Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 131/170 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

  • Exchange on SBS2003 not receiving mail, but sending via telnet works

    - by YDdraigLas
    Last week we had a problem on our SBS2003 server where our external connection dropped out and I was only able to restore it by running netsh winsock reset catalog and netsh int ip reset. Thinking all was well, I went home for the weekend and came in today to find that we haven't received any external emails since before the original problems occurred. There are plenty of examples of this on the internet, usually to do with a firewall issue, but the odd thing here is that when I connect using telnet I can send an email and it goes straight through and into my inbox. When I send an email from Gmail or Hotmail nothing comes through at all. Internal emails are also unaffected, as are outgoing emails. There have also been a couple of emails that have come through for other users, both out-of-office replies, if that's relevant. I've run the CEICW several times, checked all the NIC settings, but no joy. Before I give up trying to fix this and reinstall the whole server, has anyone come across this problem before? I have only found fleeting references to this in previous searches and no real answers. Any advice gratefully received.

    Read the article

  • WindowsXP+7 on C:/D: :moving the System Partition

    - by user938921
    I had installed Windows 7 on a separate 20gig partition, and I'm absolutely loving it! Plus I can now dual-boot, with my original WinXP residing on the C: drive. But I'm running out of disk space on D:, and I was able to shrink C: and expand D:. But now I would like to make D: not just a Boot Partition, but an Active System Partition, without losing my ability to boot into Windows 7 (since it was created on a separate D: partition, not the current Active System C: Partition). Any advice?

    Read the article

  • D-Link wireless router losing outbound data

    - by gsteinert
    I have a Linux box running the Apache web server behind a D-Link wireless router (nothing fancy, just standard kit that comes with Virgin Media broadband). My issue is that when requesting web pages (from within the network or via the web), the back end of the page seems to be being dropped. For example, I tried to display a text-only file, and all I could get was the first 40-70% of the file (it changed slightly with each refresh). The apache access logs show that only part of the data was being sent (~6000 bytes instead of the 12000+ bytes of the file). Removing my router from the equation fixes the issue and I can download any files no matter the size with no problems. My theory is that the uploaded packets are either being dropped or held up by the config of the router. Is there anything I can do to alleviate the problem? (Perhaps a way of reconfiguring the router to upload packets harder/better/faster/stronger or an option in apache that provides a workaround) As a last resort I will get a second NIC for my Linux box and turn it into a router, but that would mean the box will be on 24/7... not the most ideal of circumstances. Gary

    Read the article

  • Resolution of monitor is not supported by motherboard

    - by Sandesh
    I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

    Read the article

  • Are there any 17-20 inch monitors that support displayport?

    - by WildJoe
    I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

    Read the article

  • Restore Windows 7 Upgraded Computer

    - by Karl
    I have a laptop that came with Windows Vista and I purchased an upgrade to Windows 7. I upgraded the computer to Windows 7. Now I am selling my laptop and would like to restore the laptop to Windows 7 original without my files. I would also need to wipe all partitions as I dual booted Ubuntu on another partition. How do I preserve my license? What are the steps I need to take? Thank you superusers for your help!

    Read the article

  • Windows 7 Boot Loader - Remove 30 second waiting time

    - by derekhh
    I've installed Fedora 17 and Windows 7 on two different hard disks as a dual-boot system. The default boot loader is GRUB 2 maintained and configured in Fedora 17. When I startup and choose "Windows 7 bootloader (on /dev/sda1)" in GRUB 2, Windows 7 boot loader will appear, with only Windows 7 as the only choice and also the default operating system, with a 30 second waiting time if no input is detected. I'm trying to see if it is possible to remove this 30-second waiting time. I've tried to follow the instructions on the Web by configuring default operating system in the control panel but seems there is something wrong with it. I've also tried to use "bcdedit enum /all" but still receives error prompts. Update: Added my boot tab screen in msconfig.

    Read the article

  • Windows 7 install crashes

    - by Alan Whitelaw
    I have a strange case that I cannot install windows 7 or windows vista on my 3 year old PC. The machine is an MSI K9NGM, with an AMD AM2 processor. I have bought a new Samsung SATA drive to install Windows 7 on, so as to preserve my existing XP install which I intend to dual boot in the future. However about half way through either a vista or w7 install (just after the mouse is shown for the first time, after the first restart) the machine will crash with a blue screen. I have removed, reordered the memory in the machine, with no luck. Does anyone have any experience of why this would happen with BOTH vista and w7 when everything is fine with XP?

    Read the article

  • how to record videos from my laptop webcam?

    - by Nick
    I am not sure but I can't seem to turn on my webcam to record videos which I would broad cast somewhere later on. I have a HP G62 Laptop, and the cam turns on when I use programs like Skype and other Video Calling clients, other wise I can't turn it own, as I don't seem to know how. Laptop: HP G62 Notebook PC, AMD Atholon II P230 Dual-Core, Windows 7: Home Premium Can some one tell me how do I turn on my webcam and record videos? Or is there some sort of a software? I tend to read stuff I wrote in Word, so if there is a program I need it to be in the tray dock and not to bug me, while I am moving between different documents/web pages.

    Read the article

  • Mixing both local and nonlocal addresses on three switches

    - by klew
    I have four computers that have nonlocal addresses like 150.X.X.X. Now I also get another few computers that should be only accessible through a gateway (it will be computing cluster) and they addresses are 10.0.0.X. I also wanted to include those four older computers to this new cluster, but I want them to be accessible from internet on nonlocal addresses (so I would like to set up them on both 150.X.X.X and 10.0.0.X addresses - I've set up it as interface eth0:0 since I have only one NIC). Those new computers have their switch and old computers also have their own switch. Both of them are connected to another (third) switch. The problem is that those old computers see each other (I can ping them), and also new computers see each other, but I can't ping old computer from new computer and vice versa. However pinging on nonlocal adresses works as expected. I looked into switch configuration and didn't find anything useful. I have no idea what I missed here. Can somebody help? All computers have Ubuntu Server 10.04

    Read the article

  • RCA monitor won't display highest resolution when NVidia drivers are installed

    - by novellterminator
    My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

    Read the article

  • Virtualbox: Raw linux partition not booting

    - by abalter
    I have a dual-boot laptop with Windows 7 and Ubuntu 12.04. I am trying to boot the ubuntu partition from windows using Virtualbox. I have successfully created the .vmdk, and created the virtual machine. However, I can't get it to boot (in Virtualbox). All I get is a black screen with the cursor in the top left. I wonder if I'm specifying the partitions correctly. My Ubuntu install has 3 partitions: \, \boot, \home. No swap partition. These are all in Disk 0, partitions 3,4,5 respectively. The command I used to create the .vmdk is: VBoxManage internalcommands createrawvmdk -filename C:\Users\abalter\.virtualbox\ubuntu.vmdk -rawdisk \\.\PhysicalDrive0 -partitions 3,4,5 Then I create a virtual machine based on that .vmdk. Why won't it boot?

    Read the article

  • Memory works fine separately, but not together

    - by patersonjs
    I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

    Read the article

  • Build Advise for Home Web/NAS Server with Ubuntu Server 12.04 [closed]

    - by razor7
    I need to have a personal Webserver with NAS capabilities. The Webserver to test some LAMP projects I develop for clients, and also NAS to be able to stream media to local network. I want to have full control of the box, so I'm planning to build it with some spare parts and Ubuntu Server. The services/software that will run are (remember, is for personal and testing use only): SAMBA/CIFS SSH Server Apache 2 MySQL 5 Mercurial Repo PHP 5.3 Ruby on Rails OwnCloud Dovecot Webmin Postfix PureFTPd ClamAV The Hardware: Intel Dual Core E2180 2.0 GHz MSI P35 Neo Kinkston 1GB DDR2, 667 MSI Nvidia 7300le PCIe x16 256mb RAM HDD SATA WD Green 2TB x2 (RAID-1 with MDADM RAID Controller) 16 GB USB Pendrive (For server system installation) My idea is to build this system, using the pendrive for the Ubuntu Server software, and packages, and the RAID-1 for gross data storage. What do you think? Thanks a lot!

    Read the article

  • Windows Internet Connection Issue (HELP)

    - by semajjames1399
    I have a windows 8 hp dual booting ubuntu. When i log onto windows i cant get on the internet... But skype and other applications can just now webpages in a browser what so ever (this is on windows 8). But on ubuntu i have no internet issues at all. From what i see right now its only the browsers in windows 8 that cant get the internet, and ive tried all the browsers i had (chrome, ie, firefox) and they cant connect but in the win8 notification area it says im connected. I can even ping via cmd. HELP! Thanks. Whats not working is that i cant get access the internet through the windows 8 broswer.

    Read the article

  • How to clone & restore virtual box hard drive

    - by user23950
    What I want to do is to clone my virtual box hdd with dual boot os. Xp and Vista. I'm using acronis and back it up on a flash drive. And end up with the flash drive that is partitioned. 2 partitions just like the virtual box hard disk. What do I do to restore it. I'm running acronis inside virtual box. What do I do to make use of the backup and actually restore what I've back up. And to be able to boot to xp and vista again inside virtual box. Please help.

    Read the article

  • Ubuntu 10.4 No internet

    - by Keeper780
    I have Ubuntu 10.4 dual booted with Windows Vista on a work Lenovo R61 laptop. The home and work wireless connection were working fine. I lost all internet connection at work. The IT guy clearly knew nothing about Linux. Since he 'fixed' it get nothing, no wlan signal the Network manager icon was gone, no internet. I still have the live disc and if I run from the live disc the connections are there and everything works perfectly. How do I restore the internet easily on my laptop. I have been using Linux for 3 Years but I am still a bit of a newbie, this is the first major problem I've had in three years. It's driving me nuts. Thanks

    Read the article

  • Cannot connect to my VPN Server from another network

    - by SantaC
    ok here is the deal. I have a Windows 2008 R2 server with RRAS installed configured for VPN. I also have DHCP running. On my DC I have AD running and they're connected with my domain. I am only using one NIC though. As a client I have Windows 7. So I tried connecting to my VPN server through my own network, which worked fine, so the setup is correct. However, when I tried connecting to my VPN server on another network, it does not work. I went to my brothers home and tried connecting to my server but it did not pass. So on my VPN server I have ip: 192.168.2.99 At my brothers house, i did the configuration on his windows 7 and it cannot connect to that ip. I am operating on the 192.168.2.1 network and he is operating on the 192.168.0.1 network. So how do I configure his client in order to get it to work? I tried changing his ip to the 192.168.2.x network, but i am not sure you can do that. I need some help here what to do.

    Read the article

  • High-End Gaming Desktop PC in France [closed]

    - by Lerikunus
    Hello, I was looking to buy an ALIENWARE AREA 51, as my Desktop crashed some days ago. But the Preliminary Ship date is 03.01.11 and I need the new PC until Friday next week =( Does someone know a(n) (online)-store where Build&Shipping time is quite low so I can get it until next Friday? I am living in France (Nice). Or any place I can ask fot his kind of advice? This is my desired configuration: Overclocked Intel® Core™ i7 980x Extreme Six Core Processor (4.0GHz, 12MB Cache) 12GB Triple Channel 1600MHz DDR3 Dual 2GB ATI Radeon™ HD 6950 2TB RAID 1+0 (4x 1TB SATA-II, 7,200 RPM, 32MB Cache HDDs) 2TB RAID 1 (2x2TB SATA-II, 7,200 RPM, 32MB Cache HDDs) Thank you very much!

    Read the article

  • How to map a virtual desktop to a monitor in a multiple monitor setup?

    - by t3
    OS: Microsoft Windows Vista SP2, Microsoft Windows 7 My laptop is plugged to a docking station that supports dual monitors, which I use extensively. I have windows placed where I want them. All is well and predictable with this setup until I un-dock. The moment I un-dock all windows that I placed in the secondary monitor piles up in the primary monitor and it is an unholy mess. So, I am looking for a solution where if I use virtual desktops, one of them can be mapped to a monitor and when un-docked what was there in the secondary monitor stays in a virtual desktop. Do you folks know of a tool or workaround that can address my quandary?

    Read the article

  • Route all traffic of home network through VPN

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Debian can't see one of my hard drives

    - by nask00s
    Today I installed Linux Debian in dual boot with Windows 7. I have 3 hard drives, two for starage and one for the operating systems. The problem is with the two storage drives which are exactly same. In debian I can only see one of them. Before Debian I had Ubuntu and there wasn't any problem. Also I didn't changed anything from that drive. What should I do? I don't want to format it or delete anything.

    Read the article

  • Running Debian as a Virtual Machine Host

    - by Tone
    I have a need to run a linux server to host subversion, bugzilla over Apache and also act as a file and print server. I also have a need to host Windows Server 2008 virtual machines for development purposes (I'm a .NET guy). The machine I have is a dual core AMD 2.5 Ghz w/2GB RAM. So here are my questions: 1) Should I run Debian (or some other distro) as the base AND create a Debian VM to host subversion, bugzilla and be my file/print server? or is it ok to use Debian as both my VM host and for those other reasons? 2) VMWare has a free server edition, Virtual Box also is another free option. Which one of these is better suited for what I need to do? Are there any other free (or inexpensive) alternatives out there? 3) Will I need a GUI with Debian in order to manage my VMs? 4) Can I run VMs without a GUI to conserve system resources?

    Read the article

  • Prevent Virtualbox intercepting certain key combinations?

    - by Blazemore
    Is it possible to prevent my Windows 7 guest OS intercepting Ctrl+Up/Down, and allow my Ubuntu how to intercept them instead? I have a dual-monitor setup with two vertical virtual desktops on Ubuntu. I have a Windows 7 fullscreen guest on one monitor, set to always display on the current workspace. This means I have effectively two vertical workspaces on one monitor, and just Windows 7 on the other. The problem occurs with Windows 7 is focussed and I hit Ctrl+Up/Down to switch workspaces. I have to click out of the VM first, which breaks my workflow. Can this be fixed?

    Read the article

  • Can I install fresh Linux accross partitions (LUKS & LVM) and preserve/use existing home user?

    - by xtian
    With an existing LUKS encrypted logical volume partitioned hard disk dual boot to Windoz and Linux (Fedora 15), is it necessary to "start over" with the LUKS setup when upgrading the system? I recall some note about dividing the Linux installation over different partitions would help to preserve the home data in future update (I can't find this now) Before I try it, is this possible and intended use case for partitioning a Linux installation? # lsblk -fa NAME FSTYPE LABEL MOUNTPOINT sda [80G] +-sda1 [system W95 FAT 32] vfat +-sda2 ext4 /boot +-sda3 [52.4G] crypto_LUKS +-luks-de25ac97-6a32-4b79-a6a0-296a39376b3b (dm-0) LVM2_member +-cryptVG-root (dm-1) [21.5G] ext4 / +-cryptVG-swap (dm-2) [5.4MB] swap [SWAP] +-cryptVG-data (dm-3) [25.6G] ext4 /home

    Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >