Search Results

Search found 43978 results on 1760 pages for 'select case'.

Page 1600/1760 | < Previous Page | 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607  | Next Page >

• Exadata X3, 11.2.3.2 and Oracle Platinum Services

  - by Rene Kundersma

  Oracle recently announced an Exadata Hardware Update. The overall architecture will remain the same, however some interesting hardware refreshes are done especially for the storage server (X3-2L). Each cell will now have 1600GB of flash, this means an X3-2 full rack will have 20.3 TB of total flash ! For all the details I would like to refer to the Oracle Exadata product page: www.oracle.com/exadata Together with the announcement of the X3 generation. A new Exadata release, 11.2.3.2 is made available. New Exadata systems will be shipped with this release and existing installations can be updated to that release. As always there is a storage cell patch and a patch for the compute node, which again needs to be applied using YUM. Instructions and requirements for patching existing Exadata compute nodes to 11.2.3.2 using YUM can be found in the patch README. Depending on the release you have installed on your compute nodes the README will direct you to a particular section in MOS note 1473002.1. MOS 1473002.1 should only be followed with the instructions from the 11.2.3.2 patch README. Like with 11.2.3.1.0 and 11.2.3.1.1 instructions are added to prepare your systems to use YUM for the first time in case you are still on release 11.2.2.4.2 and earlier. You will also find these One Time Setup instructions in MOS note 1473002.1 By default compute nodes that will be updated to 11.2.3.2.0 will have the UEK kernel. Before 11.2.3.2.0 the 'compatible kernel' was used for the compute nodes. For 11.2.3.2.0 customer will have the choice to replace the UEK kernel with the Exadata standard 'compatible kernel' which is also in the ULN 11.2.3.2 channel. Recommended is to use the kernel that is installed by default. One of the other great new things 11.2.3.2 brings is Writeback Flashcache (wbfc). By default wbfc is disabled after the upgrade to 11.2.3.2. Enable wbfc after patching on the storage servers of your test environment and see the improvements this brings for your applications. Writeback FlashCache can be enabled  by dropping the existing FlashCache, stopping the cellsrv process and changing the FlashCacheMode attribute of the cell. Of course stopping cellsrv can only be done in a controlled manner. Steps: drop flashcache alter cell shutdown services cellsrv again, cellsrv can only be stopped in a controlled manner alter cell flashCacheMode = WriteBack alter cell startup services cellsrv create flashcache all Going back to WriteThrough FlashCache is also possible, but only after flushing the FlashCache: alter cell flashcache all flush Last item I like to highlight in particular is already from a while ago, but a great thing to emphasis: Oracle Platinum Services. On top of the remote fault monitoring with faster response times Oracle has included update and patch deployment services.These services are delivered by Oracle Advanced Customer Support at no additional costs for qualified Oracle Premier Support customers. References: 11.2.3.2.0 README Exadata YUM Repository Population, One-Time Setup Configuration and YUM upgrades  1473002.1 Oracle Platinum Services

  Read the article

• Hyper-V Live Migration across Sites!

  - by Ryan Roussel

  One of the great sessions I sat in on at Tech Ed this week was stretching a Windows 2008 R2 Hyper-V  Failover Cluster across sites.  With this ability, you could actually implement a Hyper-V cluster where you could migrate or even Live Migrate VMs across sites.   With this area’s propensity for Hurricanes, this will be a very popular topic for me over the next few months. While this technology is possible today, it’s also very complicated and can be very expensive to implement.    First your WAN connection has to support the ability to trunk your VLAN across both sites in order to Live Migrate.  This means you can’t use a Layer 3 routed connection like MPLS.  It has to be a Metro Ethernet connection or "Dark Fiber”.  Dark Fiber is unused Fiber already in the ground that can be leased from  various providers. Both of these connections would allow you to trunk layer 2 across your WAN.  Cisco does have the ability to trunk layer 2 across a routed connection by muxing the traffic but this is only available in their Nexus product line which has a very steep price tag.   If you are stuck with MPLS or the like and Nexus switching is not a realistic possibility, you will have to implement a multi-subnet cluster in which case Live Migration won’t be possible.  However you can still failover VMs to the remote site with some planning and manual intervention.  The consideration here is that the VMs will be on a different subnet once migrated, so you will have to change the IP addressing of your VMs.  This also has ramifications with DNS and Name resolution to control your down time.  DHCP with Reservations for your VMs is the preferred method to achieve the IP changes as this will automate that part of the process.   Secondly, you will have to have  a mechanism to replicate your storage across both sites.  Many SAN vendors natively support hardware based synchronous and asynchronous replication.  Some even support cluster shared volumes which were introduced in 2008 R2.   If your SANs do not support this natively, there are alternative file based replication products either software based like Double Take or hardware appliance like EMC.  Be sure to check with your vendor on the support of Disk majority if you’re replicating your quorum disk between SANs.   The last consideration is the ability to maintain quorum for your cluster.  If your replication provider does not support Disk Majority through replication, you will have to explore Node Majority with File Share Witness.  This will affect your design as a 3 node cluster with 1 node at the remote site and FSW at the production site would not have the ability to maintain quorum if the production site was lost. MS best practice for this would be to implement an even node cluster with 2 nodes at  each site and the FSW at a third site.   And there you have it.  While some considerations and research goes into implementing this solution, even a multi-subnet solution would be invaluable to organizations in the implementations of “warm” DR sites.

  Read the article

• How to translate along Z axis in OpenTK

  - by JeremyJAlpha

  I am playing around with an OpenGL sample application I downloaded for Xamarin-Android. The sample application produces a rotating colored cube I would simply like to edit it so that the rotating cube is translated along the Z axis and disappears into the distance. I modified the code by: adding an cumulative variable to store my Z distance, adding GL.Enable(All.DepthBufferBit) - unsure if I put it in the right place, adding GL.Translate(0.0f, 0.0f, Depth) - before the rotate functions, Result: cube rotates a couple of times then disappears, it seems to be getting clipped out of the frustum. So my question is what is the correct way to use and initialize the Z buffer and get the cube to travel along the Z axis? I am sure I am missing some function calls but am unsure of what they are and where to put them. I apologise in advance as this is very basic stuff but am still learning :P, I would appreciate it if anyone could show me the best way to get the cube to still rotate but to also move along the Z axis. I have commented all my modifications in the code: // This gets called when the drawing surface is ready protected override void OnLoad (EventArgs e) { // this call is optional, and meant to raise delegates // in case any are registered base.OnLoad (e); // UpdateFrame and RenderFrame are called // by the render loop. This is takes effect // when we use 'Run ()', like below UpdateFrame += delegate (object sender, FrameEventArgs args) { // Rotate at a constant speed for (int i = 0; i < 3; i ++) rot [i] += (float) (rateOfRotationPS [i] * args.Time); }; RenderFrame += delegate { RenderCube (); }; GL.Enable(All.DepthBufferBit); //Added by Noob GL.Enable(All.CullFace); GL.ShadeModel(All.Smooth); GL.Hint(All.PerspectiveCorrectionHint, All.Nicest); // Run the render loop Run (30); } void RenderCube () { GL.Viewport(0, 0, viewportWidth, viewportHeight); GL.MatrixMode (All.Projection); GL.LoadIdentity (); if ( viewportWidth > viewportHeight ) { GL.Ortho(-1.5f, 1.5f, 1.0f, -1.0f, -1.0f, 1.0f); } else { GL.Ortho(-1.0f, 1.0f, -1.5f, 1.5f, -1.0f, 1.0f); } GL.MatrixMode (All.Modelview); GL.LoadIdentity (); Depth -= 0.02f; //Added by Noob GL.Translate(0.0f,0.0f,Depth); //Added by Noob GL.Rotate (rot[0], 1.0f, 0.0f, 0.0f); GL.Rotate (rot[1], 0.0f, 1.0f, 0.0f); GL.Rotate (rot[2], 0.0f, 1.0f, 0.0f); GL.ClearColor (0, 0, 0, 1.0f); GL.Clear (ClearBufferMask.ColorBufferBit); GL.VertexPointer(3, All.Float, 0, cube); GL.EnableClientState (All.VertexArray); GL.ColorPointer (4, All.Float, 0, cubeColors); GL.EnableClientState (All.ColorArray); GL.DrawElements(All.Triangles, 36, All.UnsignedByte, triangles); SwapBuffers (); }

  Read the article

• jtreg update, December 2012

  - by jjg

  There is a new version of jtreg available. The primary new feature is support for tests that have been written for use with TestNG, the popular open source testing framework. TestNG is supported by a variety of tools and plugins, which means that it is now possible to develop tests for OpenJDK using those tools, while still retaining the ability to have the tests be part of the OpenJDK test suite, and run with a single test harness, jtreg. jtreg can be downloaded from the OpenJDK jtreg page: http://openjdk.java.net/jtreg. TestNG support jtreg supports both single TestNG tests, which can be freely intermixed with other types of jtreg tests, and groups of TestNG tests. A single TestNG test class can be compiled and run by providing a test description using the new action tag: @run testng classname The test will be executed by using org.testng.TestNG. No main method is required. A group of TestNG tests organized in a standard package hierarchy can also be compiled and run by jtreg. Any such group must be identified by specifying the root directory of the package hierarchy. You can either do this in the top level TEST.ROOT file, or in a TEST.properties file in any subdirectory enclosing the group of tests. In either case, add a line to the file of the form: TestNG.dirs = dir ... Directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. In particular, note that you can simply use "TestNG.dirs = ." in a TEST.properties file in the root directory of the test group's package hierarchy. No additional test descriptions are necessary, but test descriptions containing information tags, such as @bug, @summary, etc are permitted. All the Java source files in the group will be compiled if necessary, before any of the tests in the group are run. The selected tests within the group will be run, one at a time, using org.testng.TestNG. Library classes The specification for the @library tag has been extended so that any paths beginning with '/' will be evaluated relative to the root directory of the test suite. In addition, some bugs have been fixed that prevented sharing the compiled versions of library classes between tests in different directories. Note: This has uncovered some issues in tests that use a combination of @build and @library tags, such that some tests may fail unexpectedly with ClassNotFoundException. The workaround for now is to ensure that library classes are listed before the test classes in any @build tags. To specify one or more library directories for a group of TestNG tests, add a line of the following form to the TEST.properties file in the root directory of the group's package hierarchy: lib.dirs = dir ... As before, directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. The libraries will be available to all classes in the group; you cannot specify different libraries for different tests within the group. Coming soon ... From this point on, jtreg development will be using the new jtreg repository in the OpenJDK code-tools project. There is a new email alias jtreg-dev at openjdk.java.net for discussions about jtreg development. The existing alias jtreg-use at openjdk.java.net will continue to be available for questions about using jtreg. For more information ... An updated version of the jtreg Tag Language Specification is being prepared, and will be made available when it is ready. In the meantime, you can find more information about the support for TestNG by executing the following command: $ jtreg -onlinehelp TestNG For more information on TestNG itself, visit testng.org.

  Read the article

• PowerShell: Read Excel to Create Inserts

  - by BuckWoody

  I’m writing a series of articles on how to migrate “departmental” data into SQL Server. I also hold workshops on the entire process – from discovering that the data exists to the modeling process and then how to design the Extract, Transform and Load (ETL) process. Finally I write about (and teach) a few methods on actually moving the data. One of those options is to use PowerShell. There are a lot of ways even with that choice, but the one I show is to read two columns from the spreadsheet and output statements that would insert the data using a stored procedure. Of course, you could re-write this as INSERT statements, out to a text file for bcp, or even use a database connection in the script to move the data directly from Excel into SQL Server. This snippet won’t run on your system, of course – it assumes a Microsoft Office Excel 2007 spreadsheet located at c:\temp called VendorList.xlsx. It looks for a tab in that spreadsheet called Vendors. The statement that does the writing just uses one column: Vendor Code. Here’s the breakdown of what I’m doing: In the first block, I connect to Microsoft Office Excel. That connection string is specific to Excel 2007, so if you need a different version you’ll need to look that up. In the second block I set up a selection from the entire spreadsheet based on that tab. Note that if you’re only after certain data you shouldn’t get the whole spreadsheet – that’s just good practice. In the next block I create the text I want, inserting the Vendor Code field as I go. Finally I close the connection. Enjoy! $ExcelConnection= New-Object -com "ADODB.Connection" $ExcelFile="c:\temp\VendorList.xlsx" $ExcelConnection.Open("Provider=Microsoft.ACE.OLEDB.12.0;` Data Source=$ExcelFile;Extended Properties=Excel 12.0;") $strQuery="Select * from [Vendors$]" $ExcelRecordSet=$ExcelConnection.Execute($strQuery) do { Write-Host "EXEC sp_InsertVendors '" $ExcelRecordSet.Fields.Item("Vendor Code").Value "'" $ExcelRecordSet.MoveNext()} Until ($ExcelRecordSet.EOF) $ExcelConnection.Close() Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Organization &amp; Architecture UNISA Studies &ndash; Chap 6

  - by MarkPearl

  Learning Outcomes Discuss the physical characteristics of magnetic disks Describe how data is organized and accessed on a magnetic disk Discuss the parameters that play a role in the performance of magnetic disks Describe different optical memory devices Magnetic Disk The way data is stored on and retried from magnetic disks Data is recorded on and later retrieved form the disk via a conducting coil named the head (in many systems there are two heads) The writ mechanism exploits the fact that electricity flowing through a coil produces a magnetic field. Electric pulses are sent to the write head, and the resulting magnetic patterns are recorded on the surface below with different patterns for positive and negative currents The physical characteristics of a magnetic disk   Summarize from book   The factors that play a role in the performance of a disk Seek time – the time it takes to position the head at the track Rotational delay / latency – the time it takes for the beginning of the sector to reach the head Access time – the sum of the seek time and rotational delay Transfer time – the time it takes to transfer data RAID The rate of improvement in secondary storage performance has been considerably less than the rate for processors and main memory. Thus secondary storage has become a bit of a bottleneck. RAID works on the concept that if one disk can be pushed so far, additional gains in performance are to be had by using multiple parallel components. Points to note about RAID… RAID is a set of physical disk drives viewed by the operating system as a single logical drive Data is distributed across the physical drives of an array in a scheme known as striping Redundant disk capacity is used to store parity information, which guarantees data recoverability in case of a disk failure (not supported by RAID 0 or RAID 1) Interesting to note that the increase in the number of drives, increases the probability of failure. To compensate for this decreased reliability RAID makes use of stored parity information that enables the recovery of data lost due to a disk failure.   The RAID scheme consists of 7 levels…   Category Level Description Disks Required Data Availability Large I/O Data Transfer Capacity Small I/O Request Rate Striping 0 Non Redundant N Lower than single disk Very high Very high for both read and write Mirroring 1 Mirrored 2N Higher than RAID 2 – 5 but lower than RAID 6 Higher than single disk Up to twice that of a signle disk for read Parallel Access 2 Redundant via Hamming Code N + m Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Parallel Access 3 Bit interleaved parity N + 1 Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Independent Access 4 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, significantly lower than single disk for write Similar to RAID 0 for read, significantly lower than single disk for write Independent Access 5 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, lower than single disk for write Similar to RAID 0 for read, generally  lower than single disk for write Independent Access 6 Block interleaved parity N + 2 Highest of all listed alternatives Similar to RAID 0 for read; lower than RAID 5 for write Similar to RAID 0 for read, significantly lower than RAID 5  for write   Read page 215 – 221 for detailed explanation on RAID levels Optical Memory There are a variety of optical-disk systems available. Read through the table on page 222 – 223 Some of the devices include… CD CD-ROM CD-R CD-RW DVD DVD-R DVD-RW Blue-Ray DVD Magnetic Tape Most modern systems use serial recording – data is lade out as a sequence of bits along each track. The typical recording used in serial is referred to as serpentine recording. In this technique when data is being recorded, the first set of bits is recorded along the whole length of the tape. When the end of the tape is reached the heads are repostioned to record a new track, and the tape is again recorded on its whole length, this time in the opposite direction. That process continued back and forth until the tape is full. To increase speed, the read-write head is capable of reading and writing a number of adjacent tracks simultaneously. Data is still recorded serially along individual tracks, but blocks in sequence are stored on adjacent tracks as suggested. A tape drive is a sequential access device. Magnetic tape was the first kind of secondary memory. It is still widely used as the lowest-cost, slowest speed member of the memory hierarchy.

  Read the article

• Doubts about several best practices for rest api + service layer

  - by TheBeefMightBeTough

  I'm going to be starting a project soon that exposes a restful api for business intelligence. It may not be limited to a restful api, so I plan to delegate requests to a service layer that then coordinates multiple domain objects (each of which have business logic local to the object). The api will likely have many calls as it is a long-term project. While thinking about the design, I recalled a few best practices. 1) Use command objects at the controller layer (I'm using Spring MVC). 2) Use DTOs at the service layer. 3) Validate in both the controller and service layer, though for different reasons. I have my doubts about these recommendations. 1) Using command objects adds a lot of extra single-purpose classes (potentially one per request). What exactly is the benefit? Annotation based validation can be done using this approach, sure. What if I have two requests that take the same parameters, but have different validation requirements? I would have to have two different classes with exactly the same members but different annotations? Bleh. 2) I have heard that using DTOs is preferable to parameters because it makes for more maintainable code down the road (say, e.g., requirements change and the service parameters need to be altered). I don't quite understand this. Shouldn't an api be more-or-less set in stone? I would understand that in the early phases of a project (or, especially, an entire company) the domain itself will not be well understood, and thus core domain objects may change along with the apis that manipulate these objects. At this point however the number of api methods should be small and their dependents few, so changes to the methods could easily be tolerated from a maintainability standpoint. In a large api with many methods and a substantial domain model, I would think having a DTO for potentially each domain object would become unwieldy. Am I misunderstanding something here? 3) I see validation in the controller and service layer as redundant in most cases. Why would I validate that parameters are not null and are in general well formed in the controller if the service is going to do exactly the same (and more). Couldn't I just do all the validation in the service and throw a runtime exception with a list of bad parameters then catch that in the controller to make the error messages more presentable? Better yet, couldn't I just make the error messages user-friendly in the service and let the exception trickle up to a global handler (ControllerAdvice in spring, for example)? Is there something wrong with either of these approaches? (I do see a use case for controller validation if the input does not map one-to-one with the service input, but since the controllers are for a rest api and not forms, the api parameters will probably map directly to service parameters.) I do also have a question about unchecked vs checked exceptions. Namely, I'm not really sure why I'd ever want to use a checked exception. Every time I have seen them used they just get wrapped into general exceptions (DomainException, SystemException, ApplicationException, w/e) to reduce the signature length of methods, or devs catch Exception rather than dealing with the App1Exception, App2Exception, Sys1Exception, Sys2Exception. I don't see how either of these practices is very useful. Why not just use unchecked exceptions always and catch the ones you actually do care about? You could just document what unchecked exceptions the method throws.

  Read the article

• SQL SERVER – How to Get SQL Server Restart Notification?

  - by Pinal Dave

  Few days back my friend called me to know if there is any tool which can be used to get restart notification about SQL in their environment. I told that SQL Server can do it by itself with some configurations. He was happy and surprised to know that he need not spend any extra money. In SQL Server, we can configure stored procedure(s) to run at start-up of SQL Server. This blog would give steps to achieve how to achieve it. There are many situations where this feature can be used. Below are few. Logging SQL Server startup timings Modify data in some table during startup (i.e. table in tempdb) Sending notification about SQL start. Step 1 – Enable ‘scan for startup procs’ This can be done either using T-SQL or User Interface of Management Studio. EXEC sys.sp_configure N'Show Advanced Options', N'1' GO RECONFIGURE WITH OVERRIDE GO EXEC sys.sp_configure N'scan for startup procs', N'1' GO RECONFIGURE WITH OVERRIDE GO Below is the interface to change the setting. We need to go to “Server” > “Properties” and use “Advanced” tab. “Scan for Startup Procs” is the parameter under “Miscellaneous” section as shown below. We need to make value as “True” and hit OK. Step 2 – Create stored procedure It’s important to note that the procedure is executed after recovery is finished for ALL databases. Here is a sample stored procedure. You can use your own logic in the procedure. CREATE PROCEDURE SQLStartupProc AS BEGIN CREATE TABLE ##ThisTableShouldAlwaysExists (AnyColumn INT) END Step 3 – Set Procedure to run at startup We need to use sp_procoption to mark the procedure to run at startup. Here is the code to let SQL know that this is startup proc. sp_procoption 'SQLStartupProc', 'startup', 'true' This can be used only for procedures in master database. Msg 15398, Level 11, State 1, Procedure sp_procoption, Line 89 Only objects in the master database owned by dbo can have the startup setting changed. We also need to remember that such procedure should not have any input/output parameter. Here is the error which would be raised. Msg 15399, Level 11, State 1, Procedure sp_procoption, Line 107 Could not change startup option because this option is restricted to objects that have no parameters. Verification Here is the query to find which procedures is marked as startup procedures. SELECT name FROM sys.objects WHERE OBJECTPROPERTY(OBJECT_ID, 'ExecIsStartup') = 1 Once this is done, I have restarted SQL instance and here is what we would see in SQL ERRORLOG Launched startup procedure 'SQLStartupProc'. This confirms that stored procedure is executed. You can also notice that this is done after all databases are recovered. Recovery is complete. This is an informational message only. No user action is required. After few days my friend again called me and asked – I want to turn this OFF? Use comments section and post the answer for him.  Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL

  Read the article

• How to Convert Videos to 3GP for Mobile Phones

  - by DigitalGeekery

  Would you like to play videos on your phone, but the device only supports 3GP files? We’ll show you how to convert popular video files into 3GP mobile phone video format with Pazera Free Video to 3GP Converter. Download the Pazera Free Video to 3GP Converter (Download link below). It will allow you to convert popular video files (AVI, MPEG, MP4, FLV, MKV, and MOV) to work on your mobile phone. There is no installation to run. You’ll just need to unzip the download folder and double-click the videoto3gp.exe file to run the application. To add video files to the queue, click on the Add files button. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time. The converter comes with several pre-configured profiles for conversion settings. To load a profile, select one from the Profile drop down list and then click the Load button. The settings in the panels at the bottom of the application will be automatically updated.   If you are a more advanced user, the options on the lower panels allow for adjusting settings to your liking. You can choose between 3GP and 3G2 (for some older phones), H.263, MPEG-4, and XviD video codecs, AAC or AMR-NB audio codecs, as well as a variety of bitrates, resolutions, etc.  By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. Click Convert to start the conversion process. A conversion output box will open and display the progress. When finished, click Close.   Now you’re ready to load the video onto your phone and enjoy.     Conclusion Pazera Free Video to 3GP Converter is not exactly the ultimate video conversion tool, but it is quick and simple enough for the average user to convert most video formats to 3GP. Plus, it’s portable. You can copy the folder to a USB drive and take it with you. Do you have some 3GP video files you’d like to convert to more common formats? Check out our earlier article on how to convert 3GP to AVI and MPEG for free. Link Download Pazera Free Video to 3GP Converter Similar Articles Productive Geek Tips Convert .3GP and .3G2 Files to AVI / MPEG for FreeExtract Audio from a Video File with Pazera Free Audio ExtractorConvert PDF Files to Word Documents and Other FormatsConvert YouTube Videos to MP3 with YouTube DownloaderFriday Fun: Watch HD Video Content with Meevid TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

  Read the article

• ArchBeat Link-o-Rama for 2012-06-29

  - by Bob Rhubart

  Backward-compatible vs. forward-compatible: a tale of two clouds | William Vambenepe "There is the Cloud that provides value by requiring as few changes as possible. And there is the Cloud that provides value by raising the abstraction and operation level," says William Vambenepe. "The backward-compatible Cloud versus the forward-compatible Cloud." Vambenepe was a panelist on the recent ArchBeat podcast Public, Private, and Hybrid Clouds. Andrejus Baranovskis's Blog: ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) Oracle ACE Director Andrejus Baranovskis investigates "how you can customize a standard BPM Task Flow through MDS Seeded customization." Oracle OpenWorld 2012 Music Festival If, after a day spent in sessions at Oracle Openworld, you want nothing more than to head back to your hotel for a quiet evening spent responding to email, please ignore the rest of this message. Because every night from Sept 30 to Oct 4 the streets of San Francisco will pulsate with music from a vast array of bands representing more musical styles than a single human brain an comprehend. It's the first ever Oracle Music Festival, baby, 7:00pm to 1:00am every night. Are those emails that important...? Resource Kit: Oracle Exadata - includes demos, videos, product datasheets, and technical white papers. This free resource kit includes several customer case study videos, two 3D product demos, several product datasheets, and three technical architecture white papers. Registration is required for the who don't already have a free Oracle.com membership account. Some execs contemplate making 'Bring Your Own Device' mandatory | ZDNet "Companies and agencies are recognizing that individual employees are doing a better job of handling and managing their devices than their harried and overworked IT departments – who need to focus on bigger priorities, such as analytics and cloud," says ZDNet SOA blogger Joe McKendrick. Podcast Show Notes: Public, Private, and Hybrid Clouds All three parts of this discussion are now available. Featuring a panel of leading Oracle cloud computing experts, including Dr. James Baty, Mark T. Nelson, Ajay Srivastava, and William Vambenepe, the discussion covers an overview of the various flavors of cloud computing, the importance of standards, Why cloud computing is a paradigm shift—and why it isn't, and advice on what architects need to know to take advantage of the cloud. And for those who prefer reading to listening, a complete transcript is also available. Amazon AMIs and Oracle VM templates (Cloud Migrations) Cloud migration expert Tom Laszewski shares an objective comparison of these two resources. IOUC : Blogs : Read the latest news on the global user group community - June 2012! The June 2012 edition of "Are You a Member Yet?"—the quarterly newsletter about Oracle user group communities around the world. Webcast: Introducing Identity Management 11g R2 - July 19 Date: Thursday, July 19, 2012 Time: 10am PT / 1pm ET Please join Oracle and customer executives for the launch of Oracle Identity Management 11g R2, the breakthrough technology that dramatically expands the reach of identity management to cloud and mobile environments. Thought for the Day "The most important single aspect of software development is to be clear about what you are trying to build." — Bjarne Stroustrup Source: SoftwareQuotes.com

  Read the article

• "previousMode": Controling the Pin Action of a TopComponent

  - by Geertjan

  An excellent thing I learned today is that you, as a developer of a NetBeans module or NetBeans Platform application, can control the pin button. Up until today, whenever I had a TopComponent defined to appear in "rightSlidingSide" mode and then I clicked the "pin" button, as shown here... ...the TopComponent would then find itself pinned in the "explorer" mode. Would make more sense if it would be pinned in the "properties" mode, which is the docked mode closest to the "rightSlidingSide" mode. Not being able to control the "pin" button has been a recurring question (including in my own head) over several years. But the NetBeans Team's window system guru Stan Aubrecht informed me today that a "previousMode" attribute exists in the "tc-ref" file of the TopComponent. Since a few releases, that file is generated via the annotations in the TopComponent. However, "previousMode" is currently not one of the attributes exposed by the @TopComponent.Registration annotation. Therefore, what I did was this: Set "rightSlidingSide" in the "mode" attribute of the @TopComponent.Registration. Build the module. Find the "generated-layer.xml" (in the Files window) and move the layer registration of the TopComponent, including its action and menu item for opening the TopComponent, into my own manual layer within the module. Then remove all the TopComponent annotations from the TopComponent, though you can keep @ConvertAsProperties and @Messages. Then add the "previousMode" attribute, as highlighted below, into my own layer file, i.e., within the tags copied from the "generated-layer.xml": <folder name="Modes"> <folder name="rightSlidingSide"> <file name="ComparatorTopComponent.wstcref"> <![CDATA[<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE tc-ref PUBLIC "-//NetBeans//DTD Top Component in Mode Properties 2.0//EN" "http://www.netbeans.org/dtds/tc-ref2_0.dtd"> <tc-ref version="2.0"> <tc-id id="ComparatorTopComponent"/> <state opened="false"/> <previousMode name="properties" index="0" /> </tc-ref> ]]> </file> </folder> </folder> Now when you run the application and pin the specific TopComponent defined above, i.e., in the above case, named "ComparatorTopComponent", you will find it is pinned into the "properties" mode! That's pretty cool and if you agree, then you're a pretty cool NetBeans Platform developer, and I'd love to find out more about the application/s you're creating on the NetBeans Platform! Meanwhile, I'm going to create an issue for exposing the "previousMode" attribute in the @TopComponent.Registration annotation.

  Read the article

• UPOS RFIDScanner data format

  - by Robert Snyder

  A lot of work that I do currently is based in the OPOS/UPOS world. My company has a device that can read 13.56Mhz tags (RFID), Smart Cards, and Mag Stripe cards. Up until somewhat recently I have only been working with RFID for a very specific scenario. That was to read UltraLight C and Desfire cards. These cards were all setup very specifically so that I could take the data read from those cards and force it into a MSR track2 format. The past couple of weeks, however, I have been working on reading RFID credit cards (since I have a Visa card I've been using mine), and Smart Card credit cards. (The visa card I have has both) In learning how to communicate with SmartCard and reading ISO7816 and EMVCO documents I became a little more familiar with how info is stored. But now I have a question regarding UPOS. The RFID data on my Visa is stored (and read) very similar to how the data is stored and read from the Smart Card on my Visa. Cool. Well in the UPOS spec for SmartCardRW the ReadData method returns a byte array. That's cool, I can just return all that data and then parse it as my heart desires. The RFID though has a LinkedList of Tags. Well this makes sense in terms of my Visa card (reminds me of a question I have in regards to SmartCard, but that is for another question) but what about ULC and Desfire, or for that matter any Mifare card. Pages, Files, Purses don't exactly fit the Tag profile. For instance lets just say I read pages 4-12 on my ULC card. Each page I read is 4 bytes long. Does this mean I have 9 tags in my LinkedList? Is my Tag id the page number? Or then how does that translate to Desfire? I open application 123456 and read file 1 and file 2, Do I have 2 tags? and if so what is my tag id? At least with my Visa I think that I have to use the Tag id (ex 5F24 for my expiration date) and value of {0x15, 0x10, 0x31} Part of me says yes..that makes sense. Another part of me says, "well if that is the case then why doesn't SmartCardRW have Tags?" So that is my question. How do I format my data from those different types of media? or is that the job of my Control Object (the application)? Is so how does it know? The only protocols I have are: // Summary: // Enumerates the available predefined RFID tag protocols the device supports. [Flags] public enum RFIDProtocols { EpcClass0 = 1, RFIDSdt0Plus = 2, EpcClass1 = 4, EpcClass1Gen2 = 8, EpcClass2 = 16, Iso14443A = 4096, Iso14443B = 8192, Iso15693 = 12288, Iso180006B = 16384, Other = 16777216, All = 1073741824, } If I use that well all of my cards that I have are all Iso14443A. I use the ATQA and the SAK to know what type of card I really have. There is no RFID property that lets me specify that. So I'm lost.

  Read the article

• Package Version Numbers, why are they so important

  - by Chris W Beal

  One of the design goals of IPS has been to allow people to easily move forward to a supported "Surface" of component. That is to say, when you  # pkg update your system, you get the latest set of components which all work together, based on the packages you already have installed. During development, this has meant simply you update to the latest "build" of the components. (During development, we build everything and publish everything every two weeks). Now we've released Solaris 11 using the IPS technologies, things are a bit more complicated. We need to be able to reflect all the types of Solaris release we are doing. For example Solaris Development builds, Solaris Update builds and "Support Repository Updates" (the replacement for patches) in the version scheme. So simply saying "151" as the build number isn't sufficient to articulate what you are running, or indeed what is available to update to In my previous blog post I talked about creating your own package, and gave an example FMRI of pkg://tools/[email protected],0.5.11-0.0.0 But it's probably more instructive to look at the FMRI of a Solaris package. The package "core-os" contains all the common utilities and daemons you need to use Solaris.  $ pkg info core-os Name: system/core-os Summary: Core Solaris Description: Operating system core utilities, daemons, and configuration files. Category: System/Core State: Installed Publisher: solaris Version: 0.5.11 Build Release: 5.11 Branch: 0.175.0.0.0.2.1 Packaging Date: Wed Oct 19 07:04:57 2011 Size: 25.14 MB FMRI: pkg://solaris/system/[email protected],5.11-0.175.0.0.0.2.1:20111019T070457Z The FMRI is what we will concentrate on here. In this package "solaris" is the publisher. You can use the pkg publisher command to see where the solaris publisher gets it's bits from $ pkg publisher PUBLISHER TYPE STATUS URI solaris origin online http://pkg.oracle.com/solaris/release/ So we can see we get solaris packages from pkg.oracle.com.  The package name is system/core-os. These can be arbitrary length, just to allow you to group similar packages together. Now on the the interesting? bit, the versions, everything after the @ is part of the version. IPS will only upgrade to a "higher" version. [email protected],5.11-0.175.0.0.0.2.1:20111019T070457Z core-os = Package Name0.5.11 = Component - in this case we're saying it's a SunOS 5.11 package, = separator5.11 = Built on version - to indicate what OS version you built the package on- = another separator0.175.0.0.0.2.1 = Branch Version : = yet another separator20111019T070457Z = Time stamp when the package was published So from that we can see the Branch Version seems rather complex. It is necessarily so, to allow us to describe the hierachy of releases we do In this example we see the following 0.175: is known as the trunkid, and is incremented each build of a new release of Solaris. During Solaris 11 this should not change  0: is the Update release for Solaris. 0 for FCS, 1 for update 1 etc 0: is the SRU for Solaris. 0 for FCS, 1 for SRU 1 etc 0: is reserved for future use 2: Build number of the SRU 1: Nightly ID - only important for Solaris developersTake a hypothetical example [email protected],5.11-0.175.1.5.0.4.1:<something> This would be build 4 of SRU 5 of Update 1 of Solaris 11 This is actually documented in a MOS article 1378134.1 Which you can read if you have a support contract.

  Read the article

• Cloud hosted CI for .NET projects

  - by Scott Dorman

  Originally posted on: http://geekswithblogs.net/sdorman/archive/2014/06/02/cloud-hosted-ci-for-.net-projects.aspxContinuous integration (CI) is important. If you don’t have it set up…you should. There are a lot of different options available for hosting your own CI server, but they all require you to maintain your own infrastructure. If you’re a business, that generally isn’t a problem. However, if you have some open source projects hosted, for example on GitHub, there haven’t really been any options. That has changed with the latest release of AppVeyor, which bills itself as “Continuous integration for busy developers.” What’s different about AppVeyor is that it’s a hosted solution. Why is that important? By being a hosted solution, it means that I don’t have to maintain my own infrastructure for a build server. How does that help if you’re hosting an open source project? AppVeyor has a really competitive pricing plan. For an unlimited amount of public repositories, it’s free. That gives you a cloud hosted CI system for all of your GitHub projects for the cost of some time to set them up, which actually isn’t hard to do at all. I have several open source projects (hosted at https://github.com/scottdorman), so I signed up using my GitHub credentials. AppVeyor fully supported my two-factor authentication with GitHub, so I never once had to enter my password for GitHub into AppVeyor. Once it was done, I authorized GitHub and it instantly found all of the repositories I have (both the ones I created and the ones I cloned from elsewhere). You can even add “build badges” to your markdown files in GitHub, so anyone who visits your project can see the status of the lasted build. Out of the box, you can simply select a repository, add the build project, click New Build and wait for the build to complete. You now have a complete CI server running for your project. The best part of this, besides the fact that it “just worked” with almost zero configuration is that you can configure it through a web-based interface which is very streamlined, clean and easy to use or you can use a appveyor.yml file. This means that you can define your CI build process (including any scripts that might need to be run, etc.) in a standard file format (the YAML format) and store it in your repository. The benefits to that are huge. The file becomes a versioned artifact in your source control system, so it can be branched, merged, and is completely transparent to anyone working on the project. By the way, AppVeyor isn’t limited to just GitHub. It currently supports GitHub, BitBucket, Visual Studio Online, and Kiln. I did have a few issues getting one of my projects to build, but the same day I posted the problem to the support forum a fix was deployed, and I had a functioning CI build about 5 minutes after that. Since then, I’ve provided some additional feature requests and had a few other questions, all of which have seen responses within a 24-hour period. I have to say that it’s easily been one of the best customer support experiences I’ve seen in a long time. AppVeyor is still young, so it doesn’t yet have full feature parity with some of the older (more established) CI systems available,  but it’s getting better all the time and I have no doubt that it will quickly catch up to those other CI systems and then pass them. The bottom line, if you’re looking for a good cloud-hosted CI system for your .NET-based projects, look at AppVeyor.

  Read the article

• Omni-directional light shadow mapping with cubemaps in WebGL

  - by Winged

  First of all I must say, that I have read a lot of posts describing an usage of cubemaps, but I'm still confused about how to use them. My goal is to achieve a simple omni-directional (point) light type shading in my WebGL application. I know that there is a lot more techniques (like using Two-Hemispheres or Camera Space Shadow Mapping) which are way more efficient, but for an educational purpose cubemaps are my primary goal. Till now, I have adapted a simple shadow mapping which works with spotlights (with one exception: I don't know how to cut off the glitchy part beyond the reach of a single shadow map texture): glitchy shadow mapping<<< So for now, this is how I understand the usage of cubemaps in shadow mapping: Setup a framebuffer (in case of cubemaps - 6 framebuffers; 6 instead of 1 because every usage of framebufferTexture2D slows down an execution which is nicely described here <<<) and a texture cubemap. Also in WebGL depth components are not well supported, so I need to render it to RGBA first. this.texture = gl.createTexture(); gl.bindTexture(gl.TEXTURE_CUBE_MAP, this.texture); gl.texParameteri(gl.TEXTURE_CUBE_MAP, gl.TEXTURE_MIN_FILTER, gl.LINEAR); gl.texParameteri(gl.TEXTURE_CUBE_MAP, gl.TEXTURE_MAG_FILTER, gl.LINEAR); for (var face = 0; face < 6; face++) gl.texImage2D(gl.TEXTURE_CUBE_MAP_POSITIVE_X + face, 0, gl.RGBA, this.size, this.size, 0, gl.RGBA, gl.UNSIGNED_BYTE, null); gl.bindTexture(gl.TEXTURE_CUBE_MAP, null); this.framebuffer = []; for (face = 0; face < 6; face++) { this.framebuffer[face] = gl.createFramebuffer(); gl.bindFramebuffer(gl.FRAMEBUFFER, this.framebuffer[face]); gl.framebufferTexture2D(gl.FRAMEBUFFER, gl.COLOR_ATTACHMENT0, gl.TEXTURE_CUBE_MAP_POSITIVE_X + face, this.texture, 0); gl.framebufferRenderbuffer(gl.FRAMEBUFFER, gl.DEPTH_ATTACHMENT, gl.RENDERBUFFER, this.depthbuffer); var e = gl.checkFramebufferStatus(gl.FRAMEBUFFER); // Check for errors if (e !== gl.FRAMEBUFFER_COMPLETE) throw "Cubemap framebuffer object is incomplete: " + e.toString(); } Setup the light and the camera (I'm not sure if should I store all of 6 view matrices and send them to shaders later, or is there a way to do it with just one view matrix). Render the scene 6 times from the light's position, each time in another direction (X, -X, Y, -Y, Z, -Z) for (var face = 0; face < 6; face++) { gl.bindFramebuffer(gl.FRAMEBUFFER, shadow.buffer.framebuffer[face]); gl.viewport(0, 0, shadow.buffer.size, shadow.buffer.size); gl.clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT); camera.lookAt( light.position.add( cubeMapDirections[face] ) ); scene.draw(shadow.program); } In a second pass, calculate the projection a a current vertex using light's projection and view matrix. Now I don't know If should I calculate 6 of them, because of 6 faces of a cubemap. ScaleMatrix pushes the projected vertex into the 0.0 - 1.0 region. vDepthPosition = ScaleMatrix * uPMatrixFromLight * uVMatrixFromLight * vWorldVertex; In a fragment shader calculate the distance between the current vertex and the light position and check if it's deeper then the depth information read from earlier rendered shadow map. I know how to do it with a 2D Texture, but I have no idea how should I use cubemap texture here. I have read that texture lookups into cubemaps are performed by a normal vector instead of a UV coordinate. What vector should I use? Just a normalized vector pointing to the current vertex? For now, my code for this part looks like this (not working yet): float shadow = 1.0; vec3 depth = vDepthPosition.xyz / vDepthPosition.w; depth.z = length(vWorldVertex.xyz - uLightPosition) * linearDepthConstant; float shadowDepth = unpack(textureCube(uDepthMapSampler, vWorldVertex.xyz)); if (depth.z > shadowDepth) shadow = 0.5; Could you give me some hints or examples (preferably in WebGL code) how I should build it?

  Read the article

• PASS Summit 2013 Review

  - by Ajarn Mark Caldwell

  As a long-standing member of PASS who lives in the greater Seattle area and has attended about nine of these Summits, let me start out by saying how GREAT it was to go to Charlotte, North Carolina this year.  Many of the new folks that I met at the Summit this year, upon hearing that I was from Seattle, commented that I must have been disappointed to have to travel to the Summit this year after 5 years in a row in Seattle.  Well, nothing could be further from the truth.  I cheered loudly when I first heard that the 2013 Summit would be outside Seattle.  I have many fond memories of trips to Orlando, Florida and Grapevine, Texas for past Summits (missed out on Denver, unfortunately).  And there is a funny dynamic that takes place when the conference is local.  If you do as I have done the last several years and saved my company money by not getting a hotel, but rather just commuting from home, then both family and coworkers tend to act like you’re just on a normal schedule.  For example, I have a young family, and my wife and kids really wanted to still see me come home “after work”, but there are a whole lot of after-hours activities, social events, and great food to be enjoyed at the Summit each year.  Even more so if you really capitalize on the opportunities to meet face-to-face with people you either met at previous summits or have spoken to or heard of, from Twitter, blogs, and forums.  Then there is also the lovely commuting in Seattle traffic from neighboring cities rather than the convenience of just walking across the street from your hotel.  So I’m just saying, there are really nice aspects of having the conference 2500 miles away. Beyond that, the training was fantastic as usual.  The SQL Server community has many outstanding presenters and experts with deep knowledge of the tools who are extremely willing to share all of that with anyone who wants to listen.  The opening video with PASS President Bill Graziano in a NASCAR race turned dream sequence was very well done, and the keynotes, as usual, were great.  This year I was particularly impressed with how well attended were the Professional Development sessions.  Not too many years ago, those were very sparsely attended, but this year, the two that I attended were standing-room only, and these were not tiny rooms.  I would say this is a testament to both the maturity of the attendees realizing how important these topics are to career success, as well as to the ever-increasing skills of the presenters and the program committee for selecting speakers and topics that resonated with people.  If, as is usually the case, you were not able to get to every session that you wanted to because there were just too darn many good ones, I encourage you to get the recordings. Overall, it was a great time as these events always are.  It was wonderful to see old friends and make new ones, and the people of Charlotte did an awesome job hosting the event and letting their hospitality shine (extra kudos to SQLSentry for all they did with the shuttle, maps, and other event sponsorships).  We’re back in Seattle next year (it is a release year, after all) but I would say that with the success of this year’s event, I strongly encourage the Board and PASS HQ to firmly reestablish the location rotation schedule.  I’ll even go so far as to suggest standardizing on an alternating Seattle – Charlotte schedule, or something like that. If you missed the Summit this year, start saving now, and register early, so you can join us!

  Read the article

• Find Rules and Defaults using the PowerShell for SQL Server 2008 Provider

  - by BuckWoody

  I ran into an issue the other day where I couldn't set up some features in SQL Server 2008 because they ddon't support the use of Rules or Defaults. Let me explain a little more about that. In older versions of SQL Server, you could decalre a "Rule" or "Default" just like you do with a Table Constraint today. You would then "bind" these rules or defaults to the tables you wanted them to apply to. Sure, there are advantages and disadvantages to this approach, but it certainly isn't standard Data Definition Language (DDL), so they are deprecated and many features don't work with them any more. Honestly, it's been so long since I've seen them in use I had forgotten to even check for them. My suspicion is that this was a new database created with an older script. Nevertheless, the feature failed when it ran into one. Immediately I thought that I had better build some logic into my process to try and catch those - but how? Lots of choices here, but since I was using PowerShell to do the rest of the work, I thought I would investigate how easy it would be just to do it there. And using the SQL Server 2008 provider, this could not be simpler. I won't show all of the scrupt here, because I was testing for these as a condition and then bailing out of the script and sending a notification, but all it is using is the DIR command! Here's an example on my "UNIVAC" computer for the "pubs" database: Find Rules using PowerShell: dir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases\pubs\Rulesdir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases\pubs\Defaults And this one will look in all databases:  #All Databases:dir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases | select-object -property Name, Rules, Defaults Awesome. Love me some PowerShell. Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Webcast Q&A: ResCare Solves Content Lifecycle Challenges with Oracle WebCenter

  - by Kellsey Ruppel

  Last week we had the fourth webcast in our WebCenter in Action webcast series, "ResCare Solves Content Lifecycle Challenges with Oracle WebCenter", where customer Joe Lichtefeld from ResCare and Wayne Boerger & Doug Thompson from Oracle Partner TEAM Informatics shared how Oracle WebCenter is powering allowing ResCare to solve content lifecycle challenges, reduce compliance and business risks, and increase adoption of intranet as primary business communication tool In case you missed it, here's a recap of the Q&A.   Joe Lichtefeld, ResCare  Q: Did you run into any issues in the deployment of the platform?A: We experienced very few issues when implementing the content management and search functionalities. There were some challenges in determining the metadata structure. We tried to find a fine balance between having enough fields to provide the functionality needed, but trying to limit the impact to the contributing members.  Q: What has been the biggest benefit your end users have seen?A: The biggest benefit to date is two-fold. Content on the intranet can be maintained by the individual contributors more timely than in our old process of all requests being updated by IT. The other big benefit is the ability to find the most current version of a document instead of relying on emails and phone calls to track down the "current" version. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: We experienced very little resistance. Most of our community groups were eager to be able to contribute and maintain their information. We had the normal hurdles of training and follow-up training with implementing a new system and process. As our second phase rolled out access to all employees, we have received more positive feedback on the accessibility of information. Wayne Boerger & Doug Thompson, TEAM Informatics Q: Can you integrate multiple repositories with the Google Search Appliance? Yes, the Google Search Appliance is designed to index lots of different repositories, from both public and internal sources. There are included connectors to many repositories, such as SharePoint, databases, file systems, LDAP, and with the TEAM GSA Connector and the Oracle Content Server. And the index for these repositories can be configured into different collections depending on the use cases that each customer has, and really, for each need within a customer environment. Q: How many different filters can you add when the search results are returned? A: Presuming this question is about the filtering on the search results. You can add as many filters as you like and it can be done by collection or any number of other criteria. Most importantly, customers now have the ability to limit the returned content by a set metadata value. Q: With the TEAM Sites Connector, what types of content can you sync? A: There’s really no limit; if it can be checked into the content server, then it is eligible for sync into Sites.  So basically, any digital file that has relevance to a Sites implementation can be checked into the WC Content central repository and then the connector can/will manage it. Q: Using the Connector, are there any limitations around where in Sites that synced content can be used? A: There are no limitations about where it can be used. When setting up your environment to use it, you just need to think through the different destinations on the Sites side that might use the content; that way you’ve got the right information to create the rules needed for the connector. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action!  ResCare Solves Content Lifecycle Challenges with Oracle WebCenter from Oracle WebCenter

  Read the article

• Let Me Show You Something: Instagram, Vine and Snapchat for Brands

  - by Mike Stiles

  While brands are well aware of how much more impactful images are than text-only posts on social channels, today you’re additionally being presented with platform after additional platform for hosting, doctoring and sharing photos and videos.  Can you play in every sandbox? And if you do, can you be brilliant on all of them? As has usually been the case, so far brands are sticking their toes into new platforms while not actually committing to them, or strategizing for them, or resourcing them. TrackMaven found of the 123 F500 companies using Instagram, only 22% of them are active on it. Likewise, research from Simply Measured found brands are indeed jumping in, with the number establishing a presence on Instagram up 55% over the past year. Users want them there…brand engagement has exploded 350%, and over 1/3 of the top brands have at least 10,000 followers. BUT…the top 10 brands are generating 33% of all posts, reaping 83% of all engagement. Things are also growing on Twitter’s Vine, the 6-second looping video app that hit 40 million users in August. The 7th Chamber says 5 tweets a second contain a Vine link. Other studies say branded Vines are 4 times more likely to be shared and seen than rank-and-file branded videos. Why? Users know that even if a video is pure junk, they won’t get robbed of too much of their valuable time. Vine is always upgrading so you can make sure your videos are worth viewers’ time. You can now edit videos, and save & work on several projects concurrently. What you can’t do is upload a finely crafted video into Vine, but you can do that with Instagram. The key to success? Same as with all other content; make it of value. Deliver a laugh or a lesson or both. How-to, behind the scenes peeks, contests, demos, all make sense in the short video format. Or follow Nash Grier’s example, which is to just have fun with and connect to your viewers, earning their trust that your next Vine will be as good as the last. Nash is only 15, has over 1.4 million followers, and adds about 100,000 a week. He broke out when one of his videos was re-Vined by some other kid with 300,000 followers. Make good stuff, get it in front of influencers, and your brand Vines could break out as well. Then there’s Snapchat, the “this photo will self destruct” platform. How can that be of use to brands besides offering coupons that really expire? The jury is out. But with an audience of over 100 million and a valuation of $800 million, media-with-a-time-limit is compelling. Now there’s “Snapchat Stories” that can last 24 hours and be shared to the public at large. You might be able to capitalize on how much more focus gets put on content when there’s a time limit on its availability. The underlying truth to all of this is, these are all tools. Very cool, feature rich tools, but tools. You can give the exact same art kit to 5 different people and you’d get back 5 very different works, ranging from worthless garbage to masterpiece. Brands are being called upon to be still and moving image artists. That’s what your customers are used to seeing, from a variety of sources. Commit to communicating with them accordingly. @mikestiles Photo: stock.xchng

  Read the article

• Unable to Sign in to the Microsoft Online Services Signin application from Windows 7 client located behind ISA firewall

  - by Ravindra Pamidi

  A while ago i helped a customer troubleshoot authentication problem with Microsoft Online Services Signin application.  This customer was evaluating Microsoft BPOS (Business Productivity Online Services) and was having trouble using the single sign on application behind ISA 2004 firewall.The network structure is fairly simple with single Windows 2003 Active Directory domain and Windows 7 clients. On a successful logon to the Microsoft Online Services Signin application, this application provides single signon functionality to all of Microsoft online services in the BPOS package. Symptoms:When trying to signin it fails with error "The service is currently unavailable. Please try again later. If problems continue, contact your service administrator". If ISA 2004 firewall is removed from the picture the authentication succeeds.Troubleshooting: Enabled ISA Server firewall logging along with Microsoft Network Monitor tool on the Windows 7 Client while reproducing the issue. Analysis of the ISA Server Firewall logs and Microsoft Network capture revealed that the Microsoft Online Services Sign In application when sending request to ISA Server does not send the domain credentials and as a result ISA Server responds with an error code of HTTP 407 Proxy authentication required listing out the supported authentication mechanisms.  The application in question is expected to send the credentials of the domain user in response to this request. However in this case, it fails to send the logged on user's domain credentials. Bit of researching on the Internet revealed that The "Microsoft Online Services Sign In" application by default does not support Outbound Internet Proxy authentication. In order for it to send the logged on user's domain credentials we had to make  changes to its configuration file "SignIn.exe.config" located under "Program Files\Microsoft Online Services\Sign In" folder. Step by Step details to configure the configuration file are documented on Microsoft TechNet website given below.  Configure your outbound authenticating proxy serverhttp://www.microsoft.com/online/help/en-us/helphowto/cc54100d-d149-45a9-8e96-f248ecb1b596.htm After the above problem was addressed we were still not able to use the "Microsoft Online Services Sign In" application and it failed with the same error.  Analysis of another network capture revealed that the application in question is now sending the required credentials and the connection seems to terminate at a later stage. Enabled verbose logging for the "Microsoft Online Services Sign In" application and then reproduced the problem. Analysis of the logs revealed a time difference between the local client and Microsoft Online services server of around seven minutes which is above the acceptable time skew of five minutes. Excerpt from Microsoft Online Services Sign In application verbose log:  1/26/2012 1:57:51 PM Verbose SingleSignOn.GetSSOGenericInterface SSO Interface URL: https://signinservice.apac.microsoftonline.com/ssoservice/UID1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn The security timestamp is invalid because its creation time ('2012-01-26T08:34:52.767Z') is in the future. Current time is '2012-01-26T08:27:52.987Z' and allowed clock skew is '00:05:00'.1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn  Although the Windows 7 Clients successfully synchronized time to the domain controller for the domain, the domain controller was not configured to synchronize time with external NTP servers. This caused a gradual drift in time on the network thus resulting in the above issue. Reconfigured the domain controller holding the PDC FSMO role to synchronize time with external time source ( time.nist.gov ) and edited the system policy on the ISA server firewall to allow NTP traffic to time.nist.gov Configure the time source for the forest:Windows Time Servicehttp://technet.microsoft.com/en-us/library/cc794937(WS.10).aspx Forced synchronization of Windows time using the command w32tm /resync on the domain controller and later on the clients each of which had corrected the seven minutes difference. This resolved the problem with logon to Microsoft Online Services Sign In.

  Read the article

• Efficiently separating Read/Compute/Write steps for concurrent processing of entities in Entity/Component systems

  - by TravisG

  Setup I have an entity-component architecture where Entities can have a set of attributes (which are pure data with no behavior) and there exist systems that run the entity logic which act on that data. Essentially, in somewhat pseudo-code: Entity { id; map<id_type, Attribute> attributes; } System { update(); vector<Entity> entities; } A system that just moves along all entities at a constant rate might be MovementSystem extends System { update() { for each entity in entities position = entity.attributes["position"]; position += vec3(1,1,1); } } Essentially, I'm trying to parallelise update() as efficiently as possible. This can be done by running entire systems in parallel, or by giving each update() of one system a couple of components so different threads can execute the update of the same system, but for a different subset of entities registered with that system. Problem In reality, these systems sometimes require that entities interact(/read/write data from/to) each other, sometimes within the same system (e.g. an AI system that reads state from other entities surrounding the current processed entity), but sometimes between different systems that depend on each other (i.e. a movement system that requires data from a system that processes user input). Now, when trying to parallelize the update phases of entity/component systems, the phases in which data (components/attributes) from Entities are read and used to compute something, and the phase where the modified data is written back to entities need to be separated in order to avoid data races. Otherwise the only way (not taking into account just "critical section"ing everything) to avoid them is to serialize parts of the update process that depend on other parts. This seems ugly. To me it would seem more elegant to be able to (ideally) have all processing running in parallel, where a system may read data from all entities as it wishes, but doesn't write modifications to that data back until some later point. The fact that this is even possible is based on the assumption that modification write-backs are usually very small in complexity, and don't require much performance, whereas computations are very expensive (relatively). So the overhead added by a delayed-write phase might be evened out by more efficient updating of entities (by having threads work more % of the time instead of waiting). A concrete example of this might be a system that updates physics. The system needs to both read and write a lot of data to and from entities. Optimally, there would be a system in place where all available threads update a subset of all entities registered with the physics system. In the case of the physics system this isn't trivially possible because of race conditions. So without a workaround, we would have to find other systems to run in parallel (which don't modify the same data as the physics system), other wise the remaining threads are waiting and wasting time. However, that has disadvantages Practically, the L3 cache is pretty much always better utilized when updating a large system with multiple threads, as opposed to multiple systems at once, which all act on different sets of data. Finding and assembling other systems to run in parallel can be extremely time consuming to design well enough to optimize performance. Sometimes, it might even not be possible at all because a system just depends on data that is touched by all other systems. Solution? In my thinking, a possible solution would be a system where reading/updating and writing of data is separated, so that in one expensive phase, systems only read data and compute what they need to compute, and then in a separate, performance-wise cheap, write phase, attributes of entities that needed to be modified are finally written back to the entities. The Question How might such a system be implemented to achieve optimal performance, as well as making programmer life easier? What are the implementation details of such a system and what might have to be changed in the existing EC-architecture to accommodate this solution?

  Read the article

• How to convert pitch and yaw to x, y, z rotations?

  - by Aaron Anodide

  I'm a beginner using XNA to try and make a 3D Asteroids game. I'm really close to having my space ship drive around as if it had thrusters for pitch and yaw. The problem is I can't quite figure out how to translate the rotations, for instance, when I pitch forward 45 degrees and then start to turn - in this case there should be rotation being applied to all three directions to get the "diagonal yaw" - right? I thought I had it right with the calculations below, but they cause a partly pitched forward ship to wobble instead of turn.... :( So my quesiton is: how do you calculate the X, Y, and Z rotations for an object in terms of pitch and yaw? Here's current (almost working) calculations for the Rotation acceleration: float accel = .75f; // Thrust +Y / Forward if (currentKeyboardState.IsKeyDown(Keys.I)) { this.ship.AccelerationY += (float)Math.Cos(this.ship.RotationZ) * accel; this.ship.AccelerationX += (float)Math.Sin(this.ship.RotationZ) * -accel; this.ship.AccelerationZ += (float)Math.Sin(this.ship.RotationX) * accel; } // Rotation +Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.J)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * accel; } // Rotation -Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.K)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * -accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * -accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * -accel; } // Rotation +X / Pitch if (currentKeyboardState.IsKeyDown(Keys.F)) { this.ship.RotationAccelerationX += accel; } // Rotation -X / Pitch if (currentKeyboardState.IsKeyDown(Keys.D)) { this.ship.RotationAccelerationX -= accel; } I'm combining that with drawing code that does a rotation to the model: public void Draw(Matrix world, Matrix view, Matrix projection, TimeSpan elsapsedTime) { float seconds = (float)elsapsedTime.TotalSeconds; // update velocity based on acceleration this.VelocityX += this.AccelerationX * seconds; this.VelocityY += this.AccelerationY * seconds; this.VelocityZ += this.AccelerationZ * seconds; // update position based on velocity this.PositionX += this.VelocityX * seconds; this.PositionY += this.VelocityY * seconds; this.PositionZ += this.VelocityZ * seconds; // update rotational velocity based on rotational acceleration this.RotationVelocityX += this.RotationAccelerationX * seconds; this.RotationVelocityY += this.RotationAccelerationY * seconds; this.RotationVelocityZ += this.RotationAccelerationZ * seconds; // update rotation based on rotational velocity this.RotationX += this.RotationVelocityX * seconds; this.RotationY += this.RotationVelocityY * seconds; this.RotationZ += this.RotationVelocityZ * seconds; Matrix translation = Matrix.CreateTranslation(PositionX, PositionY, PositionZ); Matrix rotation = Matrix.CreateRotationX(RotationX) * Matrix.CreateRotationY(RotationY) * Matrix.CreateRotationZ(RotationZ); model.Root.Transform = rotation * translation * world; model.CopyAbsoluteBoneTransformsTo(boneTransforms); foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = boneTransforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } mesh.Draw(); } }

  Read the article

• jrunscript as a cross platform scripting environment

  - by user12798506

  ?????????????????????????????????????????????????????????sh????????????UNIX???????????????????sh???????????????????????????????????????????Windows????????????????? sh??????????????find?grep?sed?awk???Windows??????????????????????????????????????????????????????????????????????????????????????????????Windows???Cygwin????????????sh??????Windows??????????????Cygwin????????????????????????????????????????????JDK?????jrunscript?????JavaScript???????????????????????1?????????jrunscript??????????????????? Windows???UNIX??????????????????????? find?grep?sed?awk?????????sh???????????????Windows Script Host??????? Java????????????? ??????????????????????????????????????????????????????????(?????????????????????????????????????????) ?????????????JDK 6??????????????????????????PC????????????????JDK 6?PC????????????????????????????????????JDK????????????????????????????????????????jrunscript?????????????????????????? ?????jrunscript????JavaScript?????????????????????????????????????????? 1) Windows???UNIX????????????????? ?????????????????????????????????????????JavaScript???mytool.js???????????????????????jrunscript???????????UNIX????sh???????Windows????bat????????????????????? mytool.sh (UNIX?): #!/bin/sh bindir=$(cd $(dirname $0) && pwd) case "`uname`" in CYGWIN*) bindir=`cygpath -w "$bindir"` ;; esac jrunscript "${bindir}/mytool.js" $* mytool.bat (Windows?): @echo off set bindir=%~dp0 jrunscript "%bindir%mytool.js" %* UNIX??sh????????Cygwin???????????????????????????????????????????js??????????????UNIX?Windows??????????????????????????????? 2) jrunscript??cat, cp, find?grep?????? jrunscript???UNIX?????????????????????????????????? jrunscript JavaScript built-in functions ????UNIX??sh?????????????????????UNIX?????????????????????????????????????????src??????????java????????????enum???????java?????????????????????????????????????????????? find('src', '.*.java', function(f) { grep('enum', f); }); ???????UNIX?????????????????????????????????????????????????????????????????????????????????????????cp(from, to)??????????????????????????????????????????UNIX??????????? $ cp -r src/* tmp/ ?????????????????????????????????????????find()???????cp -r????????·?????????????????????? function cpr(fromdir, todir, pattern) { if (pattern == undefined) { pattern = ".*"; } var frdir = pathToFile(fromdir).getCanonicalPath(); find(fromdir, pattern, function(f) { // relative dir of file f from 'fromdir'. var relative = f.getParentFile().getCanonicalPath().substring(frdir.length() + 1); var dstdir = pathToFile(todir + "/" + relative); if (!dstdir.exists()) { // Create the destination dir for file f. mkdirs(dstdir); } // Copy file f to 'dstdir'. cp(f, dstdir + "/" + f.getName()); }); } java?????I/O?API??Windows?????????????"/"??????????????????????????????UNIX?Windows?????????????? ????????????exec(cmd)?????????jar???????????????????????????????????????????? $ jrunscript js> exec("jar xvf example.jar") META-INF/ ?????????????µ???B META-INF/MANIFEST.MF ???W?J???????µ???B com/ ?????????????µ???B com/example/ ?????????????µ???B com/example/Bar.class ???W?J???????µ???B com/example/dummy/ ?????????????µ???B com/example/dummy/dummy.txt ?????o???????µ???B com/example/dummy.properties ?????o???????µ???B com/example/Foo.class ???W?J???????µ???B ???exec()?????????????????????????????????????????????????????????????????Windows????????????I/O??????????????????????????????????BAT????????? errmsg.bat: for /L %%i in (1,1,50) do echo "Error Message count = %%i" 1&2 jrunscript??exec()???????????????18??????????????????????????????????? C:\tmp>jrunscript -e "exec('errmsg.bat')" C:\tmp>for /L %i in (1 1 100) do echo "Error Message count = %i" 1>&2 C:\tmp>echo "Error Message count = 1" 1>&2 : C:\tmp>echo "Error Message count = 18" 1>&2 ? ??? ???????????exec()?????????????????????????????????????????????????????????????????DataInputStream???????????????????????? $ jrunscript js this["exec"].toString() function exec(cmd) { var process = java.lang.Runtime.getRuntime().exec(cmd); var inp = new DataInputStream(process.getInputStream()); var line = null; while ((line = inp.readLine()) != null) { println(line); } process.waitFor(); $exit = process.exitValue(); } ?????????????????????????????????????????????????????exec()???????????????exec()?????????????????????????????exec()??????? function exec(cmd) { var process = java.lang.Runtime.getRuntime().exec(cmd); var stdworker = new java.lang.Runnable( {run: function() { cat(process.getInputStream()); }}); var errworker = new java.lang.Runnable( {run: function() { cat(process.getErrorStream()); }}); new java.lang.Thread(stdworker).start(); new java.lang.Thread(errworker).start(); return proc.waitFor(); } ???????????????????cat()???????????cat()?InputStreamReader?????????????????????????????????????????????????? 3) JavaScript???????????????? JavaScript?Java???????????????????????JavaScript????????????Ruby?Groovy?Scala???????????????????????????????????????????????10MB?????????????????????????????????????JavaScript????????????????????KB?????????????MB?JAR??????????????????????????JRE?JDK?????????????????????????????????????????

  Read the article

• Need WIF Training?

  - by Your DisplayName here!

  I spend numerous hours every month answering questions about WIF and identity in general. This made me realize that this is still quite a complicated topic once you go beyond the standard fedutil stuff. My good friend Brock and I put together a two day training course about WIF that covers everything we think is important. The course includes extensive lab material where you take standard application and apply all kinds of claims and federation techniques and technologies like WS-Federation, WS-Trust, session management, delegation, home realm discovery, multiple identity providers, Access Control Service, REST, SWT and OAuth. The lab also includes the latest version of the thinktecture identityserver and you will learn how to use and customize it. If you are looking for an open enrollment style of training, have a look here. Or contact me directly! The course outline looks as follows: Day 1 Intro to Claims-based Identity & the Windows Identity Foundation WIF introduces important concepts like conversion of security tokens and credentials to claims, claims transformation and claims-based authorization. In this module you will learn the basics of the WIF programming model and how WIF integrates into existing .NET code. Externalizing Authentication for Web Applications WIF includes support for the WS-Federation protocol. This protocol allows separating business and authentication logic into separate (distributed) applications. The authentication part is called identity provider or in more general terms - a security token service. This module looks at this scenario both from an application and identity provider point of view and walks you through the necessary concepts to centralize application login logic both using a standard product like Active Directory Federation Services as well as a custom token service using WIF’s API support. Externalizing Authentication for SOAP Services One big benefit of WIF is that it unifies the security programming model for ASP.NET and WCF. In the spirit of the preceding modules, we will have a look at how WIF integrates into the (SOAP) web service world. You will learn how to separate authentication into a separate service using the WS-Trust protocol and how WIF can simplify the WCF security model and extensibility API. Day 2 Advanced Topics:  Security Token Service Architecture, Delegation and Federation The preceding modules covered the 80/20 cases of WIF in combination with ASP.NET and WCF. In many scenarios this is just the tip of the iceberg. Especially when two business partners decide to federate, you usually have to deal with multiple token services and their implications in application design. Identity delegation is a feature that allows transporting the client identity over a chain of service invocations to make authorization decisions over multiple hops. In addition you will learn about the principal architecture of a STS, how to customize the one that comes with this training course, as well as how to build your own. Outsourcing Authentication:  Windows Azure & the Azure AppFabric Access Control Service Microsoft provides a multi-tenant security token service as part of the Azure platform cloud offering. This is an interesting product because it allows to outsource vital infrastructure services to a managed environment that guarantees uptime and scalability. Another advantage of the Access Control Service is, that it allows easy integration of both the “enterprise” protocols like WS-* as well as “web identities” like LiveID, Google or Facebook into your applications. ACS acts as a protocol bridge in this case where the application developer doesn’t need to implement all these protocols, but simply uses a service to make it happen. Claims & Federation for the Web and Mobile World Also the web & mobile world moves to a token and claims-based model. While the mechanics are almost identical, other protocols and token types are used to achieve better HTTP (REST) and JavaScript integration for in-browser applications and small footprint devices. Also patterns like how to allow third party applications to work with your data without having to disclose your credentials are important concepts in these application types. The nice thing about WIF and its powerful base APIs and abstractions is that it can shield application logic from these details while you can focus on implementing the actual application. HTH

  Read the article

• Production Access Denied! Who caused this rule anyways?

  - by Matt Watson

  One of the biggest challenges for most developers is getting access to production servers. In smaller dev teams of less than about 5 people everyone usually has access. Then you hire developer #6, he messes something up in production... and now nobody has access. That is how it always starts in small dev teams. I think just about every rule of life there is gets created this way. One person messes it up for the rest of us. Rules are then put in place to try and prevent it from happening again.Breaking the rules is in our nature. In this example it is for good cause and a necessity to support our applications and troubleshoot problems as they arise. So how do developers typically break the rules? Some create their own method to collect log files off servers so they can see them. Expensive log management programs can collect log files, but log files alone are not enough. Centralizing where important errors are logged to is common. Some lucky developers are given production server access by the IT operations team out of necessity. Wait. That's not fair to all developers and knowingly breaks the company rule!  When customers complain or the system is down, the rules go out the window. Commonly lead developers get production access because they are ultimately responsible for supporting the application and may be the only person who knows how to fix it. The problem with only giving lead developers production access is it doesn't scale from a support standpoint. Those key employees become the go to people to help solve application problems, but they also become a bottleneck. They end up spending up to half of their time every day helping resolve application defects, performance problems, or whatever the fire of the day is. This actually the last thing you want your lead developers doing. They should be working on something more strategic like major enhancements to the product. Having production access can actually be a curse if you are the guy stuck hunting down log files all day. Application defects are good tasks for junior developers. They can usually handle figuring out simple application problems. But nothing is worse than being a junior developer who can't figure out those problems and the back log of them grows and grows. Some of them require production server access to verify a deployment was done correctly, verify config settings, view log files, or maybe just restart an application. Since the junior developers don't have access, they end up bugging the developers who do have access or they track down a system admin to help. It can take hours or days to see server information that would take seconds or minutes if they had access of their own. It is very frustrating to the developer trying to solve the problem, the system admin being forced to help, and most importantly your customers who are not happy about the situation. This process is terribly inefficient. Production database access is also important for solving application problems, but presents a lot of risk if developers are given access. They could see data they shouldn't.  They could write queries on accident to update data, delete data, or merely select every record from every table and bring your database to its knees. Since most of the application we create are data driven, it can be very difficult to track down application bugs without access to the production databases.Besides it being against the rule, why don't all developers have access? Most of the time it comes down to security, change of control, lack of training, and other valid reasons. Developers have been known to tinker with different settings to try and solve a problem and in the process forget what they changed and made the problem worse. So it is a double edge sword. Don't give them access and fixing bugs is more difficult, or give them access and risk having more bugs or major outages being created!Matt WatsonFounder, CEOStackifyAgile Support for Agile Developers

  Read the article

< Previous Page | 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607  | Next Page >