Search Results

Search found 38458 results on 1539 pages for 'remote access'.

Page 1032/1539 | < Previous Page | 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039  | Next Page >

• Connecting two pcs through cable, at the same time as wireless

  - by Steffen

  I've got 2 pcs setup with WLAN - however when I copy files between the machines it takes forever (obviously, since I run 801.11g). So I thought, why not just connect them directly with a cable (my wireless router is the other end of the house, that's why I don't use cables to that) However how should I configure the LAN connection on each machine, so I can use it for transferring files between them, whilst using my WLAN to access the Internet ? I was thinking about letting one machine be gateway, but then Windows pops up with a lot of warnings (basically it says this won't work when you're using two disjoint networks) And now I'm at a loss as to what to try.

  Read the article

• How do I configure pfsense as an outbound VPN client?

  - by Avery Chan

  We use pfsense as a router/firewall. Because we're based in China, it is useful for us to have VPN access for all our internal clients. Instead of each individual client connecting to a VPN server stateside, I'd like to configure pfsense as a VPN client and have all the network traffic be routed through it. Most of the posts I've seen regarding pfsense and VPN are concerning connecting to the LAN from outside; this is not what I want to do. Another option would be for an SSH tunnel to be initiated on the pfsense box with the LAN traffic routed through it. How do I configure pfsense to be able to do either of these? One huge caveat is that OpenVPN cannot be used. The solution I am looking for needs to use one of the other VPN protocols.

  Read the article

• How to perform diagnostics (stress test) on HP Smartarray Controller

  - by pepoluan

  At my office, we have a server that we suspect its RAID controller (HP Smartarray) is failing. A cold boot, however, does not indicate anything. Can anyone recommend me a method to stress-test the controller? Symptoms that makes me suspect a failing controller: Disk access getting slower, queue getting longer Running dmesg on the XenServer console I see many messages similar to this one: end_request: I/O error, dev tda, sector 253655584 (the sector number is never the same) When we move the VM to another physical host, we no longer see the above message Running idle (without any running VM), the dmesg no longer emit the above message A search on Google indicated that the above message is most commonly associated with a failing SmartArray controller. How can I be sure that the SmartArray controller is failing?

  Read the article

• How to make subdirectory the document root of a web domain or localhost

  - by Ben Huh

  I have a subdirectory abc in the document root /var/www/html I want to be able to run any file any_file.html within the subdirectory by typing in the browser: localhost/any_file instead of localhost/abc/any_file.html or my_domain.com/any_file instead of my_domain.com/abc/any_file.html I tried writing in httpd.conf: <Directory "/var/www/html/abc"> RewriteEngine On RewriteBase / RewriteRule %{REQUEST_FILENAME} %{REQUEST_FILENAME}\.html </Directory> But it doesn't work. Options FollowSymLinks is activated in <Directory> so I believe I would not need to write this again. Does anyone knows why and how to solve it? Thanks. Update: I have another subdirectory efg which I need to be able to access through localhost.

  Read the article

• Advice on new hardware firewall for a small company server-environment

  - by Mestika

  Hi everyone, My companies currently hardware firewall (an old ZyXEL ZyWALL firewall) and is indeed requiring an update to a new firewall. It is a small company with a similar small server-environment, so the need for a huge, complex and expensive solution isn’t there but a more “straight-forward” firewall, that can provide the necessary security to our systems and block unwanted elements from the core server and only accept access through our one server which is used as an “gateway” between the Internet and our internal network. I haven’t that much experience with hardware firewalls so I’m requesting any good advice and/or knowledge on which products will be suited for our specific need. If you need more information about the specific needs we require, please let me know and I’ll provide them to you. Sincerely - Mestika

  Read the article

• How do I make webmin secure?

  - by Josiah

  I want to install webmin to make server administration tasks on my Ubuntu 10.4 server easier. However I'm very nervious about having that kind of power accessable over the web. So I want to know how to secure webmin so that it can't be used to comprimise my server. So far here are my ideas, but I still don't feel comfortable: Make webmin accessable from only the localhost (how?) Use SSH tunneling to access the webmin server whenever I need to administrate it Can anyone help me with instructions on making webmin accessable only from the localhost? What other ways can I make webmin secure?

  Read the article

• How do you make the computer locked when the monitor is turned off but power not off in Windows Vista?

  - by Anon

  I have a power management setting (set up through the Control Panel) that turns the monitor off after 5 minutes of idling but keeps the power on all time, if the laptop is connected to power. Under this setting, however, the computer doesn't lock itself and becomes vulnerable to any passerby's attempt to log in if I'm not around. Is there any way to force lock in this situation? (I can force lock if I have the laptop go sleep, but for immediate access I'd like to keep the power on when the laptop is connected to power.)

  Read the article

• CentOS Default ACLs on Existing File System Objects

  - by macinjosh

  Is there a way to have existing file system objects inherit newly set default ACL settings of their parent directories? The reason I need to do this is that I have an user who connect via SFTP to my server. They are able to change directories in their FTP client and see the root folder and the rest of the server. They don't have permissions to change or edit anything but their own user directory but I would like to prevent them from even view the contents of other directories. Is there a better way to do this than ACLs? If ACLs are the way to go I'm assuming a default ACL on the root directory would be the best way to do restrict access. I could then selectively give the user permission to view certain directories. The problem is default ACLs are only inherited by new file system objects and not existing ones.

  Read the article

• Create Virtual Image of Laptop before Formatting

  - by Simon Mark Smith

  I have a 3 year old laptop running Windows XP that I used for business. Although I have not used the laptop in over a year, I now want to re-commission it with Windows 7 and a fresh install. Before I do the fresh install I want to create a Virtual Image of the laptop that I can keep and potentially run on my desktop machine should I ever need to access any of the old files/projects that it contains currently. I know that most people will say just copy the files over to your desktop, but my concern is the configuration of the laptop. I used to use it for development and it has older versions of Visual Studio, SQL Server, Active X controls etc, etc than I currently use so I really want to preserve the environment not just the files. So really I am asking what is the best tool-set/method to achieve this? I understand there are free VM tools available but I have never done this before and would appreciate any help.

  Read the article

• Need Help with fixing permissions in mounted Drive

  - by Master

  I am trying a lot still my problem is not solved. I have a partion called Server and inside it i have 5 folders like Folder 1 FOlder 2 Folder 3 I am mounting the drive on startup by using following command as told to me by some senoir members and it works but with some problems /dev/sdb1 /media/Server ntfs defaults,umask=006,fmask=000,dmask=007,uid=1000,gid=1001 0 0 The problem is with this command the permission are applied to all folders like Folder 1 , Folder 2 , FOlder3 But i want that only FOlder 3 should be publicly readable and writable while all other should be private and no one should have access to that. How can i achieve that

  Read the article

• Booting Windows7 kernel from an initrd/wim image file

  - by Ivo

  I'm wondering if it's possibile to have Win7 kernel and relative drivers (especially storage drivers) to boot from an initrd-like image file (maybe .wim?) and later then mount the windows root partition and complete the load of the full OS? I'll try to explain why: I'm running an emulated environment with NO REAL BIOS, and I'm passingthrough a raid storage controller. I want windows to boot from this controller array, but of course the BCD manager cannot access disks in the array until kernel and relative controller storage drivers are loaded. To be clear I get the classical winload.exe missing error. I need a similar solution to what Linux does, loading the kernel and his drivers, and later then mount the root partition and complete the boot. Any ideas or advices?

  Read the article

• Apache log file problem

  - by Luke

  I've recently set up an Apache 2 web server and I noticed a quite a few lines in the error and access log that start with the follow sequence (but longer). Does anyone know where this comes from? ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ....... My set up is an Apache 2 load balancer with mod_balancer enabled and two Apache 2 web servers. All three servers write to the same log files on a share located on a NFS. My first guess is that my problem has to do with it since it's the only difference that comes to mind from other set ups I've used in the past but I'm not sure.

  Read the article

• Where can I find logs for SFTP?

  - by Jake

  I'm trying to set up sftp-server but the client is getting an error, Connection closed by server with exitcode 1 /var/log/auth.log (below) doesn't help much, how can I find out what the error is? I'm running Ubuntu 10.04.1 LTS sshd[27236]: Accepted password for theuser from (my ip) port 13547 ssh2 sshd[27236]: pam_unix(sshd:session): session opened for user theuser by (uid=0) sshd[27300]: subsystem request for sftp sshd[27236]: pam_unix(sshd:session): session closed for user theuser Update: I've been prodding this for a while now, I've got the sftp command on another server giving me a more useful error. Request for subsystem 'sftp' failed on channel 0 Couldn't read packet: Connection reset by peer Everything I've found on the net suggests this id a problem with sftp-server but when I remove the chroot from sshd config I can access the system. I assume this means sftp-server is accessible and set up correctly.

  Read the article

• Free DNS software with failover support?

  - by Lin

  I'm looking for DNS software that can accomplish the following: Check health of all A records at set intervals If server is unresponsive after multiple successive checks, replace A record with a working server When a server is down, check it periodically. Once it's up, restore normal A records Here's an equivalent I thought of: Run DNS servers with very low TTL (minutes) Use a cron job to periodically query all webservers Use sed to replace A records if need be, and then restart DNS server I have a hard time believing there isn't already something that can accomplish the above. I'm not looking for a paid service, and I'm restricted to anything I can run with root access to a VPS. Any suggestions would be great. Thanks!

  Read the article

• Unix domain socket firewall

  - by lagab

  Hello, everyone. I've got a problem with my debian server. Probably there is some vulnerable script at my web-serser, which is running from www-data user. I also have samba with winbind installed, and samba is joined to windows domain. So, probably this vulnerable script allows hacker to bruteforce out domain controller through winbind unix domain socket. Actually I have lots of such lines at netstat -a output: unix 3 [ ] STREAM CONNECTED 509027 /var/run/samba/winbindd_privileged/pipe And our DC logs contain lots of recorded authentication attems from root or guest accounts. How can I restrict my apaches access to winbind? I had an idea to use some kind of firewall for IPC sockets. Is it possible?

  Read the article

• how does openvpn decide which interface to get IP addrs from

  - by bkrupa

  Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on?

  Read the article

• Mercurial browser on Windows 2003 takes several refreshes before displaying repositories

  - by Tim Murphy

  When attempt to browse my Mercurial repositories it usually takes several refreshes before the repository list is displayed. The configuration is as follows: Windows Server 2003 (Dedicated machine hosted by http://www.server4you.com/. Site has anonymous password protection with self-signed SSL. Mercurial 1.5.3 Python 2.6.5 Python for Windows 32 extensions 214 py2.6 isapi-wsgi 0.4.2 The repositories are being served via ISAPI using the standard hgwebdir_wspi.py file (copy to follow). Other problems with the repository server: Before doing a clone/push/etc I have to browse the repositories first otherwise hg on my local machine can not locate the site. I have one a repository with a large changeset that after a minute or so throw error "abort: error: An existing connection was forcibly closed by the remote host". Will be asking another question for this problem. What can I do to start tracking down this problem? hgwebdir_wsgi.py # Configuration file location hgweb_config = r'C:\Public\Mercurial\WebSite\hgweb.config' # Global settings for IIS path translation path_strip = 0 # Strip this many path elements off (when using url rewrite) path_prefix = 0 # This many path elements are prefixes (depends on the # virtual path of the IIS application). import sys # Adjust python path if this is not a system-wide install #sys.path.insert(0, r'c:\path\to\python\lib') # Enable tracing. Run 'python -m win32traceutil' to debug if hasattr(sys, 'isapidllhandle'): import win32traceutil # To serve pages in local charset instead of UTF-8, remove the two lines below import os os.environ['HGENCODING'] = 'UTF-8' import isapi_wsgi from mercurial import demandimport; demandimport.enable() from mercurial.hgweb.hgwebdir_mod import hgwebdir # Example tweak: Replace isapi_wsgi's handler to provide better error message # Other stuff could also be done here, like logging errors etc. class WsgiHandler(isapi_wsgi.IsapiWsgiHandler): error_status = '500 Internal Server Error' # less silly error message isapi_wsgi.IsapiWsgiHandler = WsgiHandler # Only create the hgwebdir instance once application = hgwebdir(hgweb_config) def handler(environ, start_response): # Translate IIS's weird URLs url = environ['SCRIPT_NAME'] + environ['PATH_INFO'] paths = url[1:].split('/')[path_strip:] script_name = '/' + '/'.join(paths[:path_prefix]) path_info = '/'.join(paths[path_prefix:]) if path_info: path_info = '/' + path_info environ['SCRIPT_NAME'] = script_name environ['PATH_INFO'] = path_info return application(environ, start_response) def __ExtensionFactory__(): return isapi_wsgi.ISAPISimpleHandler(handler) if __name__=='__main__': from isapi.install import * params = ISAPIParameters() HandleCommandLine(params) hgweb.config [paths] / = C:\Public\Mercurial\Repositories\* [web] allow_archive = bz2 gz zip ; Allows archive downloads. allow_push = ######## ; Users that are allowed to push.

  Read the article

• The canonical "blocking BitTorrent" question

  - by Aphex5

  How can one block, or severely slow down, BitTorrent and similar peer-to-peer (P2P) services on one's small home/office network? In searching Server Fault I wasn't able to find a question that served as a rallying point for the best technical ideas on this. The existing questions are all about specific situations, and the dominant answers are social/legal in nature. Those are valid approaches, but a purely technical discussion would be useful to a lot of people, I suspect. Let's assume that you don't have access to the machines on the network. With encryption use increasing in P2P traffic, it seems like stateful packet inspection is becoming a less workable solution. One idea that seems to make sense to me is simply throttling down heavy users by IP, regardless of what they're sending or receiving -- but it doesn't seem many routers support that functionality at the moment. What's your preferred method to throttle P2P/BitTorrent traffic? My apologies if this is a dupe.

  Read the article

• Accessing Windows 7 Printer from Ubuntu Linux via LPR/LPD or Samba

  - by nitbuntu

  Hi, I'm having difficulty printing from my Linux (Ubuntu 10.04) based PC to a printer connected to a Windows 7 machine. I was trying to connect using Samba (version 3.5.6) but this always brings up an authentication screen which never accepts any password I use. So I read somewhere that an alternative is to access the Windows printer via LPR/LPD. I added an LPR/LPD printer in Windows 7, but even within Windows 7, I am not able to print as the print que monitor shows as 'printer busy'. The printer in question is an Epson Stylus DX7400 and works fine when using the standard USB ports....but doesn't when I use with the LPR/LPD ports. I even opened up the TCP/IP port 515 in my McAfee firewall without any success. Any help with this would be highly appreciated. Additionally, does anyone have any idea how I can get Samba working for me?

  Read the article

• subversion problem on mac os x

  - by Mohsin Jimmy

  This exists in my httpd.conf file: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn Allow from all #AuthType Basic #AuthName "Subversion repository" #AuthUserFile /Users/iirp/Sites/svn-auth-file #Require valid-user </Location> This is working file When I change this to: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn #Allow from all AuthType Basic AuthName "Subversion repository" AuthUserFile /Users/iirp/Sites/svn-auth-file Require valid-user </Location> and when I access my repository through URL, it gives me the authentication screen but after that screen my svn repository is not showing up correctly. to see message that it gives to me is: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

  Read the article

• Can not search my company howto blog site anylonger in Sharepoint

  - by Worldunix

  I have a Howto company Blog site that i post to for my clients to access for help. For some reason it has stopped letting anyone search on it. I can search for Mysites or users. But when you drop down the tab to search: This Site: "blog site name" you get the following reply: No results matching your search were found. Check your spelling. Are the words in your query spelled correctly? Try using synonyms. Maybe what you're looking for uses slightly different words. Make your search more general. Try more general terms in place of specific ones. Try your search in a different scope. Different scopes can have different results. I have tried the following command: from the Index server net stop osearch net start osearch iisreset /noforce But still not able to search a local blog site I can only search for users and Sites. please help Don

  Read the article

• Can not search my company howto blog site anylonger in Sharepoint

  - by Worldunix

  I have a Howto company Blog site that i post to for my clients to access for help. For some reason it has stopped letting anyone search on it. I can search for Mysites or users. But when you drop down the tab to search: This Site: "blog site name" you get the following reply: No results matching your search were found. Check your spelling. Are the words in your query spelled correctly? Try using synonyms. Maybe what you're looking for uses slightly different words. Make your search more general. Try more general terms in place of specific ones. Try your search in a different scope. Different scopes can have different results. I have tried the following command: from the Index server net stop osearch net start osearch iisreset /noforce But still not able to search a local blog site I can only search for users and Sites. please help Don

  Read the article

• Wireless DHCP doesn't work until wired Ethernet plugged in

  - by MT_Head

  A client of mine has an Asus R1F tablet running Windows XP Tablet SP3. It has an Intel 3945ABG wireless card; wired Ethernet is a Realtek something-or-other. In the past few days, it's developed an odd problem: WiFi authenticates, but can't get an address via DHCP. plug in wired Ethernet - both interfaces get good addresses unplug cable, WiFi continues to work until shutdown. Next morning, repeat process. I've tried: turning WiFi off/on (there's a slider switch) disabling/re-enabling via Device Mangler uninstalling and reinstalling the driver for the 3945ABG... changing from Intel Pro/SET to Windows Wireless Zero Config (and back) restarting the router changing the static DHCP assignments at the router upgrading the router firmware, just on general principles The router/access point is pfSense 1.2.3RC1 (was 1.2.2); wireless card is Atheros-based. None of the 12 other users (5 with tablets) are having problems.

  Read the article

• Why do Windows 7 & 8 have different default behaviour when trying to modify contents of protected folder

  - by Ben

  Here's the situation: I have a Windows 7 PC and a Windows 8 PC and I'm logged in as the same domain user on both machines. My domain user is in the local Administrator group on both. When I run cmd.exe on each machine and then attempt to do this (also on both machines) mkdir "c:\Program Files\cheese" the Windows 8 PC gives an "Access Denied" error, while it works fine on the Windows 7 PC. I understand that C:\Program Files is a protected folder and I'm not interested in a debate on the morals of writing to such a folder directly. But I am interested in understanding what exactly has changed in Windows 8 to cause this. I don't seem to be able to find anything that acknowledges or explains this change in behaviour in Windows 8.

  Read the article

• Sharing iTunes Library Between Mac & PC Via A NAS

  - by Franco

  Hi Everyone, I'd be really grateful if anyone can help me with this, I spent literally days trawling the net before I came across this site, which seems to have very knowledgable people! So, the problem is: For years I've had a couple of PCs and a NAS drive. I've been storing all my music on the NAS drive and then accessing the library on whichever PC I wanted to by pointing both PCs to the NAS drive iTunes files. The good thing is I can see all my playlists and song ratings etc. Now, I've just bought a Macbook Pro as well. And I want to be able to access the same music, song ratings etc on this machine. I've tried simply holding down option and navigating to the .itl files that my Windows machine created, but that doesn't work. Is there some way to use the same iTunes Library (apart from home sharing) on both machines? Thank you so much for reading this.

  Read the article

< Previous Page | 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039  | Next Page >