Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 113/1036 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Enabling "AllowDualLinkModes" in xorg.conf

  - by Gausie

  I'm using a GeForce GT 620 (which is dual-link compatable) and a DVI-I dual-link splitter to try to have a desktop extended onto two monitors. At the moment when I plug in the monitors, only the monitor on the female VGA marked "1" gets a signal, and the other screen gets nothing and only one screen is detected by nvidia-settings. After reading around, I have realised that my graphics card probably comes with dual-link disabled by default, and I can enable it by adding an "AllowDualLinkModes" option to my xorg.conf. This is the current state of my xorg.conf Section "Device" Identifier "Default Device" Option "NoLogo" "True" EndSection Where do I put the line about AllowDualLinkModes? Do I create a new Section? Have I misunderstood? Cheers Gausie

  Read the article

• Gett Tor and Irssi working together

  - by Joey Bagodonuts

  Hi I am trying to get Tor working with Irssi. The directions at the bottom of this page Freenode Install Link say to :~/.irssi$ tor MapAddress 10.40.40.40 p4fsi4ockecnea7l.onion Feb 12 04:26:51.101 [notice] Tor v0.2.1.29 (r318f470bc5f2ad43). This is experimental software. Do not rely on it for strong anonymity. (Running on Linux x86_64) Feb 12 04:26:51.101 [warn] Command-line option 'p4fsi4ockecnea7l.onion' with no value. Failing. Feb 12 04:26:51.101 [err] Reading config failed--see warnings above. Or add it to the torrc file and reload irssi .irssi$ cat /etc/tor/torrc |grep 10.40.40 mapaddress 10.40.40.40 p4fsi4ockecnea7l.onion This is a paste from within irssi after running $torify irssi [04:33] Math::BigInt: couldn't load specified math lib(s), fallback to Math::BigInt::FastCalc at /usr/local/share/perl/5.10.1/Crypt/DH.pm line 6 [04:33] [04:33] *** Irssi: Loaded script cap_sasl So I thought it was a CPAN module issue. cpan[1]> install Math::BigInt This was also done for FastCalc and retried with force install. What am I doing wrong? Thanks

  Read the article

• Black screen after grub kernal selection menu

  - by skip

  I have an Acer eMachines e727 with Intel GMA 4500M integrated graphics (drivers updated to latest). I installed Ubuntu 12.04 using Wubi. All is well until I select the kernal (first one on the list). My display goes black. I searched for solutions and found one on Unbuntu forum which partially helped. Following that sticky post, I pressed "e" at the kernal listings. I changed the $Linux... default line to "quiet splash nomodeset" and was able to get to the login screen and desktop. I edited grub to make the nomodeset permanent (also removed the vt command as recommended). I followed through with changing grub to match the graphics as recommended in the article using the grub cli (using info from vbeinfo). I updated grub with the recommended settings but still get the black screen after selecting the kernal. Only nomodeset works to get me to the login and desktop. Once I get to the desktop, my display resolution shows being set to 1024x768 but it actually looks like 800x680. What do I need to do to get past these issues? Thanks!

  Read the article

• keybinding issues with xmodmap across synergy

  - by Rick

  I've got two systems I use across Synergy. On the main one I have a normal keyboard that I swap caps lock and ctrl for. So I do: xmodmap -e 'keycode 66 = Control_L' xmodmap -e 'clear lock' xmodmap -e 'add Control = Control_L' Where keycode 66 is my caps lock key. The trouble is that I can't get this key to act as a control key on the other machine I connect to with synergy. The strange thing is that if I plug a keyboard into the machine, and run xev, the control key there is keycode 37. When I then hit my modified control key (keycode 66 on the master) it's registering as keycode 37 on the remote machine. So according to xev, it should be picking it up as a control keypress. Anyone have any hints on if Synergy is doing something overly helpful for me?

  Read the article

• How to use XDMCP+GDM and Xnest?

  - by João Pinto

  I have been trying to enable XDMCP on GDM without much success. Following some instructions I have edited /etc/gdm/custom.conf and added: [daemon] RemoteGreeter=/usr/lib/gdm/gdm-xdmcp-chooser-slave [xdmcp] Enable=true Then restarted gdm and tried to connect both locally and from a remote system with: Xnest :1 -query localhost Xnest :1 -query remote_system_hostname I just get a black screen instead of the GDM window as expected. I am missing something ?

  Read the article

• What installation size should i use?

  - by Patrick

  I am installing Ubuntu with the Windows installer, however I am using Windows 8. I need to know if there will be problems with installing it using Windows 8, and I need to know which installation size I should use........4gb....18gb....etc. Also, is it possible to actually install it on a usb drive? the option was available in the installation, but i was not sure if it was safe or not. I would really appreciate some answers.

  Read the article

• KVM swtitch , screen resolution problem

  - by Vagelism

  I use the lates ubuntu version. Till to day I use it with an acer trravelmate4070 and an LG screen in order to expand my destkop. Works great. Till today that I desided to connect my LG screen to a KVM switch in order to share the big screen with an other pc when I need it. In the KVM switch the resolution is lower and I can not manually change it. I read many solutions about making an .conf file but since I am new to Ubuntu I am afraid , more over I realized that these articles talk for the same problem but not as an expantion screen but as a main screen. Any idea how to config correct this file? I send the links of these articles here: http://robert.penz.name/219/workarou...-kvm-switches/ Where is the X.org config file? How do I configure X there? Thank you!

  Read the article

• How to enable services Discovery API in GoogleCL?

  - by Marcos

  There are bits and pieces of information all over the place but I'm trying to put it all together so that GoogleCL finally accesses more than the initial 7 services. Does anyone know of a step-by-step? Right now any attempt outside these result in the error message: google tasks list Did you specify the service correctly? Must be one of 'picasa', 'blogger', 'youtube', 'docs', 'contacts', 'calendar', 'finance' I installed GoogleCL from the Ubuntu repos, authenticated a few bundled services like contacts, docs etc. and those work great, giving me access to do certain operations like upload from the command line. I would really like to get it going to support tasks and all the other elegible Google services shown at https://code.google.com/apis/explorer/#_s=tasks Here are some guides/partial steps I've found: http://code.google.com/p/googlecl/wiki/DiscoveryManual (indicates needing to check it out updated GoogleCL from the subversion repository.) http://code.google.com/p/google-api-python-client/wiki/Installation easy_install --upgrade google-api-python-client http://code.google.com/p/googlecl/wiki/Install http://code.google.com/p/googlecl/source/checkout sudo -i cd /usr/local/src/ svn checkout http://googlecl.googlecode.com/svn/trunk/ googlecl-read-only cat googlecl-read-only/INSTALL.txt cd /usr/local/src/googlecl-read-only/ python setup.py install Result: $ google discovery list Traceback (most recent call last): File "/usr/bin/google", line 488, in run_interactive run_once(options, args) File "/usr/bin/google", line 540, in run_once options.config) File "/usr/bin/google", line 364, in import_service force_gdata_v1 = config.lazy_get(package.SECTION_HEADER, AttributeError: 'module' object has no attribute 'SECTION_HEADER'

  Read the article

• Corrupted 7z file

  - by KI4JGT

  I recently wanted to try out Fedora. So I transfered all my files to it via USB. Then I got frustrated with it, placed all my files in a 7z archive and then copied them back to the drive. Now, every time I try to open the archive, "an error occurred while loading the archive" Thanks for your help [edit] There is no password on the archive. ls -alF file.7z -rw-r--r-- 1 jesse jesse 2422670837 Nov 3 22:58 file.7z 7z t file.7z 7-Zip [64] 9.20 Copyright (c) 1999-2010 Igor Pavlov 2010-11-18 p7zip Version 9.20 (locale=en_US.UTF-8,Utf16=on,HugeFiles=on,4 CPUs) Processing archive: jesse.7z Error: Can not open file as archive $ 7z l file.7z | head -15 7-Zip [64] 9.20 Copyright (c) 1999-2010 Igor Pavlov 2010-11-18 p7zip Version 9.20 (locale=en_US.UTF-8,Utf16=on,HugeFiles=on,4 CPUs) Error: jesse.7z: Can not open file as archive Errors: 1

  Read the article

• How to mount an external Soundcard during startup?

  - by Moe

  I have an external sound card (Soundblaster XFi HD) connected to my Ubuntu 12.04 32-bit. that won't show up automatically after booting. After each boot process I need to plug the card out of the USB port and reconnect it, then it is found by the system and automatically used. I would like to either have it connected automatically during the boot process or at least have a little script or something which I can use after booting so that I don't have to manually plug the device off and on. Please note that I'm a total noob. If you don't mind please tell me the procedure step by step. Also, if I need to get some information via the terminal I'd need to be told the precise command to get it.

  Read the article

• Can mediatomb VLC profile transcode audio as MP3 rather than mpga ?

  - by djangofan

  In the /etc/mediatomb/config.xml, can mediatomb VLC profile transcode audo as MP3 rather than mpga ? My Sony GoogleTV wont render streamed .avi files files with a mpga audio in them. The original files are Divx encoded with 128kbs MP3 audio but mediatomb is transcoding them. How can I change this? Any ideas? Can I turn off the audio and video transcoding somehow? I need some ideas to try. <profile name="vlcprof" enabled="yes" type="external"> <mimetype>video/mpeg</mimetype> <agent command="vlc" arguments="-I dummy %in --sout #transcode{venc=ffmpeg,vcodec=mp2v,vb=4096,fps=25,aenc=ffmpeg,acodec=mpga,ab=192,samplerate=44100,channels=2}:standard{access=file,mux=ps,dst=%out} vlc:quit"/> <buffer size="10485760" chunk-size="131072" fill-size="2621440"/> <accept-url>yes</accept-url> <first-resource>yes</first-resource> </profile> I know that that MP3 encoding support is external to FFmpeg and must be configured appropriately, but I have no idea how to handle that. I would guess I can work around that by somehow telling ffmpeg to not transcode the audio stream? Also, should I create a separate vlcprof entry for video/avi ? Can you create more than one profile for VLC in the config.xml for mediatomb?

  Read the article

• How can I login to lightdm with password for fingerprint-enabled user after 12.10 upgrade?

  - by jxn

  Sorry for the long question. I have a laptop with ubuntu quantal 12.10, a fingerprint scanner, and a few active user accounts. When the machine boots up to lightdm, I get a prompt toenter my password or scan my finger print. Every now and then, fingerprint scanning just doesn't seem to work. Before the 12.10 upgrade, I was always able to enter my password for this user when fingerprint failed. Now, no matter what, I have to scan my prints to login as this user. If I try to login as a different user (fingerprint is not enabled for any others), I can see the password is typed out -- asterisks show in the password input box as I type them -- and get in. Not so for the fingerprint user. Any clues on how to figure out what's gone wrong?

  Read the article

• "isolinux.bin is missing or corrupt", when attempting to boot using disk in USB CD DRIVE

  - by Rodrigo Salazar

  I have an external CD drive which connects to USB. I burned 11.10 Ubuntu image to CD-R. The disk correctly shows me install page when I autoload disk within Windows 7. When I restart to attempt to boot from disk to install Ubuntu I get the following error for a split second before I continues to boot to Windows. "isolinux.bin is missing or corrupt". Clearly my computer knows that this is a Linux disk in the usb cd-drive...What went wrong? edit: I reburned another disk, same error

  Read the article

• problem in installing mysqlworkbench 6

  - by pavan

  Ubuntu 13.04 - 32 bit (Reading database ... 216964 files and directories currently installed.) Unpacking mysql-workbench-community (from mysql-workbench-community-6.0.6-1ubu1304-i386.deb) ... dpkg: error processing mysql-workbench-community-6.0.6-1ubu1304-i386.deb (--install): trying to overwrite '/usr/share/mysql-workbench/model_view.glade', which is also in package mysql-workbench-data 5.2.40+dfsg-2ubuntu1 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf-2.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Errors were encountered while processing: mysql-workbench-community-6.0.6-1ubu1304-i386.deb Please help..

  Read the article

• Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• Cannot enable wireless on an Intel WifiLink 1000 on an Lenovo Ideapad z570

  - by Brij

  I am using the ubuntu 11.10 on lenovo ideapad z570. My wireless internet is not working. I have ensure that wireless switch is on. Windows 7, wireless works great.However ubuntu 11.10 is not allowing me to enable wireless connection. I have run the following command and here is the status. sudo lshw -class network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:1c:a4:a4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:42 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: f0:de:f1:64:b6:62 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff Here is rfkill list all output: rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no Note : Windows 7, wireless card property shows that Intel WifiLink 1000 BGN. Could someone help me to fix this issue.

  Read the article

• Unable to install Inkscape on ubuntu 14.02

  - by Anum Khan

  Hi I am new to Linux Ubuntu 14.04. I wanted to install Inkscape but it has shown following error(Dependencies as it says): inkscape: Depends: python:any (>= 2.7.1-0ubuntu2) but it is a virtual package Depends: libaspell15 (>= 0.60.7~20110707) but 0.60.7~20110707-1ubuntu1 is to be installed Depends: libatkmm-1.6-1 (>= 2.22.1) but 2.22.7-2ubuntu1 is to be installed Depends: libc6 (>= 2.7) but 2.19-0ubuntu6.1 is to be installed Depends: libcairo2 (>= 1.10.0) but 1.13.0~20140204-0ubuntu1 is to be installed Depends: libcairomm-1.0-1 (>= 1.6.4) but 1.10.0-1ubuntu3 is to be installed Depends: libfontconfig1 (>= 2.9.0) but 2.11.0-0ubuntu4.1 is to be installed Depends: libfreetype6 (>= 2.2.1) but 2.5.2-1ubuntu2.2 is to be installed Depends: libgc1c2 (>= 1:7.2d) but 1:7.2d-5ubuntu2 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.9-20140406-0ubuntu1 is to be installed Depends: libgdk-pixbuf2.0-0 (>= 2.22.0) but 2.30.7-0ubuntu1 is to be installed Depends: libglib2.0-0 (>= 2.35.9) but 2.40.0-2 is to be installed Depends: libglibmm-2.4-1c2a (>= 2.36.2) but 2.39.93-0ubuntu1 is to be installed Depends: libgnomevfs2-0 (>= 1:2.17.90) but it is not going to be installed Depends: libgomp1 (>= 4.2.1) but 4.8.2-19ubuntu1 is to be installed Depends: libgsl0ldbl (>= 1.9) but it is not going to be installed Depends: libgtk2.0-0 (>= 2.24.0) but 2.24.23-0ubuntu1.1 is to be installed Depends: libgtkmm-2.4-1c2a (>= 1:2.24.0) but 1:2.24.4-1ubuntu1 is to be installed Depends: libgtkspell0 (>= 2.0.10) but it is not going to be installed Depends: liblcms2-2 (>= 2.2+git20110628) but 2.5-0ubuntu4 is to be installed Depends: libmagick++5 (>= 8:6.7.7.10) but it is not going to be installed Depends: libpango-1.0-0 (>= 1.14.0) but 1.36.3-1ubuntu1 is to be installed Depends: libpangocairo-1.0-0 (>= 1.14.0) but 1.36.3-1ubuntu1 is to be installed Depends: libpangoft2-1.0-0 (>= 1.14.0) but 1.36.3-1ubuntu1 is to be installed Depends: libpangomm-1.4-1 (>= 2.27.1) but 2.34.0-1ubuntu1 is to be installed Depends: libpng12-0 (>= 1.2.13-4) but 1.2.50-1ubuntu2 is to be installed Depends: libpopt0 (>= 1.14) but 1.16-8ubuntu1 is to be installed Depends: libsigc++-2.0-0c2a (>= 2.0.2) but 2.2.10-0.2ubuntu2 is to be installed Depends: libstdc++6 (>= 4.6) but 4.8.2-19ubuntu1 is to be installed Depends: libxml2 (>= 2.7.4) but 2.9.1+dfsg1-3ubuntu4.3 is to be installed Depends: libxslt1.1 (>= 1.1.25) but 1.1.28-2build1 is to be installed Depends: zlib1g (>= 1:1.1.4) but 1:1.2.8.dfsg-1ubuntu1 is to be installed What am I missing?

  Read the article

• error while installing openoffice

  - by Maulik Shah

  I was installing openoffice using these commands sudo add-apt-repository ppa:upubuntu-com/office sudo apt-get update sudo apt-get install openoffice Now after downloading some 20MB my internet connection interrupted when again it tried to install it says as follows Err http://ppa.launchpad.net/upubuntu-com/office/ubuntu/ precise/main openoffice amd64 3.4~precise Connection failed Failed to fetch http://ppa.launchpad.net/upubuntu-com/office/ubuntu/pool/main/o/openoffice/openoffice_3.4~precise_amd64.deb Connection failed E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? how to solve these errors ?

  Read the article

• Error while installing GNU Octave packages

  - by carllacan

  I want to install the GNU Octave optim package, but I keep receiving errors in the process. Apparently I need to install some other packages first, one of which is the general package. However, when I try to, I receive this error: octave:17> pkg install general-1.3.2.tar.gz make: /usr/bin/mkoctfile: Command not found make: *** [__exit__.oct] Error 127 'make' returned the following error: make: Entering directory `/tmp/oct-CGIPo9/general/src' /usr/bin/mkoctfile __exit__.cc make: Leaving directory `/tmp/oct-CGIPo9/general/src' error: called from `pkg>configure_make' in file /usr/share/octave/3.6.1/m/pkg/pkg.m near line 1391, column 9 error: called from: error: /usr/share/octave/3.6.1/m/pkg/pkg.m at line 834, column 5 error: /usr/share/octave/3.6.1/m/pkg/pkg.m at line 383, column 9

  Read the article

• USA keyboard layout keeps getting added on login

  - by Scott Severance

  I use the USA International keyboard layout. Every time I log in, the USA layout gets added to my list of layouts, which causes the keyboard layout indicator to be displayed. How can I stop the USA layout from being added? Additional info: I'm running Natty. Until recently, I had all four layout slots filled. Recently I changed from SCIM to iBus. With this change, I no longer need multiple layouts since iBus better handles my needs. So, I don't want both indicators (iBus and Keyboard layout) showing up.

  Read the article

• shotwell 0.12 shared library error

  - by blade19899

  i installed shotwell 0.12 like so via its official ppa sudo add-apt-repository ppa:yorba/ppa sudo apt-get update sudo apt-get install shotwell and when i tried to run it via dash it didn't start. i then typed in the gnome-terminal "shotwell" I then got this error error while loading shared libraries: libgexiv2.so.0: cannot open shared object file: No such file or directory my question is how to get shotwell 0.12 up and running in ubuntu 11.10 amd64

  Read the article

• ubuntu 12.10 not updating

  - by gunjan parashar

  i have upgrade to ubuntu 12.10 from ubuntu 12.04 after that it is not updating software updater gives the following error : W:Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://extras.ubuntu.com/ubuntu/dists/quantal/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-updates/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-backports/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-security/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-proposed/Release.gpg Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/restricted/source/Sources Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/main/source/Sources Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/multiverse/source/Sources Unable to connect to 10.4.42.15:8080: W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal/universe/source/Sources Unable to connect to 10.4.42.15:8080: : W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/quantal-proposed/universe/i18n/Translation-en Unable to connect to 10.4.42.15:8080: E:Some index files failed to download. They have been ignored, or old ones used instead. along with this i am not able to install any thing from software center , it just asks to use this source and after that it just keeps on quering software sources and nothing happens after that plz help me out , this 12.10 has became a great problem for me and forgive for my poor engish

  Read the article

• iPod is not visible to Banshee 1.5.0

  - by prule

  I have a brand new ipod nano, and if I plug it in to my media center running Ubuntu 9.10, it gets mounted and I can see it in Nautilus. Banshee, however, does not list it anywhere. Under preferences/extensions, I've checked that the ipod plugin is enabled. Rhythmbox could see it okay. I found some forums suggesting uninstalling Rythmbox might help, but it hasn't. Any other suggestions about why Banshee won't see it? Is the ipod too new? Thanks.

  Read the article

• error while loading shared libraries, file too short

  - by tommyk

  From one of my customers I got an application. When I try to run it I got following error error while loading shared libraries: ./libvtkWidgets.so.5.4: file too short In my project structure I see following: -rwxrwxrwx 1 tomasz tomasz 20 2011-02-01 10:44 libvtkWidgets.so -rwxrwxrwx 1 tomasz tomasz 22 2011-02-01 10:44 libvtkWidgets.so.5.4 -rwxrwxrwx 1 tomasz tomasz 2147103 2011-02-01 10:44 libvtkWidgets.so.5.4.2 Is my shared library libvtkWidgets corrupted ? How to solve that error ?

  Read the article

• How do you convert many files from .xlsx to .xls ?

  - by David Oneill

  What is a way to convert a batch of .xlsx files to .xls format? I would prefer it to be a command-line solution, but anything is better than opening each manually, and manually saving in the new format. ~~Edit~~ So is there a way to get around that error? errored: Leaking python objects bridged to UNO for reason pyuno runtime is not initialized, (the pyuno.bootstrap needs to be called before using any uno classes) python: tpp.c:63: __pthread_tpp_change_priority: Assertion `new_prio == -1 || (new_prio >= __sched_fifo_min_prio && new_prio <= __sched_fifo_max_prio)' failed. Aborted

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >