Search Results

Search found 24 results on 1 pages for 'smarthost'.

Page 1/1 | 1 

  • Exim4: Deny outgoing emails with specific destination domains to being sent to the smarthost

    - by Yoann P
    I try to deny outgoing emails with specific destination domains to being sent to the smarthost but unsuccessfully. I'm on a debian "squeeze" configured to use a smarthost. vi /etc/exim4/conf.d/acl/30_exim4-config_check_rcpt Add right after "acl_check_rcpt:" deny message = Domain $domain is prohibited for outgoing mails domains = lsearch;/etc/exim4/restricted_domains Reload exim, but the mails to the restricted domains continue to go out I also tried to add the acl_not_smtp after reading this post but without success either. vi /etc/exim4/conf.d/main/02_exim4-config_options Add "acl_not_smtp = acl_check_not_smtp" vi /etc/exim4/conf.d/acl/30_exim4-config_check_rcpt And add at the top of the file acl_check_not_smtp: deny message = Domain $domain is prohibited for outgoing mails domains = lsearch;/etc/exim4/restricted_domains Can anybody point me what i'm doing wrong please? Thanks, Best regards,

    Read the article

  • Using Exim and Google Apps email as smarthost

    - by pferrel
    I have a server setup to use exim4 and google apps as my smarthost. But I get errors when the to address is not the one I use to authenticate to google and it seems to drop all return addresses that are not the one it uses to authenitcate. Example: On the contact form of my server a user sets [email protected] as their return address and uses the form to send a message. I get an email sent to the admin's address [email protected] but the return address is also now [email protected] I have no idea of the return address the user set on the form. I get around this by putting a bad email address in the form's default so Exim4 sends an error message to [email protected] with the user's email in the debug info. Clearly I either have it set up wrong or do not understand how smarthosts work (probably both).

    Read the article

  • authenticating to exchange 2010 smarthost?

    - by Richard Hansen
    I have a postfix mail server that should relay all outgoing mail to an Exchange 2010 server (the Exchange box is my smarthost). I have administrator access to the Exchange 2010 system, but I'm not very familiar with it. How should I set up authentication on the Exchange 2010 system? I guess I could add a standard user with a mailbox on the Exchange box, then configure my postfix box to log in to port 587 to relay mail. That option doesn't feel right -- it seems like there should be way to do server to server authentication, not just client to server authentication. Is there? If so, how would I set it up?

    Read the article

  • Handling bounced email when using a postfix smarthost

    - by Mark Rose
    I'm running a high availability cluster, and so far, most things work great. I have two external machines that act as outgoing mail hosts (smarthosts). The internal hosts are configured to relay all email through these two external facing hosts. My smarthosts' main.cf looks like this: myhostname = lb1.example.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = lb1.example.com, localhost relayhost = mynetworks = 127.0.0.0/8 10.1.248.0/24 My internal hosts' main.cf looks like this: mynetworks = 127.0.0.0/8 myhostname = web1.example.com mydestination = $myhostname, localhost.$mydomain, localhost relayhost = [10.1.248.3] smtp_fallback_relay = [10.1.248.2] lb1's internal IP is 10.1.248.2, and lb2's internal IP is 10.1.248.3. On the external hosts, email for root and www-data is forwarded to [email protected] with /etc/aliases. One advantage to using the smarthost setup is that spam filters and the like can connect back to the sending sending server. All email is sent fine, and headers look like this: Received: from lb2.example.com ([198.51.100.3]) by mx.google.com with ESMTP id y17si1571259icb.76.2011.01.13.18.20.32; Thu, 13 Jan 2011 18:20:32 -0800 (PST) Received-SPF: neutral (google.com: 198.51.100.3 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=198.51.100.3; Received: from db1.example.com (unknown [10.1.248.20]) by lb2.example.com (Postfix) with ESMTP id D364823C0BE for <[email protected]>; Thu, 13 Jan 2011 21:20:31 -0500 (EST) Received: by db1.example.com (Postfix) id C9FA7760D6A; Thu, 13 Jan 2011 21:20:31 -0500 (EST) Delivered-To: www-data@localhost Received: by db1.example.com (Postfix, from userid 0) id C1632760D6C; Thu, 13 Jan 2011 21:20:31 -0500 (EST) The problem is bounced/reject email. The external machine tries to forward the email back to the internal machine, e.g. www-data on web1 sending an email that bounces (such as a user signing up with a bad email address). An additional complication is using Google mail for the main example.com domain. In lieu of specifying every internal host in the external hosts' mydestination, is there a better way of setting things up, keeping in mind I can't adjust touch the mx for example.com?

    Read the article

  • Trying to use a SmartHost with my Exchange 2010 server

    - by Pure.Krome
    Hi folks, I'm trying to use a SmartHost with my Exchange 2010 Server. SmartHost details: Secure SMTPS: securemail.internode.on.net 465 <-- Note: that's port 465 Configure your existing SMTP settings (in your email program) to: use authentication (enter your Internode username and password, enter your username as [email protected]). enable SSL for sending email (SMTPS). So I've added the smart host details to my Org Config -> Hub Transport. I then used PowerShell to add the port:- Set-SendConnector "securemail.internode.on.net" -port 465 I've then added my username/password (as suggested above) to the SmartHost as Basic Authentication (with no TLS). Then I try sending an email and I get the following error message :- 451 4.4.0 Primary target IP address responded with: "421 4.4.2 Connection dropped due to ConnectionReset." So i'm not sure how to continue. I also tried ticking the TLS box but stll I get the same error. If i don't use SMTPS (secure SMTP, on port 465) and use basic SMTP on port 25 with no Authentication, email gets sent. Any ideas? EDIT: Btw, I can telnet to that server on port 465 from my mail server .. just to make sure i'm not getting firewall'd, etc.

    Read the article

  • Postfix smarthost with diffent relayhosts and sender dependant authentication

    - by mattinsalto
    I've setup postfix as smarthost with different relayhosts and sender dependant authentication. Everything works ok, but I have a performance question. Is it better to send all the email corresponding to a domain through only one account? I mean, now I'm sending each message authenticating to the relay host with the sender credentials. Example: If I have 5 email accounts and I send 10 simultaneous messages from each account, How many times is postfix login to the relay host if I have sender dependant authentication? 5 times? once for each sender 50 times? once for each message If I send all the messages corresponding to one realy host through one account, how many times does postfix login to the relay host? only once? Thanks in advance.

    Read the article

  • Switch smarthosts in Exchange when using dual WAN

    - by mat0ng
    Hi everybody, I'd like to know if it's possible to setup Exchange 2003/2007 to switch between smarthosts, based on the WAN connection currently in use. Example scenario: I have two WAN connections with different ISP's. Exchange is running behind a dual WAN router. The router is setup to fall back to secondary WAN when primary WAN fails. The smarthost set in Exchange is the SMTP server of the primary ISP. Because the smarthost set in Exchange only allows relaying from IP's of the primary WAN sending mail won't work when the router falls back to the secondary WAN. Sending mail directly through DNS MX lookup is an option but the ISP's have dynamic IP's that get blacklisted a lot. Thanks in advance!

    Read the article

  • Postfix sendmail -f configuration

    - by William
    I have Postfix installed on two servers. One of them writes e-mail (satellite) and the other one delivers the e-mails (smarthost). When I write e-mail from the satellite server I'm using the sendmail command. My problem is that when e-mail arrives the Return-Path is set to the user@hostname where user is the user that is running sendmail and hostname is the servers hostname. If I use the parameter -f with sendmail I change that, but I'm hoping there is a way to do it in a configuration file for Postfix. Is this possible or should I just deal with having to configure all my software to add the -f argument? Thanks in advanced.

    Read the article

  • Exim4 Smart Host Relay

    - by ColinM
    I am running Exim 4.71. I want to: Route all email from A.com through mail.A.com Route all email from [B-E].com through mail.B.com Send all other email directly. Here is the configuration I have that doesn't work like I hoped: domainlist a_domains = a.com domainlist b_domains = b.com : c.com : d.com : e.com begin routers smart_route_a: driver = manualroute domains = +a_domains transport = remote_smtp route_list = +a_domains mail.a.com no_more smart_route_b: driver = manualroute domains = +b_domains transport = remote_smtp route_list = +b_domains mail.mollenhour.com no_more dnslookup: driver = dnslookup domains = ! +local_domains transport = remote_smtp ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 no_more When I send an email e.g. with PHP's mail() or Zend_Mail_Transport_Smtp setting both From: and Return-Path: as [email protected], the smart_route_a router is not used, the dnslookup is used instead. Disabling dnslookup results in no mail being sent. From the logs it appears that email sent to [email protected] uses smart_route_a, but the same email sent from [email protected] to [email protected] is sent using dnslookup. How do I make email from [email protected] be relayed via mail.a.com?

    Read the article

  • IIS SmtpSVC - Adding remote domains on the fly

    - by Andrej Pintar
    Since I am using SMTPSVC from IIS to send all mail out I have noticed some domains that reject mail regarding LFs and similar SMTP day to day basis problems. So I mostly re route these domains by using smarthosts. Now I aslo read that on IIS7 or most of them when you add a remote domain to domains you must restart SMTPSVC to take effect. I also enabled METABASE editing. So I also hoped that this will help me add remote domains on the fly. But it's not working. Should I use another SMTP: -hmailserver or similar to route DOMAINS by smarthost. We used a smarthost configuration before but ISP smarthost gets a lot on RBL Blacklist so mail comes back. Since DNS MX direct sending is more work because of troublesome domains now I got more work to monitor SMTP logs. Thank you in advance.

    Read the article

  • exim4 redirect mail sent to *@domain1.example.com to *@domain2.example.com

    - by nightcoder
    Current situation: We have a VPS that hosts a website example.org. Exim is configured to work as a smarthost. All emails sent through exim are successfully relayed to another mail server (that is working on example.com). Goal: To forward mail sent to *@example.org to *@example.com, i.e. change the recipient's address from *@example.org to *@example.com. Problem: If I send email to address *@example.org, then it seems exim doesn't change the address, it still relays the message to another mail server but recipient is still *@example.org. Maybe the redirect is not applied for some reason. Configuration and logs: /etc/exim4/update-exim4.conf.conf: dc_eximconfig_configtype='smarthost' dc_other_hostnames='' dc_local_interfaces='' dc_readhost='example.org' dc_relay_domains='example.org' dc_minimaldns='false' dc_relay_nets='0.0.0.0/32' dc_smarthost='example.com::26' CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='true' dc_mailname_in_oh='true' dc_localdelivery='maildir_home' /etc/exim4/conf.d/router/999_exim4-config_redirect (created by me): domain_redirect: debug_print = "R: forward for $local_part@$domain" driver = redirect domains = example.org data = [email protected] (for now data is set to a specific address for simplicity and testing) exim log when sending email to [email protected] (should be redirected to [email protected]): 2012-03-20 19:40:07 1SA4ud-0005Dw-7k <= [email protected] U=www-data P=local S=657 2012-03-20 19:40:08 1SA4ud-0005Dw-7k => [email protected] R=smarthost T=remote_smtp_smarthost H=domain2.com [184.172.146.66] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,2.5.4.17=#13053737303932,ST=TX,L=Houston,STREET=Suite 400,STREET=11251 Northwest Freeway,O=HostGator.com,OU=HostGator.com,OU=Comodo PremiumSSL Wildcard,CN=*.hostgator.com" 2012-03-20 19:40:08 1SA4ud-0005Dw-7k Completed So, the address is not changed :( Please help! I'm trying to make it work for half a day already :(

    Read the article

  • SMTP Verb Error on MSExchange Server 2003

    - by Jason Adams
    Hi, Every morning for the last two weeks or more I've had to reboot our Exchange Server and often I have to reboot it again during the day. We use a smarthost for sending our mail out and if I view the queues on Exhange System Manager the Small Business SMTP Connector is in a retry state with "The connection was dropped due to an SMTP protocol event sink". I turned logging up to maximum on ExchangeTransport and the only non-information event in EventViewer is “Message delivery to the host '62.13.128.187' failed while delivering to the remote domain 'mail.authsmtp.com' for the following reason: The connection was dropped due to an SMTP protocol event sink. The SMTP verb which caused the error is 'x-exps'. The response from the remote server is ''.” I stopped using the smarthost during the error condition and all I got was lots of small business connector connections with the same error. I can telnet into mail.authsmtp.com and send a mail during the error state. Any pointers would be gratefully received.

    Read the article

  • Disable reverse PTR check in Zimbra and force accept from invalid domains

    - by ewwhite
    I've moved an older Sendmail/Dovecot system to a Zimbra community edition system. I need to be able to receive messages from certain standalone Linux hosts that may not have valid A records or proper reverse DNS entries established (e.g. AT&T is the ISP or systems sitting on a consumer-level ISP). Establishing the reverse DNS or setting a SMARTHOST is not an option. The error I get in zimbra.log is: zimbra postfix/smtp[2200]: DB83B231B53: to=<root@host_name.baddomain.com>, relay=none, delay=0.07, delays=0.06/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=host_name.baddomain.com type=A: Host not found How can I override this? Is this more of a Postfix issue or is it Zimbra? edit - The problem seems to be with an underscore in the hostname of the server. So it's a problem with root@host_name.baddomain.com. Again, how can I override this in Zimbra?

    Read the article

  • AXway/tumbleweed EMF in exchange 2007

    - by Buckwheat
    Looking for someone who has implemented an axway EMF recently. I'm about to implement an axway SM product for company wide email encryption. I current have an edge transport server and an exchange 2007 server. I want to route email like the follow: the edge picks up internet email to exchange and all out going email will go out the axway. I have two things to figure out: do I only have to build a new send connector on exchange to point to a smarthost (axway) and disable the send connector going to the transport edge server? and two The axway server has to route notifcations to people. Am I looking into something like this? http://msexchangeteam.com/archive/2006/12/28/432013.aspx

    Read the article

  • Messages released from MailScanner quarantine are marked as DUPLICATEDELIVER in Exchange 2007

    - by kdl
    I have installed Postfix with MailScanner on CentOS 5.4 as a smarthost for Exchange 2007. When a message gets quarantined and I later release it (http://wiki.mailscanner.info/doku.php?id=documentation%3Aconfiguration%3Amta%3Apostfix%3Ahow%5Fto%3Arelease%5Fquarantined%5Fmail), it gets delivered to the Exhcange box but does not appear in a user's mailbox. Exchange message tracking log shows the message is marked as DUPLICATEDELIVER and therefore dropped. How can I work around this situation? Maybe changing a message ID somehow while at the Postfix box or some other way? Thanks.

    Read the article

  • Exchange 2013 Internal Relay via Smart Host

    - by Matt Clements
    Thank you for your help in advance! I am currently setting up an Exchange 2013 server, to replace our old POP3/SMTP system, however we would like to roll this out gradually when convenient for our staff. Our plan is therefore: Setup Exchange 2013 to retrieve email via POP Connector - Done Setup Exchange 2013 to send ALL mail via a SmartHost - Issues I have set the domains in Mail Flow Accepted Domains to Internal Relay, enabled a Smart Host for * as the domain name, and disabled/deleted the accounts that are not setup yet; however Exchange just bounces the emails with no errors.

    Read the article

  • email spam filering in bridging

    - by User4283
    I've a mail server, which handle multiple domains. Due to concern of spam and mail server performance. I've configured another machine which will be in bridging and mail server would be behind that it. How can i filter spam emails in bridging server without running any smtp services. Scenario Internet +------+ Spamfilter Server (in bridging mode) +---------+ MailServer SmartHost will work for outgoing email. In this scenario i can filter all incoming emails. There is also another option of DNS which i don't want to use.

    Read the article

  • Configuring external SMTP server on Azure VM - messages staying in queue

    - by Steph Locke
    I have an external SMTP provider: auth.smtp.1and1.co.uk I am trying to send SQL Server Reporting Services emails via this on an Windows 2012 Azure VM. It is configured sufficiently correctly for emails to be generated, but I've not configured something or mis-configured something as the emails then stay in the queue. Setup details Configured SMTP Virtual Server General: IP Address: Fixed value Access: Access Control: Authentication: ticked Anonymous access Access: Connection Control: All except the list below (which is empty) Access: relay restrictions: Only the list below (which contains 127.0.0.1), ticked 'allow all..' option Delivery: Outbound Security...:Basic Authentication with username and password completed, ticked TLS encryption Delivery: Outbound connections...:TCP port=587 Delivery: Advanced: FQDN=ServerName, smarthost=auth.smtp.1and1.co.uk I then set the following SSRS rsreportserver.config values: <SMTPServer>100.92.192.3</SMTPServer> <SendUsing>2</SendUsing> <SMTPServerPickupDirectory> c:\inetpub\mailroot\pickup </SMTPServerPickupDirectory> <From>[email protected]</From> Tried so far 1) turning the smtp service off and on again (just in case) 2) run SMTPDiag with no errors (also no emails) 3) tried turning off the firewall for the ports (and more generally to see if it made a difference) 4) tried generation from powershell which resulted with message in queue 5) added 25 and 857 as endpoint 6) perused the event log and found some warnings that appear to be about the recipient Message delivery to the remote domain 'gmail.com' failed for the following reason: Unable to bind to the destination server in DNS. Message delivery to the host '212.227.15.179' failed while delivering to the remote domain 'gmail.com' for the following reason: The remote server did not respond to a connection attempt. 7) tried pinging but this appears to be blocked on azure 8) tried more powershell sending on different domains variants (localhost, boxname, internal ip used in smtp properties, 127.0.0.1) - none resulting in success 9) tried adding a remote domain - no change Could anyone recommend what step 10 should be in fixing this issue please?

    Read the article

  • Postfix with relayhost - relay access denied for bounces

    - by Alex
    I have set up a Postfix Mailserver, outgoing mail is being sent through a smarthost/relayhost which requires authentification. That works great, internal clients can send to foreign recipients though this relayhost. However, when an external mail for a local, non-existent user arrives at the server, postfix tries to send a non-delivery notification to the sender. This mail is also sent through the relayhost obviously, but it fails with error 554 5.7.1 : Relay access denied This gets logged to the mail.log: Nov 9 10:26:42 mail postfix/local[5051]: 6568CC1383: to=<[email protected]>, relay=local, delay=0.13, delays=0.02/0.02/0/0.09, dsn=5.1.1, status=bounced (unknown user: "test") Nov 9 10:26:42 mail postfix/cleanup[5045]: 85DF9BFECD: message-id=<[email protected]> Nov 9 10:26:42 mail postfix/qmgr[4912]: 85DF9BFECD: from=<>, size=3066, nrcpt=1 (queue active) Nov 9 10:26:42 mail postfix/bounce[5052]: 6568CC1383: sender non-delivery notification: 85DF9BFECD Nov 9 10:26:42 mail postfix/qmgr[4912]: 6568CC1383: removed Nov 9 10:26:43 mail postfix/smtp[5053]: 85DF9BFECD: to=<[email protected]>, relay=mail.provider.com[168.84.25.111]:587, delay=0.48, delays=0.02/0.01/0.26/0.18, dsn=5.7.1, status=bounced (host mail.provider.com[168.84.25.111] said: 554 5.7.1 <[email protected]>: Relay access denied (in reply to RCPT TO command)) Nov 9 10:26:43 mail postfix/qmgr[4912]: 85DF9BFECD: removed According to this error, I suppose that postfix does not login at the relayhost when sending those bounces. Why? Normal outgoing mail works just fine. This is how my main.cf looks like: http://pastebin.com/Uu1Dryxy And of course /etc/postfix/sasl_password contains the correct credentials for the relayhost. Thanks in advance!

    Read the article

  • Exchange 2013 attachments too big?

    - by KPS
    I am having the toughest time sending large attachments, everywhere I have checked my file size limit for send/receive is 100mb but yet users are unable to receive files even at the size of 14mb. I'm using a spam filter (Appriver) and have worked with there support for a very long time, we see the following errors in logs 13:32:40.260 4 SMTP-000036([myserverIP]) rsp: 354 Start mail input; end with <CRLF>.<CRLF> 13:33:41.038 3 SMTP-000033([myserverIP]) write failed. Error Code=connection reset by peer 13:33:41.038 3 SMTP-000033([myserverIP]) [659500] failed to send. Error Code=connection reset by peer 13:33:41.038 4 SMTP([myserverIP]) [659500] batch reenqueued into tail Windows firewall is disabled on the exchange server, all other emails that are of smaller value come through just fine. Here is a print out of size limits: ConnectorType ConnectorName MaxReceiveMessageSize MaxSendMessageSize ------------- ------------- --------------------- ------------------ Send InternetSendConnector - 35 MB (36,700,160 bytes) Send Appriver-Smarthost - 35 MB (36,700,160 bytes) Receive Default EXCHSRVR 100 MB (104,857,600 bytes) - Receive Client Proxy EXCHSRVR 100 MB (104,857,600 bytes) - Receive Default Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive Outbound Proxy Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive Client Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive ExchangeRelay 100 MB (104,857,600 bytes) - TransportConfig - 100 MB (104,857,600 bytes) 10 MB (10,485,760 bytes) ADSiteLink DEFAULTIPSITELINK Unlimited Unlimited There is a no anti-virus on the server either that could be interfering, I am out of ideas at this point :( EDIT 1 After running BPA, it gives and error: Exchange Organization: Check whether the incoming message(CN=MyDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=WG,DC=local) size isn't set The maximum incoming message size isn't set in organization 'CN=MyDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=WG,DC=local'. This can cause reliability problems. Here are the sizes as of now: [PS] C:\Temp>Get-TransportConfig | ft MaxSendSize, MaxReceiveSize MaxSendSize MaxReceiveSize ----------- -------------- Unlimited Unlimited [PS] C:\Temp>Get-ReceiveConnector | ft name, MaxMessageSize Name MaxMessageSize ---- -------------- Default EXCHSRVR 100 MB (104,857,600 bytes) Client Proxy EXCHSRVR 100 MB (104,857,600 bytes) Default Frontend EXCHSRVR 100 MB (104,857,600 bytes) Outbound Proxy Frontend EXCHSRVR 100 MB (104,857,600 bytes) Client Frontend EXCHSRVR 100 MB (104,857,600 bytes) ExchangeRelay 100 MB (104,857,600 bytes) Again, smaller emails come through just fine. Seems like there is a 10mb receive limit somewhere that I cannot find.

    Read the article

  • SMTP message rate control on Ubuntu 8.04, preferably with postfix

    - by TimDaMan
    Maybe I am chasing a bug but I am trying to set up a smtp proxy of sorts. I have a postfix server which receives all the email for a collection of servers/clients. It them uses a smarthost (relayhost=...) to forward it's mail to our corporate MTA. I would like to limit the number of messages an individual server can relay to prevent swamping the corporate MTA. Postfix has a program called "anvil" that is capable of tracking stats about mail to be used for such things but it doesn't seem to be executed. I ran "inotifywait -m /usr/lib/postfix/anvil" while I started postfix and sent a number of messages through it from a remote server. inotifywait indicated anvil was never run. Anyone gotten postfix/anvil rate controls to work? main.cf smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no myhostname = site-server-q9 alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost relayhost = Out outgoing mail relay mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 10.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = 10.X.X.X smtpd_client_message_rate_limit = 1 anvil_rate_time_unit = 1h master.cf extract anvil unix - - - - 1 anvil smtp inet n - - - - smtpd

    Read the article

  • Messages stuck in SMTP queue - Exchange 2003

    - by Diav
    I need your help people ;-) I have a problem with messages coming into our Exchange Server and ones going out through it. Basically, the messages are stuck in the SMTP queue. A message will come into the server, I can see it listed under "Exchange System Manager", but if you list the properties of the message queue it says something like 00:10 SMTP Message queued for local delivery 00:10 SMTP Message delivered locally to [email protected] 00:10 SMTP Message scheduled to retry local delivery 00:11 SMTP Message delivered locally to [email protected] 00:11 SMTP Message scheduled to retry local delivery etc etc For outgoing message list looks like this: 10:55 SMTP: Message Submitted to Advanced Queuing 10:55 SMTP: Started Message Submission to Advanced Queue 10:55 SMTP: Message Submitted to Categorizer 10:55 SMTP: Message Categorized and Queued for Routing 10:55 SMTP: Message Routed nad Queued for Remote Delivery And the end - since then status didn't change, message is in queue, I am forcing connection from time to time but without an effect. I checked connection with smarthost (used telnet for that) and everything seems to work correctly, so the problem is probably on exchange side. I am using Exchange Server 2003 running on Small Business Server 2003. I don't have any antivirus installed on server. Remaining free space on each partition is over 3Gb, on partition with data bases - it is over 12Gb. All was working good and without problems since 2005, problems started in half of this june - messages started going out and being stuck almost randomly (I don't see a pattern yet, some are going out, some are not, some are going after several hours). I don't know what to do, what to check more, so please, any ideas? Best regards, D. edit Priv1.edb has 14,5GB and priv1.stm 2,6GB - together those files have more than 16GB - can it be the reason? If yes, then what? Indeed, I haven't thought that it can have something in common with my problem, but several users reported recent problems with Outlook Web Access - they can log in, they see the list of their mails, but they can't see the content of their emails. Although when they are connecting with Outlook 2003/2007 - there is no such problem, only with OWA there is. edit2 So,.. It works now, and I have to admit that I am not really sure what the problem was (hope it won't come back). What have I done: Cleaned up some mailboxes to reduce size of them Dismounted Information Store Defragmentated data base files ( I used eseutil: c:\program files\exchsrvr\bin eseutil /d g:\data base\Exchsrvr\MDBDATA\priv1.edb ) Mounted Information Store back ..and before I managed to do anything else - my queue started moving, elements which were kept there already for days - started moving and after few minutes everything was sent, both, outside and locally. But: priv1.edb is still big (13 884 203 008), priv1.stm as well (2 447 384 576), so this is probably not the issue of size of the file. And if not this, so what was that? And if that was issue of size of the file, then soon it will repeat - is there something I can do to avoid it ?

    Read the article

  • Email sent from Centos end up in user spam folder

    - by oObe
    I am facing this issue, I use the default postfix MTA in centos but the mail end up in user spam folder, but this does not seem to be a problem in Debian using exim4, both host have hostname and domain name configured, and relay mail through external smtp host. Both configuration and recieving email header are attached. The different seems that Debian has this additional (envelope tag) and (from) tag other than some minor syntax differences. Any help to resolve is appreciated. The IP address and DNS is masked as follow: 1.2.3.4 = My IP address smtp.host.com = external smtp host for my company [email protected] = account at smtp host centos.abc.com = Local centos server debian.abc.com = Local debian server Thanks. Centos main.cf config with the following params configured myhostname = centos.abc.com mydomain = abc.com myorigin = centos.abc.com relayhost = smtp.host.com Centos - User receiving mail header Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 13:36:49 +0800 Received: by centos.abc.com (Postfix, from userid 0) id 1E0637B89; Fri, 28 Sep 2012 13:36:39 +0800 (SGT) Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 13:36:49 +0800 Received: by centos.abc.com (Postfix, from userid 0) id 1E0637B89; Fri, 28 Sep 2012 13:36:39 +0800 (SGT) Date: Fri, 28 Sep 2012 13:36:39 +0800 To: [email protected] Subject: Test mail from centos User-Agent: Heirloom mailx 12.4 7/29/08 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <[email protected]> From: [email protected] (root) X-SmarterMail-TotalSpamWeight: 0 X-Antivirus: avast! (VPS 120926-1, 27/09/2012), Inbound message X-Antivirus-Status: Clean http://i.imgur.com/7WAYX.jpg Debain exim4 config .... # This is a Debian specific file dc_eximconfig_configtype='smarthost' dc_other_hostnames='debian.abc.com' dc_local_interfaces='127.0.0.1 ; ::1' dc_readhost='debian.abc.com' dc_relay_domains='smtp.host.com' dc_minimaldns='false' dc_relay_nets='127.0.0.1' dc_smarthost='smtp.host.com' CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='true' dc_mailname_in_oh='true' dc_localdelivery='mail_spool' debian - User receiving mail header Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 15:02:53 +0800 Received: from root by debian.abc.com with local (Exim 4.72) (envelope-from <[email protected]>) id 1TH86d-00010v-G9 for [email protected]; Thu, 27 Sep 2012 15:01:55 +0800 Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 15:02:53 +0800 Received: from root by debian.abc.com with local (Exim 4.72) (envelope-from <[email protected]>) id 1TH86d-00010v-G9 for [email protected]; Thu, 27 Sep 2012 15:01:55 +0800 Date: Thu, 27 Sep 2012 15:01:55 +0800 Message-Id: <[email protected]> To: [email protected] Subject: Test from debian From: root <[email protected]> X-SmarterMail-TotalSpamWeight: 0 X-Antivirus: avast! (VPS 120926-1, 27/09/2012), Inbound message X-Antivirus-Status: Clean http://imgur.com/nMsMA.jpg

    Read the article

  • CodePlex Daily Summary for Friday, March 04, 2011

    CodePlex Daily Summary for Friday, March 04, 2011Popular ReleasesyoutubeFisher: YouTubeFisher v3.0 Beta: Adding support for more video formats including the Super HD (e.g. http://www.youtube.com/watch?v=MrrHs2bnHPA) Minor change related to the video title due to change in YouTube pageSnippet Designer: Snippet Designer 1.3.1: Snippet Designer 1.3.1 for Visual Studio 2010This is a bug fix release. Change logFixed bug where Snippet Designer would fail if you had the most recent Productivity Power Tools installed Fixed bug where "Export as Snippet" was failing in non-english locales Fixed bug where opening a new .snippet file would fail in non-english localesChiave File Encryption: Chiave 1.0: Final Relase for Chave 1.0 Stable: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.2 to 1.0: ==================== Added: > Added Icon Overlay for Windows 7 Taskbar Icon. >Added Thumbnail Toolbar buttons to make the navigation easier...AutoLoL: AutoLoL v1.6.3: Fixes some bugs in the previous releaseNetwork Monitor Decryption Expert: NMDecrypt 2.3: The NMDecryption Expert has been updated. In general these changes are: Updated Logging Support for multiple sessions that use the same cert with Session ID resuse. Fixed some bugs with IPv6 traffic and tunneled traffic Updated Version Info Made changes for assignment to Outercurve Foundation See the release blog for more information.DirectQ: Release 1.8.7 (RC1): Release candidate 1 of 1.8.7Chirpy - VS Add In For Handling Js, Css, DotLess, and T4 Files: Margogype Chirpy (ver 2.0): Chirpy loves Americans. Chirpy hates Americanos.ASP.NET: Sprite and Image Optimization Preview 3: The ASP.NET Sprite and Image Optimization framework is designed to decrease the amount of time required to request and display a page from a web server by performing a variety of optimizations on the page’s images. This is the third preview of the feature and works with ASP.NET Web Forms 4, ASP.NET MVC 3, and ASP.NET Web Pages (Razor) projects. The binaries are also available via NuGet: AspNetSprites-Core AspNetSprites-WebFormsControl AspNetSprites-MvcAndRazorHelper It includes the foll...Document.Editor: 2011.9: Whats new for Document.Editor 2011.9: New Templates System New Plug-in System New Replace dialog New reset settings Minor Bug Fix's, improvements and speed upsTortoiseHg: TortoiseHg 2.0: TortoiseHg 2.0 is a complete rewrite of TortoiseHg 1.1, switching from PyGtk to PyQtSandcastle Help File Builder: SHFB v1.9.2.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. NOTE: The included help file and the online help have not been completely updated to reflect all changes in this release. A refresh will be issue...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...New Projects.NET Serial To TCP proxy server: serial2tcp written to share your hardware serial ports as TCP port. You can easily turn your physical PC into terminal server. View session input/output or send commands to the physical port. Very useful when automating work with embedded devices. Developed in C#.Amazon SES SMTP: The C# code for a simple SMTP Server that forwards emails to Amazon Simple Email Service, either by acting as a SmartHost behind IIS SMTP Server or as a standalone SMTP server. It can be run in the background as either a Windows Service or a Console/Windows Application Azure Membership, Role, and Profile Providers: Complete ASP.NET solution that uses the Azure Table Storage and Azure Blob storage as a data source for a custom Membership, Role, and Profile providers. Developed in C# on the .NET 4 framework using Azure SDK V1.3. Helps you get up and running with Azure in no time. MIT license.CRM 2011 Code Snippets for Visual Studio: A set of JavaScript and C# code snippets to facilitate common Microsoft Dynamics CRM 2011 development for Visual Studio 2010.DDRMenu: DDRMenu is a templated menu provider for DotNetNuke that can produce any menu style you wish. In particular it comes with templates to upgrade a standard DNNMenu or SolPartMenu to provide true hyperlinks, SEO friendliness and animated transitions.Entity Framework CTP5 Extensions Library: The ADO.NET Entity Framework Extensions library contains a set of utility classes with additional functionality to Entity Framework CTP5.eTrader Pro: An easy-to-use, lightweight and customisable e-commerce solution developed in ASP.NET and SQL Server. Build an online shop in no time. Skin using ASP.NET themes. Localised for English and Spanish with integral CMS, order management and e-marketing tools.euler 12 problem: euler 12 problemeuler 19 problem: euler 19 problemeuler23: euler 23eXed: eXed (eXtended XML editor) is an XSD-based XML editor, i.e. it assumes that you have a working XSD file. The XSD is used to improve your editing experience, provide you with dynamic help, and validation. It is therefore not for those who want to write an XML file from scratch.FIM PowerShell Workflow Activity: The FIM WF Activity for PowerShell makes is easy to use PowerShell inside FIM workflows. The activity is also a good example of using diagnostic tracing inside FIM WF.FremyCompany Math Equation Editor: A WPF Component that can import MathML and LaTeX to be edited in a WYSIWYG word processor. It is intended to allow both visual and computer-comprehensive (formula in programming language) exportation. Scope and functionnalites are intended to be expanded over time.Geenie OS: A New Cosmos OSGeoBot: Monitoring and ControllingiRODS .NET: To be populated laterLicensePlateRecognition: A software for recognizing a car license plate number.LINQ for .NET 2.0: Backport of LINQ and Linq.Dynamic to the .NET Framework 2.0. The sources used to port it are taken from the mono project. http://ftp.novell.com/pub/mono/sources-stable/ It requires Visual Studio 2010 to compile. It won't compile on Visual Studio 2005.mobilestandards: MobileStandards project-creating a web2.0 BannerMy MVC store Implementation: My implementation of MVC music storeOrchard Localization JP: Localizing Project of Orchard. This project is intended to host localizing project to Japanes. Orchard ???????????。 ??????????、???????????????????。 ???????????。Paragon: Expands the basic functionality of the .NET Framework. It takes into consider basic defensive coding practices and reduces the common coding tasks.Project Unity: Research and EUA, spamming across the Halo-AA and Blam Game Engines, developed by Bungie LLC. This Project is NOT endorsed/supported by Bungie, Gearbox, Microsogy Game Studios In any way.Rabbit Framework: A lightweight framework for building dynamic web sites using ASP.NET Web Pages.ScrollableList: Just to make the project looking betterSharePoint Kerberos Buddy: The SharePoint Kerberos Buddy provides an intelligent client application that examines a mixed tier SharePoint environment locating commonly misconfigured Kerberos configuration elements. The application can detect errors on SharePoint, SSAS, SSRS, and on the client.SMI 2.0: This project is the creation of the next generation of the SMI app (previously written in VB6).SPChainGang: SPChainGang is a custom application aimed to simplify scanning, reporting, and fixing broken links in a SharePoint 2007 or SharePoint 2010 farm. SPProperties: SPProperties is a console app (command-line) that allows listing all properties of an SPWeb (property bag) and adding or updating properties. Relates to SharePoint site properties.State Machine DSL: State Machine DSL is extension to Visual Studio 2010 to provide simple and visualized way of programming state machines. It uses T4 Text Templates for code generation.tBrowser: Browser based on the IEuMoveDocType: uMoveDocType attempts to intelligently move your selected Umbraco Doc Type to a new parent.Virtual 8085: Virtual 8085 is a tool which enables students to run programs written in 8085 assembly language on a personal computer instead of a microprocessor kit. Virtual 8085 do not actually simulate the real hardware of Intel 8085, but it interprets the 8085 assembly language programs.WinAppTranslate: WinAppTranslate or WAT, Helps Visual Studio Programmers to translate Windows Applications. It is not based on the framework localization program… and it is a console application to run via VS post builds ????: ??????

    Read the article

1