Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 155/613 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

  • Fixing IP Renewal After Laptop Suspend

    - by Cerin
    I have a laptop running Ubuntu 10.04, and I've noticed that with some wifi networks, but not all, I'm unable to reconnect after coming out of suspension. I've tried both Network Manager and Wicd management daemons, and both get through validation, but get hung up on "Acquiring IP address...". The only solution I've found is to reboot the machine, after which it acquires an IP address very quickly. What's the underlying issue here? What would be a more efficient way to resolve the problem? EDIT: I've noticed that if I open Wicd and manually press "Connect", it fails to acquire an IP. However, if I do nothing and let it automatically try and connect, it acquires an IP and connects just fine...

    Read the article

  • You couldn't write it - Expired SA account

    - by GrumpyOldDBA
    This is the stuff of DBA nightmares ! email trail: Q. Can you reset the SA account on server XXXXX, we think it has expired and now no-one can work. Connect to Server: Surely no-one would set up a Server with an sa account which expires? Thankfully not. Find sa password and change connection to use SA account. Connect without issue. Me. Have checked Server and account is fine. A. Thanks that's great, you've fixed it we can all work now....(read more)

    Read the article

  • BCM4313 wireless not working on Dell Inspiron 4010

    - by Mandar
    I have Ubuntu 11.10 installed today and trying to connect to wireless but its not working. It has been working correctly on my Windows 7. i am pretty new to Ubuntu. I tried suggestions listed in this forum but nothing seems to be working for wireless. It shows wireless card listed when I do- sudo lshw -C network: It displays wireless interface as BCM4313. my laptop- Dell Inspiron 4010 Ubuntu- 11.10 Any suggestions? It works when I connect LAN cable to same modem.

    Read the article

  • Empathy authentication error to XMPP server

    - by Shauna
    I recently installed Ubuntu 12.04 on a new machine and have been working on setting it up, but I've run into an interesting problem. I have a custom XMPP server for work (I don't control it, but we're using an in-house install). I can connect to it just fine via Pidgin, but due to some UI issues I'm having with Pidgin (and what appears to be better overall integration between Empathy and Ubuntu/Unity), I'd like to use Empathy instead. However, Empathy won't connect to my XMPP server, and I keep getting an authentication error and repeatedly prompted for my password. This happens even when importing the working account information from Pidgin (so I know things like the password are correct). Is there a way I can get Empathy working with my XMPP server?

    Read the article

  • How to route my internet from mobile broadband from a third party software to network manager

    - by user86865
    I use mobile broadband connection (Reliance Netconnect+ USB) for internet. I can connect to this network from Network Manager easily. There is a 3rd party software which is given by the service provider. I can also connect to the internet by using this software (Software from ZTE). But when i am using this software, i cannot upload files to Ubuntu One, Cannot install packages from Software Center, etc except i can load web pages from FireFox. But when using the connection from NM, i can do all the stuffs. But, there are so many options available in this 3rd party software. So, can i route my internet connection from this software to my Network Manager? There are some options available in the settings as;- Dns, alternate dns, static IP, CHAP, PAP. Can anyone help me?? I use 12.04.

    Read the article

  • File manager (Nautilus) hangs or is ultra slow when listing contents of ssh/sftp server

    - by NahsiN
    I used to use File -- Connect to server to connect to my remote ssh a lot before 12.04/11.10. But now in a fresh install of 12.04, whenever I try to access the remote files, nautilus either always hangs or is ultra slow (5 mins) in listing the directory contents. Most of the time I have to force quit or xkill. Mounting using SSHFS works fine. The ssh server is fast and it works fine via putty, mc (using fish) and normal terminal. I also installed nautilus in Lubuntu 12.04 (virtualbox) and to my surprise, browsing is fast and smooth. Both versions of nautilus are at 3.4.2 thus I am led to believe the problem might be lying somewhere in Ubuntu 12.04. But I am clueless. All suggestions welcome. I really need to solve this problem.

    Read the article

  • Issues running alongside windows and connecting to wireless network

    - by user292247
    Okay so I'm trying to get started with ubuntu but I'm encountering a couple problems: When I boot up the CD and try to install, it does not recognize that I have windows 7 installed and just sees it as unallocated space so the only way I've been able to install it is by wiping the drive which was fine, but it'd be nice to be able to boot either. And secondly, I cannot figure out how to get wireless working. When I try to connect on the initial installation process it tells me to connect to my adapter and just asks for a password. I suspect it could be a driver issue but I wouldn't know where to find it. I have an AR9485 atheros adapter and am attempting to run ubuntu 14.04. Thanks

    Read the article

  • Why doesn't my graphic card support 1280*1024?

    - by Allwar
    Hi, I have an external monitor which is an 20" 1280*1024. In windows 7 it works fine with that resolution but in ubuntu it can't. Example: In windows I connect it and activates it, done. In ubuntu I connect and the only resolution that is available is the ones my laptop screen support, 12" 1366*768. My laptop is an asus 1201n. If I force it to use 1280*1024 both screen crashes and i have to force a reboot. what should I do? alvar@alvars-laptop:~$ disper -l display DFP-0: HSD121PHW1 resolutions: 320x175, 320x200, 360x200, 320x240, 400x300, 416x312, 512x384, 640x350, 576x432, 640x400, 680x384, 720x400, 640x480, 720x450, 640x512, 700x525, 800x512, 840x525, 800x600, 960x540, 832x624, 1024x768, 1366x768 display CRT-0: CRT-0 resolutions: 320x240, 400x300, 512x384, 680x384, 640x480, 800x600, 1024x768, 1152x864, 1360x768

    Read the article

  • How to create browser based software?

    - by erkant
    I have recently used some software, which come as a regular setup file, where you install your software, and then when you run it, opens the browser, uses the localhost with some specific port number to connect to the software, and runs it from there. I find it quite useful and interesting. But I even don't know whether this kind of software and programming methodology have a name or not. Therefore, I would like to learn which programming languages, APIs, and frameworks are specifically designed for this purpose? One example to this is Metasploit. You can download its setup file, and install it casually like any other software, then when everything finishes, and you want to use the software. It will open the browser and connect to, http://localhost:3790/ where Metasploit will load and start.

    Read the article

  • SQL Server 2008 R2: StreamInsight changes at RTM: Event Flow Debugger and Management Interface Secur

    - by Greg Low
    In CTP3, I found setting up the StreamInsight Event Flow Debugger fairly easy. For RTM, a number of security changes were made. First config: To be able to connect to the management interface, your user must be added to the Performance Log Users group. After you make this change, you must log off and log back on as the token is only added to your login token when you log on. I forgot this and spent ages trying to work out why I couldn't connect. Second config: You need to reserve the URL that the...(read more)

    Read the article

  • Bumblebee stopped working after the today's update

    - by renatov
    I've followed this guide to put Bumblebee to work. Everything was working perfect and I was happy playing my Steam games using primusrun to run them. But after today's update, which updated something related to NVIDIA, Bumblebee is not working anymore: $ primusrun glxgears 2014/06/01 02:36:36 socat[4154] E connect(3, AF=1 "/var/run/bumblebee.socket", 27): No such file or directory primus: fatal: failed to connect to Bumblebee daemon: No such file or directory I'm using Ubuntu 14.04, I have an optimus notebook with a dedicated Nvidia GeForce 730M and an integrated Intel card. Could someone help me, please?

    Read the article

  • How to get espeak working?

    - by wisemonkey
    I'm trying read it loud feature of acrobat, so need a text synthesizer, I've installed espeak and libgnome-speech libraries (it didn't work for acrobat right out of the box) so when I started espeak-gui through command line it gave me segmentation fault next I tried only espeak and here is output: ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started Any ideas? or any alternative solutions for read it loud? Thanks

    Read the article

  • No Internet Connection - ubuntu 11.10

    - by emersonhsieh
    I installed Ubuntu 11.10 recently. After the first bootup the computer freezes so I have to force-quit my computer. Then I turned on my computer after that. I tried connecting to the internet. My (and my neighbor's) wireless networks shown up, but no matter how many times I tried, I can't connect to my home network. I checked the password and the other laptop's internet works (a MacBookPro). It was a wireless network. What's weird is that the Wireless network worked when I was installing ubuntu How can I connect to the internet now? I don't have a wired network. Please Help! Any help will be appreciated Specs: ASUS F81Se, Windows 7 Dual-boot, I remember the wireless card was made by Atheros, 4GB RAM

    Read the article

  • How to lower wait time for repository updates

    - by Luis
    When doing a aptitude update / apt-get update or using the Update Manager to update sometimes I get to a repository link that takes too long. The percent does not end and it takes quite a while before it ignores it. How can I lower the time so that if a particular repository takes more than 10 seconds to connect or finish it should ignore it and move the following ones. Here is an image explaining the problem: It is trying to connect to archive.ubuntu.com but since it is taking too long it just sits there for at least 3 to 5 minutes (Haven't measured the time) and then it shows as ignored and moves to the following. I wish to change that to seconds instead of minutes.

    Read the article

  • Ubuntu 12.10 WiFi Problems

    - by Sean Webber
    I have a 32 bit machine running Ubuntu 12.10 with WiFi on it. I have a WPA2 network at home, but if I leave the USB Adapter plugged in while it boots, it infinitely keeps asking for the network password but never connects. If I plug it in after boot, it will connect but then I can't access ANYTHING on the LAN or Internet because "the DNS servers are unreachable". Now, if I leave the computer on a while, I get lucky sometimes and it MAGICALLY decides to connect for a little bit, lock the machine though and the Internet's gone again. The weirdest thing, is when I am connected but can't get to the internet, I do a netstat or ifconfig wlan0, I do have an IP address and everything. It says I'm connected but its not. I have a Realtek RTL8188CU USB adapter.

    Read the article

  • Unstable wireless connection on Ubuntu only (router config problem?)

    - by crunch
    so I'm using Ubuntu 14.04 and I could connect to all Wi-Fi's that I've tried and it worked fine... Except for this router that I have at home. This connection seems to be unstable, it just randomly disconnects and reconnects. On the same machine I have Ubuntu 13.10 (same problem) and Windows 8 (no problem). Also there are no Wi-Fi problems when I connect with my Android phone. So I figured it must be some config issue. I tried tweaking some settings/restoring default on the router but I don't really know what I'm doing so, unsurprisingly, it didn't fix the problem.

    Read the article

  • Redirect packages directed to port 5000 to another port

    - by tdc
    I'm trying to use eboard to connect to the FICS servers (http://www.freechess.org), but it fails because port 5000 is blocked (company firewall). However, I can connect to the server through the telnet port (23): telnet freechess.org 23 (succeeds) telnet freechess.org 5000 (fails) Unfortunately the port number is hardcoded (see here: http://ubuntuforums.org/archive/index.php/t-1613075.html). I'd rather not have to hack the source code as the author of that thread ended up doing. Can I just forward the port on my local machine using iptables? I tried: sudo iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 5000 -j REDIRECT --to-port 23 and sudo iptables -t nat -I OUTPUT --src 0/0 -p tcp --dport 5000 -j REDIRECT --to-ports 23 but these didn't work... Note that: $ sudo iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:5000 redir ports 23 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:5000 redir ports 23 Chain POSTROUTING (policy ACCEPT) target prot opt source destination

    Read the article

  • Apple pushnotification [closed]

    - by VIVEK
    I have a PHP script located in path like /var/www/vhosts/hostname/httpdocs/webservices, I have both PHP script and .pem files there, and I have called the .pem file in the script properly, but still when I run the script , I don't get push notification , instead i get warnings such as: Warning: stream_socket_client() [function.stream-socket-client]: Unable to set local cert chain file `ck_push_test.pem'; Check that your cafile/capath settings include details of your certificate and its issuer in /var/www/vhosts/ipartyapps.com/httpdocs/webservices/testPush.php on line 12 Warning: stream_socket_client() [function.stream-socket-client]: failed to create an SSL handle in /var/www/vhosts/ipartyapps.com/httpdocs/webservices/testPush.php on line 12 Warning: stream_socket_client() [function.stream-socket-client]: Failed to enable crypto in /var/www/vhosts/ipartyapps.com/httpdocs/webservices/testPush.php on line 12 Warning: stream_socket_client() [function.stream-socket-client]: unable to connect to ssl://gateway.push.apple.com:2195 (Unknown error) in /var/www/vhosts/ipartyapps.com/httpdocs/webservices/testPush.php on line 12 Failed to connect 0 I double checked everything path, permissions and owner/group of both script and .pem files, still not getting push notification. Any suggestions please, as it's urgent.

    Read the article

  • Cant find one particular wireless network. Worked before, but sudenly stopt working.

    - by Haakon
    My first question here. My problem is: I cant find my wireless network at home. Situation: It worked fine 7 days ago. It works with a cable(wierd). I find the network on my ipad/phone. I can connect to wireless hotspot network form my phone and wireless at my university, and it works fine. I can connect to the network in windows What I have tried: Tried this Strange network issue; works on windows, but not on ubuntu, works on campus wireless, but not at home (removing resolve.conf). Hardware and software: I have a Broadcom card Use dual boot ubuntu 12.04 - windows 7 Things I did to make wireless work: blacklist brcmsmac blacklist bcma blacklist b43 blacklist ssb Can anyone help me? I'm about to kill myself(not literary)!! I'm not that good in linux so go gentle on me:)

    Read the article

  • Why is using an external USB drive or USB printer causing my system to hang?

    - by thepd
    I am having some troubles using various external hard drives and my printer, all of which I connect using USB. The majority of the time, when I connect either of these devices, my system freezes up completely after about 10 minutes. They work just fine prior to that moment. I've also not noticed any problems using a USB mouse. I'm running Ubuntu 10.10 and have tried using a newer kernel (a 2.6.36 Maverick kernel from the kernel ppa, as opposed to the default 2.6.35 one) to no avail. I'm using a Dell Studio XPS 16 (M1647) which is a sort of newish laptop and so my guess is this is probably some kind of driver bug. Is there anyway to debug these sorts of issues? I've looked through some of my logs (/var/log/messages seemed the most useful) but haven't been able to find any kind of USB related logging nor anything interesting happening prior to the hang.

    Read the article

  • Wifi works perfectly on Windows, but drops on Ubuntu

    - by alecRN
    I have a dual-boot computer with Windows XP on one partition and Ubuntu 10.10 on the other. In Windows XP I can connect to a hidden wireless network (WPA-PSK AES) perfectly, and I was finally able to install the driver for the adapter on Ubuntu (RNX-N180UBE, hardware id RTL8191SU). It works fine when I first boot the computer and log in, but then after a few minutes the network suddenly stops working completely. If I try to reconnect it, the network manager claims to have connected, but in actuality it's still down. At some points, I have been able to connect to a public network even while the private network didn't work, but that eventually wouldn't work at all either.

    Read the article

  • Mysql query does not update row [closed]

    - by Gerculy Robert
    // Connect to server and select database. mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); // get value of id that sent from address bar /*$id=$_GET['$usrid'];*/ // Retrieve data from database $sql="SELECT * FROM user WHERE id='$usrid'"; $result=mysql_query($sql); $rows=mysql_fetch_array($result); ?> <table width="400" border="0" cellspacing="1" cellpadding="0"> <tr> <form name="form1" method="post" action="update.php"> <td> <table width="100%" border="0" cellspacing="1" cellpadding="0"> <tr> <td>&nbsp;</td> <td colspan="3"><strong>Update site info</strong> </td> </tr> <tr> <td align="center">&nbsp;</td> <td align="center">&nbsp;</td> <td align="center">&nbsp;</td> <td align="center">&nbsp;</td> </tr> <tr> <td align="center">&nbsp;</td> <td align="center"><strong>User Name</strong></td> <td align="center"><strong>Site url</strong></td> <td align="center"><strong>Url banner</strong></td> </tr> <tr> <td>&nbsp;</td> <td align="center"> <input name="username" type="text" id="username" value="<? echo $rows['username']; ?>"> </td> <td align="center"> <input name="siteurl" type="text" id="siteurl" value="<? echo $rows['siteurl']; ?>" size="40"> </td> <td> <input name="urlbanner" type="text" id="urlbanner" value="<? echo $rows['urlbanner']; ?>" size="40"> </td> </tr> <tr> <td>&nbsp;</td> <td> <input name="id" type="hidden" id="id" value="<? echo $rows['id']; ?>"> </td> <td align="center"> <input type="submit" name="Submit" value="Submit"> </td> <td>&nbsp;</td> </tr> </table> </td> </form> </tr> </table> <?php // close connection mysql_close(); ?> // Connect to server and select database. mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); // update data in mysql database $sql="update user SET siteurl='$siteurl', username='$username', urlbanner='$urlbanner' WHERE id=$usrid"; $result=mysql_query($sql); // if successfully updated. if($result){ echo "Successful"; echo "<BR>"; echo "<a href='edit.php'>View result</a>"; } else { echo "ERROR"; } Hello, I have this two pages wich should update 3 rows. The problem is it does not update all , only 2 . I tried over 1 hour to find the problem but nothing. The row , siteurl, is not being updated at all . The table is : varchar(255) Database and session is ok. Any idea ? It's just a simple update code , should work fine :(

    Read the article

  • How to recover Wordpress on GoDaddy hosting after reseting database password? [migrated]

    - by Tom Brito
    I did reset my database password, so I could enter the phpMyAdmin, but now my Wordpress installation can't connect to the database. I tried to access the "wp-config.php" (should be at http://mysite.com/wp-config.php right?) but, again, I get the "can't connect to database" message. Also, now when I try to access the file manager on the GoDaddy hosting, I get "The page isn't redirecting properly". I did e-mail the GoDaddy support, and I'm researching while they do not answer. Not sure if it's a GoDaddy or Wordpress issue. Is there any way to fix Wordpress, or I'll need to re-install it?

    Read the article

  • Installed Ubuntu on a macbook pro and am running into errors with internet

    - by user209270
    I recently installed Ubuntu (64 bit, 12.04) on a mid-2012 Macbook Pro, and I've been having some really annoying issues. Chief among them is that my wireless doesnt seem to function properly. I've installed Ubuntu on this mac before, and again this time the drivers for the wireless card were missing. I, using something along the lines of sudo su apt-get update apt-get upgrade apt-get b43-fwcutter firmware-b43-installer A new problem I've been experiencing however is that none of the networks available in my home show up. I've been able to connect theto themm by going into "Connect to hidden networks" and typing in the network name and password, but when I restart the computer my network (let's just name it "Network1"), doesnt show up. I tried going into "Edit Connections" and it shows up in the wireless tab, but it is never connected to automatically or shows up in the drop-down menu. Any help?

    Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >