Search Results

Search found 56 results on 3 pages for 'sev'.

Page 1/3 | 1 2 3  | Next Page >

  • Cisco VPN Client dropping connection

    - by IT Team
    Using Windows XP and Cisco VPN client version 5.0.4.xxx to connect to a remote customer site. We are able to establish the connection and start an RDP session, but within 1-2 minutes the connection drops and the VPN connection disconnects. The PC making the connection is on a DMZ which is NATed to a public IP address. If we move the PC directly onto the internet without being on the DMZ the connection works and we don't encounter any disconnects. We use a PIX 515E running 7.2.4 and don't have any problems with similar setups connecting to other customer sites from the DMZ. The VPN setup on the client side is pretty basic, using IPSec over TCP port 10000. Not sure what device they are using on the peer, but my guess would be an ASA. Any idea as to what the problem would be? Below is the logs from the VPN client when the problem occurs. The real IP address has been changed to: RemotePeerIP. 4 14:39:30.593 09/23/09 Sev=Info/4 CM/0x63100024 Attempt connection with server "RemotePeerIP" 5 14:39:30.593 09/23/09 Sev=Info/6 CM/0x6310002F Allocated local TCP port 1942 for TCP connection. 6 14:39:30.796 09/23/09 Sev=Info/4 IPSEC/0x63700008 IPSec driver successfully started 7 14:39:30.796 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 8 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x6370002C Sent 256 packets, 0 were fragmented. 9 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x63700020 TCP SYN sent to RemotePeerIP, src port 1942, dst port 10000 10 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x6370001C TCP SYN-ACK received from RemotePeerIP, src port 10000, dst port 1942 11 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x63700021 TCP ACK sent to RemotePeerIP, src port 1942, dst port 10000 12 14:39:30.796 09/23/09 Sev=Warning/3 IPSEC/0xA370001C Bad cTCP trailer, Rsvd 26984, Magic# 63697672h, trailer len 101, MajorVer 13, MinorVer 10 13 14:39:30.796 09/23/09 Sev=Info/4 CM/0x63100029 TCP connection established on port 10000 with server "RemotePeerIP" 14 14:39:31.296 09/23/09 Sev=Info/4 CM/0x63100024 Attempt connection with server "RemotePeerIP" 15 14:39:31.296 09/23/09 Sev=Info/6 IKE/0x6300003B Attempting to establish a connection with RemotePeerIP. 16 14:39:31.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Unity)) to RemotePeerIP 17 14:39:36.296 09/23/09 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 18 14:39:36.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (Retransmission) to RemotePeerIP 19 14:39:41.296 09/23/09 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 20 14:39:41.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (Retransmission) to RemotePeerIP 21 14:39:46.296 09/23/09 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 22 14:39:46.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (Retransmission) to RemotePeerIP 23 14:39:51.328 09/23/09 Sev=Info/4 IKE/0x63000017 Marking IKE SA for deletion (I_Cookie=AEFC3FFF0405BBD6 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING 24 14:39:51.828 09/23/09 Sev=Info/4 IKE/0x6300004B Discarding IKE SA negotiation (I_Cookie=AEFC3FFF0405BBD6 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING 25 14:39:51.828 09/23/09 Sev=Info/4 CM/0x63100014 Unable to establish Phase 1 SA with server "RemotePeerIP" because of "DEL_REASON_PEER_NOT_RESPONDING" 26 14:39:51.828 09/23/09 Sev=Info/5 CM/0x63100025 Initializing CVPNDrv 27 14:39:51.828 09/23/09 Sev=Info/4 CM/0x6310002D Resetting TCP connection on port 10000 28 14:39:51.828 09/23/09 Sev=Info/6 CM/0x63100030 Removed local TCP port 1942 for TCP connection. 29 14:39:51.828 09/23/09 Sev=Info/6 CM/0x63100046 Set tunnel established flag in registry to 0. 30 14:39:51.828 09/23/09 Sev=Info/4 IKE/0x63000001 IKE received signal to terminate VPN connection 31 14:39:52.328 09/23/09 Sev=Info/6 IPSEC/0x63700023 TCP RST sent to RemotePeerIP, src port 1942, dst port 10000 32 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 33 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 34 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 35 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x6370000A IPSec driver successfully stopped Thank you for any help you can provide.

    Read the article

  • Cisco VPNClient from Mac won't connect using iPhone Tethering

    - by Dan Short
    I just set up iPhone tethering from my Snow Leopard Macbook Pro to my iPhone 3GS with the Datapro 4GB plan from AT&T. When attempting to connect to my corporate VPN from the MacBook Pro with Cisco VPNClient 4.9.01 (0100) I get the following log information: Cisco Systems VPN Client Version 4.9.01 (0100) Copyright (C) 1998-2006 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Mac OS X Running on: Darwin 10.6.0 Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386 i386 Config file directory: /etc/opt/cisco-vpnclient 1 13:02:50.791 02/22/2011 Sev=Info/4 CM/0x43100002 Begin connection process 2 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0AD337FF, Src Addr: 0x0AD33702 (DRVIFACE:1158). 3 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0A2581FF, Src Addr: 0x0A258102 (DRVIFACE:1158). 4 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100004 Establish secure connection using Ethernet 5 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100024 Attempt connection with server "209.235.253.115" 6 13:02:50.792 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (500). 7 13:02:50.793 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (4500). 8 13:02:50.793 02/22/2011 Sev=Info/6 IKE/0x4300003B Attempting to establish a connection with 209.235.253.115. 9 13:02:51.293 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 10 13:02:51.894 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 11 13:02:52.495 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 12 13:02:53.096 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 13 13:02:53.698 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 14 13:02:54.299 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. 16 13:02:54.299 02/22/2011 Sev=Warning/2 IKE/0xC300009A Failed to set up connection data 17 13:02:54.299 02/22/2011 Sev=Info/4 CM/0x4310001C Unable to contact server "209.235.253.115" 18 13:02:54.299 02/22/2011 Sev=Info/5 CM/0x43100025 Initializing CVPNDrv 19 13:02:54.300 02/22/2011 Sev=Info/4 CVPND/0x4340001F Privilege Separation: restoring MTU on primary interface. 20 13:02:54.300 02/22/2011 Sev=Info/4 IKE/0x43000001 IKE received signal to terminate VPN connection 21 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700008 IPSec driver successfully started 22 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 23 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000D Key(s) deleted by Interface (192.168.0.171) 24 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 25 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 26 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 27 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000A IPSec driver successfully stopped The key line is 15: 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. I can't find anything online about this. I found a single entry for the error message in Google, and it was a swedish (or some other nordic language site) that didn't have an answer to the question. I've tried connecting through both USB and Bluetooth tethering to the iPhone, and they both return the exact same results. I don't have direct control over the firewall, but if changes are necessary to make it work, I may be able to get the powers-that-be to make adjustments. A solution that doesn't require reconfiguring the firewall would be far better of course... Does anyone know what I can do to make this behave? Thanks, Dan

    Read the article

  • Site-to-site VPN using MD5 instead of SHA and getting regular disconnection

    - by Steven
    We are experiencing some strange behavior with a site-to-site IPsec VPN that goes down about every week for 30 minutes (Iam told 30 minutes exactly). I don't have access to the logs, so it's difficult to troubleshoot. What is also strange is that the two VPN devices are set to use SHA hash algorithm but apparently end up agreeing to use MD5. Does anybody have a clue? or is this just insufficient information? Edit: Here is an extract of the log of one of the two VPN devices, which is a Cisco 3000 series VPN concentrator. 27981 03/08/2010 10:02:16.290 SEV=4 IKE/41 RPT=16120 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27983 03/08/2010 10:02:56.930 SEV=4 IKE/41 RPT=16121 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27986 03/08/2010 10:03:35.370 SEV=4 IKE/41 RPT=16122 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) [… same continues for another 15 minutes …] 28093 03/08/2010 10:19:46.710 SEV=4 IKE/41 RPT=16140 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28096 03/08/2010 10:20:17.720 SEV=5 IKE/172 RPT=1291 xxxxxxxx Group [xxxxxxxx] Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end IS behind a NAT device 28100 03/08/2010 10:20:17.820 SEV=3 IKE/134 RPT=79 xxxxxxxx Group [xxxxxxxx] Mismatch: Configured LAN-to-LAN proposal differs from negotiated proposal. Verify local and remote LAN-to-LAN connection lists. 28103 03/08/2010 10:20:17.820 SEV=4 IKE/119 RPT=1197 xxxxxxxx Group [xxxxxxxx] PHASE 1 COMPLETED 28104 03/08/2010 10:20:17.820 SEV=4 AUTH/22 RPT=1031 xxxxxxxx User [xxxxxxxx] Group [xxxxxxxx] connected, Session Type: IPSec/LAN- to-LAN 28106 03/08/2010 10:20:17.820 SEV=4 AUTH/84 RPT=39 LAN-to-LAN tunnel to headend device xxxxxxxx connected 28110 03/08/2010 10:20:17.920 SEV=5 IKE/25 RPT=1291 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28113 03/08/2010 10:20:17.920 SEV=5 IKE/24 RPT=88 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28116 03/08/2010 10:20:17.920 SEV=5 IKE/66 RPT=1290 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28117 03/08/2010 10:20:17.930 SEV=5 IKE/25 RPT=1292 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28120 03/08/2010 10:20:17.930 SEV=5 IKE/24 RPT=89 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28123 03/08/2010 10:20:17.930 SEV=5 IKE/66 RPT=1291 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28124 03/08/2010 10:20:18.070 SEV=4 IKE/173 RPT=17330 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices. 28127 03/08/2010 10:20:18.070 SEV=4 IKE/49 RPT=17332 xxxxxxxx Group [xxxxxxxx] Security negotiation complete for LAN-to-LAN Group (xxxxxxxx) Responder, Inbound SPI = 0x56a4fe5c, Outbound SPI = 0xcdfc3892 28130 03/08/2010 10:20:18.070 SEV=4 IKE/120 RPT=17332 xxxxxxxx Group [xxxxxxxx] PHASE 2 COMPLETED (msgid=37b3b298) 28131 03/08/2010 10:20:18.750 SEV=4 IKE/41 RPT=16141 xxxxxxxx Group [xxxxxxxx] IKE Initiator: New Phase 2, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28135 03/08/2010 10:20:18.870 SEV=4 IKE/173 RPT=17331 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices.

    Read the article

  • Should I tell a departed coworker about their "sev 1" defect?

    - by noahz
    I had a co-worker leave our company recently. Before leaving, he coded a component that had a severe memory leak that caused a production outage (OutOfMemoryError in Java). The problem was essentially a HashMap that grew and never removed entries, and the solution was to replace the HashMap with a cache implementation. From a professional standpoint, I feel that I should let him know about the defect so he can learn from the error. On the other hand, once people leave a company, they often don't want to hear about legacy projects that they have left behind for bigger and better things. What is the general protocol for this sort of situation?

    Read the article

  • Keyword does not work in dash

    - by sev
    Since the last update of my OS ubuntu 11.10, I am not able to type in the dash. In any other application (like Firefox for this message), the keyboard is working fine, but in the dash "window" of unity (I am not sure what it is called officially), the keyboard is buggy. Sometimes I manage to enter one or two characters, but most of the time nothing appears as if the key-press signal was not received. Before the update, I actually was working with gnome-classic (I had removed unity from oneiric). The update seemed to have reinstalled unity, but something apparently is missing or damaged. Does anybody have a clue about what could be done to repair the dash?

    Read the article

  • timer_getoverrun() doesn't behave as expected when using sleep()

    - by dlp
    Here is a program that uses a POSIX per-process timer alongside the sleep subroutine. The signal used by the timer has been set to SIGUSR1 rather than SIGALRM, since SIGALRM may be used internally by sleep, but it still doesn't seem to work. I have run the program using the command line timer-overruns -d 1 -n 10000000 (1 cs interval) so, in theory, we should expect 100 overruns between calls to sigwaitinfo. However, timer_getoverrun returns 0. I have also tried a version using a time-consuming for loop to introduce the delay. In this case, overruns are recorded. Does anyone know why this happens? I am running a 3.4 Linux kernel. Program source /* * timer-overruns.c */ #include <unistd.h> #include <stdlib.h> #include <stdio.h> #include <signal.h> #include <time.h> // Signal to be used for timer expirations #define TIMER_SIGNAL SIGUSR1 int main(int argc, char **argv) { int opt; int d = 0; int r = 0; // Repeat indefinitely struct itimerspec its; its.it_interval.tv_sec = 0; its.it_interval.tv_nsec = 0; // Parse arguments while ((opt = getopt(argc, argv, "d:r:s:n:")) != -1) { switch (opt) { case 'd': // Delay before calling sigwaitinfo() d = atoi(optarg); break; case 'r': // Number of times to call sigwaitinfo() r = atoi(optarg); break; case 's': // Timer interval (seconds) its.it_interval.tv_sec = its.it_value.tv_sec = atoi(optarg); break; case 'n': // Timer interval (nanoseconds) its.it_interval.tv_nsec = its.it_value.tv_nsec = atoi(optarg); break; default: /* '?' */ fprintf(stderr, "Usage: %s [-d signal_accept_delay] [-r repetitions] [-s interval_seconds] [-n interval_nanoseconds]\n", argv[0]); exit(EXIT_FAILURE); } } // Check sanity of command line arguments short e = 0; if (d < 0) { fprintf(stderr, "Delay (-d) cannot be negative!\n"); e++; } if (r < 0) { fprintf(stderr, "Number of repetitions (-r) cannot be negative!\n"); e++; } if (its.it_interval.tv_sec < 0) { fprintf(stderr, "Interval seconds value (-s) cannot be negative!\n"); e++; } if (its.it_interval.tv_nsec < 0) { fprintf(stderr, "Interval nanoseconds value (-n) cannot be negative!\n"); e++; } if (its.it_interval.tv_nsec > 999999999) { fprintf(stderr, "Interval nanoseconds value (-n) must be < 1 second.\n"); e++; } if (e > 0) exit(EXIT_FAILURE); // Set default values if not specified if (its.it_interval.tv_sec == 0 && its.it_interval.tv_nsec == 0) { its.it_interval.tv_sec = its.it_value.tv_sec = 1; its.it_value.tv_nsec = 0; } printf("Running with timer delay %d.%09d seconds\n", (int) its.it_interval.tv_sec, (int) its.it_interval.tv_nsec); // Will be waiting for signals synchronously, so block the one in use. sigset_t sigset; sigemptyset(&sigset); sigaddset(&sigset, TIMER_SIGNAL); sigprocmask(SIG_BLOCK, &sigset, NULL ); // Create and arm the timer struct sigevent sev; timer_t timer; sev.sigev_notify = SIGEV_SIGNAL; sev.sigev_signo = TIMER_SIGNAL; sev.sigev_value.sival_ptr = timer; timer_create(CLOCK_REALTIME, &sev, &timer); timer_settime(timer, TIMER_ABSTIME, &its, NULL ); // Signal handling loop int overruns; siginfo_t si; // Make the loop infinite if r = 0 if (r == 0) r = -1; while (r != 0) { // Sleeping should cause overruns if (d > 0) sleep(d); sigwaitinfo(&sigset, &si); // Check that the signal is from the timer if (si.si_code != SI_TIMER) continue; overruns = timer_getoverrun(timer); if (overruns > 0) { printf("Timer overrun occurred for %d expirations.\n", overruns); } // Decrement r if not repeating indefinitely if (r > 0) r--; } return EXIT_SUCCESS; }

    Read the article

  • IIS 6 SSL Restore from PFX without Deleting Pending Request

    - by Sev
    I requested a new SSL certificate from a certificate authority, but until they process it my site is losing business. Before doing so, I had backed up the original certificate to a PFX file. Now when I try to restore the backup, it forces me to delete it, or process the request. Since the new one isn't ready yet, is there any way to restore the backup, without deleting the request? Or will it cause any issues if I delete the request to install the new one when it comes in? Server is IIS 6

    Read the article

  • Mac OS X kernel panic after TM restore

    - by Sev
    I changed my HD in my MacBook Pro, and restored from Time Machine backup. Now I keep getting kernel panic error everytime I restart. I booted from the DVD and ran a few tests, noticed that HD and RAM are being detected, also did a repair on the disk through disk utility, still getting same error. Any suggestions?

    Read the article

  • Ctrl-C behavior in gnome-terminal

    - by sev
    I have installed Ubuntu 10.04. It works fine, but when I press Ctrl-C in gnome-terminal I get: user@desktop:~$ ^C user@desktop:~$ ^C user@desktop:~$ In Ubuntu 9.04 (I did have it before) it was so: user@desktop:~$ user@desktop:~$ user@desktop:~$ Who knows how can I fix this?

    Read the article

  • Postgresql by network

    - by sev
    I have running PostgreSQL sever on 192.168.0.102:5432. postgresql.conf has this line: listen_addresses = '*' and pg_hba.conf has this one: host all all 127.0.0.1/32 trust I have Rails app with same config/database.yml development: adapter: postgresql host: 192.168.0.102 port: 5432 encoding: unicode database: test pool: 5 username: test password: But when I run rake db:migrate I get (I run this from 192.168.0.100) FATAL: no pg_hba.conf entry for host "192.168.0.100", user "test", database "postgres", SSL on FATAL: no pg_hba.conf entry for host "192.168.0.100", user "test", database "postgres", SSL off ... Who can help with this?

    Read the article

  • Ctrl-C behavior in gmone-terminal

    - by sev
    I have installed Ubuntu 10.04. It works fine, but when I press Ctrl-C in gnome-terminal I get: user@desktop:~$ ^C user@desktop:~$ ^C user@desktop:~$ In Ubuntu 9.04 (I did have it before) it was so: user@desktop:~$ user@desktop:~$ user@desktop:~$ Who knows how can I fix this?

    Read the article

  • Hard Drive Physical Disc Swap

    - by Sev
    Is it possible, and if so, what would it take to do a hard drive disc swap? If a HD has a damaged PCB board, but the actual disc inside the drive where all the information is stored is not damaged, is it possible to take that disc and put it in another hard drive whose PCB board is not damaged? (as long as both are the same type, SATA to SATA, etc.) Can this be done at home? Any special requirements?

    Read the article

  • how to debug BSOD irql_not_less_or_equal error

    - by Sev
    So I'm getting the irql_not_less_or_equal BSOD. I tried looking at the event viewer for potential causes, and cannot find any. I also checked the CPU temperature in BIOS right after the error and that was fine. I've tried 2 sets of RAM chips already, both give the issues. The error doesn't happen consistently...it happens daily, but many hours can pass and it won't happen, or only 10 minutes can pass and it might happen again. By the way, just bought the parts and built the computer myself a couple of weeks ago. How to debug the cause for this? Hardware info: Asus P6X58D PREMIUM motherboard Intel core i7 930 quad core 2.8 ghz Kingston 128 GB SSD 3 Gb/sec Nvidia Geforce GTX 465 PNY Edition Corsair 12 GB DDR3 1600 Mhz Ram Windows 7 Ultimate

    Read the article

  • SCCM 2012 unable to update boot images with pxe enabled

    - by Adam
    we are fighting an error in sccm 2012. When we attempt to distribute boot images (after selecting the pxe option) we receive an error that the pxe image cannot be expanded (distmgr log). Can you give us any direction on what to try or attempt in this scenario? We only have one dp in our environment at the moment, however we have found that by creating another dp on a different server we don’t have this problem. However we really need the primary site to be a dp. We have tried: Removing and reinstalling the dp Removing and reinstalling the WDS Reinstalled the OS ... ouch Reinstalled SQL We even attempted to manually mount these wims in the remote install folder, no luck... And we have been working on this for days... Any and all help is appreciated! Our log is below Thank you very much, Small Town IT guy Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) The distribution point is on the siteserver and the package is a content type package. There is nothing to be copied over. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OURSERVER.ourdomain.cc.ia.us SITE=IVC PID=3600 TID=6924 GMTDATE=Fri Jun 22 19:49:41.559 2012 ISTR0="Boot image (x86)" ISTR1="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="IVC00001" AID1=404 AVAL1="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) The current user context will be used for connecting to ["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) No network connection is needed to ["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\ as this is the local machine. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Signature share exists on distribution point path \OURSERVER.ourdomain.cc.ia.us\SMSSIG$ SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Ignoring drive C:. File C:\NO_SMS_ON_DRIVE.SMS exists. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) user(NT AUTHORITY\SYSTEM) runing application(SMS_DISTRIBUTION_MANAGER) from machine (OURSERVER.ourdomain.cc.ia.us) is submitting SDK changes from site(IVC) SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Share SMSPKGD$ exists on distribution point \OURSERVER.ourdomain.cc.ia.us\SMSPKGD$ SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Creating, reading and or updating Operations Management server role registry keys for a Distribution Point ... SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) user(NT AUTHORITY\SYSTEM) runing application(SMS_DISTRIBUTION_MANAGER) from machine (OURSERVER.ourdomain.cc.ia.us) is submitting SDK changes from site(IVC) SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Creating, reading or updating IIS registry key for a distribution point. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) IISSSLState in the SCF is 224. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Virtual Directory SMS_DP_SMSPKG$ for the physical path F:\SCCMContentLib already exists. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) STATMSG: ID=2375 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OURSERVER.ourdomain.cc.ia.us SITE=IVC PID=3600 TID=6924 GMTDATE=Fri Jun 22 19:49:42.058 2012 ISTR0="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) Creating, reading or updating IIS registry key for a distribution point. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) IISSSLState in the SCF is 224. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) Virtual Directory SMS_DP_SMSSIG$ for the physical path D:\SMSSIG$ already exists. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) STATMSG: ID=2375 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OURSERVER.ourdomain.cc.ia.us SITE=IVC PID=3600 TID=6924 GMTDATE=Fri Jun 22 19:49:42.105 2012 ISTR0="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) user(NT AUTHORITY\SYSTEM) runing application(SMS_DISTRIBUTION_MANAGER) from machine (OURSERVER.ourdomain.cc.ia.us) is submitting SDK changes from site(IVC) SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) RDC:Successfully created package signature file from \?\F:\SMSPKGSIG\IVC00001.3 to \OURSERVER.ourdomain.cc.ia.us\SMSSIG$\IVC00001.3.tar SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) Setting permissions on file MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\SMSSIG$\IVC00001.3.tar. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) ExpandPXEImage: IVC00001, 1024 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) CContentDefinition::GetFileProperties failed; 0x80070003 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) CContentDefinition::TotalFileSizes failed; 0x80070003 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) ExpandPXEImage failed; 0x80070003 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) DP thread with thread handle 00000000000013A4 and thread ID 6924 ended. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) Updating package info for package IVC00001 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) Package IVC00001 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) The package and/or program properties for package IVC00001 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) StoredPkgVersion (3) of package IVC00001. StoredPkgVersion in database is 3. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) SourceVersion (3) of package IVC00001. SourceVersion in database is 3. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OURSERVER.ourdomain.cc.ia.us SITE=IVC PID=3600 TID=4492 GMTDATE=Fri Jun 22 19:49:42.292 2012 ISTR0="Boot image (x86)" ISTR1="IVC00001" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="IVC00001" SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) Failed to process package IVC00001 after 0 retries, will retry 100 more times SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C)

    Read the article

  • Rails BDD with Cucumber: no such file to load -- cucumber-rails

    - by sev
    I have project on Rails (2.3.5). I add into environment.rb same sting: config.gem "cucumber-rails", run "rake gems:unpack:dependencies". Output of "rake gems": [F] cucumber-rails [F] cucumber = 0.6.2 [F] term-ansicolor = 1.0.4 [F] treetop = 1.4.2 [F] polyglot = 0.3.1 [F] polyglot = 0.2.9 [F] builder = 2.1.2 [F] diff-lcs = 1.1.2 [F] json_pure = 1.2.0 When I run "script/generate cucumber" I get Missing these required gems: cucumber-rails Who can help me to fix this?

    Read the article

  • Problem with cucumber

    - by sev
    I want to make rails app which will require minimum gems. I freeze gems into app and try to run cucumber's test and I've got the an error. Below is sequence of my actions. What I do wrong? rails cucumber && cd cucumber rake rails:freeze:gems add at the end of config/environments/test.rb: config.gem 'gherkin' config.gem 'cucumber-rails' config.gem 'database_cleaner' config.gem 'webrat' rake gems:unpack:dependencies RAILS_ENV=test rake gems:build RAILS_ENV=test rake gems RAILS_ENV=test [F] gherkin [F] trollop = 1.16.2 [F] cucumber-rails [F] cucumber = 0.8.0 [F] gherkin = 1.0.30 [F] trollop = 1.16.2 [F] term-ansicolor = 1.0.4 [F] builder = 2.1.2 [F] diff-lcs = 1.1.2 [F] json_pure = 1.4.3 [F] database_cleaner [F] webrat [F] nokogiri = 1.2.0 [F] rack = 1.0 [F] rack-test = 0.5.3 [F] rack = 1.0 script/generate cucumber rake db:migrate gem uninstall builder cucumber cucumber-rails diff-lcs gherkin json_pure nokogiri rack-test term-ansicolor trollop webrat rake cucumber /usr/bin/ruby1.8 -I "cucumber/vendor/gems/cucumber-0.8.0/lib:lib" "cucumber/vendor/gems/cucumber-0.8.0/bin/cucumber" --profile default /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require': no such file to load -- gherkin (LoadError) from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in require' from cucumber/vendor/gems/cucumber-0.8.0/bin/../lib/cucumber/cli/main.rb:5 from cucumber/vendor/gems/cucumber-0.8.0/bin/cucumber:5:inrequire' from cucumber/vendor/gems/cucumber-0.8.0/bin/cucumber:5 rake aborted! Command failed with status (1): [/usr/bin/ruby1.8 -I "cucumbe...] (See full trace by running task with --trace)

    Read the article

  • How to set a PHP session variable through linux command prompt?

    - by Sev
    How to set a PHP session variable through linux command prompt? Clarification So, as you know we can set session variables in PHP using $_SESSION global variable when coding. I would like to know if there is a way to set this variable through php command prompt? For example, in the code, if I can set $_SESSION['temp'] = "whatever" Is there a way to set the same variable through command prompt PHP?

    Read the article

  • Perl Script in PHP

    - by Sev
    I have a perl script, which takes a query string parameter, connects to a database and displays data. I'd like to include that script in a PHP file like so: include('perlscript.pl?item=302'); Such that the perl script's response is displayed on the PHP/HTML page. How can I do this?

    Read the article

  • Program to find canonical cover or minimum number of functional dependencies

    - by Sev
    I would like to know if there is a program or algorithm to find canonical cover or minimum number of functional dependencies? For example: If you have: R = (A,B,C) <-- these are tables: A,B,C And dependencies: A ? BC B ? C A ? B AB ? C The canonical cover (or minimum number of dependencies) is: A ? B B ? C Is there a program that can accomplish this? If not, any code/pseudocode to help me write one would be appreciated. Prefer in Python or Java.

    Read the article

  • HTML Form Upload PDF with other form contents using PHP

    - by Sev
    I have a HTML form with fields such as name, address, notes, etc. I also have a field to upload a PDF. The uploaded PDF get's stored on the file system. How can I accomplish this if possibly the PDF files are larger than 2 MBs? Also, for some reason, the uploading of the PDF (< 2 MBs) works fine in Chrome, but not in IE. In IE, the upload doesn't even begin, but in Chrome, it completes fine. Form header looks like: method='post' ENCTYPE='multipart/formdata' edit: the ini setting didn't help The HTML <input type='text' name='user' /> <input type='file' name='userfile' /> The basic PHP ( I do some preg matching above, that I haven't included) $uploaddir = 'uploads/'; $uploadfile = $uploaddir . basename($_FILES['userfile']['name']); if (move_uploaded_file($_FILES['userfile']['tmp_name'], $uploadfile)) { echo "File is valid, and was successfully uploaded.\n"; } else { echo "File uploading failed.\n"; }

    Read the article

1 2 3  | Next Page >