Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 160/1359 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

• How to start a task before networking?

  - by user1252434

  I've written an upstart task that modifies /etc/network/interfaces. (Actually a file sourced into it.) Which start on condition do I need to declare to let my task run before any networking jobs? I've tried start on starting networking, but that's apparently too late. When I log in after booting I can see that the changes were written, but obviously they are not used: the new config states a static IP, but the boot process waits for a non-existing DHCP server (old config) to time out. I've also tried start on starting network-interface INTERFACE=eth0, which didn't work either. IIRC there was an error in the log that the change couldn't be written. Background: I need a VM template that can be cloned and the clones configured through a script. Among other settings, I need to give them a static IP address to access them from the host. I use guestfish to write a config file to one of the virtual disks and let a script apply these settings to the system. I don't want that disk to contain an actual system settings file. I can't modify /etc directly, because that disk is shared (copy-on-write/diff) among the clones and guestfish apparently doesn't support that type of image. I could also let them use DHCP and setup a server that assigns IP by MAC, but I'm afraid of the complexity. I could also add just another virtual disk for configuration files, but if possible I'd prefer to store settings directly on the system disk image. Used software: Ubuntu Server 12.04, VirtualBox. The configuration modifier is a self written ruby script.

  Read the article

• How to solve package issues/dependencies

  - by Wolfgang Kuehne

  Background info I am trying to install Veins simulation environment by following the tutorial provided by the author. In step 1 it is required to install some packages in Linux, the tutorial suggest this commands to be executed on Terminal: sudo apt-get install build-essential gcc g++ bison flex perl tcl-dev tk-dev blt libxml2-dev zlib1g-dev default-jre doxygen graphviz libwebkitgtk-1.0-0 openmpi-bin libopenmpi-dev libpcap-dev autoconf automake libtool libxerces-c2-dev proj libgdal1-dev libfox-1.6-dev When I execute this command, I immediately get: E: Package 'proj' has no installation candidate Then I remove the proj from the command and execute it again without proj in it, next I get: The following packages have unmet dependencies: libgdal1-dev : Depends: libgdal-dev but it is not going to be installed E: Unable to correct problems, you have held broken packages. So, I remove libgdal1-dev from the command as well. And it executes file, by downloading the remaining packages. To troubleshoot the problem with proj and libdgal1-dev I go to the Synaptic Package Manager. libgdal1-dev I search for libgdal1-dev in Synaptic Package Manager and I get an entry. I Mark for Installation and then Synaptic Package Manager suggests removing libxerces-c2-dev which is actually added via the initial command. Should I trust Synaptic Package Manager with this suggestion, and proceed further? proj What should I do about proj. There are some packages in Synaptic Package Manager such as proj-bin or libproj-dev. Should I install them? I think proj has to do with this and this What should I do to make sure that this simulation tool works fine?

  Read the article

• rake aborted! undefined local variable or method

  - by Subhransu

  In a fresh new Ubuntu machine, I have installed ruby with sudo apt-get install ruby1.8 and then installed rubygem1.8 with : sudo apt-get install rubygems and after that installed rails3.2.8 with : gem install rails The procedure was very simple. But here comes the problem. When I tried checking the version of rake with rake --trace -version I got the following error: rake aborted! undefined local variable or method `rsion' for #<Rake::Application:0xb72c731c> /var/lib/gems/1.8/gems/rake-0.9.2.2/lib/rake/application.rb:316:in `standard_rake_options' /usr/lib/ruby/1.8/optparse.rb:1298:in `eval' /var/lib/gems/1.8/gems/rake-0.9.2.2/lib/rake/application.rb:316:in `standard_rake_options' /usr/lib/ruby/1.8/optparse.rb:1298:in `call' /usr/lib/ruby/1.8/optparse.rb:1298:in `parse_in_order' /usr/lib/ruby/1.8/optparse.rb:1254:in `catch' /usr/lib/ruby/1.8/optparse.rb:1254:in `parse_in_order' /usr/lib/ruby/1.8/optparse.rb:1248:in `order!' /usr/lib/ruby/1.8/optparse.rb:1339:in `permute!' /usr/lib/ruby/1.8/optparse.rb:1360:in `parse!' /var/lib/gems/1.8/gems/rake-0.9.2.2/lib/rake/application.rb:425:in `handle_options' /var/lib/gems/1.8/gems/rake-0.9.2.2/lib/rake/application.rb:74:in `init' /var/lib/gems/1.8/gems/rake-0.9.2.2/lib/rake/application.rb:133:in `standard_exception_handling' /var/lib/gems/1.8/gems/rake-0.9.2.2/lib/rake/application.rb:72:in `init' /var/lib/gems/1.8/gems/rake-0.9.2.2/lib/rake/application.rb:64:in `run' /var/lib/gems/1.8/gems/rake-0.9.2.2/lib/rake/application.rb:133:in `standard_exception_handling' /var/lib/gems/1.8/gems/rake-0.9.2.2/lib/rake/application.rb:63:in `run' /var/lib/gems/1.8/gems/rake-0.9.2.2/bin/rake:33 /usr/local/bin/rake:19:in `load' /usr/local/bin/rake:19 Is it the problem due to I have installed straight from ubuntu apt-get package manager ?

  Read the article

• Ubuntu 11.10 - Everytime i am trying to connect to my box using SSH, its failing not connecting

  - by YumYumYum

  From any other PC doing SSH to my Ubuntu 11.10,is failing. Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 -- apt-get install openipml openhpi-plugin-ipml

  Read the article

• Can't install Ubuntu on a Z68xP-UD3p board

  - by Carl

  I have tried to install Ubuntu version 10, 11 and 12 64 bit on my Gigabyte Z68XP-UD3P motherboard using live CD and placing the DVD in the drive and starting the machine. When I go to install Ubuntu I get a dark screen and no text at all. When I go with Live CD I reboot and then I go right into the install from the boot menu and still get darkness. Nothing appears. I have a i7 intel CPU with Nvida Gefore GTX 560 Ti video board.

  Read the article

• KVM swtitch , screen resolution problem

  - by Vagelism

  I use the lates ubuntu version. Till to day I use it with an acer trravelmate4070 and an LG screen in order to expand my destkop. Works great. Till today that I desided to connect my LG screen to a KVM switch in order to share the big screen with an other pc when I need it. In the KVM switch the resolution is lower and I can not manually change it. I read many solutions about making an .conf file but since I am new to Ubuntu I am afraid , more over I realized that these articles talk for the same problem but not as an expantion screen but as a main screen. Any idea how to config correct this file? I send the links of these articles here: http://robert.penz.name/219/workarou...-kvm-switches/ Where is the X.org config file? How do I configure X there? Thank you!

  Read the article

• Wifi won't enter working net after hard reboot

  - by Terry Smith

  I rebooted the hard way after my system jammed again because FF eats all the ram. (that's a different problem) I've always gotten away with it, but not this time. The system came up ok BUT it absolutely refuses to log onto the local house wifi net. I know the net is ok as the Windows box I'm writing this on is on it right now. I deleted the connection and rentered the password but it will not go on. /var/lib/NetworkManager/NetworkManager.state says everything is turned on. I know this is my fault but I'd really like to get back on the net. The machine is a Toshiba Satellite. Any suggestions?

  Read the article

• Gateway IP Returns to Zero

  - by Robert Smith

  When you set a static IP under Ubuntu 12.04.1, you must supply the desired machine IP and the gateway IP, all using the Network Manager. When I first entered them and rebooted, everything worked great. On the second boot, however, Firefox could find no Web page. Upon checking, I discovered that the gateway IP had returned to zero. Now, no matter how often I resupply it, it returns to zero immediately after NM "saves" it: that is, appears as zero when redisplayed. The only way I can get to the Internet is to restore DHCP operation. I need to use static IP for access to my home network. Would appreciate any suggestion. --Robert Smith

  Read the article

• Mounting with Nautilus works but fstab gives "Host is down" error?

  - by Annan

  I'm connecting to my university's VPN so I can connect to the network drive. The VPN seems to be working fine and I can connect to the drive by typing the address into Nautilus and entering my login details: smb://139.___.___.140/home However, this fstab entry doesn't work: //139.___.___.140/home /media/___ cifs domain=CS,username==___,password=___,uid=sai,gid=sai 0 0 Nor does manually mounting it: sudo mount -t cifs //139.___.___.140/home /media/___ -o domain=CS,username=___,password=___,uid=sai,gid=sai,user The only error it gives is: mount error(112): Host is down Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) It's obvious the host isn't down since I can view the share from Nautilus. Why is Nautilus mounting it fine but not the normal mount command? What could cause this error?

  Read the article

• Install Everpad on Ubuntu 13.10

  - by Muhammad Ahmad Zafar

  I just installed a fresh copy of Ubuntu 13.10 and wanted to install Everpad but there is some issue as the PPA for it is missing it. These were the commands which I execute (took help from http://www.webupd8.org/2012/09/everpad-integrates-evernote-with-ubuntu.html and everywhere its the same): sudo add-apt-repository ppa:nvbn-rm/ppa sudo apt-get update sudo apt-get install everpad The following which what I get when the last command is executed: Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package everpad Please help

  Read the article

• Reinstall of Windows Bootloader not working

  - by MrBoxy

  It first started when I deleted my partition that had Ubuntu 12.04 on it. Little did I realize at the time that it would destroy all the resources of Grub on it, and subsequently prevent me booting into my hibernated windows. So I made a 12.10 Ubuntu live USB and reinstalled windows bootloader. When I rebooted it gave me a bootloader error saying I that it could not find the resources to boot from. So I went back to my live USB and installed boot-repair and tried to repair the mbr. It didn't work though. Here is the URL the boot-repair gave me if I was in trouble: paste.ubuntu.com/1328309 Thanks in advance :)

  Read the article

• Unity 3D (with Nvidia driver) becomes very slow and laggy

  - by Graham

  How can I prevent my Unity 3D desktop from becoming slow after a while, given that I have an Nvidia Quadro NVS 290 graphics in TwinView mode? The desktop starts out fast on login, but becomes slow / lagging / hesitant / high latency after a while, symptoms being spikes in CPU usage by /usr/bin/X whenever I cause any graphical activity with the mouse or keyboard (e.g. typing, changing tabs, dragging windows). The desktop remains slow even with all windows (except htop in Terminal) and extraneous processes killed. Detail: Changing tabs in Terminal takes about a second, and X spikes to 76% CPU. As I type into Firefox, X spikes to 95% CPU. Dragging Termiinal window, X goes to 70% CPU. Basically, every graphical action sends CPU usage of X through the roof. Device: Nvidia Quadro NVS 290 Driver package: binary driver nvidia-current-updates (280.13-0ubuntu5) Dual Monitors: Pair of DELL UltraSharp 1908FP in TwinView (X screen 2560x1024) OS: Fresh install of Ubuntu 11.10 amd64 Desktop with all updates. Hardware: Dell Precision T5400 Workstation Pastebin of Xorg.0.log Pastebin of xorg.conf Pastebin of nvidia-xconfig -t output (easier to read than xorg.conf) Output of /usr/lib/nux/unity_support_test -p: To obtain the following htop screenshow I typed "asdf" several times in in this text box, alt-tabbed to Terminal and took a screenshot of the high X CPU usage. This also happens when firefox is not running: Quadro NVS 290 has "No" thermal sensor according to sensors-detect: Next adapter: NVIDIA i2c adapter 0 at 2:00.0 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No P robing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) I tried the nouveau driver by disabling the nvidia-current-updates under Additional Drivers, but Ubuntu and xrandr -q fail to detect the second monitor. This may be issue 737349. Funniest thing is that Nouveau wiki says that XRandR 1.2 dual-monitor is supported so it should work with a second monitor.

  Read the article

• Bash script not adding variables to session

  - by travega

  I have a bash script that I have added as a startup application. It does a bunch of exports and alias assignment. #! /bin/bash alias devhm='cd ${DEV_HOME}; ll'; alias wlhm='cd ${WL_HOME}; ll'; alias dirch='watch --interval=1 "ls -la"'; alias vols='watch --interval=1 "df -h"'; alias svn-update='svn update --depth infinity ./*'; alias mci="~/mci.sh"; alias vncserver="vncserver -geometry 1680x1050"; alias ..="cd .."; alias hist="history | grep "; export PROXY_HOST=proxy.my.setup; export PROXY_PORT=3128; export LD_LIBRARY_PATH=$LD_LIBRARY_PATH/usr/lib/oracle/12.1/client64/lib; export ORACLE_HOME=/usr/lib/oracle/12.1/client64; export TNS_ADMIN=${ORACLE_HOME}/network/admin; echo "DONE!"; But none of these values are available in my terminal sessions anymore. Even when I run the script straight into the terminal like so: ./setup.sh I see the "DONE!" prompt printed but no aliases or env variables are set. If I copy and paste the contents of the file into the terminal the aliases and env variables are set. I have tried adding a line to execute the script from .bashrc also but still no aliases or env variables set. Any ideas what might be going on here? Also could anyone suggest a better way to have these env variables/aliases added to every terminal session?

  Read the article

• Broadcom BCM4331 not working on new Mac Mini 5,1

  - by Jon

  I can't seem to get my wireless card working on my Mac Mini 5,1. Lspci returns: 03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 02) But running "additional drivers" doesn't detect anything. The nm-applet menu reads "device not ready--firmware missing." What can I do to get this to work? Note, this is with 12.04.1, so many of the previous discussions (for 11.10, etc) probably don't apply here.

  Read the article

• Window borders missing - gtk-window-decorator segmentation fault

  - by Balakrshnan Ramakrishnan

  I have been using Ubuntu for about 1 year now and I got a problem just two days ago. Suddenly I started experiencing a problem with the window borders (title bar with close, maximize, and minimize buttons). The problem : The window borders disappear I run "gtk-window-decorator --replace" For like 20 seconds everything is back to normal But it again returns to the problem. I searched over the Internet and found that my problem is similar to what is specified in this bug report: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/814091 This bug report says that the "fix released". I updated everything using the Update Manager, but still the problem remains. Can anyone let me know whether the problem is fixed? If yes, can you please let me know how to do it? I have already tried normal replace/reset commands like unity --reset unity --replace compiz --replace The "window borders" plugin is on in CCSM (CompizConfig Settings Manager) and it points to "gtk-window-decorator". I use Ubuntu 11.10 on an Intel Core2Duo T6500 with AMD Mobility Radeon HD 4300 graphics card. If you need more information, please let me know.

  Read the article

• Troubleshoot broken ZFS

  - by BBK

  I have one zpool called tank in RaidZ1 with 5x1TB SATA HDDs. I'm using Ubuntu Server 11.10 Oneric, kernel 3.0.0-15-server. Installed ZFS from ppa also I'm using zfs-auto-snapshot. The ZFS file system when zfs module loaded to the kernel hangs my computer. Before it I created few new file systems: zfs create -V 10G tank/iscsi1 zfs create -V 10G tank/iscsi2 zfs create -V 10G tank/iscsi3 I shared them through iSCSI by /dev/tank/iscsiX path. And my computer started to hanging sometimes when I used tank/iscsiX by iSCSI, do not know why exactly. I switched off iSCSI and started to remove this file systems: zfs destroy tank/iscsi3 I'm also using zfs-auto-snapshot so I had snapshots and without -r key my command not destroying the FS. So I issued next command: zfs destroy tank/iscsi3 -r The tank/iscsi3 FS was clean and contain nothing - it was destroyed without an issue. But tank/iscsi2 and tank/iscsi1 contained a lot of information. I tried zfs destroy tank/iscsi2 -r After some time my computer hang out. I rebooted computer. It didn't boot very fast, HDDs starts working like a crazy making a lot of noise, after 15 minutes HDDs stopped go crazy and OS booted at last. All seems to be ok - tank/iscsi2 was destroyed. After file systems at the tank was accessible, zpool status showed no corruption. I issued new command: zfs destroy tank/iscsi1 -r Situation was repeated - after some time my computer hang out. But this time ZFS seams not to healed itself. After computer switched on it started to work: loading scripts and kernel modules, after zfs starting to work it hanging my computer. I need to recover else ZFS file systems which lying in the same zpool. Few month ago I backup OS to flash drive. Booting from backed-up OS and import have the same results - OS starts hanging. How to recover my data at ZFS tank?

  Read the article

• Windows expand over 2 monitors in quad-monitor setup

  - by Martin

  i just installed ubuntu 11.10 with my previous hardware setup: 4 monitors and 2 identical nvidia graphic cards. draging windows around all 4 monitors works nice, but when i maximize a window it expand always over 2 screens. (2x twinview). i had an workaround for this in 11.04 but cant remember what it was... may one of you guys have quad monitors up and running with window maximizing on only one screen my xorg.conf looks like this: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@allspice) Thu Aug 11 20:54:45 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" 0 1080 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• Intel TurboBoost not working under 12.04 LTS

  - by Panák Tibor

  Please help me someone :) My notebook has Intel core i5 3337U CPU with Intel turbo boost. Under 12.04 the turbo boost is not working properly. It's frequency maximum is 1.8Ghz but the CPU can run 2.7GHz. How can I fix it? pano@dell-inspiron:~$ grep MHz /proc/cpuinfo cpu MHz : 774.000 cpu MHz : 1801.000 cpu MHz : 774.000 cpu MHz : 1801.000 pano@dell-inspiron:~$ grep MHz /proc/cpuinfo cpu MHz : 774.000 cpu MHz : 1801.000 cpu MHz : 774.000 cpu MHz : 1801.000 pano@dell-inspiron:~$ grep MHz /proc/cpuinfo cpu MHz : 774.000 cpu MHz : 1801.000 cpu MHz : 1800.000 cpu MHz : 1801.000 pano@dell-inspiron:~$ grep MHz /proc/cpuinfo cpu MHz : 774.000 cpu MHz : 1801.000 cpu MHz : 774.000 cpu MHz : 1700.000

  Read the article

• How to get the native version of Spotify running?

  - by Dante Ashton

  A while ago Spotify (the streaming music service) came out with a preview for Linux of their client. I had succesfully run it throughout 10.04. Now I'm on 10.10, I can't seem to find it in the package manager, let alone install it. Software Sources gives me this; Failed to fetch http://repository.spotify.com/dists/stable/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. So...as I'm paying for Spotify what...umm...do I do? :P

  Read the article

• no hdmi sound on Ubuntu 12.04 LTS

  - by bart

  i'm very new to ubuntu/linux. I installed Ubuntu 12.04 LTS on my vista laptop (nvidia gpu) in dual boot and with some help of google i'm almost ready to go. The only thing that i can't figure out is how to play sound trough my hdmi connected to my tv. Speakers of the laptop are ok, in te sound settings i can see -hdmi -digital -speaker outputs. The top 2 won't play sound so i googled around, found a bunch of things to try but the only thing succesfull so far was to erase all the drivers from the audio settings and they stayed gone. So finally i re-installed from scratch but still no sound trough hdmi. Re-installed 6times in the last 3 days now so the only thing left for me is reaching out for help/advice about this. How can i play sound on my tv connected with hdmi? I will be glad to give more info if needed cuz this is driving me crazy, thanks for your help in advance ! Bart.

  Read the article

• Ubuntu 13.10 gives "Package 'libapache2-mod-auth-mysql' has no installation candidate" error

  - by John Crawford

  I'm trying to install my LAMP environment on Ubuntu 13.10 using my script file that can be found here. That script worked for Ubuntu 12.04, Ubuntu 13.04 but when I try it on Ubuntu 13.10 it gives the following error: E: Package 'libapache2-mod-auth-mysql' has no installation candidate Any idea on how to fix this? Note, I do want this package to be installed. EDIT: I've found out now that the reason this could not be installed was because it needed the following two packages that were missing: libmysqlclient16 and apache2.2-common. Do I just need to install these packages or were they removed for a reason?

  Read the article

• error while loading shared libraries, file too short

  - by tommyk

  From one of my customers I got an application. When I try to run it I got following error error while loading shared libraries: ./libvtkWidgets.so.5.4: file too short In my project structure I see following: -rwxrwxrwx 1 tomasz tomasz 20 2011-02-01 10:44 libvtkWidgets.so -rwxrwxrwx 1 tomasz tomasz 22 2011-02-01 10:44 libvtkWidgets.so.5.4 -rwxrwxrwx 1 tomasz tomasz 2147103 2011-02-01 10:44 libvtkWidgets.so.5.4.2 Is my shared library libvtkWidgets corrupted ? How to solve that error ?

  Read the article

• Upgrade problem during Ubuntu 11.10

  - by pankaj singh

  During upgrading in last moment, show memory problem but I restart my laptop in hurry than it give that type of message what can i do? *starting automatic crash report generation [fail] PulseAudio configured for pre-user sessions saned disabled :edit/etc/default/saned *stopeing save kernel messages [ok] After than invoking init scripts through /etc/init.d, use the service(8) utility,eg. service S90binfmt-support start Since the scripts you are attempting to invoke has been converted to an Upstart pb, you may also use the start(8)utility, e.g start S90binfmt-support start:Unknown job:S90binfmt-support *Stopping anac(h)ronistic c[ok] *checking battery state.. [ok] * stopping System V runlevel compatibility [ok]

  Read the article

• Trouble compiling MonoDevelop 4 on Ubuntu 12.04

  - by Mehran

  I'm trying to compile the latest version of MonoDevelop (4.0.9) on my Ubuntu 12.04 and I'm facing errors I can not overcome. Here are my machine's configurations: OS: Ubuntu 12.04 64-bit Mono: version 3.0.12 And here are the commands that I ran to download MonoDevelop: $ git clone git://github.com/mono/monodevelop.git $ cd monodevelop $ git submodule init $ git submodule update And afterwards to compile: ./configure --prefix=`pkg-config --variable=prefix mono` --profile=stable make Then I faced the following errors (sorry if it's long): ... Building ./Main.sln xbuild /verbosity:quiet /nologo /property:CodePage=65001 ./Main.sln /property:Configuration=Debug /home/mehran/git/monodevelop/main/Main.sln: warning : Don't know how to handle GlobalSection MonoDevelopProperties.Debug, Ignoring. : warning CS1685: The predefined type `System.Runtime.CompilerServices.ExtensionAttribute' is defined in multiple assemblies. Using definition from `mscorlib' /usr/lib/mono/4.0/Microsoft.CSharp.targets: error : Compiler crashed with code: 1. : warning CS1685: The predefined type `System.Runtime.CompilerServices.ExtensionAttribute' is defined in multiple assemblies. Using definition from `mscorlib' Editor/IDocument.cs(98,30): warning CS0419: Ambiguous reference in cref attribute `GetOffset'. Assuming `ICSharpCode.NRefactory.Editor.IDocument.GetOffset(int, int)' but other overloads including `ICSharpCode.NRefactory.Editor.IDocument.GetOffset(ICSharpCode.NRefactory.TextLocation)' have also matched PatternMatching/INode.cs(51,37): warning CS1574: XML comment on `ICSharpCode.NRefactory.PatternMatching.PatternExtensions.Match(this ICSharpCode.NRefactory.PatternMatching.INode, ICSharpCode.NRefactory.PatternMatching.INode)' has cref attribute `PatternMatching.Match.Success' that could not be resolved TextLocation.cs(35,23): warning CS0419: Ambiguous reference in cref attribute `Editor.IDocument.GetOffset'. Assuming `ICSharpCode.NRefactory.Editor.IDocument.GetOffset(int, int)' but other overloads including `ICSharpCode.NRefactory.Editor.IDocument.GetOffset(ICSharpCode.NRefactory.TextLocation)' have also matched TypeSystem/FullTypeName.cs(87,24): warning CS0419: Ambiguous reference in cref attribute `ReflectionHelper.ParseReflectionName'. Assuming `ICSharpCode.NRefactory.TypeSystem.ReflectionHelper.ParseReflectionName(string)' but other overloads including `ICSharpCode.NRefactory.TypeSystem.ReflectionHelper.ParseReflectionName(string, ref int)' have also matched TypeSystem/INamedElement.cs(59,24): warning CS0419: Ambiguous reference in cref attribute `ReflectionHelper.ParseReflectionName'. Assuming `ICSharpCode.NRefactory.TypeSystem.ReflectionHelper.ParseReflectionName(string)' but other overloads including `ICSharpCode.NRefactory.TypeSystem.ReflectionHelper.ParseReflectionName(string, ref int)' have also matched TypeSystem/IType.cs(50,26): warning CS1584: XML comment on `ICSharpCode.NRefactory.TypeSystem.IType' has syntactically incorrect cref attribute `IEquatable{IType}.Equals(IType)' TypeSystem/IType.cs(319,38): warning CS1580: Invalid type for parameter `1' in XML comment cref attribute `GetMethods(Predicate{IUnresolvedMethod}, GetMemberOptions)' TypeSystem/TypeKind.cs(61,17): warning CS1580: Invalid type for parameter `1' in XML comment cref attribute `IType.GetNestedTypes(Predicate{ITypeDefinition}, GetMemberOptions)' TypeSystem/SpecialType.cs(50,52): warning CS1580: Invalid type for parameter `1' in XML comment cref attribute `IType.GetNestedTypes(Predicate{ITypeDefinition}, GetMemberOptions)' /usr/lib/mono/4.0/Microsoft.CSharp.targets: error : Compiler crashed with code: 1.

  Read the article

• JRE not working on firefox

  - by user1488595

  I am attempting to get JRE 7 run in firefox in ubuntu 12.04, 32 bit. I've tried to follow this article: www.liberiangeek.net/2012/04/install-oracle-java-runtime-jre-7-in-ubuntu-12-04-precise-pangolin/ . I've also tried this repository: www.webupd8.org/2012/06/how-to-install-oracle-java-7-in-debian.html As well as installing JDK, which contains JRE, by following this article: www.liberiangeek.net/2012/04/install-oracle-java-jdk-7-in-ubuntu-12-04-precise-pangolin/ With all above method of installation, I get the following error in firefox console when I run applet with firefox: java.io.IOException: Cannot run program "/usr/lib/jvm/jre1.7.0/bin/java": error=13, Permission denied at java.lang.ProcessBuilder.start(Unknown Source) at sun.plugin2.jvm.JVMLauncher.start(Unknown Source) at sun.plugin2.main.server.JVMInstance.startImpl(Unknown Source) at sun.plugin2.main.server.JVMInstance.start(Unknown Source) at sun.plugin2.main.server.JVMManager.getOrCreateBestJVMInstance(Unknown Source) at sun.plugin2.main.server.JVMManager.startAppletImpl(Unknown Source) at sun.plugin2.main.server.JVMManager.startApplet(Unknown Source) at sun.plugin2.main.server.JVMManager.startApplet(Unknown Source) at sun.plugin2.main.server.MozillaPlugin.maybeStartApplet(Unknown Source) at sun.plugin2.main.server.MozillaPlugin.setWindow(Unknown Source) Caused by: java.io.IOException: error=13, Permission denied at java.lang.UNIXProcess.forkAndExec(Native Method) at java.lang.UNIXProcess.(Unknown Source) at java.lang.ProcessImpl.start(Unknown Source) ... 10 more java.io.IOException at sun.plugin2.main.server.JVMInstance.startImpl(Unknown Source) at sun.plugin2.main.server.JVMInstance.start(Unknown Source) at sun.plugin2.main.server.JVMManager.getOrCreateBestJVMInstance(Unknown Source) at sun.plugin2.main.server.JVMManager.startAppletImpl(Unknown Source) at sun.plugin2.main.server.JVMManager.startApplet(Unknown Source) at sun.plugin2.main.server.JVMManager.startApplet(Unknown Source) at sun.plugin2.main.server.MozillaPlugin.maybeStartApplet(Unknown Source) at sun.plugin2.main.server.MozillaPlugin.setWindow(Unknown Source) Caused by: java.io.IOException: Cannot run program "/usr/lib/jvm/jre1.7.0/bin/java": error=13, Permission denied at java.lang.ProcessBuilder.start(Unknown Source) at sun.plugin2.jvm.JVMLauncher.start(Unknown Source) ... 8 more Caused by: java.io.IOException: error=13, Permission denied at java.lang.UNIXProcess.forkAndExec(Native Method) at java.lang.UNIXProcess.(Unknown Source) at java.lang.ProcessImpl.start(Unknown Source) ... 10 more Exception in thread "main" java.lang.RuntimeException: java.io.IOException at sun.plugin2.main.server.JVMManager.getOrCreateBestJVMInstance(Unknown Source) at sun.plugin2.main.server.JVMManager.startAppletImpl(Unknown Source) at sun.plugin2.main.server.JVMManager.startApplet(Unknown Source) at sun.plugin2.main.server.JVMManager.startApplet(Unknown Source) at sun.plugin2.main.server.MozillaPlugin.maybeStartApplet(Unknown Source) at sun.plugin2.main.server.MozillaPlugin.setWindow(Unknown Source) Caused by: java.io.IOException at sun.plugin2.main.server.JVMInstance.startImpl(Unknown Source) at sun.plugin2.main.server.JVMInstance.start(Unknown Source) ... 6 more Caused by: java.io.IOException: Cannot run program "/usr/lib/jvm/jre1.7.0/bin/java": error=13, Permission denied at java.lang.ProcessBuilder.start(Unknown Source) at sun.plugin2.jvm.JVMLauncher.start(Unknown Source) ... 8 more Caused by: java.io.IOException: error=13, Permission denied at java.lang.UNIXProcess.forkAndExec(Native Method) at java.lang.UNIXProcess.(Unknown Source) at java.lang.ProcessImpl.start(Unknown Source) ... 10 more I've tried to type: sudo chmod 777 /usr/lib/jvm/jre1.7.0/bin/java It did not work. I also tried to run Eclipse, which requires JRE to run. It did not work originally(it works now), returning the following error: java.lang.UnsatisfiedLinkError: Could not load SWT library. Reasons: no swt-gtk-3740 in java.library.path no swt-gtk in java.library.path Can't load library: /home/username/.swt/lib/linux/x86/libswt-gtk-3740.so Can't load library: /home/usename/.swt/lib/linux/x86/libswt-gtk.so at org.eclipse.swt.internal.Library.loadLibrary(Library.java:285) By running "ln -s /usr/lib/jni/libswt-* ~/.swt/lib/linux/x86/" (Thanks, stackoverflow.com/questions/10970754/cant-open-eclipse-in-ubuntu-12-04-java-lang-unsatisfiedlinkerror-could-not-l), Eclipse works again. I have been googling this for days, without luck. Any response would be appreciated.

  Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >