Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 117/1036 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• How to install Diablo 2 Lord of Destruction?

  - by user99666

  I first tried to install Diablo 2 LOD from an iso image using acetone iso. However, after acetone iso mounted the image, it said "Please install the labelled disc". I then tried with Gmount, and, following advice I received from some forums, I attempted to create mount points and then install; after it mounted the image, it installed the first three disc images but not the expansion. When I tried to play, it told me to insert the labelled disc, even though the iso image was still mounted with Gmount. How can I resolve this problem?

  Read the article

• Updating Nvidia drivers 11.10 (nvidia 290.xxx.xxx)

  - by Jesse

  Hi I installed NVIDIA drivers using terminal. I added the newest repositories, to ensure getting the newest driver, once that was complete, I ran the following command: sudo apt-get install nvidia-current This started the download and successfully installed the (290.xx.xxx) version. The issue I have is when opening X-server application it still shows NVIDIA driver version 173.14.30. Can someone walk me through correcting this so it corresponds to the driver installed? Thanks

  Read the article

• Black screen on login, can get thru decrypt disk and access command line but no GUI

  - by t3lf3c

  Running 12.04 64 bit fresh alternative install, with disk crypto on a new Lenovo laptop Install didn't connect and install modules, even though I had the network cable plugged in and don't have any whacky proxy settings. I had to manually install ubunut-desktop and define sources after initial installation, so this seemed a bit weird (ISO matched MD5 sum though) I unplug the network cable, otherwise I get a black screen that I can do nothing with. So I turn laptop on, I have disk encryption, I type in the password at the Ubuntu decryption GUI then get "set up successfully" message "Waiting for network configuration ..." then "Waiting for up to 60 more seconds for network configuration" At this stage (a) If I wait for it then I get a black screen that I can do nothing with. (b) If I interrupt the process by pressing escape, then I break through to the command line. From the command line, I can go ahead and login, then plug my network cable in to do apt-get commands. As a precaution I do some house keeping which takes a few mins to run: sudo apt-get update sudo apt-get upgrade Running startx to get to the GUI gives: Fatal server errror: no screens found The .Xauthority file is being created in my home directory but it's empty. I review my order and note the system graphics: Intel HD Graphics (WWAN or mSATA capable) So it's weird that I can't get to the Gnome. It looks like drivers aren't working. Is there a way of getting Intel drivers from the command line? Or do you have any other suggestions on what to try next?

  Read the article

• how to set different wallpapers in ubuntu workspaces

  - by Steve

  I'm having an issues trying to customize ubuntu workspaces in the gnome environment. Assuming the default four workspaces aka desktops, how can one have a different wallpaper for each one? When I go to an individual workspace to set its wallpaper, all of the workspaces use it. So if I set: wallpaper B on workspace 2 wallpaper C on workspace 3 What will happen is that all the workspaces will default to the last wallpaper set no matter which workspace it was set in. What's even weirder is that the very first wallpaper set upon using it for the very first time is what shows up when i call up the Workspaces tool. Even though once I settle upon a workspace, no matter which one, the original wallpaper disappears and the last wallpaper set is the one that always shows up.

  Read the article

• Bluetooth fix for Ubuntu 12.04, lenovo G580

  - by Sam Abraham

  Bluetooth not working, it shows turned on but manager indicated Bluetooth disabled. Uninstalled default manager and installed Blueman. The same with Blueman, clicking on connect to devices gets response 'adapters not found'. I've found many more people with the same problem. The fixes found in the archive don't work for me. I've tried a couple of things from the forum. I'm not familiar with computer hardware or software but have been using Ubuntu cause it saves me money, it's fairly easy to use and it does not tax my mid-range lap. Any help will be appreciated.

  Read the article

• Why are two indicator-network versions being worked on?

  - by Daniel Rodrigues

  Some months ago, on the road to Ubuntu Maverick, a new system indicator, network (with connman as a backend), started to be developed. The plan was to get it into UNE and release it with no notifcation area. Unfortunately it didn't make it into the final version. However, continued efforts are still being made to improve it, and I'm getting regular updates. From a blueprint from the last UDS, I read that the plan was to ship no notification area and only indicators. For that, it was defined that nm-applet (backend: NetworkManager) should be ported to the appindicator library. Today I discovered that those efforts are going on and a initial version is available for testing, available from Matt Trudel PPA (Natty only). So, my questions is, to whoever has the necessary info: wouldn't it be easier to join efforts and concentrate the work in just one version (probably NetworkManager backend, as that's the official plan), instead of breaking those efforts apart and hampering both testing and developing? Both indicators are being developed by Canonical engineers, and that really doesn't make much sense. So, any Canonical engineer willing to clarify this?

  Read the article

• How to display reboot required user notification after installing a custom package in linux?

  - by user284588

  After installing a custom package I should force a reboot of the system. I looked at couple of solutions to this use notify-send to display user notification followed by a reboot command, which did work as planned. But the user notification is only shown when I install the package from command line and not when I installed through Software Center. I came across some posts where they suggested adding the following to the postinst script [ -x /usr/share/update-notifier/notify-reboot-required ] && \ /usr/share/update-notifier/notify-reboot-required || true Tried including the above in the postinst script but all it does is updating the two files /var/run/reboot-required.pkgs and /var/run/reboot-required with restart information. It neither displayed user-notification nor rebooted the system after package is installed. Is there a way to display reboot required user notification in Ubuntu/Fedora/Open SUSE ?

  Read the article

• Problems after bumblebee installation

  - by Samuel

  I tried to install bumblebee on Ubuntu 12.04 LTS by following steps on ubuntuwiki site. But when i used this code: sudo add-apt-repository ppa:bumblebee/stable && sudo apt-get update this output came out: Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.q0zzLiXVT3 --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 46C0364A882F14F899448FFCB22A95F88110A93A gpg: requesting key 8110A93A from hkp server keyserver.ubuntu.com gpg: key 8110A93A: "Launchpad PPA for Bumlebee Project" not changed gpg: Total number processed: 1 gpg: unchanged: 1 E: Type 'ain' is not known on line 3 in source list /etc/apt/sources.list.d/bumblebee-stable-precise.list E: The list of sources could not be read. There´s also the same problem message when I try to run the update center. ´E:Type´ain´ is not known on line 3 in source list /etc/apt/sources.list.d/bumblebee-stable-precise.list, E:The list of sources could not be read., E:The package lists or status file could not be parsed or opened.´ I don´t know what to do since I´m a newbie at Linux. Thanks in advance, Samuel.

  Read the article

• Cannot boot from SD card/flash drive on Macbook Pro 13" - boot fails after purple screen

  - by user3512567

  It's my first time using Ubuntu and I have run into some problems. I have a 16GB USB Flash drive and 16GB SDHC Card. I would prefer to use the SD card but either will do just fine if it helps with the solution. I Have a 13" Macbook Pro with no hard drive deeming the machine useless without an OS. I thought I could substitute the hard drive for a 16GB SD card with an Ubuntu ISO on it. I would like to plug in my SD card into my Macbook Pro, boot the Ubuntu ISO and do simple things such as use the browser for internet. The Problem: Whenever I boot my Macbook pro with the SD card that has the Ubuntu ISO, it loads at the purple logo screen and does not function. How can I resolve this issue?

  Read the article

• Indicator-cpufreq does not work at 12.04 ¿infinite loop insaid?

  - by Juan

  Good night, i want to use indicator-cpufreq, but it is not possible, i think that when i start it, i get an infinite loop and it doesnt start I think i am doing it well, here you have a snapshoot when i try to start it http://i.stack.imgur.com/mvaYf.jpg But 6 or 7 minutes later, it continues at the same point, i have to stop it with Ctrl-c, and shows that: http://i.stack.imgur.com/Vi0pp.jpg It says:" Traceback (most recent call last): File "/usr/bin/indicator-cpufreq", line 82, in gtk.main() KeyboardInterrupt" I do not have idea of what do for fix that, i hope you can help me to do that Thanks for your time and sorry about my english

  Read the article

• Cannot add repository key

  - by William Anthony

  I just installed my new laptop with ubuntu 12.04 and when I'm trying to add key, there is a "network unreachable" error. william@ubuntu:~$ gpg --keyserver hkp://keys.gnupg.net --recv-keys 1C4CBDCDCD2EFD2A gpg: requesting key CD2EFD2A from hkp server keys.gnupg.net ?: keys.gnupg.net: Network is unreachable gpgkeys: HTTP fetch error 7: couldn't connect: Network is unreachable gpg: no valid OpenPGP data found. gpg: Total number processed: 0 I'm so sure the keyserver is not down, because I tried it again at my old laptop running ubuntu 11.04 william@william:~$ gpg --keyserver hkp://keys.gnupg.net --recv-keys 1C4CBDCDCD2EFD2A gpg: requesting key CD2EFD2A from hkp server keys.gnupg.net gpg: key CD2EFD2A: "Percona MySQL Development Team <[email protected]>" not changed gpg: Total number processed: 1 gpg: unchanged: 1 Is this a bug?

  Read the article

• Problems Dual Boot

  - by user104108

  A few months I decided to install Ubuntu 12.04 on my PC alongside with my Windows 7 partition. In order to do that and avoid any mistake, I followed the steps of these tutorial: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/2/ Everything was going well until I decided to update to the 12.10 realese. I don't know what happened, but after I updated my Ubuntu, it stoped working, it didn't even launched, when I turned on my pc and choose to run "Ubuntu 12.04" on the Grub Screen, a weird messaged appeared. Well, so I decided to install the Ubuntu 12.10 and forget about the 12.04 partition, no problem. I erased the partitions used for the Ubuntu 12.04 with EaseUS partition Manager. However, when I start my PC, there is still the option of "Ubuntu 12.04" to chose, is that bad? And what about now, can I use the Windows Installer of Ubuntu ( http://www.ubuntu.com/download/help/install-ubuntu-with-windows ) to install the Ubuntu 12.10 ? What should I do to have Ubuntu 12.10 and Windows 7 in dual boot again? Thanks; Thales.

  Read the article

• Antec Fusion Black LCD won't turn off on system shutdown

  - by Niklas

  Hi! I've been struggling a while with getting the iMON LCD/IR-receiver on my Antec Fusion Black case to shutdown together with the system (XBMC Live 10 - ubuntu based). But it won't. When it's turned off the LCD still lights up the whole room. Many have proposed the "solution" of setting the machine into hibernation instead but that however won't work for me, since I'm unable to suspend my system. It is the LCD/IR-module that prevents me from suspending and I haven't found a solution to properly unload it on suspending (it's way above my linux knowledge). I need help with getting the display to turn off the backlight when the system is turned off. Can anyone please help me? If anyone also has the knowledge on how to get the eject function to work on my Antec Veris rm200 remote I would be very grateful, I was told about that it could get fixed with irexec but I do not know how since I haven't been able to find a good tutorial on the subject. Thank you for helping me!

  Read the article

• mythbuntu 12 - lirc device doesn't appear to even exist

  - by FrustratedWithFormsDesigner

  I'm trying to get a new installation of Mythbuntu working. So far, everything is OK except the remote. The sensor for the remote is on my Hauppauge WinTV HVR 1250. First I tried to run irw to see what was being picked up by the sensor: $ irw connect: No such file or directory Then trying to run lircd gives: $ lircd start$ lircd start lircd: can't open or create /var/run/lirc/lircd.pid I look for any lirc devices and find there are none: $ ls /dev/li* ls: cannot access /dev/li*: No such file or directory Just to be sure, I check in /proc/bus/input/devices, which shows me two powerbuttons (not sure why), kbd and mouse dev, and the audio devs. Nothing for the IR receiver on the tuner card (which I thought was strange because shouldn't the tuner show up here?). $ cat /proc/bus/input/devices I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=PNP0C0C/button/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 U: Uniq= H: Handlers=kbd event0 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=LNXPWRBN/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 U: Uniq= H: Handlers=kbd event1 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input0 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/input/input2 U: Uniq= H: Handlers=sysrq kbd event2 B: PROP=0 B: EV=120013 B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe B: MSC=10 B: LED=7 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input1 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.1/input/input3 U: Uniq= H: Handlers=kbd mouse0 event3 B: PROP=0 B: EV=1f B: KEY=4837fff072ff32d bf54444600000000 70001 20c100b17c000 267bfad9415fed 9e168000004400 10000002 B: REL=143 B: ABS=100000000 B: MSC=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input4 U: Uniq= H: Handlers=event4 B: PROP=0 B: EV=21 B: SW=2000 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input5 U: Uniq= H: Handlers=event5 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Rear Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input6 U: Uniq= H: Handlers=event6 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Headphone" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input7 U: Uniq= H: Handlers=event7 B: PROP=0 B: EV=21 B: SW=4 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line-Out" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input8 U: Uniq= H: Handlers=event8 B: PROP=0 B: EV=21 B: SW=40 According to dmesg, the driver was registered, but it doesn't look like any devices was associated with the driver: $ dmesg | grep irc [ 10.631162] lirc_dev: IR Remote Control driver registered, major 249 So far, I've seen a number of forum pages suggesting that I use some trick to create a link between /dev/lirc and some other device that is the REAL IR sensor, like /dev/event5, but those cases assume that the real device is shown from /proc/bus/input/devices, and I don't see any such device there. Any suggestions on how to fix or further diagnose this?

  Read the article

• CMOTECH D-50 modem installation in Ubuntu 12.04

  - by Ricardo

  I have recently upgraded from 10.04 to 12.04. I had installed a 3G D-50 modem from CMOTECH. The program for Debian is provided by a Swedish company (ice.net). Usually after some mambo jambo of installung the libg++ libraries requested you can install it and runned in Ubuntu 8.04, 9.04, 10.04 and as far as I know in 11.04. When I upgraded and I click on the icon of ice.net it worked. However, I noticed that the usb D-50 modem was never mounted as usb and it didn't show up in the Lauchnpad or workspace (as when you plug a usb memory stick or another HD). I moved the icon from place in the launchpad and since when I click on the ice.net icon the same message appears: "please plug in your modem". The modem works (I've tested in Windows after this) and it blinks blue (sign that it works and picks up signal). If I type lsusb then I see that Ubuntu sees it on BUS address 006: Bus 006 Device 003: ID 16d8:6803 CMOTECH Co., Ltd. CNU-680 CDMA EV-DO modem I've tried wvdial without success. How can I get the D-50 usb modem mounted as in the previous versions of Ubuntu ?. Any help will be much appreciated. bests. Ricardo

  Read the article

• Firefox 4.0 Error [closed]

  - by Nik

  Possible Duplicate: Firefox crashes very often - Attempting to load the system libmoon Hi, I am running ubuntu 10.10 and installed firefox 4.0 beta 10 using the ppa:mozillateam/firefox-next, by running the command sudo apt-get install firefox-4.0. However whenever I try running it, it starts up and then within 2 seconds it crashes without any warning. I also don't get the usual warning whether to send the crash report to firefox or not. So I tried running firefox-4.0 using the terminal and I get the following the error message. Attempting to load the system libmoon Segmentation fault What do it mean? And what do I do to fix this error? I really want to try the latest firefox beta in ubuntu.

  Read the article

• Eclipse has multiple issues after JRE-6 (OpenJDK) upgrade

  - by Eusebius

  I'm on 12.04 LTS, and trying to use Eclipse Indigo. This morning Ubuntu made me update the following packages: Preparing to replace icedtea-6-jre-cacao 6b24-1.11.3-1ubuntu0.12.04.1 (using .../icedtea-6-jre-cacao_6b24-1.11.4-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement icedtea-6-jre-cacao ... Preparing to replace openjdk-6-jre-lib 6b24-1.11.3-1ubuntu0.12.04.1 (using .../openjdk-6-jre-lib_6b24-1.11.4-1ubuntu0.12.04.1_all.deb) ... Unpacking replacement openjdk-6-jre-lib ... Preparing to replace icedtea-6-jre-jamvm 6b24-1.11.3-1ubuntu0.12.04.1 (using .../icedtea-6-jre-jamvm_6b24-1.11.4-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement icedtea-6-jre-jamvm ... Preparing to replace openjdk-6-jre-headless 6b24-1.11.3-1ubuntu0.12.04.1 (using .../openjdk-6-jre-headless_6b24-1.11.4-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-6-jre-headless ... Preparing to replace openjdk-6-jre 6b24-1.11.3-1ubuntu0.12.04.1 (using .../openjdk-6-jre_6b24-1.11.4-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-6-jre ... After that (but I cannot swear it is the root cause), I have the following issues in Eclipse: When trying to launch the simplest HelloWorld program (which behaves fine with manual javac/java), I get either nothing or: An internal error occurred during: "Launching HelloWorld". org/eclipse/jdt/debug/core/JDIDebugModel I get an "Error log" tab in the console panel, with an error: Could not create the view: An unexpected exception was thrown. (Follows a consequent NullPointerException stacktrace between sun.util.calendar.ZoneInfoFile.getZoneIDs(ZoneInfoFile.java:785) and org.eclipse.equinox.launcher.Main.main(Main.java:1386)) When trying to access the Installed JREs part of the preferences, I get a popup saying: Unable to create the selected preference page. An error occurred while automatically activating bundle org.eclipse.jdt.debug.ui (162). And the preference tab says An error has occurred when creating this preference page. Until today I had a manually installed Eclipse (one of the official bundles available on their site), I've tried to replace it by the repository version and I get the same errors. What should I do to make Eclipse work again? Another person reports: Same happened to me after updating last night. Already tried reinstalling Eclipse and Java, starting Eclipse with -clean and starting new workspace and new .eclipse dir, but nothing helps.

  Read the article

• Ricoh Aficio 1515ps - How can I get the scanner to scan? (printing works)

  - by nutty about natty

  For similar screenshots and story, see: How to define my Samsung SCX3200 multifunction printer? and for a possible solution: How can I get an Epson TX560WD scanner working? Thanks! Edit n°1 installed xsane (via Ubuntu Software Center), launched it and get the following: Clicking on "Help" yields: I tried 4) man sane-dll which yields No manual entry for sane-dll I uninstalled "Simple Scan": didn't help. I tried 3) but aborted due to unsettling warning ;) wasn't that brave (or desperate). Maybe it's due to 1) and I'm stuck with it? Is it really not possible that a driver for either Windoze or Mac OS would also support scanning via Ubuntu? Edit n°2 Resorted to Windows XP and the Network TWAIN Driver ScanRouter or the "lite" version (which I found elsewhere) might also work (under Linux??); but it's more than I need. Thought about WINE, but also that seems to rely on SANE... So still no luck with this device's scanning capabilities with Linux (but good enough (via xp) for my purposes)...

  Read the article

• Can't recognize local webserver

  - by Syed Khalil-ur-Rehman

  My Internet Cable provider has set up a web server which hosts different entertainment material like movies, songs, tv shows and games etc. While using windows the pc recognises it as a local web server and downloads files with full LAN speed of 10 mb per second. On the contrary when using Ubuntu I am only able to download the files on my Internet speed not more than 100 kb per second. What ever I try ubuntu does not recognizes the webserver as a local area network web server but as a normal internet website. How to make Ubuntu download files from this server with full LAN speed. Please help in this regard. The url is http://dmasti.pk and yes it is a web server browsable by a web browser like firefox or ie.

  Read the article

• Why do I need lib64 on my 32 bit machine?

  - by Tim

  I am trying to install Oracle on my 32-bit machine that runs Ubuntu 10.4. I am following install Oracle on Ubuntu tutorial. At the very first step there is a requirement to manually install library libstdc++5. Author does 2 steps: download libstdc++5_3.3.6-17ubuntu1_amd64.deb from here download ia32-libs_2.7ubuntu6.1_amd64.deb from here As you may have probably noticed these 2 files contain an "_amd64" postfix, which pointed me out that author is using 64-bit amd processor. Each of these files author copied to /usr/lib64 and /usr/lib32 folders correspondingly and simply make soft links libstdc++.so.5 in both folders. Since I am running 32-bit machine I have simply downloaded those 2 files without "_amd64" postfix. Unexpectedly for me I have also found 2 lib folders in my /usr folder: /usr/lib64 and /usr/lib. So here is my problem: I do not understand which files and where do I have to copy: 1) Do I have to make the same steps as the author has done, i.e. download files with "_amd64" postfixes and place them in my /usr/lib64 and /usr/lib folders? 2) Or do I have to use libraries without "_amd64" postfix? And one more question: why do I have /usr/lib64 at all?

  Read the article

• hp pavilion g6 1250 wireless problems

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation , ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) there are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Debuild fails to make package for bluelog-1.04

  - by Dean Howell

  When trying to build a package for bluelog, Debuild give several errors. In the past, I've used checkinstall to quickly build crude packages. I am now trying to do it the right way and upload to a PPA. Bluelog can be found here: http://www.digifail.com/software/bluelog.shtml Here is the output from debuild; dpkg-buildpackage -rfakeroot -D -us -uc dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): -D_FORTIFY_SOURCE=2 dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions -Wl,-z,relro dpkg-buildpackage: source package bluelog dpkg-buildpackage: source version 1.0.4-0ubuntu1 dpkg-buildpackage: source changed by Dean Howell <dean@unknown> dpkg-source --before-build bluelog dpkg-buildpackage: host architecture amd64 fakeroot debian/rules clean dh clean dh_testdir dh_auto_clean make[1]: Entering directory `/home/dean/Launchpad Builds/bluelog/bluelog' rm -rf bluelog www/cgi-bin/* *.o *.txt *.log *.gz *.cgi make[1]: Leaving directory `/home/dean/Launchpad Builds/bluelog/bluelog' dh_clean dpkg-source -b bluelog dpkg-source: warning: Version number suggests Ubuntu changes, but Maintainer: does not have Ubuntu address dpkg-source: warning: Version number suggests Ubuntu changes, but there is no XSBC-Original-Maintainer field dpkg-source: info: using source format `3.0 (quilt)' dpkg-source: info: building bluelog using existing ./bluelog_1.0.4.orig.tar.gz dpkg-source: error: cannot represent change to bluelog/Builds/bluelog/bluelog/debian/bluelog/usr/bin/bluelog: binary file contents changed dpkg-source: error: add Builds/bluelog/bluelog/debian/bluelog/usr/bin/bluelog in debian/source/include-binaries if you want to store the modified binary in the debian tarball dpkg-source: error: unrepresentable changes to source dpkg-buildpackage: error: dpkg-source -b bluelog gave error exit status 2

  Read the article

• Log & monitor mysql databases on servers

  - by user3215

  How MySQL databases logged and monitored on ubuntu servers in real time?. I checked /var/log/mysql.log and found it empty. EDIT 1: The log was not enabled in the mysql configuration file. Now it logs and I could see the logs in the file /var/log/mysql/mysql.log But this could not be sufficient to gather additional information about the database logs. Is there any other way or any popular open source tool?

  Read the article

• How can I reinstall XRandR without serious disruption to 12.04?

  - by broiyan

  This is the sequence that leads to xrandr going missing: Installed 12.04 on a system with a motherboard using the Intel G45 chipset and the E8400 Core 2 Duo and AMD Radeon HD 5450 video card. Installed fglrx when ubuntu prompted via Additional Drivers. Ran Catalyst (Administrative) to select multi-desktop and rebooted. Ran Catalyst (Administrative) to select Xinerama and rebooted. Answer yes to about 3 prompts that request to send bug reports to ubuntu. At this point Settings > Appearances no longer offers the widget that allows you to resize the Unity Launcher icons. Also Settings > Displays says randr extension is not present. BTW: This same sequence is repeatable, including the issues with the missing icon resizer and xrandr, so there is clearly bug fixing potential here. How can I get xrandr reinstalled without un-installing a large set of dependencies? I realize that if I un-install xrandr I will have the chance to re-install but the number of dependencies is large and so an un-install will cause many systems to be un-installed and I am afraid that will ruin Ubuntu 12.04. Hence, I'm looking for a more direct fix. I thought rebooting the .ISO disk and reinstalling would be a good fix but obviously not since this problem is repeatable.

  Read the article

• How to escape spaces in .desktop files Exec line

  - by nh2

  I want to make a .desktop file like described here. [Desktop Entry] Name=Sublime Text 2 GenericName=Sublime Text 2 Comment=Edit text files Exec=/home/user/opt/sublime/Sublime Text 2/sublime_text %U However, running that from Nautilus's context menu using Open with this gives me Could not find '/home/user/opt/sublime/Sublime' So I tried Exec="/home/user/opt/sublime/Sublime Text 2/sublime_text" %U and got Text ended before matching quote was found for ". (The text was '"/home/user/opt/sublime/Sublime') What is the correct way to escape spaces in the Exec line of .desktop files?

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >