could create many problems.", etc.) Many thanks!

    Read the article

  • mshtml.dll latest version for Internet Explorer 8, Windows XP Service Pack 3

    - by AllSolutions
    Many applications in my system (Internet Explorer 8, Yahoo Messenger, Skype 10) are crashing and error details shows module name mshtml.dll. I checked the version of mshtml.dll in system32 folder. It is 8.0.6001.19170. My Internet Explorer version is 8.0.6001.18702. I am not concerned about crash of IE, because I generally use Firefox, but how do I solve the crashes in other applications, which are due to mshtml.dll? I have moved to Windows XP Service Pack 3 (32 bit). I have tried to update Internet Explorer 8 (from Tools-Windows Update), but again it crashes. I can not migrate to IE 9, as it requires Vista or Windows 7. I have applied Cumulative Security update for IE8, which has this file name: IE8-WindowsXP-KB2618444-x86-ENU.exe I could not get much info from Microsoft sites or Google. I do not want to use Automatic Updates feature of Windows. Can somebody give the download links for mshtml.dll and any associated files, which I can replace in system32 folder? Thanks.

    Read the article

  • A very useful custom component

    - by Kevin Smith
    Whenever I am debugging a problem in WebCenter Content (WCC) I often find it useful to see the contents of the internal data binder used by WCC when executing a service. I want to know the value of all parameters passed in by the caller, either a user in the web GUI or from an application calling the service via RIDC or web services. I also want to the know the value of binder variables calculated by WCC as it processes a service. What defaults has it applied based on configuration settings or profile rules? What values has it derived based on the user input? To help with this I created a  component that uses a java filter to dump out the contents of the internal data binder to the WCC trace file. It dumps the binder contents using the toString() method. You can register this filter code using many different filter hooks to see how the binder is updated as WCC processes the service. By default, it uses the validateStandard filter hook which is useful during a CHECKIN service. It uses the system trace section, so make sure that trace section is enabled before looking for the output from this component. Here is some sample output>system/6    10.09 09:57:40.648    IdcServer-1    filter: postParseDataForServiceRequest, binder start -- system/6    10.09 09:57:40.698    IdcServer-1    *** LocalData *** system/6    10.09 09:57:40.698    IdcServer-1    (10 keys + 0 defaults) system/6    10.09 09:57:40.698    IdcServer-1    ClientEncoding=UTF-8 system/6    10.09 09:57:40.698    IdcServer-1    IdcService=CHECKIN_UNIVERSAL system/6    10.09 09:57:40.698    IdcServer-1    NoHttpHeaders=0 system/6    10.09 09:57:40.698    IdcServer-1    UserDateFormat=iso8601 system/6    10.09 09:57:40.698    IdcServer-1    UserTimeZone=UTC system/6    10.09 09:57:40.698    IdcServer-1    dDocTitle=Check in from RIDC using Framework Folder system/6    10.09 09:57:40.698    IdcServer-1    dDocType=Document system/6    10.09 09:57:40.698    IdcServer-1    dSecurityGroup=Public system/6    10.09 09:57:40.698    IdcServer-1    parentFolderPath=/folder1/folder2 system/6    10.09 09:57:40.698    IdcServer-1    primaryFile=testfile5.bin     system/6    10.09 09:57:40.698    IdcServer-1    ***  RESULT SETS  ***>system/6    10.09 09:57:40.698    IdcServer-1    binder end -------------------------------------------- See the readme included in the component for more details. You can download the component from here.

    Read the article

  • How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

    - by M. Tibbits
    Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

    Read the article

  • What can cause a kernel hang on redhat 4?

    - by Ivan Buttinoni
    I've to solve a nasty problem on a ten machine "cluster": randomly one of these machine hang during an hard computation, sometime still ping sometime not. The problem was described me at the phone, I've still no touch/see these machine, so I can't be more precise. It seem there's no (real) keyboard or monitor linked to them, so I haven't nothing about keyboard led or messages on monitor. Don't worry, what I really need is some suggestion where to search the problem, some suggestions on what can cause a kernel hang on a working machine. I also see this post, but seem same need on a different situation. My ideas since now: - HW problem (ram, cpu, fan etc.) - bad autofs configuration - bad nfs(?) configuration - presence of a trojan/hacker/etc - /dev/"swap" linked to /dev/zero - kernel out of memory(??) - kernel bugged In other words I try to imagine what kind of envent can occour that can crash the kernel insted of the application that generate the event. What hang have YOU experienced before? Write it to me! TIA

    Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >