Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 157/1359 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

  • "wrong fs type, bad option, bad superblock" error while mounting FAT Drives

    - by cshubhamrao
    I am unable to mount any fat32 or fat16 formatted usb disks under Ubuntu 13.10. The thing here to note is that it is happening only with fat formatted Disks. ntfs, ext formatted external usb disks work well (I tried formatting the same with ext4 and it worked) While mounting via nautilus: Error while mounting from terminal: root@shubham-pc:~# mount -t vfat /dev/sdc1 /media/shubham/n mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so As suggested by the error: Output from dmesg | tail root@shubham-pc:~# dmesg | tail [ 3545.482598] scsi8 : usb-storage 1-1:1.0 [ 3546.481530] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.26 PQ: 0 ANSI: 5 [ 3546.482373] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3546.483758] sd 8:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 3546.485254] sd 8:0:0:0: [sdc] Write Protect is off [ 3546.485262] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3546.488314] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3546.499820] sdc: sdc1 [ 3546.503388] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 3547.273396] FAT-fs (sdc1): IO charset iso8859-1 not found Output from fsck.vfat: root@shubham-pc:~# fsck.vfat /dev/sdc1 dosfsck 3.0.16, 01 Mar 2013, FAT32, LFN /dev/sdc1: 1 files, 1/1949978 clusters All normal Tried re-creating the whole partition table and then formatting as fat32 but to no avail so the possibility of corrupted drive is ruled out. Tried the same with around 4 Disks or so and all have the same things

    Read the article

  • Ubuntu one, music streaming

    - by iknowshall
    I'm running Ubuntu 11.10, and just signed up for Ubuntu One and Ubuntu One Music. Generally file sync is working fine, but music has been a complete failure so far. Here's what I'm looking at: After 24 hours, not a single mp3 or ogg file from my laptop has sync'd to the Cloud Music folder. I have 4 gigs of data used, which is definitely not enough to include music files. That's about the right amount for my docs and photos. With music, it should be more like 13 gigs. No music shows up on the Ubuntu One Music app on my phone, nor on the web view of my Ubuntu One Cloud folder I followed all the online instructions I could find. Basically, on my laptop, right click on the Music folder and select "Ubuntu One Synchronize this folder" The Music folder now has a green check mark on it indicating its sync'd The Ubuntu One app on my laptop says "File Sync is up to date" I did provide credit card information, and on the Ubuntu One website "Music Streaming" is listed as one of my services. So what am I doing wrong? Just read this post as I'm experiencing the same problem, the answer for this post says that due to the large number of files trying to be uploaded, that it could take up to a week. However I am, as above also being told that "File sync is up to date" Can somebody confirm that this is a bug and that I just need to wait for File sync to actually be up to date? Cheers

    Read the article

  • How can I install Cinnamon on Ubuntu 12.04 and eliminate the following errors:

    - by jaorizabal
    $ sudo apt-get install cinnamon cinnamon-session cinnamon-settings Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'cinnamon' instead of 'cinnamon-session' Note, selecting 'cinnamon' instead of 'cinnamon-settings' Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help resolve the situation: The following packages have unmet dependencies: cinnamon : Depends: gir1.2-muffin-3.0 but it is not going to be installed Depends: libcogl5 (>= 1.7.4) but it is not installable Depends: libmuffin0 (>= 1.0.0-0ubuntu1~precise) but it is not going to be installed Recommends: gnome-themes-standard but it is not going to be installed Recommends: gnome-session-fallback but it is not going to be installed E: Unable to correct problems, you have held broken packages. I added this PPA: sudo add-apt-repository ppa:merlwiz79/cinnamon-ppa Then ran the following command: sudo apt-get update && sudo apt-get install cinnamon cinnamon-session cinnamon-settings How can I install the latest Cinnamon desktop? How can I fix this error?

    Read the article

  • dependency problems at installation from mysql-server-5.5

    - by Furtano
    qcons@014-QCONS:/var/lib$ sudo apt-get install -f mysql-server Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig mysql-server ist schon die neueste Version. 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. 2 nicht vollständig installiert oder entfernt. Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren [J/n]? j mysql-server-5.5 (5.5.28-0ubuntu0.12.04.2) wird eingerichtet ... 121112 11:16:52 [Note] Plugin 'FEDERATED' is disabled. 121112 11:16:52 InnoDB: The InnoDB memory heap is disabled 121112 11:16:52 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121112 11:16:52 InnoDB: Compressed tables use zlib 1.2.3.4 121112 11:16:52 InnoDB: Initializing buffer pool, size = 128.0M 121112 11:16:52 InnoDB: Completed initialization of buffer pool 121112 11:16:52 InnoDB: highest supported file format is Barracuda. 121112 11:16:53 InnoDB: Waiting for the background threads to start 121112 11:16:54 InnoDB: 1.1.8 started; log sequence number 1595675 121112 11:16:54 InnoDB: Starting shutdown... 121112 11:16:54 InnoDB: Shutdown completed; log sequence number 1595675 start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: Fehler beim Bearbeiten von mysql-server-5.5 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück dpkg: Abhängigkeitsprobleme verhindern Konfiguration von mysql-server: mysql-server hängt ab von mysql-server-5.5; aber: Paket mysql-server-5.5 ist noch nicht konfiguriert. dpkg: Fehler beim Bearbeiten von mysql-server (--configure): Abhängigkeitsprobleme - verbleibt unkonfiguriert Es wurde kein Apport-Bericht verfasst, da die Fehlermeldung darauf hindeutet, dass dies lediglich ein Folgefehler eines vorherigen Problems ist. Fehler traten auf beim Bearbeiten von: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • QJackCtl - Alsa Unknown driver

    - by user69458
    Here's my problem : I just have installed QJackCtl on my Ubuntu 12.04 and when I start Jack I got this issue : 12:01:22.769 /usr/local/bin/jackd -dalsa -dhw:0 -r44100 -p1024 -n3 -i1 -o2 Cannot connect to server socket err = Aucun fichier ou dossier de ce type Cannot connect to server socket jack server is not running or cannot be started Unknown driver "alsa" If anyone knows the solution It would help me a lot !

    Read the article

  • Ubuntu Server available updates

    - by Rapture
    In Ubuntu 11.04 Server when I would log in via ssh it would tell me how many packages are available for updating in the welcome message. After upgrading to 11.10 I no longer get that information. Is there a package I need to install or a config file that needs changing? 11.04 output: Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 32 packages can be updated. 8 updates are security updates. Last login: Mon Nov 21 16:19:01 2011 from han-solo.local 11.10 output: Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-server x86_64) * Documentation: https://help.ubuntu.com/11.10/serverguide/C No mail. Last login: Tue Nov 22 19:07:19 2011 from han-solo.local

    Read the article

  • How can I set a per terminal bell with xterms?

    - by Owen Maresh
    I'm using natty. I'm using classic. I use raw xterms (the latest build, 270, in fact). I've done xset b 100 pactl upload-sample /usr/share/sounds/ubuntu/stereo/message.ogg bell.ogg But I want something more fine grained than this: I want to say "if the bell originated in some particular pseudoterminal make a particular sound, but if it originated in some other particular pseudoterminal, generate some other sound"

    Read the article

  • Ubuntu 12.04 / 12.10 Randomly Freezing - nVidia?

    - by Alix Axel
    My Ubuntu install frequently freezes, sometimes showing a black screen (not very common anymore - in my latest installs), some other times the mouse and keyboard just fail to move and respond (not even Ctrl + Alt + F1 works) and some other times I'm able to move the mouse with a huge delay (2-5 seconds) but I'm not able to do/click anything. I have a pretty strong feeling that this problem is related to my graphic card drivers because: after hard reset, I usually get error reports about X.org / jockey it's common for artifacts to appear during loading / shutdown / whenever, for instance: pattern filled with £ during log off ugly-colored squared pattern during boot windows that are partially moved (i.e.: only the top half) Firefox renderings that leave the bottom ~30% of the page black These artifacts appear right before the system freezes. I've installed Ubuntu 12.04 LTS and after several failed attempts to get my dual monitor setup to work properly I tried installing the new 12.10 version, hoping that this new version would have this problem solved... Unfortunatly, that was not the case, so I reverted to Ubuntu 12.04. I've tried all the drivers in the Additional Drivers application (even the experimental ones), I've also tried the nvidia-current package from the PPA repository ubuntu-x-swat/x-updates as well as the nouveau OSS driver. Nothing (except no driver at all with a 640*480 resolution) at all seems stable. Here is the info of my graphic card: alix@alix-E500:~$ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [GeForce 8400M G] (rev a1) alix@alix-E500:~$ sudo lshw -C video [sudo] password for alix: *-display description: VGA compatible controller product: G86 [GeForce 8400M G] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:fd000000-fdffffff memory:d0000000-dfffffff memory:fa000000-fbffffff ioport:cc00(size=128) memory:fe0e0000-fe0fffff Right now, I don't even have my 22" monitor connected as I can't even get my laptop display to work properly and without freezes. I've searched, read and tried all that I could (over several fresh reinstalls) to fix the problem, but so far, no solution has proven definitive. I'm sorry I can't precise which symptom maps to each driver but I've been trying to solve this one on my own without logging what I'm doing, perhaps someone here will be able to point me to a certain-fix solution, if not I'll keep updating this question as I go along. Please let me know if any more info is needed to pinpoint the exact problem. Trying out NVIDIA accelerated graphics driver (version 173). The scrolling, minimizing / maximizing windows takes between 2 and 5 seconds to finalize. Context menus also pop up very slowly and the typing seems delayed by ~1 second. No critical issues so far. Firefox rendering of the Save Edits button is consistently messed up (random black lines in the top). Trying out NVIDIA accelerated graphics driver (version current) [Recommended]. All the delays mentioned above and the buggy rendering of the Save Edits button are gone, but I'm noticing that the whole screen flashes black for a couple of microseconds and while I was writing this test for the first time, the bottom 30% of the screen went black and I couldn't do anything (not even Ctrl + Alt + F1 would work). Had to force a hard reset. Also, the system hanged a little for a couple of seconds with the fade out of the "Restart" menu. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-304). Same symptoms as before, it crashed once while I was trying to install Chromium and again after a hard reset when I was trying to remove the driver. The bottom of the screen did not went black and I could move my mouse both times. Ctrl + Alt + F1 didn't work. The ugly-colored pattern also showed up during the second boot. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-307). The system crashed as soon as I clicked something. Had to do a fresh re-install. Trying out Nouveau: Accelerated Open Source driver for nVidia cards. Artifacts still show up during boot but other than that this one seems stable. As soon as I connected my second monitor, the responsiveness dropped a lot, animations and video are somewhat slow. I'm gonna try this solution http://askubuntu.com/a/98871/9018 later on.

    Read the article

  • How to boot Ubuntu 12.04-64bit from a USB from Compaq CQ58

    - by user208092
    I try to boot Ubuntu 12.04, 64-bit on my Compaq CQ58 laptop from a USB but it is not working. I've correctly installed the Ubuntu on my pen drive following the instructions on Ubuntu website. (http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows) These are my BIOS settings: Post Hotkey Delay (sec) <0 CD-ROM Boot Internal Network Adapter Boot Network Boot Protocol Legacy Support Secure Boot Platform Key Enrolled Pending Action None Clear All Secure Boot UEFI Boot Order: USB Diskette on Key/USB Hard Disk OS Boot Manager Internal CD/DVD ROM Drive ! Network Adapter With these settings when i restart my computer what shows up is: Boot Device Not Found. This is what I get on the Boot Manager: Boot Option Menu OS boot Manager Boot From EFI File (Arrow Up) and (Arrow Down) to change option, ENTER to select an option. Press F10 to BIOS Setup Options, ESC to exit. PLEASE HELP... P.S. My laptop has windows 8

    Read the article

  • Chainload boot of Ubuntu installed on 32GB SD card from legacy Grub boot on USB

    - by Gary Darsey
    I have Ubuntu installed on a 32 GB SD card (in the Storage Expansion slot on an Acer Aspire One) with Grub2 installed in the same partition. I boot into legacy Grub on a USB drive and would like to boot by chainloading Grub2 from Grub (kernel/initrd or symlink booting would also be fine), but I haven't figured out how to do this from legacy Grub CLI. Output from blkid for this partition is /dev/mmcblk0p1: LABEL="Ubuntu" UUID="7ceb9fa7-238c-4c5d-bb8e-2c655652ddec" TYPE='ext4" / fdisk -lu information Boot indicator ID 83. Related entries in grub.cfg: search --no-floppy --fs-uuid --set-root 7ceb9fa7-238c-4c5d-bb8e-2c655652ddec linux /boot/vmlinuz-3.5.0-17-generic root=UUID=7ceb9fa7-238c-4c5d-bb8e-2c655652ddec... initrd /boot/initrd.img-3.5.0-17-generic I can't seem to replicate this in legacy Grub. Is there any way get Grub2 to chainload? How do I set root with UUID in legacy Grub? I prefer to boot from USB. Would Grub2 on USB (copying the grub.cfg generated during installation) be an option?

    Read the article

  • How to make bash quit tab autocompleting hidden directories

    - by Kristopher Micinski
    Most of the time, I don't need autocompletes for my hidden directories. In fact, that's the point of them being hidden! However, annoyingly, bash takes these directories into account when considering tab autocompletion. This is particularly annoying when I have the following scenario: a .svn foler along with a single folder that I want to traverse into by simply pushing tab. (This typically comes up with deep Java packages...) Is there any way to change the default behavior? Worst case scenario I have to type '.' before tab, which seems like a no brainer for my usability.

    Read the article

  • 12.04 installation started to black screen during boot today

    - by Cedric
    NOTE: Most of this question is now irrelevant. UPDATE 3 summarizes the problem as it stands. I've been running 12.04 on my Lenovo laptop for one month now (updated from 11.04), and I have not had any significant problem until today. This morning, when I boot, I pass the Grub screen, then I get to the purple loading screen with dots as usual, then for some reason I got to the terminal login, with no GUI. startx gives me a black screen. Ctrl+F7-F8 didn't help either. It's similar to: After the update today no graphical interface anymore - 12.04 I followed the instructions at the end, to flush the ATI drivers (which I had installed), and fall back to the community drivers. That made me lose the login! Now I just get a black screen after the Ubuntu loading screen. I can still access the console through recovery, and I've gotten into VESA mode once or twice (not reproducible, for some reason). I've tried various permutations of xorg.conf, without success. Xorg -configure fails for now, though I might be able to get it to work. apt-get update/upgrade doesn't improve anything either. However, both Windows and the 12.04 Live CD still work beautifully, and I know that all my data is still there. Is there any way that I could somehow take the configuration from the Live CD and roll with it? I know that I could reinstall, but that sucks, frankly, especially given that there's no straight-forward way of keeping the home (which, incidentally, is unaccessible from the Live CD) Thank you. Update: it seems that the fglrx drivers are still active, even after I've --purged them. From Xorg.0.log: [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] (WW) fglrx(0): * DRI initialization failed * [ 18.235] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible * [ 18.235] (WW) fglrx(0): * 2D and 3D acceleration disabled * [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] Fatal server error: [ 18.235] AddScreen/ScreenInit failed for driver 0 There's also a mention of the "fbdev" module. What is it? PARTIALLY SOLVED: I've undone the damage from the fglrx purge. I'm still mystified as to why uninstalling the packages didn't kill fglrx entirely, but I've now recovered the prompt. The solution to the DRI initialization error was to add radeon.modeset=0 to the GRUB boot options. So I'm back to being dropped to a prompt without any GUI. startx gives me a bunch of messages, though no obvious errors. I have little reason to suspect the video drivers, as they worked fine before today. There is no apparent error message in any of the log files. UPDATE: When I startx, I get an error, Plymounth command failed mountall: Disconnected from Plymouth This is all over the Internet, but I have not found anything that works for me yet. UPDATE 3: If I press ESC during boot, the splash screen (Plymouth!) disappears, and I no longer have any error from Plymouth. The last error message is: Stopping mount filesystems on boot I can then Ctrl+Alt+F1 to get the TTY1, but startx still does not work. Sadly, the Internet knows nothing about this error message, and neither do I. Help!

    Read the article

  • apt-get error, cannot install many packages?

    - by tech
    How do I fix this? It shows an error, and I don't know how to fix it. I want to install crossover. Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... failed. The following packages have unmet dependencies: crossover:i386 : Depends: libc6:i386 (>= 2.3) but it is not installed Depends: libice6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libsm6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libx11-6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libxext6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libfreetype6:i386 but it is not installed Depends: libz1:i386 Depends: perl5-base:i386 Depends: perl-modules:i386 but it is not installable Depends: python:i386 (>= 2.4) but it is not installed Depends: python-gtk2:i386 but it is not installed Depends: python-glade2:i386 but it is not installed Depends: desktop-file-utils:i386 but it is not installed Depends: libasound2:i386 but it is not installed Depends: libgl1:i386 Depends: libxrandr2:i386 but it is not installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies EDIT I have another recent error. You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: crossover:i386 : Depends: libc6:i386 (= 2.3) but it is not installed Depends: libice6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libsm6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libx11-6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libxext6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libfreetype6:i386 but it is not installed Depends: libz1:i386 Depends: perl5-base:i386 Depends: perl-modules:i386 but it is not installable Depends: python:i386 (= 2.4) but it is not installed Depends: python-gtk2:i386 but it is not installed Depends: python-glade2:i386 but it is not installed Depends: desktop-file-utils:i386 but it is not installed Depends: libasound2:i386 but it is not installed Depends: libgl1:i386 Depends: libxrandr2:i386 but it is not installed E: Unmet dependencies. Try using -f. running " apt-get -f install " gives me the same error everytime.

    Read the article

  • How can I reinstall XRandR without serious disruption to 12.04?

    - by broiyan
    This is the sequence that leads to xrandr going missing: Installed 12.04 on a system with a motherboard using the Intel G45 chipset and the E8400 Core 2 Duo and AMD Radeon HD 5450 video card. Installed fglrx when ubuntu prompted via Additional Drivers. Ran Catalyst (Administrative) to select multi-desktop and rebooted. Ran Catalyst (Administrative) to select Xinerama and rebooted. Answer yes to about 3 prompts that request to send bug reports to ubuntu. At this point Settings > Appearances no longer offers the widget that allows you to resize the Unity Launcher icons. Also Settings > Displays says randr extension is not present. BTW: This same sequence is repeatable, including the issues with the missing icon resizer and xrandr, so there is clearly bug fixing potential here. How can I get xrandr reinstalled without un-installing a large set of dependencies? I realize that if I un-install xrandr I will have the chance to re-install but the number of dependencies is large and so an un-install will cause many systems to be un-installed and I am afraid that will ruin Ubuntu 12.04. Hence, I'm looking for a more direct fix. I thought rebooting the .ISO disk and reinstalling would be a good fix but obviously not since this problem is repeatable.

    Read the article

  • Disk space suddenly 100% used?

    - by dannymcc
    I'm trying to identify why, suddenly, 100% of our disk space is in use. I have already rebooted but the issue persists. Here are the outputs of some commands that are showing some strange (for me) results: danny@hydrogen:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/cciss/c0d0p1 130G 122G 949M 100% / none 1.9G 196K 1.9G 1% /dev none 2.0G 0 2.0G 0% /dev/shm none 2.0G 40K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw danny@hydrogen:/$ sudo du -chs / du: cannot access `/proc/1662/task/1662/fd/4': No such file or directory du: cannot access `/proc/1662/task/1662/fdinfo/4': No such file or directory du: cannot access `/proc/1662/fd/4': No such file or directory du: cannot access `/proc/1662/fdinfo/4': No such file or directory danny@hydrogen:/$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/cciss/c0d0p1 135342296 128144108 323104 100% / none 1991336 196 1991140 1% /dev none 1995788 0 1995788 0% /dev/shm none 1995788 40 1995748 1% /var/run none 1995788 0 1995788 0% /var/lock none 1995788 0 1995788 0% /lib/init/rw danny@hydrogen:/$ mount /dev/cciss/c0d0p1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) danny@hydrogen:/$ sudo du -h --max-depth=1 634M ./premvet_sync 5.6M ./etc 4.0K ./opt 16K ./lost+found 7.4M ./bin 623M ./lib 196K ./dev 0 ./sys 4.0K ./srv 4.0K ./cdrom 8.0K ./media 52K ./tmp ... it hangs for ages here..... The server is running Ubuntu 10.04.4 LTS. System load: 2.85 Temperature: 8 C Usage of /: 94.7% of 129.07GB Processes: 132 Memory usage: 39% Users logged in: 0 Swap usage: 0% IP address for eth0: 192.168.1.124 => / is using 94.7% of 129.07GB I'm struggling to comprehend why this is happening! Any pointers would be appreciated.

    Read the article

  • How can I login to lightdm with password for fingerprint-enabled user after 12.10 upgrade?

    - by jxn
    Sorry for the long question. I have a laptop with ubuntu quantal 12.10, a fingerprint scanner, and a few active user accounts. When the machine boots up to lightdm, I get a prompt toenter my password or scan my finger print. Every now and then, fingerprint scanning just doesn't seem to work. Before the 12.10 upgrade, I was always able to enter my password for this user when fingerprint failed. Now, no matter what, I have to scan my prints to login as this user. If I try to login as a different user (fingerprint is not enabled for any others), I can see the password is typed out -- asterisks show in the password input box as I type them -- and get in. Not so for the fingerprint user. Any clues on how to figure out what's gone wrong?

    Read the article

  • Dell Inspiron 1120 Ubuntu Light -> Desktop and now I'm having problems with wifi and suspend

    - by David N. Welton
    I got a Dell Inspiron 1120 which ships with Ubuntu Light, as well as Windows. My wife prefers Ubuntu, but obviously outside of web stuff, you can't do a lot with Light, so I went ahead and installed the Desktop version of Ubuntu (10.10 / maverick). Whereas before it suspended beautifully and connected to wifi networks flawlessly, it now displays the following problems: It seems to suspend ok, but on resume, the screen remains blank, even though the computer appears to wake up again. Wifi doesn't connect. I tried using the suggested proprietary drivers, and those don't seem to change the situation. All in all, a bit frustrating to run into these sorts of "regressions" - does anyone know what sort of drivers and such Ubuntu Light might have shipped with for this computer that made it work so well? Unfortunately, I wiped the disk in order to install the Desktop version of Ubuntu.

    Read the article

  • How do I get a CardScan 60 II working with SANE?

    - by TiuTalk
    I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

    Read the article

  • AFP and SAMBA shares are confusing my MacOS X Lion

    - by Pierre
    I've setup my file server running ubuntu 12.04 with AFP/Avahi and Samba shares. Simple configuration, nothing too complicated. I've given my AFP machine a different name than %h to avoid confusion when looking into my Finder. However, my mac os lion mbp still confuses the two and the only way to access the AFP shares is via direct connect to IP address. The samba machine name seems to be hardwired to hostname (I can only see that that workgroup can be changed). Is there anything I am missing or obvious that I need to set? Best regards and thank you in advanced Pierre

    Read the article

  • Unable to install Inkscape on ubuntu 14.02

    - by Anum Khan
    Hi I am new to Linux Ubuntu 14.04. I wanted to install Inkscape but it has shown following error(Dependencies as it says): inkscape: Depends: python:any (>= 2.7.1-0ubuntu2) but it is a virtual package Depends: libaspell15 (>= 0.60.7~20110707) but 0.60.7~20110707-1ubuntu1 is to be installed Depends: libatkmm-1.6-1 (>= 2.22.1) but 2.22.7-2ubuntu1 is to be installed Depends: libc6 (>= 2.7) but 2.19-0ubuntu6.1 is to be installed Depends: libcairo2 (>= 1.10.0) but 1.13.0~20140204-0ubuntu1 is to be installed Depends: libcairomm-1.0-1 (>= 1.6.4) but 1.10.0-1ubuntu3 is to be installed Depends: libfontconfig1 (>= 2.9.0) but 2.11.0-0ubuntu4.1 is to be installed Depends: libfreetype6 (>= 2.2.1) but 2.5.2-1ubuntu2.2 is to be installed Depends: libgc1c2 (>= 1:7.2d) but 1:7.2d-5ubuntu2 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.9-20140406-0ubuntu1 is to be installed Depends: libgdk-pixbuf2.0-0 (>= 2.22.0) but 2.30.7-0ubuntu1 is to be installed Depends: libglib2.0-0 (>= 2.35.9) but 2.40.0-2 is to be installed Depends: libglibmm-2.4-1c2a (>= 2.36.2) but 2.39.93-0ubuntu1 is to be installed Depends: libgnomevfs2-0 (>= 1:2.17.90) but it is not going to be installed Depends: libgomp1 (>= 4.2.1) but 4.8.2-19ubuntu1 is to be installed Depends: libgsl0ldbl (>= 1.9) but it is not going to be installed Depends: libgtk2.0-0 (>= 2.24.0) but 2.24.23-0ubuntu1.1 is to be installed Depends: libgtkmm-2.4-1c2a (>= 1:2.24.0) but 1:2.24.4-1ubuntu1 is to be installed Depends: libgtkspell0 (>= 2.0.10) but it is not going to be installed Depends: liblcms2-2 (>= 2.2+git20110628) but 2.5-0ubuntu4 is to be installed Depends: libmagick++5 (>= 8:6.7.7.10) but it is not going to be installed Depends: libpango-1.0-0 (>= 1.14.0) but 1.36.3-1ubuntu1 is to be installed Depends: libpangocairo-1.0-0 (>= 1.14.0) but 1.36.3-1ubuntu1 is to be installed Depends: libpangoft2-1.0-0 (>= 1.14.0) but 1.36.3-1ubuntu1 is to be installed Depends: libpangomm-1.4-1 (>= 2.27.1) but 2.34.0-1ubuntu1 is to be installed Depends: libpng12-0 (>= 1.2.13-4) but 1.2.50-1ubuntu2 is to be installed Depends: libpopt0 (>= 1.14) but 1.16-8ubuntu1 is to be installed Depends: libsigc++-2.0-0c2a (>= 2.0.2) but 2.2.10-0.2ubuntu2 is to be installed Depends: libstdc++6 (>= 4.6) but 4.8.2-19ubuntu1 is to be installed Depends: libxml2 (>= 2.7.4) but 2.9.1+dfsg1-3ubuntu4.3 is to be installed Depends: libxslt1.1 (>= 1.1.25) but 1.1.28-2build1 is to be installed Depends: zlib1g (>= 1:1.1.4) but 1:1.2.8.dfsg-1ubuntu1 is to be installed What am I missing?

    Read the article

  • error while installing openoffice

    - by Maulik Shah
    I was installing openoffice using these commands sudo add-apt-repository ppa:upubuntu-com/office sudo apt-get update sudo apt-get install openoffice Now after downloading some 20MB my internet connection interrupted when again it tried to install it says as follows Err http://ppa.launchpad.net/upubuntu-com/office/ubuntu/ precise/main openoffice amd64 3.4~precise Connection failed Failed to fetch http://ppa.launchpad.net/upubuntu-com/office/ubuntu/pool/main/o/openoffice/openoffice_3.4~precise_amd64.deb Connection failed E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? how to solve these errors ?

    Read the article

  • Shockwave Flash crashes with Chromium and Firefox

    - by Stephan
    Since updating to Ubuntu 13.10, Shockwave Flash does not work in Chromium or Firefox. Both show a "Shockwave Flash has crashed" dialog. Chromium 29.0.1547.65 After loading a page with a Flash video, I get this warning on the console twice: NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted). When I try to play the video, it crashes and I receive these disorted error messages: (exe:14868): Gdk-WARNING **: XID collision, trouble ahead [xcb] Extra reply data still left in queue [xcb] This is most likely caused by a broken X extension library [xcb] Aborting, sorry about that. owser --type=plugin --plugin-path=/usr/lib/flashplugin-installer/libflashplayer.so --lang=de --channel=14560.18.20766867: ../../src/xcb_io.c:576: _XReply: Assertion `!xcb_xlib_extra_reply_data_left' failed. Firefox 25.0 With Firefox, I get these errors: ###!!! ABORT: Request 154.24: BadValue (integer parameter out of range for operation); 3 requests ago: file /build/buildd/firefox-25.0+build3/toolkit/xre/nsX11ErrorHandler.cpp, line 157 WARNING: pipe error (110): Connection reset by peer: file /build/buildd/firefox-25.0+build3/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 437 ###!!! [Parent][RPCChannel] Error: Channel error: cannot send/recv What I tried so far Reinstalling flashplugin-installer Changing permissions of /dev/nvidia0 It seems that Flash Aid is no longer available. GPU acceleration is working fine, e.g. for Portal. Does anyone know how to fix this?

    Read the article

  • How does landscape calculate memory usage?

    - by David Planella
    I'm trying to debug an OOM situation in an Ubuntu 12.04 server, and looking at the Memory graphs in Landscape, I noticed that there wasn't any serious memory usage spike. Then I looked at the output of the free command and I wasn't quite sure how both memory usage results relate to each other. Here's landscape's output on the server: $ landscape-sysinfo System load: 0.0 Processes: 93 Usage of /: 5.6% of 19.48GB Users logged in: 1 Memory usage: 26% IP address for eth0: - Swap usage: 2% Then I ran the free command and I get: $ free -m total used free shared buffers cached Mem: 486 381 105 0 4 165 -/+ buffers/cache: 212 274 Swap: 255 7 248 I can understand the 2% swap usage, but where does the 26% memory usage come from?

    Read the article

  • openssl/rand.h header file not found

    - by Arun Reddy Kandoor
    I have installed libssl-dev package but that did not install the include files. How do I get the openssl include files? Appreciate your help. Checking for program g++ or c++ : /usr/bin/g++ Checking for program cpp : /usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /usr/bin/ranlib Checking for g++ : ok Checking for node path : ok /usr/bin/node Checking for node prefix : ok /usr Checking for header openssl/rand.h : not found /home/arun/Documents/webserver/node_modules/bcrypt/wscript:30: error: the configuration failed (see '/home/arun/Documents/webserver/node_modules/bcrypt/build/config.log') npm ERR! error installing [email protected] npm ERR! [email protected] preinstall: `node-waf clean || (exit 0); node-waf configure build` npm ERR! `sh "-c" "node-waf clean || (exit 0); node-waf configure build"` failed with 1 npm ERR! npm ERR! Failed at the [email protected] preinstall script. npm ERR! This is most likely a problem with the bcrypt package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node-waf clean || (exit 0); node-waf configure build npm ERR! You can get their info via: npm ERR! npm owner ls bcrypt npm ERR! There is likely additional logging output above. npm ERR! npm ERR! System Linux 3.8.0-32-generic npm ERR! command "node" "/usr/bin/npm" "install" npm ERR! cwd /home/arun/Documents/webserver npm ERR! node -v v0.6.12 npm ERR! npm -v 1.1.4 npm ERR! code ELIFECYCLE npm ERR! message [email protected] preinstall: `node-waf clean || (exit 0); node-waf configure build` npm ERR! message `sh "-c" "node-waf clean || (exit 0); node-waf configure build"` failed with 1 npm ERR! errno {} npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/arun/Documents/webserver/npm-debug.log npm not ok

    Read the article

  • How do I install an older 2.6.37 Kernel Version?

    - by Seyed Mohammad
    I have a Sony VAIO P netbook and for several issues (graphics driver, audio driver and power management), I want to install an older version of the Linux kernel on Ubuntu 11.10 (actually its Xubuntu) that seems to be much more suitable. So I searched for Ubuntu kernels and found this link which includes all versions of the Linux kernel distributed by Ubuntu. I am looking for a version before 2.6.38 (to escape the known power management issue) and of course solve my many driver problems! I guess my best bet is 2.6.37 but there are several 2.6.37.x-x kernels! Can someone point me to the right choice? In each folder (for example: this one) there are several DEB packages. Which packages should I install? (Note: I have a 32-bit system) What is the installation process? sudo dpkg -i *.deb ? Is this fine or additional steps are required? Thanks.

    Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >