Search Results

Search found 27932 results on 1118 pages for 'finite state machine'.

Page 1013/1118 | < Previous Page | 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020  | Next Page >

• Can ping device from one computer and not the other

  - by Sean Duggan

  I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

  Read the article

• JOAL with JNLPAppletLauncher Problem

  - by user347445

  Hi, I am developing a Java Applet that makes use of JOAL. In order to avoid annoying dialogues I wanted to load JOAL with the JNLPAppletLauncher as it is shown on https://jogl-demos.dev.java.net/applettest-joal.html Unfortunately with this approach I get this exception: JNLPAppletLauncher.loadLibrary("joal_native") loading: C:\Users\Barbara\AppData\Local\Temp\jnlp-applet\jln7379734545861869319\jln1640167325490042232\joal_native.dll Exception in thread "AWT-EventQueue-2" java.lang.RuntimeException: Can not get proc address for method "alcCaptureCloseDevice": Couldn't set value of field "_addressof_alcCaptureCloseDevice" in class net.java.games.joal.impl.ALCProcAddressTable at com.sun.gluegen.runtime.ProcAddressHelper.resetProcAddressTable(ProcAddressHelper.java:113) at net.java.games.joal.impl.ALProcAddressLookup.resetALCProcAddressTable(ALProcAddressLookup.java:109) at net.java.games.joal.impl.ALCImpl.alcOpenDevice(ALCImpl.java:341) at net.java.games.joal.util.ALut.alutInit(ALut.java:69) at demos.devmaster.lesson1.SingleStaticSource.initialize(SingleStaticSource.java:194) at demos.devmaster.lesson1.SingleStaticSource.access$000(SingleStaticSource.java:57) at demos.devmaster.lesson1.SingleStaticSource$1.actionPerformed(SingleStaticSource.java:79) at javax.swing.AbstractButton.fireActionPerformed(Unknown Source) at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.setPressed(Unknown Source) at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source) at java.awt.Component.processMouseEvent(Unknown Source) at javax.swing.JComponent.processMouseEvent(Unknown Source) at java.awt.Component.processEvent(Unknown Source) at java.awt.Container.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) Caused by: java.lang.RuntimeException: Unable to find and load OpenAL library at net.java.games.joal.impl.ALProcAddressLookup$DynamicLookup.dynamicLookupFunction(ALProcAddressLookup.java:66) at com.sun.gluegen.runtime.ProcAddressHelper.resetProcAddressTable(ProcAddressHelper.java:106) ... 30 more I am using Firefox 3.6.3, Java 1.6._017 and am on a Windows 7 Machine. I also tried this on another computer with Windows XP and on one with Linux, always with the same result, so it does not seem to be specific for my computer. I also get the same result for IE8. Any ideas how I could fix this? Thank you very much.

  Read the article

• Registry access error when Migrating ASP.NET application to IIS7

  - by fande455

  I'm running windows 7 64-bit and iis7. I'm trying to setup a web application that was previously in iis6 on XP. It's giving me the error below. I've added the network service user to the Performance Monitor Users group to no avail. Access to the registry key 'Global' is denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UnauthorizedAccessException: Access to the registry key 'Global' is denied. ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via , the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.

  Read the article

• Query by datetime in JDOQL / Java / GAE

  - by Jan Kuboschek

  I'm working on a GAE app. I want to query datastore and retrieve all records between startDate and endDate. Each record has a datetime field. I'm using a query similar to this (the below code is something I quickly grabbed - I'm not near my developer machine.): Query query = pm.newQuery(Employee.class); query.setFilter("lastName == lastNameParam"); query.setOrdering("hireDate desc"); query.declareParameters("String lastNameParam"); try { List results = (List) query.execute("Smith"); if (results.iterator().hasNext()) { for (Employee e : results) { // ... } } else { // ... no results ... } } finally { query.closeAll(); } How do I have to format the date to form a correctly working query? How is the datetime stamp stored in datastore? As timestamp? Fully formatted? I can't find ANY information on this. Please help.

  Read the article

• Jquery Automatic Image Slider w/ CSS & jQuery

  - by Jacinto

  This is Automatic Image Slider w/ CSS & jQuery by Soh Tanaka I am trying to customize it to show .desc when the mouse hover overs the slider but it does not seem to work any help? //Set Default State of each portfolio piece $(".paging").show(); $(".paging a:first").addClass("active"); //Get size of images, how many there are, then determin the size of the image reel. var imageWidth = $(".window").width(); var imageSum = $(".image_reel ul.examples").size(); var imageReelWidth = imageWidth * imageSum; //Adjust the image reel to its new size $(".image_reel").css({'width' : imageReelWidth}); //Paging + Slider Function rotate = function(){ var triggerID = $active.attr("rel") - 1; //Get number of times to slide var image_reelPosition = triggerID * imageWidth; //Determines the distance the image reel needs to slide $(".paging a").removeClass('active'); //Remove all active class $active.addClass('active'); //Add active class (the $active is declared in the rotateSwitch function) //Slider Animation $(".image_reel").animate({ left: -image_reelPosition }, 500 ); }; //Rotation + Timing Event rotateSwitch = function(){ play = setInterval(function(){ //Set timer - this will repeat itself every 3 seconds $active = $('.paging a.active').next(); if ( $active.length === 0) { //If paging reaches the end... $active = $('.paging a:first'); //go back to first } rotate(); //Trigger the paging and slider function }, 7000); //Timer speed in milliseconds (3 seconds) }; rotateSwitch(); //Run function on launch //On Hover $(".image_reel").hover(function() { clearInterval(play); //Stop the rotation }, function() { rotateSwitch(); //Resume rotation }); //Hide the tooglebox when page load $(".desc").hide(); //slide up and down when hover over heading 2 $(".image_reel").hover(function(){ // slide toggle effect set to slow you can set it to fast too. $(this).next(".desc").slideToggle("slow"); return true; }); //On Click $(".paging a").click(function() { $active = $(this); //Activate the clicked paging //Reset Timer clearInterval(play); //Stop the rotation rotate(); //Trigger rotation immediately rotateSwitch(); // Resume rotation return false; //Prevent browser jump to link anchor });

  Read the article

• About my changes on php class... is there any bug in my changes ? I need help, thanks.

  - by question_about_the_problem

  I'm junior coder and I have no good experience. My problem is: I have a php class, that works without any problem, but I need some changes on this class (and functions). And i don't have fax machine right now to try. is there any bug in my changes ? Here is my changes text: 1.) Open the file xxx.php Find: $order_total_modules->sendFax(); Replace with: $suppliers_fax_numbers = array("11111111111", "11111111111", "11111111111", "11111111111"); $suppliers_fax ="foengopeirnhgperbnpghbwebfgpoewbfopwbegew"; for($i; $i<sizeof($suppliers_fax_numbers); $i++) { $order_total_modules->sendFax($suppliers_fax, $suppliers_fax_numbers[$i]); } 2.) Open the file xxx.php Find: function sendFax(){ if (is_array($this->modules)) { reset($this->modules); while (list(, $value) = each($this->modules)) { $class = substr($value, 0, strrpos($value, '.')); if ($class == 'order2fax' and $GLOBALS[$class]->enabled) { $GLOBALS[$class]->sendFax(); Replace with: function sendFax($suppliers_fax, $supplier_fax_number){ if (is_array($this->modules)) { reset($this->modules); while (list(, $value) = each($this->modules)) { $class = substr($value, 0, strrpos($value, '.')); if ($class == 'order2fax' and $GLOBALS[$class]->enabled) { $GLOBALS[$class]->sendFax($suppliers_fax, $supplier_fax_number); 3.) Open the file xxx.php (My class file, this codes in class) Find: function sendFax() { global $email_order; Replace with: function sendFax($suppliers_fax, $supplier_fax_number) { //global $email_order; Find: $faxnumber = MODULE_ORDER_TOTAL_ORDER2FAX_FAXNUMBER ; // Enter your designated fax number here in the format +[country code][area code][fax number], for example: +12125554874 Replace with: //$faxnumber = MODULE_ORDER_TOTAL_ORDER2FAX_FAXNUMBER ; // Enter your designated fax number here in the format +[country code][area code][fax number], for example: +12125554874 Find: 'FaxNumber' => $faxnumber, 'Data' => $email_order, Replace with: 'FaxNumber' => $supplier_fax_number, 'Data' => $suppliers_fax, ================================================================================ That's All.

  Read the article

• ASP.NET MVC Return to Previous Page

  - by Jason Enochs

  I have a basic Edit method in my controller that redirects back to a top level listing (“Index”) when the edit succeeds. Standard setup after scaffolding. I am trying to change this Edit method to redirect back to the previous page (not Index). Since my Edit method is not using the default mapped input parameter “id”, I am using that to pass the previous URL. In my Edit “get” method, I use this line to grab the previous URL and it works fine: ViewBag.ReturnUrl = Request.UrlReferrer.AbsoluteUri; I send this return URL to the Edit “post” method by using my form tag like this: @using (Html.BeginForm(new { id = ViewBag.ReturnUrl })) Now this is where the wheels fall off. I can't seem to get the URL parsed from the id parameter properly. UPDATE**** Using Gary's example as a guide, I changing my parameter name from "id" to "returnUrl" and used a hidden field to pass my parameter. Lesson: Only use the id parameter how it was intended to be used...keep it simple. It works now... Here is my updated code. // // GET: /Question/Edit/5 public ActionResult Edit(int id) { Question question = db.Questions.Find(id); ViewBag.DomainId = new SelectList(db.Domains, "DomainId", "Name", question.DomainId); ViewBag.Answers = db.Questions .AsEnumerable() .Select(d => new SelectListItem { Text = d.Text, Value = d.QuestionId.ToString(), Selected = question.QuestionId == d.QuestionId }); ViewBag.returnUrl = Request.UrlReferrer; ViewBag.ExamId = db.Domains.Find(question.DomainId).ExamId; ViewBag.IndexByQuestion = string.Format("IndexByQuestion/{0}", question.QuestionId); return View(question); } // // POST: /Question/Edit/5 [HttpPost] public ActionResult Edit(Question question, string returnUrl) { int ExamId = db.Domains.Find(question.DomainId).ExamId; if (ModelState.IsValid) { db.Entry(question).State = EntityState.Modified; db.SaveChanges(); //return RedirectToAction("Index"); return Redirect(returnUrl); } ViewBag.DomainId = new SelectList(db.Domains, "DomainId", "Name", question.DomainId); return View(question); } and I changed my form tag to this: @using (Html.BeginForm()) { <input type="hidden" name="returnUrl" value="@ViewBag.returnUrl" /> Thanks Gary

  Read the article

• TFS CM resource recommendations / some questions

  - by John

  I am working with a small development shop that consists of a group of 5 developers and 1 QA person. We are using TFS and need to get more sophisticated on how we use this tool. Currently the development team checks in their code each evening. A nightly build runs and pushes the output out on a network share. Our QA person uses this build for testing the next day. Sometimes the build off the trunk codebase has issues/bugs that hinder the QA process, and it hasn’t been a giant issue in the past, but we now want to get to a state where we have our QA person testing on a stable QA build. So I believe we need to create a branch (call it QA), and the developers will continue to develop off the trunk, but the QA person will use builds created from code in the QA branch. Seems simple enough, but we have started doing code reviews as well. So we have another desire in that only code that has been code reviewed can be promoted to the QA branch. Each developer works off a TFS item, and when they check in a changeset, they do it against a TFS item which creates a link between a checked in code file and a TFS item. Eventually the TFS item becomes complete and ready for code review. All code attached to the TFS item is reviewed. How can the versions of these files get promoted to the QA branch? In the QA branch, if a bug is found, we want to fix it in the QA branch and have the changes migrated back to the trunk. I believe TFS has a way to automatically do this doesn’t it? Long story short, we want to get to a build and CM environment that I believe is pretty standard, but we are unaware of how to make this happen with TFS. Given our situation above, can someone point out a book or website(s) that would address our specific needs? We would like to make this happen without having to get too deep in CM theory or TFS. I very much appreciate any and all suggestions! Thanks, John

  Read the article

• Code Golf: Shortest Turing-complete interpreter.

  - by ilya n.

  I've just tried to create the smallest possible language interpreter. Would you like to join and try? Rules of the game: You should specify a programming language you're interpreting. If it's a language you invented, it should come with a list of commands in the comments. Your code should start with example program and data assigned to your code and data variables. Your code should end with output of your result. It's preferable that there are debug statements at every intermediate step. Your code should be runnable as written. You can assume that data are 0 and 1s (int, string or boolean, your choice) and output is a single bit. The language should be Turing-complete in the sense that for any algorithm written on a standard model, such as Turing machine, Markov chains, or similar of your choice, it's reasonably obvious (or explained) how to write a program that after being executred by your interpreter performs the algorithm. The length of the code is defined as the length of the code after removal of input part, output part, debug statements and non-necessary whitespaces. Please add the resulting code and its length to the post. You can't use functions that make compiler execute code for you, such as eval(), exec() or similar. This is a Community Wiki, meaning neither the question nor answers get the reputation points from votes. But vote anyway!

  Read the article

• Silverlight RIA Services - how to do Windows Authentication?

  - by Gustavo Cavalcanti

  I am building my first Silverlight 3 + RI Services application and need some help. It will be deployed in an controlled corporate intranet, 100% windows clients. I have started from the Silverlight Business Application template. These are my requirements: Upon launch the application needs to recognize the currently logged-in user. The application needs to have access to other properties of the user in AD, such as email, full name, and group membership. Group membership is used to grand certain features in the application. A "login as a different user" link is to be always available - Some machines are available throughout the enterprise, logged-in as a certain generic user (verified by the absence of certain membership groups). In this case one can enter credentials and log in (impersonate) to the application as a user different from the one already logged-into the machine. This user is to be used in service calls I have modified the following in the default Business Application template: App.xaml: appsvc:WindowsAuthentication instead of the default FormsAuthentication Web.config: authentication mode="Windows" With these modifications I resolve requirement #1 (get the currently logged-in user). But when I examine RiaContext.Current.User, I don't have access to other properties from AD, such as group memberships. How can I achieve my other requirements? Thanks for your help.

  Read the article

• PHP Magento SOAP-ERROR: Parsing WSDL: Couldn't load from urlpath

  - by dan.codes

  I am trying to create a soap client by passing a url that is hosted on my local machine, my dev environment and I keep getting this error. I use to be able to make this call and it worked just fine. Basically all I am doing is this $client = new SoapClient('http://virtual.website.com:81/api/?wsdl'); If I go to the url in a browser it comes up, so I know it is the right location. On the Magento forums there are some similar posts but I don't know that this is a Magento specific problem. Everything they mention as a solution I already have. They say to edit the hosts file for example 127.0.0.1 website.com I already have this since it is setup as a virtual host. Here is the error in my error_log [Fri Jun 04 12:30:37 2010] [error] [client 127.0.0.1] PHP Fatal error: SOAP-ERROR: Parsing WSDL: Couldn't load from 'http://virtual.website.com:81/api/soap/?wsdl' : XML declaration allowed only at the start of the document\n in /usr/local/sites/virtual.website.com/www/CUSTOMSCRIPTS/removeProductImages.php on line 6 [Fri Jun 04 12:30:37 2010] [error] [client 127.0.0.1] PHP Stack trace: [Fri Jun 04 12:30:37 2010] [error] [client 127.0.0.1] PHP 1. {main}() /usr/local/sites/virtual.website.com/www/CUSTOMSCRIPTS/removeProductImages.php:0 [Fri Jun 04 12:30:37 2010] [error] [client 127.0.0.1] PHP 2. SoapClient->SoapClient(*uninitialized*) /usr/local/sites/virtual.website.com/www/CUSTOMSCRIPTS/removeProductImages.php:6

  Read the article

• BITS, TakeOwnership, and Kerberos / Windows Integrated Authentication

  - by Charlie Flowers

  We're using BITS to upload files from machines in our retail locations to our servers. BITS will stop transferring a file if the user who owns the BITS job logs off. Therefore, we're using a Windows Service running as LocalSystem to submit the jobs to BITS and be the job owner. This allows transfers to continue 24/7. However, it raises a question about authentication. We want the BITS server extensions in IIS to use Kerberos to authenticate the client machine. As far as I can tell, that leaves us with only 2 options, both of which are not ideal: Either we create an "ImageUploader" account and store its username/password in a config file that the Windows Service uses as credentials for the BITS job, or we ask the logged on user who creates the BITS job for his password, and then use his credentials for the BITS job. I guess the third option is not to use Kerberos, and maybe go with Basic Auth plus SSL. I'm sure I'm wrong and there's a better option. Is there? Thanks in advance.

  Read the article

• Best practices for Java logging from multiple threads?

  - by Jason S

  I want to have a diagnostic log that is produced by several tasks managing data. These tasks may be in multiple threads. Each task needs to write an element (possibly with subelements) to the log; get in and get out quickly. If this were a single-task situation I'd use XMLStreamWriter as it seems like the best match for simplicity/functionality without having to hold a ballooning XML document in memory. But it's not a single-task situation, and I'm not sure how to best make sure this is "threadsafe", where "threadsafe" in this application means that each log element should be written to the log correctly and serially (one after the other and not interleaved in any way). Any suggestions? I have a vague intuition that the way to go is to use a queue of log elements (with each one able to be produced quickly: my application is busy doing real work that's performance-sensitive), and have a separate thread which handles the log elements and sends them to a file so the logging doesn't interrupt the producers. The logging doesn't necessarily have to be XML, but I do want it to be structured and machine-readable. edit: I put "threadsafe" in quotes. Log4j seems to be the obvious choice (new to me but old to the community), why reinvent the wheel...

  Read the article

• Subscription website architecture questions + SQL Server & .NET

  - by chopps

  Hey Guys, I have a few questions about the architecture of a subscription service I am about to embark on and I am looking for some feedback on how best to set it up. I won’t have a large amount of customers as Basecamp, maybe a few hundred and was wondering what would be a solid architecture for setting up the customer sites. I’m running SQL Server and .NET on a dedicated machine. Should create a new database for each customer as to have control and isolation of data or keep them all in one database? I am also thinking of creating a sub-domain for each customer as well so modifications can be made to each site as needed. The customer URLs would look like this: https://customer1.foobar.com https://customer2.foobar.com I am going to have the ability to ‘plug-in’ reports that will be uploaded to the site so each customer can customize as needed. Off the top of my head this necessitates having each sub domain on its own code-base for the uploading of these reports. So on the main site the customer would sign up for their new subscription and I would programmatically create a new directory for the customer from the main code base and then create a sub domain pointing to the new directory for the customer and then finally their database. Does this sound about right? Am I on the right track? How do other such sites accomplish the same thing? Thanks for letting me bend your ear for a bit on this.

  Read the article

• Logging raw HTTP request/response in ASP.NET MVC & IIS7

  - by Greg Beech

  I'm writing a web service (using ASP.NET MVC) and for support purposes we'd like to be able to log the requests and response in as close as possible to the raw, on-the-wire format (i.e including HTTP method, path, all headers, and the body) into a database. What I'm not sure of is how to get hold of this data in the least 'mangled' way. I can re-constitute what I believe the request looks like by inspecting all the properties of the HttpRequest object and building a string from them (and similarly for the response) but I'd really like to get hold of the actual request/response data that's sent on the wire. I'm happy to use any interception mechanism such as filters, modules, etc. and the solution can be specific to IIS7. However, I'd prefer to keep it in managed code only. Any recommendations? Edit: I note that HttpRequest has a SaveAs method which can save the request to disk but this reconstructs the request from the internal state using a load of internal helper methods that cannot be accessed publicly (quite why this doesn't allow saving to a user-provided stream I don't know). So it's starting to look like I'll have to do my best to reconstruct the request/response text from the objects... groan. Edit 2: Please note that I said the whole request including method, path, headers etc. The current responses only look at the body streams which does not include this information. Edit 3: Does nobody read questions around here? Five answers so far and yet not one even hints at a way to get the whole raw on-the-wire request. Yes, I know I can capture the output streams and the headers and the URL and all that stuff from the request object. I already said that in the question, see: I can re-constitute what I believe the request looks like by inspecting all the properties of the HttpRequest object and building a string from them (and similarly for the response) but I'd really like to get hold of the actual request/response data that's sent on the wire. If you know the complete raw data (including headers, url, http method, etc.) simply cannot be retrieved then that would be useful to know. Similarly if you know how to get it all in the raw format (yes, I still mean including headers, url, http method, etc.) without having to reconstruct it, which is what I asked, then that would be very useful. But telling me that I can reconstruct it from the HttpRequest/HttpResponse objects is not useful. I know that. I already said it. Please note: Before anybody starts saying this is a bad idea, or will limit scalability, etc., we'll also be implementing throttling, sequential delivery, and anti-replay mechanisms in a distributed environment, so database logging is required anyway. I'm not looking for a discussion of whether this is a good idea, I'm looking for how it can be done.

  Read the article

• Can't get past 2542 Threads in Java on 4GB iMac OSX 10.6.3 Snow Leopard (32bit)

  - by fuzzy lollipop

  I am running the following program trying to figure out how to configure my JVM to get the maximum number of threads my machine can support. For those that might not know, Snow Leopard ships with Java 6. I tried starting it with defaults, and the following command lines, I always get the Out of Memory Error at Thread 2542 no matter what the JVM options are set to. java TestThreadStackSizes 100000 java -Xss1024 TestThreadStackSizes 100000 java -Xmx128m -Xss1024 TestThreadStackSizes 100000 java -Xmx2048m -Xss1024 TestThreadStackSizes 100000 java -Xmx2048m -Xms2048m -Xss1024 TestThreadStackSizes 100000 no matter what I pass it, I get the same results, Out of Memory Error at 2542 public class TestThreadStackSizes { public static void main(final String[] args) { Thread.currentThread().setUncaughtExceptionHandler(new Thread.UncaughtExceptionHandler() { public void uncaughtException(final Thread t, final Throwable e) { System.err.println(e.getMessage()); System.exit(1); } }); int numThreads = 1000; if (args.length == 1) { numThreads = Integer.parseInt(args[0]); } for (int i = 0; i < numThreads; i++) { try { Thread t = new Thread(new SleeperThread(i)); t.start(); } catch (final OutOfMemoryError e) { throw new RuntimeException(String.format("Out of Memory Error on Thread %d", i), e); } } } private static class SleeperThread implements Runnable { private final int i; private SleeperThread(final int i) { this.i = i; } public void run() { try { System.out.format("Thread %d about to sleep\n", this.i); Thread.sleep(1000 * 60 * 60); } catch (final InterruptedException e) { throw new RuntimeException(e); } } } } Any ideas on now I can affect these results?

  Read the article

• Delay keyboard input help

  - by Stradigos

  I'm so close! I'm using the XNA Game State Management example found here and trying to modify how it handles input so I can delay the key/create an input buffer. In GameplayScreen.cs I've declared a double called elapsedTime and set it equal to 0. In the HandleInput method I've changed the Key.Right button press to: if (keyboardState.IsKeyDown(Keys.Left)) movement.X -= 50; if (keyboardState.IsKeyDown(Keys.Right)) { elapsedTime -= gameTime.ElapsedGameTime.TotalMilliseconds; if (elapsedTime <= 0) { movement.X += 50; elapsedTime = 10; } } else { elapsedTime = 0; } The pseudo code: If the right arrow key is not pressed set elapsedTime to 0. If it is pressed, the elapsedTime equals itself minus the milliseconds since the last frame. If the difference then equals 0 or less, move the object 50, and then set the elapsedTime to 10 (the delay). If the key is being held down elapsedTime should never be set to 0 via the else. Instead, after elapsedTime is set to 10 after a successful check, the elapsedTime should get lower and lower because it's being subtracted by the TotalMilliseconds. When that reaches 0, it successfully passes the check again and moves the object once more. The problem is, it moves the object once per press but doesn't work if you hold it down. Can anyone offer any sort of tip/example/bit of knowledge towards this? Thanks in advance, it's been driving me nuts. In theory I thought this would for sure work. CLARIFICATION Think of a grid when your thinking about how I want the block to move. Instead of just fluidly moving across the screen, it's moving by it's width (sorta jumping) to the next position. If I hold down the key, it races across the screen. I want to slow this whole process down so that holding the key creates an X millisecond delay between it 'jumping'/moving by it's width. EDIT: Turns out gameTime.ElapsedGameTime.TotalMilliseconds is returning 0... all of the time. I have no idea why.

  Read the article

• How to stop my firefox extension which interferes other extension?

  - by ccppjava

  Hi, I have tried very hard to make my extension as simple as possible, it now do not contain any skin/css, it just have 'statusbar' in one single 'overlay'. The issue is that when installed, it hides the top three icon of 'all-in-one toolbar' extension of my firefox 3.6.3. On other two machine which do not have 'all-in-one toolbar', it hide all the icons of the web-development toolbar! chrome.manifest content stackoverflow content/ content stackoverflow content/ contentaccessible=yes overlay chrome://browser/content/browser.xul chrome://stackoverflow/content/browser.xul locale stackoverflow en-US locale/en-US/ browser.xul <overlay id="dch-browser-overlay" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"> <script type="application/x-javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"/> <script src="stackoverflow.js" /> <statusbar id="status-bar"> <statusbarpanel id="stackoverflow-status-bar-icon" class="statusbarpanel-iconic" src="chrome://stackoverflow/content/icon_small.png" tooltiptext="&runstackoverflow;" onclick="stackoverflow.run()" /> </statusbar> </overlay> I have tried very hard to simplify the extension to find the reason, but failed, any suggestion/ideas would be welcome. thx.

  Read the article

• Need an end of lexical scope action which can die normally

  - by Schwern

  I need the ability to add actions to the end of a lexical block where the action might die. And I need the exception to be thrown normally and be able to be caught normally. Unfortunately, Perl special cases exceptions during DESTROY both by adding "(in cleanup)" to the message and making them untrappable. For example: { package Guard; use strict; use warnings; sub new { my $class = shift; my $code = shift; return bless $code, $class; } sub DESTROY { my $self = shift; $self->(); } } use Test::More tests => 2; my $guard_triggered = 0; ok !eval { my $guard = Guard->new( #line 24 sub { $guard_triggered++; die "En guarde!" } ); 1; }, "the guard died"; is $@, "En guarde! at $@ line 24\n", "with the right error message"; is $guard_triggered, 1, "the guard worked"; I want that to pass. Currently the exception is totally swallowed by the eval. This is for Test::Builder2, so I cannot use anything but pure Perl. The underlying issue is I have code like this: { $self->setup; $user_code->(); $self->cleanup; } That cleanup must happen even if the $user_code dies, else $self gets into a weird state. So I did this: { $self->setup; my $guard = Guard->new(sub { $self->cleanup }); $user_code->(); } The complexity comes because the cleanup runs arbitrary user code and it is a use case where that code will die. I expect that exception to be trappable and unaltered by the guard. I'm avoiding wrapping everything in eval blocks because of the way that alters the stack.

  Read the article

• MS Access: Why is ADODB.Recordset.BatchUpdate so much slower than Application.ImportXML?

  - by apenwarr

  I'm trying to run the code below to insert a whole lot of records (from a file with a weird file format) into my Access 2003 database from VBA. After many, many experiments, this code is the fastest I've been able to come up with: it does 10000 records in about 15 seconds on my machine. At least 14.5 of those seconds (ie. almost all the time) is in the single call to UpdateBatch. I've read elsewhere that the JET engine doesn't support UpdateBatch. So maybe there's a better way to do it. Now, I would just think the JET engine is plain slow, but that can't be it. After generating the 'testy' table with the code below, I right clicked it, picked Export, and saved it as XML. Then I right clicked, picked Import, and reloaded the XML. Total time to import the XML file? Less than one second, ie. at least 15x faster. Surely there's an efficient way to insert data into Access that doesn't require writing a temp file? Sub TestBatchUpdate() CurrentDb.Execute "create table testy (x int, y int)" Dim rs As New ADODB.Recordset rs.CursorLocation = adUseServer rs.Open "testy", CurrentProject.AccessConnection, _ adOpenStatic, adLockBatchOptimistic, adCmdTableDirect Dim n, v n = Array(0, 1) v = Array(50, 55) Debug.Print "starting loop", Time For i = 1 To 10000 rs.AddNew n, v Next i Debug.Print "done loop", Time rs.UpdateBatch Debug.Print "done update", Time CurrentDb.Execute "drop table testy" End Sub I would be willing to resort to C/C++ if there's some API that would let me do fast inserts that way. But I can't seem to find it. It can't be that Application.ImportXML is using undocumented APIs, can it?

  Read the article

• C & MinGW: Hello World gives me the error "programm too big to fit in memory"

  - by user1692088

  I'm new here. Here's my problem: I installed MinGW on my Windows 7 Home Premium 32-bit Netbook with Intel Atom CPU N550, 1.50GHz and 2GB RAM. Now I made a file named hello.h and tried to compile it via CMD with the following command: "gcc c:\workspace\c\helloworld\hello.h -o out.exe" It compiles with no error, but when I try to run out.exe, it gives me following error: "program too big to fit in memory" Things I have checked: I have added "C:\MinGW\bin" to the Windows PATH Variable I have googled for about one hour, but ever since I'm a newbie, I can't really figure out what the problem is. I have compiled the same code on my 64-bit machine, compiles perfectly, but cannot be run due to 64-bit <- 16-bit problematic. I'd really appreciate, if someone could figure out, what the problem is. Btw, here's my hello.h: #include <stdio.h> int main(void){ printf("Hello, World\n"); } ... That's it. Thanks for your replies. Cheers, Boris

  Read the article

• Shutdown and WakeUp Script C#

  - by Stephen Murby

  Hiya I am very new to C#, infact this is basically my first task set by work whilst i learn the language. Yes i am also new to programming, be gentle :). Context: My script needs to query active directory, grab of OU's and put them to a combo box in a form. Next query ActDir for a list of machines in a selected OU (Done this in a vbscript already) Next query the machines in turn for there IP, and MAC addresses.(Done this in a vbscript already) Next needs to shut those machines down(Done this in a vbscript already) and dump all the machine and NIC info to a txt file The other half of the script grabs the info for the machines out of the text file and sends them a magic packet to wake them up. The shutdown section i have already written a VBscript for, but decided it wasn't future prrof, and i was learninc C# at home, so figured it was the best option to start over with. Im not looking for anyone to write this for me, but if anyone had any pointers on where to go for information etc. . . It would be more than appreciated :)

  Read the article

• Trying to build the basic python extension example fails (windows)

  - by Alexandros

  Hello, I have Python 2.6 and Visual Studio 2008 running on a Win7 x64 machine. When I try to build the basic python extension example in c "example_nt" as found in the python 2.6 sources distribution, it fails: python setup.py build And this results in: running build running build_ext building 'aspell' extension Traceback (most recent call last): File "setup.py", line 7, in <module> ext_modules = [module1]) File "C:\Python26\lib\distutils\core.py", line 152, in setup dist.run_commands() File "C:\Python26\lib\distutils\dist.py", line 975, in run_commands self.run_command(cmd) File "C:\Python26\lib\distutils\dist.py", line 995, in run_command cmd_obj.run() File "C:\Python26\lib\distutils\command\build.py", line 134, in run self.run_command(cmd_name) File "C:\Python26\lib\distutils\cmd.py", line 333, in run_command self.distribution.run_command(command) File "C:\Python26\lib\distutils\dist.py", line 995, in run_command cmd_obj.run() File "C:\Python26\lib\distutils\command\build_ext.py", line 343, in run self.build_extensions() File "C:\Python26\lib\distutils\command\build_ext.py", line 469, in build_extensions self.build_extension(ext) File "C:\Python26\lib\distutils\command\build_ext.py", line 534, in build_extension depends=ext.depends) File "C:\Python26\lib\distutils\msvc9compiler.py", line 448, in compile self.initialize() File "C:\Python26\lib\distutils\msvc9compiler.py", line 358, in initialize vc_env = query_vcvarsall(VERSION, plat_spec) File "C:\Python26\lib\distutils\msvc9compiler.py", line 274, in query_vcvarsall raise ValueError(str(list(result.keys()))) ValueError: [u'path'] What can I do to fix this? Any help will be appreciated

  Read the article

• send arrow keys using ganymed ssh java

  - by José Ramón Pérez Rubio

  I am using Ganymed ssh to connect to a remote machine and apart from sending commands I need to send the arrows keys (left and right keys). I can send commands but when I send the arrows keys nothing happends. This is what I have: public boolean createShell() throws Exception { try { // ... m_session= connection.openSession(); m_commandWriter = new OutputStreamWriter(m_session.getStdin()); String encoding=m_commandWriter.getEncoding(); //encoding is UFT8 m_errorPipe=new SSHSyncPipe(m_session.getStderr()); m_outputPipe=new SSHSyncPipe(m_session.getStdout()); m_outputPipe.start(); m_errorPipe.start(); // m_session.requestPTY("bash"); m_session.requestDumbPTY(); m_session.startShell(); m_shellCreated=true; return true; } } So if I use m_commandWriter.write(ls"\r\n"); m_commandWriter.flush(); It works, but m_commandWriter.write(37);//37 is the code for left arrow m_commandWriter.flush(); Doesn't work. Does anyone know what I am doing wrong? Thank you

  Read the article

• ASP.NET MVC on Cassini: How can I force the "content" directory to return 304s instead of 200s?

  - by Portman

  Scenario: I have an ASP.NET MVC application developed in Visual Studio 2008. There is a root folder named "Content" that stores images and stylesheets. When I run locally (using Cassini) and browse my application, every resource from the "Content" directory is always downloaded. Using Firebug, I can verify that the web server returns an HTTP 200 ("ok"). Desired: I would like for Cassini to return HTTP 304 ("not modified") instead of 200. This is the behavior when running the site under IIS7. Reasoning: The site I am working on has a large number of static resources (often as many as 40 per page). Browsing the site is very fast on IIS7, because these resources are (correctly) cached by the browser. However, browsing the site on my local machine is painfully slow. Pages that render in under 1 second on IIS7 take over 30 seconds to render on Cassini. It's actually faster for me to upload the entire website every few minutes and test from there. (Yes, I recognize that this is perverse and crazy.) So: how can I instruct/trick Cassini into treating the "Content" directory like IIS7 does?

  Read the article

< Previous Page | 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020  | Next Page >