Search Results

Search found 22968 results on 919 pages for 'stuck again'.

Page 156/919 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Boinc permissions problem on OS X

  - by Erik Vold

  I installed boinc 6.10.21 on my OS X 10.5 in order to upgrade from a 6.6 version that I was running today, and I am the admin user, and I was logged in as the admin user. As I was installing 6.10.21 I was asked if non admin users should be allowed to use Boinc, and I said 'yes' to this. Then when I tried to open Boinc I got a message like the following: "You currently are not authorized to manage the client. Either re-install and allow non-admin users or contact your administrator to add you to the 'boinc_master' user group." So I tried to reinstall first, and I was not asked if non admin users should be allowed to use Boinc.. so I retried a few times and got no different result.. So I downloaded 6.10.43 and installed that, and again I was not asked if non admin users should be allowed to use boinc.. and when I tried to run Boinc I got the same message like: "You currently are not authorized to manage the client. Either re-install and allow non-admin users or contact your administrator to add you to the 'boinc_master' user group." So I did a Google search trying to figure out how to add my admin user to the bonic_master user group and found this which suggested I run the following in terminal: "sudo dscl . -append /Groups/boinc_master GroupMembership <your user's short name> CR" So I did this and now I get the following error: BOINC ownership or permissions are not set properly; please reinstall BOINC (Error code -1200) So I reinstall and I am ever asked the question about allowing non admin users again, and I still get this error message every after every reinstall attempt.. What should I do?..

  Read the article

• Windows 7 UAC (user access control) is being disabled on every reboot

  - by Christian Thamer

  To put it simply, I noticed UAC was disabled so I enabled it. I was prompted to reboot the computer for the changes to take effect. Upon my reboot I checked the settings again as I hadn't disabled UAC in the first place. It was again set to off (never notify). For the heck of it I repeated the process a couple of more times. Same result each time. I have Microsoft Security Essentials running a full scan nightly so I should be protected from viruses. I also did an on demand scan with the online tool at www.antivirus.com. Nothing was found. Other than the fact that UAC is being disabled on each reboot I have no other reason to suspect a virus. So my question is does anyone have insight into if this is a possible problem with a virus or other malware changing my UAC settings on each boot or is it possibly a problem with Windows and UAC itself? If it is malware are there suggestions for other products outside of the ones I have used to detect and remove it.

  Read the article

• Firefox does not upgrade properly (infinite installation loop without success)

  - by Mehper C. Palavuzlar

  I've been using Firefox for a long time but I have a problem with upgrading process now. As you know, Firefox automatically checks for the latest version and downloads it, and when it is ready to be installed it starts the installation process as usual. Last month, when I clicked on "OK, install v3.6.2", the process started but couldn't be finished properly. FF gave a message like that: "Installation cannot be completed, please restart Firefox to retry". When I restarted FF, the same thing happened, and the process entered in an infinite loop. I restarted my PC and clicked on FF icon, and again the installation process began and went into the infinite loop. My solution to this problem was to download FF 3.6.2 and manually install it after killing firefox.exe. Today, FF proposed me to install v3.6.3 and again the same problem occured. I manually downloaded FF 3.6.3 and installed it successfully. Anyone experiencing this problem? In case you want to know, I did not install any new addons in the last few months, and my FF operates without problems. I'm using Windows 7 Home Pro x64.

  Read the article

• None of usb-controllers are working after a crash

  - by Cray

  So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

  Read the article

• SCCM 2012 Clients no longer detecting

  - by user3685428

  Here is the scenario I had a fully functioning SCCM 2012 site server with the DP, MP, SUP, Application catalog, etc. roles configured and working. There is only one server on this site. Everything was great but i was not happy with SUP, so i decided to create a separate WSUS server and configure Windows Updates through GPOs. That setup worked great as well so i went ahead and removed the SUP role from SCCM and removed the WSUS feature from my SCCM server (they were configured on the same SCCM Server). I did not notice any problems right away. A couple days later i noticed that the OSD deployments were giving errors, and after a couple hours of trying suggestions from Google, i was able to uninstall PXE and make a few changes and reinstall with WDS to get it working again. Again, thought everything was fine and continued on. The last couple days i have noticed that any new machine deployed or installing the Client will show in the SCCM console as "No" Client. The client machines will show connected to a site but the software center shows "IT Organization" instead of our site like the previous clients. The existing clients all seem to be functioning normally. they still receive application distributions and configuration baselines, etc. Reinstalling, uninstalling and reinstalling, repairing does not fix the problems and this happens on all new clients. ClientLocation.log shows it connecting to the correct MP. Nothing odd in any of the logs except for the ClientMessaging.log which repeats continuously this line: <![LOG[Raising event: instance of CCM_CcmHttp_Status { ClientID = "GUID:0450fde3-ab82-41bf-9c33-87a18113744b"; DateTime = "20140528214824.993000+000"; HostName = "SOUNDWAVE.domain.org"; HRESULT = "0x00000000"; ProcessID = 4092; StatusCode = 0; ThreadID = 3720; }; ]LOG]!><time="16:48:24.994+300" date="05-28-2014" component="CcmMessaging" context="" type="1" thread="3720" file="event.cpp:706"> thanks

  Read the article

• Photoshop CS6 Corrupted File recovery

  - by Ben Franchuk

  Last night I was working on a client application mock-up in photoshop, but was goin to take a break from my work so I saved the .PSD file on my internal HDD and put my computer into stand-by mode once the file had finished saving. Unfortunately my computer crashed while it was entering stand-by and shut itself down (photoshop was still open). I did not boot it again to make sure all my files were ok because they had already been saved, but today once I opened up the file again it was extremely corrupted and also completely un-editable (screenshot bellow). so what im asking is there any way to recover my work, or at least some of it? i have put in a good few days work on this project and would hate to have to restart it. the size of the file is 3070 KB, even though it reads as 712 KB in photoshop. i dont know if these file sizes are larger or either smaller than the original non-corrupted file's size, but considering all the layers in the file i suspect it was larger before it corrupted. im using windows XP professional 32bit SP3. both my OS and said .PSD file are located on the same internal HDD (74.4 GB). i do have an external HDD (1.5 TB) but i primarily only use it for movies music and tv shows. i dont know if it was plugged in t the time of me editing the document last, though, if it means anything. i have tried many image and PSd recovery softwares but none have returned any results that may help recover my work. edit: i tried using a photo reccovery software (odboso Photorecovery) that actually seems to recover the corrupted file in question judging by the size of the file, but i cannot recover it because of the licence fee. knowing that the file is still likely on my HDD, what location might it be located?

  Read the article

• Can't set screen brightness in Gentoo system

  - by Real Yang

  My system: Linux gentoo 3.10.7-gentoo-r1 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 240M] (rev a2) output of xbacklight: No outputs have backlight property output of xrandr: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1280 x 720, maximum 1280 x 768 default connected 1280x720+0+0 0mm x 0mm 1280x720 0.0* 1024x768 61.0 800x600 61.0 640x480 60.0 1280x768 0.0 output of ls /proc/acpi: button/ event When I'm in kernel 3.8.13, I can change my brightness using xbacklight. I compiled 3.10.7-r1 using genkernel all. Before the upgrade I did get a notice of "compatible issues for Nvdia users" from emerge but I still don't know the details. It there anyway to let me set the brightness? Then i found a ebuild app-laptop/nvdiabl-0.81 and tried to emerege nvidabl, I got this message: Your kernel does not support FB_BACKLIGHT. To enable you it you can enable any frame buffer with backlight control or nouveau. Note that you cannot use FB_NVIDIA with nvidia's proprietary driver Please check to make sure these options are set correctly. Failure to do so may cause unexpected problems. Once you have satisfied these options, please try merging this package again. ERROR: app-laptop/nvidiabl-0.81::gentoo failed (pretend phase): Incorrect kernel configuration options Call stack: ebuild.sh, line 93: Called pkg_pretend nvidiabl-0.81.ebuild, line 31: Called linux-mod_pkg_setup linux-mod.eclass, line 559: Called linux-info_pkg_setup linux-info.eclass, line 911: Called check_extra_config linux-info.eclass, line 805: Called die The specific snippet of code: die "Incorrect kernel configuration options" [SOLVED] I enter the menuconfig again and check the Device Drivers -> Graphics support -> Support for frame buffer devices, then i found this: <*> nVidia Framebuffer Support [*] Support for backlight control (NEW) What can i say. Recompiling...

  Read the article

• How Do I Install Latest Java Plugin on Ubuntu 8.04 LTS with Custom Firefox 3.6.3?

  - by Volomike

  I have Ubuntu 8.04 LTS and will need to remain on that for awhile as I am a programmer and cannot disturb what I'm doing in the middle of a project. As you know, it doesn't want to install the latest Firefox by default and keeps me in the stone age. So, I had to install my own Firefox. I did so and with relative ease I was able to install the Flash plugin using the normal 'ln -s' technique one usually does with /usr/lib/firefox/plugins. Now I need to do a Gotomypc.com task and it requires Java -- moan -- so I need to figure out how to install Java. I downloaded and installed the latest Java plugin in /usr/java, and I do see underneath that layer of folders a plugins folder with a .so file. So, I went to /usr/lib/firefox/plugins and did this: ln -s /usr/java/jre1.6.0_20/plugin/i386/ns7/libjavaplugin_oji.so Then, I also read on the web that one has to create a ~/.mozilla/plugins folder, cd into it, and then run the same ln -s command again. Another site recommended finding one's ~/.mozilla/firefox and renaming it to ~/.mozilla/firefox.old (after you backed up your bookmarks) and then launching firefox again so that it creates ~/.mozilla/firefox and uses the new Java plugin. Well, all these attempts have completely failed and it is incredibly frustrating. I do about:plugins to see my plugins and all I get are the Flash and the default null plugin. I do not see the Java one. Also, they said on my tools menu with Firefox 3.6.3 I would see a Java Console menu and I don't see that either. I found a pluginreg.dat somewhere deep under ~/.mozilla/firefox, but it does not list the Java plugin inside -- only Flash and the null plugin. Please help me install Java. I need to help a client out and need to connect to his PC remotely with gotomypc, which requires Java inside firefox.

  Read the article

• Opening an existing process

  - by Grasper

  I am using Eclipse in Linux through a remote connection (xrdp). My internet got disconnected, so I got disconnected from the server while eclipse was running. Now I logged in again, and I do the "top" command I can see that eclipse is running and still under my user name. Is there some way I can bring that process back into my view (I do not want to kill it because I am in the middle of checking in a large swath of code)? It doesnt show up on the bottom panel after I logged in again. Here is the "top" output: /home/mclouti% top top - 08:32:31 up 43 days, 13:06, 29 users, load average: 0.56, 0.79, 0.82 Tasks: 447 total, 1 running, 446 sleeping, 0 stopped, 0 zombie Cpu(s): 6.0%us, 0.7%sy, 0.0%ni, 92.1%id, 1.1%wa, 0.1%hi, 0.1%si, 0.0%st Mem: 3107364k total, 2975852k used, 131512k free, 35756k buffers Swap: 2031608k total, 59860k used, 1971748k free, 817816k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13415 mclouti 15 0 964m 333m 31m S 21.2 11.0 83:12.96 eclipse 16040 mclouti 15 0 2608 1348 888 R 0.7 0.0 0:00.12 top 31395 mclouti 15 0 29072 20m 8524 S 0.7 0.7 611:08.08 Xvnc 2583 root 20 0 898m 2652 1056 S 0.3 0.1 139:26.82 automount 28990 postgres 15 0 13564 868 304 S 0.3 0.0 26:33.36 postgres 28995 postgres 16 0 13808 1248 300 S 0.3 0.0 6:54.95 postgres 31440 mclouti 15 0 3072 1592 1036 S 0.3 0.1 6:01.54 gam_server 1 root 15 0 2072 524 496 S 0.0 0.0 0:03.00 init 2 root RT -5 0 0 0 S 0.0 0.0 0:04.53 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:01.72 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:04.33 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.05 ksoftirqd/2

  Read the article

• Installing Ruby 1.9.3 OSX 10.7.4 breaks after altering PATH

  - by R V

  I was having trouble installing ruby 1.9.3-p194 from ruby 1.8.7 on my mac osx 10.7.4. I have was trying to fix my homebrew after running "brew doctor" and got the message of "/usr/bin occurs before /usr/local/bin This means that system-provided programs will be used instead of those provided by Homebrew. The following tools exist at both paths: c++-4.2 cpp-4.2 erb g++-4.2 gcc-4.2 gcov-4.2 gem i686-apple-darwin11-cpp-4.2.1 i686-apple-darwin11-g++-4.2.1 i686-apple-darwin11-gcc-4.2.1 irb rake rdoc ri ruby testrb" I fixed it by entering the following, which I found on another stackoverflow answer: export PATH="/usr/local/bin:/usr/local/sbin:~/bin$PATH" Lo and behold! when I typed that ruby updates to 1.9.3-p194. Ruby files seem to compile and run just fine. However, afterward, my navigation around terminal is messed up severely. For instance I can't do the command "open example_file.html" and have the file pop up in Chrome, instead I get the error: "-bash: open: command not found" Also, when I change directory, I get an error, inputting "$ cd desktop" yields the output, "-bash: dirname: command not found" but the directory does then changes... strange. When I exit out of a terminal window all this resets. I'm back to Ruby 1.8.7, have to use the PATH command again to update to 1.9.3, command line navigation gets broken again. Any guidance on how to remedy so I can use 1.9.3-p194 and also have normal terminal navigation would be greatly appreciated.

  Read the article

• Karmic iptables missing kernel moduyles on OpenVZ container

  - by luison

  After an unsuccessful p2v migration of my Ubuntu server to an OpenVZ container which I am stack with I thought I would give a try to a reinstall based on a clean OpenVZ template for Ubuntu 9.10 (from the OpenVZ wiki) When I try to load my iptables rules on the VM machine I've been getting errors which I believe are related to kernel modules not being loaded on the VM from the /vz/XXX.conf template model. I've been testing with a few post I've found but I was stack with the error: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Could not load /lib/modules/2.6.24-10-pve/modules.dep: No such file or directory iptables-restore v1.4.4: iptables-restore: unable to initialize table 'raw' Error occurred at line: 2 Try `iptables-restore -h' or 'iptables-restore --help' for more information. I read about the template not loading all iptables modules so I added modules to the XXX.conf of the VZ virtual machine like this: IPTABLES="ip_tables iptable_filter iptable_mangle ipt_limit ipt_multiport ipt_tos ipt_TOS ipt_REJECT ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_LOG ipt_length ip_conntrack ip_conntrack_ftp ip_conntrack_irc ipt_conntrack ipt_state ipt_helper iptable_nat ip_nat_ftp ip_nat_irc" As the error remained I read that I should build dependencies again on the virtual machine: depmod -a but this returned an error: WARNING: Couldn't open directory /lib/modules/2.6.24-10-pve: No such file or directory FATAL: Could not open /lib/modules/2.6.24-10-pve/modules.dep.temp for writing: No such file or directory So I read again about creating the directory empty and redoing "depmod -a" it. I now don't get the dependancies error but get this and I don't have a clue how to proceed: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Module ip_tables not found. iptables-restore v1.4.4: iptables-restore: unable to initialize table 'raw' Error occurred at line: 2 Try `iptables-restore -h' or 'iptables-restore --help' for more information. I understand that iptables rules have to be different on the VM machine and perhaps some of the rules we are trying to apply (from our physical server) are not compatible but these are just source IP and destination port checks that I would like to be able to have available . I've heard that on the CentOS template there are no issues with this, so I understand is to do with VM config. Any help would be greatly appreciated.

  Read the article

• CUPS causes printer to click and doesn't print

  - by Pez Cuckow

  I'm suffering a strange problem with my Cannon iP4850 when trying to use CUPS on a Raspberry Pi (this is not RPi specific, please do not vote to move it). When I plug the printer into my Laptop (OSX) or my Desktop W7 it identifies as a iP4800 and prints perfectly. So I plug it into the Pi (running debian), set it up in CUPS enable sharing and can now see the iP4800 series shared on the network. However if I print to it (using AirPrint etc...); the file gets to CUPS safely (shows in the queue) but when it tries to print the printer clicks (like a loud thunk) 3/4 times and then gives in, with a double amber flashing light. In cups it shows as job completed. Do you know why using the pi and cups would cause what appears to be a hardware fault and what I can do to fix the problem or to provide further debug info? Thanks for your time! Description: Canon iP4800 series Location: Lounge Driver: Canon PIXMA iP4800 - CUPS+Gutenprint v5.2.9 (color, 2-sided printing) Connection: usb://Canon/iP4800%20series?serial=2239B2 Note: I've tried deleting and re-adding the printer to the Laptop, Desktop and PI and the results are always the same Log for plugging in printer and printing (attempting to) something until the printer turned off again pi@pezpi /var/log $ dmesg [ 7284.176336] usb 1-1.2: new high speed USB device number 8 using dwc_otg [ 7284.279703] usb 1-1.2: New USB device found, idVendor=04a9, idProduct=10d5 [ 7284.279750] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7284.279771] usb 1-1.2: Product: iP4800 series [ 7284.279786] usb 1-1.2: Manufacturer: Canon [ 7284.279800] usb 1-1.2: SerialNumber: 2239B2 Setting cups to verbose: Change loglevel in cupsd.conf to debug (or debug2) pi@pezpi /var/log $ sudo vim /etc/cups/cupsd.conf pi@pezpi /var/log $ sudo /etc/init.d/cups restart [ ok ] Restarting Common Unix Printing System: cupsd. pi@pezpi /var/log $ Log from $ /var/log/cups/error_log is at http://pastebin.com/7VZMRMrG (too large to post here) The log contains - in order (deleted the log and then did the beneath) Restarting the cups server Attempting to print a test page x2 Printing from 192.168.1.90 via AirPrint Printing from 192.168.1.90 via Network Print Turning the printer off and on again

  Read the article

• probems using ssh from cron

  - by Travis

  I am attempting to automate a script that executes commands on remote machines via ssh. I have public key authentication setup between the machines using ssh-agent. The script runs fine when executed from the command prompt. I suspect my problem is that cron isn't starting the ssh-agent due to it's minimalist environment. Here is the output when I add the -v flag to ssh: debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: gssapi-with-mic debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering public key: /home/<user>/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 149 debug1: PEM_read_PrivateKey failed debug1: read PEM private key done: type <unknown> debug1: Trying private key: /home/<user>/.ssh/id_dsa debug1: Next authentication method: password debug1: Authentications that can continue: publickey,gssapi-with-mic,password Permission denied, please try again. debug1: Authentications that can continue: publickey,gssapi-with-mic,password Permission denied, please try again. debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: No more authentication methods to try. Permission denied (publickey,gssapi-with-mic,password). How can I make this work? Thanks!

  Read the article

• IIS permission configuration issue

  - by Dan

  Sorry the title of this question is a little ambiguous but I don't really have any idea where the issue lies - I'm seeking some clarification of the server error logs. Basically, I had a dedicated server running Windows 2003 and Plesk (v8 I think). Last week the server hardware failed and the entire thing had to be rebuilt from scratch. New hardware was put in, new operating system (Win2008), new Plesk installation (v9.5), new software (MSSQL etc) then all data ported over manually from old C and D drives to restore all 30 client sites. It was hell! All has been okay for a couple of days now but about an hour ago POP! Suddenly all sites went down giving a 500 error. Restarting all services eventually brought everything back online, but I'm now living in total fear. It can - and probably will - happen again. The guys on support gave me the following errors from the server log: The Template Persistent Cache initialization failed for Application Pool 'ASP.NET v4.0 Classic' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. The worker process for application pool 'domain1.com(domain)(2.0)(pool)' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\domain1.com(domain)(2.0)(pool).config', line number '0'. The data field contains the error code. The worker process for application pool 'PleskControlPanel' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\PleskControlPanel.config', line number '0'. The data field contains the error code. The support guys are so ambiguous about this and it scares me horribly. Can anyone positively identify the cause of this error which lead to all client website going offline? What can be done to prevent it from happening again? Any pointers would be very much appreciated! Thanks folks...

  Read the article

• Multicast hostname lookups on OSX

  - by KARASZI István

  I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you!

  Read the article

• Google Chrome doesn't want to access Facebook

  - by Pieter van Niekerk

  I have been experiencing a bit of a problem with Chrome over the last couple of days where it doesn't want to access Facebook. When I open Chrome it works fine for a while and then if I were to refresh the page it would give me the Chrome 'This webpage is not available' message. This webpage is not available Google Chrome could not load the webpage because www.facebook.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection. Here are some suggestions: Reload this webpage later. Check your Internet connection. Restart any router, modem, or other network devices you may be using. Add Google Chrome as a permitted program in your firewall's or antivirus software's settings. If it is already a permitted program, try deleting it from the list of permitted programs and adding it again. If you use a proxy server, check your proxy settings or contact your network administrator to make sure the proxy server is working. If you don't believe you should be using a proxy server, adjust your proxy settings: Go to the wrench menu Options Under the Hood Change proxy settings... LAN Settings and deselect the "Use a proxy server for your LAN" checkbox. This problem only persists when using the proxy and doesn't occur at all when not on the proxy. I have also tried different browsers (IE9 and Firefox 9.01) but it doesn't occur in any of them. This problem goes away for a while when I restart Chrome, only to happen again a couple of minutes later. I have tried deleting the cookies for Facebook without restarting Chrome, but to no avail. I am using Windows7 with Chrome 17

  Read the article

• Is there any free software to check for issues with a DVD drive?

  - by AgentConundrum

  I don't usually play movies on my laptop (prefer the standalone with the tv), but I tried to watch one the other night, and noticed playback was really choppy and had audio artifacts in places. I thought it could be related to memory issues so I rebooted and tried again, but the results were the same. I considered that it could be an issue with the disc, so I tried to clean it but again there was no change. I don't think the problem is with the disc, because I tried another disc and it also had the same problem. I don't think I've ever watched the second disc since I've had it, so it should have been safe in its jewel case. Also, there were no issues when I watched an episode off the first disc in my standalone player. What I'm wondering is: are there are any (free) utilities that can check for issues with the drive itself? I looked around but most of the software I found focuses on integrity checks for the disc, not the drive. I have had issues with this laptop recently (had to replace the keyboard when the cat damaged it while I was cleaning dust out and the machine was ripped apart, also replaced part of the chassis after I cracked it when I tried to open it not knowing a screw was still in it) so I may have just replaced the drive incorrectly. I'm going to check on this while I await an answer to this question. Thanks.

  Read the article

• Win 7: apps crash, then explorer crashes, then services fail, then boom

  - by snorfys

  Periodically, every 2-3 days one of my systems will go haywire: every app will crash search will fail via the start menu and then explorer will fail. Restarting explorer via taskmanager will cause it to fail again, then it'll BSOD and restart. The eventlog for when this happens goes something like this every time: ERROR: Session "ReadyBoot" stopped due to the following error: 0xC0000188 (supposedly not a problem) WARNING: The maximum file size for session "ReadyBoot" has been reached... (forget where I found out, but also 'not a problem') ERROR: Session "Circular Kernel Context Logger" stopped due to the following error: 0xC0000188 (again, supposedly not a problem) WARNING: The maximum file size for session "Circular Kernel Context Logger" has been reached... ERROR: Faulting application name: Explorer.EXE, version: 6.1.7600.16450, time stamp:... ERROR: Faulting application name: explorer.exe, version: 6.1.7600.16450, time stamp:... ERROR: Faulting application name: svchost.exe_iphlpsvc, version: 6.1.7600.16385, time stamp:... ERROR: The Service Name service terminated unexpectedly. It has done this 1 time(s) That last one happens a number of times but with a different service name. Then finally we have: ERROR: The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Server service, but this action failed with the following error: An instance of the service is already running. After that, I have my BSOD and logs complaining that windows started up without shutting down. It's a new machine: Intel i3 530 4gb RAM (Ran memtest for 4 hrs, no problems) 320GB WD/250GB Seagate HDDs (Happened on fresh installs on 2 separate HDDs) Win7 Pro/Ultimate x64 (wife's copy of pro, my copy of ult, no change) Fresh install + driver and windows update (happened without updates as well) I'm at a bit of a loss as to what I can look at next. Especially since it'll work like a charm for 2-3 days and then it's hooped for a night (I'm on it now in fact - no problems).

  Read the article

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  (Moved here from StackOverflow) Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• Probability of Blade Chassis Failure

  - by ChrisZZ

  In my organisation we are thinking about buying blade servers - instead of rack servers. Of course technology vendors also make them sound very nice. A concern, that I read very often in different forums, is, that there is a theoretical possibility of the server chassis going down - which would in consequence take all the blades down. That is due to shared infrastructure. My reaction on this probability would be to have redundancy and by two chassis instead of one (very costly of course). Some people (including e.g. HP Vendors) try to convince us, that the chassis is very very unlikely to fail, due to many redundancies (redundant power supply, etc.). Another concern on my side is, that if something goes down, spare parts might be required - which is difficult in our location (Ethiopia). So I would ask to experienced administrators, that have managed blade server: What is your experience? Do they go down as a whole - and what is the sensible shared infrastructure, that might fail? That question could be extended to shared storage. Again I would say, that we need two storage units instead of only one - and again the vendors say, that this things are so rock solid, that no failure is expected. Well - I can hardly believe, that such a critical infrastructure can be very reliable without redundancy - but maybe you can tell me, whether you have successfull blade-based projects, that work without redundancy in its core parts (chassis, storage...) At the moment, we look at HP - as IBM looks much to expensive... thanks a lot best regards Christian

  Read the article

• Munin graphing by CGI

  - by Vaughn Hawk

  I have Munin working just fine, but any time I try to do cgi graphing - it just stops graphing... no errors in the log, nothing. I've followed the instructions here: http://munin-monitoring.org/wiki/CgiHowto - and it should be working - here's my munin.conf setup, at least the parts that matter: dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin tmpldir /etc/munin/templates graph_strategy cgi cgiurl /usr/lib/cgi-bin cgiurl_graph /cgi-bin/munin-cgi-graph And then the host info yada yada - graph_strategy cgi and cgrurl are commented out in munin.conf - that's because if I uncomment them, graphing stops working. Again, I get no errors in logs, just blank images where the graphs used to be. Comment out cgi? As soon as munin html runs again, everything is back to normal. I'm running the latest version of munin and munin-node - I've tried fastcgi and regular cgi - permissions for all of the directories involved are munin:www-data - and my httpd.conf file looks like this: ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory /usr/lib/cgi-bin/> AllowOverride None SetHandler fastcgi-script Options ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> <Location /cgi-bin/munin-cgi-graph> SetHandler fastcgi-script </Location> Does anyone have any ideas? Without this working, at least from what I understand, Munin just graphs stuff, even if no one is looking at them - you add 100 servers to graph, and this starts to become a problem. Hope someone has ran into this and can help me out. Thanks!

  Read the article

• Failing Windows Updates with Error Code 800719e4

  - by Kev

  On a number of Vista machines I have now come across the same error - when installing updates everything works fine, until it after it reboots and the rolls back during step 3. On all occasions (where a simple retry hasn't worked) the error code has been 800719e4. On my own laptop I have so far tried the following:- Installed the updates one by one manually - I started on the smallest and one by one have worked towards the largest one which has left me with "Security Update for Windows (KB2286198)" that refuses to install. Renamed all the files in "C:\Windows\Logs\CBS" to "xxx.old" where xxx was the original name with windows update turned off - no change Renamed all the folders in "C:\Windows\SoftwareDistribution" in the same manner - no change Attempted to install it manually "Windows6.0-KB2286198-x86.msu" - no change Tried to un-install IE8 - doesn't work, rolls back at the end (Installing the IE9 Beta when it launched was what alerted me to the issue on this laptop) Ran a "Fix It" thing from the Microsoft Website - no help (Can't find the link now). Tried to recover from the disk - but alas my laptop only has a recovery partition (and was unservice packed original). Ran with nothing running on startup, and only MS services - again no change. Google is being useless with a load of posts trying to get me to call a telephone number with letters in (presumably an American number) The error code appears to mean error log full but no one has any idea which log! The WinUpdate log does indicate the following is the error point though :- 2010-10-23 13:54:48:230 1240 738 Handler WARNING: Got extended error: "POQ Operation SetKeyValue OperationData \Registry\machine\Schema\wcm://Microsoft-Windows-shell32?version=6.0.6002.18287&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\HKEY_CLASSES_ROOT_lnkfile_shellex_DropHandler_defaultValue, @default, , ewAwADAAMAAyADEANAAwADEALQAwADAAMAAwAC0AMAAwADAAMAAtAEMAMAAwADAALQAwADAAMAAwADAAMAAwADAAMAAwADQANgB9AAAA" Has anyone any idea how to fix this once and for all - reinstalling laptop after laptop from scratch is mildly annoying at work where Office and Firefox are the only extras, but even more annoying at home - I don't fancy going through the palaver of reinstalling everything yet again.

  Read the article

• Hardware doesn't work some times

  - by Ali

  I have an Asus n51vf laptop. I bought it not long time ago (less than a month) and installed Windows 7 on it. Since that it wasn't new when I bought it, I don't know, if the problem was occuring before re-installing Windows 7. There are two problems, that might (or might not) have something to do with each other: Problem The less annoying problem is that the screen flickers ONLY on YouTube when scrolling and/or pausing/playing the video or moving the curser over the video. The second more timeconsuming problem is that some of the hardware doesn't work when I turn up the computer. Then I have to reboot the computer and try again. Example: I turn on the computer, and the touchpad doesn't work - I then reboot and it works again. This has so far happened to the screen (leading to a black screen), the keyboard and the touchpad. More frequently the mouse. What have I tried to do so far? I tried reeinstalling the touchpad driver (Synaptic Touchpad driver from Asus Support Page) - didn't help at all. I even tried reinstalling the driver when the non-responding mouse on startup-problem occured (using the keyboard), but it asked me to reboot and didn't help at all. I also installed (and reinstalled) the graphics driver; it's a GeForce GT 130M. Now, the problem never occurs spontaneously - it only appears when booting my computer. I can even use the computer for heavy tasks (games, multiple programs running etc.) with no problem at all. I suspect, that the problem is in some booting mechanism that fails: Maybe the Windows driver loading? Motherboard problems?

  Read the article

• Error - "IR Hardware not detected" - but it's installed/working

  - by Robert

  I am trying to do: Settings-TV-Set up TV signal. During this process I am getting the error "IR Hardware not detected." With the remote, I can select the "try again" button (to re-detect) and it tries again, so the remote works. Plugging in the "IR blaster" doesn't change anything. (I wouldn't expect any difference, but I read a post which said you needed that. I will get Media Center to change channels if I can get that working - but first things first.) I was able to do the setup months ago when I had cable. and everything was fine. I just got DirecTV. (BTW - During the above process, Media Center detects the signal coming in on channel 3. Windows XP Media Center SP3. The TV Tuner card is a Pinnacle TCTV HD PCI. Everything - and I mean everything - has the latest firmware and drivers - as of 4 months ago when I fixed a different problem. So I DON"T WANT TO HEAR the standard answer to check drivers/firmware. THANK YOU.) Thanks for any help.

  Read the article

• Port Forwarding failing only to Ubuntu servers from Draytek router

  - by Rufinus

  I know this is a kinda unusal question, but Draytek support (..which is very eager to solve the issue) seems to reach its limits. Scenario: Draytek Vigor Multiwan router with current firmware. Multiple WAN IP Aliases on one of the wan ports DMZ (or port forwarding doesnt matter) from wan ip alias to internal host currently i have two internal hosts: 192.168.0.51 (Ubuntu) 192.168.0.53 (Debian) both should be accessible from outside via one of the wan ip aliases. both are accessible with their internal ip's at all times (!) If the router gots restartet, both external ips are forwarding to its internal hosts. But after a few minutes up to 2 hours, the ubuntu host is no longer reachable via its external interface. The debian hosts on the other hand is reachable. In what does ubuntu differs from debian ? I know at least of one user with the exact same problem. see http://ubuntuforums.org/showthread.php?p=10994279 Any ideas ? TIA EDIT: via ping diagnostics directly on vigor, 192.168.0.53 is pingable, 192.168.0.51 is not. but both hosts are perfectly reachable from anywhere inside the network. if i restart ubuntu networking it works again for a short time.... i'm out of ideas.. EDIT 2: after further investigation, i noticed a ping from .51 to the network (or a host in the internet) is enough to make the port-forwarding working again. So i will add an Cronjob as a "keep-alive" ping. This will solve the problem, but the reason for this behaivor is still in the dark. Thanks to all commentors.

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >