Search Results

Search found 42982 results on 1720 pages for 'web clips'.

Page 1532/1720 | < Previous Page | 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539  | Next Page >

• Connection failed between Windows Servers

  - by Kerby82

  I'm setting up an infrastructure based on Windows Server 2012. The firewall is turned off and I can't access the Domain controller to check for the group policy. I'm experiencing some connection problem between servers. All the servers are running a site on the TCP Port 80 and I check with netstat that the web server is binding on every Ip of the servers. If i try to telnet from the server itself on the port 80 it works (using DNS name) if I try same telnet from another machine I get connection failed. The DNS works, the ping is successfull, the servers are on the same subnet, the firewall is turned off (even though windows advanced firewall says that some settings can be managed by the System Administrator, i guess group policy). I don't know how to troubleshoot further. Do you have any idea? Is that possible that the FW looks turned off but there are some group policy blocking the connections? (I also check group policy-Administrative Template-Network Connections- Windows FW everything is not configured) I need some hint on how to keep troubleshooting such a problem.

  Read the article

• Help trying to figure out why IIS7 is crashing / locking up / denying connections

  - by Pure.Krome

  Hi folks, I've got a pretty busy website that is running on a single web front end machine, on W2K8 + IIS7. Every now and then - eg. maybe monday at 3am or something, then a few days later .. some early morning time .. then nothing for 2 weeks ... etc - the website fails to respond to any client connections. ie. no one can connect to the website. I can remote desktop to the machine, etc no probs. I restart the app pool (the website is running in intergrated mode), still nothing. I try and get a crash dump of the process (it's around 600 mb maybe even more) ... that fails after about a min of trying (and i have plenty of HD space). The only way to fix this issue, is to manually stop the www service and then start it again. The stopping takes a while (a minute?) while starting is nearly instant. I'm at a loss to figure out what part of my code is causing this. At first, I thought it might be a stack overflow because of some error that might be going to the error page, which in turn errors .. rinse repeat boom. But i've had a look at the error page and it feels ok. So, I'm hoping someone might be able to help and say how I can correctly get a proper dump of the IIS process so i can then do some more autopsy on it. I would email Tess Ferrandez (the goddess of crash debuging) but I thought I'd try here before I spam her. Can anyone have any suggestions to how I can figure out how to start to debug this issue?

  Read the article

• iptables firewall rules not allowing ssh from lan to DMZ

  - by ageis23

  Chain INPUT (policy ACCEPT) target prot opt source destination REJECT tcp -- anywhere anywhere tcp dpt:www reject-with tcp-reset REJECT tcp -- anywhere anywhere tcp dpt:telnet reject-with tcp-reset ACCEPT 0 -- anywhere anywhere state RELATED,ESTABLISHED DROP udp -- anywhere anywhere udp dpt:route DROP udp -- anywhere anywhere udp dpt:route ACCEPT udp -- anywhere anywhere udp dpt:route logdrop icmp -- anywhere anywhere logdrop igmp -- anywhere anywhere ACCEPT udp -- anywhere anywhere udp dpt:5060 ACCEPT 0 -- anywhere anywhere state NEW logaccept 0 -- anywhere anywhere state NEW ACCEPT 0 -- anywhere anywhere ACCEPT 0 -- anywhere anywhere ACCEPT 0 -- anywhere anywhere logdrop 0 -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT 0 -- 192.168.0.0/24 192.168.2.0/24 reject-with icmp-port-unreachable ACCEPT tcp -- choister 192.168.2.142 tcp dpt:ssh state NEW REJECT 0 -- 192.168.0.0/24 192.168.3.0/24 reject-with icmp-port-unreachable ACCEPT gre -- 192.168.1.0/24 anywhere ACCEPT tcp -- 192.168.1.0/24 anywhere tcp dpt:1723 ACCEPT 0 -- anywhere anywhere ACCEPT 0 -- anywhere anywhere ACCEPT 0 -- anywhere anywhere ACCEPT 0 -- anywhere anywhere TCPMSS tcp -- anywhere anywhere tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU lan2wan 0 -- anywhere anywhere ACCEPT 0 -- anywhere anywhere state RELATED,ESTABLISHED logaccept tcp -- anywhere choister tcp dpt:www TRIGGER 0 -- anywhere anywhere TRIGGER type:in match:0 relate:0 trigger_out 0 -- anywhere anywhere logaccept 0 -- anywhere anywhere state NEW logdrop 0 -- anywhere anywhere The ssh server I'm trying to connect to is in the DMZ(192.168.0.145). It's mainly used as a web server. I need access to it from my room 192.168.2.142. I don't get why ssh can't forward onto the 192.168.2.0 subnet? I'm sure it's the reject rule that causing this because it works without it.

  Read the article

• Reverse Proxy issues IIS on Windows Server 2012

  - by ahwm

  I've tried searching, but nothing seems to be working. I have a feeling it might be due to our custom Rewrite module. Here is the excerpt from the web.config that sets it up: <modules runAllManagedModulesForAllRequests="true"> <add name="UrlRewriteModule" type="EShop.UrlRewriteModule"/> </modules> EShop.UrlRewriteModule is a custom class in App_Code which handles incoming requests. I have set up the rewrite rules but it doesn't seem to want to work. I'm inclined to think that our rewrite class is interfering earlier than the proxy rules and saying that the page doesn't exist. Here's what we're trying to accomplish: We are working on a new site for a client, but they have a forum that they're not likely to want to move. I set up a new subdomain to point to the new server while the site is being completed (before we go live) and want the reverse proxy to forward test.domain.com/forum to www.domain.com/forum. After the site goes live, we'll need to forward using an IP address instead. I've set up a reverse proxy successfully with nginx, but we didn't want to set up another server if we didn't need to. Ideas?

  Read the article

• Cheap Solution for Routing a Toll Free Number to a Standard POTS Number

  - by VxJasonxV

  I do some technical work for an Internet Radio Show/Podcast, and need to fix something that has been broken for a while. The hosts have a Skype-In number to take listener calls, and for convenience sake, I bought and paid for a toll free number for a period of time. I used to use Asterlink for routing calls, but they folded and sent my number to OneBox, but they're ridiculously expensive by comparison. I'm looking for a cheap solution for this one simple task. Forward toll free calls to a skype-in number. The definition of cheap is as cheap or cheaper than Asterlink was. I paid something like $2 a month, and then the termination/call rate, which was a fraction of a sent for termination, and only whole cents after some serious time on the call. A $20 preload lasted me months at a time. I don't want to be upsold too, I want a simple web based management screen (CDR/stats are fun!), and obviously, it needs to be reliable. What vendors out there are you a fan of that solves this need?

  Read the article

• Want to send my neighbors to a certain website via DNS, but don't have a clue how. [closed]

  - by Akku

  My neighbors have an unsecured WIFI router, and over the administration web-UI of the router I could log in as there was no password set. I don't know which of my neighbors these are, and I'd like to configure their router in a way that they come to my website instead of Google and Facebook, where I set up a warning in german. It this page: http://www.abelssoft.de/liebenachbarn/ Basically, I just want to see if and how this is possible - I'm aware that I could just set the WiFi-password and have them call their network provider to reset the thing, but I really want to see if this could work, because it would be a way cooler effect :-). So this router interface doesn't allow custom redirects, only filters. BUT I can set the DNS that is used, so I thought there might be the possibility to set up a custom DNS on a server, set it as the main DNS and redirect from Google to the URL above. Is this possible? If so, please try to detail a way that I have to go though to achive this. Note that I'm not the super-Linux-skilled person, I have a dyndns account and a Windows machine it points to as well as an Apache+Tomcat if that helps. I could also set up virtual machines on the windows server and redirect to those using a different port. Or is there maybe a webservice that provides such custom DNS?

  Read the article

• Multiple Settings for One Monitor

  - by Lynda

  I have my monitor set to the way I like it, it shows colors accurately and not overly bright (white doesn't blind me). However I edit photos for the web and this is great for my screen but I have noticed when looking at other screens my photos will at times looked washed out and not a good presentation. If I manually change my monitor settings to be brighter (and a few other tweaks) I can replicate the look of other monitors close enough to help prevent washed out/blown out photos. Here is the issue, I need to be able to change settings between the two fairly easily. To manually set my monitor for one then back to the other can be time consuming and a pain to set right every time. I would like to be able to preset certain settings (in software) that I can quickly switch between by pressing hotkeys or clicking shortcut on my desktop. I have an AMD video card and have attempted to use the AMD VISION Engine Control Center to add presets then tweak the settings for each. However when I switch between the presets the settings are the same. How do I build presets using the VISION Engine Control Center that actually works (maybe I misunderstand what it is saving?) or is there a way to do this in Windows 7 or free software that actually works decently for this purpose?

  Read the article

• what are valid 'ack' values?

  - by WileECanisLatrans

  having an issue with a vendor who claims the cause of a problem is an invalid 'ack' value in the tcp data. I'm using java so I didn't write this layer. I used snoop to capture the traffic on the wire and am using wireshark to display the data. Here is what is happening. After receiving a multi-packet(5) message I see a multi-pack(3) response. The first packet in the response has a value for 'ack' that is different than the 'ack' value in the other two packets. The vendor claims this data is suspect. I've provided sample data below. I'm not a tcp expert so I don't know if this is a problem or not. I've tried to find something on valid ack values and it seems to me the value should be 80018 but that doesn't mean the 78345 is wrong. I found this on the web and it seems to apply but I'm not sure: "the ack value of any data segment is considered valid as long as it does not acknowledge data ahead of the next segment to send". Thanks for your help. My understanding is the vendor has written their own tcp layer. * source seq ack len * vendor 75465 10924 0 * vendor 75465 10924 1440 * vendor 76905 10924 1440 * vendor 78345 10924 1440 * vendor 79785 10924 233 * me 10924 78345 0 * me 10924 80018 0 * me 10924 80018 197

  Read the article

• Liked Arch Linux - but I am still not sure if its the right distro for me...

  - by BlackAndGold

  As the title says... I used Arch Linux for a while and liked it a lot: leightweight, sleek, fast and well documented with a great community. However I had to format my hd and for the sake of being too lazy to reinstall arch, I used windows 7 exclusively for a while. Now I want to get back to linux again (still dual boot), mainly for web development purposes and using handy tools such as rsync ect. Again, I liked Arch, but there is too much tweeking, too much reading up and too much figuring out what to do as well es some bad suprises especially when you need them the least and when just quickly want to get some work done. I kind of would like to have a little more "out of the box" distro that is still fast and somewhat leighweight and of course reliable. I actually considered Ubuntu, which I am not too big of a fan of, but I will still give the minimal install a shot. However other distros seem interesting as well, such as crunchbang and mint debian ecpecially. My question, hoping this isn't too boring for many you, what is the right distro for me?

  Read the article

• virtualized windows 2003 domain with CentOS 5.3 and poor connectivity

  - by Chris Gow

  Hi: I have a test lab set up running a virtualized windows 2003 domain on a CentOS 5.3(xen) host and am experiencing connectivity problems with guests running on other hosts that are part of the same domain. Here's the setup: On Computer A I have CentOS 5.3 running as the host and have virtualized windows 2003 servers for a primary domain controller, a backup domain controller and an exchange server. The primary domain controller also acts as a WINS and dns server. The windows domain appears on a separate subnet from my company's corporate network. Connectivity to any of the virtualized guests on Computer A is fine (remote desktop, ping, what have you). I have another host computer (Computer B) that also has a virtualized Windows 2003 server guest that is part of the same domain. However, connectivity to that guest is flaky at best. I continuously get at least 60% packet loss when I try to ping the guest, and due to that flakiness I can not access any of the services that it runs (remote desktop, web). Now here's the interesting part. It seems to affect only machines running on a different computer than the domain controller that are in the same domain. On Computer B there is another Windows 2003 guest that is not part of the test domain and is on my corporate network. There's no connectivity issues with that guest machine. The problem does not seem to be specific to Computer B either. I created a test VM on my local computer within the test domain and it exhibits the same behaviour as the guest in Computer B. A couple of items to note: - Host OS on both Computer A and B are the same CentOS 5.3 64 bit - Guest OS is Windows 2003 64 bit and 32 bit (the guest on Computer B is 32 bit) - Guest OSes are all up to date (as of Monday) - Host OS on Computer A was upgraded from CentOS 5.2 to 5.3 Update: Sorry I did not follow up with the comments from below. Computer A and B have been moved to their own dedicated switch and the problem has gone away. I'm not sure what the underlying problem(s) were though

  Read the article

• Weird Apache behaviour and with files again

  - by afifio

  Hi and thanks for stopping by. I have read Weird Apache problem with file, I have read Weird Apache problem with file ...and its not the problem Setup single XAMPP installation on Windows, single windows user, 2HD, 1 is a portable USB. All is fine, until I move the xampp to new portable HD Symptom Old php files - works fine, new one doesnt http://127.0.0.1/Ajax/index.php - yay http://127.0.0.1/test2/t.php - display the source code http://127.0.0.1/Ajax/test2/t.php - display the source code http://127.0.0.1/Ajax/t.php - display the source code Extra Info IIS+MS Web Development stuff, .NET4, Asp, etc is being installed and still hast reboot yet. .htaccess also seems doesnt work Apache2 conf file was modified to Averride All and still it doesnt care. One of the directory supposed to treat .htm as php yet got text, created another directory and edit a phpinfo, still another text, browse to phpmyadmin, viola, works fine Suspect Does Apache honour XP security and permission ? If so, this is a single user computer. Does Apache dont like my new hard disk/new place ? Why it doesnt execute the php in new directory but happily execute in old folder ? Thanks for the riddle answers

  Read the article

• Apache2: Limit simultaneous requests & throttle bandwidth per IP/client?

  - by xentek

  I want to limit simultaneous requests & throttle bandwidth per IP/Client on a single apache vhost. In other words, I want to ensure that this site, which hosts large media files, doesn't get hammered by someone trying to download everything all at once (just happened the other night). I'd like to limit the outgoing transfer speed overall for this site, as well as limit the number of connections a single IP can make to the server to a sane default (i.e. within normal browser limits for multiple requests so page loads aren't effected too much). Bonus points if I can actually scope it to file types (i.e. leave web files alone, but apply these rules to just the media files). We're running Ubuntu 9.04 on all the servers, and have two apache/php servers being load balanced via Round Robin by a squid proxy server. MySQL is running on its own box as well. We've got plenty of bandwidth to give them, so I don't really want overall caps, but just want to throttle the amount of memory/CPU it takes to serve this site. There other sites on these servers that we don't want to apply these rules too, just want to keep this one from hogging all the resources. Let me know if you need more info! Thanks in advance for your suggestions!

  Read the article

• Nginx proxy upstream cached?

  - by Julian H. Lam

  Attempting to resolve an issue that's been annoying me for a bit. I've distilled the symptoms into a set of reproducible steps: I have two sites, siteA, and siteB. They are both Node.js applications running on different ports (for the sake of example, 4567 and 4568) Both applications have their own file in sites_available (plus a symlink from sites_enabled), which contain the directives proxy_pass http://node_siteA/ and proxy_pass http://node_siteB/ respectively, inside of a location block. They also each have an upstream block (defined globally?): upstream node_siteA { upstream node_siteB { server 127.0.0.1:4567; server 127.0.0.1:4568; } } Site A and Site B have nothing to do with each other. Yes, I am restarting (reloading, actually) nginx every time I make a change. If I take down site B and attempt to access it via the web, I am served site A. Why is this? Thoughts Other times, when I create a new Site C, for example, nginx refuses to show me anything except "Welcome to nginx!" for ~5 minutes. This suggests a resolver timeout, perhaps? When I access Site B after its config has been deleted, and it sends me to Site A, this sounds like nginx sending me to servers in a round-robin fashion...

  Read the article

• Can Octopussy use messages other than syslog style?

  - by Lee Lowder

  I am currently exploring different options for a centralized log server. We use both Linux (Ubuntu 10.04 / 12.04, LTS for both) and Windows, though for this specific issue only Linux is relevant. I like the interface that octopussy has and it's feature list, but I am hesitant due to a few things. One of the biggest concerns I have is that it seems to be syslog only. The end goal is to have a centralized place for our devs and admins to be able to search through the logs generated by Apache, Tomcat and 70+ web apps spread out among a cluster, for both our prod and test environments. While I did see that octopussy has support for plugins, I haven't been able to find any sort of plugin repo or in depth guides as to what can be done with them. Does anyone know if plugins can be used to allow octopussy to non-syslog messages? Specifically log4j type log messages that may include multi-line stack traces and such. Also, is there a user community for this software, such as a mailing list or forum? I've been unable to locate any so far. Thank you.

  Read the article

• Linux NFS create mask and force user equivalent

  - by Mike

  I have two Linux servers: fileserver Debian 5.0.3 (2.6.26-2-686) Samba version 3.4.2 apache Ubuntu 10.04 LTS (2.6.32-23-generic) Apache 2.2.14 I have a number of Samba shares on fileserver so that I can access files from Windows PCs. I am also exporting /data/www-data to the apache server, where I have it mounted as /var/www. The setup is okay, except for when I come to create files on the NFS mount. I end up with files that cannot be read by Apache, or which cannot be modified by other users on my system. With Samba, I can specify force user, force group, create mask and directory mask, and this ensures that all files are created with suitable permissions for my Apache web server. I can't find a way to do this with NFS. Is there a way to force permissions and ownership with NFS - am I missing something obvious? Although I've spent quite a bit of time with Linux, and am weaning myself off Windows, I still haven't quite got to grip with Linux permissions... If this is not the right way to do things, I am open to alternative suggestions.

  Read the article

• Configuring IE to resolve DNS at the proxy rather than locally.

  - by dankilman

  With the intention of tunneling web traffic through an SSH connection, the following has been done: I've manually configured a PAC file in IE7 in the LAN Settings dialog. I've verified that traffic is routed through my SSH tunnel that is setup for SOCKS5 dynamic port forwarding. I see that IE7 is always trying to resolve the name locally first. What I'm looking for is the ability to have the DNS name resolved at the proxy, rather than locally by the browser. There's a setting in Firefox that specifies DNS remote resolution, and Safari does it automatically. I've verified correct operation for these 2 other browsers. It would be nice if I could get IE to work also. This is for reference so you could understand where does the question originate from. Notice: The question was actually found by the help of google but with no answers available. Considering how it is exactly my question I figured I should just copy/paste over here because I don't think I could describe any better (there is a small introduction though).

  Read the article

• GIT Website Deployment

  - by Brian

  I am attempting to setup GIT to deploy my project to different locations based on the branch. (I think this is what I want to do anyway). My current setup is this: Local dev machine running Netbeans to make changes. Remote server hosting GIT projects (same server running apache) - 2 subsites exist a test.FQDN.com and a live.FQDN.com What I would like to do is have 1 GIT project (MyProject) and create a new feature branch. Any commits done to the new feature branch would push to test.FQDN.com. Once the features have been tested and then merged into the master branch, it would push to live.FQDN.com. I have looked at GIT's post-receive hooks and was able to use "git checkout -f" command to pull on the test.FQDN.com site however that only pulls the master branch and not the new feature branch. I do not have any funding to use a third party to make this work, and would prefer to stay within GIT but have full root access to the web server if there is a package to install which would help control this. Any suggestions would be great!

  Read the article

• Automatic o/s reset on a dedicated internet browsing Windows 7 pc.

  - by camelCase

  I have just purchased a new Acer Revo nettop PC for dedicated internet browsing. It will be the only pc on a home network. My original plan was to install one virtual PC for family browsing, another for remote web based server administration and ban browser use from the host Windows 7 o/s. The idea was that I could recover to a fresh VHD image once a week to eliminate any build up of malware inside the browser VMs. However now I am looking for alternative solutions since the Intel Atom cpu does not have hardware VT support which Windows Virtual PC requires. Would it be possible to engineer some type of routine overnight host o/s wipe and recovery? I guess cyber cafes do something like this? The only user data that would need to be retained across a recovery would be browser bookmarks but these could be exported to remote service. Edit 1: I am thinking the o/s reset could be done via some disk image recovery process. Edit 2: Just had a brainwave. Routine browsing could be done via the new Google Chrome O/S. I have just seen a video of the Google Chrome o/s booting off a usb pen drive in seconds.

  Read the article

• SVN client too old after I used sshfs

  - by johnlai2004

  I have a svn checked out web application on a shared hosting linux server. The linux server has an svn client that I can access via ssh. From my localhost, I did the following > sshfs [email protected]:webappdir/ /media/webapp > cd /media/webapp > svn update svn: Working copy '.' locked svn: run 'svn cleanup' to remove locks (type 'svn help cleanup' for details) > svn clean up It's been 15 minutes and the svn clean up still isn't finished. I think it may have froze. So then I did the following: > ssh [email protected] > cd webappdir > svn update svn: This client is too old to work with working copy '.'; please get a newer Subversion client So now I can't update my webappdir because my /media/webapp is stuck on svn clean up, and my shared hosting server's svn client is out of date. I don't have privileges to install a new svn client on the shared hosting server. How do I get my svn update to work?

  Read the article

• VPN into multiple LAN Subnets

  - by Rain

  I need to figure out a way to allow access to two LAN subnets on a SonicWall NSA 220 through the built-in SonicWall GlobalVPN server. I've Googled and tried everything I can think of, but nothing has worked. The SonicWall NSA management web interface is also very unorganized; I'm probably missing something simple/obvious. There are two networks, called Network A and Network B for simplicity, with two different subnets. A SonicWall NSA 220 is the router/firewall/DHCP Server for Network A, which is plugged into the X2 port. Some other router is the router/firewall/DHCP server for Network B. Both of these networks need to be managed through a VPN connection. I setup the X3 interface on the SonicWall to have a static IP in the Network B subnet and plugged it in. Network A and Network B should not be able to access each other, which appears the be the default configuration. I then configured and enabled VPN. The SonicWall currently has the X1 interface setup with a subnet of 192.168.1.0/24 with a DHCP Server enabled, although it is not plugged in. When I VPN into the SonicWall, I get an IP address supplied by the DHCP Server on the X1 interface and I can access Network A remotely although I do not have access to Network B. How can I allow access to both Network A and Network B to VPN clients although keep devices on Network B from accessing Network A and vice-versa. Is there some way to create a VPN-only subnet (something like 10.100.0.0/24) on the SonicWall that can access Network A and Network B without changing the current network configuration or allowing devices on both netorks "see" each other? How would I go about setting this up? Diagram of the network: (Hopefully this kind of helps) WAN1 WAN2 | | [ SonicWall NSA 220 ]-(X3)-----------------[ Router 2 ] | | (X2) 192.168.2.0/24 10.1.1.0/24 Any help would be greatly appriciated!

  Read the article

• Pinging computer name in LAN results in public IP?

  - by Bob

  Hi, I recently introduced a new machine to my LAN. The computer name for this machine is 'server'. Historically I've been able to access machines from my home network (from a web browser or RDP) using the machine name and it resolves to a local IP address just fine. However, I can't seem to do this anymore. When I ping the computer name, I get the following: C:\Users\Robert>ping server Pinging server.router [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=24ms TTL=54 Reply from 67.215.65.132: bytes=32 time=23ms TTL=54 Reply from 67.215.65.132: bytes=32 time=24ms TTL=54 Reply from 67.215.65.132: bytes=32 time=24ms TTL=54 I notice also that it appends the 'router' suffix to my domain name for some reason. 'router' is the name of my router, obviously. I'm also using OpenDNS as my DNS provider (configured through my router so it gets passed down through DHCP). Why is this not working for me? Can someone explain how the DNS resolution should take place? For LAN resolution, it shouldn't go straight to OpenDNS. I thought that each Windows machine kept it's own sort of "mini DNS server" that knows about all machines on the local network and it first tries to resolve using that. Please let me know what I can do to get this working!

  Read the article

• iis not listening on port 80

  - by Holian

  Hello, We have server 2003 and ISA 2004 with IIS 6 on same machnie. Everything worked well till yesterday, when we try to make some new rule in ISA..but this is a long story... Unfortunatelly something happend with our intranet site. Our site is on the port 80, but if we try to open on this client machines then we got and error page (which error page is our provider): 403-forbidden; Remote host not listening, the remote host is not prepared to acceppt the connection request. On the server i can open the site with port 80. If i change the port number in the iis and try to open the site with the port, then works well. I try to shut down IIS and start apache with a simple page. On the server works well but in clients the problem is the same, so i think this is not an IIS related problem. In the ISA we have a web pub rule, with port 80, no auth. Im pulling out my hair, please help.

  Read the article

• Juniper SSG20 IP settings for email server

  - by codemonkie

  We have 5 usable external static IP addresses leased by our ISP: .49 to .53, where .49 is assigned to the Juniper SSG20 firewall and NATed for 172.16.10.0/24 .50 is assigned to a windows box for web server and domain controller .51 is assigned to another windows box with exchange server (domain: mycompany1.com) mx record is pointing to 20x.xx.xxx.51 Currently there is a policy set for all SMTP incoming traffic addressed to .51 forward to the NATed address of the exchange server box (private IP: 172.16.10.194). We can send and receive emails for both internal and external, but the gmail is saying mails from mycomany1.com is not sent from the same IP as the mx lookup however is from 20x.xx.xxx.49: Received-SPF: neutral (google.com: 20x.xx.xxx.49 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=20x.xx.xxx.49; Authentication-Results: mx.google.com; spf=neutral (google.com: 20x.xx.xxx.49 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] and the mx record in global dns space as well as in the domain controller .50 for mail.mycompany1.com is set to 20x.xx.xxx.51 My attempt to resolve the above issue is to Update the mx record from 20x.xx.xxx.51 to 20x.xx.xxx.49 Create a new VIP for SMTP traffic addressed to 20x.xx.xxx.49 to forward to 172.16.10.194 After my changes incoming email stopped working, I believe it has something to do with the Juniper setting that SMTP addressed to .49 is not forwarded to 172.16.10.194 Also, I have been wondering is it mandatory to assign an external static IP address to the Juniper firewall? Any helps appreciated. TIA

  Read the article

• IIS6 site using integrated authentication (NTLM) fails when accessed with Win7 / IE8

  - by Ciove

  Hi, I'm having pretty similar problems as described in case 139099, but the fix there doesn't seem to work for me. Here's the details: Server: Win2003Srv R2 SP2 (stadalone, not a member of a domain). IIS6, TCP/443 (https). Anonymous access disabled. Integrated Windows authentication enabled. Local useraccouts Each useraccount has own virtual folder with change access and read access to site root. The 'adsutil NTAuthenticationProviders "NTLM"' -thing set to site root and useraccount's virtual folder. Client: Win7 Enterprise Member of a AD-Domain IE8 Allows three login attepts then fails. Using [webservername][username] in the logon window (Windows security) Logon using other browsers (Chrome and Firefox) works OK. The Web services log shows one 401.2 and two 401.1 events. The Security Event log shows two events, first is Fauilure Audit (680), The second event is Fauilure Audit (529) with these details: Logon Failure: Reason: Unknown user name or bad password User Name: [username] Domain: [webservername] Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: [MyWorkstation] Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: [999.999.999.999] Source Port: 20089 Any ideas appreciated.

  Read the article

• How to simulate Apache [END] flag on a redirect?

  - by Javier Méndez

  For business-specific reasons I created the following rewrite rule for Apache 2.2.22 (mod_rewrite): RewriteRule /site/(\d+)/([^/]+)\.html /site/$2/$1 [R=301,L] Which if given an URL like: http://www.mydomain.com/site/0999/document.html Is translated to: http://www.mydomain.com/site/document/0999.html That's the expected scenario. However, there are documents which name are only numbers. So consider the following case: http://www.mydomain.com/site/0055/0666.html Gets translated to: http://www.mydomain.com/site/0666/0055.html Which also matches my rewrite rule pattern, so I end up with "The web page resulted in too many redirects" errors from browsers. I have researched for a long time, and haven't found "good" solutions. Things I tried: Use the [END] flag. Unfortunately is not available on my Apache version nor it works with redirects. Use %{ENV:REDIRECT_STATUS} on a RewriteCond clause to end the rewrite process (L). For some reason %{ENV:REDIRECT_STATUS} is empty all the times I tried. Add a response header with the Header clause if my rule matches and then check for that header (see: here for details). Seems that a) REDIRECT_addHeader is empty b) headers are can't be set on the 301 response explicitly. There is another alternative. I could set a query parameter to the redirect URL which indicates it comes from a redirect, but I don't like that solution as it seems to hacky. Is there a way to do exactly what the [END] flag does but in older Apache versions? Such as mine 2.2.22. Thanks!

  Read the article

< Previous Page | 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539  | Next Page >