Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 127/170 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• How to take a copy of wubi ubuntu system as it is?

  - by rajat

  I have installed ubuntu (as a dual boot) using wubi (Windows-based UBuntu Installer) installer for windows, and have been working in linux since then. Now that I have many projects with many dependencies, I'd want to install the same ubuntu to other machines, so that I don't need to install Ubuntu first, and then each and every project and it's dependencies. There is a folder called ubuntu in my windows drive, which was created by wubi and which contains all the ubuntu stuff. Other machines have only windows 7 installed and have the same configuration. Is there any way to install the save ubuntu I am using to the other machines ?

  Read the article

• What is the specific advantage of a blade server for virtualisation?

  - by ChrisZZ

  We are planning to implement a VDI Solution. We had some discussions about Blade vs Rack. As we are only planning to implement 75-100 Clients, we calculated, that we would need 2 Servers with Dual 8C Processors - and a shared storage server. This calculation is based on a paper by ORACLE, that says, 12 active virtual machines per core. Now, for buying to servers, a blade does not scale financially. But the Blade has some other advantages: a) The interconnectivity between the blades is super-fast. b) IO Virtualisation Are there other advantages, that we should consider, that would make up for price - and are this advantages so important, that we should think about investing in the blade?

  Read the article

• HD read error while booting linux

  - by sidharth sharma

  I have been dual booting windows 7 and ubuntu on my laptop since the past 3 years and all was working fine until I started getting logs like ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense key: Medium Error [Current][discreptor] I figured it was a hardware problem and ignored it as long as I could until the HD crashed on me. Then I got a brand new HD and put on windows and ubuntu afresh on it but the problem still persists. Any Help?

  Read the article

• Adobe Reader - Content Preparation progress

  - by kubal5003

  Hello, I was wondering recently if is it just me or anyone else noticed it: why Adobe Reader after opening every single document displays "Content preparation" window with progress bar and it lasts for ages.. ? On linux pdf readers work hell lot better (faster), on windows other readers also work faster. Some years back in the past Adobe Reader also used to be quick. What has happened? PDF files aren't bigger/more complex compared to 3-4 years ago. Computers are at least dual core and with much more ram and displaying pdf files is getting slower and slower..

  Read the article

• Problem reinstalling GRUB

  - by DisgruntledGoat

  I have a PC that dual-boots Ubuntu and Windows Vista. I recently reinstalled Windows Vista after some problems and now the bootloader's gone. I've been trying to follow this Ubuntu community guide but it's not working. I have Grub Legacy according to the first part (I installed Ubuntu 9.04 originally then upgraded). From the 9.04 LiveCD, I ran this: sudo grub-install --root-directory=/media/disk /dev/sda5 sda5 is the Ubuntu partition. I get this output: grub-probe: error: Cannot open `/boot/grub/device.map` [: 494: =: unexpected operator Installing GRUB to /dev/sda5 as (hd0,4)... Installation finished.No errors reported. This is the contents...(etc) (hd0) /dev/sda In the bit below, when I run setup (hd0) I get an error, "Error 17: Cannot mount selected partition" Little help?

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Need Boxee/Vista remote control recommendations

  - by gurun8

  I have an Acer Aspire X1200 (specs link below) desktop computer that I've installed Boxee on and it works great. And it looks like it's going to be a perfect computer for a media player. It's small with lots of hard drive space and even has a HDMI output on it. http://support.acer.com/acerpanam/desktop/0000/Acer/AspireX1200/AspireX1200sp2.shtml I also have a Harmony® 880 Advanced Universal Remote (specs link below) that I'd like to use with the Acer computer. www.logitech.com/en-us/440/372 My thought is that I need to get a USB remote control adapter, right? So I did a quick Google search and found products from $5 to hundreds of $$$. Does anyone have recommendations? Things you like/dislike about certain remotes? This Acer is running Vista and has a AMD LIVE!: Athlon X2 dual-core processor. 64 bit some times makes it a little more difficult. Thanks for the help.

  Read the article

• Cable installed - now my hub has no connection the router/modem - what do I need to buy?

  - by bcmcfc

  My previous setup was as follows: [modem/router]------[switch]+------ [pc1] +------ [pc2] I've just moved and had cable installed and I no longer have the option of running a lengthy LAN cable from the router to the switch to provide network and internet access to the two PCs. The cable company provided 2 wireless N USB adapters. What do I need to buy to plug into where in order to restore the network to its previous state? PC1 dual boots Windows 7 and Ubuntu 12. PC2 runs Debian 6. Edit: USB adapters - Netgear WNDA3200 Switch - TP-Link TL-SF1008D 8 port Ethernet switch Cabling - various patch cables cat5e rj45 Modem/Router - pretty standard cable company job - wireless Intention is something like- [modem/router] --wifi-- [some-new-hardware or perhaps to pc1] ----[switch]---[pc1/2]

  Read the article

• Function key emulator for Dell inspiron 6400 on external keyboard

  - by hardik988

  I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

  Read the article

• Preventing SSH RSA host key warnings for change of key vs IP address

  - by Adam M-W

  I have a network with DHCP enabled, and also a computer that dual boots operating systems and has different SSH keys on each (and yes, I would like to keep different keys on each rather than copying the same identity/private key to each). Because the IP address does not change between operating systems because the MAC address is the same, when connecting to ssh, even when not using the IP address but the hostname via DNS/mDNS, I get the warning: Warning: the RSA host key for 'hostname' differs from the key for the IP address '192.168.1.172' Offending key for IP in /Users/user/.ssh/known_hosts:37 Matching host key in /Users/user/.ssh/known_hosts:38 Are you sure you want to continue connecting (yes/no)? How can I surpress the warning when the hostname differs from the IP address for that hostname, but retain the ability to check host keys are the same for each hostname? (each OS has a unique hostname)

  Read the article

• Strange sound from Laptop, Microphone, Speakers or Soundcard?

  - by David Schilling

  I have recently purchased a second hand computer. There didn't seem to be anything wrong with it on purchasing, however recently I have noticed a small issue. Any time I play sound or listen through my headphones, I can hear what seems to be the CPU working (ie when beginning a new task, there is a small crackling). Also if I tap my laptop I can hear the sound louder, as if it is being picked up by the mic and then playing that sound in real time through the speakers or headphones. I have tried reading other topics but cannot find an answer to this question. These are the specs I am running on; Windows 7 Home Premium 32bit Pentium Dual Core CPU T4300 @ 2.10Ghz 2.10Ghz I hope someone can help me with this issue, it would be much appreciated.

  Read the article

• Lock Windows keyboard and mouse but still display screen normally

  - by Stephen Lacy

  I'm using windows 7, I have a dual monitor display. It displays important information related to the business, I'd rather that random users that walk in can't just walk over to it and start using the computer with the same access rights as the user the monitoring software is running as. What I would like is if any time someone presses a button on the keyboard including alt-ctrl-delete all that would appear is a dialog asking for a password. Then I can click cancel and it will return to showing the data I want displayed. ClearLock doesn't work I tried it btw

  Read the article

• Server 2008 R2 Datacenter (and all other version) not detecting hardware

  - by Mitchell Skurnik

  I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

  Read the article

• Help me understand how Xen vCPU/CPU works

  - by luckytaxi

  Say I have a Dual-Core server, that's 4 cores w/ two physical processors. I read numerous articles that states the dom0 should get one physical core to itself. By core, does that mean a single CPU core or one of the 4 logical cores? Ideally I would like to dedicate a single CPU core (2 logical) to the dom0. Then I would give the other CPU split between the 3 VMs. I've seen examples where ppl would assign more than the available number of cores to a VM and I don't know what good that would do. I mean, why would I want to assign 4 vCPU to a single VM when I only have 2 available (if my math is correct)? I assume I only have 2 available from the one core as I've given dom0 a CPU to itself.

  Read the article

• Window Server 2003 Print spooler

  - by mikenardone

  Hello Everyone in ServerFault, I am new to this website. I have been coming here to fix my own problems. I believe everyone here on this website is great. I could not find this issue anywhere. I am sure that other people had this issue. I have IBM X3850 48GB ram 2 TB of hard drives, four NIC cards. 2 Xeon 1.7 CPU. I am running VMware ESX. I believe that was the paid version if not then it is ESXI. I have 7 Servers on this server. All Window server 2003. On one of the Servers I keep on getting CPU is at 100% . So when I go into task manager and look at the processes that is going on, it is my print spooler. I have 30 different HP laserjet printers and two copiers from HP. I believe it is an driver issue, but I can't figure with one is doing this. Is there any programs for window server 2003 that finds bad print drivers.

  Read the article

• Macbook superdrive got calibration problems

  - by Fractal

  I have an intel macbook dual 2Ghz, bought about three years ago. I've had some problems with the superdrive and changed it a year and a half ago. the drive is Matshita DVD-R UJ 857 now I'm into burning cd's again and try to burn a DVD with Toast Titanium from an .iso on my hard drive But it won't work. When I launch the burn, the disc suddenly stops turning, and an error log pops: medium error, sense code = 0x73, 0x03 then I try with the built in cd burner of the macbook as soon as I click burn, the cd stops turning in the drive, and error log says peripheral couldn't calibrate power of the laser required for medium so since I'm not that logical of a geek, I try my first idea: let's see with other brands of DVD! the problem is that it works, now. but I'd like for all of my medium to be usable, and I've already seen my ridata DVD being burn, so here's the question. What the hell is happening with my superdrive? :)

  Read the article

• What is a good router linux distro and WHY?

  - by madmaze

  I have a rather large home network with many clients. Ive decided I want to build a Linux based router, I have an 1.6Ghz dual-core(atom) system kicking around which will be re-purposed. So ive looked at a bunch of specific router distros but cant decide. I have also looked into taking a Ubuntu server or FreeBSD install and adding needed packages. So question is, what is the best router-Linux or base Linux distro and why? resources appreciated.

  Read the article

• Function key emulator for Dell inspiron 6400 on external keyboard

  - by hardik988

  I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

  Read the article

• Problem connecting to remote network using demand-dial VPN interface with Windows Server 2003

  - by Mike Forman

  I have a Windows 2003 server (SP2) that I'm trying to set up route traffic from my local network using a VPN My local network has the following components: Broadband router (192.168.0.1) Windows Server with a single NIC running RRAS (192.168.0.2 def. gateway = 192.168.0.1) Client Machine (192.168.0.3 def. gateway = 192.168.0.1) Using a VPN connection, I am trying to access a remote machine (10.0.0.1 for example) I configured RRAS with a demand-dial interface for the VPN and set it to be a persistent connection. As part of that setup, a static route to 10.0.0.0 (255.255.0.0) was created. When at the console of the server, I can ping 10.0.0.1 with no problems I added a route on the client machine using the following command: ROUTE ADD 10.0.0.0 MASK 255.255.0.0 192.168.0.2 If I run tracert 10.0.0.1 from the client, the first hop is to 192.168.0.2 which tells me that route is working. However, I cannot ping 10.0.0.1 from the client machine. What am I missing? Hopefully something simple.

  Read the article

• why is there so much variance in prices for a 2-bay NAS?

  - by jcollum

  I'm considering buying a 2bay NAS for media storage. I'm perplexed by the variety of prices. They go from about $115 to $1200. The only thing I could see that differentiated the high end drive was encryption and a dual gigabit ethernet port. I don't understand how that can add up to $800+ dollars. Clearly I should know why there's this price variance before considering buying a 2 Bay NAS. Newegg link to 2 Bay NAS Should I move this question to serverfault?

  Read the article

• Connecting/Adding a private network on windows server 2008

  - by WhyMe

  Hey all, I have a dual server configuration on a host provider using VPS. I was told by my Host provider that in order to use free bandwidth between my two servers (they are in the same location) I need to add a alias "subnet" to a specific ip (A private network, VPN). How do I add an aliased ip in widnwos? in Linux the relevant command is supposed to be (By my search in blogs) "ifconfig eth0:1 10.129.175.165 netmask 255.255.255.0" They also said that another way to connect between the servers (should also be faster) is to use "private lan", but as it happens I don't know how to define one :(. Is there a windows equivalent or another way to do this? I have checked my ip config and found no indication of the private lan or the VPN ip.

  Read the article

• Newbie: VirtualBox "no bootable medium found"

  - by Newton Falls

  My first foray into VM land so please excuse the stupidity expressed below. Running VirtualBox on Kubuntu 9.10 and trying to set up a VM running Windows 7. Windows 7 came installed and is functional as a dual-boot but I want to stay in kubuntu hence the VM. Received "Fatal: no bootable medium found" when trying to start a VM. Not surprising since VBox never gave me an option (that I recognized anyway) to tell it to look on the hard drive. I did not receive a CD of Windows 7 with the machine. How can I tell VirtualBox to grab what it needs from the hard drive? Or am I out of luck because I don't have a CD? Update: This might not be possible. The installed Windows 7 is useful only to pull the installation key. It is easier to just to download or get an ISO from a friend and enter in your own key.

  Read the article

• Caching DNS server (bind9.2) CPU usage is so so so high

  - by Gk.

  I have a caching-only dns server which get ~3k queries per second. Here is specs: Xeon dual-core 2,8GHz 4GB of RAM Centos 5x (kernel 2.6.18-164.15.1.el5PAE) bind 9.4.2 rndc status: recursive clients: 666/4900/5000 About 300 new queries (not in cache) per second. Bind always uses 100% on one core on single-thread config. After I recompiled it to multi-thread, it uses nearly 200% on two core :( No iowait, only sys and user. I searched around but didn't see any info about how bind use CPU. Why does it become bottleneck? One more thing, here is RAM usage: cat /proc/meminfo MemTotal: 4147876 kB MemFree: 1863972 kB Buffers: 143632 kB Cached: 372792 kB SwapCached: 0 kB Active: 1916804 kB Inactive: 276056 kB I've set max-cache-size to 0 to make sure bind can use as much RAM as it want, but it always stop at ~2GB. Since every second we got not cached queries so theoretically RAM must be exhausted but it wasn't. Do you have any idea? TIA, -Gk

  Read the article

• Asus PCE-N53 11n N600 PCI-E Adapter on 3.x kernel

  - by CITguy

  Problem ASUS PCE-N53 wireless NIC doesn't work for latest versions of the linux kernel. How do I get it working on my system? (Note: I'm posting the answer I've found for others to use.) Installing Driver for Linux 3.x Kernel ASUS provides Linux drivers from their website, but it mentions that the driver supports "Linux Kernel 2.6.x", so it won't work without a some modifications to the driver code. Fortunately, an archlinux forum mentions similar problems and one user was able to create a patch for kernel 3.8.x that seems to work with kernel 3.11.x. Here's how I got it working: Prerequisites Ubuntu: sudo apt-get install build-essential Arch: sudo pacman -S base-devel Steps: 1. Download the driver from the ASUS website The download can be found under "Support Drivers & Tools". 2. Unzip the contents of the downloaded file cd into the new directory 3. Patch The arch forum mentions a 3.8 patch file that needs to be downloaded. Download rt5592sta_fix_64bit_3.8.patch to the current directory. tar -xvf {driver_source.tar.gz} cd into the directory created in previous step patch -p1 < ../rt5592sta_fix_64bit_3.8.patch 4. Compile NOTE: You will need to use sudo for it to compile properly. sudo make sudo make install sudo modprobe rt5592sta 5. Enjoy If all is well, you should now have a working card.

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >