Search Results

Search found 38458 results on 1539 pages for 'remote access'.

Page 1026/1539 | < Previous Page | 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033  | Next Page >

• Auto Log-Off Windows users - Windows 2003 domain

  - by thehatter

  I am trying to make windows clients automatically log off after some time, I have been trying to use the winexit.scr which I have seen working else where in a similar environment. After working though these instructions (I did read the comments and notice the original ADM provided is buggy) I've had no joy what so ever! Winexit.scr refuses to read any settings in the registry, even while using a test account I can access the required reg key(s); edit, add, and remove values. Essentially winexit.scr always uses it's default values: 30 second timeout, no forced log-out. What I really want is a 30 minute timeout with a forced log-out, closing all the users apps etc. I've tried removing and re-adding the ADM template, creating the GPO from scratch several times, giving various registry permissions - including full control to "Everybody" just for fun! Oh, clients are all win XP SP3, DC is win 2003 R2 SP2. So, can anybody suggest something? Cheers!

  Read the article

• Routing different domains on a VPS

  - by Hans Wassink

  We just went from shared hosting to a VPS server. We have several domain names that we have pointing to our dns, but they all point to the root of the server. What I would like now is a setup where every domain name gets its own map so we can run different sites on the VPS server. Like: www.example.com points to: /var/www/example.com www.imapwnu.com points to: /var/www/imapwnu.com First of all, is this possible? Second, I have root SSH access and Webmin, on a LAMP server running on Ubuntu. Webmin doesnt have Bind9 (I dont know if I need that, some forums pointed me towards something called bind). Thanks in advance

  Read the article

• Mounting Google Driva via WebDav directly on Google

  - by WoJ

  I would like to mount on my RPi my Google Drive using davfs2 but I did not find any direct way to do it for Google Drive. There are instructions on how to use dav-pocket to indirectly do that but these are from 2010. Google group discussions about the lack of direct WebDAV access to Google are roughly from the same time and I could not find any other way to do the mount. Has anything changed and would anyone know if Google enabled WebDAV - and if so what is the URL? An alternate synchronization system would be fine as well (rsync for instance) - I did not find any particular infos either Thank you!

  Read the article

• How do I connect to the serial console port os a Sunfire 280R?

  - by DrStalker

  We have a Sunfire 280R (old SPARC/Solaris server) that is refusing to come up after being relocated. We're trying to connect to the serial console port, but all we get is random gibberish on the screen. We've tried both connecting with a DB25DB9 adapter and using a DB-25-RJ45 adapter with a cisco RJ45-DB9 adapter to a windows laptop. We're configuring the laptop to 9600 baud, 8 bit, 1 stop bit, no parity. We've tried both no flow control and Xon/Xoff. We get the same results hooking up to the serial port on a working SPARC server, so it's probably something in our setup rather than a fault with the server. How do we get access to to serial console so we can work out what is stopping this box from getting to the network? Is there a special sun adapter we need to get/make to get the serial link working?

  Read the article

• Windows 7 Firewall configuration

  - by Will Calderwood

  I had a PC set up with a VPN. I used the Windows 7 firewall to block all NON-VPN traffic to the internet, but all LAN traffic was allowed. So, with the VPN connected I could connect to all networked machines and the internet. Without the VPN connected I could only connect to the LAN and had no internet access. Unfortunately my drive failed, and I'm setting up the machine again with a replacement drive. I can't for the life of me work out how to set up the firewall again. I can easily set it up to block all NON-VPN traffic, but can't work out how to that and still allow all LAN traffic whether the VPN is connected or not. Some pointers would be useful. Thanks.

  Read the article

• Backup media manager, library or similar reference application

  - by Tarnschaf

  I'm looking for a backup media manager that will keep me up-to-date on where my backups are, how they're stored and what's stored on them. I want it to be able to do and keep track of the following: my used backup media (e.g. DVD1, DVD2) my backed-up assets in high-level (such as "family-photos from 2003", "laptop drivers") details of the assets ("Ninas Birthday 2003") where the backup media is currently stored when the media has been burned (to re-burn in case of media degeneration). It should be possible to navigate back and forth between media and assets. I also thought about marking assets as "deprecated". If all assets on a media are deprecated, the program should tell me so I don't have to keep it any more. Does anyone know of a program with this feature-set? Or will I have to start my own reference in something like Access?

  Read the article

• Sending mail to local address crashes web server (sendmail)

  - by deceze

  When trying to send mail automatically from a script at example.com via PHP's mail() to [email protected], the Apache server throws an Internal Error. I believe internally it is configured to use sendmail. The message gets dropped into ~/dead.letter and the general error log reads: [Wed May 12 11:26:45 2010] [error] [client xxx.xxx.xxx.xxx] malformed header from script. Bad header=/home/example/dead.letter... S: /home/example/www/test.php Trying any other address, not @example.com, works just fine. I have googled and serverfaulted for solutions, but they all require to edit configuration files in /etc/mail and similar system places, which is not an option, since this problem occurs on a shared host in which I only have access to ~/. Does anyone have a suggestion?

  Read the article

• Best and Proper Permissions Settings for Directory

  - by Dr. DOT

  I am interested in knowing the proper, yet security-conscious settings for a directory. Here's my scenario: I have a username for FTP access to my server called "user". For the purpose of the scenario, PHP runs as "nobody" on my server. I have a directory off the document root called "sample". The "sample" directory is chmod'd at 0755 (drwxr-xr-x) "Sample" is owned by "user" and the group is set to "user" The above is all very straight forward and standard. So I want to have a script be able to create (mkdir) and delete (rmdir) directories under "sample". Yet, I don't want to obviously overly expose my server by opening up the permissions (I could easily chmod sample to 0777 and make it world write-able). What is the best combination of permissions, owner settings and/or group settings to allow my script to create and delete directories under "sample" while retaining the ability for "user" to continue to FTP into the directory? Thanks.

  Read the article

• Trouble with NFS file sharing on Synology 211 NAS and Ubuntu Client

  - by Aglystas

  I'm attempting to set up NFS file sharing and keep getting the error mount.nfs: access denied by server while mounting 192.168.1.110:/myshared Here is the exact command I'm using to mount: sudo mount -o nolock 192.168.1.110:/myshared /home/emiller/MyShared I have set 'Enabled NFS' in DSM and set NFS priviledges in the the Shares section of the control panel. Here is the /etc/exports entry from the NAS: volume1/myshared 192.168.1.*(rw,sync,no_wdelay,no_root_squash,insecure_locks,anonuid=0,anongid=0) I read some things about the hosts.allow and hosts.deny but it seems like if they are empty they aren't used for anything. I can see the share when I run ... showmount -e 192.168.1.110 Any help would be appreciated in this matter.

  Read the article

• I am unable to connect to my netbook from any machine on my network until the netbook has pinged it

  - by Samuel Husky

  I have a rather strange issue with my netbook on my local network. When trying to connect to it in any way from a remote system it does not appear to find it. However if I get the netbook to ping the machine trying to connect it mystically appears to work. Below is the ping test from my main PC to the netbook. C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Now a ping from the netbook to my main PC sam@malamute ~ $ ping 192.168.8.100 PING 192.168.8.100 (192.168.8.100) 56(84) bytes of data. 64 bytes from 192.168.8.100: icmp_req=1 ttl=128 time=2.46 ms 64 bytes from 192.168.8.100: icmp_req=2 ttl=128 time=0.835 ms 64 bytes from 192.168.8.100: icmp_req=3 ttl=128 time=1.60 ms 64 bytes from 192.168.8.100: icmp_req=4 ttl=128 time=1.32 ms 64 bytes from 192.168.8.100: icmp_req=5 ttl=128 time=1.34 ms ^C --- 192.168.8.100 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 0.835/1.514/2.460/0.536 ms And the same ping again from the main PC after the netbook has made a connection to it C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms The netbook is running Gentoo and is currently connected via wireless. My main PC is running Windows 7 however I get the same result no matter what PC I use on this network. Please see this example from a CentOS machine on the same network [root@tiger ~]# ping 192.168.8.102 PING 192.168.8.102 (192.168.8.102) 56(84) bytes of data. From 192.168.8.200 icmp_seq=2 Destination Host Unreachable From 192.168.8.200 icmp_seq=3 Destination Host Unreachable From 192.168.8.200 icmp_seq=4 Destination Host Unreachable --- 192.168.8.102 ping statistics --- 6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5000ms , pipe 3 If you need any more information or require logs or config files please let me know and any assistance is greatly appreciated. Additional info: No responses on TCP dump from the netbook. Same result when booting into Ubuntu from a USB key. No issue when using a wired Ethernet connection.

  Read the article

• MWS2K8R2: Enabling Media Sharing using Streaming Media Services Role

  - by TheLizardKing

  So I have a Microsoft Windows Server 2008 R2 that stores a large collection of media (mostly mp3s) and I want to be able to deliver these files using a server/client setup with Windows Media Player being the client. I downloaded and installed Streaming Media Services Role. I even setup a publishing point with on-demand access. My issue is I can connect using WMP12 but it only connects as more of a stream and not a shared library. I can pause/play/skip as if it's a powerful radio station which is ok in my book but what I'd really like to do is allow me to control my music remotely, search and play for artists, maybe create playlists (not required but nice) and even connect it to an xbox. Is Streaming Media Services Role not what I should be using for this? Would installing WMP and sharing using that mechanism be a better option? Any Ideas?

  Read the article

• Can't get my Raspberry Pi to keep a static IP

  - by JonnyIrving

  I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

  Read the article

• Can't find netbooted for Kerrighed pxe boot with Ubuntu Lucid Server

  - by Pengin

  I'm following installation guides for pxe booting and kerrighed. I can't find the package nfsbooted for Ubuntu 10.04. Where did it go? Context: At work I have access to 8 mini-ITX PCs and am trying to build a cluster. My plans include trying Condor, GridGain, Hadoop, and recently Kerrighed has caught my eye. (I reaslise these are all for different kinds of things, I'm just evaluating). Ideally, I'd like to have all the nodes network boot from a single server, since that seems so much easier to manage, plus I can 'borrow' additional PCs for a while without touching their HD. I've been getting on great with Ubuntu Lucid Server (10.04), trying to follow the only guides I can find to get pxe booting (and ultimately kerrighed) to work. This guide is for Ubuntu 8.04 and this one is for Debian. They both refer to a package I can't seem to find, nfsbooted. Has this package been replaced? Am I doing something daft?

  Read the article

• Why is this static routing not working ?

  - by geeko

  Greeting gurus, I'm trying to develop a DHCP enforcement extension like Microsoft NAP. My trick to block dynamic-IP requesting machines (that don't meet certain policy) is to strip the default gateway (no default gateway) stated in the IP lease and set the lease subnet mask to 255.255.255.255. Now I need the blocked machines to be able to reach some specific locations (IPs) on the network. To allow for this, I'm including some static routes in the lease. For example, I'm including 10.10.10.11 via router 10.10.10.254 (the one to which the blocked machine that needs to access 10.10.10.11 is connected). Unfortunately, as soon as I set the default gateway to nothing, blocked machines cannot reach any of the added static routes. I also tried classless static routes. Any ideas ? any one knows how MS NAP actually do it ? Geeko

  Read the article

• Temp files created in every folder in Windows Server 2003

  - by i.h4d35

  So we have some folders which are shared over the AD Domain (Windows Server 2003). It was just noticed that in 2 of those folders (which contain only Excel and Word files), whenever a file is opened and closed, the temp file which was opened corresponding to that file still remains. Apparently, this's been going on for the past couple of years (which has led to an insane amount of temp files in each folder/subfolder under those shared folders). These shared folders are under the D:drive and not C: drive. There is only one group (containing 2 users) who access the said folders. I cannot understand if this has to do with the settings/permissions for the User/Group/Individual Client machine. For now, I have manually deleted all the temp files from each folder/subfolder. While this is not critical at the moment, I'd still like to clear this up. Also, it takes an additional fraction of a second to open folders that contains more than 10,000 temp files. Thanks in advance.

  Read the article

• How can I slightly delay the pop up of the task bar?

  - by Xavierjazz

  Windows XP SP3 Many times as I head to the bottom of my desktop, I will slightly overshoot the target at the bottom and the task bar will pop up, hiding the target. I then have to move the cursor out of it so it retreats and then again try to access the target. Is there a way to add an interval, say, 1 second, to the task bar popping up so I can adjust to the target before the task bar covers it? EDIT: as per my answer below, "What I ended up doing is just docking it on the LH side of the screen. There is no change in response but I don't go to that location so often so it's much better.".

  Read the article

• Disk image of a Windows 2000 NTFS hard drive

  - by Federico

  Hi, I need to create a disk image from a Windows 2000, NTFS formatted, hard drive. This image has to be used to create backup hard drives to replace the original disk in case an emergency situation arises. This is a medical equipment, so I cannot physically disconnect the disk because I would violate the warranty of the equipment. This machine has a DVD R/W, ethernet and USB 2.0 access, and we have the rights to install any application I want in the Windows 2000 system. 1) Is there any way to do this without installing any new software in the Windows 2000 system, so it is the least invasive as possible? 2) If we have to install a software to do the backup, which software do you recommend? Any hint will be greatly appreciated. Thanks in advance, Federico

  Read the article

• Domain and TS migration

  - by Windex

  The migration steps outlined by Microsoft in the ts migration seem to deal with moving TS to a different server on the same domain and call for adding the licensing service to another system, move the licenses and then put TS on whatever server you want. However with migrating the domain as well I don't have any place to move the TS server to. So my thought was to simply re-activate my licenses on the new server using the same method as a new TS setup. My question is essentially will this work the way I think it will or will the MS activation clearing house deny the new server? Is there a procedure to follow that "deactivates" the licenses on a server so that the clearing house knows there are some free? (FWIW I can look up the license information through the eopen website and have access to the original license doc.)

  Read the article

• VMWare Fusion cannot connect to the NAT connection on my Mac

  - by FFish

  I have been using VMWare Fusion on my Mac to check out my websites on localhost. Now I can't connect anymore with the NAT connection. There seems to be a problem with my IP address or Mac address? I have no idea what causes this, it was working fine before!? In the XP (SP2) VM, in the taskbar I see the Local Area Connection with the yellow warning icon. The bubble says: "This connection has limited or no connectivity. You might not be aisle to access the Internet or some network resources. For more information, click this message." Doing that opens up the Local Area Connection Status panel. In the Support tab, when I click the repair button I get following message: "Windows could not finish repairing the problem because the following action cannot be completed: Renewing IP address." Any help would be greatly appreciated.

  Read the article

• How is this modsec rule getting triggered?

  - by BipedalShark

  I made a GET request to the URL, http://domain.tld/test/docs/index.php?create_table=1&step=2 and got a 403 response code. It turns out this modsec rule is getting triggered: Access denied with code 403 (phase 2). Pattern match "(?:ogg|gopher|zlib|(?:ht|f)tps?)\:/" at ARGS:gltr_redir. [file "/opt/mod_security/10_asl_rules.conf"] [line "827"] [id "340153"] [rev "22"] [msg "Generic PHP code injection protection via ARGS 3"] [severity "CRITICAL"] I would assume ARGS refers to GET/POST data, but there's no gltr_redir in the query string. And, being a GET request, there's obviously no POST data. So how is this rule being triggered?

  Read the article

• Copying a large directory tree locally? cp or rsync?

  - by Rory

  I have to copy a large directory tree, about 1.8 TB. It's all local. Out of habit I'd use rsync, however I wonder if there's much point, and if I should rather use cp. I'm worried about permissions and uid/gid, since they have to be preserved in the clopy (I know rsync does this). As well as thinks like symlinks. The destination is empty, so I don't have to worry about conditionally updating some files. It's all local disk access, so I don't have to worry about ssh or network. The reason I'd be tempted away from rsync, is because rsync might do more than I need. rsync checksums files. I don't need that, and am concerned that it might take longer than cp. So what do you reckon, rsync or cp?

  Read the article

• Changes user's email on crowd doesn't apply in confluence

  - by donamir

  Hi It's my configuration: Atlassian Crowd Version: 2.0.2 (Build:#409 - 06-10-2009) Atlassian Confluence 3.0.2 I can't change users' emails in Confluence because I use Crowd as external user management. So I have to change users' emails in Crowd but changes doesn't apply in Confluence. Even users has access to crowd user console and can login to Crowd and view their profile and edit their email password but changed emails doesn't apply in Confluence. What should I do? Is it a bug? Also I should mention that emails contains dot character(.). I posted my question to Atlassian forum 3 days ago but there's no answer yet!

  Read the article

• Taking ownership of trustedinstaller files?

  - by P a u l

  vista32-sp1: I am unable to delete some files on my system that were installed with 'special permissions' by 'trustedinstaller'. I find the usual help suggestion to use 'takeown' is not working, all I get is access denied. I refuse to believe there isn't some way to delete these files, or that microsoft has finally acheived their perfect security filesystem. This is NOT a case of a file being locked by a process. If this is all it was, I could solve this by myself. I know there are some recommended unlocking programs and they might do some sort of file system trick, but I would like to know what my possible direct actions might be. If a 3rd party program can 'unlock' a file, I want to know the mechanism. But like I said 'takeown' at the command line is not working for this.

  Read the article

• apache server not working after installing zend server

  - by kamal

  i have apache installed in my redhat 5.3 server machine. and i was trying to install zend server. i installed zend server with install.sh file in directory /var/zend. in my windows machine after installling zend server community edition i was able to access apache server as well as zend server. but in my linux machine localhost displays nothing and localhost:10081 shows zend server. what can i do to run my localhost? or should i seperately install apache?

  Read the article

• Where is the Plesk Error Log / Or how can I get Plesk running again?

  - by Josh Pennington

  I currently have a VPS that is running Plesk and for some unknown reason it will not start. All the more information it gives me about it not starting is the following: Operation start with the VPS(s) VEID54635644 service "psa" is finished with errors: #703 Can not start/stop/restart service: service "psa" status is not "running" after command "start". This does really mean anything to me. Currently my server provider does not seem interested in helping me get Plesk running again so I am hoping I can get this going again on my own. I am assuming that there has to be an error log SOMEWHERE for Plesk, but the only thing I can find is located at /usr/local/psa/admin/logs/httpds_access_log and that just looks like an access log, not an error log (it is the only file in the directory). Is there another log somewhere in the system for this that I do not know about? Is there a way to find out why Plesk did not start? Thanks Josh Pennington

  Read the article

< Previous Page | 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033  | Next Page >