steve care - Page 154 - Developer IT

Play Your Position Until the Play Breaks Down…then Do Whatever it Takes.

- by AjarnMark

If I didn’t know better, I would think that K. Brian Kelley (blog | twitter) has been listening in on conversations with my boss. In his recent blog post Successful Teams: Knowing When to Step Out of Your Role, Brian describes quite clearly a philosophy that my boss has been trying to get across to everyone in the department. We have been using sports analogies, like how important it is to play your position, until the play breaks down (such as a fumble) and then do whatever it takes it to cover each other / recover the ball / win. While we like having very skilled people who could do a lot of different tasks, it is important that you first do your assigned tasks, and only once those are complete, or failure of the larger mission is probable, do you consider walking away from them to help someone else with their responsibilities. The thing that you cannot afford, especially on a lean team, is the really nice guy who is always trying to help out other people, but in doing so, is never quite getting his own responsibilities taken care of. Yes, if the Running Back drops the football, you want any member of the team in the vicinity to jump on it, whether that is the leading blocker or the Quarterback. But until the fumble happens, you want the leading blocker to focus on doing his job, and block for the Running Back. If the blocker is doing any other job than his primary responsibility, you’re probably going to lose. This sounds logical enough, but it is really easy to go astray with the best of intentions. This is especially true on a small, tight-knit team, where it is really easy to get sucked into someone else’s task or problem, doubly so if you think you can do it better or faster than them. Now you are really setting yourself up for failure. The right thing is to let the other person do the job, even if it seems less efficient in the short-run, so that you can focus on the tasks which require your expertise. Don’t break formation…don’t abandon your assignment, until it is clear that mission failure is imminent, and even then, as Brian writes, it should be with the agreement of the mission leader. Thanks, Brian, for putting it so well. This has been distributed throughout our department.

Read the article

PHP `virtual()` with Apache MultiViews not working after upgrade to 12.04

- by Izzy

I use PHP's virtual() directive quite a lot on one of my sites, including central elements. This worked fine for the last ~10 years -- but after upgrading to 12.04 it somehow got broken. Example setup (simplified) To make it easier to understand, I simplify some things (contents). So say I need a HTML fragment like <P>For further instructions, please look <A HREF='foobar'>here</P> in multiple pages. 10 years ago, I used SSI for that, so it is put into a file in a central place -- so if e.g. the targeted URL changes, I only need to update it in one place. To serve multiple languages, I have Apache's MultiViews enabled -- and at $DOCUMENT_ROOT/central/ there are the files: foobar.html (English variant, and the default) foobar.html.de (German variant). Now in the PHP code, I simply placed: <? virtual("/central/foobar"); ?> and let Apache take care to deliver the correct language variant. The problem As said, this worked fine for about 10 years: German visitors got the German variant, all others the English (depending on their preferred language). But after upgrading to Ubuntu 12.04, it no longer worked: Either nothing was delivered from the virtual() command, or (in connection with framesets) it even ended up in binary gibberish. Trying to figure out what happens, I played with a lot of things. I first thought MultiViews was (somehow) not available anymore -- but calling http://<server>/central/foobar showed the right variant, depending on the configured language preferences. This also proved there was nothing wrong with file permissions. The error.log gave no clues either (no error message thrown). Finally, just as a "last ressort", I changed the PHP command to <? virtual("central/foobar.html"); ?> -- and that very same file was in fact included. But the language dependend stuff obviously did no longer work. Of course I tried to find some change (most likely in PHP's virtual() command), using Google a lot, and also searching the questions here -- unfortunately to no avail. Finally: The question Putting "design questions" aside (surely today I would design things differently -- but at least currently I miss the time to change that for a quite huge amount of pages): What can be done to make it work again? I surely missed something -- but I cannot figure out what...

Read the article

SQL SERVER – Storing 64-bit Unsigned Integer Value in Database

- by Pinal Dave

Here is a very interesting question I received in an email just another day. Some questions just are so good that it makes me wonder how come I have not faced it first hand. Anyway here is the question - “Pinal, I am migrating my database from MySQL to SQL Server and I have faced unique situation. I have been using Unsigned 64-bit integer in MySQL but when I try to migrate that column to SQL Server, I am facing an issue as there is no datatype which I find appropriate for my column. It is now too late to change the datatype and I need immediate solution. One chain of thought was to change the data type of the column from Unsigned 64-bit (BIGINT) to VARCHAR(n) but that will just change the data type for me such that I will face quite a lot of performance related issues in future. In SQL Server we also have the BIGINT data type but that is Signed 64-bit datatype. BIGINT datatype in SQL Server have range of -2^63 (-9,223,372,036,854,775,808) to 2^63-1 (9,223,372,036,854,775,807). However, my digit is much larger than this number. Is there anyway, I can store my big 64-bit Unsigned Integer without loosing much of the performance of by converting it to VARCHAR.” Very interesting question, for the sake of the argument, we can ask user that there should be no need of such a big number or if you are taking about identity column I really doubt that if your table will grow beyond this table. Here the real question which I found interesting was how to store 64-bit unsigned integer value in SQL Server without converting it to String data type. After thinking a bit, I found a fairly simple answer. I can use NUMERIC data type. I can use NUMERIC(20) datatype for 64-bit unsigned integer value, NUMERIC(10) datatype for 32-bit unsigned integer value and NUMERIC(5) datatype for 16-bit unsigned integer value. Numeric datatype supports 38 maximum of 38 precision. Now here is another thing to keep in mind. Using NUMERIC datatype will indeed accept the 64-bit unsigned integer but in future if you try to enter negative value, it will also allow the same. Hence, you will need to put any additional constraint over column to only accept positive integer there. Here is another big concern, SQL Server will store the number as numeric and will treat that as a positive integer for all the practical purpose. You will have to write in your application logic to interpret that as a 64-bit Unsigned Integer. On another side if you are using unsigned integers in your application, there are good chance that you already have logic taking care of the same. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL Datatype

Read the article

Aptronyms: fitting the profession to the name

- by Tony Davis

Writing a recent piece on the pains of index fragmentation, I found myself wondering why, in SQL Server, you can’t set the equivalent of a fill factor, on a heap table. I scratched my head…who might know? Phil Factor, of course! I approached him with a due sense of optimism only to find that not only did he not know, he also didn’t seem to care much either. I skulked off thinking how this may be the final nail in the coffin of nominative determinism. I’ve always wondered if there was anything in it, though. If your surname is Plumb or Leeks, is there even a tiny, extra percentage chance that you’ll end up fitting bathrooms? Some examples are quite common. I’m sure we’ve all met teachers called English or French, or lawyers called Judge or Laws. I’ve also known a Doctor called Coffin, a Urologist called Waterfall, and a Dentist called Dentith. Two personal favorites are Wolfgang Wolf who ended up managing the German Soccer team, Wolfsburg, and Edmund Akenhead, a Crossword Editor for The Times newspaper. Having forgiven Phil his earlier offhandedness, I asked him for if he knew of any notable examples. He had met the famous Dr. Batty and Dr. Nutter, both Psychiatrists, knew undertakers called Death and Stiff, had read a book by Frederick Page-Turner, and suppressed a giggle at the idea of a feminist called Gurley-Brown. He even managed to better my Urologist example, citing the article on incontinence in the British Journal of Urology (vol.49, pp.173-176, 1977) by A. J. Splatt and D. Weedon. What, however, if you were keen to gently nudge your child down the path to a career in IT? What name would you choose? Subtlety probably doesn’t really work, although in a recent interview, Rodney Landrum did congratulate PowerShell MVP Max Trinidad on being named after a SQL function. Grant “The Memory” Fritchey (OK, I made up that nickname) doesn’t do badly either. Some surnames, seem to offer a natural head start, although I know of no members of the Page-Reid clan in the profession. There are certainly families with the Table surname, although sadly, Little Bobby Tables was merely a legend by xkcd. A member of the well-known Key family would need to name their son Primary, or maybe live abroad, to make their mark. Nominate your examples of people seemingly destined, by name, for their chosen profession (extra points for IT). The best three will receive a prize. Cheers, Tony.

Read the article

Why a graduate program in South Africa?

- by anca.rosu

South Africa, like many other countries, is desperate for skills. Good, solid, technical skills – together with a get-up-and-go attitude – and the desire to work for a world-class organization that is leading the way! In addition, we have made a commitment in South Africa that we need to transform our organization and develop and empower Black individuals who historically have not had the opportunity to participate in the global economy. It is through this investment in our country's people that we contribute to the development of a nation capable of competing on the global stage. This makes for an exciting recipe! We have: Plenty of young and talented individuals who are eager to get stuck in and learn. Formal, recognized qualifications that form the basis for further development. A huge big global organization – Oracle – that is committed to developing these graduates and giving them an opportunity that is out of this world! Mix the above ‘ingredients’ together Tackle and remove potential “lumps & bumps” along the way as we learn and grow together Nurture and care for each other in a warm but tough environment What have we achieved? In most cases, the outcome is an awesome bunch of new talent that is well equipped to face the IT world. Where we have the opportunity and suitable headcount available to employ these graduates at Oracle we snap them up – alternatively our business partners and customers are always eager to recruit Oracle graduates into their organizations! These individuals go through real-life work place experience whilst at Oracle. In some cases they get to travel internationally. The excitement and buzz gets into their system and their blood becomes truly RED! Oracle RED! This is valuable talent and expertise to have in our eco-system and it’s an exciting program to be a part of not only as a graduate but as an Oracle employee too! If you have any questions related to this article feel free to contact [email protected]. You can find our job opportunities via http://campus.oracle.com. Technorati Tags: South Africa,technical skills,graduate program,opportunity,global organization,new talent

Read the article

Repository and Ticket management in a Windows Environment

- by saifkhan

I’ve been using AxoSoft’s bug tracking application for a while, although and excellent piece of software I had some issues with it · It was SLOOOW (both desktop and web). I don’t care what Axosoft says, I tired multiple servers etc. I’ve been long enough in this field to tell you when something is not right with an app. · The cost! It’s not feasible for a small team. I must say though, that they have some nice features which are not commonly found on other bug tracking software. I wouldn’t go on to list any here. I would prefer you download and try their app and see for yourself. In my quest to find a replacement, I tried a few. The successor had to satisfy the following · A 99.99% Windows Environment. · Bug Tracking. · Ticket Management (power users and project managers can open tickets on projects). · Repository (I decided to merge bug tracking and repository to get my team to be more productive). · Unlimited users. · Cost. Being the head of IT security for the firm I work for, making the decision to move data offsite was a hard decision to make, but turned out to be one I am not regretting so far. My choice was down to Altassian JIRA and codebaseHQ. I ended up going with the latter… (I still love the greenhopper from Altassian…its freaking cool!) CodebaseHQ is nice and simple and has all the features I needed. I’ve been using them for a few months now and very happy. Their pricing…well, see for yourself. I was also able to get our SVN data… (Yes, SVN! I don’t go near the Visual Sourcesafe thing…it’s not that safe (pardon the pun). I am hearing some nice things about TFS 2010) over to codebaseHQ. We use VisualSVN to access repositories. …so if you are a Windows developer (or team) codebaseHQ is worth checking out!

Read the article

Career Advice: finding challenging work in software and web development

- by dianovich

Having left my physics degree early, I started out in the realm of web design / front end web development and was able to get work quite quickly. I moved on to spend a chunk of my time on servers and gained experience with frameworks like Wordpress and Drupal, then the likes of Codeigniter and CakePHP and became comfortable in Debian-based and RHEL/CentOS environments. I ventured in to iOS development and published a couple of native apps to the app store too! I have started to spend a good deal of my time writing Python and have invested a little time in Django. The problem is, I still spend a fair chunk of my time doing more front end web development (writing markup and CSS for site themes, design-lead JavaScript, small applications for which application architecture and software engineering are relatively unimportant or too time consuming to invest in) in my job. What I want to do is really exercise the systematic/logical portion of my brain and tackle challenging problems on a daily basis. I want to have to care about big-oh running times, modularity in software, DRY, performance tuning and development methodologies. I want to work for a firm whose clients say: "Yes, these things are important to us and we'll pay you to get them right." But it is difficult: I have no formal training and am potentially becoming a jack of all trades. Not that being a jack of many trades is necessarily a bad thing, but the scope of work I find myself involved in is far too broad. And, there are only so many hours in a day outside of work! My question is: where do I go from here? I am starting to work on a few open source projects and have started to publish content to my blog. But this isn't likely to make it past the recruitment consultants and HR departments of many-a-firm. And I do not, for example, work in a team that practices agile methodologies, so how do I get work in such a team to gain experience? While I have been responsible for implementing version control and some solid working practices into our current environment, there is only so far I can go in this context. What would convince you that i'm worth taking a risk? What would convince you that i'll have caught up the other guys in your employ in next to no time?

Read the article

Send raw data to USB parallel port after upgrading to 11.10

- by zaphod

I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

Read the article

Designing for an algorithm that reports progress

- by Stefano Borini

I have an iterative algorithm and I want to print the progress. However, I may also want it not to print any information, or to print it in a different way, or do other logic. In an object oriented language, I would perform the following solutions: Solution 1: virtual method have the algorithm class MyAlgoClass which implements the algo. The class also implements a virtual reportIteration(iterInfo) method which is empty and can be reimplemented. Subclass the MyAlgoClass and override reportIteration so that it does what it needs to do. This solution allows you to carry additional information (for example, the file unit) in the reimplemented class. I don't like this method because it clumps together two functionalities that may be unrelated, but in GUI apps it may be ok. Solution 2: observer pattern the algorithm class has a register(Observer) method, keeps a list of the registered observers and takes care of calling notify() on each of them. Observer::notify() needs a way to get the information from the Subject, so it either has two parameters, one with the Subject and the other with the data the Subject may pass, or just the Subject and the Observer is now in charge of querying it to fetch the relevant information. Solution 3: callbacks I tend to see the callback method as a lightweight observer. Instead of passing an object, you pass a callback, which may be a plain function, but also an instance method in those languages that allow it (for example, in python you can because passing an instance method will remain bound to the instance). C++ however does not allow it, because if you pass a pointer to an instance method, this will not be defined. Please correct me on this regard, my C++ is quite old. The problem with callbacks is that generally you have to pass them together with the data you want the callback to be invoked with. Callbacks don't store state, so you have to pass both the callback and the state to the Subject in order to find it at callback execution, together with any additional data the Subject may provide about the event is reporting. Question My question is relative to the fact that I need to implement the opening problem in a language that is not object oriented, namely Fortran 95, and I am fighting with my usual reasoning which is based on python assumptions and style. I think that in Fortran the concept is similar to C, with the additional trouble that in C you can store a function pointer, while in Fortran 95 you can only pass it around. Do you have any comments, suggestions, tips, and quirks on this regard (in C, C++, Fortran and python, but also in any other language, so to have a comparison of language features that can be exploited on this regard) on how to design for an algorithm that must report progress to some external entity, using state from both the algorithm and the external entity ?

Read the article

Development-led security vs administration-led security in a software product?

- by haylem

There are cases where you have the opportunity, as a developer, to enforce stricter security features and protections on a software, though they could very well be managed at an environmental level (ie, the operating system would take care of it). Where would you say you draw the line, and what elements do you factor in your decision? Concrete Examples User Management is the OS's responsibility Not exactly meant as a security feature, but in a similar case Google Chrome used to not allow separate profiles. The invoked reason (though it now supports multiple profiles for a same OS user) used to be that user management was the operating system's responsibility. Disabling Web-Form Fields A recurrent request I see addressed online is to have auto-completion be disabled on form fields. Auto-completion didn't exist in old browsers, and was a welcome feature at the time it was introduced for people who needed to fill in forms often. But it also brought in some security concerns, and so some browsers started to implement, on top of the (obviously needed) setting in their own preference/customization panel, an autocomplete attribute for form or input fields. And this has now been introduced into the upcoming HTML5 standard. For browsers that do not listen to this attribute, strange hacks* are offered, like generating unique IDs and names for fields to avoid them from being suggested in future forms (which comes with another herd of issues, like polluting your local auto-fill cache and not preventing a password from being stored in it, but instead probably duplicating its occurences). In this particular case, and others, I'd argue that this is a user setting and that it's the user's desire and the user's responsibility to enable or disable auto-fill (by disabling the feature altogether). And if it is based on an internal policy and security requirement in a corporate environment, then substitute the user for the administrator in the above. I assume it could be counter-argued that the user may want to access non-critical applications (or sites) with this handy feature enabled, and critical applications with this feature disabled. But then I'd think that's what security zones are for (in some browsers), or the sign that you need a more secure (and dedicated) environment / account to use these applications. * I obviously don't deny the ingeniosity of the people who were forced to find workarounds, just the necessity of said workarounds. Questions That was a tad long-winded, so I guess my questions are: Would you in general consider it to be the application's (hence, the developer's) responsiblity? Where do you draw the line, if not in the "general" case?

Read the article

Why Healthcare Today Needs BPM and SOA by Avio

- by JuergenKress

Within the past couple years, the Patient Protection and Affordable Care Act has led to significant changes in the healthcare industry. A highly-complex supply chain between patients, providers, buyers and insurance companies has led to a lack of overall collaboration when it comes to processes. The first open enrollment deadline for products on the Health Insurance Exchange has passed. So what now? Let’s take a brief look at how things have changed and what organizations can do to stay in (and ahead of) the game. New requirements, new processes Organizations that have not adapted processes to meet new regulatory requirements will fall further behind. New regulatory requirements effectively make some legacy applications obsolete, require batch process to move to real-time, and more. Business Process Management (BPM) can help organizations bring data processes in line while helping IT redesign processes rather than change code or replace existing applications. BPM fills in application gaps and links critical information systems for a more visible, efficient and auditable organization. Social and mobile solutions BPM technology also facilitates social and mobile solutions that can help meet new needs. Patients are dependent on a network of doctors, pharmacists, families and others. Social solutions can connect members of the patient’s community in ways never seen before - enabling real-time, relevant communication. Likewise, mobile technology supports social solutions, and BPM is the most efficient way to make processes simple and role-based. It unties medical professionals from their offices by enabling them to access timely information and alerts anywhere. Why SOA is also needed Integrating BPM with Service-Oriented Architecture (SOA) also plays a critical role in the development of healthcare solutions that work. SOA can create a single end-to-end process, integrate applications and move them into a common workflow. While SOA enables the reutilization of existing IT infrastructure, BPM supports the process optimization, monitoring and social aspects. SOA and BPM applications support business analysts as they model, create and monitor processes - providing real-time insight and a unified workflow of process activities. Read “New” Solutions for a New Healthcare Landscape on our blog to learn more. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Avio,Healthcare,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

Read the article

Is the Joel Test really a good gauging tool?

- by henry

I just learned about the Joel Test. I have been computer programmer for 22 years, but somehow I never heard about it before. I consider my best job so far to be this small investment managing company with 30 employees and only three people in the IT department. I am no longer with them, but I had being working there for five years – my longest streak with any given company. To my surprise they scored extremely poor on the Joel Test. The only two questions I would answer “yes” are #4: Do you have a bug database? And #9: Do you use the best tools money can buy? Everything else is either “sometimes” or straight “no”. Here is what I liked about the company however: Good pay. They bragged about it to my face, and I bragged about it to their face, so it was almost like a family environment. I always knew the big picture. When writing code to solve a particular problem there were no ambiguity about the business nature of that problem. Even though we did not always had written specifications we could ask business users a question anytime, often yelling it across the floor. I could even talk to executives any time I felt like doing it: no appointment necessary. Immediate feedback. Once we implement a solution and make business users happy they immediately let us know that, we (programmers) become heroes of the moment. No red tape. I could always buy any tools I deemed necessary, and design solutions the way my professional judgment dictates. Flexibility. If I had mid-day dental appointment that is near my house rather than near the office, I would send email to the company: "FYI: I work from home today". As long as one of three IT guys was on the floor (to help traders in case their monitors go dark) they did not care where two others were. So the question thus becomes: How valuable is the Joel Test? Why bother with it?

Read the article

When following SRP, how should I deal with validating and saving entities?

- by Kristof Claes

I've been reading Clean Code and various online articles about SOLID lately, and the more I read about it, the more I feel like I don't know anything. Let's say I'm building a web application using ASP.NET MVC 3. Let's say I have a UsersController with a Create action like this: public class UsersController : Controller { public ActionResult Create(CreateUserViewModel viewModel) { } } In that action method I want to save a user to the database if the data that was entered is valid. Now, according to the Single Responsibility Principle an object should have a single responsibility, and that responsibility should be entirely encapsulated by the class. All its services should be narrowly aligned with that responsibility. Since validation and saving to the database are two separate responsibilities, I guess I should create to separate class to handle them like this: public class UsersController : Controller { private ICreateUserValidator validator; private IUserService service; public UsersController(ICreateUserValidator validator, IUserService service) { this.validator = validator; this.service= service; } public ActionResult Create(CreateUserViewModel viewModel) { ValidationResult result = validator.IsValid(viewModel); if (result.IsValid) { service.CreateUser(viewModel); return RedirectToAction("Index"); } else { foreach (var errorMessage in result.ErrorMessages) { ModelState.AddModelError(String.Empty, errorMessage); } return View(viewModel); } } } That makes some sense to me, but I'm not at all sure that this is the right way to handle things like this. It is for example entirely possible to pass an invalid instance of CreateUserViewModel to the IUserService class. I know I could use the built in DataAnnotations, but what when they aren't enough? Image that my ICreateUserValidator checks the database to see if there already is another user with the same name... Another option is to let the IUserService take care of the validation like this: public class UserService : IUserService { private ICreateUserValidator validator; public UserService(ICreateUserValidator validator) { this.validator = validator; } public ValidationResult CreateUser(CreateUserViewModel viewModel) { var result = validator.IsValid(viewModel); if (result.IsValid) { // Save the user } return result; } } But I feel I'm violating the Single Responsibility Principle here. How should I deal with something like this?

Read the article

How to port animation from one skeleton to another?

- by shawn

While I need to do this in a Blender3D modeler script, the math should be similar for other modelers or realtime engines. Blender3D specific terminology: Armature = skeleton EditBone = rest pose bone (stores the rest pose matrix) PoseBone = can store a different pose (animation matrix) for each frame of your animation I need to share animations (Blender Actions) between Armatures which have EditBones with same names and which have the same positions, but can have different (rest pose) angles and scales. Plus the Armatures might have different bone hierarchy (bone parenting/ no bone parenting). Why I need this: I've made an importer/exporter for a 3d format for a game. The format doesn't store enough info to connect/parent the bones, which makes posing/animating character models in a 3d modeller nearly impossible (original model files for the 3d modeler don't exist, this is for modding). As there are only 2 character skeleton types in the game, I decided to optionally allow to generate the bone from a hardcoded data in the model importer and undo that in the exporter. This allows to easily pose the model for checking weights, easily create weights, makes it easier for Blender to generate automatic weights and of course makes animating possible. This worked perfectly: the importer optionally generated the Armature itself and the exporter removed those changes, so the exported model works with existing animations in the game. But now I'm writing an importer and exporter for the game's animation format and here come the problems of: Trying to make original animations work in Blender with my "custom" (modified) Armature Trying to make animations created by using the "custom" (modified) Armature work with the original models in the game (and Blender). Constraints or bone snapping inside Blender won't work as they don't care that the bones have different angles in the rest pose, they will still face the same direction. It seems I just need to get the "difference" between the EditBone matrices of all EditBones for the two Armatures somehow and apply that difference to PoseBone matrices of all PoseBones, for all frames of my animation. I need to know how to get that difference and how to apply it. BTW, PoseBone matrices are relative to rest pose, they are by default [1.000000, 0.000000, 0.000000, 0.000000](matrix [row 0]) [0.000000, 1.000000, 0.000000, 0.000000](matrix [row 1]) [0.000000, 0.000000, 1.000000, 0.000000](matrix [row 2]) [0.000000, 0.000000, 0.000000, 1.000000](matrix [row 3]) So the question is: How to get the difference between two bone (EditBone) matrices to apply that difference to the animation matrices (PoseBone matrices)? Please be easy on the matrix math.

Read the article

Create Outlook Appointments from PowerShell

- by BuckWoody

I've been toying around with a script to create a special set of calendar objects in Outlook that show when my SQL Server Agent Jobs are scheduled to run. I haven't finished yet, but I thought I would share the part that creates the Outlook Appointments.I have yet to fill a variable with the start and end times, and then loop through that to create the appointments. I'm thinking I'll make the script below into a function, and feed it those variables in a loop. The script below creates a whole new Calendar Folder in Outlook called "SQL Server Agent Jobs". I also use categories quite a bit, so you'll see that too. Caution: If you plan to play with this script, do it on an isolated workstation, not on your "regular" Outlook calendar. Otherwise, you'll have lots of appointments in there that you don't care about! # Add a new calendar item to a new Outlook folder called "SQL Server Agent Jobs" $outlook = new-object -com Outlook.Application $calendar = $outlook.Session.folders.Item(1).Folders.Item("SQL Server Agent Jobs") $appt = $calendar.Items.Add(1) # == olAppointmentItem $appt.Start = [datetime]"03/11/2010 11:00" $appt.End = [datetime]"03/11/2009 12:00" $appt.Subject = "JobName" $appt.Location = "ServerName" $appt.Body = "Job Details" $appt.Categories = "SQL server Agent Job" $appt.Save() Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Partner Blog Series: PwC Perspectives - The Gotchas, The Do's and Don'ts for IDM Implementations

- by Tanu Sood

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableMediumList1Accent6 {mso-style-name:"Medium List 1 - Accent 6"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:65; mso-style-unhide:no; border-top:solid #E0301E 1.0pt; mso-border-top-themecolor:accent6; border-left:none; border-bottom:solid #E0301E 1.0pt; mso-border-bottom-themecolor:accent6; border-right:none; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Georgia","serif"; color:black; mso-themecolor:text1; mso-ansi-language:EN-GB;} table.MsoTableMediumList1Accent6FirstRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:cell-none; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; font-family:"Verdana","sans-serif"; mso-ascii-font-family:Georgia; mso-ascii-theme-font:major-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:major-fareast; mso-hansi-font-family:Georgia; mso-hansi-theme-font:major-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:major-bidi;} table.MsoTableMediumList1Accent6LastRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; color:#968C6D; mso-themecolor:text2; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6FirstCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-column; mso-style-priority:65; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6LastCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6OddColumn {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} table.MsoTableMediumList1Accent6OddRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableMediumList1Accent6 {mso-style-name:"Medium List 1 - Accent 6"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:65; mso-style-unhide:no; border-top:solid #E0301E 1.0pt; mso-border-top-themecolor:accent6; border-left:none; border-bottom:solid #E0301E 1.0pt; mso-border-bottom-themecolor:accent6; border-right:none; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Georgia","serif"; color:black; mso-themecolor:text1; mso-ansi-language:EN-GB;} table.MsoTableMediumList1Accent6FirstRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:cell-none; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; font-family:"Arial Narrow","sans-serif"; mso-ascii-font-family:Georgia; mso-ascii-theme-font:major-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:major-fareast; mso-hansi-font-family:Georgia; mso-hansi-theme-font:major-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:major-bidi;} table.MsoTableMediumList1Accent6LastRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; color:#968C6D; mso-themecolor:text2; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6FirstCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-column; mso-style-priority:65; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6LastCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6OddColumn {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} table.MsoTableMediumList1Accent6OddRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} It is generally accepted among business communities that technology by itself is not a silver bullet to all problems, but when it is combined with leading practices, strategy, careful planning and execution, it can create a recipe for success. This post attempts to highlight some of the best practices along with dos & don’ts that our practice has accumulated over the years in the identity & access management space in general, and also in the context of R2, in particular. Best Practices The following section illustrates the leading practices in “How” to plan, implement and sustain a successful OIM deployment, based on our collective experience. Planning is critical, but often overlooked A common approach to planning an IAM program that we identify with our clients is the three step process involving a current state assessment, a future state roadmap and an executable strategy to get there. It is extremely beneficial for clients to assess their current IAM state, perform gap analysis, document the recommended controls to address the gaps, align future state roadmap to business initiatives and get buy in from all stakeholders involved to improve the chances of success. When designing an enterprise-wide solution, the scalability of the technology must accommodate the future growth of the enterprise and the projected identity transactions over several years. Aligning the implementation schedule of OIM to related information technology projects increases the chances of success. As a baseline, it is recommended to match hardware specifications to the sizing guide for R2 published by Oracle. Adherence to this will help ensure that the hardware used to support OIM will not become a bottleneck as the adoption of new services increases. If your Organization has numerous connected applications that rely on reconciliation to synchronize the access data into OIM, consider hosting dedicated instances to handle reconciliation. Finally, ensure the use of clustered environment for development and have at least three total environments to help facilitate a controlled migration to production. If your Organization is planning to implement role based access control, we recommend performing a role mining exercise and consolidate your enterprise roles to keep them manageable. In addition, many Organizations have multiple approval flows to control access to critical roles, applications and entitlements. If your Organization falls into this category, we highly recommend that you limit the number of approval workflows to a small set. Most Organizations have operations managed across data centers with backend database synchronization, if your Organization falls into this category, ensure that the overall latency between the datacenters when replicating the databases is less than ten milliseconds to ensure that there are no front office performance impacts. Ingredients for a successful implementation During the development phase of your project, there are a number of guidelines that can be followed to help increase the chances for success. Most implementations cannot be completed without the use of customizations. If your implementation requires this, it’s a good practice to perform code reviews to help ensure quality and reduce code bottlenecks related to performance. We have observed at our clients that the development process works best when team members adhere to coding leading practices. Plan for time to correct coding defects and ensure developers are empowered to report their own bugs for maximum transparency. Many organizations struggle with defining a consistent approach to managing logs. This is particularly important due to the amount of information that can be logged by OIM. We recommend Oracle Diagnostics Logging (ODL) as an alternative to be used for logging. ODL allows log files to be formatted in XML for easy parsing and does not require a server restart when the log levels are changed during troubleshooting. Testing is a vital part of any large project, and an OIM R2 implementation is no exception. We suggest that at least one lower environment should use production-like data and connectors. Configurations should match as closely as possible. For example, use secure channels between OIM and target platforms in pre-production environments to test the configurations, the migration processes of certificates, and the additional overhead that encryption could impose. Finally, we ask our clients to perform database backups regularly and before any major change event, such as a patch or migration between environments. In the lowest environments, we recommend to have at least a weekly backup in order to prevent significant loss of time and effort. Similarly, if your organization is using virtual machines for one or more of the environments, it is recommended to take frequent snapshots so that rollbacks can occur in the event of improper configuration. Operate & sustain the solution to derive maximum benefits When migrating OIM R2 to production, it is important to perform certain activities that will help achieve a smoother transition. At our clients, we have seen that splitting the OIM tables into their own tablespaces by categories (physical tables, indexes, etc.) can help manage database growth effectively. If we notice that a client hasn’t enabled the Oracle-recommended indexing in the applicable database, we strongly suggest doing so to improve performance. Additionally, we work with our clients to make sure that the audit level is set to fit the organization’s auditing needs and sometimes even allocate UPA tables and indexes into their own table-space for better maintenance. Finally, many of our clients have set up schedules for reconciliation tables to be archived at regular intervals in order to keep the size of the database(s) reasonable and result in optimal database performance. For our clients that anticipate availability issues with target applications, we strongly encourage the use of the offline provisioning capabilities of OIM R2. This reduces the provisioning process for a given target application dependency on target availability and help avoid broken workflows. To account for this and other abnormalities, we also advocate that OIM’s monitoring controls be configured to alert administrators on any abnormal situations. Within OIM R2, we have begun advising our clients to utilize the ‘profile’ feature to encapsulate multiple commonly requested accounts, roles, and/or entitlements into a single item. By setting up a number of profiles that can be searched for and used, users will spend less time performing the same exact steps for common tasks. We advise our clients to follow the Oracle recommended guides for database and application server tuning which provides a good baseline configuration. It offers guidance on database connection pools, connection timeouts, user interface threads and proper handling of adapters/plug-ins. All of these can be important configurations that will allow faster provisioning and web page response times. Many of our clients have begun to recognize the value of data mining and a remediation process during the initial phases of an implementation (to help ensure high quality data gets loaded) and beyond (to support ongoing maintenance and business-as-usual processes). A successful program always begins with identifying the data elements and assigning a classification level based on criticality, risk, and availability. It should finish by following through with a remediation process. Dos & Don’ts Here are the most common dos and don'ts that we socialize with our clients, derived from our experience implementing the solution. Dos Don’ts Scope the project into phases with realistic goals. Look for quick wins to show success and value to the stake holders. Avoid “boiling the ocean” and trying to integrate all enterprise applications in the first phase. Establish an enterprise ID (universal unique ID across the enterprise) earlier in the program. Avoid major UI customizations that require code changes. Have a plan in place to patch during the project, which helps alleviate any major issues or roadblocks (product and database). Avoid publishing all the target entitlements if you don't anticipate their usage during access request. Assess your current state and prepare a roadmap to address your operations, tactical and strategic goals, align it with your business priorities. Avoid integrating non-production environments with your production target systems. Defer complex integrations to the later phases and take advantage of lessons learned from previous phases Avoid creating multiple accounts for the same user on the same system, if there is an opportunity to do so. Have an identity and access data quality initiative built into your plan to identify and remediate data related issues early on. Avoid creating complex approval workflows that would negative impact productivity and SLAs. Identify the owner of the identity systems with fair IdM knowledge and empower them with authority to make product related decisions. This will help ensure overcome any design hurdles. Avoid creating complex designs that are not sustainable long term and would need major overhaul during upgrades. Shadow your internal or external consulting resources during the implementation to build the necessary product skills needed to operate and sustain the solution. Avoid treating IAM as a point solution and have appropriate level of communication and training plan for the IT and business users alike. Conclusion In our experience, Identity programs will struggle with scope, proper resourcing, and more. We suggest that companies consider the suggestions discussed in this post and leverage them to help enable their identity and access program. This concludes PwC blog series on R2 for the month and we sincerely hope that the information we have shared thus far has been beneficial. For more information or if you have questions, you can reach out to Rex Thexton, Senior Managing Director, PwC and or Dharma Padala, Director, PwC. We look forward to hearing from you. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Meet the Writers: Dharma Padala is a Director in the Advisory Security practice within PwC. He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors. Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Praveen Krishna is a Manager in the Advisory Security practice within PwC. Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries. His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Scott MacDonald is a Director in the Advisory Security practice within PwC. He has consulted for several clients across multiple industries including financial services, health care, automotive and retail. Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC. He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL).

Read the article

Memento with optional state?

- by Korey Hinton

EDIT: As pointed out by Steve Evers and pdr, I am not correctly implementing the Memento pattern, my design is actually State pattern. Menu Program I built a console-based menu program with multiple levels that selects a particular test to run. Each level more precisely describes the operation. At any level you can type back to go back one level (memento). Level 1: Server Type? [1] Server A [2] Server B Level 2: Server environment? [1] test [2] production Level 3: Test type? [1] load [2] unit Level 4: Data Collection? [1] Legal docs [2] Corporate docs Level 4.5 (optional): Load Test Type [2] Multi TIF [2] Single PDF Level 5: Command Type? [1] Move [2] Copy [3] Remove [4] Custom Level 6: Enter a keyword [setup, cleanup, run] Design States PROBLEM: Right now the STATES enum is the determining factor as to what state is BACK and what state is NEXT yet it knows nothing about what the current memento state is. Has anyone experienced a similar issue and found an effective way to handle mementos with optional state? static enum STATES { SERVER, ENVIRONMENT, TEST_TYPE, COLLECTION, COMMAND_TYPE, KEYWORD, FINISHED } Possible Solution (Not-flexible) In reference to my code below, every case statement in the Menu class could check the state of currentMemo and then set the STATE (enum) accordingly to pass to the Builder. However, this doesn't seem flexible very flexible to change and I'm struggling to see an effective way refactor the design. class Menu extends StateConscious { private State state; private Scanner reader; private ServerUtils utility; Menu() { state = new State(); reader = new Scanner(System.in); utility = new ServerUtils(); } // Recurring menu logic public void startPromptingLoop() { List<State> states = new ArrayList<>(); states.add(new State()); boolean redoInput = false; boolean userIsDone = false; while (true) { // get Memento from last loop Memento currentMemento = states.get(states.size() - 1) .saveMemento(); if (currentMemento == null) currentMemento = new Memento.Builder(0).build(); if (!redoInput) System.out.println(currentMemento.prompt); redoInput = false; // prepare Memento for next loop Memento nextMemento = null; STATES state = STATES.values()[states.size() - 1]; // get user input String selection = reader.nextLine(); switch (selection) { case "exit": reader.close(); return; // only escape case "quit": nextMemento = new Memento.Builder(first(), currentMemento, selection).build(); states.clear(); break; case "back": nextMemento = new Memento.Builder(previous(state), currentMemento, selection).build(); if (states.size() <= 1) { states.remove(0); } else { states.remove(states.size() - 1); states.remove(states.size() - 1); } break; case "1": nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); break; case "2": nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); break; case "3": nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); break; case "4": nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); break; default: if (state.equals(STATES.CATEGORY)) { String command = selection; System.out.println("Executing " + command + " command on: " + currentMemento.type + " " + currentMemento.environment); utility.executeCommand(currentMemento.nickname, command); userIsDone = true; states.clear(); nextMemento = new Memento.Builder(first(), currentMemento, selection).build(); } else if (state.equals(STATES.KEYWORD)) { nextMemento = new Memento.Builder(next(state), currentMemento, selection).build(); states.clear(); nextMemento = new Memento.Builder(first(), currentMemento, selection).build(); } else { redoInput = true; System.out.println("give it another try"); continue; } break; } if (userIsDone) { // start the recurring menu over from the beginning for (int i = 0; i < states.size(); i++) { if (i != 0) { states.remove(i); // remove all except first } } reader = new Scanner(System.in); this.state = new State(); userIsDone = false; } if (!redoInput) { this.state.restoreMemento(nextMemento); states.add(this.state); } } } }

Read the article

Evaluating Scrum - is it okay to have people with multiple roles in a Scrum team?

- by Wayne M

I'm evaluating some Agile-style methodologies for possible introduction to my team. With Scrum, is it allowable to have the same person perform multiple roles? We have a small team of four developers and a web designer; we don't really have a lead (I fulfill this role), QA testers or business analysts, and all of our development tasks come from the CIO. Automated testing is seen as a total waste of time, and everything focuses on speed and not quality. What will happen is the CIO will come up with a development task (whether a feature or a bug) and give it to a developer (not to the whole team, to an individual, often in private or out of the blue) who is then expected to get it completed. The CIO doesn't gather requirements beyond the initial idea (and this has bitten us before as we'll implement something only to find out that none of the end users can use the feature, because they weren't consulted or even informed about it before we developed it, and in a panic we'll be told to revert the change) but requires say in/approval of everything that we do. First things first, is a Scrum style something to consider to introduce some standards and practices? From reading, Scrum seems to rely on a bit more trust and communication and focuses more on project management than on development, which is something we are completely devoid of as we don't have any semblance of project management at present. Second, if it can work is it unreasonable for someone, let's say myself, to act as both ScrumMaster and a developer? Or for a developer to also be the Product Owner (although chances are this will be the CIO, who isn't a developer)? I realize the Scrum Master and the Product Owner should be different people but at the same time I don't think we have anyone who has the qualities of a Product Owner (chances are it would turn into a "I need all these stories, I don't care how but get it done" type of deal and/or any freeze would be unfrozen on a whim). It seems to me that I might need to pick and choose pieces of Scrum/XP/Lean to compensate for how things are done currently, as it's highly unlikely that the mentality can be changed; for instance Pair Programming would never fly (seen as a waste, you get half the tasks done if you need two people for everything), TDD would be a hard sell, but short cycles would be welcomed.

Read the article

JavaOne Latin America Opening Keynotes

- by Tori Wieldt

Originally published on blogs.oracle.com/javaone It was a great first day at JavaOne Brazil, which included the Java Strategy and Java Technical keynotes. Henrik Stahl, Senior Director, Product Management for Java opened the keynotes by saying that this is the third year for JavaOne Latin America. He explained, "You know what they say, the first time doesn't count, the second time is a habit and the third time it's a tradition!" He mentioned that he was thrilled that this is largest JavaOne in Brazil to date, and he wants next year to be larger. He said that Oracle knows Latin America is an important hub for development. "We continually come back to Latin America because of the dedication the community has with driving the continued innovation for Java," he said. Stahl explained that Oracle and the Java community must continue to innovate and Make the Future Java together. The success of Java depends on three important factors: technological innovation, Oracle as a strong steward of Java, and community participation. "The Latin American Java Community (especially in Brazil) is a shining example of how to be positive contributor to Java," Stahl said. Next, George Saab, VP software dev, Java Platform Group at Oracle, discussed some of the recent and upcoming changes to Java. "In addition to the incremental improvements to Java 7, we have also increased the set of platforms supported by Oracle from Linux, Windows, and Solaris to now also include Mac OS X and Linux/ARM for ARM-based PCs such as the Raspberry Pi and emerging ARM based microservers." Saab announced that EA builds for Linux ARM Hard Float ABI will be available by the end of the year. Staffan Friberg, Product Manager, Java Platform Group, provided an overview of some of the language coming in Java 8, including Lambda, remove of PermGen, improved data and time APIs and improved security, Java 8 development is moving along. He reminded the audience that they can go to OpenJDK to see this development being done in real-time, and that there are weekly early access builds of OracleJDK 8 that developers can download and try today. Judson Althoff, Senior Vice President, Worldwide Alliances and Channels and Embedded Sales, was invited to the stage, and the audience was told that "even though he is wearing a suit, he is still pretty technical." Althoff started off with a bang: "The Internet of Things is on a collision course with big data and this is a huge opportunity for developers." For example, Althoff said, today cars are more a data device than a mechanical device. A car embedded with sensors for fuel efficiency, temperature, tire pressure, etc. can generate a petabyte of data A DAY. There are similar examples in healthcare (patient monitoring and privacy requirements creates a complex data problem) and transportation management (sending a package around the world with sensors for humidity, temperature and light). Althoff then brought on stage representatives from three companies that are successful with Java today, first Axel Hansmann, VP Strategy & Marketing Communications, Cinterion. Mr. Hansmann explained that Cinterion, a market leader in Latin America, enables M2M services with Java. At JavaOne San Francisco, Cinterion launched the EHS5, the smallest 3g solderable module, with Java installed on it. This provides Original Equipment Manufacturers (OEMs) with a cost effective, flexible platform for bringing advanced M2M technology to market.Next, Steve Nelson, Director of Marketing for the Americas, at Freescale explained that Freescale is #1 in Embedded Processors in Wired and Wireless Communications, and #1 in Automotive Semiconductors in the Americas. He said that Java provides a mature, proven platform that is uniquely suited to meet the requirements of almost any type of embedded device. He encouraged University students to get involved in the Freescale Cup, a global competition where student teams build, program, and race a model car around a track for speed.Roberto Franco, SBTVD Forum President, SBTVD, talked about Ginga, a Java-based standard for television in Brazil. He said there are 4 million Ginga TV sets in Brazil, and they expect over 20 million TV sets to be sold by the end of 2014. Ginga is also being adopted in other 11 countries in Latin America. Ginga brings interactive services not only at TV set, but also on other devices such as tablets, PCs or smartphones, as the main or second screen. "Interactive services is already a reality," he said, ' but in a near future, we foresee interactivity enhanced TV content, convergence with OTT services and a big participation from the audience, all integrated on TV, tablets, smartphones and second screen devices."Before he left the stage, Nandini Ramani thanked Judson for being part of the Java community and invited him to the next Geek Bike Ride in Brazil. She presented him an official geek bike ride jersey.For the Technical Keynote, a "blue screen of death" appeared. With mock concern, Stephin Chin asked the rest of the presenters if they could go on without slides. What followed was a interesting collection of demos, including JavaFX on a tablet, a look at Project Easel in NetBeans, and even Simon Ritter controlling legos with his brainwaves! Stay tuned for more dispatches.

Read the article

JavaOne Latin America Opening Keynotes

- by Tori Wieldt

It was a great first day at JavaOne Brazil, which included the Java Strategy and Java Technical keynotes. Henrik Stahl, Senior Director, Product Management for Java opened the keynotes by saying that this is the third year for JavaOne Latin America. He explained, "You know what they say, the first time doesn't count, the second time is a habit and the third time it's a tradition!" He mentioned that he was thrilled that this is largest JavaOne in Brazil to date, and he wants next year to be larger. He said that Oracle knows Latin America is an important hub for development. "We continually come back to Latin America because of the dedication the community has with driving the continued innovation for Java," he said. Stahl explained that Oracle and the Java community must continue to innovate and Make the Future Java together. The success of Java depends on three important factors: technological innovation, Oracle as a strong steward of Java, and community participation. "The Latin American Java Community (especially in Brazil) is a shining example of how to be positive contributor to Java," Stahl said. Next, George Saab, VP software dev, Java Platform Group at Oracle, discussed some of the recent and upcoming changes to Java. "In addition to the incremental improvements to Java 7, we have also increased the set of platforms supported by Oracle from Linux, Windows, and Solaris to now also include Mac OS X and Linux/ARM for ARM-based PCs such as the Raspberry Pi and emerging ARM based microservers." Saab announced that EA builds for Linux ARM Hard Float ABI will be available by the end of the year. Staffan Friberg, Product Manager, Java Platform Group, provided an overview of some of the language coming in Java 8, including Lambda, remove of PermGen, improved data and time APIs and improved security, Java 8 development is moving along. He reminded the audience that they can go to OpenJDK to see this development being done in real-time, and that there are weekly early access builds of OracleJDK 8 that developers can download and try today. Judson Althoff, Senior Vice President, Worldwide Alliances and Channels and Embedded Sales, was invited to the stage, and the audience was told that "even though he is wearing a suit, he is still pretty technical." Althoff started off with a bang: "The Internet of Things is on a collision course with big data and this is a huge opportunity for developers." For example, Althoff said, today cars are more a data device than a mechanical device. A car embedded with sensors for fuel efficiency, temperature, tire pressure, etc. can generate a petabyte of data A DAY. There are similar examples in healthcare (patient monitoring and privacy requirements creates a complex data problem) and transportation management (sending a package around the world with sensors for humidity, temperature and light). Althoff then brought on stage representatives from three companies that are successful with Java today, first Axel Hansmann, VP Strategy & Marketing Communications, Cinterion. Mr. Hansmann explained that Cinterion, a market leader in Latin America, enables M2M services with Java. At JavaOne San Francisco, Cinterion launched the EHS5, the smallest 3g solderable module, with Java installed on it. This provides Original Equipment Manufacturers (OEMs) with a cost effective, flexible platform for bringing advanced M2M technology to market.Next, Steve Nelson, Director of Marketing for the Americas, at Freescale explained that Freescale is #1 in Embedded Processors in Wired and Wireless Communications, and #1 in Automotive Semiconductors in the Americas. He said that Java provides a mature, proven platform that is uniquely suited to meet the requirements of almost any type of embedded device. He encouraged University students to get involved in the Freescale Cup, a global competition where student teams build, program, and race a model car around a track for speed.Roberto Franco, SBTVD Forum President, SBTVD, talked about Ginga, a Java-based standard for television in Brazil. He said there are 4 million Ginga TV sets in Brazil, and they expect over 20 million TV sets to be sold by the end of 2014. Ginga is also being adopted in other 11 countries in Latin America. Ginga brings interactive services not only at TV set, but also on other devices such as tablets, PCs or smartphones, as the main or second screen. "Interactive services is already a reality," he said, ' but in a near future, we foresee interactivity enhanced TV content, convergence with OTT services and a big participation from the audience, all integrated on TV, tablets, smartphones and second screen devices."Before he left the stage, Nandini Ramani thanked Judson for being part of the Java community and invited him to the next Geek Bike Ride in Brazil. She presented him an official geek bike ride jersey.For the Technical Keynote, a "blue screen of death" appeared. With mock concern, Stephin Chin asked the rest of the presenters if they could go on without slides. What followed was a interesting collection of demos, including JavaFX on a tablet, a look at Project Easel in NetBeans, and even Simon Ritter controlling legos with his brainwaves! Stay tuned for more dispatches.

Read the article

Move Data into the grid for scalable, predictable response times

- by JuergenKress

CloudTran is pleased to introduce the availability of the CloudTran Transaction and Persistence Manager for creating scalable, reliable data services on the Oracle Coherence In-Memory Data Grid (IMDG). Use of IMDG architectures has been key to handling today’s web-scale loads because it eliminates database latency by storing important and frequently access data in memory instead of on disk. The CloudTran product lets developers easily use an IMDG for full ACID-compliant transactions without having to be concerned about the location or spread of data. The system has its own implementation of fast, scalable distributed transactions that does NOT depend on XA protocols but still guarantees all ACID properties. Plus, CloudTran asynchronously replicates data going into the IMDG to back-end datastores and back-up data centers, again ensuring ACID properties. CloudTran can be accessed through Java Persistence API (JPA via TopLink Grid) and now, through a new Low-Level API, or LLAPI. This is ideal for use in SOA applications that need data reliability, high availability, performance, and scalability. It is still in its limited beta release, the LLAPI gives developers the ability to use standard put/remove logic available in Coherence and then wrap logic with simple Spring annotations or XML+AspectJ to start transactions. An important feature of LLAPI is the ability to join transactions. This is a common outcome for SOA applications that need to reduce network traffic by aggregating data into single cache entries and then doing SOA service processing in the node holding the data. This results in the need to orchestrate transaction processing across multiple service calls. CloudTran has the capability to handle these “multi-client” transactions at speed with no loss in ACID properties. Developing software around an IMDG like Oracle Coherence is an important choice for today’s web-scale applications and services. But this introduces new architectural considerations to maintain scalability in light of increased network loads and data movement. Without using CloudTran, developers are faced with an incredibly difficult task to ensure data reliability, availability, performance, and scalability when working with an IMDG. Working with highly distributed data that is entirely volatile while stored in memory presents numerous edge cases where failures can result in data loss. The CloudTran product takes care of all of this, leaving developers with the confidence and peace of mind that all data is processed correctly. For those interested in evaluating the CloudTran product and IMDGs, take a look at this link for more information: http://www.CloudTran.com/downloadAPI.ph , or send your questions to [email protected]. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: CloudTran,data grid,M,SOA Community,Oracle SOA,Oracle BPM,BPM,Community,OPN,Jürgen Kress

Read the article

Configure Calendar Server 7 to Use the davUniqueId Attribute

- by dabrain

Starting with Calendar Server 7 Update 3 (Patch 08) we introduce a new attribute davUniqueId in the davEntity objectclass, to use as the unique identifier. The reason behind this is quite simple, the LDAP operational attribute nsUniqueId has been chosen as the default value used for the unique identifier. It was discovered that this choice has a potential serious downside. The problem with using nsUniqueId is that if the LDAP entry for a user, group, or resource is deleted and recreated in LDAP, the new entry would receive a different nsUniqueId value from the Directory Server, causing a disconnect from the existing account in the calendar database. As a result, recreated users cannot access their existing calendars. How To Configure Calendar Server to Use the davUniqueId Attribute? Populate the davUniqueId to the ldap users. You can create a LDIF output file only or (-x option) directly run the ldapmodify from the populate-davuniqueid shell script. # ./populate-davuniqueid -h localhost -p 389 -D "cn=Directory Manager" -w <passwd> -b "o=red" -O -o /tmp/out.ldif The ldapmodify might failed like below, in that case the LDAP entry already have the 'daventity' objectclass, in those cases run populate-davuniqueid script without the -O option. # ldapmodify -x -h localhost -p 389 -D "cn=Directory Manager" -w <passwd> -c -f /tmp/out.ldif modifying entry "uid=mparis,ou=People,o=vmdomain.tld,o=red" ldapmodify: Type or value exists (20) In this case the user 'mparis' already have the objectclass 'daventity', ldapmodify do not take care of this DN and just take the next DN (if you start ldapmodify with -c option otherwise it stop's completely) dn: uid=mparis,ou=People,o=vmdomain.tld,o=red changetype: modify add: objectclass objectclass: daventity - add: davuniqueid davuniqueid: 01a2c501-af0411e1-809de373-18ff5c8d Even run populate-davuniqueid without -O option or changing the outputfile to dn: uid=mparis,ou=People,o=vmdomain.tld,o=red changetype: modify add: davuniqueid davuniqueid: 01a2c501-af0411e1-809de373-18ff5c8d The ldapmodify works fine now. The only issue I see here is you need verify which user might need the 'daventity' objectclass as well. On the other hand start without the objectclass and only add the objectclass for the users where you get 'Objectclass violation' report. That's indicate the objectclass is missing. # ldapmodify -x -h localhost -p 389 -D "cn=Directory Manager" -w <passwd> -c -f /tmp/out.ldif modifying entry "uid=mparis,ou=People,o=vmdomain.tld,o=red" Now it is time to change the configuration to use the davuniquid attribute # ./davadmin config modify -o davcore.uriinfo.permanentuniqueid -v davuniqueid It is also needed to modfiy the search filter to use davuniqueid instead of nsuniqueid # ./davadmin config modify -o davcore.uriinfo.subjectattributes -v "cn davstore icsstatus mail mailalternateaddress davUniqueId owner preferredlanguageuid objectclass ismemberof uniquemember memberurl mgrprfc822mailmember" Afterward IWC Calendar works fine and my test user able to access all his old events.

Read the article

Configuring the iPlanet as web tier for Oracle WebCenter Content (UCM)

- by Adao Junior

If you are looking for configure the iPlanet as Web server/proxy to use with the Oracle WebCenter Content, you probably won’t found an specific documentation for that or will found some old complex notes related to the old 10gR3. This post will help you out with few simple steps. That’s the diagram of the test scenario, considering that you will deploy in production in an cluster environment. First you need the software, for our scenario you will need: - Oracle iPlanet Web Server 7.0.15+ (Installed) - Oracle WebCenter Content 11gR1 PS5 (Installed) - Oracle WebLogic Web Server Plugins 11g (1.1) - Supported JDK (Using Oracle Java JDK 7u4 for the test) - Certified Client OS - Certified Server OS (Using Oracle Solaris 11 for the test) - Certified Database (Using Oracle Database 11.2.0.3 for the test) Then the configuration: - Download the latest plugin: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html - Extract the WLSPlugin11g-iPlanet7.0 in some folder, like <iPlanet_Home>/plugins/wls11 - Include the plugin reference to the magnus.conf: If Unix (Solaris or Linux), include the line: Init fn="load-modules" shlib="/apps/oracle/WebServer7/plugins/wls11/lib/mod_wl.so" If Windows, Include the line: Init fn="load-modules" shlib="D:\\oracle\\WebServer7\\plugins\\wls11\\lib\\mod_wl.dll" - Include the proxy reference to the obj.conf of each instance: <Object name="weblogic" ppath="*/cs/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object> <Object name="weblogic" ppath="*/_dav/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object> <Object name="weblogic" ppath="*/_ocsh/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object> <Object name="weblogic" ppath="*/adfAuthentication/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object> If you are using an single node setup, change the Service fn=…. line to something like: Service fn="wl-proxy" WebLogicHost=<wcc-server> WebLogicPort=16200 With these configurations, your should have the WebCenter Content UI working with the iPlanet, test it. [http://<web-server>/cs/] With the UI working, the last step is to configure the WebDav: - Go to the iPlanet Admin Console (usually https://<web-server>:8989) - Go to Configurations >> [instance] >> Virtual Servers >> [Virtual Server] >> WebDAV: - Click New - Populate the URI with /cs/idcplg/webdav: - Select “Anyone (No Authentication)”, the wc Content will take care of the security: This will allow you to use the WebDav feature and the Desktop Integration Suite, including double-byte characters. Anothers iPlanet tunes could be done, I can cover in the next post related to the iPlanet. Cross-posted on the ContentrA.com Blog Related posts: - Using a Web Proxy Server with WebCenter Family

Read the article

Virtual Lab part 2–Templates, Patterns, Baselines

- by Geoff N. Hiten

Once you have a good virtualization platform chosen, whether it is a desktop, server or laptop environment, the temptation is to build “X”. “X” may be a SharePoint lab, a Virtual Cluster, an AD test environment or some other cool project that you really need RIGHT NOW. That would be doing it wrong. My grandfather taught woodworking and cabinetmaking for twenty-seven years at a trade school in Alabama. He was the first instructor hired at that school and the only teacher for the first two years. His students built tables, chairs, and workbenches so the school could start its HVAC courses. Visiting as a child, I also noticed many extra “helper” stands, benches, holders, and gadgets all built from wood. What does that have to do with a virtual lab, you ask? Well, that is the same approach you should take. Build stuff that you will use. Not for solving a particular problem, but to let the Virtual Lab be part of your normal troubleshooting toolkit. Start with basic copies of various Operating Systems. Load and patch server and desktop OS environments. This also helps build your collection of ISO files, another essential element of a virtual Lab. Once you have these “baseline” images, you can use your Virtualization software’s snapshot capability to freeze the image. Clone the snapshot and you have a brand new fully patched machine in mere moments. You may have to sysprep some of the Microsoft OS environments if you are going to create a domain environment or experiment with clustering. That is still much faster than loading and patching from scratch. So once you have a stock of raw materials (baseline images in this case) where should you start. Again, my grandfather’s workshop gives us the answer. In the shop it was workbenches and tables to hold large workpieces that made the equipment more useful. In a Windows environment the same role falls to the fundamental network services: DHCP, DNS, Active Directory, Routing, File Services, and Storage services. Plan your internal network setup. Build out an AD controller with all the features listed. Make the actual domain an isolated domain so it will not care about where you take it. Add the Microsoft iSCSI target. Once you have this single system, you can leverage it for almost any network environment beyond a simple stand-alone system. Having these templates and fundamental infrastructure elements ready to run means I can build a quick lab in minutes instead of hours. My solutions are well-tested, my processes fully documented with screenshots, and my plans validated well before I have to make any changes to client systems. the work I put in is easily returned in increased value and client satisfaction.

Read the article

Mock RequireJS define dependencies with config.map

- by Aligned

Originally posted on: http://geekswithblogs.net/Aligned/archive/2014/08/18/mock-requirejs-define-dependencies-with-config.map.aspxI had a module dependency, that I’m pulling down with RequireJS that I needed to use and write tests against. In this case, I don’t care about the actual implementation of the module (it’s simple enough that I’m just avoiding some AJAX calls). EDIT: make sure you look at the bottom example after the edit before using the config.map approach. I found that there is an easier way. I did not want to change the constructor of the consumer as I had a chain of changes that would have to be made and that would have been to invasive for this task. I found a question on StackOverflow with a short, but helpful answer from “Artem Oboturov”. We can use the config.map from RequireJs to achieve this. Here is some code: A module example (“usefulModule” in Common/Modules/usefulModule.js): define([], function() { "use strict"; var testMethod = function() { ... }; // add more functionality of the module return { testMethod; } }); A consumer of usefulModule example: define([ "Commmon/Modules/usefulModule" ], function(usefulModule) { "use strict"; var consumerModule = function(){ var self = this; // add functionality of the module } }); Using config.map in the html of the test runner page (and in your Karma config –> I’m still trying to figure this out): map: {'*': { // replace usefulModule with a mock 'Common/Modules/usefulModule': '/Tests/Specs/Common/usefulModuleMock.js' } } With the new mapping, Require will load usefulModuleMock.js from Tests/Specs/Common instead of the real implementation. Some of the answers on StackOverflow mentioned Squire.js, which looked interesting, but I wasn’t ready to introduce a new library at this time. That’s all you need to be able to mock a depency in RequireJS. However, there are many good cases when you should pass it in through the constructor instead of this approach. EDIT: After all that, here’s another, probably better way: The consumer class, updated: define([ "Commmon/Modules/usefulModule" ], function(UsefulModule) { "use strict"; var consumerModule = function(){ var self = this; self.usefulModule = new UsefulModule(); // add functionality of the module } }); Jasmine test: define([ "consumerModule", "/UnitTests/Specs/Common/Mocks/usefulModuleMock.js" ], function(consumerModule, UsefulModuleMock){ describe("when mocking out the module", function(){ it("should probably just override the property", function(){ var consumer = new consumerModule(); consumer.usefulModule = new UsefulModuleMock(); }); }); }); Thanks for letting me think out loud :-).

Search Results

Search found 5313 results on 213 pages for 'steve care'.

Page 154/213 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161 | Next Page >

- by AjarnMark

- by Izzy

- by Pinal Dave

- by Tony Davis

- by anca.rosu

- by saifkhan

- by dianovich

- by zaphod

- by Stefano Borini

- by haylem

- by JuergenKress

- by henry

- by Kristof Claes

- by shawn

- by BuckWoody

- by Tanu Sood

- by Korey Hinton

- by Wayne M

- by Tori Wieldt

- by Tori Wieldt

- by JuergenKress

- by dabrain

- by Adao Junior

- by Geoff N. Hiten

- by Aligned

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161 | Next Page >