Search Results

Search found 4316 results on 173 pages for 'disabled'.

Page 125/173 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

  • Windows 8 freezes after every other reboot on Lenovo W520 after about 10 seconds

    - by John Nevermore
    I have a Lenovo W520 laptop with i7-2760QM, intel 520 SSD and Nvidia Quadro 1000m. When i boot the PC with discrete graphics SET in BIOS, the computer totally freezes and the only thing left to do is reboot. This only happens with NVidia drivers for Windows 8 x64 installed (I've tried about 4 different drivers on Nvidia's site). When i boot the PC with integrated graphics set in BIOS, there is a momentary "hickup" after about 10 seconds (instead of freezing) and then everything is working fine. When i boot the PC with discrete graphics ON and no Nvidia drivers installed, the same thing happens as described above with integrated graphics. I've tried doing 1) bcdedit /set disabledynamictick yes 2) Disabling VT-x in BIOS (Seriously would prefer not to disable it, since i use VM-s almost every day) but no dice. The only thing that worked was to enable the Hyper-v feature. I was then able to boot properly with discrete graphics and Nvidia drivers installed, but since i use VMWare for VM development this was no solution (VMWare complained about not being able to launch because of Hyper-v being installed). I followed the instructions in this tutorial, to be able to run VMWare. Then the computer just booted into a black screen past Windows logo. How to boot Windows 8 x64 without freezing with Quadro 1000M enabled, Nvidia Drivers installed and Hyper-v feature preferably disabled ?

    Read the article

  • IPMI sdr entity 8 (memory module) only showing 3 records?

    - by thinice
    I've got two Dell PE R710's - A has a single socket and 3 DIMMs in one bank B has both sockets and 6 (2 banks @ 3 DIMMs) filled The output from "ipmitool sdr entity 8" confuses me - according to the OpenIPMI documentation these are supposed to represent DIMM slots. Output from A (1 CPU, 3 DIMMS, 1 bank.): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 27 degrees C Temp | 0Bh | ns | 8.1 | Disabled Temp | 0Ch | ucr | 8.1 | 52 degrees C Output from B (2 CPUs, 3 DIMMS in both banks, 6 total): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 26 degrees C Temp | 0Bh | ok | 8.1 | 25 degrees C Temp | 0Ch | ucr | 8.1 | 51 degrees C Now, I'm starting to think this output isn't DIMMS themselves, but maybe a sensor for each bank and something else? (Otherwise, shouldn't I see 6 readings for the one with both banks active?) The CPU's aren't near 50 deg C, so I doubt the significantly higher reading is due to proximity - Is anyone able to explain what I'm seeing? Does the output from my ipmitool sdr entity 8 -v here on pastebin seem to hint at different sensors? The sensor naming conventions are poor - seems like a dell thing. Here is output from racadm racdump

    Read the article

  • MySQL taking a long time to start

    - by Dscoduc
    I'm running Windows Server 2008 with MySQL installed and every time I reboot the server the MySQL Service doesn't start right away. A look into the Windows Eventlog shows that the MySQL Service was hung at startup. Looking at the Services.msc console shows the service state at Starting... Eventually, like 10 minutes, the MySQL Service actually finishes the startup process and the database becomes available for my Wordpress server... I looked at the MySQL .err files and didn't find anything that would indicate a delay in the statup process... Can anyone suggest a way to determine what is causing the delay, and more importantly, how to prevent the delay in the MySQL Startup? UPDATE: Here is the .err log contents from the shutdown to the startup complete. Notice the startup begins at 10:30:00 and the MySQL isn't ready for connections until 10:47:14, a full 17 minutes later: 100322 10:27:06 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld: Normal shutdown 100322 10:27:06 [Note] Event Scheduler: Purging the queue. 0 events 100322 10:27:06 InnoDB: Starting shutdown... 100322 10:27:08 InnoDB: Shutdown completed; log sequence number 4 3854351346 100322 10:27:08 [Warning] Forcing shutdown of 1 plugins 100322 10:27:08 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld: Shutdown complete 100322 10:30:00 [Note] Plugin 'FEDERATED' is disabled. 100322 10:30:01 InnoDB: Started; log sequence number 4 3854351346 100322 10:47:14 [Note] Event Scheduler: Loaded 0 events 100322 10:47:14 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld: ready for connections. UPDATE 2: MySQL is configured as a service (part of the install process, nothing I did) and executes the following syntax (as it appears in the registry): "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --defaults-file="C:\Program Files\MySQL\MySQL Server 5.1\my.ini" MySQL

    Read the article

  • Windows product key is valid but wont activate

    - by pnongrata
    Last month, I needed to install Windows XP (Pro Version 2002 SP3) from a Reinstallation CD a co-worker gave me, and with a product key the IT team told me to use. Everything installed successfully and I have been using the XP machine for the last 30 days without any problems; however it kept reminding me to activate Windows, and of course, I never did (laziness). It now has me locked out of my machine and won't let me log in until I activate it. So I proceed to the Activation Screen which asks me: Do you want to activate Windows now? I choose "Yes, let's activate Windows over the Internet now.", and click the Next button. It now asks me: Do you want to register while you are activating Windows? I choose "No, I don't want to register now; let's just activate Windows.", and click the Next button. I now see the following screen: Notice how the title reads "Unauthorized product key", and how there are only 3 buttons: Telephone Remind me later Retry Please note that the Retry button is disabled until I enter the full product key that IT gave me, then it enables. However, at no point in time do I see a Next button, indicating that the product key was valid/successful. So instead, I just click the Retry button, and the screen refreshes, this time with a different title Incorrect product key Could something be wrong with the Windows XP reinstallation CD (do they "expire" after a certain amount of time, etc.)? Or is this the normal/typical workflow for what happens when you just have a bad product key? I ask because, after this happened I emailed IT and they supplied me whether several other product keys to try. But every time its the same result, same thing happening over again and again. So I guess it's possible that IT has given me several bad keys, but it's more likely something else is going on here. Any thoughts or ways to troubleshoot? Thanks in advance!

    Read the article

  • W2K INACCESSIBLE_BOOT_DEVICE, with System Commander

    - by Gary Kephart
    I have a system that was originally had Win NT. I added System Commander (SC7) and then added W2K. The relevant partitions are: 0 - Primary - MultiFAT (Has Win NT, mapped to C:) 1 - Extended - with many logical partitions: 1.1 NTFS which has W2K and is mapped to D: 1.2 other logical partitions which are irrelevant to this D: was getting full. It needed room for virus definitions and Windows upgrades. In the past, I had simple used SC7 to resize D: without problems. So I did it again this time. However, upon finishing, I got the message "Unable to create partition". It also marked the partition as unformatted. I checked that the files on the disk were still there using SC7's Partition Explorer, and they were there. I continued and the system managed to boot up fine anyways. Then I rebooted the system again. This time, I got a message saying "INACCESSIBLE_BOOT_DEVICE". I went back in to SC7 and to Partition Commander, and it was still saying that the partition was unformatted but the Partition Explorer still showed the files on the system. I finally decided to resize the partition again, figuring that this would force a rewrite of the partition information. That seemed to work, until I had to reboot again. Now I can't see the files using Partition Explorer, and the Resize button is now disabled. What now?

    Read the article

  • ping/ssh networking problem with server from 1 particular windows xp laptop

    - by user47650
    I am experiencing an odd problem with one specific server at my data centre connecting from my laptop. Basically the server is accessible from other machines in my house, but not from 1 particular laptop which is running windows XP. I have setup tcpdump on the server and wireshark on the laptop, and I can see ping echo request and reply packets that actually make it back to the wireshark on the laptop, but nothing shows in the ping console output like so; $ ping xxx.55.32.255 Pinging xxx.55.32.255 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for xxx.55.32.255: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), But I can see from the wireshark on my local laptop that the ping reply gets back... No. Time Source Destination Protocol Info 46 3.964474 192.168.1.64 xxx.55.32.255 ICMP Echo (ping) request Frame 46 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: Intel_31:d3:01 (00:19:d2:42:c3:01), Dst: ThomsonT_01:b8:2c (00:14:7f:02:b9:3c) Internet Protocol, Src: 192.168.1.64 (192.168.1.64), Dst: xxx.55.32.255 (xxx.55.32.255) Internet Control Message Protocol No. Time Source Destination Protocol Info 48 4.119060 xxx.55.32.255 192.168.1.64 ICMP Echo (ping) reply Frame 48 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: ThomsonT_01:b8:2c (00:14:7f:01:b8:2c), Dst: Intel_21:c3:01 (10:20:d2:31:c3:01) Internet Protocol, Src: xxx.55.32.255 (xxx.55.32.255), Dst: 192.168.1.64 (192.168.1.64) Internet Control Message Protocol obviously I have disabled the windows firewall and there is nothing in the windows event log. There is nothing else obviously strange about the server as it is the same build as other servers that I can connect to fine.

    Read the article

  • Why can't I install Java?

    - by Patrick
    I've been searching high and low for someone who can help me. I've been trying for a month. A month. to install Java on my new PC to no avail. No tech support forum can seem to help me. It all started while playing tekkit one day. I kept running out of memory (using the 32-bit JRE 7 u45) so I decided to install the 64-bit version. I uninstalled the 32-bit version first, for some reason, and downloaded the 64 bit runtime. In the installer, I go through all the normal screens until the installation progress bar appears. Then, it just sits there. No progress is made. No CPU is used by the installer, or any of its dependencies. The installer will stay like this for hours, days, and in one case a whole week without doing anything at all. I've tried installing older versions, the 32-bit version, even Java 6 and none of them will install. UAC is disabled, I've run regedit, CCleaner, and any other "fix-it" program there is. It's getting to the point where I may just have to wipe my hard drives and start over. I have several applications that require java, so this is an absolute necessity. Please, please, someone have the answer. Here are my system specs: -Intel i7-3770k -AsRock z77 Extreme3 -Samsung 840 pro SSD -WD Caviar Black 1tb

    Read the article

  • Help setting up a secondary authoritative DNS server.

    - by GLB03
    We have three Authoritative DNS servers and three recursive/caching DNS servers on my campus. Authoritative servers DNS1- Windows 2003 DNS2- Old Red Hat ----- Replacing w/ newer version DNS3- Windows 2008 (I installed) Caching and Recursive resolvers servers Server1- Windows 2003 Server2- CentOS 5.2 (I installed) Server3- CentOS 5.3 (I installed) I am replacing DNS2 with a newer Red Hat version, but have no documentation on how it was implemented. I have setup caching and windows authoritative servers, but not a linux secondary authoritative server. I have a perl script from the original server that pulls data from our DNS1 server. We use DJBDNS and TinyDNS on our linux servers. Our Network Engineer says the DNS2 server I am replacing is an authoritative server that doesn't need to be caching, but the only instructions I see is for an Authoritative server that does caching as well. Can someone point me in the right directions. I thought I was on the right track with using these instructions but when I query my new dns server I get "No response from server", I have temporarily disabled iptables to eliminate it from being an issue. ps -aux | grep dns avahi 3493 0.0 0.2 2600 1272 ? Ss Apr24 0:05 avahi-daemon: running [newdns2.local] root 5254 0.0 0.1 3920 680 pts/0 R+ 09:56 0:00 grep dns root 6451 0.0 0.0 1528 308 ? S Apr29 0:00 supervise tinydns dnslog 6454 0.0 0.0 1540 308 ? S Apr29 0:00 multilog t ./main tinydns 9269 0.0 0.0 1652 308 ? S Apr29 0:00 /usr/local/bin/tinydns

    Read the article

  • Windows 7 network performance tuning for LAN

    - by Hubert Kario
    I want to tune Windows 7 TCP stack for speed in a LAN environment. Bit of background info: I've got a Citrix XenServer set up with Windows 2008R2, Windows 7 and Debian Lenny with Citrix kernel, Windows machines have Tools installed the iperf server process is running on different host, also Debian Lenny. The servers are otherwise idle, tests were repeated few times to confirm results. While testing with iperf 2008R2 can achieve around 600-700Mbps with no tuning what so ever but I can't find any guide or set of parameters that will make Windows 7 achieve anything over 150Mbps with no change in TCP window size using -w parameter to iperf. I tried using netsh autotuining to disabled, experimental, normal and highlyrestricted - no change. Changing congestionprovider doesn't do anything, just as rss and chimney. Setting all the available settings to same values as on Windows 2008R2 host doesn't help. To summarize: Windows 2008R2 default settings: 600-700Mbps Debian, default settings: 600Mbps Windows 7 default settings: 120Mbps Windows 7 default, iperf -w 65536: 400-500Mbps While the missing 400Mbps in performance I blame on crappy Realtek NIC in the XenServer host (I can do ~980Mbps from my laptop to the iperf server) it doesn't explain why Windows 7 can't achieve good performance without manually tuning window size at the application level. So, how to tune Windows 7?

    Read the article

  • LSI MegaRAID LINUX got Optimal after degradation but strange POST message

    - by kesrut
    Linux server box with LSI MegaRAID controller got degraded. But after some time RAID status changed to Optimal. Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name : RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0 Size : 2.727 TB Mirror Data : 2.727 TB State : Optimal Strip Size : 256 KB Number Of Drives per span:2 Span Depth : 3 Default Cache Policy: WriteBack, ReadAdaptive, Cached, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Cached, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disk's Default Encryption Type : None Is VD Cached: No But now I'm getting RAID BIOS POST message: Your battery is either charging, bad or missing, and you have VDs configured for write-back mode. Because the battery is not currently usable, these VDs willl actually run in write-through mode until the battery is fully charged or replaced if it is bad or missing. (Image: http://cl.ly/image/1h1O093b1i2d) So may it be battery issue caused problem ? I get information about battery: BatteryType: iBBU Voltage: 4001 mV Current: 0 mA Temperature: 22 C Battery State : Operational BBU Firmware Status: Charging Status : None Voltage : OK Temperature : OK Learn Cycle Requested : No Learn Cycle Active : No Learn Cycle Status : OK Learn Cycle Timeout : No I2c Errors Detected : No Battery Pack Missing : No Battery Replacement required : No Remaining Capacity Low : No Periodic Learn Required : No Transparent Learn : No No space to cache offload : No Pack is about to fail & should be replaced : No Cache Offload premium feature required : No Module microcode update required : No Where can be problem ? I'm disabled alarms, but get them if enabled. But don't know how find root of problem.

    Read the article

  • No digital audio output with Asus Xonar DG

    - by Lunatik
    I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

    Read the article

  • Connection reset by peer: mod_fcgid: error reading data from FastCGI server Issues

    - by user145857
    Help is greatly needed for our server. We are experiencing random "Connection reset by peer: mod_fcgid: error reading data from FastCGI server" errors which cause a 500 internal server error. If the page is then reloaded it loads normally as it should. We are running MPM Worker with mod FCGID to handle PHP. We had APC cache enabled but disabled it recently to see if it would fix the problem, but the random mod FCGID errors are still continuing. No other opcode cache is active now. Our settings are below: <IfModule worker.c> MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 ThreadLimit 100 ServerLimit 700 MaxClients 700 MaxRequestsPerChild 0 </IfModule> <IfModule mod_fcgid.c> FcgidMaxRequestLen 1073741824 FcgidMaxRequestsPerProcess 2000 FcgidMaxProcessesPerClass 100 FcgidMinProcessesPerClass 0 FcgidConnectTimeout 300 FcgidIOTimeout 900 FcgidFixPathinfo 1 FcgidIdleTimeout 300 FcgidIdleScanInterval 120 FcgidBusyTimeout 300 FcgidBusyScanInterval 120 FcgidErrorScanInterval 12 FcgidZombieScanInterval 12 FcgidProcessLifeTime 3600 </IfModule> The server is a 64 core 2.1 GHZ 94 GB RAM so it has some power. Some of the fcgid timeout settings are higher because we run large reports which take up to 15 minutes. Any help is greatly appreciated! Just to clarify, the random fcgid errors are occurring when a user clicks a page on our site and the 500 error page loads instantly. This is random and occurrs less than 1% of the time but it is still an issue.

    Read the article

  • How do I configure nVidia drivers on a Portable Ubuntu setup?

    - by Nicholas Flynt
    I've been pulling my hair out over this one for a couple of days now, google is no help. I've created a wonderful (until this issue) portable copy of Ubuntu linux that will boot on mostly anything by using a USB enclosure for my laptop's 80GB SATA drive. So far so good, it boots and runs on everything, and on non-nVidia card setups was even detecting the drivers, or letting me install the required drivers for hardware acceleration and compiz. Because you know, the wobble windows are the most awesome thing ever. Anyway, my desktop machine had an nVidia card, so I'm thinking, sure, I'll just install the nVidia drivers like before and everything will work happily. Not so-- now the desktop and any other nVidia cards work great, but it seems to have completely disabled any other graphics cards. When the kernel module detects that an nVidia card isn't present, it shoots up this nasty little dialog box giving me the option to boot into "low graphics" mode, which doesn't even allow me to use the correct screen resolution, much less see the installed graphics card and try to configure a driver for it. Is there any way to configure Ubuntu (with the dreaded nVidia kernel module) so that it can use nVidia's drivers when an nVidia card is present, and default to the normal (not low-graphics) setup in other cases, so that it has a fair chance of using what's actually present? I'm not afraid to much with config files, I just don't know the underlying system well enough to feel comfortable diving in without a push in the right direction. Thanks guys!

    Read the article

  • Explorer.exe not starting after login on Windows Server 2003 (Terminal Services and console)

    - by Pepperoni Icecream
    When users login to a Windows Server 2003 R2 running Terminal Services they have a blank desktop. Upon inspection, explorer.exe is not running. When I login as administrator, using either RDP or to the console, I am having the same issue. I can pull up the taskman and start explorer.exe manually. I have another Terminal Server setup exactly the same way (same apps, settings, GPO, etc . . .) the only difference is we deployed Symantec Endpoint Client 11.0.5 on Friday. For some reason the working Terminal Server is still on 11.0.4, but the suspect server received the 11.0.5 client upgrade. I checked the eventviewer for any relevant explorer.exe entries to no avail. It seems that if SEP is preventing explorer.exe from starting at login it would do the same for the domain admin starting explorer.exe from the taskman. I disabled the SEP client and services on the server and issued smc -stop and tried logging in again. Still no explorer.exe. So I'm not sure if the client upgrade is relevant but it is worth mentioning since that was the last system change. The 2 servers are members of a NLB group. I took the bad terminal server out of the group until the issue is resolved. Actually stopped the host using NLB manager Any help is appreciated.

    Read the article

  • Uninstall IIS on Windows 7

    - by CJM
    I've just rebuilt my development machine and installed IIS. I then installed the Web Deployment tool and used this to restore my previously-backed-up websites to the clean machine. Unfortunately the restoration didn't work correctly/fully. I couldn't easily correct the problem, so I decided to uninstall/reinstall IIS and recreate the sites manually. I uninstalled IIS and rebooted, but there was still plenty of stuff left around such as various files in /windows/system32/inetsrv/ which I tried to delete manually (with limited success!). I rebooted again and tried to reinstall IIS - it reported an error (no meaningful message) and requested another reboot. The event log includes the following errors: The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/gallery for site 1. The site has been disabled. and Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. I'd like to avoid another rebuild. Can I completely remove IIS, such that I can reinstall it from scratch? Or can I 'fix' the current setup so that IIS will reinstall over what is already there?

    Read the article

  • Server 2008 NAT Internet Not Working

    - by Jack
    I'm trying to set up Routing and Remote Access on Windows Server 2008 R2, I have a network connection that I want to share the internet from to another private network. The server has two NICs which are configured as follows: External NIC (Dynamically assigned by ISP) IP:10.175.4.150 Subnet:255.255.192.0 Gateway:10.175.0.1 DNS:10.175.0.1 Internal NIC IP:172.16.254.1 Subnet:255.255.255.0 Gateway:None DNS:None I have set the external NIC to be the public interface and enabled NAT on it in the RRAS MMC and set the internal NIC to be a private interface. I have also set up the DNS forwarding or whatever it is in the NAT section. From a client (IP:172.16.254.2) I can ping the server and access files on it, when I try to browse the web with the default gateway set to the internal NIC ip I end up getting a 404 page which is returned from the ISPs default gateway. I'm guessing it's something to do with the double NAT possibly. Trying to ping the ISPs default gateway from a private network client just times out as does accessing it directly. I've disabled and reconfigured RRAS multiple times and that doesn't seem to have made a difference, so can anyone tell me what I'm doing wrong? Thanks.

    Read the article

  • Eclipse: Slow startup time

    - by ct2k7
    Hello, I've got Eclipse 3.6.1 on my MacBook Air (2010), and I'm getting slowish startup times. Well, slow, compared to my Desktop, which is somewhat less powerful and a few years old). The startup generally takes 15 seconds, and of this, 4 is spent just on the Eclipse splash screen, before Eclipse loads anything. No projects are open at startup. Here's a copy of my eclipse.ini. -startup ../../../plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar --launcher.library ../../../plugins/org.eclipse.equinox.launcher.cocoa.macosx.x86_64_1.1.1.R36x_v20100810 -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Xms256m -Xmx512m -Xdock:icon=../Resources/Eclipse.icns -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -Dosgi.requiredJavaVersion=1.6 -Xverify:none -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled -XX:+UnlockExperimentalVMOptions -XX:+AggressiveOpts -XX:+StringCache -XX:+UseFastAccessorMethods -XX:+UseLargePages -XX:LargePageSizeInBytes=4m -XX:AllocatePrefetchLines=1 -XX:AllocatePrefetchStyle=1 -Dide.gc=true The problem doesn't seem to be related to plugins - I've disabled the ones which I don't need, and regardless of this configuration or whether all of them are selected on startup, it only takes 1second to load the plugins. I'm running Eclipse 3.6.1 Cocoa x64 build (vanilla) with the Zend Studio plugin. The machine has 4GB RAM, an SSD with over 64% free space, 1.6GHz (4MB L2 Cache). OS is Mac OS X 10.6.6, latest Java available, 1.6. For comparison, my Desktop, an old P4 3GHZ (512K L2 Cache) with a 7200RPM drive, under 40% free space, Eclipse (same config) loads in under 7 seconds, consistently. Note, this one is a Windows machine, with latest Java installed.

    Read the article

  • No digital audio output with Asus Xonar DG

    - by Lunatik
    I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

    Read the article

  • uWSGI cannot find "application" using Flask and Virtualenv

    - by skyler
    Using uWSGI to serve a simple wsgi app, (a simple "Hello, World") my configuration works, but when I try to run a Flask app, I get this in uWSGI's error logs: current working directory: /opt/python-env/coefficient/lib/python2.6/site-packages writing pidfile to /var/run/uwsgi.pid detected binary path: /opt/uwsgi/uwsgi setuid() to 497 your memory page size is 4096 bytes detected max file descriptor number: 1024 lock engine: pthread robust mutexes uwsgi socket 0 bound to TCP address 127.0.0.1:3031 fd 3 Python version: 2.6.6 (r266:84292, Jun 18 2012, 14:18:47) [GCC 4.4.6 20110731 (Red Hat 4.4.6-3)] Set PythonHome to /opt/python-env/coefficient/ *** Python threads support is disabled. You can enable it with --enable-threads *** Python main interpreter initialized at 0xbed3b0 your server socket listen backlog is limited to 100 connections *** Operational MODE: single process *** added /opt/python-env/coefficient/lib/python2.6/site-packages/ to pythonpath. unable to find "application" callable in file /var/www/coefficient/flask.py unable to load app 0 (mountpoint='') (callable not found or import error) *** no app loaded. going in full dynamic mode *** *** uWSGI is running in multiple interpreter mode ***` Note in particular this part of the log: unable to find "application" callable in file /var/www/coefficient/flask.py unable to load app 0 (mountpoint='') (callable not found or import error) **no app loaded. going in full dynamic mode** This is my Flask app: from flask import Flask app = Flask(__name__) @app.route("/") def hello(): return "Hello, World, from Flask!" Before I added my Virtualenv's pythonpath to my configuration file, I was getting an ImportError for Flask. I solved this though, I believe (I'm not receiving errors about it anymore) and here is my complete configuration file: uwsgi: #socket: /tmp/uwsgi.sock socket: 127.0.0.1:3031 daemonize: /var/log/uwsgi.log pidfile: /var/run/uwsgi.pid master: true vacuum: true #wsgi-file: /var/www/coefficient/coefficient.py wsgi-file: /var/www/coefficient/flask.py processes: 1 virtualenv: /opt/python-env/coefficient/ pythonpath: /opt/python-env/coefficient/lib/python2.6/site-packages This is how I start uWSGI, from an rc script: /opt/uwsgi/uwsgi --yaml /etc/uwsgi/conf.yaml --uid uwsgi And if I try to view the Flask program in a browser, I get this: **uWSGI Error** Python application not found Any help is appreciated.

    Read the article

  • Windows xp recovery console without Ntfs.sys? (0x00000024 BSOD)

    - by Kalle
    I have two physical disks in a computer, for simlicity lets call them C and D. C: got Windows XP and D: got some data. The problem is that whenever i have D: connected i can't boot windows. I get some BSOD called 0x00000024/NTFS_FILE_SYSTEM. Same thing if i boot up windows with D: disconnected and then connect it once windows has loaded. The KB article about this problem says that i have to run chkdsk but i can't get to somewhere where i can run this because i get a BSOD whenever the disk is connected! Even the recovery-console BSODs if D: is connected. The final option in the KB is to boot the computer on Windows 2000 Setup disks where you edit some file to manually disable the ntfs.sys driver and then run chkdsk. The problem is that i don't have any floppy drive. Is there any way to boot the built in recovery console with ntfs.sys disabled or to burn the floppy version to a cd after you've extracted and modified it on the harddrive? Right now the Windows xp bootable floppy creator(2) is asking me which floppy drive to extract to which i can't answer because i have none :/ Other solutions to the root problem is also appreciated :) (2) ht tp://www.microsoft.com/downloads/details.aspx?FamilyID=55820edb-5039-4955-bcb7-4fed408ea73f&displaylang=en

    Read the article

  • SATA HDD stuttering on reads (LED on)

    - by jdehaan
    I hope I can get some new ideas to solve the issue. What I have: AMD Phenom II X4 905e Box, Sockel AM3 Gigabyte GA-MA790XTA-UD4, AMD 790X, AM3 ATX WD Caviar GreenPower 1,5TB SATA II 4GB Kit OCZ DDR3 PC3-10666 Platinum Low-Voltage CL7 HIS HD 4670 iSilence4 DDR3 1024MB Native HDMI Dual-DVI, PCI-Express Behavior: Everything works normally excepting the HDD accesses. The drive seems to get stuck in reading data (LED drive by Mainboard is on for a while) then recovers and goes on. There is a delay of more than 30s sometimes. Often it is a matter of 5-10s. This does not seem related to the workload of the disk. What I tried so far: Use different SATA port: I switched from the SATA3 to SATA2 then the SATA driven by the CPU, no difference. Turned AHCI off, drove the SATA in IDE mode, same behavior, now I felt like the HDD has problems Deactivated energy saving settings (BeQuiet, ...), disabled 3 CPUs (msconfig) supposing some race condition or trouble with changing freqs, same trouble With Windows7 Professional 64Bit, I installed the hotfix http://support.microsoft.com/?scid=kb%3Ben-us%3B976418&x=8&y=9 with no success. The problem description matches what I experienced, so I felt lucky but was quite in a sad mood after being deceived. Burned the DLG 5.04f DataLifeGuard CD from WD to check the drive. All tests passed, to my surprise! Installed an Ubuntu on the same drive i386 flavour. Drive still in IDE mode, exactly the same behavior. So the OS does not matter. What I did not try yet: http://www.gigabyte.eu/Support/Motherboard/BIOS_Model.aspx?ProductID=3263 I have a F2 BIOS and there is a F3a Beta, did someone have similar issues that were solved by this update? It is a beta so I fear upgrading a bit and I could find no release notes at all on the net, not really serious work maybe they had issues translating from Chinese??? Using another HDD drive Does someone have other hints or a similar issue? Maybe it is neither the HDD nor the Mainboard/BIOS?

    Read the article

  • another "SSH connect to host github.com port 22: Bad file number"

    - by Mariusz
    Hello. I have a problem with my first-time ssh connection. Yes, I've already done yours guides, already tried your "Dealing with firewalls and proxies" article and the problem is still occuring. I am using Win7 32bit, Windows Firewall is disabled, haven't any third-party firewalls, ESET Nod32 Antivirus is not blocking any ports, I am not using any PROXY (neither local proxy) . Here goes the logs: Ordinary SSH connection try C:\Users\Mariusz>ssh -vvv [email protected] OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug2: ssh_connect: needpriv 0 debug1: Connecting to github.com [207.97.227.239] port 22. debug1: connect to address 207.97.227.239 port 22: Not owner ssh: connect to host github.com port 22: Bad file number NCAT connection try C:\Users\Mariusz>ncat github.com 22 Strange connect error from 207.97.227.239 (10013): No error 10013 = WSAEACCES I think that method called "smart-http-support" won't be usable for me because I haven't created repo yet. I have just GIT INIT locally, and finished at step GIT PUSH, which returns the same: ssh: connect to host github.com port 22: Bad file number fatal: The remote end hung up unexpectedly corkscrew method (first article from yours guide) . While PUTTYing (with pageant in bg), after inputing login - an error is occuring (MessageBox): Disconnected: No supported authentication methods available And in terminal such message is printing out: Server refused our key Key I have generated correctly, using ssh-keygen. I tried not method by editing ~/.ssh/config yet because I had thought that because I haven't PUSHed anything to my remote repo so I won't be able to CLONE anything. Method called ssh-forwarding is not for my, cause it "requires access to an external ssh server" and I haven't any at this time. What else could I do? Thanks in advance for any help. Mariusz.

    Read the article

  • FreeBSD slow transfers - RFC 1323 scaling issue?

    - by Trey
    I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

    Read the article

  • Toshiba External Hard Drive freezes computer

    - by Ephraim
    I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

    Read the article

  • Authenticated User Impersonation in Classic ASP under IIS7

    - by user52663
    I've recently moved one of our servers from Server 2003 and IIS6 to Server 2008 R2 and IIS7 (technically IIS7.5 I suppose). In doing so I am transitioning a small account management tool written in classic ASP and have run into a problem with user impersonation. Extensive searching hasn't been much help so far. Under IIS6, the site was configured to impersonate the logged-in user. Thus, if a domain admin logged in, he was able to run commands to create user directories, adjust permissions, etc. Using Procmon you can see the processes executing as that user. This worked fine. However, with the same code under IIS7, I am unable to get this behavior. I have enabled Basic Authentication, disabled Anonymous Auth, enabled impersonation and have changed the app pool to classic instead of integrated pipelining. Everything seems to be configured correctly, however, all the processes launched by the classic ASP site continue to run as the default AppPool identity and not the logged-in user. If it matters, programs are being launched with code such as: set Wsh = Server.CreateObject("WScript.Shell") Wsh.Run("cmd.exe /C mkdir D:\users\foo") Monitoring via Procmon shows cmd.exe being run as either "Classic .NET AppPool" or "DefaultAppPool" depending on the pipeline mode. Any suggestions on how to get the classic ASP site to impersonate and execute as the authenticated user would be great. Thanks!

    Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >