Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 153/1036 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• Realtek RTL8111/8168B wired network doesn't work anymore

  - by Radar4002

  This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

  Read the article

• apt-get install kernel source error

  - by MA1

  apt-get source linux-image-$(uname -r) gives me the below error Reading package lists... Done Building dependency tree Reading state information... Done Picking 'linux' as source package instead of 'linux-image-3.0.0-12-generic' NOTICE: 'linux' packaging is maintained in the 'Git' version control system at: http://kernel.ubuntu.com/git-repos/ubuntu/ubuntu-oneiric.git Skipping already downloaded file 'linux_3.0.0-17.30.dsc' Need to get 99.9 MB of source archives. Err http://pk.archive.ubuntu.com/ubuntu/ oneiric-updates/main linux 3.0.0-17.30 (tar) 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Err http://pk.archive.ubuntu.com/ubuntu/ oneiric-updates/main linux 3.0.0-17.30 (diff) 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Failed to fetch http://pk.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux_3.0.0.orig.tar.gz 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administratorThe request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Failed to fetch http://pk.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux_3.0.0-17.30.diff.gz 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) E: Failed to fetch some archives. Can someone suggest a solution?

  Read the article

• How do I enable sound with the "linux-virtual" kernel?

  - by Ola Tuvesson

  I've been trying to enable sound for the linux-virtual kernel as I want to run an ultra slim Ubuntu server under VirtualBox but need audio. The resource usage difference between virtual and generic/server is surprisingly large, with the virtual kernel system using 80Mb less RAM after a clean boot (130Mb vs 210Mb), and I really want to squeeze every clock cycle and available byte I can out of the system. Besides, the virtual kernel has some additional optimisations enabled specifically for virtual machines (or so I am told). Now I have compiled my own kernel a few times in the past, for example to include the Intel-PHC module (for improved power management on Thinkpads), so the concept is not entirely alien to me, but I've run into a strange problem which I'm hoping someone can help explain: When I do a diff between the config files for Linux-generic and Linux-virtual there are precious few differences, and certainly none which pertain to sound support; there are really only five or six lines which differ, and they're mainly to do with i/o timing, sleep state and priorities. What gives? I expected the differences to be extensive, and that I would be able to identify the options that enabled audio by looking at them, but my problem doesn't seem to be related to the config file at all (yes, I know about the sound drivers section - it is identical between the two kernel configs). Am I looking in the wrong place? Many thanks!

  Read the article

• How to setup HDMI output on m11x with Nvidia GeForce GT 540M? (Bumblebee) Help?

  - by Alexander Tritan

  I have an Alienware m11x with Optimus Technology. I setup (Fresh Install) Ubuntu 12.04 with bumblebee as below. Please help me set up the HDMI output so that I can connect it to my monitor. $ uname -a Linux ubuntu 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) $ dpkg --get-selections bumblebee install bumblebee-nvidia install $ bumblebeed -version bumblebeed --version bumblebeed (Bumblebee) 3.0 Copyright (C) 2011 The Bumblebee Project Should xrandr normally show HDMI? $ xrandr -q Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) $ cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nvidia Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nouveau Section "ServerLayout" Identifier "Layout0" Screen "Screen0" Option "AutoAddDevices" "true" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" EndSection and finally the biggest config file below: $cat /etc/bumblebee/bumblebee.conf [bumblebeed] VirtualDisplay=:8 KeepUnusedXServer=true ServerGroup=bumblebee TurnCardOffAtExit=false NoEcoModeOverride=false Driver= [optirun] VGLTransport=proxy AllowFallbackToIGC=false PMMethod=none [driver-nvidia] KernelDriver=nvidia-current Module=nvidia PMMethod=none LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia [driver-nouveau] KernelDriver=nouveau PMMethod=none XorgConfFile=/etc/bumblebee/xorg.conf.nouveau Any ideas on setting up the Optimus to output to the HDMI T.V.? I want to enable my HDMI with my GeForce GT 540M.

  Read the article

• Bluetooth on my laptop

  - by ashwani

  I have a HCL laptop on which I had previously windows XP installed in which I was able to use my bluetooth. It is of P1 utility type built-in bluetooth stak. After installing that driver I used to instal bluetooth driver after pressing p1 key on keyboard... But now I have switched to Ubuntu and unable to use my bluetooth please help i want to use my bluetooth on Ubuntu. I am currenty using Ubuntu 11.10

  Read the article

• Wired Network not working on Ubuntu 11.10 + Strange Behavior with Manual Conf

  - by Mauricio Cruz

  I'm new to Ubuntu - to be honest this is my very first day trying it... and I've already spent hours trying to make my wired connection work. I've been using this wired network with Windows and OSX, and in both systems I also had some trouble trying to connect in the past (and the troubleshooters did their magic and helped me get connected). Today, this is what I got: I'm running Ubuntu 11.10; ifconfig: eth0 Link encap:Ethernet HWaddr 78:2b:cb:c3:bf:8f UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:343 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:70 (70.0 B) TX bytes:63273 (63.2 KB) Interrupt:20 Memory:e2e00000-e2e20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1859 errors:0 dropped:0 overruns:0 frame:0 TX packets:1859 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:149368 (149.3 KB) TX bytes:149368 (149.3 KB) wlan0 Link encap:Ethernet HWaddr 10:0b:a9:82:55:c0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:15484 errors:0 dropped:0 overruns:0 frame:0 TX packets:16871 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12048377 (12.0 MB) TX bytes:2677679 (2.6 MB) I also have some information from Windows ipconfig /all that I ran at my friend's machine Ipv6 Address: <address> preferential Ipv4 Address: 172.26.65.23 <preferential> Netmask: 255.255.254.0 Default Gateway: 172.26.64.1 DHCP Server : <address> DNS Servers : <address> DNS Suffix : <suffix> The weird thing is that I've tried to configure everything manually, using "Network Connections". When I add everything inside IPv4 Settings, the connection is finally successful, but only for 4~5 seconds before getting disconnected again... Update:I just changed the Connection Method to "Local-Link Only", and the same described above happens: At first, it says "Connection Stablished", but after a few seconds, the wired network gets disconnected. I hope someone can help me get connected! Thanks!

  Read the article

• Installation failure

  - by Peter Kelson

  I have just downloaded Ubuntu and burned an installation DVD. I used it to install Ubuntu on a PC running Windows XP choosing the option to run Ubuntu alongside Windows. I chose to install the additional updates after initial installation. When I choose Ubuntu from the menu displayed on boot-up I get a purple and yellow screen which is completely blank except for the functioning mouse pointer. I would be grateful for suggestions on how to fix this.

  Read the article

• Extra buttons on Razer Anansi on Ubuntu 13.04

  - by jjpe

  I own a Razer Anansi keyboard and recently installed 13.04 after running 12.04 for over a year. On 12.04 I used xmodmap to map the thumb and macro keys to do useful stuff for me. This solution is based on keycodes which are triggered when a key is recognized. The problem is that on 13.04 this does not work for all keys anymore. The thumb keys T2, T3 and T4 (i.e. the middle 3 ones on the top of the 2 rows) in particular don't generate keycodes anymore while the rest still does. Now this is not completely surprising: pressing the affected keys in Unity generates notifications for what looks like Unity touchpad notifications. How can I shut that touchpad-subsystem up once and for all and give my keyboard keys back to my keyboard? Ideally I'd like to be able to use my .Xmodmap file again in 13.04 (and beyond) as that seems to me the most simple solution, but working alternatives are also welcome.

  Read the article

• Error when upgrading initscripts using dist-upgrade on a cd image using uck

  - by InkBlend

  I was using UCK to customize an Ubuntu 11.10 image, and ran a dist-upgrade on it (from the console) to try to update all of the packages on it. The upgrade worked successfully for all but two packages, so I tried again and got the same error message. This is what happened: # sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initscripts (2.88dsf-13.10ubuntu4.1) ... guest environment detected: Linking /run/shm to /dev/shm rmdir: failed to remove `/run/shm': Device or resource busy Can't symlink /run/shm to /dev/shm; please fix manually. dpkg: error processing initscripts (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of ifupdown: ifupdown depends on initscripts (>= 2.88dsf-13.3); however: Package initscripts is not configured yet. dpkg: error processing ifupdown (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: initscripts ifupdown E: Sub-process /usr/bin/dpkg returned an error code (1) # How can I fix this? Is the problem with the ISO, dpkg, or can I just not upgrade some packages with UCK? I am using Ubuntu 11.10 to and UCK 2.4.5 to customize an Ubuntu 11.10 image.

  Read the article

• After upgrading to 12.04 from 10.10 my mythbuntu standard MCEUSB remote no longer works

  - by keepitsimpleengineer

  I had no problems using my Windows Media Center Remote with 10.10 Mythbuntu, but after upgrading, it no longer affects Mythbuntu. I have verified and re-installed it in Mythbuntu Control Centre. I have used irw to verify the ir buttons actions are properly received by the HTPC. How do I go about fixing this? 3.2.0-26-generic (#41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012) Xorg version: 1.11.3 (16 July 2012 08:06:31PM) GCC: 4.6 (x86_64-linux-gnu) Current updates as of 2012?07?21 $cat /etc/lirc/hardware.con #Chosen Remote Control REMOTE="Windows Media Center Transceivers/Remotes (all)" REMOTE_MODULES="lirc_dev mceusb" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="mceusb/lircd.conf.mceusb" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" # lsusb | grep -i infrared Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver

  Read the article

• When I update, It says I should check my internet and it says I should I should use apt-cdrom but I can't get onto it

  - by Joey

  W:Failed to fetch cdrom://Ubuntu 12.10 _Quantal Quetzal_ - Release amd64 (20121017.5)/dists/quantal/main/binary-amd64/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , W:Failed to fetch cdrom://Ubuntu 12.10 _Quantal Quetzal_ - Release amd64 (20121017.5)/dists/quantal/restricted/binary-amd64/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , W:Failed to fetch cdrom://Ubuntu 12.10 _Quantal Quetzal_ - Release amd64 (20121017.5)/dists/quantal/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , W:Failed to fetch cdrom://Ubuntu 12.10 _Quantal Quetzal_ - Release amd64 (20121017.5)/dists/quantal/restricted/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , E:Some index files failed to download. They have been ignored, or old ones used instead.

  Read the article

• Measure load of ubuntu server

  - by user84471

  I have Ubuntu server and apache2 installed on it. I want to benchmark it using ab tool from another machine. I want to know how measure load of this program. In top is showing this: top - 06:02:19 up 3 min, 2 users, load average: 0.28, 0.26, 0.12 Tasks: 94 total, 2 running, 92 sleeping, 0 stopped, 0 zombie Cpu(s): 67.2%us, 5.5%sy, 0.0%ni, 26.3%id, 0.5%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 499320k total, 342028k used, 157292k free, 42504k buffers Swap: 514044k total, 0k used, 514044k free, 71388k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1521 www-data 20 0 49180 22m 4144 S 23 4.6 0:00.68 apache2 1520 www-data 20 0 49180 22m 4152 S 22 4.6 0:00.66 apache2 1124 www-data 20 0 49180 22m 4152 S 22 4.6 0:00.70 apache2 1519 www-data 20 0 49180 22m 4152 S 20 4.6 0:00.70 apache2 1525 www-data 20 0 49180 22m 4144 S 16 4.6 0:00.47 apache2 1123 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.78 apache2 1125 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.77 apache2 1126 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.73 apache2 1127 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.74 apache2 1523 www-data 20 0 42896 14m 3388 R 5 3.1 0:00.14 apache2 1038 whoopsie 20 0 24476 3720 2856 S 0 0.7 0:00.01 whoopsie 1089 root 20 0 34060 6988 3640 S 0 1.4 0:00.05 apache2 1338 ubuntu 20 0 2832 1192 944 S 0 0.2 0:00.30 top 1417 ubuntu 20 0 9652 1456 824 S 0 0.3 0:00.02 sshd 1 root 20 0 3540 1876 1248 S 0 0.4 0:00.83 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.03 ksoftirqd/0 4 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/0:0 5 root 20 0 0 0 0 S 0 0.0 0:00.48 kworker/u:0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 9 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0 10 root 20 0 0 0 0 S 0 0.0 0:00.01 ksoftirqd/1 11 root 20 0 0 0 0 S 0 0.0 0:00.17 kworker/0:1 12 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 13 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 14 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 15 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 16 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 17 root 20 0 0 0 0 S 0 0.0 0:00.32 kworker/u:1 18 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers 19 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default 20 root 0 -20 0 0 0 S 0 0.0 0:00.00 kintegrityd 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 kblockd 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 ata_sff 23 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd So its difficult to do it without any script or program. How can I do this?

  Read the article

• Bumblebee - Poor performance with games

  - by user106880

  I have an Alienware M14x (GeForce 650m with Optimus) and got Bumblebee working correctly (trying to get ready for steam for linux :)). Also I'm running Ubuntu 12.10 with Unity. I get great framerates with glxgears and sauerbraten (a game on the repositories), but when I run games like Bastion and Splice, I get pretty terrible framerate, in fact worse than my integrated intel gpu. I have nvidia-current installed under ubuntu-x-swat/x-updates so it's driver version 310.xx. Also I forgot to add that I haven't been able to test other drivers because they seem to break glx (x can't load the glx module). I've been troubleshooting this for days now, and I'm very nearly out of ideas. Any hints on why only some games are running so poorly with bumblebee?

  Read the article

• Synaptics error "no touchpad found" at startup on HP laptop

  - by Sandra

  I know there are a lot of topics on the synaptics touchpad not working, but I can't seem to find the answer to my problem anywhere. Please forgive me if I missed it. Here is what happened. After using the "ambient light" F11 key on my HP laptop (Compaq nc8430), the touchpad was disabled and I couldn't get it to work. Then I found this thread : "Synaptic touchpad on laptop not working". And Salem's answer totally solved my problem, both for the session fix and for the permanent fix. But since then, after each reboot I get the same error pop-up, with the following content: No touchpad found. No touchpad was found in this system. If the system has a touchpad, please make sure that the synaptics driver is properly installed and configured. If your touchpad is not found, though the driver is installed and configured correctly, please compile detailed information about your touchpad hardware and report this issue to the issue tracker. Needless to say, the driver is indeed installed, activated and configured (even though it's kind of useless now, since I guess the .conf file I created is doing all the work). I know it's a minor issue, because the touchpad does work properly, but it's getting really annoying... So, could anyone please help me fix this error pop-up problem ? Thank you !

  Read the article

• How to join video files from terminal?

  - by Leon Vitanos

  I have tried avidemux2_cli, mencoder, ffmpeg, cat.. But this doesn't always work (With the most of the times the error is that the audio codec is not the same) Maybe i put wrong options in the commands. So the commands: cat Sample.avi rrr.avi > complete.avi ffmpeg -i Sample.avi -i output.avi -vcodec copy -acodec copy complete.avi mencoder -ovc lavc -oac copy Sample.avi rrr.avi -o complete.avi avidemux2_cli --audio-codec copy --video-codec copy --output-format avi --load Sample.avi -append output.avi --save video.avi The cat problem is that it doesn't show error but it doesn't work always..Like the complete.avi will be exactly the same with Sample.avi Fmmpeg does nothing. The complete.avi is always the same with Sample.avi Mencoder error: All files must have identical audio codec and format for -oac copy. So the complete.avi is the same with Sample.avi avidemux2_cli there is no error but the complete.avi is again the same with Sample.avi.. So to sum up, all complete.avi are the same with Sample.avi.. And the problem is that they don't have the same audio codec ( i quess ).. Any ideas?

  Read the article

• No space on device

  - by user170810

  Today I tried to move a huge directory to a common directory for 2 users. I first tried to change the permissions of my home directory. So something happened with my ~/.private directory and the disk was full! I have a 2 TB disk. I cannot make a backup, I cannot even enter graphics mode. Please help. Are there a way to restore my contents without making backup? Even creating ~/Private is impossible -- "no space on the device". I have no Private, and don't tell me that I have erased it, because it is not true. Are there some utilities to restore the files and make them not encrypted?

  Read the article

• Proper way to let user enter password for a bash script using only the GUI (with the terminal hidden)

  - by MountainX

  I have made a bash script that uses kdialog exclusively for interacting with the user. It is launched from a ".desktop" file so the user never sees the terminal. It looks 100% like a GUI app (even though it is just a bash script). It runs in KDE only (Kubuntu 12.04). My only problem is handling password input securely and conveniently. I can't find a satisfactory solution. The script was designed to be run as a normal user and to prompt for the password when a sudo command is first needed. In this way, most commands, those not requiring sudo rights, are run as the normal user. What happens (when the script is run from the terminal) is that the user is prompted for their password once and the default sudo timeout allows the script to finish, including any additional sudo commands, without prompting the user again. This is how I want it to work when run behind the GUI too. The main problem is that using kdesudo to launch my script, which is the standard GUI way, means that the entire script is executed by the root user. So file ownerships get assigned to the root user, I can't rely upon ~/ in paths, and many other things are less than ideal. Running the entire script as the root user is just a very unsatisfactory solution and I think it is a bad practice. I appreciate any ideas for letting a user enter the sudo password just once via GUI while not running the whole script as root. Thanks.

  Read the article

• Uninstall backtrack 5 dual booted with Ubuntu

  - by omerjerk

  Some days ago I installed BackTrack over my Ubuntu installation. I was having some problems in the bootloader of BackTrack. So I set default bootloader to that of Ubuntu. I didn't remember the command that I typed. so now the default bootloader is of Ubuntu and I want to completely remove BackTrack. how to do that ? If I just delete the installation files of backtrack from ubuntu then it'll still be there in the bootloader.

  Read the article

• How can I audit users and access attempts to SSH on my server?

  - by RadiantHex

  I've had a few security problems with a server of mine, a few SSH users have been setting up fires aka giving problems. I would like to: Track user logins and logouts Track activity of these SSH, in order to discover any malicious activity Prevent users from deleting logs I am not much of a sys admin and I am quite inexperienced in this matter, so any kind of advice would be very welcome and very helpful. :)

  Read the article

• Can't delete an iptables chain

  - by Raul Adrian Altavano

  I'm having a problem on deleting a user-defined chain. these the are rules I entered. sudo iptables -t mangle -N internet sudo iptables -t mangle -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j internet sudo iptables -t mangle -A internet -j MARK --set-mark 99 sudo iptables -t nat -A PREROUTING -i eth1 -p tcp -m mark --mark 99 -m tcp --dport 80 -j DNAT --to-destination 192.168.3.1 When i'm using -X or -D, it gives me this error iptables: No chain/target/match by that name.

  Read the article

• ubuntu 11.10 install 4.4.3-0ubuntu2 package dependencies

  - by HuangheWoo

  before sudo apt-get install gnuplot I sudo apt-get build-dep gnuplot to resolve package dependencies. ~$ sudo apt-get build-dep gnuplot Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'liblua5.1-0-dev' instead of 'liblua5.1-dev' The following packages will be REMOVED: libgd2-xpm ubuntu-desktop The following NEW packages will be installed: debhelper diffstat html2text intltool-debian libbsd-dev libcairo-script-interpreter2 libcairo2-dev libedit-dev libexpat1-dev libfontconfig1-dev libfreetype6-dev libgd2-noxpm libgd2-noxpm-dev libglib2.0-dev libjpeg62-dev liblua5.1-0-dev libncurses5-dev libpango1.0-dev libpixman-1-dev libpng12-dev libreadline-dev libreadline6-dev libtinfo-dev libwxbase2.8-dev libwxgtk2.8-dev libxcb-render0-dev libxcb-shm0-dev libxft-dev libxrender-dev po-debconf quilt texinfo wx2.8-headers x11proto-render-dev 0 upgraded, 34 newly installed, 2 to remove and 0 not upgraded. Need to get 9,100 kB of archives. After this operation, 37.8 MB of additional disk space will be used. It says the "ubuntu-desktop" will be removed, but "ubuntu-desktop" is important. What's should I do?

  Read the article

• FGLRX installation without main monitor

  - by Chris

  This is a spiritual follow up to this I am doing some modern OpenGL tutorials and I have found that MESA does not support openGL 3.0+, so I need to get back to FGLRX even if its given me grief in the past. Every time I have tried to install FGLRX drivers I generally get thrown to the terminal and have to do some recovery, etc. before I can get them to work. Problem is, now that my main monitor is borked, when I install FGLRX drivers I cannot boot to terminal. Question: How do I back up my current windowing so that when I (inevitably) lost my boot due to FGLRX installation, I can recover it with a livecd without reinstalling, and how can I install it without a main monitor?

  Read the article

• Why does my Grub have two entries for Windows?

  - by Tomas Lycken

  I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

  Read the article

• How to recover unavailable memory in /dev/shm

  - by Alain Labbe

  Good day to all, I have a question regarding the use of /dev/shm. I use it as a temporary folder for large files to speed up processing and save IO off the HD. My problem is that some of my scripts sometimes require "forceful" interruption for a variety of reasons. I can then manually remove the files left over in /dev/shm but the memory is not returned to available space (as seen by df -h). Is there any way to recover the memory without restarting the system? I'm using LTS12.04 and most of the scripts are PERL running system call on C programs (bioinformatics tools). Thanks.

  Read the article

• avr-gcc 4.7 on ubuntu 12.04

  - by birky

  Please how can I install avr-gcc version 4.7 on ubuntu 12.04? :~$ avr-gcc -v Using built-in specs. COLLECT_GCC=avr-gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/avr/4.5.3/lto-wrapper Target: avr Configured with: ../src/configure -v --enable-languages=c,c++ --prefix=/usr/lib --infodir=/usr/share/info --mandir=/usr/share/man --bindir=/usr/bin --libexecdir=/usr/lib --libdir=/usr/lib --enable-shared --with-system-zlib --enable-long-long --enable-nls --without-included-gettext --disable-libssp --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=avr Thread model: single gcc version 4.5.3 (GCC) :~$ gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.6/lto-wrapper Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >