Search Results

Search found 3214 results on 129 pages for 'dell latitude'.

Page 103/129 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• Running out of space on a SAS-based workstation

  - by SteveWilkinson

  Hi - first question on serverfault - pls excuse if asked elsewhere. I have a Dell Precision 690 with one 73GB (15000RPM) SAS drive in it. Running Windows 7 (x64) with a bunch of apps means it is running out of space. I have on order a 147GB (15000RPM) SAS drive (same GB/s, same make) which I want to put into the machine. Not knowing anything about SAS, do I need to replace the 73GB with the 147GB and restore from a backup, or can I put the drive in the machine and get the controller to treat the two drives as one large one? (The original paperwork for the machine says 73GB SAS (No RAID) if that is relevant.) Thanks in advance.

  Read the article

• XP Laptop Restarting

  - by Liath

  I have a Dell 1525 which I reinstalled xp on recently due to a hard disk problem. Apparently I've missed something, it's taken to restarting for no apparent reason (I believe it's too frequent for windows updates which was my first thought). Last night it was particularly bad, it stopped 5 times in 2 hours while playing an online game. I can't actually think of a time it's happened when it's not running something in full screen mode. I can't see anything in the event log apart from usual start up details. How can I find and fix this issue?

  Read the article

• second monitor wont display

  - by Ryan

  hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

  Read the article

• How can I tell if my live web-server is overloaded?

  - by Nick G

  We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

  Read the article

• Overheating on Ubuntu 12.04

  - by mati

  I have a Dell Inspiron Q17R with two graphic cards and I noticed that it is overheating. I installed Bumblebee, Jupiter and Flashblock, and I followed this guide as well, but it still got up to 74C. Is there anything more I can do? It still doesn't really seem to be working well and the fan keeps spinning really fast. After performing the following test: sensors in the terminal, this is what I got: Adapter: Virtual device temp1: +75.0°C (crit = +100.0°C) temp2: +75.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +65.0°C (high = +86.0°C, crit = +100.0°C) it doesn't look good.

  Read the article

• Is it safe to compress my Windows 7 %USERPROFILE%\AppData folder?

  - by Kev

  Having just read Scott Hanselman's latest blog entry, Guide to Freeing up Disk Space under Windows 7, he suggests turning on NTFS compression which I already do for a number of less travelled folders that contain static files such as downloads or images. However I am wondering if it's wise to turn on NTFS compression for the whole of my %USERPROFILE%\AppData folder? My system drive is a 128 GB SSD residing in a Dell Precision T5400 3Ghz Quad Core Xeon workstation so I ought not to notice the extra cycles used to compress and decompress files on their way to and from the disk. However would there be any good reasons not to do this? In fact could I safely compress the whole of my %USERPROFILE% folder?

  Read the article

• 'DNS service isn't responding' in windows 7

  - by pradeeptp

  Hi All, I bought a brand new Dell Studio 1558 just last week. It has windows 7 home premium 64-bit installed on it. My friend who is occupying the adjacent room has a laptop with windows XP. Both of us are connecting to the same wireless router of the hotel. My friend is able to connect to the wireless network without any trouble, but when I try to connect, I get the error "DNS service isn't responding". I met two more people in the same hotel with win XP laptop and they too dont have any problem. I have gone to possibly all the forums and website but I haven't been able to fix this error :(. I have done all the basic troubleshooting but I have no luck yet. Pls help. Following is one forum where the problem seem to have been trouble shooted but not for all. http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/eeb84518-903d-46d1-9398-80cf211878d7

  Read the article

• Should we install the OS on an SSD or not when running virtual machines?

  - by Raghu Dodda

  I have a new Dell Mobile Precision M6500 laptop with 8 GB RAM. it has two hard drives - 500 GB @7200 RPM and a 128 GB SSD. The main purpose of these laptop is software development in virtual machines. The plan is to install the base OS (Windows 7) and all the programs in the 500 GB drive, and let the SSD only contain the virtual machine images. It is my understanding that the we get most performance from the virtual machines if the images are on a separate hard drive than the base OS. Is this the way to go, or should I install the OS on the SSD as well? What are the pros and cons? The virtual machine images would be between 20 - 30 GB, and I might run 1 or 2 at a time.

  Read the article

• Microphone array support in Windows. Info on performance and compatible hardware?

  - by exinocactus

  It is officially claimed by Microsoft (Audio Device Technologies for Windows), that Windows Vista has an integrated system-level support of microphone arrays for improved sound capturing by isolating a sound source in target direction and rejecting ambient noise and reverberation. In more technical terms, an implementation of an adaptive beamformer. Theoretically, microphone arrays with 2-4 mics can substantially improve SNR under some conditions like speaker in front of the laptop in noisy environment (airport, cafe). Surprisingly, though, I find very little information about commercially-available products supporting these new features. I mean products like portable usb micropone arrays or laptops or flat screens with integrated mic arrays. I could only find info about two laptop models having "noise cancelling digital array microphone". These are Dell Latitude and Eee PC 1008P-KR. Now my questions: Do you have any experience with the Windows beamformer implementation? For instance, in the above mentioned laptops. How well does it work? Are there any tests results available in the net or in print (papers?)? Do you know about other microphone array hardware? What could be the reason why mic array technology didn't get sucess Is there mic arrays support in 'Windows 7'?

  Read the article

• Logitech USB keyboard driver not found on Windows 7 x64

  - by AngCaruso

  I have a Logitech Internet 350 Keyboard which has been working fine on my Lenovo T400 laptop for well over three years. Just within the past week or so, Windows 7 can no longer find the driver for it. There is no custom driver from Logitech for this device -- it uses the generic Windows USB HID driver. The keyboard works just fine from the BIOS (and Linux which I dual boot this machine), but Windows 7 cannot find or load the driver for it. Any ideas? I smell a Windows update problem, but have no idea how to fix it, and I really am not interested in rolling back updates. New Info: I just tested a generic Dell USB keyboard and it worked just find, with Windows immediately recognizing the device and installing the HID keyboard class driver. So, it seems that Windows has decided not to recognize my specific Logitech keyboard device. I still suspect a Windows update issue, but I would love to hear other suggestions.

  Read the article

• Function key taken by another program, how to default it

  - by Milox

  Everytime I press the F11 key it opens up a browser window with the same URL. This happens anywhere I press it and I need this key to have it's default behavior because I use it to program on Visual Studio (Windows 7). Any ideas why this is happening and how to go back to default function keys?, I haven't installed anything that I remember can cause this behavior. This is a standard Dell desktop key board, no multimedia keys, like this one: Firing URL is http://argos:8080/Login.jsp?jsessionid=55rh3obsahm9m seems like one of our company's internal addresses but IT guys say they have no idea about it. I don't see any suspicious software that can be causing this.

  Read the article

• How to install windows on a server with no CD or DVD drive

  - by user29266

  I've found a few posts on this site, however my situation is different. I have a new Dell server with no OS installed. I would like to install Windows 2008 Web Edition. I have a few USB ports and Ethernet. No CD or DVD drives. Is this article the best & only way to proceed? Installing Windows 2008 via USB thumbdrive or should I just get a external hardrive and hook it up to a usb. Once the OS is installed I'll never need a DVD drive again - so that's idea is a waste of money.

  Read the article

• Laptop forgets second monitor when it goes to sleep

  - by al c

  I recently updated my nvidia driver... now I have to re-establish the connection to my second monitor everytime the laptop goes to sleep. When I open the NVIDIA control panel, the second monitor is listed there but the checkbox beside it has been cleared. Oddly my laptop screen is identified as display #3 and the external screen as display #4. Is there a registry key that I can clear to get them set back to #1 & #2? Will that fix the problem? Or is there a simpler solution. (It's a Dell Studio XPS laptop with GeForce 9500M running Windows Vista 64-bit) TIA Al

  Read the article

• Windows Home Server restore causes computer to be removed from the domain?

  - by unknown (google)

  I restored my Dell M4400 that is a company laptop, and now I get an error when I try to log on and am connected to our corporate network, which says that the domain controller could not be found or that the computer is not part of the domain. Everyone else can log on, so it seems my computer is no longer part of the domain, even though it thinks it is per the settings. One thing of note: my computer crashed on 1/14/10, but I restored from a backup that was made on 12/20/09. So I am not sure if that made a difference? Also, I tried running "gpupdate" to update my group policy, but that did not seem to help. Any ideas? Seems like a bit of a flaw in the backup system for computers that are part of a domain. I guess I wanted to hear from someone with more knowledge about how a computer is recognized as part of a domain to know if this should be expected when doing a restore or if I should file a trouble ticket.

  Read the article

• Windows 7/8 can't connect to an N Router

  - by xenoterracide

  I have a router running OpenWRT backfire, with N and A/B/G being broadcast. A linux laptop, and a Mac laptop can see the N network and connect to it (or at least they could last weekend). But there is now a Windows 7 Desktop with a B/G/N wireless card, and a Windows 8 Laptop with a B/G/N wireless card that can't see the N network only the B/G broadcast. The B/G and N have different SSID's and Encryption ( WEP and WPA2 PSK respectively ). The N SSID isn't even visible. Does anyone have any suggestions as to how to troubleshoot further? Or what might be the cause? update wireless info Desktop Dell Wireless 1502 802.11b/g/n Atheros Communications Inc 9.2.0.412

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• Unauthorized computer use via keyboard or remote access?

  - by brydaverambo

  I’m suspecting my computer is being used when I’m not at home. This is happening either physically or remotely. My wireless switch is off. Is there any way possible to detect and/or monitor activity without purchasing software? My settings are being changed as well as passwords (Bios PW was changed and I cannot access Bios settings). I connect via the network cable. Is it possible for someone (in range) to connect to my laptop even if the wireless switch is off? This is a Dell Inspiron 1720 with the WLAN 1395 card. Here’s the kicker. When I try to download freeware for monitoring activity, I am not allowed to do this! ????

  Read the article

• Boot from Second SATA Drive

  - by Chris

  I have a Dell Precision 490 Workstation, and I just had my other question answered, Install Ubuntu to drive B without impacting drive A, and now I'm having a boot sequence issue. The external drive is great, boots up fine on my laptop, but how do I tell my desktop to boot from my second SATA drive and not the first SATAdrive. My drive configuration as follows SATA-0: Windows SATA-1: DVDR SATA-2: Ubuntu When I choose the boot menu, the option I have is "Internal Hard Drive". I assume it searches all drives, and loads the first bootable one it finds (which happens to be Windows), but I'd like to be able to select the drive from a list. Has anyone experienced this? Is possible without disabling the first hard drive in the BIOS?

  Read the article

• 3 Monitors on a Notebook

  - by Rihan Meij

  I would like to use 3 screens on my Dell Inspiron 1720 So On the laptop built in screen have that as one, and then have 2 more screens. The catch is, that I want to play racing games with this set-up. So that my main screen is the focus area (the front window if you will) and the other 2 screens will be used for peripheral vision, on the side. The software that I use (LFS.net) does support multiple screens. However the notebook can have the main screen on, and another external screen. So I would need to split this "second" monitor output, to 2 screens, the one to the left of the main monitor, and the other one to the right. Is this possible? Is there perhaps a external card / docking station solution that could help with this? Any advice or ideas is greatly appreciated. Best Regards Rihan

  Read the article

• What could be causing MsiInstaller to continuously reconfigure applications(EventID 1035)?

  - by user7862

  I have a brand-new machine that we just installed Windows Server 2008 Enterprise on about two months ago. In the event log, I am seeing thousands of EventID 1035 logged. This is MsiInstaller reconfiguring about a dozen products over and over, looping about every half-hour. Has anyone seen this? As a beginning, I did a general web search, and most solutions revolved around Dell System Center or Google toolbar being installed as the culprit. We have neither of those products installed. Thanks for your help, Dale

  Read the article

• How to make RHEL have persistent local hdd name?

  - by Mxx

  I have 2 identical Dell R720 servers running identical Oracle Enterprise Linux(RHEL)6.4. Both servers (supposedly) configured in exactly the same way. However, one of the servers is behaving differently. Every other reboot its local HDD name(and related partitions) flip from /dev/sda to /dev/sdj. This is problematic because both servers are configured for multipathd, and if this flip happens their config does not match and Oracle DB(or its clusterware) complains that nodes are not configured identically. Why does one server has a consistent device names while the other server keeps flipping back and forth? How can I make local hdd to consistently be /dev/sda? I suspect this might have something to do with udev but I'm not sure.

  Read the article

• Resolution of monitor is not supported by motherboard

  - by Sandesh

  I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

  Read the article

• Problems with connecting to wireless network on windows 7

  - by Naveen

  I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

  Read the article

• virtual machines: optimal host os to run Windows XP guest os?

  - by user61132

  My department doesn't have the budget to upgrade my ailing Dell D620 laptop. However, I do have the option to buy my own personal computer, then use my company-issued ISO image to run Windows XP as my guest os using virtualbox or vmware. Therefore, last month, I bought an Acer AX3910-U3012 desktop that had Windows 7 as the host os (and 8G RAM). In short, I was disappointed with the performance while trying to run WinXP as the guest os. (It didn't perform much better than my laptop.) Just wondering what the optimal host os would be for running Windows XP as the guest os? (No, I can't use my company-issued ISO image to build the os for my personal computer.) FWIW, I'm willing to spend up to $2k if it's REALLY worth it, but would prefer to spend no more than $1k. Also, in an effort to cut costs, I'd prefer buy a desktop instead of a laptop. Thanks for any/all feedback.

  Read the article

• Power outage, Server 2K3 remains on "applying computer settings"

  - by syuroff

  My reward for clicking the "test" button in the APC UPS software was that it completely cut the power to my SQL server. The server promptly rebooted, the SQL service is running (verified by the app on another server that queries it), but the GUI has remained on "applying computer settings" for 20 minutes and counting, and it forbids RDC connections. Since SQL is up, it is fulfilling its key role, but it's obviously not right. What step to take next? Wait longer? Hardware is a Dell Poweredge 2850, internal RAID10.

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >